ADTRAN-GEN-Y1731-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
166

adGenY1731MegTable

table
.1.3.6.1.4.1.664.5.75.2.1.2.4 · 1 row entry · 8 columns
Open in standard view 
The Y.1731 MEG table.
adGenY1731MegEntry entry .1.3.6.1.4.1.664.5.75.2.1.2.4.1
An entry in the Y.1731 MEG table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName
Column Syntax OID
adGenY1731MegLevel
MEG level for the MEG.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.1
adGenY1731MegNameFormat
char-string - This is an IETF RFC 2579 DisplayString, with the
exception that the character codes 0-31 (decimal) are not used.

icc-umc - this consists of two subfields:
(1) The ITU Carrier Code (ICC) fol…
Enumeration
Enumerated Values:
2charString
32iccUmc
256cfm
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.2
adGenY1731MegNameLengthAndName
If adGenY1731MegNameFormat is char-string or icc-umc -
The First octet represents the total length in octets of the MEG Name.
Octets 2-46 represent the MEG Name associated with the MEG.

If adGenY1731Me…
OctetString
Constraints:
range: 2-46
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.3
adGenY1731MegRowStatus
This OID is used to create and delete the MEG. The only supported
settings are createAndGo, createAndWait, and destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.4
adGenY1731MegServiceTypeValueList
Octet string which defines the service type and value that maintenance
points in the MEG reside and operate on.

Expected format: First octet represents the overall format and order of
service types. Subs…
OctetStringr/w .1.3.6.1.4.1.664.5.75.2.1.2.4.1.5
adGenY1731MegCcmInterval
Interval between CCM transmissions to be used by all MEPs in the MEG.
Default value is 1-second.
Enumerationr/w
Enumerated Values:
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.6
adGenY1731MegLocalMepConfigTableLastCreateError
The reason for the last error that occured while attempting to create
an entry in the MEG's local MEP Config Table
(adGenY1731LocalMepConfigTable).
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.7
adGenY1731MegDisplayName
Represents the MEG Name associated with the MEG.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.2.4.1.8

adGenY1731MegMepListTable

table
.1.3.6.1.4.1.664.5.75.2.1.2.5.2 · 1 row entry · 2 columns
Open in standard view 
The list of all MEPs in the MEG.  For a device to create a local MEP it
will need to create an entry in the adGenY1731LocalMepConfigTable. 
          
Once a local MEP is created, all other entries in the 
adGenY1731MegMepListTable are automatically considered remote MEPs of 
the local MEP and their information is used to populate 
the adGenY1731LocalMepRmepDbTable.
          
The MEG MEP List should be the same across all devices in the MEG
and contain the exact same list of adGenY1731MegMepListIdentifiers.
          
On a given device, a MEPID in the MEG MEP list can transition from 
having no association to a local or remote MEP to any of the following
(1) becoming a local MEP, (2) becoming a remote MEP of a local MEP, or
(3) becoming both a local MEP and a remote MEP of a local MEP.  The 
third case is possible if two local MEPs in the same MEG are created 
on the same device.
adGenY1731MegMepListEntry entry .1.3.6.1.4.1.664.5.75.2.1.2.5.2.1
An entry in the Y.1731 MEG MEP list table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731MegMepListIdentifier
Column Syntax OID
adGenY1731MegMepListIdentifier
Integer that is unique among all the MEPs in the same MEG. Other
definition is: a small integer, unique over a given Maintenance Entity
Group, identifying a specific MEG End Point.

MEP Identifier is als…
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.2.5.2.1.1
adGenY1731MegMepListRowStatus
This OID is used to create/delete the MEG MEP list entry. The only
supported settings are createAndGo, createAndWait, and destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.2.5.2.1.2

adGenY1731LocalMepConfigTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.1.2 · 1 row entry · 9 columns
Open in standard view 
The Y.1731 local MEP table.  A local MEP is one that resides on an 
interface of the system.
adGenY1731LocalMepConfigEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1
An entry in the Y.1731 local MEP table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731LocalMepIdentifier
Integer that is unique among all the MEPs in the same MEG. Other
definition is: a small integer, unique over a given Maintenance Entity
Group, identifying a specific MEG End Point.

MEP Identifier is al…
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.1
adGenY1731LocalMepRowStatus
This OID is used to create/delete the MEP. The only supported settings
are createAndGo, createAndWait, and destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.2
adGenY1731LocalMepStatus
Operational status of the MEP. The minimum attributes that need to be
set before a MEP can transition to running are: ifIndex, direction,
and admin state.
Enumeration
Enumerated Values:
1running
2notRunning
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.3
adGenY1731LocalMepStatusString
Operational status string of the MEP. If the MEP is expected to be
active but is not able to be due to a provisioning issue or conflict,
this string will explain the reason.
OctetString .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.4
adGenY1731LocalMepIfIndex
This object is the interface index of the interface either a bridge
port, or an aggregated IEEE 802.1 link within a bridge port, to which
the MEP is attached. A value of 0 indicates no IfIndex
has been assigned.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.5
adGenY1731LocalMepDirection
The direction in which the MEP faces on the Bridge port.
Enumerationr/w
Enumerated Values:
0notSet
1down
2up
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.6
adGenY1731LocalMepAdminState
The administrative state of the MEP.

