rcSysTrapRecvTable

table deprecated

.1.3.6.1.4.1.2272.1.1.60 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysTrapRecvTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysTrapRecvTable'

Copy

The trap receiver table (0 to 25 entries).  This
table lists the addresses of Network Management
Stations that should receive trap messages from 
this entity when an exception condition occurs.

rcSysTrapRecvEntry row .1.3.6.1.4.1.2272.1.1.60.1

A trap receiver table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysTrapRecvAddressdeprecated IP address for trap receiver.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.60.1.1
rcSysTrapRecvVersiondeprecated The version of trap receiver.	Enumerationr/w	.1.3.6.1.4.1.2272.1.1.60.1.2
rcSysTrapRecvCommunitydeprecated Community string used for trap messages to this trap receiver.	OctetStringr/w Enumerated Values: 0 none 1 ip 2 ipx802dot3 3 ipx802dot2 4 ipxSnap 5 ipxEthernet2 6 appleTalk 7 decLat 8 decOther 9 sna802dot2 10 snaEthernet2 11 netBios 12 xns 13 vines 14 ipV6 15 usrDefined 16 rarp 17 pPPoE 18 arp	.1.3.6.1.4.1.2272.1.1.60.1.3
rcSysTrapRecvSrcAddressdeprecated Source IP address to use when sending traps. This IP address will be inserted into the source IP address field in the UDP trap packet.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.60.1.4
rcSysTrapRecvRowStatusdeprecated Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.60.1.5

rcSysAccessPolicyTable

table

.1.3.6.1.4.1.2272.1.1.61 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysAccessPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysAccessPolicyTable'

Copy

Management access policy table.  This table is 
used to permit or deny access to this device via
the specified source Id.

rcSysAccessPolicyEntry row .1.3.6.1.4.1.2272.1.1.61.1

An access policy table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysAccessPolicyId Policy Id.	Integer32	.1.3.6.1.4.1.2272.1.1.61.1.1
rcSysAccessPolicyName Name of this policy.	OctetStringr/w	.1.3.6.1.4.1.2272.1.1.61.1.2
rcSysAccessPolicyPolicyEnable Indicate whether this policy is currently active.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.3
rcSysAccessPolicyMode Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access.	Enumerationr/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.1.61.1.4
rcSysAccessPolicyService Is represented as bitset to indicate which protocol this entry should be applied to. Value is one of multiple(logical 'OR') of the following values: telnet(1): enables telnet service snmp(2): enables snmp service tftp(…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.1.61.1.5
rcSysAccessPolicyPrecedence Used to indicate the precedence of this policy. The Lower the number the higher the precedence.	Integer32r/w	.1.3.6.1.4.1.2272.1.1.61.1.6
rcSysAccessPolicyNetAddr Source network IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.61.1.7
rcSysAccessPolicyNetMask Source network mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.61.1.8
rcSysAccessPolicyTrustedHostAddr Trusted IP address of host performing a rlogin into the device.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.61.1.9
rcSysAccessPolicyTrustedHostUserName User name on the trusted host performing a rlogin into the device.	OctetStringr/w	.1.3.6.1.4.1.2272.1.1.61.1.10
rcSysAccessPolicyAccessLevel Access level of trusted host.	Enumerationr/w	.1.3.6.1.4.1.2272.1.1.61.1.11
rcSysAccessPolicyLog Used to indicate whether logging should be performed if this policy was applied.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.12
rcSysAccessPolicyUsage Usage Counter	SNMPv2-SMICounter32 Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.1.61.1.13
rcSysAccessPolicyRowStatus Used to create/delete an entry	SNMPv2-TCRowStatusr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.61.1.14
rcSysAccessPolicyAccessStrict Used to restrict the access level specified in the system access policy table to exactly the same access level as specified by user. If TRUE then only the access level in the policy table is allowed access. If FALSE, th…	SNMPv2-TCTruthValuer/w Constraints: range: 1-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.15
rcSysAccessPolicyNetInetAddrType Source network Inet Address Type.	Enumerationr/w Enumerated Values: 1 ethernet2 2 llc 3 snap 4 all 5 notapplicable	.1.3.6.1.4.1.2272.1.1.61.1.16
rcSysAccessPolicyNetInetAddress Source network Inet Address (prefix/network).	INET-ADDRESS-MIBInetAddressr/w Enumerated Values: 1 none 2 naap 3 enforceable 4 peering Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.61.1.17
rcSysAccessPolicyNetInetAddrPrefixLen Source network Inet Address Prefix-Length/Mask.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-0 range: 10-1000000	.1.3.6.1.4.1.2272.1.1.61.1.18
rcSysAccessPolicyTrustedHostInetAddress Trusted Inet address of host performing a rlogin into the device.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.61.1.19

rcSysTrapSenderTable

table

.1.3.6.1.4.1.2272.1.1.62 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysTrapSenderTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysTrapSenderTable'

Copy

The trap sender table (0 to 25 entries).  This
table lists the addresses of Network Management
Stations and the Source Address that should receive 
trap messages from this entity when an exception 
condition occurs.

rcSysTrapSenderEntry row .1.3.6.1.4.1.2272.1.1.62.1

A trap sender table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysTrapSenderRecvAddress IP address for trap receiver.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.62.1.1
rcSysTrapSenderSrcAddress IP address for trap sender.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.62.1.2

rcSysDnsServerListTable

table

.1.3.6.1.4.1.2272.1.1.64 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysDnsServerListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysDnsServerListTable'

Copy

DNS serever list table used to store the 
details of the DNS server configured.

rcSysDnsServerListEntry row .1.3.6.1.4.1.2272.1.1.64.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysDnsServerListType Type of the DNS server	Enumerationr/w	.1.3.6.1.4.1.2272.1.1.64.1.1
rcSysDnsServerListIpdeprecated IP address of the DNS server	SNMPv2-SMIIpAddressr/w Enumerated Values: 0 nlbAdminDisable 1 nlbAdminIgmpMcast 2 nlbAdminMulticast 4 nlbAdminUnicast Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.64.1.2
rcSysDnsServerListStatus Status of DNS server	Enumeration Enumerated Values: 0 nlbOperDisable 1 nlbOperIgmpMcast 2 nlbOperMulticast 4 nlbOperUnicast	.1.3.6.1.4.1.2272.1.1.64.1.3
rcSysDnsServerListRequestCount Number of request send to this server	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.1.64.1.4
rcSysDnsServerListSuccessCount Number of request send to this server which are successful	SNMPv2-SMICounter32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.1.64.1.5
rcSysDnsServerListRowStatus Used to create/delete DNS server entries in rcSysDnsServerListTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.64.1.6
rcSysDnsServerListAddressType The type of ip address configured by the DNS server	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.1.64.1.7
rcSysDnsServerListAddress The ip address configured by the DNS server	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.64.1.8

rcSysDnsHostTable

table

.1.3.6.1.4.1.2272.1.1.65 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysDnsHostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysDnsHostTable'

Copy

DNS Host table.

rcSysDnsHostEntry row .1.3.6.1.4.1.2272.1.1.65.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysDnsHostData Host Name or Host IP Address.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.1.65.1.1
rcSysDnsHostName Host Name.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.1.65.1.2
rcSysDnsHostIpAddressdeprecated Host IP Address.	SNMPv2-SMIIpAddress Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.1.65.1.3
rcSysDnsHostSource DNS Server IP or /etc/host file.	OctetString	.1.3.6.1.4.1.2272.1.1.65.1.4
rcSysDnsHostAddressType The type of ip address for the DNS host	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.1.65.1.5
rcSysDnsHostAddress The ip address of the DNS host	INET-ADDRESS-MIBInetAddress Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.1.65.1.6

rcSysFrcMsgControlTable

table

.1.3.6.1.4.1.2272.1.1.94 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysFrcMsgControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysFrcMsgControlTable'

Copy

Management Force-msg Control table. This table is used to
specify the pattern for Force-msg Control

rcSysFrcMsgControlEntry row .1.3.6.1.4.1.2272.1.1.94.1

A Force-msg Control table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysFrcMsgControlPatternId Pattern Id.	Integer32	.1.3.6.1.4.1.2272.1.1.94.1.1
rcSysFrcMsgControlPattern Pattern for filtering the force-msg for msg control	OctetStringr/w	.1.3.6.1.4.1.2272.1.1.94.1.2
rcSysFrcMsgControlRowStatus Used to create/delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.94.1.3

rcSysAccPolSnmpGrpTable

table

.1.3.6.1.4.1.2272.1.1.95 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysAccPolSnmpGrpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysAccPolSnmpGrpTable'

Copy

SNMP group list for access policy

rcSysAccPolSnmpGrpEntry row .1.3.6.1.4.1.2272.1.1.95.1

The table entry which covers the groups under snmp service.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysAccPolSnmpGrpName The snmp-v3 group name	OctetString	.1.3.6.1.4.1.2272.1.1.95.1.1
rcSysAccPolSnmpGrpModel The snmp model	SNMP-FRAMEWORK-MIBSnmpSecurityModel Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.1.95.1.2
rcSysAccPolSnmpGrpRowStatus Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.95.1.3

rcSysSoftwareTable

table

.1.3.6.1.4.1.2272.1.1.120 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSysSoftwareTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSysSoftwareTable'

Copy

A list of software releases added to the switch. Maximum
of 6 added releases can be present in the switch.

rcSysSoftwareEntry row .1.3.6.1.4.1.2272.1.1.120.1

Defines a row of rcSysSoftware Table using
RcSysSoftwareEntry Type.

Indexes

No indexes recorded

Column	Syntax	OID
rcSysReleaseName Software Release Name	OctetString	.1.3.6.1.4.1.2272.1.1.120.1.1
rcSysReleaseAddedTime Software Release Added Date and Time	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.1.120.1.2
rcSysReleaseActivatedTime Software Release Activated Date and Time	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.1.120.1.3
rcSysReleaseCommittedTime Software Release Committed Date and Time	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.1.120.1.4
rcSysReleaseCommittedType Software Release Committed Type	Enumeration	.1.3.6.1.4.1.2272.1.1.120.1.5
rcSysReleaseType Software Release Type. This element tells whether the release is a primary release for the switch or a backup release or that the release has been added to the switch but is not being used currently.	Enumeration	.1.3.6.1.4.1.2272.1.1.120.1.6

rcVlanTable

table

.1.3.6.1.4.1.2272.1.3.2 · 1 row entry · 78 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanTable'

Copy

A list of Virtual LAN entries. The number of entries
is given by rcVlanNumVlans.

rcVlanEntry row .1.3.6.1.4.1.2272.1.3.2.1

Entry containing configuration information for a
particular Virtual LAN.

The relationship between the various port sets in a
VLAN Entry are :

o The set of ports defined by PortMembers must be…

Indexes

rcVlanPortIndex

Column	Syntax	OID
rcVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNone Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.2.1.1
rcVlanName An administratively-assigned name for this VLAN.	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.2.1.2
rcVlanColor An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen.	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.3.2.1.3
rcVlanHighPriorityobsolete A flag to note whether frames in this VLAN should be assigned a high switching priority.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 access 2 trunk Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.4
rcVlanRoutingEnableobsolete A flag to note whether IP routing is enabled in this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.5
rcVlanIfIndex When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.6
rcVlanAction VLAN related actions.	Enumerationr/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.3.2.1.7
rcVlanResult The result from the last VLAN action.	Enumeration Enumerated Values: 1 true 2 false 3 tagPvidOnly 4 untagPvidOnly	.1.3.6.1.4.1.2272.1.3.2.1.8
rcVlanStgId Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero.	Integer32r/w Enumerated Values: 1 normal 2 uni 3 nni	.1.3.6.1.4.1.2272.1.3.2.1.9
rcVlanType The type of VLAN, distinguished according to the policy used to define its port membership. VSP9000 does not support bySvlan(6) and ByIds(7).	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.10
rcVlanPortMembers The set of ports that are members (static or dynamic) of this VLAN.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.11
rcVlanActiveMembers The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.12
rcVlanStaticMembers The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.13
rcVlanNotAllowToJoin The set of ports that are not allowed to become members of this VLAN.	PortSetr/w Enumerated Values: 1 portDown 2 vlanBlock 3 macDiscard Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.14
rcVlanProtocolId The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.15
rcVlanSubnetAddr The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.16
rcVlanSubnetMask The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.17
rcVlanAgingTime The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.18
rcVlanMacAddress The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1).	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.2.1.19
rcVlanRowStatus Used to create/delete entries in the rcVlanTable.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 sourceMac 2 subnet Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.2.1.20
rcVlanIgmpSnoopEnableobsolete A flag to note whether IGMP Snooping is enabled on this VLAN.	SNMPv2-TCTruthValuer/w Constraints: range: 0-512 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.21
rcVlanIgmpSnoopReportProxyEnableobsolete A flag to note whether IGMP Report Proxy is enabled on this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.22
rcVlanIgmpSnoopRobustnessobsolete This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is robust to (Robustness - 1) packet losses.	Integer32r/w Enumerated Values: 1 trunk 2 isolated 3 promiscuous 4 none	.1.3.6.1.4.1.2272.1.3.2.1.23
rcVlanIgmpSnoopQueryIntervalobsolete The interval (in seconds) between IGMP Host-Query packets transmitted on this interface.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.24
rcVlanIgmpSnoopMRouterPortsobsolete The set of ports in this VLAN that provide connectivity to an IP Multicast router.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.25
rcVlanUserDefinedPid When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.26
rcVlanIgmpSnoopActiveMRouterPortsobsolete Active ports.	PortSet Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.2.1.27
rcVlanProtocolIds Bitfield of protocol ids.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.28
rcVlanIgmpSnoopActiveQuerierobsolete IP address of multicast querier router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.29
rcVlanIgmpSnoopMRouterExpirationobsolete Multicast querier router aging time out.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.30
rcVlanIgmpSnoopQuerierPortobsolete The port on which the multicast querier router was heard.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.31
rcVlanUserPriority User priority level.	Enumeration	.1.3.6.1.4.1.2272.1.3.2.1.32
rcVlanQosLevel Used to specify the Qos level packets, carried in this VLAN, should be processed with.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.33
rcVlanTosValue Tos value.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.34
rcVlanEncap This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.35
rcVlanFirewallVlanType This is the firewall vlan type for port based vlans.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.36
rcVlanFdbAging The timeout period (in seconds) used for aging out fdb entries of this VLAN.	Integer32r/w Enumerated Values: 1 dynamic 2 static 3 blocked	.1.3.6.1.4.1.2272.1.3.2.1.37
rcVlanUpdateDynamicMacQosLevel It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a subnet-based or protocol-based vlan when vlan qos level changes. If it is set to TRUE, qos level for all dynamic l…	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.3.2.1.38
rcVlanUserDefinedPidList A list of Protocol Id to usrDefined in a protocol-based VLAN, this field represents the list user defined protocol identifier.	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.2.1.39
rcVlanIgmpVer1SnoopMRouterPorts The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP Version 1.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.40
rcVlanIgmpVer2SnoopMRouterPorts The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP version 2.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.41
rcVlanTlsIpmc Enable/disable the IP Mcast for this SP IP service Vlan for TLS OE feature	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.3.2.1.42
rcVlanFirewallClusterId Firewall cluster Id	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.43
rcVlanOspfPassivePortMember The set of ports in the vlan that are designated as ospf passive	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.44
rcVlanUnkDstMacDiscard Enable/disable Unknown Destination Mac Discard on Vlan	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.3.2.1.45
rcVlanNlbMode NLB mode set on a VLAN.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.2.1.46
rcVlanOperNlbMode Oper NLB mode of a VLAN.	Enumeration	.1.3.6.1.4.1.2272.1.3.2.1.47
rcVlanVrfId Indicates the Virtual Router to which the VLAN belongs	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.3.2.1.48
rcVlanVrfName The Name of the Virtual Router to which the VLAN belongs	OctetString	.1.3.6.1.4.1.2272.1.3.2.1.49
rcVlanMgmtVlan This displays the management vlan configuration	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.50
rcVlanApplyBtagEthertype Used to apply user configured btag ethertype to the Vlan	SNMPv2-TCTruthValuer/w Enumerated Values: 1 denyTx 2 denyRx 3 denyBoth Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.51
rcVlanMmrp This displays the MMRP enable state for the vlan	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.3.2.1.52
rcVlanSource This object indicates how this VLAN was created: static(1) - Indicates the VLAN was manually configured by an operator. dynamicMvmp(2) - Indicates the VLAN was dynamically creat…	Enumeration	.1.3.6.1.4.1.2272.1.3.2.1.53
rcVlanNodalMepList List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... The maximum number of n…	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.2.1.54
rcVlanNumOfNodalMep Number of nodal meps assigned to this vlan	Integer32	.1.3.6.1.4.1.2272.1.3.2.1.55
rcVlanNodalMipLevelList List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an integer ranging from 0 to 7. The mip levels are separated by ','…	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.2.1.56
rcVlanNumOfNodalMipLevel Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis.	Integer32	.1.3.6.1.4.1.2272.1.3.2.1.57
rcVlanDhcpOption82Enabled This object is used to control whether DHCP option 82 is enabled for this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.58
rcVlanIpMultinettingEnable Indicate if the vlan is an Ip Multinetting vlan. If enabled, rcVlanAssociatedIpMultinettingVlan should be set to 0	SNMPv2-TCTruthValuer/w Enumerated Values: 0 none 1 flushEntry 2 flushGrp Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.59
rcVlanAssociatedIpMultinettingVlan Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable attribute is set	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.60
rcVlanPlsbIsid Plsb i-sid number assigned to a C-vlan or the i-sid value for primary private VLAN. Default 0 value indicates that no i-sid has been assigned.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.61
rcVlanVoiceEnabled This object is used to control whether voice option is enabled for this VLAN.	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.62
rcVlanRmonEnable Indicate if the vlan is enabled for Remote Monitoring	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.63
rcVlanIpsecEnabledeprecated Indicate if the vlan is enabled for IPSEC. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated	SNMPv2-TCTruthValuer/w Enumerated Values: 0 no 1 yes Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.64
rcVlanLPortMembers The set of logical ports (for example, WLAN tunnels) that are members (dynamic) of this VLAN.	LPortSet Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.3.2.1.65
rcVlanLPortActiveMembers The set of logical ports (for example, WLAN tunnels) that are currently active in this VLAN. Active ports include all dynamic ports where the VLAN policy was met.	LPortSet Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.3.2.1.66
rcVlanLPortStaticMembers The set of logical ports (for example, WLAN tunnels) that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.	LPortSet Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.2.1.67
rcVlanLPortNotAllowToJoin The set of logical ports (for example, WLAN tunnels) that are not allowed to become members of this VLAN.	LPortSet Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.3.2.1.68
rcVlanRspanEnabled This object is used to control whether rspan option is enabled for this VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.69
rcVlanSpbMcast Enable/disable SPB multicast on Vlan	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.3.2.1.70
rcVlanSecondaryVlanId A value that uniquely identifies the secondary Virtual LAN associated with the primary private VLAN. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNoner/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.2.1.71
rcVlanSecondaryIsid The i-sid number assigned to a secondary VLAN if it exists. Default 0 value.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.2.1.72
rcVlanPimGatewayEnable Enable/disable PIM Gateway on Vlan	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.73
rcVlanIpv6FhsSnoopDhcpEnable Indicate if IPv6 DHCP snooping is enabled on the vlan	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.74
rcVlanIpv6FhsNDInspectionEnable Indicate if ND inspection is enabled on the vlan	SNMPv2-TCTruthValuer/w Enumerated Values: 1 portDown 2 vlanBlock 3 macDiscard Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.75
rcVlanDvrEnable Enable/disable DVR on Vlan	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.2.1.76
rcVlanDvrGwIpv4Addr Gateway IPv4 address for this DVR enabled node on Vlan.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.77
rcVlanUntaggedPortMembers The set of untagged ports that are members of this VLAN.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.78

