gnAgnLogFileSeverity
CERAGON-MIB ·
.1.3.6.1.4.1.2281.2.2.2.4.1.5
Object
column
mandatory
Enumeration
This value indicates the severity of the alarm, 31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT.
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.2.2.2.4.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- gnAgnLogFileEntry
- Table
- gnAgnLogFileTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | event |
3 | warning |
7 | minor |
15 | major |
31 | critical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnAgnLogFileId mandatory This value indicates the index of an alarm logfile entry.
Entry 1 is the most recent logfile
event | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.1 |
| gnAgnLogFileDeviceFanStatus mandatory This is the Fan status of the IDU, during the alarm acceptance
bit 1 = Fan1 is faulty.
bit 2 = Fan 2 is faulty. | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.10 |
| gnAgnLogFileDeviceODUStatus mandatory This is the ODU status during the alarm acceptance
bit 1 MSB
bit 1 = Power Supply status
bit 2 = Synthesizer lock status
bit 3 = Tx level status
bit 4 = ATPC status
bit 5 = Rx lev… | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.11 |
| gnAgnLogFileDeviceIDUStatus mandatory This is the IDU status during the alarm acceptance
bit 1 MSB
bit 1 = Power status -
bit 2 = Cable open status -
bit 3 = Cable short status -
bit 4 = Modem Lock status
bit 5 =… | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.12 |
| gnAgnLogFileOduCelsiusTemp mandatory This is the temperature of the ODU in degrees Celsius,
during the alarm acceptance. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.13 |
| gnAgnLogFileOduReceiveLevel mandatory This is the received signal level in DBM, during the alarm acceptance | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.14 |
| gnAgnLogFileOduSynthesizerVCOLock mandatory This is the Synthesizer status, during the alarm acceptance
bit 1 on = TX IF synthesizer fault
bit 2 on = RX IF synthesizer fault
bit 3 on = Xband synthesizer fault
bit 4 on = His… | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.15 |
| gnAgnLogFileOduPowerSupply mandatory This is the ODU power supply status, during the alarm acceptance
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty. | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.16 |
| gnAgnLogFileLineBERCur mandatory This is the Line BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.17 |
| gnAgnLogFileRadioBERCur mandatory This is the Radio BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.18 |
| gnAgnLogFileModStatus mandatory This is the Modulator status, during the alarm acceptance
ok(2),
modulatorFault(3) | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.19 |
| gnAgnLogFileValid mandatory This value indicates the validity of the indexed alarm logfile entry.
a VALID log entry is (2) and an INVALID entry is (3). | column | Enumeration | .1.3.6.1.4.1.2281.2.2.2.4.1.2 |
| gnAgnLogFileDemodStatus mandatory This is the Demodulator status, during the alarm acceptance . This field
is for internal use
internal debugging | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.20 |
| gnAgnLogFileLastDemodDefectBlocks mandatory This is the number of the Defected blocks (blocks that couldn't be
corrected)
by the FEC, during the alarm acceptance last second. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.21 |
| gnAgnLogFileLastDemodBytesCorrected mandatory This is the number of the bytes that were corrected by the FEC,
during the alarm acceptance last second. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.22 |
| gnAgnLogFileLastDemodBlocksCorrected mandatory This is the number of the blocks that were corrected by the FEC
, during the alarm acceptance last second. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.23 |
| gnAgnLogFileUniqueId mandatory Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF). | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.24 |
| gnAgnLogFileSource mandatory The soure drawer of the alarm. | column | Enumeration | .1.3.6.1.4.1.2281.2.2.2.4.1.25 |
| gnAgnLogFileTimeT mandatory The time of the alarm represented by the number of seconds from 1.1.1970. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.26 |
| gnAgnLogFileDate mandatory This field is the date the alarm occurred, formatted as YYYY-MM-DD.
YYYY represents the year, MM the month and DD -the day. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.2.2.2.4.1.3 |
| gnAgnLogFileTime mandatory This field is the hour the alarm occurred - format HH:MM.
HH - Hour, MM - minute | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.2.2.2.4.1.4 |
| gnAgnLogFileText mandatory This field describes the alarm that occurred. Max length 40
characters. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.2.2.2.4.1.6 |
| gnAgnLogFileDeviceCelsiusTemp mandatory This is the temperature of the IDU in degrees Celsius,
during the alarm acceptance. | column | Integer32 | .1.3.6.1.4.1.2281.2.2.2.4.1.7 |
| gnAgnLogFileDevicePowerSupply mandatory This is the Power supply status of the IDU, during the alarm
acceptance
bit 1 on = 3.3V faulty
bit 2 on = -5V faulty
bit 3 on = 5V faulty.
bit 4 on = +8V faulty | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.8 |
| gnAgnLogFileInternalCommunication mandatory This is the internal communication status of the IDU, during the alarm
acceptance
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: betw… | column | OctetString | .1.3.6.1.4.1.2281.2.2.2.4.1.9 |