Enable indicates that the MEP is to function normally, and disable that
it is to cease functioning.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.7
adGenY1731LocalMepVlanPriority
The priority value for messages transmitted by the MEP. Default value
is the highest priority value for the service which is assumed to be 7.
The management entity can obtain the default value for this variable
from t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.8
adGenY1731LocalMepCcmEnabled
If set to true, the MEP will generate CCM messages.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.75.2.1.3.1.2.1.9

adGenY1731LocalMepRmepDbTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.2.2 · 1 row entry · 12 columns
Open in standard view 
The RMEP database table for a given local MEP.  Maintains information 
and status for each RMEP of a local MEP.
adGenY1731LocalMepRmepDbEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1
An entry in the a local MEP's RMEP database table. An RMEP
associated with a specific local MEP
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731RemoteMepIdentifier
Column Syntax OID
adGenY1731RemoteMepIdentifier
Integer that is unique among all the MEPs in the same MEG. Other
definition is: a small integer, unique over a given Maintenance Entity
Group, identifying a specific MEG End Point.

MEP Identifier is also…
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.1
adGenY1731RemoteMepStatus
Status of the RMEP.
Status of idle indicates the local MEP associated with this RMEP entry
is not in the active state.

Status of okay indicates the local MEP is actively receiving CCMs from
the RMEP a…
Enumeration
Enumerated Values:
0idle
1okay
2failed
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.2
adGenY1731RemoteMepFailedOkTime
The time (SysUpTime) at which the RMEP state machine last entered
either the idle, okay, or failed state. The value is the time since
the device started up and is represented using TimeStamp syntax.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.3
adGenY1731RemoteMepMacAddress
The MAC address of the remote MEP.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.4
adGenY1731RemoteMepLastCcmSequenceNumber
Sequence number in last CCM received from the remote MEP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.5
adGenY1731RemoteMepRdi
State of the RDI bit in the last received CCM (true for RDI=1), or
false if none has been received.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.6
adGenY1731RemoteMepPortStatus
An enumerated value of the Port Status TLV received in the last CCM
from the remote MEP.

The default value psNoPortStatusTlv is returned if no CCM has been
received or if no Port Status TLV was received …
Enumeration
Enumerated Values:
0psNoPortStatusTlv
1psBlocked
2psUp
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.7
adGenY1731RemoteMepInterfaceStatus
An enumerated value of the Interface status TLV received in the last
CCM from the remote MEP.

The the default value isNoInterfaceStatus TLV is returned if either no
CCM has been received or if no interfac…
Enumeration
Enumerated Values:
0isNoInterfaceStatusTLV
1isUp
2isDown
3isTesting
4isUnknown
5isDormant
6isNotPresent
7isLowerLayerDown
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.8
adGenY1731RemoteMepChassisIdSubtype
Specifies the format of the Chassis ID received in the last CCM.
If the Chassis ID field was not included in the Sender ID TLV
received, the value nonePresent(0) will be returned.
Enumeration
Enumerated Values:
0nonePresent
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7local
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.9
adGenY1731RemoteMepChassisId
Chassis ID received in the last CCM format of which is determined by
the value of adGenY1731RemoteMepChassisIdSubtype.
LLDP-MIBLldpChassisId
Textual Convention: LLDP-MIBLldpChassisId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.10
adGenY1731RemoteMepManAddressDomain
The TDomain that identifies the type and format of
the related adGenY1731RemoteMepManAddress object, used to access
the SNMP agent of the system transmitting the CCM. The value is
derived from the Sender ID TLV in the …
SNMPv2-TCTDomain
Textual Convention: SNMPv2-TCTDomain ObjectIdentifier
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.11
adGenY1731RemoteMepManAddress
The TAddress that can be used to access the SNMP agent of the system
transmitting the CCM. This is received in the CCM Sender ID TLV from
that system.

If the related object adGenY1731RemoteMepManAddress…
SNMPv2-TCTAddress
Textual Convention: SNMPv2-TCTAddress OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.2.2.1.12

adGenY1731LocalMepLbmTransmitTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.3.1 · 1 row entry · 16 columns
Open in standard view 
The Y.1731 Local MEP Loopback Transmit table.  A Local MEP is one that
resides on an interface of the system. This table will enable the user
to configure a Local MEP in preparation for starting a Loopback
session.
adGenY1731LocalMepLbmTransmitEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1
An entry in the Y.1731 Local MEP Loopback Transmit table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731LocalMepLbmStatus
A Boolean flag where true means the MEP is actively sending LBM messages
and false means that no LBMs are being transmitted.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.1
adGenY1731LocalMepLbmConfigStatus
True means the MEP is ready for configuring LBM and a false means the MEP
is under LBM configuration. This flag is used to prevent simultaneous
configuration by more than one user. If one minute has passed since the …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.2
adGenY1731LocalMepLbmDestMacAddress
The Target MAC Address Field to be transmitted. This is a unicast
destination MAC address.