rcVlanPortTable

table

.1.3.6.1.4.1.2272.1.3.3 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanPortTable'

Copy

A table used to maintain VLAN port related 
information.

rcVlanPortEntry row .1.3.6.1.4.1.2272.1.3.3.1

Entry containing VLAN information regarding a
particular port.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanPortIndex An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port.	Integer32 Constraints: range: 0-440	.1.3.6.1.4.1.2272.1.3.3.1.1
rcVlanPortNumVlanIds Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.3.1.2
rcVlanPortVlanIds An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN…	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.3.1.3
rcVlanPortType The type of port: access(1) or trunk(2).	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.3.1.4
rcVlanPortDiscardTaggedFrames A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are processed normall…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.5
rcVlanPortDiscardUntaggedFrames A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are assigned to the…	SNMPv2-TCTruthValuer/w Constraints: range: 1-4094 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.6
rcVlanPortDefaultVlanId The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port.	Integer32r/w	.1.3.6.1.4.1.2272.1.3.3.1.7
rcVlanPortPerformTagging Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic.	Enumerationr/w Constraints: range: 0-440	.1.3.6.1.4.1.2272.1.3.3.1.8
rcVlanPortSVlanPortType The type of port.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.3.1.9
rcVlanPortLoopDetect Enable/disable loop detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.10
rcVlanPortFirstPortInOpid This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.3.1.11
rcVlanPortLastPortInOpid This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.3.1.12
rcVlanPortUntagDefaultVlan enable/disable Egress Tagging on the Default Vlan of the port.	SNMPv2-TCTruthValuer/w Constraints: range: 1-4094 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.13
rcVlanPortLoopDetectAction This value is used to specify the action which needs to be taken once a loop is detected on a specific port. VlanBlock is not supported in VSP9000.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.3.1.14
rcVlanPortArpDetect Enable/disable Arp detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.15
rcVlanPortSpoofDetect Enable/disable spoof detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.16
rcVlanPortRemarking Enable/disable remarking on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.17
rcVlanPortClassificationSubnet Enable/disable Subnet based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.18
rcVlanPortClassificationProtocol Enable/disable Protocol based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.19
rcVlanPortClassificationPrec Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts subnet based vlans ahead of source mac vlans. Classification…	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.3.1.20
rcVlanPortVlanIdList This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.3.1.21
rcVlanPortClassificationSourceMac Enable/disable SourceMac based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.22
rcVlanPortPrivateVlanPortType The type of port associated with private VLAN. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or promiscuous. Setting the value to trunk will enab…	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.3.1.23
rcVlanPortUntaggedVlanIds This object is used to identify which VLANs this port is associated with as untagged.	RcVlanMask Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.3.3.1.24

rcVlanMacTable

table

.1.3.6.1.4.1.2272.1.3.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanMacTable'

Copy

A table used to maintain MAC addresses assigned 
to a particular VLAN by MAC address.

rcVlanMacEntry row .1.3.6.1.4.1.2272.1.3.4.1

Entry containing VLAN information regarding a
particular port.

Indexes

rcVlanClearMacRecordAddr

Column	Syntax	OID
rcVlanMacVlanId An unique index used to identify a VLAN (by MAC address) in the system.	Integer32	.1.3.6.1.4.1.2272.1.3.4.1.1
rcVlanMacAddr An unique index used to identify a MAC address assigned to a particular VLAN.	SNMPv2-TCMacAddress Constraints: range: 1-4094 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.4.1.2
rcVlanMacRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.4.1.3

rcVlanIgmpSnoopTable

table obsolete

.1.3.6.1.4.1.2272.1.3.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanIgmpSnoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanIgmpSnoopTable'

Copy

The (conceptual) table listing the IP multicast
groups for which there are members on a particular
interface on a particular VLAN (i.e., a list 
 known multicast receivers).
          
 A row is created by the system when it receives
 an IGMP Join messages on a port.

rcVlanIgmpSnoopEntry row .1.3.6.1.4.1.2272.1.3.6.1

An entry (row) in the rcVlanIgmpSnoopTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanIgmpSnoopVlanIdobsolete The VLAN for which this entry contains information.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.6.1.1
rcVlanIgmpSnoopIpAddressobsolete The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.6.1.2
rcVlanIgmpSnoopIfIndexobsolete The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received).	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.6.1.3
rcVlanIgmpSnoopMemberobsolete The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the Join message).	SNMPv2-SMIIpAddress Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.3.6.1.4
rcVlanIgmpSnoopExpirationobsolete The minimum amount of time remaining before this entry will be aged out.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.6.1.5
rcVlanIgmpSnoopTypeobsolete The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management.	Enumeration	.1.3.6.1.4.1.2272.1.3.6.1.6

rcVlanIgmpSnoopStaticTable

table obsolete

.1.3.6.1.4.1.2272.1.3.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanIgmpSnoopStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanIgmpSnoopStaticTable'

Copy

The (conceptual) table listing the statically-
defined IP multicast groups for which there are
members on a particular interface on a particular
VLAN.

rcVlanIgmpSnoopStaticEntry row .1.3.6.1.4.1.2272.1.3.7.1

An entry (row) in the rcVlanIgmpSnoopStaticTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanIgmpSnoopStaticVlanIdobsolete The VLAN for which this entry contains information.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.7.1.1
rcVlanIgmpSnoopStaticIpAddressobsolete The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.7.1.2
rcVlanIgmpSnoopStaticMemberPortsobsolete The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.7.1.3
rcVlanIgmpSnoopStaticRowStatusobsolete Used to create/delete entries in the rcVlanIgmpSnoopStaticTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.7.1.4
rcVlanIgmpSnoopStaticNotAllowedToJoinobsolete Not allowed to join	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.7.1.5

rcVlanIgmpSnoopAccessTable

table obsolete

.1.3.6.1.4.1.2272.1.3.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanIgmpSnoopAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanIgmpSnoopAccessTable'

Copy

Table used to specify which host(s) can send
and/or receive IP Multicast traffic.

rcVlanIgmpSnoopAccessEntry row .1.3.6.1.4.1.2272.1.3.8.1

An entry (row) in the rcVlanIgmpSnoopAccessTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanIgmpSnoopAccessVlanIdobsolete The VLAN for which this entry contains information.	RcVlanIdOrNone Enumerated Values: 1 unknown 2 up 3 down 4 notpresent Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.8.1.1
rcVlanIgmpSnoopAccessGrpAddrobsolete The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.8.1.2
rcVlanIgmpSnoopAccessHostAddrobsolete The IP address of a host for which this entry contains information.	SNMPv2-SMIIpAddress Enumerated Values: 1 unknown 2 regularSpeed 3 highSpeed Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.8.1.3
rcVlanIgmpSnoopAccessHostMaskobsolete The IP netmask of a host for which this entry contains information.	SNMPv2-SMIIpAddress Enumerated Values: 1 unknown 2 frontToBack 3 backToFront Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.8.1.4
rcVlanIgmpSnoopAccessModeobsolete Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both.	Enumerationr/w	.1.3.6.1.4.1.2272.1.3.8.1.5
rcVlanIgmpSnoopAccessRowStatusobsolete Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.8.1.6

rcVlanIgmpSnoopSenderTable

table obsolete

.1.3.6.1.4.1.2272.1.3.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanIgmpSnoopSenderTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanIgmpSnoopSenderTable'

Copy

The (conceptual) table listing the IP multicast 
groups for which there are members on a particular
interface on a particular VLAN (i.e., a list  
known multicast senders).  
          
A row is created by the system when it receives 
an IGMP Join messages on a port.

rcVlanIgmpSnoopSenderEntry row .1.3.6.1.4.1.2272.1.3.9.1

An entry (row) in the rcVlanIgmpSnoopSenderTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanIgmpSnoopSenderVlanIdobsolete The VLAN for which this entry contains information.	RcVlanIdOrNone Enumerated Values: 0 normal 1 fanFault 2 alarmThresholdExceeded Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.9.1.1
rcVlanIgmpSnoopSenderIpAddressobsolete The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.9.1.2
rcVlanIgmpSnoopSenderIfIndexobsolete The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received).	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.9.1.3
rcVlanIgmpSnoopSenderMemberobsolete The IP Address of the host sending the multicast traffic.	SNMPv2-SMIIpAddress Enumerated Values: 1 off 2 green 3 red 4 amber Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.9.1.4
rcVlanIgmpSnoopSenderActionobsolete Used to specify an action to perform on this group.	Enumerationr/w Enumerated Values: 1 off 2 green 3 red 4 amber	.1.3.6.1.4.1.2272.1.3.9.1.5

rcVlanLoopDetectedTable

table

.1.3.6.1.4.1.2272.1.3.10 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanLoopDetectedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanLoopDetectedTable'

Copy

A list of Vlans the port belongs to
and the 
corresponding loop detected status.

rcVlanLoopDetectedEntry row .1.3.6.1.4.1.2272.1.3.10.1

Loop-Detected Entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanLoopDetectedPortIndex Port Number.	Integer32	.1.3.6.1.4.1.2272.1.3.10.1.1
rcVlanLoopDetectedVlanId Gives the VlanId to which the port belongs.	Integer32	.1.3.6.1.4.1.2272.1.3.10.1.2
rcVlanLoopDetectedValue Gives the Loop Detected status of the port in a vlan.	Enumeration Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.3.10.1.3

rcVlanDsapSsapTable

table

.1.3.6.1.4.1.2272.1.3.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanDsapSsapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanDsapSsapTable'

Copy

A table used to maintain DSAP/SSAP values 
assigned to a sna802dot2 or userdefined vlan.

rcVlanDsapSsapEntry row .1.3.6.1.4.1.2272.1.3.11.1

An entry in the rcVlanDsapSsap table.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanDsapSsapVlanId A unique index to identify a vlan.	Integer32 Enumerated Values: 1 low 2 medium 3 high 4 hardware 5 error	.1.3.6.1.4.1.2272.1.3.11.1.1
rcVlanDsapSsapPid Values of DSAP/SSAP assigned to a particular vlan.	Integer32 Enumerated Values: 1 ok 2 faulty	.1.3.6.1.4.1.2272.1.3.11.1.2
rcVlanDsapSsapRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.11.1.3

rcVlanNewLoopDetectedTable

table

.1.3.6.1.4.1.2272.1.3.12 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanNewLoopDetectedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanNewLoopDetectedTable'

Copy

A list of Vlans the port belongs to and the 
corresponding loop detected status.

rcVlanNewLoopDetectedEntry row .1.3.6.1.4.1.2272.1.3.12.1

Loop-Detected Entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanNewLoopDetectedPortIndex Port Number.	InterfaceIndex Enumerated Values: 1 unknown 2 empty 3 up 4 down Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.12.1.1
rcVlanNewLoopDetectedVlanId Gives the VlanId to which the port belongs.	Integer32	.1.3.6.1.4.1.2272.1.3.12.1.2
rcVlanNewLoopDetectedMac Mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.12.1.3
rcVlanNewLoopDetectedAction This value is used to specify the action which needs to be taken once a loop is detected on a specific port.	Enumeration Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.3.12.1.4
rcVlanNewLoopDetectedSmltRemote A MAC address indicate for remote learnt, either local or remote.	SNMPv2-TCTruthValue Enumerated Values: 0 unknown 1 ac 2 dc 3 dualAc 277876736 dc8005 278798592 poe 278802688 poe1400WPS Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.12.1.5

rcVlanPortCfmMepTable

table

.1.3.6.1.4.1.2272.1.3.13 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanPortCfmMepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanPortCfmMepTable'

