gnOduCfgFreqDevider
CERAGON-MIB ·
.1.3.6.1.4.1.2281.3.1.1.1.22
Object
column
mandatory
Integer32
Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000)
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.3.1.1.1.22- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- gnOduCfgEntry
- Table
- gnOduCfgTable
- Siblings
- 21
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnOduCfgTransmitterFrequency mandatory This parameter indicates the radio TX channel number.
WRITE will change the LOCAL side only.
Not all radios will support TX frequency change via channel numbers. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.1 |
| gnOduCfgMinTxFreqNumber mandatory This the Minimum TX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.10 |
| gnOduCfgMaxTxFreqNumber mandatory This the Maximum TX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.11 |
| gnOduCfgMaxTxLevel mandatory This is the theoretical maximum level that this ODU unit
can transmit. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.12 |
| gnOduCfgRefRsl mandatory This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.13 |
| gnOduCfgForceRmtMuteTx mandatory When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit) | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.14 |
| gnOduCfgForceRmtMaxTx mandatory This parameter force the transmitter output power level of the signal
transmitted by the radio. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.15 |
| gnOduCfgTLPerfMonThresh1 mandatory When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.16 |
| gnOduCfgMinRxFreqNumber mandatory This the Minimum RX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.17 |
| gnOduCfgMaxRxFreqNumber mandatory This the Maximum RX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.18 |
| gnOduCfgOduLoopSupport mandatory Indication for loopback support by the connected ODU. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.19 |
| gnOduCfgRLPerfMonThresh1 mandatory When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.2 |
| gnOduCfgOduModel mandatory . | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.20 |
| gnOduCfgFreqPlanStandard mandatory For the NMS use. | column | OctetString | .1.3.6.1.4.1.2281.3.1.1.1.21 |
| gnOduCfgRLPerfMonThresh2 mandatory When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.3 |
| gnOduCfgATPCStatus mandatory This parameter indicates if the ATPC option is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.4 |
| gnOduCfgMUTEStatus mandatory This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit) | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.5 |
| gnOduCfgAntennaType mandatory This parameter indicates the size of the antenna used
in the ODU. This attribute will not auto-detect the antenna size.
It is used for the unfaded RSL calculation feature included… | column | Enumeration | .1.3.6.1.4.1.2281.3.1.1.1.6 |
| gnOduCfgTransmitLevel mandatory This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.7 |
| gnOduCfgRealTxFreqNumber mandatory Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Tx frequency value is over 4000000 t… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.8 |
| gnOduCfgRealRxFreqNumber mandatory Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Rx frequency value is over 4000000 t… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.1.1.9 |