This address will be used if the value of the column
adGenY1731LocalMepTransmitLbmDestMepId is 'false'.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.3
adGenY1731LocalMepLbmDestMepId
The MEG End Point Identifier of another MEP in the same MEG to which
the LBM is to be sent. This address will be used if the value of the
column adGenY1731LocalMepTransmitLbmDestIsMepId is 'true'.
Integer32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.4
adGenY1731LocalMepLbmDestIsMepId
True indicates that MEPID of the target MEP is used for Loopback
transmission. False indicates that unicast destination MAC address of
the target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.5
adGenY1731LocalMepLbmMessageCount
The number of Loopback messages to be transmitted.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.6
adGenY1731LocalMepLbmActive
Start or stop LBM transmission. By writing true, start LBM transmisson.
By writing false, stop LBM transmission
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.7
adGenY1731LocalMepLbmDataTlv
An arbitrary amount of data to be included in the Data TLV, if the Data
TLV is selected to be sent.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.8
adGenY1731LocalMepLbmVlanPriority
The 3 bit priority value to be used in the VLAN tag, if present, in the
transmitted frame.

The default value is CCM priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.9
adGenY1731LocalMepLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.

For more information about VLAN Drop Enable, please check
IEEE 802.1ad.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.10
adGenY1731LocalMepLbmErrorStatus
MEP Loopback error status.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.11
adGenY1731LocalMepLbmTimeout
MEP Loopback Timeout in milliseconds.
Unsigned32r/w
Constraints:
range: 100-5000
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.12
adGenY1731LocalMepLbmInterframeDelay
MEP Loopback Interframe Delay in milliseconds.
Unsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.13
adGenY1731LocalMepLbmNextTransId
Next transaction identifier to be sent in a Loopback message. This
transaction identifier can be zero because it wraps around.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.14
adGenY1731LocalMepLbmSize
Size of the LBM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.

The supported values are:
0 to indicate Data TLV should not be included in LBM sent.
64 to 200…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.15
adGenY1731LocalMepValidateData
A Boolean flag where true means the data sent in LBM message has to be
validated with the LBR. False indicates no validation is required.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.16

adGenY1731LocalMepLbmResultTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.3.2 · 1 row entry · 8 columns
Open in standard view 
The Y.1731 Local MEP Loopback Result table.  A Local MEP is one that resides on an 
interface of the system. This table can be used to query the results and counters  
related to LBM
adGenY1731LocalMepLbmResultEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1
An entry in the Y.1731 Local MEP Loopback Result table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731LocalMepLbrResultOk
Indicates the result of the operation:

- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.1
adGenY1731LocalMepLbrResponseTimeMin
Minimum LBR round-trip time (in milliseconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.2
adGenY1731LocalMepLbrResponseTimeMax
Maximum LBR round-trip time (in milliseconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.3
adGenY1731LocalMepLbrResponseTimeAvg
Average LBR round-trip time (in milliseconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.4
adGenY1731LocalMepLbrIn
Total number of valid, Loopback Replies received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.5
adGenY1731LocalMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies
received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.6
adGenY1731LocalMepLbrBadMsdu
The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.7
adGenY1731LocalMepLbmOut
The total number of LBMs transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.2.1.8

adGenY1731LocalMepLbmResponderTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.3.3 · 1 row entry · 2 columns
Open in standard view 
The Y.1731 Local MEP Loopback Responder table.  A Local MEP is one that resides on an 
interface of the system. This table can be used to query the counters  
related to LBR
adGenY1731LocalMepLbmResponderEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.3.3.1
An entry in the Y.1731 Local MEP Loopback Responder table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adgenY1731LocalMepLbrOut
Total number of Loopback Replies transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.3.1.1
adGenY1731LocalMepLbmIn
Total number of valid, Loopback Messages received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.3.3.1.2

adGenY1731DmmSessionTransmitTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.4.2 · 1 row entry · 14 columns
Open in standard view 
The two-way frame-delay (DMM) session table for a given local MEP.
A local MEP's DMM sessions can be created, edited, and deleted using
this table.  A local MEP can target a remote MEP to run two-way frame
delay measurements between the two MEPs in the MEG.  
          
The target can be specified by either using a MAC address of the target
MEP or the MEPID of the target MEP.  For the DMM session to go active, 
the local MEP must be successfully receiving CCMs from the remote MEP
in order to specify the RMEPID as the target.
adGenY1731DmmSessionTransmitEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1
A two-way frame-delay (DMM) performance monitoring session of a
local MEP. A DMM PM session is unique based on target identifier
and VLAN priority. The target identifier is either a MAC address
or RMEPID. Inclusion…
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731DmmSessionTargetRmepIdOrMacAddress adGenY1731DmmSessionTarget adGenY1731DmmSessionVlanPriority
Column Syntax OID
adGenY1731DmmSessionTargetRmepIdOrMacAddress
Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID, the local MEP will not be
able to initiate the DMM session until a CCM has been received from the
RMEP
Enumeration
Enumerated Values:
1rmepId
2macAddress
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.1
adGenY1731DmmSessionTarget
Octet string defining the target for the DMM session.
If adGenY1731DmmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a MEPID between the
range 1-8191. Otherwi…
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.2
adGenY1731DmmSessionVlanPriority
VLAN Priority that will be used in all DMM frames sent by this
DMM transmit session.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.3
adGenY1731DmmSessionTargetRemoteMepIdentifier
Target MEPID for this DMM session
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.4
adGenY1731DmmSessionTargetMacAddress
Target MAC address for this DMM session
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.5
adGenY1731DmmSessionRowStatus
This OID is used to create/delete a transmit DMM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.6
adGenY1731DmmSessionAdminState
The administrative state of the DMM transmit session.

