gnGenCfgSlipModemConnection

CERAGON-MIB · .1.3.6.1.4.1.2281.2.1.8.1.10
MIB view Table view

Object

column mandatory r/w RFC1213-MIBDisplayString 
The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567).

Context

MIB
CERAGON-MIB
OID
.1.3.6.1.4.1.2281.2.1.8.1.10
Type
column
Access
readwrite
Status
mandatory
Parent
gnGenCfgDeviceEntry
Table
gnGenCfgDeviceTable
Siblings
26

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gnGenCfgDeviceId mandatory
This value indicates the device table entry (local or Remote).
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.1
gnGenCfgSlipSpeed mandatory
The SERIAL interface baud rate.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.11
gnGenCfgAlarmSeverity mandatory
This field is used only by the element management application Every Trap severity 4 bits. 15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options. The first 4 bits ODU Power supp…
columnOctetString.1.3.6.1.4.1.2281.2.1.8.1.12
gnGenCfgODUSerialNumber mandatory
This is the ODU serial number - up to 20 characters
columnOctetString.1.3.6.1.4.1.2281.2.1.8.1.13
gnGenCfgIDUSerialNumber mandatory
This is the IDU serial number - up to 20 characters
columnOctetString.1.3.6.1.4.1.2281.2.1.8.1.14
gnGenCfgAlarmText mandatory
The private trap text, describing the last generated trap text.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.2281.2.1.8.1.15
gnGenCfgTrapSeverity mandatory
The current Trap severity, describing the last generated trap severity
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.16
gnGenCfgProductType mandatory
The product type.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.17
gnGenCfgLeftMediumConnector mandatory
For ACCESS hardware, this indicates the first (left) interface connector.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.18
gnGenCfgMiddleMediumConnector mandatory
For ACCESS hardware, this indicates the second (right)interface connector.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.19
gnGenCfgDeviceResetPerfMon mandatory
Reset performance monitoring.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.2
gnGenCfgPrimaryClockSource mandatory
The primary clock source, configurable for ACCESS radios only.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.20
gnGenCfgSecondaryClockSource mandatory
The secondary clock source, configurable for ACCESS radios only.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.21
gnGenCfgTrapOption mandatory
This item defines various trap options (0-31): 0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER) 1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER) 2 - SNSN, DNLR (DO …
columnInteger32.1.3.6.1.4.1.2281.2.1.8.1.22
gnGenCfgCLLI mandatory
Common Language Location Identifier (maximum length: 30)
columnOctetString.1.3.6.1.4.1.2281.2.1.8.1.23
gnGenCfgHeartbeatPeriod mandatory
This item defines the number of minutes between each trap
columnInteger32.1.3.6.1.4.1.2281.2.1.8.1.24
gnGenCfgGetRemoteData mandatory
.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.25
gnGenCfgClearLoopTimeout mandatory
This item defines the clear loopbacks timeout in minutes. possible values: 0..1440. 0 means disable.
columnInteger32.1.3.6.1.4.1.2281.2.1.8.1.26
gnGenCfgSubProductType mandatory
lsb bit: 1 if 1500i or 1528i 0 otherwise.
columnInteger32.1.3.6.1.4.1.2281.2.1.8.1.27
gnGenCfgDeviceOperation mandatory
This parameter allows the NMS to perform operations. (3) will implement software RESET (4) will SET all factory default configurations, including IP address! (5) will CLEAR IDU so…
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.3
gnGenCfgActivateLoopback mandatory
This parameter controls the loop back diagnostics operations. For remote units, only SPI, MUX and MDM loopbacks are allowed.
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.4
gnGenCfgF1DataChanConnector mandatory
This is the physical interface of the F1 line data channel (USER CHANNEL connection).
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.5
gnGenCfgWaySideConnector mandatory
This is the physical interface of the radio E1 way side channel (WAYSIDE CHANNEL connection).
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.6
gnGenCfgActivateChanLoopback mandatory
This parameter controls the USER CHANNEL and WAYSIDE channel loopback diagnostic operations. (3) will activate the 64k data channel loopback (USER CHANNEL) (4) will activate the W…
columnEnumeration.1.3.6.1.4.1.2281.2.1.8.1.7
gnGenCfgInterLenLocalOnly mandatory
This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! . WRITE will change the local side only.
columnInteger32.1.3.6.1.4.1.2281.2.1.8.1.8
gnGenCfgSlipIp mandatory
This is the SERIAL interface IP address. Included for future development, not currently supported.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.2281.2.1.8.1.9