Copy

A table used to maintain CFM MEP 
assigned to the port in a vlan

rcVlanPortCfmMepEntry row .1.3.6.1.4.1.2272.1.3.13.1

An entry in the rcVlanPortCfmMep table.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanPortCfmMepVlanId A unique index to identify a vlan.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.3.13.1.1
rcVlanPortCfmMepPort A unique index to identify a port interface in a Vlan.	InterfaceIndex Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.3.13.1.2
rcVlanPortCfmMepMepList List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist of <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... Each mep…	OctetStringr/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.3.13.1.3
rcVlanPortCfmMepNumOfMep Used to indicate the number of Meps is assigned to this entry	SNMPv2-SMIInteger32 Enumerated Values: 0 unknown 1 low110v 2 high220v 3 minus48v 4 ac110vOr220v 5 dc Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.13.1.4
rcVlanPortCfmMepRowStatus Row Create attibute. For perfomace and efficience, rcVlanPortCfmMepMepList is required for creation. If any Mep is added, entry would be created. If all Mep are removed, entry would be deleted	SNMPv2-TCRowStatusr/w Enumerated Values: 0 unknown 1 low110v 2 high220v 3 minus48v 4 ac110vOr220v 5 dc Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.13.1.5

rcVlanPortCfmMipTable

table

.1.3.6.1.4.1.2272.1.3.14 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanPortCfmMipTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanPortCfmMipTable'

Copy

A table used to maintain CFM MIP 
assigned to the port in a vlan

rcVlanPortCfmMipEntry row .1.3.6.1.4.1.2272.1.3.14.1

An entry in the rcVlanPortCfmMip table.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanPortCfmMipVlanId A unique index to identify a vlan.	Integer32 Enumerated Values: 1 frontToback 2 backTofront 3 unknown	.1.3.6.1.4.1.2272.1.3.14.1.1
rcVlanPortCfmMipPort A unique index to identify a port interface in a Vlan.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.14.1.2
rcVlanPortCfmMipMipList List of Mips assigned to this entry. A mip is consist of <md>.<mip_id>. Domain Name and Mip Id is separated by '.' A list of mip is consist of <md1>.<mipid1>,<md2>.<mipid2>,... Each mip is separated by ','. Maximum …	OctetStringr/w	.1.3.6.1.4.1.2272.1.3.14.1.3
rcVlanPortCfmMipNumOfMip Used to indicate the number of Mips is assigned to this entry	SNMPv2-SMIInteger32 Constraints: range: 1-26	.1.3.6.1.4.1.2272.1.3.14.1.4
rcVlanPortCfmMipRowStatus Row Create attibute. For perfomace and efficience, rcVlanPortCfmMipMipList is required for creation. If any Mip is added, entry would be created. If all Mip are removed, entry would be deleted	SNMPv2-TCRowStatusr/w Enumerated Values: 1 other 2 rcCPU 3 rc8x100BaseTX 4 rc8x100BaseT2 5 rc8x100BaseF 6 rc16x100BaseTX 12 rc8x100BaseTXWG 13 rc16x100BaseTXWG 14 rc4x100BaseFWG 15 rc12x100BaseTXWG 16 rc12x100BaseFBB 17 rc8x100BaseFWG 18 rc12x100BaseTX-2x100BaseFBB 19 rc2x155BaseFBB 20 rc4x155BaseFBB 21 rc16x100BaseFBB 22 rc14x100BaseTX-2x100BaseFBB 23 rc8x10BaseFBB 24 rc4xOC3 25 rc1xOC12 26 rcRMON 27 rc1xOC12POSBaseMMF 28 rc1xOC12POSBaseSMF 1025 rc1x1000BaseSXWG 1026 rc2x1000BaseSXWG 1028 rc4x1000BaseSXWG 1041 rc1x1000BaseSXBB 1042 rc2x1000BaseSXBB 1153 rc1x1000BaseLXWG 1154 rc2x1000BaseLXWG 1169 rc1x1000BaseLXBB 1170 rc2x1000BaseLXBB 1282 rc2x1000BaseXDWG 1298 rc2x1000BaseXDBB 1537 rc1x1000BaseSXRWG 1538 rc2x1000BaseSXRWG 1553 rc1x1000BaseSXRBB 1554 rc2x1000BaseSXRBB 1665 rc1x1000BaseLXRWG 1666 rc2x1000BaseLXRWG 1681 rc1x1000BaseLXRBB 1682 rc2x1000BaseLXRBB 1073873665 cbCP-CSC 1075708672 cbSF3200 1075712768 cbSF9600 1075716864 cbSF9610 1075970864 cb48x1000BaseTX 1075974960 cb48x1000BaseTXPOE 1077044016 cb48x1000SFP 1077109528 cb24x10GBaseSFP 1077109552 cb48x10GBaseSFP 1084097280 cbACPowerSupply 1084130048 cbACPowerPlusSupply 1085145856 cbCPFanTray 1085149952 cbIOFanTray 1085154048 cbFanTray 1085158144 cbHSFanTray 1090388736 cbMidplane-28 1090396928 cbMidplaneSapphire 1091437312 cbAUX 1144152832 rofLoadBoard 1144152880 rof48x1000SFP 1144218384 rof16x10GBaseSFP 1144218416 rof48x10GBaseSFP 1144283920 rof4x40GBaseSFP 1144283952 rof12x40GBaseSFP 1231224882 vsp4k4450GSX 1231228978 vsp4k4450GSXPWRPLUS 1232273458 vsp4k4850GTS 1232277554 vsp4k4850GTSPWRPLUS 1232279602 vsp4k4450GTXHTPWRPLUS 1298379288 vsp8k8424XS 1298407466 vsp8k8242XSQ Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.14.1.5

rcVlanExtFilterSvcTable

table

.1.3.6.1.4.1.2272.1.3.15 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanExtFilterSvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanExtFilterSvcTable'

Copy

Extended filtering services per port per Vlans are
defined in this table

rcVlanExtFilterSvcEntry row .1.3.6.1.4.1.2272.1.3.15.1

Used to indicate the extended filtering services.
Extended filtering services are per port per Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanExtFilterSvcVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	Integer32 Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.2272.1.3.15.1.1
rcVlanExtFilterSvcFwdAllPorts Contains port list that are in ForwardAll mode.	PortSetr/w Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.15.1.2
rcVlanExtFilterSvcFwdUnregPorts Contains port list that are in Forward Unregistered mode.	PortSetr/w Enumerated Values: 1 none 2 modem28kbs 3 flash2meg 4 flash4meg Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.15.1.3
rcVlanExtFilterSvcFilterUnregPorts Contains port list that are in Filter Unregistered mode.	PortSetr/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.3.15.1.4

rcVlanPortSpoofDetectTable

table

.1.3.6.1.4.1.2272.1.3.16 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanPortSpoofDetectTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanPortSpoofDetectTable'

Copy

Table containing spoof-detect block entries.

rcVlanPortSpoofDetectEntry row .1.3.6.1.4.1.2272.1.3.16.1

This entry, which contains port index, VLAN ID, IP address and
MAC address, is used to indicate which MAC address is starting IP-Spoof
attack and which gateway IP address is under attack.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanPortSpoofDetectIndex The auxiliary variable for identifying instances of the columnar objects in the spoof detect table.	SNMPv2-SMIUnsigned32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.16.1.1
rcVlanPortSpoofDetectSpoofedIpAddressType IP address type of address under spoof attack.	INET-ADDRESS-MIBInetAddressType Constraints: range: 0-8 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.3.16.1.2
rcVlanPortSpoofDetectSpoofedIpAddress IP address that has been detected under spoof attack.	INET-ADDRESS-MIBInetAddress Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.16.1.3
rcVlanPortSpoofDetectSpoofedMacAddress MAC address that has sent out spoofing ARP.	SNMPv2-TCMacAddress Constraints: range: 0-8 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.16.1.4
rcVlanPortSpoofDetectPort Port index that has enabled spoof-detect.	SNMPv2-SMIUnsigned32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.16.1.5
rcVlanPortSpoofDetectVlanId VLAN ID that has been detected under spoof attack.	SNMPv2-SMIUnsigned32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.16.1.6

rcVlanClearMacRecordTable

table

.1.3.6.1.4.1.2272.1.3.17 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanClearMacRecordTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanClearMacRecordTable'

Copy

Table used to clear a Vlan MAC Record.

rcVlanClearMacRecordEntry row .1.3.6.1.4.1.2272.1.3.17.1

Vlan Clear Mac Record Table Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanClearMacRecordAddr Mac Address that needs to be cleared.	SNMPv2-TCMacAddress Constraints: range: 0-8 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.17.1.1
rcVlanClearMacRecordVlanId Vlan Id where the Mac record has to be cleared.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.17.1.2
rcVlanClearMacRecordAllVlanIds When set to true, this will clear the MAC record on all the Vlan Ids it exists.	SNMPv2-TCTruthValuer/w Constraints: range: 0-8 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.17.1.3
rcVlanClearMacRecordForceDelete By default, when ForceDelete is set to false, MAC record will not be cleared if an ARP record is associated with this Mac Address. If ForceDelete is set to True, MAC record will be removed even when an ARP is associ…	SNMPv2-TCTruthValuer/w Constraints: range: 0-8 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.17.1.4
rcVlanClearMacRecordLCForceDelete By default, when LCForceDelete (Line Card Force Delete) is set to false, if the MAC record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will be …	SNMPv2-TCTruthValuer/w Constraints: range: 0-8 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.17.1.5

rcVlanNameTable

table

.1.3.6.1.4.1.2272.1.3.18 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanNameTable'

Copy

A table that can be used to map the Virtual LAN Id to
IfIndex and Name for display.  It is informational only.

rcVlanNameEntry row .1.3.6.1.4.1.2272.1.3.18.1

Each entry has mapping information for a
particular Virtual LAN. This in intended for display
purposes only.

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanNameVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.18.1.1
rcVlanNameVlanName The assigned name for this VLAN.	OctetString	.1.3.6.1.4.1.2272.1.3.18.1.2
rcVlanNameIfIndex When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and will be set to zero.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.18.1.3

rcVlanPortSpoofMacTable

table

.1.3.6.1.4.1.2272.1.3.19 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlanPortSpoofMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlanPortSpoofMacTable'

Copy

A table contains a list of Spoof blocked
MAC address information.

rcVlanPortSpoofMacEntry row .1.3.6.1.4.1.2272.1.3.19.1

Entry containing a spoof blocked MAC address

Indexes

No indexes recorded

Column	Syntax	OID
rcVlanPortSpoofMacPortNum Port interface number of the Spoof detect is enabled. Spoof mac is detected	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.3.19.1.1
rcVlanPortSpoofMacVlanId A vlan entry which the port intreface belong to. And the spoof MAC is detected	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.3.19.1.2
rcVlanPortSpoofMacIpAddress A Local Ip address on this interface	SNMPv2-SMIIpAddress Enumerated Values: 1 none 2 flushMacFdb 3 flushArp 4 flushIp 5 flushAll 6 triggerRipUpdate 7 clearLoopDetectAlarm Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.19.1.3
rcVlanPortSpoofMacMacAddress A spoofing Mac address that is detected in this interface	SNMPv2-TCMacAddress Enumerated Values: 1 none 2 inProgress 3 success 4 fail Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.19.1.4
rcVlanPortSpoofMacClearMac Clear/delete this spoof detect mac entry when it is true. It always return false when query	SNMPv2-TCTruthValuer/w Enumerated Values: 1 left 2 right 3 other Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.19.1.5

rcChasFanTable

table

.1.3.6.1.4.1.2272.1.4.7.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasFanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasFanTable'

Copy

This table contains information about Fans

rcChasFanEntry row .1.3.6.1.4.1.2272.1.4.7.1.1

Contains information regarding a Fan Unit

Indexes

No indexes recorded

Column	Syntax	OID
rcChasFanId The chassis fan Id.	Integer32	.1.3.6.1.4.1.2272.1.4.7.1.1.1
rcChasFanOperStatus Actual status of the Fan: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated.	Enumeration Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.7.1.1.2
rcChasFanAmbientTemperature Used to indicate the temperature in celsius of the air entering the fan.	SNMPv2-SMIGauge32 Enumerated Values: 1 half 2 full Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.7.1.1.3
rcChasFanType Type of the Fan: - unknown(1) - type can not be determined. - regularSpeed(2) - regular speed fan is present. - highSpeed(3) - high speed fan is present.	Enumeration Enumerated Values: 0 none 1 mbps10 2 mbps100 3 mbps1000 4 mbps10000 5 mbps40000 6 mbps100000 7 mbps25000	.1.3.6.1.4.1.2272.1.4.7.1.1.4
rcChasFanFlowType Direction of the Fan Flow: - unknown(1) - Flow can not be determined. - fronttoback(2) - Front to back flow. - backtofront(3) - Back to front flow.	Enumeration	.1.3.6.1.4.1.2272.1.4.7.1.1.5

rcChasFanZoneTable

table

.1.3.6.1.4.1.2272.1.4.7.2 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasFanZoneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasFanZoneTable'

Copy

Table for the zones available on the chassis

rcChasFanZoneEntry row .1.3.6.1.4.1.2272.1.4.7.2.1

Contains information regarding a zone unit

Indexes

No indexes recorded

Column	Syntax	OID
rcChasFanZoneType Type of the fan zone.	Enumeration	.1.3.6.1.4.1.2272.1.4.7.2.1.1
rcChasFanZoneMode Functional mode of the fan zone.	Enumeration	.1.3.6.1.4.1.2272.1.4.7.2.1.2
rcChasFanZoneModeStatus Bit set indicates the alarm type(s)	Bits	.1.3.6.1.4.1.2272.1.4.7.2.1.3
rcChasFanZoneAlarmTimer Alarm timer indicates the remaining time before system checks and shutdown module when fan is in the alarm state. Zero means the fan i snot in an alarm state	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.7.2.1.4
rcChasFanZoneTemperature Highest temperature measured in celsius degree from all the sensors (inlet and outlet) in the zone	SNMPv2-SMIGauge32 Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.7.2.1.5
rcChasFanZoneTray1LedColor Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray: more than one fans in a tray are not opertional. …	Enumeration	.1.3.6.1.4.1.2272.1.4.7.2.1.6
rcChasFanZoneTray2LedColor Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray: more than one fans in a tray are not opertional. …	Enumeration Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.2272.1.4.7.2.1.7
rcChasFanZoneFPGATemperature Highest FPGA temperature measured in celsius degree from all the FPGA sensors in the zone. FPGA sensors are only available on the RoF cards. Hence this is applicable only for the front zone. A value of 0 for this mib …	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.7.2.1.8
rcChasFanZoneFATemperature Highest FA temperature measured in celsius degree from all the FA sensors in the zone. FA sensors are only available on the RoF cards. Hence this is applicable only for the front zone. A value of 0 for this mib object…	celsiusSNMPv2-SMIInteger32 Enumerated Values: 0 none 1 access 2 core Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.7.2.1.9

rcChasFanInfoTable

table

.1.3.6.1.4.1.2272.1.4.7.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasFanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasFanInfoTable'

Copy

This table contains information for 
all the fans on the chassis

rcChasFanInfoEntry row .1.3.6.1.4.1.2272.1.4.7.3.1

Contains information regarding a fan unit

Indexes

No indexes recorded

Column	Syntax	OID
rcChasFanInfoTray Number of trays per zone in chassis	Integer32 Constraints: range: 0-42	.1.3.6.1.4.1.2272.1.4.7.3.1.1
rcChasFanInfoFan Number of fans per tray	Integer32	.1.3.6.1.4.1.2272.1.4.7.3.1.2
rcChasFanInfoExpectedSpeed The administrative setting for the fan speed low: Low speed set by software medium: Medium speed set by software high: High speed set by software hardware: Speed controlled by hardware	Enumeration Enumerated Values: 0 none 1 wan 2 lan	.1.3.6.1.4.1.2272.1.4.7.3.1.3
rcChasFanInfoOperSpeed Actual speed of the fan	Enumeration Enumerated Values: 0 none 1 sonet 2 sdh	.1.3.6.1.4.1.2272.1.4.7.3.1.4
rcChasFanInfoStatus The operational status of the fan. Details below: ok(1): Fan operating under normal condition(s) faulty(2): Fan not operating as expected	Enumeration	.1.3.6.1.4.1.2272.1.4.7.3.1.5

rcChasPowerSupplyTable

table

.1.3.6.1.4.1.2272.1.4.8.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasPowerSupplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasPowerSupplyTable'

Copy

This table contains information about power 
supplies.

rcChasPowerSupplyEntry row .1.3.6.1.4.1.2272.1.4.8.1.1

Contains information regarding a power supply
unit.