True indicates that the DMM session is to function normally and
actively transmit DMMs towards the specified target, and false that
it is to cease fun…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.7
adGenY1731DmmSessionStatus
Operational status of the DMM transmit session. The minimum
attributes that need to be set before a MEP can transmit DMMs towards
the target are: Target MEPID or MAC Address and admin state. If a
MEPID is used to sp…
Enumeration
Enumerated Values:
1running
2notRunning
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.8
adGenY1731DmmSessionStatusString
Operational status string of the DMM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will explain the reason.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.9
adGenY1731DmmSessionInterframeDelay
Amount of time in milliseconds between DMM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms.
Integer32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.10
adGenY1731DmmSessionMeasurementInterval
Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interval are stored in the averaged data
file.…
Integer32r/w
Constraints:
range: 60-900
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.11
adGenY1731DmmSessionSize
Size of the DMM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.

The supported values are:
0 to indicate Data TLV should not be included in DMM sent.
64 to 200…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.12
adGenY1731DmmSessionData
Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.13
adGenY1731DmmSessionBulkDataExportFileTypes
Determines which, if any, files are generated by this DMM transmit
session. The files are used to store two-way frame-delay statistics.
The average setting will enable storage of statistics generated by
each measureme…
Enumerationr/w
Enumerated Values:
1none
2average
3raw
4averageAndRaw
 .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.14

adGenY1731LmmSessionTransmitTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.5.2 · 1 row entry · 14 columns
Open in standard view 
The single-ended frame-loss (LMM) session table for a given local MEP.
A local MEP's LMM sessions can be created, edited, and deleted using
this table.  A local MEP can target a remote MEP to run single-ended 
frame-loss measurements between the two MEPs in the MEG.  
          
The target can be specified by either using a MAC address of the target
MEP or the MEPID of the target MEP.  For the LMM session to go active, 
the local MEP must be successfully receiving CCMs from the remote MEP
in order to specify the RMEPID as the target.
adGenY1731LmmSessionTransmitEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1
A single-ended frame-loss (LMM) performance monitoring session of a
local MEP. A LMM PM session is unique based on target identifier
and VLAN priority. The target identifier is either a MAC address
or RMEPID. Inclu…
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731LmmSessionTargetRmepIdOrMacAddress adGenY1731LmmSessionTarget adGenY1731LmmSessionVlanPriority
Column Syntax OID
adGenY1731LmmSessionTargetRmepIdOrMacAddress
Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID the local MEP will not be
able to initiate the LMM session until a CCM has been received from the
RMEP
Enumeration
Enumerated Values:
1rmepId
2macAddress
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.1
adGenY1731LmmSessionTarget
Octet string defining the target for the LMM session.
If adGenY1731LmmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a MEPID between the
range 1-8191. Otherwi…
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.2
adGenY1731LmmSessionVlanPriority
VLAN Priority that will be used in all LMM frames sent by this
LMM transmit session.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.3
adGenY1731LmmSessionTargetRemoteMepIdentifier
Target MEPID for this LMM session
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.4
adGenY1731LmmSessionTargetMacAddress
Target MAC address for this LMM session
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.5
adGenY1731LmmSessionRowStatus
This OID is used to create/delete a transmit LMM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.6
adGenY1731LmmSessionAdminState
The administrative state of the LMM transmit session.

True indicates that the LMM session is to function normally and
actively transmit LMMs towards the specified target, and false that
it is to cease fun…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.7
adGenY1731LmmSessionStatus
Operational status of the LMM transmit session. The minimum
attributes that need to be set before a MEP can transmit LMMs towards
the target are: Target MEPID or MAC Address and admin state. If a
MEPID is used to sp…
Enumeration
Enumerated Values:
1running
2notRunning
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.8
adGenY1731LmmSessionStatusString
Operational status string of the LMM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will explain the reason.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.9
adGenY1731LmmSessionInterframeDelay
Amount of time in milliseconds between LMM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms.
Integer32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.10
adGenY1731LmmSessionMeasurementInterval
Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interval are stored in the averaged data
file.…
Integer32r/w
Constraints:
range: 60-900
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.11
adGenY1731LmmSessionSize
Size of the LMM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.

The supported values are:
0 to indicate Data TLV should not be included in LMM sent.
64 to 200…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.12
adGenY1731LmmSessionData
Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.13
adGenY1731LmmSessionBulkDataExportFileTypes
Determines which, if any, files are generated by this LMM transmit
session. The files are used to store single-ended frame-loss
statistics. The average setting will enable storage of statistics
generated by each mea…
Enumerationr/w
Enumerated Values:
1none
2average
3raw
4averageAndRaw
 .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.14

