adGenY1731SlmSessionVlanPriority
ADTRAN-GEN-Y1731-MIB ·
.1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.3
Object
column
Integer32
VLAN Priority that will be used in all SLM frames sent by this SLM transmit session.
Context
- MIB
- ADTRAN-GEN-Y1731-MIB
- OID
.1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.3- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- adGenY1731SlmSessionTransmitEntry
- Table
- adGenY1731SlmSessionTransmitTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenY1731SlmSessionTargetRmepIdOrMacAddress Indicates whether the target specified is a MEPID or a unicast MAC
Address. If the target specified is a MEPID the local MEP will not be
able to initiate the SLM session until a… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.1 |
| adGenY1731SlmSessionInterframeDelay Amount of time in milliseconds between SLM transmissions. The
supported range is 100 - 10,000 ms and the default value is 1000 ms. | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.10 |
| adGenY1731SlmSessionMeasurementInterval Interval in seconds over which statistics are generated. The supported
range is 60 - 900 seconds and the default value is 60. The statistics
calculated for a measurement interv… | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.11 |
| adGenY1731SlmSessionSize Size of the SLM in bytes. The size encompasses the entire Ethernet
frame from the header through the FCS.
The supported values are:
0 to indicate Data TLV shoul… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.12 |
| adGenY1731SlmSessionData Data pattern to be used when padding is required to meet the size
setting. The default value is 0x00 0x00. | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.13 |
| adGenY1731SlmSessionBulkDataExportFileTypes Determines which, if any, files are generated by this SLM transmit
session. The files are used to store synthetic single-ended frame-loss
statistics. The average setting will e… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.14 |
| adGenY1731SlmSessionTarget Octet string defining the target for the SLM session.
If adGenY1731SlmSessionTargetRmepIdOrMacAddress indicates the target is
a MEPID then the octet string should represent a M… | column | OctetString | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.2 |
| adGenY1731SlmSessionTargetRemoteMepIdentifier Target MEPID for this SLM session | column | Integer32 | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.4 |
| adGenY1731SlmSessionTargetMacAddress Target MAC address for this SLM session | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.5 |
| adGenY1731SlmSessionRowStatus This OID is used to create/delete a transmit SLM session of a Local
MEP. The only supported settings are createAndGo, createAndWait, and
destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.6 |
| adGenY1731SlmSessionAdminState The administrative state of the SLM transmit session.
True indicates that the SLM session is to function normally and
actively transmit SLMs towards the specified t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.7 |
| adGenY1731SlmSessionStatus Operational status of the SLM transmit session. The minimum
attributes that need to be set before a MEP can transmit SLMs towards
the target are: Target MEPID or MAC Address and… | column | Enumeration | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.8 |
| adGenY1731SlmSessionStatusString Operational status string of the SLM transmit session. If the session
is expected to be active but is not able to be due to a provisioning
issue or conflict, this string will ex… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.75.2.1.3.8.2.1.9 |