adGenY1731DmmSessionAdminState
ADTRAN-GEN-Y1731-MIB ·
.1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.7
Object
The administrative state of the DMM transmit session.
True indicates that the DMM session is to function normally and
actively transmit DMMs towards the specified target, and false that
it is to cease functioning.
Context
- MIB
- ADTRAN-GEN-Y1731-MIB
- OID
.1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenY1731DmmSessionTransmitEntry
- Table
- adGenY1731DmmSessionTransmitTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenY1731DmmSessionTargetRmepIdOrMacAddress Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID, the local MEP will not be
able to initiate the DMM session until … | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.1 |
| adGenY1731DmmSessionInterframeDelay Amount of time in milliseconds between DMM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.10 |
| adGenY1731DmmSessionMeasurementInterval Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interv… | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.11 |
| adGenY1731DmmSessionSize Size of the DMM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.
The supported values are:
0 to indicate Data TLV shoul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.12 |
| adGenY1731DmmSessionData Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00. | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.13 |
| adGenY1731DmmSessionBulkDataExportFileTypes Determines which, if any, files are generated by this DMM transmit
session. The files are used to store two-way frame-delay statistics.
The average setting will enable storage o… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.14 |
| adGenY1731DmmSessionTarget Octet string defining the target for the DMM session.
If adGenY1731DmmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a M… | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.2 |
| adGenY1731DmmSessionVlanPriority VLAN Priority that will be used in all DMM frames sent by this
DMM transmit session. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.3 |
| adGenY1731DmmSessionTargetRemoteMepIdentifier Target MEPID for this DMM session | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.4 |
| adGenY1731DmmSessionTargetMacAddress Target MAC address for this DMM session | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.5 |
| adGenY1731DmmSessionRowStatus This OID is used to create/delete a transmit DMM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.6 |
| adGenY1731DmmSessionStatus Operational status of the DMM transmit session. The minimum
attributes that need to be set before a MEP can transmit DMMs towards
the target are: Target MEPID or MAC Address and… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.8 |
| adGenY1731DmmSessionStatusString Operational status string of the DMM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will ex… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.9 |