adGenY1731LocalMepLtmTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.6.1 · 1 row entry · 18 columns
Open in standard view 
The Y.1731 Local MEP Linktrace table.  A Local MEP is one that resides 
on an interface of the system. This table will enable the user to 
configure in preparation for starting a Linktrace session.
adGenY1731LocalMepLtmEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1
An entry in the Y.1731 Local MEP Linktrace table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731LocalMepLtmNextTransactionId
Next transaction identifier to be sent in a Linktrace message. This
transaction identifier value can be zero because it wraps around.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.1
adGenY1731LocalMepUnexpLtrIn
The total number of unexpected LTRs received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.2
adGenY1731LocalMepTransmitLtmStatus
A Boolean flag set to true by the bridge port to indicate that another
LTM may be transmitted. Reset to false by the MEP Linktrace Initiator
State Machine.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.3
adGenY1731LocalMepTransmitLtmFlags
The flags field for LTMs transmitted by the MEP.
Bitsr/w
Enumerated Values:
0useFDBonly
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.4
adGenY1731LocalMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast destination
MAC address. This address will be used if the value of the column
adGenY1731LocalMepTransmitLtmTargetIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.5
adGenY1731LocalMepTransmitLtmTargetMepId
An indication of the Target MAC Address Field to be transmitted. The
MAC address to be used will be retrieved from the Local MEP's Remote
MEP database by using the MEPID specified to perform the look-up. This
addres…
Integer32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.6
adGenY1731LocalMepTransmitLtmTargetIsMepId
True indicates that MEPID of the target MEP is used for Linktrace
transmission. False indicates that unicast destination MAC address of
the target MEP is used for Linktrace transmission.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.7
adGenY1731LocalMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64. The TTL
field indicates the number of hops remaining to the LTM.
Decremented by 1 by each Linktrace Responder that handles the LTM.
The value returned in th…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.8
adGenY1731LocalMepTransmitLtmResult
Indicates the result of the operation:

true The Linktrace Message will be (or has been) sent.
false The Linktrace Message will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.9
adGenY1731LocalMepTransmitLtmTransactionId
The LTM Transaction Identifier (adGenY1731LocalMepLtmNextTransactionId)
of the LTM sent. The value returned is undefined if
adGenY1731LocalMepTransmitLtmResult is false.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.10
adGenY1731LocalMepTransmitLtmEgressIdentifier
Identifies the MEP Linktrace Initiator that is originating, or the
Linktrace Responder that is forwarding, this LTM. The low-order six
octets contain a 48-bit IEEE MAC address unique to the system in which
the MEP Lin…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.11
adGenY1731LocalMepTransmitLtmStatusString
Linktrace error status contains a string indicating the reason they
the Lintkrace transmission attempt failed.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.12
adGenY1731LocalMepTransmitLtmConfigStatus
True means the MEP is ready for configuring LTM and a false means the MEP
is under LTM configuration. This flag is used to prevent simultaneous
configuration by more than one user. If one minute has passed since the …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.13
adGenY1731LocalMepLtmActive
Start or stop LTM transmission. By writing true, start LTM transmisson.
By writing false, stop LTM transmission
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.14
adGenY1731LocalMepLtmTotalOut
The total number of LTMs transmitted by the Local MEP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.15
adGenY1731LocalMepLtrTotalIn
The total number of LTRs received by the Local MEP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.16
adGenY1731LocalMepLtrTotalInvalidIn
The total number of invalid LTRs received by the Local MEP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.17
adGenY1731LocalMepLtrTotalValidIn
The total number of valid LTRs received by the Local MEP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.1.1.18

adGenY1731LocalMepLtSessionTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.6.2 · 1 row entry · 6 columns
Open in standard view 
The Y.1731 Local MEP Linktrace session table.  This table contains a list
of Linktrace sessions and the counters associated with each session.
adGenY1731LocalMepLtSessionEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1
An entry in the Y.1731 Local MEP Linktrace session table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731LocalMepLtmTransactionId
Column Syntax OID
adGenY1731LocalMepLtmTransactionId
Transaction identifier value in LTM transmitted for this Linktrace
session.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.1
adGenY1731LocalMepLtmOut
The number of LTM transmitted for this Linktrace session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.2
adGenY1731LocalMepLtrIn
The number of LTRs received for this Linktrace session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.3
adGenY1731LocalMepLtrInvalidIn
The number of LTRs received and discarded for this Linktrace session
due to invalid formatting.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.4
adGenY1731LocalMepLtrValidIn
The number of LTRs received and processed as valid for this Linktrace
session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.5
adGenY1731LocalMepLtTimeRemaining
Each Linktrace sequence will run for a fixed period of time. This
counter indicates how much time is remaining. When the counter is 0,
there are results in the Linktrace cache. If this object does not exist
for a giv…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.2.1.6