Indexes

No indexes recorded

Column	Syntax	OID
rcChasPowerSupplyId The power supply Id.	Integer32 Enumerated Values: 0 none 1 transparent 2 switched	.1.3.6.1.4.1.2272.1.4.8.1.1.1
rcChasPowerSupplyOperStatus Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power. - down(4) - present, but failure indicated.	Enumeration	.1.3.6.1.4.1.2272.1.4.8.1.1.2

rcChasPowerSupplyDetailTable

table

.1.3.6.1.4.1.2272.1.4.8.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasPowerSupplyDetailTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasPowerSupplyDetailTable'

Copy

This table contains detailed information about
power supplies.

rcChasPowerSupplyDetailEntry row .1.3.6.1.4.1.2272.1.4.8.2.1

Contains detailed info regarding a power supply
unit.

Indexes

No indexes recorded

Column	Syntax	OID
rcChasPowerSupplyDetailId The power supply Id.	Integer32	.1.3.6.1.4.1.2272.1.4.8.2.1.1
rcChasPowerSupplyDetailType The power supply type.	Enumeration	.1.3.6.1.4.1.2272.1.4.8.2.1.2
rcChasPowerSupplyDetailSerialNumber The power supply serial number.	OctetString Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.4.8.2.1.3
rcChasPowerSupplyDetailHardwareRevision The hardware revision of the power supply.	OctetString Constraints: range: 4-16000	.1.3.6.1.4.1.2272.1.4.8.2.1.4
rcChasPowerSupplyDetailPartNumber The power supply part number.	OctetString	.1.3.6.1.4.1.2272.1.4.8.2.1.5
rcChasPowerSupplyDetailDescription The detail description of power supply.	OctetString	.1.3.6.1.4.1.2272.1.4.8.2.1.6
rcChasPowerSupplyDetailPsePower The nominal power of the PSE expressed in Watts.	Integer32	.1.3.6.1.4.1.2272.1.4.8.2.1.7
rcChasPowerSupplyDetailInputLineVoltage The power supply Input Line voltage.	Enumeration Enumerated Values: 1 vctNotCapable 2 vctCapable	.1.3.6.1.4.1.2272.1.4.8.2.1.8
rcChasPowerSupplyDetailOperLineVoltage The power supply Line voltage considered for Power Management calculation.	Enumeration	.1.3.6.1.4.1.2272.1.4.8.2.1.9
rcChasPowerSupplyDetailOutputWatts The output power of this power supply	SNMPv2-SMIInteger32 Constraints: range: 1-32768	.1.3.6.1.4.1.2272.1.4.8.2.1.10
rcChasPowerSupplyDetailDualAcInput The dual input power supply has two input AC lines. This Mib defines which of those AC lines are supplying power. For a single input power supply this Mib will be set to notApplicable(5)	Enumeration Constraints: range: 1-3600	.1.3.6.1.4.1.2272.1.4.8.2.1.11
rcChasPowerSupplyFanFlowType The power supply Fan Flow Type.	Enumeration	.1.3.6.1.4.1.2272.1.4.8.2.1.12

rcCardTable

table

.1.3.6.1.4.1.2272.1.4.9.1 · 1 row entry · 25 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCardTable'

Copy

A table that contains information about the 
cards in this chassis.  For those slots that 
do not contain a physical card, the table may 
 be implemented to contain a conceptual row 
with the type of physical module set to 
 'chasCardEmpty', or it may be implemented to 
 have no conceptual row instance.

rcCardEntry row .1.3.6.1.4.1.2272.1.4.9.1.1

Card attributes

Indexes

No indexes recorded

Column	Syntax	OID
rcCardIndex A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the value of rcChasNumSlots	Integer32	.1.3.6.1.4.1.2272.1.4.9.1.1.1
rcCardType Used to indicate the card type. The value returned is defined by the description in rc2kCardTable.	Enumeration	.1.3.6.1.4.1.2272.1.4.9.1.1.2
rcCardSerialNumberobsolete Unique serial number for this card.	OctetString Enumerated Values: 0 advertise10Half 1 advertise10Full 2 advertise100Half 3 advertise100Full 4 advertise1000Half 5 advertise1000Full 6 advertiseMacPause 7 advertiseAsymPause 8 advertiseNone 9 advertise10000Full 10 default	.1.3.6.1.4.1.2272.1.4.9.1.1.3
rcCardHardwareRevisionobsolete Hardware Version	OctetString Enumerated Values: 0 advertise10Half 1 advertise10Full 2 advertise100Half 3 advertise100Full 4 advertise1000Half 5 advertise1000Full 6 advertiseMacPause 7 advertiseAsymPause	.1.3.6.1.4.1.2272.1.4.9.1.1.4
rcCardAdminStatusobsolete Used to indicate the administrative status of this card	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.9.1.1.5
rcCardOperStatusobsolete Used to indicate the operational status of this card.	Enumeration Enumerated Values: 1 none 2 softDown 3 hardDown	.1.3.6.1.4.1.2272.1.4.9.1.1.6
rcCardPCMCIATypeobsolete Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none.	Enumeration Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.4.9.1.1.7
rcCardPartNumberobsolete Card Part Number	OctetString Constraints: range: 0-0 range: 64-100000000	.1.3.6.1.4.1.2272.1.4.9.1.1.8
rcCardOxateCpld Oxate CPLD version for CP card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.9
rcCardOxideFpga Oxide FGPA version for CP card	OctetString Constraints: range: 0-6553500	.1.3.6.1.4.1.2272.1.4.9.1.1.10
rcCardCatskillFpga Catskill FPGA version for CP card	OctetString Constraints: range: 0-6553500	.1.3.6.1.4.1.2272.1.4.9.1.1.11
rcCardQE QE version for CP card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.12
rcCardK2Fpga K2 FPGA version for IO card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.13
rcCardIoDateDC IO Date DC CPLD for IO card	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.4.9.1.1.14
rcCardIoDateBB IO Date BaseBoard CPLD for IO card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.15
rcCardIoPimCpld IO PIM CPLD for IO card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.16
rcCardLed0Cpld LED0 CPLD for IO card	OctetString Constraints: range: 1000-100000	.1.3.6.1.4.1.2272.1.4.9.1.1.17
rcCardLed1Cpld LED1 CPLD for IO card	OctetString Constraints: range: 1000-100000	.1.3.6.1.4.1.2272.1.4.9.1.1.18
rcCardZagrosFpga Zagros FPGA for IO card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.19
rcCardRsp RSP for IO card	OctetString Constraints: range: 0-408	.1.3.6.1.4.1.2272.1.4.9.1.1.20
rcCardBcmMac BCM Mac for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.21
rcCardPhosphideFpga Phosphide FPGA for IO card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.22
rcCardSulfideFpga Sulfide FPGA for IO card	OctetString Constraints: range: 0-4093	.1.3.6.1.4.1.2272.1.4.9.1.1.23
rcCardFluorateCpld Fluorate Cpld for SF card	OctetString	.1.3.6.1.4.1.2272.1.4.9.1.1.24
rcCardBme BME for SF card	OctetString Enumerated Values: 0 none 1 line 2 internal	.1.3.6.1.4.1.2272.1.4.9.1.1.25

rcPortTable

table

.1.3.6.1.4.1.2272.1.4.10.1 · 1 row entry · 116 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortTable'

