gnAgnLogFileDeviceIDUStatus

CERAGON-MIB · .1.3.6.1.4.1.2281.2.2.2.4.1.12
MIB view Table view

Object

column mandatory OctetString 
This is the IDU status during the alarm acceptance
bit 1 MSB
bit 1  = Power status -
bit 2  = Cable open status -
bit 3  = Cable short status -
bit 4  = Modem Lock status
bit 5  = Temperature status
bit 6  = Not currently used.
bit 7  = loopback status
bit 8  = External alarm 1 status
bit 9  = External alarm 2 status
bit 10 = External alarm 3 status
bit 11 = External alarm 4 status
bit 12 = External alarm 5 status
bit 13 = External alarm 6 status
bit 14 = External alarm 7 status
bit 15 = External alarm 8 status
bit 16 = Remote connectivity status.
bit 17 = Inner communication status.

Context

MIB
CERAGON-MIB
OID
.1.3.6.1.4.1.2281.2.2.2.4.1.12
Type
column
Access
readonly
Status
mandatory
Parent
gnAgnLogFileEntry
Table
gnAgnLogFileTable
Siblings
25

Syntax

OctetString

Values & Constraints

Object Constraints
range: 3-3

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gnAgnLogFileId mandatory
This value indicates the index of an alarm logfile entry. Entry 1 is the most recent logfile event
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.1
gnAgnLogFileDeviceFanStatus mandatory
This is the Fan status of the IDU, during the alarm acceptance bit 1 = Fan1 is faulty. bit 2 = Fan 2 is faulty.
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.10
gnAgnLogFileDeviceODUStatus mandatory
This is the ODU status during the alarm acceptance bit 1 MSB bit 1 = Power Supply status bit 2 = Synthesizer lock status bit 3 = Tx level status bit 4 = ATPC status bit 5 = Rx lev…
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.11
gnAgnLogFileOduCelsiusTemp mandatory
This is the temperature of the ODU in degrees Celsius, during the alarm acceptance.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.13
gnAgnLogFileOduReceiveLevel mandatory
This is the received signal level in DBM, during the alarm acceptance
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.14
gnAgnLogFileOduSynthesizerVCOLock mandatory
This is the Synthesizer status, during the alarm acceptance bit 1 on = TX IF synthesizer fault bit 2 on = RX IF synthesizer fault bit 3 on = Xband synthesizer fault bit 4 on = His…
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.15
gnAgnLogFileOduPowerSupply mandatory
This is the ODU power supply status, during the alarm acceptance bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty.
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.16
gnAgnLogFileLineBERCur mandatory
This is the Line BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.17
gnAgnLogFileRadioBERCur mandatory
This is the Radio BER (Bit Error Rate), during the alarm acceptance. Included for future development, not currently supported.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.18
gnAgnLogFileModStatus mandatory
This is the Modulator status, during the alarm acceptance ok(2), modulatorFault(3)
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.19
gnAgnLogFileValid mandatory
This value indicates the validity of the indexed alarm logfile entry. a VALID log entry is (2) and an INVALID entry is (3).
columnEnumeration.1.3.6.1.4.1.2281.2.2.2.4.1.2
gnAgnLogFileDemodStatus mandatory
This is the Demodulator status, during the alarm acceptance . This field is for internal use internal debugging
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.20
gnAgnLogFileLastDemodDefectBlocks mandatory
This is the number of the Defected blocks (blocks that couldn't be corrected) by the FEC, during the alarm acceptance last second.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.21
gnAgnLogFileLastDemodBytesCorrected mandatory
This is the number of the bytes that were corrected by the FEC, during the alarm acceptance last second.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.22
gnAgnLogFileLastDemodBlocksCorrected mandatory
This is the number of the blocks that were corrected by the FEC , during the alarm acceptance last second.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.23
gnAgnLogFileUniqueId mandatory
Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF).
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.24
gnAgnLogFileSource mandatory
The soure drawer of the alarm.
columnEnumeration.1.3.6.1.4.1.2281.2.2.2.4.1.25
gnAgnLogFileTimeT mandatory
The time of the alarm represented by the number of seconds from 1.1.1970.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.26
gnAgnLogFileDate mandatory
This field is the date the alarm occurred, formatted as YYYY-MM-DD. YYYY represents the year, MM the month and DD -the day.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.2.2.2.4.1.3
gnAgnLogFileTime mandatory
This field is the hour the alarm occurred - format HH:MM. HH - Hour, MM - minute
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.2.2.2.4.1.4
gnAgnLogFileSeverity mandatory
This value indicates the severity of the alarm, 31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT.
columnEnumeration.1.3.6.1.4.1.2281.2.2.2.4.1.5
gnAgnLogFileText mandatory
This field describes the alarm that occurred. Max length 40 characters.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.2.2.2.4.1.6
gnAgnLogFileDeviceCelsiusTemp mandatory
This is the temperature of the IDU in degrees Celsius, during the alarm acceptance.
columnInteger32.1.3.6.1.4.1.2281.2.2.2.4.1.7
gnAgnLogFileDevicePowerSupply mandatory
This is the Power supply status of the IDU, during the alarm acceptance bit 1 on = 3.3V faulty bit 2 on = -5V faulty bit 3 on = 5V faulty. bit 4 on = +8V faulty
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.8
gnAgnLogFileInternalCommunication mandatory
This is the internal communication status of the IDU, during the alarm acceptance bit 1 = 1: between main CPU and ODU CPU. bit 2 = 1: between main CPU and MUX CPU. bit 3 = 1: betw…
columnOctetString.1.3.6.1.4.1.2281.2.2.2.4.1.9