adGenY1731LocalMepLtrTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.6.3 · 1 row entry · 21 columns
Open in standard view 
The Y.1731 Local MEP Linktrace reply table.  This table contains a list
of Linktrace replies received by a specific MEP in response to a 
Linktrace message.
adGenY1731LocalMepLtrEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1
An entry in the Y.1731 Local MEP Linktrace reply table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731LocalMepLtrTransactionId adGenY1731LocalMepLtrReceiveOrder
Column Syntax OID
adGenY1731LocalMepLtrTransactionId
Transaction identifier returned by a previous transmit Linktrace
message command, indicating which LTM's response is going to be
returned.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.1
adGenY1731LocalMepLtrReceiveOrder
An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. adGenY1731LocalMepLtrReceiveOrder
are assigned sequentially from 1, in the order that the Linktrace
Initiator received …
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.2
adGenY1731LocalMepLtrTtl
TTL field value for a returned LTR.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.3
adGenY1731LocalMepLtrForwarded
Indicates if a LTM was forwarded by the responding MP, as returned in
the 'FwdYes' flag of the flags field.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.4
adGenY1731LocalMepLtrTerminalMep
A boolean value stating whether the forwarded LTM reached a MEP within
the MEG, as returned in the Terminal MEP flag of the Flags field.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.5
adGenY1731LocalMepLtrLastEgressIdentifier
An octet field holding the Last Egress Identifier returned in the LTR
Egress Identifier TLV of the LTR. The Last Egress Identifier identifies
the MEP Linktrace Initiator that originated, or the Linktrace Responder
that …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.6
adGenY1731LocalMepLtrNextEgressIdentifier
An octet field holding the Next Egress Identifier returned in the LTR
Egress Identifier TLV of the LTR. The Next Egress Identifier
Identifies the Linktrace Responder that transmitted this LTR, and can
forward the LTM…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.7
adGenY1731LocalMepLtrRelay
Value returned in the Relay Action field.
Enumeration
Enumerated Values:
1rlyHit
2rlyFdb
3rlyMpdb
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.8
adGenY1731LocalMepLtrChassisIdSubtype
This object specifies the format of the Chassis ID returned in the
Sender ID TLV of the LTR, if any.
Enumeration
Enumerated Values:
0nonePresent
1chassisComponent
2interfaceAlias
3portComponent
4macAddress
5networkAddress
6interfaceName
7local
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.9
adGenY1731LocalMepLtrChassisId
The Chassis ID returned in the Sender ID TLV of the LTR, if any. The
format of this object is determined by the value of the
adGenY1731LocalMepLtrChassisIdSubtype object.
LLDP-MIBLldpChassisId
Textual Convention: LLDP-MIBLldpChassisId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.10
adGenY1731LocalMepLtrManAddressDomain
The TDomain that identifies the type and format of the related
adGenY1731LocalMepLtrManAddress object, used to access the SNMP agent
of the system transmitting the LTR. Received in the LTR Sender ID TLV
from that syst…
SNMPv2-TCTDomain
Textual Convention: SNMPv2-TCTDomain ObjectIdentifier
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.11
adGenY1731LocalMepLtrManAddress
The TAddress that can be used to access the SNMP agent of the system
transmitting the CCM, received in the CCM Sender ID TLV from that
system.

If the related object adGenY1731LocalMepLtrManAddressDomain …
SNMPv2-TCTAddress
Textual Convention: SNMPv2-TCTAddress OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.12
adGenY1731LocalMepLtrIngress
The value returned in the Ingress Action Field of the LTM. The value
ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM.
Enumeration
Enumerated Values:
0ingNoTlv
1ingOk
2ingDown
3ingBlocked
4ingVid
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.13
adGenY1731LocalMepLtrIngressMac
MAC address returned in the ingress MAC address field. If the
adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0),
then the contents of this object are meaningless.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.14
adGenY1731LocalMepLtrIngressPortIdSubtype
Format of the Ingress Port ID.

If the adGenY1731LocalMepLtrIngress object contains the value
ingNoTlv(0), then the contents of this object are meaningless.
LLDP-MIBLldpPortIdSubtype
Textual Convention: LLDP-MIBLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.15
adGenY1731LocalMepLtrIngressPortId
Ingress Port ID.

The format of this object is determined by the value of the
adGenY1731LocalMepLtrIngressPortIdSubtype object. If the
adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0)…
LLDP-MIBLldpPortId
Textual Convention: LLDP-MIBLldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.16
adGenY1731LocalMepLtrEgress
The value returned in the Egress Action Field of the LTR. The value
egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTR.
Enumeration
Enumerated Values:
0egrNoTlv
1egrOK
2egrDown
3egrBlocked
4egrVid
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.17
adGenY1731LocalMepLtrEgressMac
MAC address returned in the egress MAC address field.

If the adGenY1731LocalMepLtrIngress object contains the value
egrNoTlv(0), then the contents of this object are meaningless.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.18
adGenY1731LocalMepLtrEgressPortIdSubtype
Format of the egress Port ID.

If the adGenY1731LocalMepLtrEgress object contains the value
egrNoTlv(0), then the contents of this object are meaningless.
LLDP-MIBLldpPortIdSubtype
Textual Convention: LLDP-MIBLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.19
adGenY1731LocalMepLtrEgressPortId
Egress Port ID.

