adGenY1731DmmSessionStatusString
ADTRAN-GEN-Y1731-MIB ·
.1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.9
Object
column
SNMPv2-TCDisplayString
Operational status string of the DMM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, this string will explain the reason.
Context
- MIB
- ADTRAN-GEN-Y1731-MIB
- OID
.1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenY1731DmmSessionTransmitEntry
- Table
- adGenY1731DmmSessionTransmitTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenY1731DmmSessionTargetRmepIdOrMacAddress Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID, the local MEP will not be
able to initiate the DMM session until … | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.1 |
| adGenY1731DmmSessionInterframeDelay Amount of time in milliseconds between DMM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.10 |
| adGenY1731DmmSessionMeasurementInterval Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interv… | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.11 |
| adGenY1731DmmSessionSize Size of the DMM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.
The supported values are:
0 to indicate Data TLV shoul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.12 |
| adGenY1731DmmSessionData Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00. | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.13 |
| adGenY1731DmmSessionBulkDataExportFileTypes Determines which, if any, files are generated by this DMM transmit
session. The files are used to store two-way frame-delay statistics.
The average setting will enable storage o… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.14 |
| adGenY1731DmmSessionTarget Octet string defining the target for the DMM session.
If adGenY1731DmmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a M… | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.2 |
| adGenY1731DmmSessionVlanPriority VLAN Priority that will be used in all DMM frames sent by this
DMM transmit session. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.3 |
| adGenY1731DmmSessionTargetRemoteMepIdentifier Target MEPID for this DMM session | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.4 |
| adGenY1731DmmSessionTargetMacAddress Target MAC address for this DMM session | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.5 |
| adGenY1731DmmSessionRowStatus This OID is used to create/delete a transmit DMM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.6 |
| adGenY1731DmmSessionAdminState The administrative state of the DMM transmit session.
True indicates that the DMM session is to function normally and
actively transmit DMMs towards the specified t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.7 |
| adGenY1731DmmSessionStatus Operational status of the DMM transmit session. The minimum
attributes that need to be set before a MEP can transmit DMMs towards
the target are: Target MEPID or MAC Address and… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.4.2.1.8 |