Copy

Port table

rcPortEntry row .1.3.6.1.4.1.2272.1.4.10.1.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.4.10.1.1.1
rcPortType Port type	Enumeration Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.4.10.1.1.2
rcPortConnectorType Type of connector installed on this port.	Enumeration Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.4.10.1.1.3
rcPortPerformRoutingobsolete Indicate whether this port should perform routing	SNMPv2-TCTruthValuer/w Constraints: range: 0-89 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.4
rcPortHighPriorityobsolete Indicate whether this port should be treated with high priority	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.5
rcPortAction Port related actions.	Enumerationr/w Enumerated Values: 1 normal 2 silent 3 uni	.1.3.6.1.4.1.2272.1.4.10.1.1.6
rcPortResult Result from the last Vlan action.	Enumeration Constraints: range: 0-57	.1.3.6.1.4.1.2272.1.4.10.1.1.7
rcPortPrimaryConnector For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up.	Enumerationr/w Constraints: range: 1518-9600	.1.3.6.1.4.1.2272.1.4.10.1.1.8
rcPortActiveConnector For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.9
rcPortBackupConnectorStatus Indicate the status of the link attached to the back-up (non-active) connector.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.10
rcPortAutoNegotiate Indicate whether this port enabled for auto negotiations or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.11
rcPortAdminDuplex Indicates the port duplex type	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.4.10.1.1.12
rcPortOperDuplex Indicate this port's current duplex value.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.13
rcPortAdminSpeed Indicate this port's speed.	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.14
rcPortOperSpeed Indicate this port's current speed value.	SNMPv2-SMIInteger32 Constraints: range: 0-0 range: 20-1000	.1.3.6.1.4.1.2272.1.4.10.1.1.15
rcPortMltId Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.16
rcPortLocked Indicate whether this port is locked.	SNMPv2-TCTruthValue Constraints: range: 0-0 range: 20-1000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.17
rcPortAutoNegotiationSupported Indicate whether this port can support auto-negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.18
rcPortSingleRoutablePort Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.19
rcPortUnknownMacDiscard If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For examp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.20
rcPortNumStateTransition # state transitions.	SNMPv2-SMICounter32 Enumerated Values: 1 esm8x1000Base 2 pr48x1000BaseTX 3 pr30x1000BaseSXBB 4 pr3x10GBaseGbic 5 pr3x10GBaseXZW 6 prPR48x1000BaseGBRS 7 prPR48x1000BaseGTRS 8 prPR12X10GBaseXLRS 9 prPR34xXGRS 10 prPR48x1000BaseGXRS 11 prPR30x1000BaseGBRS 12 prPR6X10GBaseXLRS 13 prPR26xXGRS 14 other Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.21
rcPortUserPriorityobsolete User priority level.	Enumerationr/w Constraints: range: 0-0 range: 64-40000000	.1.3.6.1.4.1.2272.1.4.10.1.1.22
rcPortAllowOversizeFrameobsolete Used to specify whether over-size frames should be processed or dropped.	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 64-40000000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.23
rcPortQosLevel Used to specify the Qos level packets, carried on this port, should be processed with.	Enumerationr/w Constraints: range: 1000-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.30
rcPortDiffServEnable Used to enable/disable the Differentiated Service feature on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.31
rcPortDiffServType Used to specify the Differentiated Service type for this port.	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.32
rcPortDiffServIeee8021POverrideEnableobsolete Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.33
rcPortVendorDescr Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.	OctetString Enumerated Values: 1 none 2 cpLimit 3 macFlap 4 linkFlap 5 telnet 6 rLogin 7 console 8 ssh 9 modem 10 snmp 11 fdLimit 12 vlacp 13 slpp 14 smlt 15 lossless 16 invalidLossCfg 17 dpHeartBeat 18 ddmStatus 19 dupQsfpSerNum 20 bpduGuard	.1.3.6.1.4.1.2272.1.4.10.1.1.34
rcPortName This port's name.	OctetStringr/w Enumerated Values: 1 auto 2 forceAuto 3 normal 4 xover	.1.3.6.1.4.1.2272.1.4.10.1.1.35
rcPortOctapidId The octapid id of the mirrored port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.36
rcPortWan Indicatie this port's current WAN/LAN mode. Valid for 10 GE only	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.37
rcPortTransport Indicatie this port's current tranport layer. Valid for 10 GE only	Enumerationr/w Constraints: range: 0-0 range: 10-65535	.1.3.6.1.4.1.2272.1.4.10.1.1.38
rcPortMultimediaFilterEnable Used to enable/disable the Telephony device selected on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.39
rcPortMultimediaDevSelection Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable	SNMPv2-TCDisplayStringr/w Enumerated Values: 1 locked 2 unlocked 3 notApplicable Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.4.10.1.1.40
rcPortServiceType Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VPN service and ip is used to perform the IP routing and mpls …	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.41
rcPortMode The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched.	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.42
rcPortAdminRouting Indicate whether the port is routable.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.43
rcPortOperRouting The status of the port whether is routable.	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.44
rcPortPid The pid of the mirrored port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.45
rcPortIeee8021POverrideEnable Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p value from a tagged frame may not be honored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.46
rcPortShaperEnable Used to enable/disable shaper on the port.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 tx 2 rx 3 both 4 rxFilter 5 txFilter 6 bothFilter Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.47
rcPortShaperMaxRate Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.4.10.1.1.48
rcPortShaperBurstSize Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.4.10.1.1.49
rcPortCpLimitShutDown A TRUE value indicates if CP Limit shut down the interface.	SNMPv2-TCTruthValue Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.50
rcPortHighSecureEnable Enable/Disable high secure feature.	SNMPv2-TCTruthValuer/w Constraints: range: 0-256 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.51
rcPortTlsPriorityOverride Enable/Disable tls port priority override feature.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.52
rcPortVctAbility If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then the hardware cannot do the VCT test regardless of the setti…	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.53
rcPortVctAdminStatus Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, even if the port hardware is capable of doing it. If this vari…	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.54
rcPortMrouteStrLimit maximum number of multicast streams that are allowed to ingress to CPU through this port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.1.1.55
rcPortMrouteStrTimerCheck sampling period to check number of multicast streams that has ingressed CPU through this port in seconds.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.1.1.56
rcPortMrouteStrLimitEnable enable or disable mroute stream limit on port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.57
rcPortUpdateDynamicMacQosLevel It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is set to TRUE, qos level for all dynamic learned mac addresses…	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.58
rcPortVplsDualHoming The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI.	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.1.1.59
rcPortVplsMgmtVlan Management Vlan is configured on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.60
rcPortTlsManagedBySp True/False tls devices on port Managed By Service Provider.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 critical 2 high 3 low Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.61
rcPortAutoNegAd This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex adv…	Bitsr/w Enumerated Values: 1 p802dot3af 2 p802dot3afAndLegacy	.1.3.6.1.4.1.2272.1.4.10.1.1.62
rcPortAutoNegAdCapability This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-negotiation. Bit 7 tells if a port supports pause frame capab…	Bits Constraints: range: 37-800	.1.3.6.1.4.1.2272.1.4.10.1.1.63
rcPortAutoRecoverPort enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.64
rcPortExtCplimitConf Indicates the port configuration for extended CP-LIMIT	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.65
rcPortExtCplimitUtilRate Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.66
rcPortEgressRateLimit Egress Rate Limit. Different platform has different valid range. For VOSS product, Valid range is 1000..100000000, 0 means disabled. The maximum value is based on the port capability. Value of qos if-shaper	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.67
rcPortEgressRateLimitState Used to enable/disable shape/egress-rate-limit functionality. WHen it is disabled, rcPortEgressRateLimit will be set to 0	EnableValuer/w Constraints: range: 3-16 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.68
rcPortBpduFilteringTimerCountobsolete The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled.	Integer32	.1.3.6.1.4.1.2272.1.4.10.1.1.69
rcPortBpduFilteringTimeoutobsolete The time the port will be disabled when a BPDU is received when BPDU filtering is enabled.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.70
rcPortBpduFilteringAdminEnabledobsolete Used to enable/disable BPDU filtering.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.71
rcPortBpduFilteringOperEnabledobsolete Indicates whether BPDU filtering is actually enabled or disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.72
rcPortQinqEtherType The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Otherwise, it would be ignored	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.73
rcPortTrustDscp Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MIB object is applicable to ports in 8348GTX so that higher p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.74
rcPortCpLimitEnable Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for the specified port.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.75
rcPortCpMulticastLimit Used to limit Multicast traffic on the specified port. Sets the limit in packets per second.	Integer32r/w Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.76
rcPortCpBroadcastLimit Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second.	Integer32r/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.1.1.77
rcPortSmartAutoNegotiate This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has autonegotiation enabled). This object, when supported, works i…	SNMPv2-TCTruthValuer/w Constraints: range: 1-10 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.78
rcPortMepList List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist of <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... Each mep…	OctetStringr/w Constraints: range: 200-2000	.1.3.6.1.4.1.2272.1.4.10.1.1.79
rcPortNumOfMep Used to indicate the number of Meps is assigned to this entry	Integer32 Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.80
rcPortAdacStatus If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN.	SNMPv2-TCTruthValuer/w Constraints: range: 10000-30000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.81
rcPortPvid A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.1.1.82
rcPortTdp This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the TDP packet to go out on the port, topology should be enabled both at the port and box lev…	EnableValuer/w Constraints: range: 200-2000 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.83
rcPortClockSource Indicates this port's current WAN clock source. Valid for 10 GE WAN only	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.84
rcPortIngressRateLimit Limits the amount of traffic from this Ingress port. Value of qos if-rate-limite setting	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.85
rcPortIngressRateLimitState Used to enable/disable police/ingress-rate-limit functionality.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.86
rcPortVrfIdList The set of VRF ids to which this port belongs.	OctetString	.1.3.6.1.4.1.2272.1.4.10.1.1.87
rcPortCfmVid CFM default port vid	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.88
rcPortUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w Constraints: range: 10-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.89
rcPortUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.1.1.90
rcPortClearCfmStats To clear the port counter	SNMPv2-TCTruthValuer/w Enumerated Values: 1 short 2 long Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.91
rcPortInterfaceType This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to sil…	Enumerationr/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.1.1.92
rcPortCfmControlMep MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.'	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.93
rcPortMtu Port Mtu	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.94
rcPortMtuState Used to enable/disable Port Mtu functionality.	EnableValuer/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.4.10.1.1.95
rcPortVrfNameList The set of VRF names to which this port belongs.	OctetString	.1.3.6.1.4.1.2272.1.4.10.1.1.96
rcPortBrouterVrfId Gives the VRF Id for this Brouter port.	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.4.10.1.1.97
rcPortBrouterVrfName Gives the VRF Name for this Brouter port.	OctetString Constraints: range: 3-30	.1.3.6.1.4.1.2272.1.4.10.1.1.98
rcPortVrfCount The total number of VRFs this port is associated to.	SNMPv2-SMICounter32 Constraints: range: 10-600	.1.3.6.1.4.1.2272.1.4.10.1.1.99
rcPortCtrlPktDropLimitEnable Used to enable/disable Control Packets Drop Rate Limiter functionality.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.100
rcPortCtrlPktDropLimit Indicates the Control Packet drop rate limit value	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.101
rcPortCtrlPktShutdownLimitEnable Used to enable/disable Control Packets Shutdown Rate Limiter functionality.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.102
rcPortCtrlPktShutdownLimit Indicates the Control Packet shutdown rate Limit value	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.103
rcPortCtrlPktShutdownRtExceeded Indicates if the Shutdown rate has been exceeded on the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.104
rcPortCtrlPktDropRtExceeded Indicates if the Drop rate has been exceeded on the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.105
rcPortDhcpOption82SubscriberId This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then sub-option 6 is not included in option 82	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.4.10.1.1.106
rcPortServiceCardType Port Hardware type, which includes PowerRanger, ESM port and other	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.107
rcPortIngressRatePeak Peak rate limit for this port. 0 means disable	Integer32r/w Enumerated Values: 1 source 2 termination	.1.3.6.1.4.1.2272.1.4.10.1.1.108
rcPortIngressRateSvc Service rate limit for this port. 0 mean disable	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.109
rcPortCpLimitPktRate Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.1.1.110
rcPortCpLimitShutDownEnable Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.111
rcPortRmonEnable Used to set Remote Monitoring enable/disable	SNMPv2-TCTruthValuer/w Constraints: range: 0-2000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.112
rcPortIpsecEnabledeprecated Used to set IPSEC enable/disable. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated	SNMPv2-TCTruthValuer/w Constraints: range: 4096-4096 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.113
rcPortShutdownReason The port shutdown can happen due to many reason. It indicates the reason for the port state change.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.114
rcPortMdixMode Defines the MDI crossover (MDIX) modes for the port	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.1.1.115
rcPortFlexUniEnable Used to set FLEX UNI enable/disable on port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.116
rcPortBpduGuardTimerCount The remaining time the port will be disabled due to a BPDU received when BPDU guard is enabled.	secondsSNMPv2-SMIInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.117
rcPortBpduGuardTimeout The time the port will be disabled when a BPDU is received when BPDU Guard is enabled.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.118
rcPortBpduGuardAdminEnabled Used to enable/disable BPDU guard.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.119
rcPortLicenseControlStatus This object show the license conrol status of a port. It is only applicable to a port which reuqires PORT license file to be adminstratively enabled (ifAdminStatus). 'locked' means the port requires PORT …	Enumeration	.1.3.6.1.4.1.2272.1.4.10.1.1.120
rcPortTxFlowControl Used to enable/disable Tx flow control.	SNMPv2-TCTruthValuer/w Enumerated Values: 0 inValidSession 1 validSession Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.121
rcPortTxFlowControlOperState Used to indicate the Tx flow control operational state.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.122

rcPortPcapTable

table

.1.3.6.1.4.1.2272.1.4.10.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortPcapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortPcapTable'

Copy

Port pcap Table

rcPortPcapEntry row .1.3.6.1.4.1.2272.1.4.10.2.1

Entry containing pcap info. for a particular port

Indexes

rcPortMgmtLinkIndex

Column	Syntax	OID
rcPortPcapIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.2.1.1
rcPortPcapEnable To enable pcap for the port	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.2.1.2
rcPortPcapMode Mode in which pcap is enabled	Enumerationr/w Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.4.10.2.1.3
rcPortPcapFilterListSize Used to indicate the number of filter list(s) that are assigned to this port.	Integer32	.1.3.6.1.4.1.2272.1.4.10.2.1.4
rcPortPcapFilterList Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zer…	OctetStringr/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.2.1.5
rcPortPcapAclFilterListSize Used to indicate the number of ACL filter(s) that are assigned to this port which has mirror set as global-action.	Integer32 Enumerated Values: 0 none 1 mbps10 2 mbps100 3 mbps1000	.1.3.6.1.4.1.2272.1.4.10.2.1.6
rcPortPcapAclFilterList Used to indicate zero or more ACL filter lists that are associated with this port for pcap (has mirror set as global-action). Each ACL filter list identifier is stored as two bytes in this array starting from offset …	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.10.2.1.7

rcPortPoePseIndexTable

table

.1.3.6.1.4.1.2272.1.4.10.3.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortPoePseIndexTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortPoePseIndexTable'

Copy

Port table

rcPortPoePseIndexEntry row .1.3.6.1.4.1.2272.1.4.10.3.1.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortPoePseIndexIfIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.4.10.3.1.1.1
rcPortPoePseIndexGroupIndex An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.	Integer32	.1.3.6.1.4.1.2272.1.4.10.3.1.1.2
rcPortPoePseIndexPortIndex This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected.	Integer32	.1.3.6.1.4.1.2272.1.4.10.3.1.1.3

rcPortPoeMainPseExtnTable

table

.1.3.6.1.4.1.2272.1.4.10.3.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortPoeMainPseExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortPoeMainPseExtnTable'

Copy

Port table

rcPortPoeMainPseExtnEntry row .1.3.6.1.4.1.2272.1.4.10.3.2.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortPoeMainPseExtnGroupIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 0-10	.1.3.6.1.4.1.2272.1.4.10.3.2.1.1
rcPortPoeMainPseExtnPwrAdmin An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	EnableValuer/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.4.10.3.2.1.2
rcPortPoeMainPseExtnPwrPriority An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.3.2.1.3
rcPortPoeMainPseExtnDeviceDetectType An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.3.2.1.4
rcPortPoeMainPseExtnPwrLimit The maximum available PoE power of the main PSE expressed in Watts.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.3.2.1.5

rcPortPoePsePortExtnTable

table

.1.3.6.1.4.1.2272.1.4.10.3.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortPoePsePortExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortPoePsePortExtnTable'

Copy

Port table

rcPortPoePsePortExtnEntry row .1.3.6.1.4.1.2272.1.4.10.3.3.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortPoePsePortExtnGroupIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.4.10.3.3.1.1
rcPortPoePsePortExtnPortIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.4.10.3.3.1.2
rcPortPoePsePortExtnPwrLimit An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.3.3.1.3
rcPortPoePsePortExtnMeasuredVolt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.4
rcPortPoePsePortExtnMeasuredCurrent An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.5
rcPortPoePsePortExtnPwrConsumpt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.6

rcPortLacpTable

table

.1.3.6.1.4.1.2272.1.4.10.4 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortLacpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortLacpTable'

Copy

Port LACP table

rcPortLacpEntry row .1.3.6.1.4.1.2272.1.4.10.4.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortLacpAdminEnable Administratively enable/disable LACP on a port	SNMPv2-TCTruthValuer/w Constraints: range: 0-63 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.1
rcPortLacpOperEnable Indicates if LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.2
rcPortLacpFastPeriodicTime The number of miliseconds between periodic transmissions using Short Timeouts.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.4.1.3
rcPortLacpSlowPeriodicTime The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.4.1.4
rcPortLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.4.1.5
rcPortLacpAggrWaitTime The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.4.1.6
rcPortLacpFastPeriodicTimeOper The operating value of fast periodic timer on the port.	Integer32	.1.3.6.1.4.1.2272.1.4.10.4.1.7
rcPortLacpSlowPeriodicTimeOper The operating value of slow periodic timer on the port.	Integer32	.1.3.6.1.4.1.2272.1.4.10.4.1.8
rcPortLacpTimeoutScaleOper The operating value of timeout scale on the port.	Integer32 Enumerated Values: 1 fc 2 pfc	.1.3.6.1.4.1.2272.1.4.10.4.1.9
rcPortLacpAggrWaitTimeOper The operating value of aggreagate wait time on port.	Integer32 Constraints: range: 2-8	.1.3.6.1.4.1.2272.1.4.10.4.1.10
rcPortLacpSuppressMisConfigLog Enable/Disable Suppression of misconfiguration logs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.11

rcPortVLacpTable

table

.1.3.6.1.4.1.2272.1.4.10.5 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortVLacpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortVLacpTable'

Copy

Port Virtual LACP table

rcPortVLacpEntry row .1.3.6.1.4.1.2272.1.4.10.5.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortVLacpAdminEnable Administratively enable/disable Virtual LACP on a port	SNMPv2-TCTruthValuer/w Enumerated Values: 1 fortyGig 2 hundredGig Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.1
rcPortVLacpOperEnable Indicates if Virtual LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.2
rcPortVLacpFastPeriodicTimer The number of miliseconds between periodic transmissions using Short Timeouts	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.5.1.3
rcPortVLacpSlowPeriodicTimer The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.5.1.4
rcPortVLacpTimeout Timeout control value. Long or Short Timeout	Enumerationr/w Constraints: range: 0-9	.1.3.6.1.4.1.2272.1.4.10.5.1.5
rcPortVLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.5.1.6
rcPortVLacpEtherType VLACP Protocol Identification. The id value is in Hex. Range in hex (0x600..0xffff)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.5.1.7
rcPortVLacpEtherMacAddress Multicast Mac Address exclusively used for VLACPDU's	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.5.1.8
rcPortVLacpPortState Display the Vlacp Port State.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.5.1.9
rcPortVLacpDualHomingEnable Enable/Disable Dual homing on Virtual LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.10
rcPortVLacpFlapDetectEnable Administratively enable/disable VLACP flap detection on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.11
rcPortVLacpFlapFrequency The number of VLACP Flaps on a port, that if they occure within rcPortVLacpFlapInterval seconds, the port is shutdown.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.5.1.12
rcPortVLacpFlapInterval The time inteval in seconds within which VLACP flaps on a port are monitored.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.5.1.13
rcPortVLacpTotalFlapCount Total Number of VLACP flaps detected on this port since either enabling VLACP or clearing the counter.	SNMPv2-SMICounter32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.5.1.14
rcPortVLacpFirstFlapTimeStamp Timestamp for the first VLACP flap detected on this port since either enabling VLACP or clearing the timer.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.4.10.5.1.15
rcPortVLacpLastFlapTimeStamp Timestamp for the latest VLACP flap detected on this port since either enabling VLACP or clearing the timer.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.4.10.5.1.16
rcPortVLacpFlapClearStats Clears all VLACP flap counters and timers.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.17

rcPortRemoteMirroringTable

table

.1.3.6.1.4.1.2272.1.4.10.6 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortRemoteMirroringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortRemoteMirroringTable'

Copy

Port Remote Mirroring Table

rcPortRemoteMirroringEntry row .1.3.6.1.4.1.2272.1.4.10.6.1

Entry containing remote mirroring info. for a
particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortRemoteMirroringIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.6.1.1
rcPortRemoteMirroringEnable To enable remote Mirroring for the port	SNMPv2-TCTruthValuer/w Enumerated Values: 1 none 2 firewall 3 ssl 4 ids 5 vpn 6 tps Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.6.1.2
rcPortRemoteMirroringMode Mode in which remote mirroring is enabled	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.6.1.3
rcPortRemoteMirroringSrcMac Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.4
rcPortRemoteMirroringDstMac Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.5
rcPortRemoteMirroringEtherType Ethertype of the remote mirrored packet. Packets will be send with this ethertype	Integer32r/w Enumerated Values: 1 fw 2 tps 3 none	.1.3.6.1.4.1.2272.1.4.10.6.1.6
rcPortRemoteMirroringVlanIdListSize Used to indicate the number of VLAN IDs that are assigned to this port.	Integer32	.1.3.6.1.4.1.2272.1.4.10.6.1.7
rcPortRemoteMirroringVlanIdList This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac address resides. Each VLAN ID is stored as two bytes in th…	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.10.6.1.8
rcPortRemoteMirroringRowStatus RowStatus	SNMPv2-TCRowStatusr/w Constraints: range: 1-64 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.10.6.1.9

rcPortVlacpSessionTable

table

.1.3.6.1.4.1.2272.1.4.10.7 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortVlacpSessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortVlacpSessionTable'