The format of this object is determined by the value of the
adGenY1731LocalMepLtrEgressPortIdSubtype object. If the
adGenY1731LocalMepLtrEgress object contains the value egrNoTlv(0),
…
LLDP-MIBLldpPortId
Textual Convention: LLDP-MIBLldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.20
adGenY1731LocalMepLtrOrganizationSpecificTlv
All Organization specific TLVs returned in the LTR, if any. Includes
all octets including and following the TLV Length field of each TLV,
concatenated together.
OctetString
Constraints:
range: 0-0
range: 4-1500
 .1.3.6.1.4.1.664.5.75.2.1.3.6.3.1.21

adGenY1731LocalMepLtmResponderTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.6.4 · 1 row entry · 5 columns
Open in standard view 
The Y.1731 Local MEP Linktrace Responder table.  This table contains
the counters associated with each Local MEP's Linktrace Responder.
adGenY1731LocalMepLtmResponderEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1
An entry in the Y.1731 Local MEP Linktrace Responder table.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731LocalMepLtmIn
The total number of valid LTMs received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.1
adGenY1731LocalMepLtmDiscardedInvalidFormat
The total number LTMs discarded due to invalid format.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.2
adGenY1731LocalMepLtmDiscardedTtl
The total number of LTMs discarded due to invalid Ttl.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.3
adGenY1731LocalMepLtmDiscardedTargetMac
The total number of LTMs discarded due to invalid target MAC address.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.4
adGenY1731LocalMepLtrOut
The total number of LTRs transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.75.2.1.3.6.4.1.5

adGenY1731OneDmSessionTransmitTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.7.2 · 1 row entry · 12 columns
Open in standard view 
The one-way frame-delay (ETH-1DM) session table for a given local MEP.
A local MEP's 1DM sessions can be created, edited, and deleted using
this table.  A local MEP can target a remote MEP to run one-way frame
delay measurements between the local MEP and another remote MEP in the
MEG.
          
The target can be specified by either using a MAC address of the target
MEP or the MEPID of the target MEP.  For the 1DM session to go active, 
the local MEP must be successfully receiving CCMs from the remote MEP
in order to specify the RMEPID as the target.
adGenY1731OneDmSessionTransmitEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1
A one-way frame-delay (1DM) performance monitoring session of a
local MEP. A 1DM PM session is unique based on target identifier
and VLAN priority. The target identifier is either a MAC address
or RMEPID. Inclusion…
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731OneDmSessionTargetRmepIdOrMacAddress adGenY1731OneDmSessionTarget adGenY1731OneDmSessionVlanPriority
Column Syntax OID
adGenY1731OneDmSessionTargetRmepIdOrMacAddress
Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID, the local MEP will not be
able to initiate the 1DM session until a CCM has been received from the
RMEP
Enumeration
Enumerated Values:
1rmepId
2macAddress
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.1
adGenY1731OneDmSessionTarget
Octet string defining the target for the 1DM session.
If adGenY1731OneDmSessionTargetRmepIdOrMacAddress indicates the target
is a MEPID then the octet string should represent a MEPID between the
range 1-8191. Other…
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.2
adGenY1731OneDmSessionVlanPriority
VLAN Priority that will be used in all 1DM frames sent by this
1DM transmit session.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.3
adGenY1731OneDmSessionTargetRemoteMepIdentifier
Target MEPID for this 1DM session
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.4
adGenY1731OneDmSessionTargetMacAddress
Target MAC address for this 1DM session
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.5
adGenY1731OneDmSessionRowStatus
This OID is used to create/delete a transmit 1DM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.6
adGenY1731OneDmSessionAdminState
The administrative state of the 1DM transmit session.

True indicates that the 1DM session is to function normally and
actively transmit 1DMs towards the specified target, and false that
it is to cease fun…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.7
adGenY1731OneDmSessionStatus
Operational status of the 1DM transmit session. The minimum
attributes that need to be set before a MEP can transmit 1DMs towards
the target are: Target MEPID or MAC Address and admin state. If a
MEPID is used to sp…
Enumeration
Enumerated Values:
1running
2notRunning
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.8
adGenY1731OneDmSessionStatusString
Operational status string of the 1DM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will explain the reason.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.9
adGenY1731OneDmSessionInterframeDelay
Amount of time in milliseconds between 1DM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms.
Integer32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.10
adGenY1731OneDmSessionSize
Size of the 1DM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.

The supported values are:
0 to indicate Data TLV should not be included in 1DM sent.
64 to 200…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.11
adGenY1731OneDmSessionData
Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.75.2.1.3.7.2.1.12

adGenY1731OneDmSessionReceiveTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.7.3 · 1 row entry · 2 columns
Open in standard view 
The one-way frame-delay (ETH-1DM) receive table for a given local MEP.
          
The local MEP's 1DM receive attributes can be edited using this table.
These settings are common across all 1DM sessions the local MEP is
receiving.
          
As the receiver of 1DM frames, the Local MEP does not have any 
information about the 1DM transmit configuration on the far-end RMEP 
that is originating the 1DM frames and thus the receiving MEP cannot
pair the received 1DM frames with a 1DM transmit table entry.  The
1DM receive attributes must be configured at the Local MEP scope.
adGenY1731OneDmSessionReceiveEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.7.3.1
The one-way frame-delay (1DM) performance monitoring session receive
attributes of a local MEP.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731OneDmSessionMeasurementInterval
Interval in seconds over which statistics are generated for received
one-way frame delay sessions. The supported range is 60 - 900 seconds
and the default value is 60. The statistics calculated for a
measurement int…
Integer32r/w
Constraints:
range: 60-900
 .1.3.6.1.4.1.664.5.75.2.1.3.7.3.1.1
adGenY1731OneDmSessionBulkDataExportFileTypes
Determines which, if any, files are generated by one-way frame delays
calculated from received 1DM frames.

