adGenY1731LocalMepLbmDataTlv
ADTRAN-GEN-Y1731-MIB ·
.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.8
Object
column
r/w
OctetString
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
Context
- MIB
- ADTRAN-GEN-Y1731-MIB
- OID
.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenY1731LocalMepLbmTransmitEntry
- Table
- adGenY1731LocalMepLbmTransmitTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenY1731LocalMepLbmStatus A Boolean flag where true means the MEP is actively sending LBM messages
and false means that no LBMs are being transmitted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.1 |
| adGenY1731LocalMepLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.
For more information about VLAN Drop Enable, please check
IEEE 802.1ad. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.10 |
| adGenY1731LocalMepLbmErrorStatus MEP Loopback error status. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.11 |
| adGenY1731LocalMepLbmTimeout MEP Loopback Timeout in milliseconds. | column | Unsigned32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.12 |
| adGenY1731LocalMepLbmInterframeDelay MEP Loopback Interframe Delay in milliseconds. | column | Unsigned32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.13 |
| adGenY1731LocalMepLbmNextTransId Next transaction identifier to be sent in a Loopback message. This
transaction identifier can be zero because it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.14 |
| adGenY1731LocalMepLbmSize Size of the LBM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.
The supported values are:
0 to indicate Data TLV shoul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.15 |
| adGenY1731LocalMepValidateData A Boolean flag where true means the data sent in LBM message has to be
validated with the LBR. False indicates no validation is required. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.16 |
| adGenY1731LocalMepLbmConfigStatus True means the MEP is ready for configuring LBM and a false means the MEP
is under LBM configuration. This flag is used to prevent simultaneous
configuration by more than one u… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.2 |
| adGenY1731LocalMepLbmDestMacAddress The Target MAC Address Field to be transmitted. This is a unicast
destination MAC address.
This address will be used if the value of the column
adGenY1731LocalMep… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.3 |
| adGenY1731LocalMepLbmDestMepId The MEG End Point Identifier of another MEP in the same MEG to which
the LBM is to be sent. This address will be used if the value of the
column adGenY1731LocalMepTransmitLbmDestI… | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.4 |
| adGenY1731LocalMepLbmDestIsMepId True indicates that MEPID of the target MEP is used for Loopback
transmission. False indicates that unicast destination MAC address of
the target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.5 |
| adGenY1731LocalMepLbmMessageCount The number of Loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.6 |
| adGenY1731LocalMepLbmActive Start or stop LBM transmission. By writing true, start LBM transmisson.
By writing false, stop LBM transmission | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.7 |
| adGenY1731LocalMepLbmVlanPriority The 3 bit priority value to be used in the VLAN tag, if present, in the
transmitted frame.
The default value is CCM priority. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.9 |