Copy

A table used to maintain Vlacp session values.

rcPortVlacpSessionEntry row .1.3.6.1.4.1.2272.1.4.10.7.1

Entry containing Vlacp Session information
regarding a particular port or mlt.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortVlacpSessionIfIndex IfIndex of the port or Mlt	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.4.10.7.1.1
rcPortVlacpSessionSesNumber Session number of an IfIndex	Integer32	.1.3.6.1.4.1.2272.1.4.10.7.1.2
rcPortVlacpSessionSrcMacAddress Mac Address for the session	SNMPv2-TCMacAddress Constraints: range: 0-4094 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.7.1.3
rcPortVlacpSessionRxTimer The Rx timer for the session	SNMPv2-SMIInteger32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.4.10.7.1.4
rcPortVlacpSessionValidbit The valid bit for the session	Enumeration Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.4.10.7.1.5
rcPortVlacpSessionInPktCount The In packet count for the session	SNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.4.10.7.1.6

rcPortMgmtLinkTable

table

.1.3.6.1.4.1.2272.1.4.10.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortMgmtLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortMgmtLinkTable'

Copy

Port card mgmt port link table

rcPortMgmtLinkEntry row .1.3.6.1.4.1.2272.1.4.10.8.1

Entry containing info. for a particular mgmt port in I/O
card

Indexes

No indexes recorded

Column	Syntax	OID
rcPortMgmtLinkIndex IfIndex of the port.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.8.1.1
rcPortMgmtLinkDescr Port description	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.4.10.8.1.2
rcPortMgmtLinkOperStatus admin status of the mgmt port	Enumeration	.1.3.6.1.4.1.2272.1.4.10.8.1.3
rcPortMgmtLinkAutoNegotiate Auto-negotiation status of the port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.8.1.4
rcPortMgmtLinkDuplex duplex setting for the port	Enumeration Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.4.10.8.1.5
rcPortMgmtLinkSpeed speed setting for this port.	Enumeration Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.4.10.8.1.6

rcPortFlushFdbTable

table

.1.3.6.1.4.1.2272.1.4.10.9 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortFlushFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortFlushFdbTable'

Copy

Port Flush Fdbtable

rcPortFlushFdbEntry row .1.3.6.1.4.1.2272.1.4.10.9.1

port based deletion of mac addresses
learned or discarded on that port

Indexes

No indexes recorded

Column	Syntax	OID
rcPortFlushFdbAddress Mac Address to be deleted.	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.10.9.1.1
rcPortFlushFdbVlanId vlan Id associated with the Mac Address	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2272.1.4.10.9.1.2

rcPortRemotePortShutdownTable

table

.1.3.6.1.4.1.2272.1.4.10.10 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortRemotePortShutdownTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortRemotePortShutdownTable'

Copy

A list of RemotePortShutdown port info.

rcPortRemotePortShutdownEntry row .1.3.6.1.4.1.2272.1.4.10.10.1

A RemotePortShutdown table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortRemotePortShutdownIfIndex The ifIndex value for a port.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.10.1.1
rcPortRemotePortShutdownEnabled This object controls whether the Remote-Port-Shutdown feature is enabled or disabled on a port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.10.1.2
rcPortRemotePortShutdownHoldTimer Indicates the time period after a port has been shutdown during which it will remain down, regardless of any CCMs received during that time period.	secondsInteger32r/w Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.4.10.10.1.3
rcPortRemotePortShutdownStatus This object indicates whether a port is shutdown by the remote port shutdown feature.	Enumeration	.1.3.6.1.4.1.2272.1.4.10.10.1.4
rcPortRemotePortShutdownLocalMacAddress Local MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.10.1.5
rcPortRemotePortShutdownRemoteMacAddress Remote MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.10.1.6

rcPortFlushMacTable

table

.1.3.6.1.4.1.2272.1.4.10.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortFlushMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortFlushMacTable'

Copy

Flush MAC entry on a port.

rcPortFlushMacEntry row .1.3.6.1.4.1.2272.1.4.10.11.1

Port mac flush table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortFlushMacPortNum Port number where the mac record exists.	Integer32	.1.3.6.1.4.1.2272.1.4.10.11.1.1
rcPortFlushMacAddr Mac Address that needs to be removed.	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.10.11.1.2
rcPortFlushMacVlanId Vlan Id associated with the Mac Address.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.11.1.3

rcLldpXMedLocMediaPolicyTable

table

.1.3.6.1.4.1.2272.1.4.10.12 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLldpXMedLocMediaPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLldpXMedLocMediaPolicyTable'

Copy

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

rcLldpXMedLocMediaPolicyEntry row .1.3.6.1.4.1.2272.1.4.10.12.1

Information about a particular policy on a specific
port component.

Indexes

No indexes recorded

Column	Syntax	OID
rcLldpXMedLocMediaPolicyPortNum .	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.12.1.1
rcLldpXMedLocMediaPolicyAppType The media type that defines the primary function of the application for the policy advertised by an endpoint.	LLDP-EXT-MED-MIBPolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.3.6.1.4.1.2272.1.4.10.12.1.2
rcLldpXMedLocMediaPolicyVlanID An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the …	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.12.1.3
rcLldpXMedLocMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.4.10.12.1.4
rcLldpXMedLocMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.4.10.12.1.5
rcLldpXMedLocMediaPolicyUnknown A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind…	SNMPv2-TCTruthValuer/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 99 passive Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.12.1.6
rcLldpXMedLocMediaPolicyTagged A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port…	SNMPv2-TCTruthValuer/w Constraints: range: 1-15 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.12.1.7
rcLldpXMedLocMediaPolicyRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Constraints: range: 0-360 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.10.12.1.8

rcPortLosslessEnetTable

table

.1.3.6.1.4.1.2272.1.4.10.13 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortLosslessEnetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortLosslessEnetTable'

Copy

Port Lossless Ethernet Table

rcPortLosslessEnetEntry row .1.3.6.1.4.1.2272.1.4.10.13.1

Entry containing lossless Ethernet information
for a particular port.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortLosslessEnetIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.13.1.1
rcPortLosslessEnetConfigured To enable lossless mode for the port	SNMPv2-TCTruthValuer/w Enumerated Values: 1 exist-only 2 strict Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.13.1.2
rcPortLosslessEnetPauseType Pause frame type. fc - Pause, pfc - priority-based flow control.	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.10.13.1.3
rcPortLosslessEnetPfcBandwidth Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2).	Integer32r/w	.1.3.6.1.4.1.2272.1.4.10.13.1.4

rcChannelizedPortTable

table

.1.3.6.1.4.1.2272.1.4.10.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChannelizedPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChannelizedPortTable'

Copy

Port table for all channelized capable ports.

rcChannelizedPortEntry row .1.3.6.1.4.1.2272.1.4.10.14.1

Entry containing info for a key port of channelized
capable port.

Indexes

No indexes recorded

Column	Syntax	OID
rcChannelizedPortIndex An index value that uniquely identifies a port which is channelized capable.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.10.14.1.1
rcChannelizedPortChannelType port channelized type. Either 40G or 100G.	Enumeration Enumerated Values: 1 unspecified 2 v2 3 v3	.1.3.6.1.4.1.2272.1.4.10.14.1.2
rcChannelizedPortAdminMode Administratively enable/disable the port channelized mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.14.1.3

rcPortExtendTable

table

.1.3.6.1.4.1.2272.1.4.10.15 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortExtendTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortExtendTable'

Copy

Port extend table.

rcPortExtendEntry row .1.3.6.1.4.1.2272.1.4.10.15.1

Entry containing info for a key port.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortExtendPortDisplayFormat The port format to display.	OctetString	.1.3.6.1.4.1.2272.1.4.10.15.1.1

rcPortVlacpStatsTable

table

.1.3.6.1.4.1.2272.1.4.10.16 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPortVlacpStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPortVlacpStatsTable'

Copy

A table that contains VLACP information
about every port that is associated with this device.
A row appears in this table for each physical port.

rcPortVlacpStatsEntry row .1.3.6.1.4.1.2272.1.4.10.16.1

A list of Virtual Link Aggregation Control Protocol statistics
for each port on this device.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortVlacpIndex The ifIndex of VLACP ports	InterfaceIndex Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.4.10.16.1.1
rcPortVlacpStatsLACPDUsRx The number of valid VLACPDUs received on this Port. This value is read-only.	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.16.1.2
rcPortVlacpStatsLACPDUsTx The number of VLACPDUs transmitted on this Port. This value is read-only.	SNMPv2-SMICounter32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.10.16.1.3
rcPortVlacpStatsLACPDUsMismatch The number of mismatched VLACPDUs in terms of seq-num RX'ed on this Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.16.1.4

rcAgentTable

table

.1.3.6.1.4.1.2272.1.4.16 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcAgentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcAgentTable'

Copy

Agents in a chassis table

rcAgentEntry row .1.3.6.1.4.1.2272.1.4.16.1

Entry containing info. for a particular agent

Indexes

No indexes recorded

Column	Syntax	OID
rcAgentId entry id	Integer32	.1.3.6.1.4.1.2272.1.4.16.1.1
rcAgentSlot slot agent is in.	SNMPv2-SMIInteger32 Enumerated Values: 0 none 1 simplePassword 2 md5 3 sha1 4 sha2 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.16.1.2
rcAgentIpAddr agent's ip address.	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.16.1.3

rcLaunchPadTable

table

.1.3.6.1.4.1.2272.1.4.30.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLaunchPadTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLaunchPadTable'

Copy

Launch Pad in a chassis table

rcLaunchPadEntry row .1.3.6.1.4.1.2272.1.4.30.1.1

Entry containing Launch pad card info

Indexes

No indexes recorded

Column	Syntax	OID
rcLaunchPadSlotId Launch Pad card id	Integer32	.1.3.6.1.4.1.2272.1.4.30.1.1.1
rcLaunchPadMiniSlotId Launch pad mini card id.	Integer32	.1.3.6.1.4.1.2272.1.4.30.1.1.2
rcLaunchPadAppType Launch Pad application type.	Enumeration	.1.3.6.1.4.1.2272.1.4.30.1.1.3
rcLaunchPadMiniSlotIp Launch Pad mini card's ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.4.30.1.1.4
rcLaunchPadNaapLpState Enable/Disable naap Ip state.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.30.1.1.5
rcLaunchPadMiniSlotSwVersion Launch Pad mini card's SW version.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.4.30.1.1.6
rcLaunchPadHWType for identifying the ISD	Enumeration	.1.3.6.1.4.1.2272.1.4.30.1.1.7

rcLaunchPadClusterTable

table

.1.3.6.1.4.1.2272.1.4.30.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLaunchPadClusterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLaunchPadClusterTable'

Copy

Launch Pad Cluster Table

rcLaunchPadClusterEntry row .1.3.6.1.4.1.2272.1.4.30.2.1

Entry containing Launch pad cluster info

Indexes

No indexes recorded

Column	Syntax	OID
rcLaunchPadClusterId Launch pad cluster id.	Integer32	.1.3.6.1.4.1.2272.1.4.30.2.1.1
rcLaunchPadClusterType Launch Pad cluster type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.4.30.2.1.2
rcLaunchPadClusterSize Launch pad cluster size.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.30.2.1.3
rcLaunchPadClusterMembers Launch pad cluster members	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.30.2.1.4
rcLaunchPadClusterRowStatus Launch pad cluster Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.30.2.1.5
rcLaunchPadClusterMgmtVlan Launch pad cluster management vlan Id.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.30.2.1.6
rcLaunchPadClusterSyncVlan Launch pad cluster cp sync vlan Id.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.30.2.1.7
rcLaunchPadClusterTpsSize Launch pad cluster TPS size.	Integer32r/w	.1.3.6.1.4.1.2272.1.4.30.2.1.8
rcLaunchPadClusterTpsMembers Launch pad cluster TPS members	OctetStringr/w	.1.3.6.1.4.1.2272.1.4.30.2.1.9
rcLaunchPadClusterPortMember IS cluster user port list that needs to be monitored	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.4.30.2.1.10

rcRepeaterTable

table

.1.3.6.1.4.1.2272.1.4.39.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRepeaterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRepeaterTable'

Copy

Port repeater table

rcRepeaterEntry row .1.3.6.1.4.1.2272.1.4.39.1.1

Entry containing info. for a particular repeater

Indexes

No indexes recorded

Column	Syntax	OID
rcRepeaterId A value that uniquely identifies the repeater.	Integer32	.1.3.6.1.4.1.2272.1.4.39.1.1.1
rcRepeaterFirstPort First port member of the Repeater	InterfaceIndexr/w Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.4.39.1.1.2
rcRepeaterSecondPort Second port member of the Repeater	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.4.39.1.1.3
rcRepeaterVlanId A value that uniquely identifies the Virtual LAN associated with first port	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.4.39.1.1.4
rcRepeaterName An administratively-assigned name for this repeater.	OctetStringr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.39.1.1.5
rcRepeaterRowStatus Used to create/delete entries in the rcRepeater.	SNMPv2-TCRowStatusr/w Constraints: range: 8-8 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.39.1.1.6

rcChasLedTable

table

.1.3.6.1.4.1.2272.1.4.65.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcChasLedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcChasLedTable'

Copy

This table contains information about LEDs of the chassis

rcChasLedEntry row .1.3.6.1.4.1.2272.1.4.65.1.1

Contains information regarding a LED Unit

Indexes

No indexes recorded

Column	Syntax	OID
rcChasLedId The chassis LED Id.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.65.1.1.1
rcChasLedLabel The LED's label name.	OctetString	.1.3.6.1.4.1.2272.1.4.65.1.1.2
rcChasLedStatus Type of the Led: - unknown(1) - type can not be determined. - greenSteady(2), - greenBlinking(3), - amberSteady(4), - amberBlinking(5), - off(6), - redSteady(7), - redBlinking…	Enumeration Enumerated Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.2272.1.4.65.1.1.3

rcIpConfTable

table

.1.3.6.1.4.1.2272.1.8.1.1 · 1 row entry · 32 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfTable'

Copy

A table used to maintain IP routing information 
for a particular interface.

rcIpConfEntry row .1.3.6.1.4.1.2272.1.8.1.1.1

Entry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfOspfAreaAggregateAreaID rcIpConfOspfAreaAggregateLsdbType rcIpConfOspfAreaAggregateNet rcIpConfOspfAreaAggregateMask

Column	Syntax	OID
rcIpConfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32	.1.3.6.1.4.1.2272.1.8.1.1.1.1
rcIpConfAdvertDefRte Used to indicate whether this interface should advertize a RIP default route.	SNMPv2-TCTruthValuer/w Enumerated Values: 3 summaryLink 7 nssaExternalLink Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.2
rcIpConfAcceptDefRte Used to indicate whether this interface should accept a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.3
rcIpConfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.1.1.4
rcIpConfRipEnable Enable or disable RIP routing on the specified interface.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.5
rcIpConfOspfEnable Enable or disable OSPF routing on the specified interface.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching 3 advertiseDoNotAggregate Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.6
rcIpConfIgmpEnable Enable or disable IGMP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.7
rcIpConfAddrAssigned Indicate whether IpAddress has been assigned for this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.8
rcIpConfDhcpEnable Enable or disable DHCP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.9
rcIpConfTriggeredUpdateEnable Used to indicate whether the RIP triggered update feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.10
rcIpConfAutoAggrerateEnable Used to indicate whether the auto aggregation feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 range: 9999-9999 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.11
rcIpConfGenerateDefaultRoute Used to indicate whether to generate a default RIP route on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.12
rcIpConfAdvertiseWhenDown The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.13
rcIpConfDirectBroadcastEnable Used to indicate whether this interface should forward direct broadcast traffic	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.14
rcIpConfRipInPolicy Used to indicate whether this interface should advertize a RIP default route.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.1.1.1.15
rcIpConfRipOutPolicy Used to indicate whether this interface should accept a RIP default route.	OctetStringr/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.8.1.1.1.16
rcIpConfOspfIfType OSPF Interface Type.	Enumerationr/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.8.1.1.1.17
rcIpConfRipCost Used to indicate the rip cost for this interface.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.8.1.1.1.18
rcIpConfRipHolddown Used to indicate the rip holddown timer for this interface	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.1.1.19
rcIpConfRipTimeout Used to indicate the rip timeout interval for this interface	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.1.1.20
rcIpConfRsmltEnable Used to enable Route Smlt feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.21
rcIpConfReversePathCheckEnable Used to indicate whether this interface should perform Reverse Path Check	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.22
rcIpConfReversePathCheckMode Reverse Path Checking mode.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.1.1.23
rcIpConfIsisEnable Enable/disable ISIS protocol for this IP entry	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.24
rcIpConfBfdEnable Enable or disable BFD on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.25
rcIpConfIpVpnLiteEnable Enable or disable ipvpn-lite capability on the specified circuitless ip interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.26
rcIpConfSpbMulticastEnable Enable or disable spb-multicast on this port	SNMPv2-TCTruthValuer/w Enumerated Values: 0 zeros 1 ones Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.27
rcIpConfSpbMulticastQuerierAddr querier-addr for spb-multicast	SNMPv2-SMIIpAddressr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.1.1.28
rcIpConfVrrpVersion Set the VRRP version for IPv4 on the specified interface. It does not impact the use of IPv6 VRRPv3	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.1.1.29
rcIpConfPimGatewayEnable Enable or disable PIM Gateway on this port	SNMPv2-TCTruthValuer/w Constraints: range: 0-4096 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.30
rcIpConfVrrpChkSumComputation Set the IPv4 VRRPv3 checksum computation method on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.1.1.31
rcIpConfIpsecEnable Used to enable ipsec feature.	SNMPv2-TCTruthValuer/w Constraints: range: 0-511 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.32

rcIpConfOspfTable

table

.1.3.6.1.4.1.2272.1.8.1.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfOspfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfOspfTable'

Copy

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfEntry row .1.3.6.1.4.1.2272.1.8.1.2.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfOspfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32	.1.3.6.1.4.1.2272.1.8.1.2.1.1
rcIpConfOspfRtrPriority The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.2.1.2
rcIpConfOspfMetric The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfO…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.2.1.3
rcIpConfOspfAuthKey The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated i…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.1.2.1.4
rcIpConfOspfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.2.1.5
rcIpConfOspfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.2.1.6
rcIpConfOspfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers at…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.2.1.7
rcIpConfOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddressr/w Enumerated Values: 4 ip 6 tcp 17 udp Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.2.1.8
rcIpConfOspfAuthType The authentication type specified for an interface. Additional authentication types may be assigned locally.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.2.1.9
rcIpConfOspfPollInterval OSPF NBMA Interface Poll Interval.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.2.1.10
rcIpConfOspfIfMtuIgnore Mtu-ignore flag is for ignoring the mtu checking in ospf bdb	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.2.1.11
rcIpConfOspfBfdEnable Used to enable/disable BFD for OSPF.	EnableValuer/w Enumerated Values: 1 radius 2 syslog 3 tacacs 4 snmp 5 ssh 6 telnet	.1.3.6.1.4.1.2272.1.8.1.2.1.12

rcIpConfOspfAreaTable

table

.1.3.6.1.4.1.2272.1.8.1.7 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfOspfAreaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfOspfAreaTable'

Copy

A table used to maintain OSPF information
for a particular Area.

rcIpConfOspfAreaEntry row .1.3.6.1.4.1.2272.1.8.1.7.1

Entry containing OSPF Area configuration
information. An entry is automatically created
in this table when an area is configured through
ospfAreaTable in (rfc1253rcc.mib).

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfOspfAreaId An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.7.1.1
rcIpConfOspfAreaImportSummary The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.7.1.2
rcIpConfOspfAreaActiveIfCount This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0.	SNMPv2-SMIInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.7.1.3

rcIpConfV2Table

table obsolete

.1.3.6.1.4.1.2272.1.8.1.8 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfV2Table'

Copy

A table used to maintain IP routing information 
for a particular interface.

rcIpConfV2Entry row .1.3.6.1.4.1.2272.1.8.1.8.1

Entry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfV2Indexobsolete An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.1.8.1.1
rcIpConfV2Addrobsolete Ip interface address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.8.1.2
rcIpConfV2RowStatusobsolete Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.8.1.3
rcIpConfV2AdvertDefRteobsolete Used to indicate whether this interface should advertize a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.4
rcIpConfV2AcceptDefRteobsolete Used to indicate whether this interface should accept a RIP default route.	SNMPv2-TCTruthValuer/w Constraints: range: 2-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.5
rcIpConfV2RipEnableobsolete Enable or disable RIP routing on the specified interface.	SNMPv2-TCTruthValuer/w Constraints: range: 1-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.6
rcIpConfV2OspfEnableobsolete Enable or disable OSPF routing on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.7
rcIpConfV2IgmpEnableobsolete Enable or disable IGMP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.8
rcIpConfV2AddrAssignedobsolete Indicate whether IpAddress has been assigned for this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.9
rcIpConfV2TriggeredUpdateEnableobsolete Used to indicate whether the RIP triggered update feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.10
rcIpConfV2RipAutoAggrerateEnableobsolete Used to indicate whether the auto aggregation feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.11
rcIpConfV2RipGenerateDefaultRouteobsolete Used to indicate whether to generate a default RIP route on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.12
rcIpConfV2AdvertiseWhenDownobsolete The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state…	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.8.1.13

rcIpConfOspfV2Table

table obsolete

.1.3.6.1.4.1.2272.1.8.1.9 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfOspfV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfOspfV2Table'

Copy

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfV2Entry row .1.3.6.1.4.1.2272.1.8.1.9.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfOspfV2IfIndexobsolete An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.1.9.1.1
rcIpConfOspfV2IpAddrobsolete IpAddress of the IP interface.	SNMPv2-SMIIpAddress Enumerated Values: 1 noState 2 auth 3 accStart 4 authAndAcctStart 5 authAndAcctDisabled Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.9.1.2
rcIpConfOspfV2RtrPriorityobsolete The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.9.1.3
rcIpConfOspfV2Metricobsolete The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfO…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.9.1.4
rcIpConfOspfV2AuthKeyobsolete The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.1.9.1.5
rcIpConfOspfV2RowStatusobsolete Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.9.1.6
rcIpConfOspfV2HelloIntervalobsolete The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.9.1.7
rcIpConfOspfV2RtrDeadIntervalobsolete The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers at…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.9.1.8
rcIpConfOspfV2IfAreaIdobsolete A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.9.1.9
rcIpConfOspfV2AuthTypeobsolete The authentication type specified for an interface. Additional authentication types may be assigned locally.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.9.1.10

rcIpConfOspfAreaAggregateTable

table

.1.3.6.1.4.1.2272.1.8.1.10 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfOspfAreaAggregateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfOspfAreaAggregateTable'

Copy

A table used to maintain OSPF summary route
metric parameter for a particular Area range.

rcIpConfOspfAreaAggregateEntry row .1.3.6.1.4.1.2272.1.8.1.10.1

Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfOspfAreaAggregateAreaID The Area the Address Aggregate is to be found within.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.10.1.1
rcIpConfOspfAreaAggregateLsdbType The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.	Enumeration	.1.3.6.1.4.1.2272.1.8.1.10.1.2
rcIpConfOspfAreaAggregateNet The IP Address of the Net or Subnet indicated by the range.	SNMPv2-SMIIpAddress Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.1.10.1.3
rcIpConfOspfAreaAggregateMask The Subnet Mask that pertains to the Net or Subnet.	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.1.10.1.4
rcIpConfOspfAreaAggregateAdvertiseMetric Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric.	Integer32r/w Enumerated Values: 0 iA 1 iAE 2 iB 3 iBE 6 dB 8 iAN 9 iAEN 10 iBN 11 iBEN 14 dBN 16 iAU 17 iAEU 18 iBU 19 iBEU 22 dBU 34 iBF 35 iBEF 66 iBV 67 iBEV 74 iBVN 75 iBEVN 128 iAS 129 iASE 130 iBS 131 iBSE 138 iBSN 139 iBSEN 192 iASV 193 iASVE 194 iBSV 195 iBSVE	.1.3.6.1.4.1.2272.1.8.1.10.1.5
rcIpConfOspfAreaAggregateEffect Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.1.10.1.6

rcIpConfRsmltTable

table

.1.3.6.1.4.1.2272.1.8.1.11 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfRsmltTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfRsmltTable'

Copy

A table used to maintain OSPF summary route
metric parameter for a particular Area range.

rcIpConfRsmltEntry row .1.3.6.1.4.1.2272.1.8.1.11.1

Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfRsmltIfIndex Interface Index, this is an index of the table.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.1.11.1.1
rcIpConfRsmltHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.11.1.2
rcIpConfRsmltHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.11.1.3
rcIpConfRsmltRowStatus Row Status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-6142 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.11.1.4

rcIpConfBfdTable

table

.1.3.6.1.4.1.2272.1.8.1.12 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfBfdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfBfdTable'

Copy

BFD configuration table

rcIpConfBfdEntry row .1.3.6.1.4.1.2272.1.8.1.12.1

Used to configure BFD on a particular interface. An
entry is created automatically when the variable
rcIpConfBfdEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfBfdRowStatus is set to …

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfBfdIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	InterfaceIndex Enumerated Values: 0 none 2 bootp 3 dhcp 4 both Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.1.12.1.1
rcIpConfBfdMinRxInterval the min rx interval in milliseconds	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.12.1.2
rcIpConfBfdTxInterval the desired tx interval in milliseconds	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.12.1.3
rcIpConfBfdMultiplier the multiplier BFD wait before rx timeout	Integer32r/w	.1.3.6.1.4.1.2272.1.8.1.12.1.4
rcIpConfBfdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.12.1.5
rcIpConfBfdHoldOffInterval This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled.	Unsigned32r/w Enumerated Values: 1 clear 2 dummy	.1.3.6.1.4.1.2272.1.8.1.12.1.6
rcIpConfBfdStaticFlag This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.1.12.1.7

rcIpAddrTable

table

.1.3.6.1.4.1.2272.1.8.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpAddrTable'

Copy

The table of addressing information relevant to
this entity's IP addresses.
          
This table is identical to the ipAddrTable in 
MIB2 except the columns rcIpAdEntIfIndex and 
rcIpAdEntAddr are reversed.  Also, the table 
is indexed by both these variables.

rcIpAddrEntry row .1.3.6.1.4.1.2272.1.8.2.1

The addressing information for one of this
entity's IP addresses.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.2.1.1
rcIpAdEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.2.1.2
rcIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.2.1.3
rcIpAdEntBcastAddrFormat The IP broadcast address format used on this interface.	Enumeration	.1.3.6.1.4.1.2272.1.8.2.1.4
rcIpAdEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.	Integer32	.1.3.6.1.4.1.2272.1.8.2.1.5
rcIpAdEntRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.2.1.6
rcIpAdEntVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.2.1.7
rcIpAdEntBrouterPort Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created.	SNMPv2-TCTruthValue Enumerated Values: 0 none 2 bootp 3 dhcp 4 both Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.2.1.8
rcIpAdEntMacOffset Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring an ip…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.2.1.9
rcIpAdEntIfType The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be thought of as a virtual interface. The value 'brouter …	Enumeration	.1.3.6.1.4.1.2272.1.8.2.1.10
rcIpAdEntSecondaryIf Used to indicate whether this entry correponds to a secondary interface (as oppose to a primary interface). This value cannot be changed after the row is created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.2.1.11
rcIpAdEntVrfId The VrfId used in this table is to associate VLANs or Brouter ports to a VRF after the creation of VLANs or Brouter ports. VRFID 0 is reserved for the Administrative VRF.	VrfIdentifierr/w Enumerated Values: 1 global 2 destination 3 source Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.2.1.12

rcIpFlowTable

table

.1.3.6.1.4.1.2272.1.8.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFlowTable'

Copy

IpFlow Table.  This table contain entries that
correspond to RSVP records in the switching
fabric Address Resolution table.
          
A connection that has a matching entry in this 
table will be processed with a higher priority 
than connections that do not have an entry.

rcIpFlowEntry row .1.3.6.1.4.1.2272.1.8.3.1

Proprietary flow control variables.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFlowSrcIpAddress The source IP address of an IP packet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.3.1.1
rcIpFlowSrcIpPort The source port of an IP packet. A zero value in this field is used as a wildcard value.	Integer32	.1.3.6.1.4.1.2272.1.8.3.1.2
rcIpFlowDstIpAddress The destination IP address of an IP packet.	SNMPv2-SMIIpAddress Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.8.3.1.3
rcIpFlowDstIpPort The destination port of an IP packet. A zero value in this field is used as a wildcard value.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.3.1.4
rcIpFlowProtocol The protocol type of an IP packet. A zero value in this field is used as a wildcard value.	Enumeration Enumerated Values: 0 ignore 1 icmp 6 tcp 17 udp 50 ipsecesp 51 ipsecah 89 ospf 112 vrrp 256 usrDefined	.1.3.6.1.4.1.2272.1.8.3.1.5
rcIpFlowRowStatus Status of entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.3.1.6

rcIpSourceInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.4.8 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSourceInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSourceInterfaceTable'

Copy

Table used to maintain source address information.

rcIpSourceInterfaceEntry row .1.3.6.1.4.1.2272.1.8.4.8.1

An entry of Ip Source Interface Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSourceInterfaceAppId The application which can be set to use a specific interface as source IP address in packets sent from the switch.	Enumeration Enumerated Values: 0 equal 1 notEqual 2 greater 3 less 4 ignore	.1.3.6.1.4.1.2272.1.8.4.8.1.1
rcIpSourceInterfaceType The type of source address used.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.4.8.1.2
rcIpSourceInterfaceId The ID of the interface used as source address. An ID of 0 means no interface is currently set for this entry.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.4.8.1.3

rcIpConfIgmpTable

table obsolete

.1.3.6.1.4.1.2272.1.8.5 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfIgmpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfIgmpTable'

Copy

A table used to maintain IGMP information
for a particular interface.

