adGenY1731LmmSessionSize

Object

column r/w SNMPv2-SMIInteger32

Size of the LMM in bytes.  The size encompasses the entire Ethernet 
frame from the header through the FCS.  
              
The supported values are:
0 to indicate Data TLV should not be included in LMM sent.
64 to 2000 bytes to indicate the DataTLV should be included to increase
the frame length to the specified size.
              
If the Data TLV is not included, the LMM will be sent with the minimum
Ethernet frame size of 64-bytes but it will not contain the DataTLV.  A
zero-pad will be used to fulfill  the minimum length requirement.
              
The default value is 0.

Context

MIB: ADTRAN-GEN-Y1731-MIB
OID: .1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.12
Type: column
Access: readwrite
Status: current
Parent: adGenY1731LmmSessionTransmitEntry
Table: adGenY1731LmmSessionTransmitTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adGenY1731LmmSessionTargetRmepIdOrMacAddress Indicates whether the target specified is a MEPID or a unicast MAC Address. If the target specified is a MEPID the local MEP will not be able to initiate the LMM session until a…	column	Enumeration	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.1`
adGenY1731LmmSessionInterframeDelay Amount of time in milliseconds between LMM transmissions. The supported range is 100 - 10,000 ms and the default value is 1000 ms.	column	Integer32	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.10`
adGenY1731LmmSessionMeasurementInterval Interval in seconds over which statistics are generated. The supported range is 60 - 900 seconds and the default value is 60. The statistics calculated for a measurement interv…	column	Integer32	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.11`
adGenY1731LmmSessionData Data pattern to be used when padding is required to meet the size setting. The default value is 0x00 0x00.	column	OctetString	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.13`
adGenY1731LmmSessionBulkDataExportFileTypes Determines which, if any, files are generated by this LMM transmit session. The files are used to store single-ended frame-loss statistics. The average setting will enable sto…	column	Enumeration	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.14`
adGenY1731LmmSessionTarget Octet string defining the target for the LMM session. If adGenY1731LmmSessionTargetRmepIdOrMacAddress indicates the target is a MEPID then the octet string should represent a M…	column	OctetString	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.2`
adGenY1731LmmSessionVlanPriority VLAN Priority that will be used in all LMM frames sent by this LMM transmit session.	column	Integer32	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.3`
adGenY1731LmmSessionTargetRemoteMepIdentifier Target MEPID for this LMM session	column	Integer32	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.4`
adGenY1731LmmSessionTargetMacAddress Target MAC address for this LMM session	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.5`
adGenY1731LmmSessionRowStatus This OID is used to create/delete a transmit LMM session of a Local MEP. The only supported settings are createAndGo, createAndWait, and destroy.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.6`
adGenY1731LmmSessionAdminState The administrative state of the LMM transmit session. True indicates that the LMM session is to function normally and actively transmit LMMs towards the specified t…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.7`
adGenY1731LmmSessionStatus Operational status of the LMM transmit session. The minimum attributes that need to be set before a MEP can transmit LMMs towards the target are: Target MEPID or MAC Address and…	column	Enumeration	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.8`
adGenY1731LmmSessionStatusString Operational status string of the LMM transmit session. If the session is expected to be active but is not able to be due to a provisioning issue or conflict, this string will ex…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.75.2.1.3.5.2.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects