adGenY1731LocalMepLbmConfigStatus

ADTRAN-GEN-Y1731-MIB · .1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.2
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
True means the MEP is ready for configuring LBM and a false means the MEP 
is under LBM configuration. This flag is used to prevent simultaneous 
configuration by more than  one user. If one minute has passed since the 
last LocalMepLbm attribute was set, then it is assume the user has abandoned
configuring the session and the adGenY1731LocalMepLbmConfigStatus will be 
reset to true.

Context

MIB
ADTRAN-GEN-Y1731-MIB
OID
.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.2
Type
column
Access
readwrite
Status
current
Parent
adGenY1731LocalMepLbmTransmitEntry
Table
adGenY1731LocalMepLbmTransmitTable
Siblings
15

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenY1731LocalMepLbmStatus
A Boolean flag where true means the MEP is actively sending LBM messages and false means that no LBMs are being transmitted.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.1
adGenY1731LocalMepLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.10
adGenY1731LocalMepLbmErrorStatus
MEP Loopback error status.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.11
adGenY1731LocalMepLbmTimeout
MEP Loopback Timeout in milliseconds.
columnUnsigned32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.12
adGenY1731LocalMepLbmInterframeDelay
MEP Loopback Interframe Delay in milliseconds.
columnUnsigned32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.13
adGenY1731LocalMepLbmNextTransId
Next transaction identifier to be sent in a Loopback message. This transaction identifier can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.14
adGenY1731LocalMepLbmSize
Size of the LBM in bytes. The size encompasses the entire Ethernet frame from the header through the FCS. The supported values are: 0 to indicate Data TLV shoul…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.15
adGenY1731LocalMepValidateData
A Boolean flag where true means the data sent in LBM message has to be validated with the LBR. False indicates no validation is required.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.16
adGenY1731LocalMepLbmDestMacAddress
The Target MAC Address Field to be transmitted. This is a unicast destination MAC address. This address will be used if the value of the column adGenY1731LocalMep…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.3
adGenY1731LocalMepLbmDestMepId
The MEG End Point Identifier of another MEP in the same MEG to which the LBM is to be sent. This address will be used if the value of the column adGenY1731LocalMepTransmitLbmDestI…
columnInteger32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.4
adGenY1731LocalMepLbmDestIsMepId
True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.5
adGenY1731LocalMepLbmMessageCount
The number of Loopback messages to be transmitted.
columnInteger32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.6
adGenY1731LocalMepLbmActive
Start or stop LBM transmission. By writing true, start LBM transmisson. By writing false, stop LBM transmission
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.7
adGenY1731LocalMepLbmDataTlv
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
columnOctetString.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.8
adGenY1731LocalMepLbmVlanPriority
The 3 bit priority value to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority.
columnInteger32.1.3.6.1.4.1.664.5.75.2.1.3.3.1.1.9