adGenY1731LmmSessionAdminState
ADTRAN-GEN-Y1731-MIB ·
.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.7
Object
The administrative state of the LMM transmit session.
True indicates that the LMM session is to function normally and
actively transmit LMMs towards the specified target, and false that
it is to cease functioning.
Context
- MIB
- ADTRAN-GEN-Y1731-MIB
- OID
.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenY1731LmmSessionTransmitEntry
- Table
- adGenY1731LmmSessionTransmitTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenY1731LmmSessionTargetRmepIdOrMacAddress Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID the local MEP will not be
able to initiate the LMM session until a… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.1 |
| adGenY1731LmmSessionInterframeDelay Amount of time in milliseconds between LMM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.10 |
| adGenY1731LmmSessionMeasurementInterval Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interv… | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.11 |
| adGenY1731LmmSessionSize Size of the LMM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.
The supported values are:
0 to indicate Data TLV shoul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.12 |
| adGenY1731LmmSessionData Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00. | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.13 |
| adGenY1731LmmSessionBulkDataExportFileTypes Determines which, if any, files are generated by this LMM transmit
session. The files are used to store single-ended frame-loss
statistics. The average setting will enable sto… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.14 |
| adGenY1731LmmSessionTarget Octet string defining the target for the LMM session.
If adGenY1731LmmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a M… | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.2 |
| adGenY1731LmmSessionVlanPriority VLAN Priority that will be used in all LMM frames sent by this
LMM transmit session. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.3 |
| adGenY1731LmmSessionTargetRemoteMepIdentifier Target MEPID for this LMM session | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.4 |
| adGenY1731LmmSessionTargetMacAddress Target MAC address for this LMM session | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.5 |
| adGenY1731LmmSessionRowStatus This OID is used to create/delete a transmit LMM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.6 |
| adGenY1731LmmSessionStatus Operational status of the LMM transmit session. The minimum
attributes that need to be set before a MEP can transmit LMMs towards
the target are: Target MEPID or MAC Address and… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.8 |
| adGenY1731LmmSessionStatusString Operational status string of the LMM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will ex… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.9 |