gnOduCfgXRfuMode
CERAGON-MIB ·
.1.3.6.1.4.1.2281.3.1.4.1.31
Object
column
mandatory
r/w
Enumeration
The RX mode of operation.
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.3.1.4.1.31- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- gnOduCfgXEntry
- Table
- gnOduCfgXTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | main |
3 | diversity |
4 | combined |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnOduCfgXId mandatory | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.1 |
| gnOduCfgXRealRxFreqNumber mandatory Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Rx frequency value is over 4000000 t… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.10 |
| gnOduCfgXMinTxFreqNumber mandatory This the Minimum TX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.11 |
| gnOduCfgXMaxTxFreqNumber mandatory This the Maximum TX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.12 |
| gnOduCfgXMaxTxLevel mandatory This is the theoretical maximum level that this ODU unit
can transmit. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.13 |
| gnOduCfgXRefRsl mandatory This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.14 |
| gnOduCfgXForceRmtMuteTx mandatory When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit) | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.15 |
| gnOduCfgXForceRmtMaxTx mandatory This parameter force the transmitter output power level of the signal
transmitted by the radio. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.16 |
| gnOduCfgXTLPerfMonThresh1 mandatory When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.17 |
| gnOduCfgXOperation mandatory This parameter allows to perform ODU operations.
(3) will SET all ODU default configurations.
(4) will implement ODU reset. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.18 |
| gnOduCfgXODUSerialNumber mandatory This is the ODU serial number - up to 20 characters | column | OctetString | .1.3.6.1.4.1.2281.3.1.4.1.19 |
| gnOduCfgXTxFreqNumLocalRemote mandatory Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.2 |
| gnOduCfgXChannelBandwidth mandatory The TX channel bandwidth, displayed in 1/100 MHz.
For example:
An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.20 |
| gnOduCfgXMinRxFreqNumber mandatory This the Minimum RX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.21 |
| gnOduCfgXMaxRxFreqNumber mandatory This the Maximum RX frequency that the ODU can receive - Used by the
management station. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.22 |
| gnOduCfgXRxFreqNumLocalRemote mandatory Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.23 |
| gnOduCfgXOduLoopSupport mandatory Inidcation for loopback support by the connected ODU. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.24 |
| gnOduCfgXOduModel mandatory . | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.25 |
| gnOduCfgXFreqPlanStandard mandatory For the NMS use. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.3.1.4.1.26 |
| gnOduCfgXFreqDevider mandatory Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000) | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.27 |
| gnOduCfgXLoopbackOption mandatory This parameter enable the user to activate an ODU loopback . | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.28 |
| gnOduCfgXxpicClockMode mandatory This is the status of the xpic clock mode. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.29 |
| gnOduCfgXRLPerfMonThresh1 mandatory When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.3 |
| gnOduCfgXUnfadedReferenceRsl mandatory This is used for the unfaded RSL calculation feature included in
the element manager. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.30 |
| gnOduCfgXRslRouteToConnector mandatory Choose the receive level signal for the RSL connector. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.32 |
| gnOduCfgXDelayCalibrationOperation mandatory This parameter enables launching a delay calibration parameters calculation. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.33 |
| gnOduCfgXDelayCalibrationValue mandatory This parameter indicates the delay calibration result and delay calibration override value.
values are between -130 to 130. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.34 |
| gnOduCfgXDelayCalibrationWgType mandatory Delay Calibration WG Type For the NMS use. | column | OctetString | .1.3.6.1.4.1.2281.3.1.4.1.35 |
| gnOduCfgXOduLog mandatory This parameter enable the user to activate ODU log. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.36 |
| gnOduCfgXOduLogPeriod mandatory This parameter enable the user to chose the log peroid (in sec). | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.37 |
| gnOduCfgXXpiPerfMonThresh mandatory When the Received XPI beneath this threshold a
performance monitoring XPI counter increments (future develope). | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.38 |
| gnOduCfgXRLPerfMonThresh2 mandatory When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.4 |
| gnOduCfgXATPCStatus mandatory This parameter indicates if the ATPC option is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.5 |
| gnOduCfgXMUTEStatus mandatory This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit) | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.6 |
| gnOduCfgXAntennaType mandatory This parameter indicates the size of the antenna used
in the ODU. This attribute will not auto-detect the antenna size.
It is used for the unfaded RSL calculation feature included… | column | Enumeration | .1.3.6.1.4.1.2281.3.1.4.1.7 |
| gnOduCfgXTransmitLevel mandatory This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM. | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.8 |
| gnOduCfgXRealTxFreqNumber mandatory Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Tx frequency value is over 4000000 t… | column | Integer32 | .1.3.6.1.4.1.2281.3.1.4.1.9 |