The files are used to store one-way frame-delay statistics.
The average setting will enable sto…
Enumerationr/w
Enumerated Values:
1none
2average
3raw
4averageAndRaw
 .1.3.6.1.4.1.664.5.75.2.1.3.7.3.1.2

adGenY1731SlmSessionTransmitTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.8.2 · 1 row entry · 14 columns
Open in standard view 
The synthetic single-ended frame-loss (SLM) session table for a given 
local MEP.  The main difference between synthetic frame-loss (ETH-SLM)
and normal frame-loss (ETH-LMM) is that ETH-SLM only counts the 
synthetic it generates where as ETH-LMM counts all data frames.
          
A local MEP's SLM sessions can be created, edited, and deleted using
this table.  A local MEP can target a remote MEP to run single-ended 
frame-loss measurements using synthetic traffic between the two MEPs in
the MEG.
          
The target can be specified by either using a MAC address of the target
MEP or the MEPID of the target MEP.  For the SLM session to go active, 
the local MEP must be successfully receiving CCMs from the remote MEP
in order to specify the RMEPID as the target.
adGenY1731SlmSessionTransmitEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1
A synthetic single-ended frame-loss (SLM) performance monitoring
session of a local MEP. A SLM PM session is unique based on target
identifier and VLAN priority. The target identifier is either a MAC
address or RME…
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier adGenY1731SlmSessionTargetRmepIdOrMacAddress adGenY1731SlmSessionTarget adGenY1731SlmSessionVlanPriority
Column Syntax OID
adGenY1731SlmSessionTargetRmepIdOrMacAddress
Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID the local MEP will not be
able to initiate the SLM session until a CCM has been received from the
RMEP
Enumeration
Enumerated Values:
1rmepId
2macAddress
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.1
adGenY1731SlmSessionTarget
Octet string defining the target for the SLM session.
If adGenY1731SlmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a MEPID between the
range 1-8191. Otherwi…
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.2
adGenY1731SlmSessionVlanPriority
VLAN Priority that will be used in all SLM frames sent by this
SLM transmit session.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.3
adGenY1731SlmSessionTargetRemoteMepIdentifier
Target MEPID for this SLM session
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.4
adGenY1731SlmSessionTargetMacAddress
Target MAC address for this SLM session
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.5
adGenY1731SlmSessionRowStatus
This OID is used to create/delete a transmit SLM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.6
adGenY1731SlmSessionAdminState
The administrative state of the SLM transmit session.

True indicates that the SLM session is to function normally and
actively transmit SLMs towards the specified target, and false that
it is to cease fun…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.7
adGenY1731SlmSessionStatus
Operational status of the SLM transmit session. The minimum
attributes that need to be set before a MEP can transmit SLMs towards
the target are: Target MEPID or MAC Address and admin state. If a
MEPID is used to sp…
Enumeration
Enumerated Values:
1running
2notRunning
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.8
adGenY1731SlmSessionStatusString
Operational status string of the SLM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will explain the reason.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.9
adGenY1731SlmSessionInterframeDelay
Amount of time in milliseconds between SLM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms.
Integer32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.10
adGenY1731SlmSessionMeasurementInterval
Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interval are stored in the averaged data
file.…
Integer32r/w
Constraints:
range: 60-900
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.11
adGenY1731SlmSessionSize
Size of the SLM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.

The supported values are:
0 to indicate Data TLV should not be included in SLM sent.
64 to 200…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.12
adGenY1731SlmSessionData
Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.13
adGenY1731SlmSessionBulkDataExportFileTypes
Determines which, if any, files are generated by this SLM transmit
session. The files are used to store synthetic single-ended frame-loss
statistics. The average setting will enable storage of statistics
generated b…
Enumerationr/w
Enumerated Values:
1none
2average
3raw
4averageAndRaw
 .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.14

adGenY1731ClmReceiverTable

table
.1.3.6.1.4.1.664.5.75.2.1.3.9.1 · 1 row entry · 3 columns
Open in standard view 
A local MEP can be provisioned to calculate near-end frame-loss between 
it and a known RMEP by monitoring sequence numbers in received CCMs.  
This method is referred to as CLM and if the local MEP is enabled for 
CLM it will perform the calculation for each RMEP in its MEP-database.
adGenY1731ClmReceiverEntry entry .1.3.6.1.4.1.664.5.75.2.1.3.9.1.1
The receive properties for a local MEP's CLM function. The properties
are unique to a local MEP.
Indexes
adGenY1731MegLevel adGenY1731MegNameFormat adGenY1731MegNameLengthAndName adGenY1731LocalMepIdentifier
Column Syntax OID
adGenY1731ClmReceiverEnabled
Configures the administrative state of the local MEP's ETH-CLM
function. If the ETH-CLM function is enabled, the MEP will monitor the
sequence-numbers in CCMs received from known RMEPs for frame-loss.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.1
adGenY1731ClmReceiverMeasurementInterval
Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interval are stored in the averaged data
file.
Integer32r/w
Constraints:
range: 60-900
 .1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.2
adGenY1731ClmReceiverBulkDataExportFileTypes
Determines which, if any, files are generated by this local MEP's CLM
function. The files are used to store near-end frame-loss statistics
calculated by the local MEP's CLM function. The average setting will
enable s…
Enumerationr/w
Enumerated Values:
1none
2average
 .1.3.6.1.4.1.664.5.75.2.1.3.9.1.1.3