rcIpConfIgmpEntry row .1.3.6.1.4.1.2272.1.8.5.1

Entry containing IGMP information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfIgmpIfIndexobsolete An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.8.5.1.1
rcIpConfIgmpQueryIntervalobsolete The frequency at which IGMP Host-Query packets are transmitted on this interface.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.5.1.2
rcIpConfIgmpVersionobsolete The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the …	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.5.1.3
rcIpConfIgmpQueryMaxResponseTimeobsolete The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.5.1.4
rcIpConfIgmpQuerierPresentTimeoutobsolete A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet to which this interface is attached.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 useDefaultAction 2 forward 3 drop 4 forwardToNextHop Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.5.1.5
rcIpConfIgmpLeaveEnabledobsolete An indication of whether the processing of IGMPv2 Leave messages is enabled on this interface.	SNMPv2-TCTruthValuer/w Enumerated Values: 0 none 1 ipTosRule1 2 ipTosRule2 3 ipTosRule3 Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.5.1.6
rcIpConfIgmpRowStatusobsolete Status of entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.5.1.7
rcIpConfIgmpRobustnessobsolete lossiness of network.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.5.1.8
rcIpConfIgmpLastMemberQueryIntervalobsolete max response in GrpSpec Query.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.8.5.1.9
rcIpConfIgmpSnoopEnableobsolete Enable snoop.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.5.1.10
rcIpConfIgmpProxySnoopEnableobsolete Enable proxy snoop.	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.5.1.11

rcIgmpGroupTable

table obsolete

.1.3.6.1.4.1.2272.1.8.6 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpGroupTable'

Copy

The (conceptual) table listing the multicast 
groups configured in the device.

rcIgmpGroupEntry row .1.3.6.1.4.1.2272.1.8.6.1

An entry (conceptual row) representing an
Igmp group.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpGroupIpAddressobsolete Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.8.6.1.1
rcIgmpGroupMembersobsolete IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.6.1.2
rcIgmpGroupInPortobsolete An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32 Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.6.1.3
rcIgmpGroupExpirationobsolete Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Constraints: range: 2-2	.1.3.6.1.4.1.2272.1.8.6.1.4
rcIgmpGroupIfIndexobsolete An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.6.1.5
rcIgmpGroupUserIdobsolete User-id sending this group	OctetString	.1.3.6.1.4.1.2272.1.8.6.1.6
rcIgmpGroupMemberStateobsolete Used for IGAP, to indicated member state.	Enumeration	.1.3.6.1.4.1.2272.1.8.6.1.7
rcIgmpGroupSessionTimeobsolete Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its values correspondes to the accounting …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.6.1.8

rcIpRouteTable

table

.1.3.6.1.4.1.2272.1.8.7 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRouteTable'

Copy

This entity's IP Routing table.

rcIpRouteEntry row .1.3.6.1.4.1.2272.1.8.7.1

A route to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.1
rcIpRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.2
rcIpRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.3
rcIpRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	SNMPv2-SMIInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.7.1.4
rcIpRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.5
rcIpRouteType The type of route.	Enumeration	.1.3.6.1.4.1.2272.1.8.7.1.6
rcIpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	Enumeration	.1.3.6.1.4.1.2272.1.8.7.1.7
rcIpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was l…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.8
rcIpRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.7.1.9
rcIpRoutePref	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.8.7.1.10
rcIpRouteAltSequence Alternative Route Sequence. 0 denotes Best Route.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.7.1.11
rcIpRoutePathType The type of route. It is a combination of direct, indirect, best, alternative and ECMP path.	Enumeration Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.8.7.1.12
rcIpRouteSrcVrfId srcVrfId of the next-hop address	VrfIdentifierr/w Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.8.7.1.13
rcIpRouteNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString	.1.3.6.1.4.1.2272.1.8.7.1.14
rcIpRouteLayer3VirtualInterfaceType Identifies type for value specified in the rcIpRouteLayer3VirtualInterface field.	Enumeration	.1.3.6.1.4.1.2272.1.8.7.1.15
rcIpRouteLayer3VirtualInterface Identifier of the Layer3 Virtual Interface. When the value is an SPB I-SID, 0 denotes GlobalRouter and -1 denotes not applicable to route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.16

rcIpConfDhcpTable

table

.1.3.6.1.4.1.2272.1.8.8 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfDhcpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfDhcpTable'

Copy

DHCP configuration table

rcIpConfDhcpEntry row .1.3.6.1.4.1.2272.1.8.8.1

Used to configure DHCP on a particular port. An
entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.

Once created this entry will only be deleted if the
rcIpConfDhcpRowSta…

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfDhcpIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.8.1.1
rcIpConfDhcpMaxHop Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server).	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.8.1.2
rcIpConfDhcpMinSec Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immedia…	Integer32r/w Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.8.1.3
rcIpConfDhcpMode Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.8.1.4
rcIpConfDhcpRowStatus An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.8.1.5
rcIpConfDhcpNumRequests The total number of DHCP requests seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.8.1.6
rcIpConfDhcpNumReplies The total number of DHCP replies seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.8.1.7
rcIpConfDhcpAlwaysBroadcast Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.8
rcIpConfDhcpClearCounters This object is used to clear the DHCP counters in an entry. When set to clear(1), the values of the counter objects in the entry will be reset to 0. When read, the value of this object is always dummy(2).	Enumerationr/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.8.1.9
rcIpConfDhcpCounterClearTime This object indicates the time at which the counter values in this entry were last reset to 0.	SNMPv2-TCTimeStamp Constraints: range: 256-256 Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.8.8.1.10
rcIpConfDhcpCircuitId Used to indicate if DHCP packets should have option82 circuitId info inserted before sent to servers, for this interface.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 permit 2 deny 3 none Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.11
rcIpConfDhcpRemoteId Used to indicate if DHCP packets should have option82 remoteId info inserted before sent to servers, for this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.12
rcIpConfDhcpTrusted Used to indicate if DHCP packets come through a trusted dhcp circuit. This means that packets with giaddr set to 0 having option82 in it, will be forwarded if the circuit is trusted.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.13
rcIpConfDhcpAgentAddr The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address	SNMPv2-SMIIpAddress Enumerated Values: 1 forward 2 drop 3 none Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.8.1.14

rcIpDhcpForwardTable

table

.1.3.6.1.4.1.2272.1.8.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpDhcpForwardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpDhcpForwardTable'

Copy

DHCP forwarding table.

rcIpDhcpForwardEntry row .1.3.6.1.4.1.2272.1.8.9.1

An entry used represents a DHCP forwarding directive.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpDhcpForwardAgentAddr The IP address configured on an interface (i.e., a locally configured IP address).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.9.1.1
rcIpDhcpForwardServerAddr The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP address is assigned to. This behavior is known as 'relay age…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.9.1.2
rcIpDhcpForwardEnable Used to indicate whether this entry should be used.	SNMPv2-TCTruthValuer/w Constraints: range: 3000-3127 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.9.1.3
rcIpDhcpForwardMode Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both.	Enumerationr/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.8.9.1.4
rcIpDhcpForwardRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 0 none 1 cse1k 2 cse2k 3 cse3k 4 bcm 5 meridianLineCard 6 meridianTrunkCard 7 msl100IP 8 vcon 9 minerva 10 useDefined Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.9.1.5

rcIpFilterTable

table

.1.3.6.1.4.1.2272.1.8.10.20 · 1 row entry · 46 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterTable'

Copy

A table containing IP filters.

rcIpFilterEntry row .1.3.6.1.4.1.2272.1.8.10.20.1

IP filter attributes.

The system supports a vast array of filter options.
Each of these options are supported in this entry.
If a particular option is not used, the column
should be set to zero.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterType Used to indicate a particular type of filter. A 'global' filter is a filter that is applied to all packets irregardless of the packet's source or destination IP address. A 'destination' f…	Enumeration Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.8.10.20.1.1
rcIpFilterDstAddr Destination IP address to filter on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.20.1.2
rcIpFilterDstMask Destination IP subnet mask to filter on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.20.1.3
rcIpFilterSrcAddr Source IP address to filter on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.20.1.4
rcIpFilterSrcMask Source IP subnet mask to filter on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.20.1.5
rcIpFilterId This filter's unique identifier(id). This id is automatically generated by the system when a filter is created. This id is used in the 'rcIpFilterGlobalListTable' and 'rcIpFilterBaseListTable' when grouping one or mo…	Integer32	.1.3.6.1.4.1.2272.1.8.10.20.1.6
rcIpFilterName This filter's name.	OctetStringr/w Constraints: range: 3000-3127	.1.3.6.1.4.1.2272.1.8.10.20.1.7
rcIpFilterProtocolType Type of protocol to filter on.	Enumerationr/w Constraints: range: 1-4	.1.3.6.1.4.1.2272.1.8.10.20.1.8
rcIpFilterSrcPort TCP/UDP source port to filter on.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2272.1.8.10.20.1.9
rcIpFilterSrcOption Type of matching to perform on the field 'rcIpFilterSrcPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'.	Enumerationr/w Enumerated Values: 6 tcp 17 udp	.1.3.6.1.4.1.2272.1.8.10.20.1.10
rcIpFilterDstPort TCP/UDP destination port to filter on.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.10.20.1.11
rcIpFilterDstOption Type of matching to perform on the field 'rcIpFilterDstPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'.	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.10.20.1.12
rcIpFilterCopyToCpuobsolete Used to specify whether a packet matching this filter should be copied to the CPU.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 src 2 dest 3 srcDest Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.13
rcIpFilterMirror Used to specify whether a packet matching this filter should be mirrored to the port specified by 'rcMirrorByPortMirrorPort'.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 signal 2 media Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.14
rcIpFilterHighPriorityobsolete Used to specify whether a packet matching this filter should be forwarded with high priority.	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.15
rcIpFilterTcpConnect Used to specify whether a TCP packet matching this filter should be accepted. Pass only those matching TCP packets with either the ACK bit or RST bit set. Apply only if the IP Protocol is set to TCP.	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.16
rcIpFilterIeeeVlanPriority Used to specify the priority bits for explicit IEEE VLAN tag for a packet matching this filter. If this priority bit field is greater than the priority field currently in the IEEE tag in the Packet Header, this priority…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.20.1.17
rcIpFilterUsePktLimitobsolete Used to specify whether the 'rcIpFilterPktLimit' field in this entry should be used when applying this filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.18
rcIpFilterPktLimitobsolete The maximum packet size limit to filter against.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.20.1.19
rcIpFilterRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.20.1.20
rcIpFilterMode Used to specify the operation mode for this entry. 'useDefaultAction' means use the setting specified in the 'rcIpFilterPortDefaultAction' variable. 'forward' means forward the packet if the packet sat…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.10.20.1.21
rcIpFilterIpTosRuleobsolete Used to specify the operation mode for this entry. 'none' means do not manupulate the Ip ToS byte. 'ipTosRule1' means manipulate the Ip ToS byte according to Quid/Gid Rule 1 which is defined in rcIpTosRuleOrRule1. '…	Enumerationr/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.10.20.1.22
rcIpFilterStopOnMatch Used to stop further filtering if this filter is applied.	SNMPv2-TCTruthValuer/w Constraints: range: 256-256 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.23
rcIpFilterDiffServMatchIeee8021PEnable Used to specify whether the value stored in the variable 'rcIpFilterDiffServMatchIeee8021P' should be used in this filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.24
rcIpFilterDiffServMatchIeee8021P Used to specify the match value for the 802.1P field. If the 802.1P field in the incoming packet matches this value, then this filter will be applied to the packet.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.20.1.25
rcIpFilterDiffServMatchDscpEnable Used to specify whether the values stored in the variable 'rcIpFilterDiffServMatchDscp' and 'rcIpFilterDiffServMatchDscpReserved' should be used in this filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.26
rcIpFilterDiffServMatchDscp Used to specify the match value for the DSCP. If the DSCP in the incoming packet matches this value, then this filter will be applied to the packet. The DSCP represents the high-order 6 bits of the TOS by…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.20.1.27
rcIpFilterDiffServMatchDscpReserved Used to specify the match value of the low-order 2 bits of the TOS byte (in network order).	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.20.1.28
rcIpFilterDiffServModifyIeee8021PEnable Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyIeee8021P' should be used in this filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.29
rcIpFilterDiffServModifyIeee8021P Used to specify the value the 802.1P field should be modified to if this filter is applied. The modification is applied at the egress point.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.10.20.1.30
rcIpFilterDiffServModifyDscpEnable Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyDscp' should be used in this filter.	SNMPv2-TCTruthValuer/w Constraints: range: 256-256 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.31
rcIpFilterDiffServModifyDscp Used to specify what the value of the DSCP should be modified to if this filter is applied. The modification is applied at the egress point. The DSCP represents the high-order 6 bits of the TOS byte (in n…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.20.1.32
rcIpFilterDiffServModifyDscpReserved Used to specify the modify value of the low-order 2 bits of the TOS byte (in network order).	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.20.1.33
rcIpFilterDiffServTrafficProfileId Used to specify which traffic profile should be applied to packets matching this filter. Traffic profiles are specified in the 'rc2kQosTrafficProfileTable' table. A '0' value means do not apply any traffic profile.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.20.1.34
rcIpFilterMatchIcmpRequest Used to specify whether matching on ICMP Request packets should be performed.	SNMPv2-TCTruthValuer/w Constraints: range: 1-1000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.35
rcIpFilterMatchIpFragment Used to specify whether matching on fragmented IP packets should be performed.	SNMPv2-TCTruthValuer/w Constraints: range: 0-15 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.36
rcIpFilterStatisticEnable Used to turn on/off Counters for this filter.	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.37
rcIpFilterInOctetsobsolete The number of In-Octets for this filter.	SNMPv2-SMICounter64 Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.10.20.1.38
rcIpFilterInPacketsobsolete The number of In-Packets for this filter.	SNMPv2-SMICounter64 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.10.20.1.39
rcIpFilterRateLimitDiscardPacketsobsolete The number of packets discarded due to rate limiting.	SNMPv2-SMICounter64 Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.10.20.1.40
rcIpFilterNextHopForwardIpAddr Next hop forward Ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.20.1.41
rcIpFilterNextHopUnreachableDropEnable If next hop is unreachalbe, enable/disable to drop the packet.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.20.1.42
rcIpFilterProtocolTypeUsrDefined When rcIpFilterProtocolType is set to usrDefined(256) in an IP Filter, this field represents the 8-bit user defined protocol identifier.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.20.1.43
rcIpFilterIngressOctets The number of In-Octets for this filter.	SNMPv2-SMICounter64 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.8.10.20.1.44
rcIpFilterIngressPkts The number of In-Packets for this filter.	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.10.20.1.45
rcIpFilterRateLimitDiscardPkts The number of packets discarded due to rate limiting.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.8.10.20.1.46

rcIpFilterGlobalListTable

table

.1.3.6.1.4.1.2272.1.8.10.21 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterGlobalListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterGlobalListTable'

Copy

A table used to store global filter list information.
Each row in the table contains a set of individual
filters that make up a particular filter list.

rcIpFilterGlobalListEntry row .1.3.6.1.4.1.2272.1.8.10.21.1

Global filter list attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterGlobalListId An unique value to identify a particular global filter list.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.21.1.1
rcIpFilterGlobalListName Name of this filter list.	OctetStringr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.21.1.2
rcIpFilterGlobalListFilterIdListSize Used to indicate the number of filters are associated with this filter list.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.21.1.3
rcIpFilterGlobalListFilterIdList Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.21.1.4
rcIpFilterGlobalListRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.21.1.5
rcIpFilterGlobalListMemberPorts Ports filter is used on.	PortSet Enumerated Values: 1 direct 2 static 4 rip 8 ospf 15 any Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.10.21.1.6

rcIpFilterBaseListTable

table

.1.3.6.1.4.1.2272.1.8.10.22 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterBaseListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterBaseListTable'

Copy

A table used to store base filter list information.
Each row in the table contains a set of individual
filters that make up a particular filter list.

rcIpFilterBaseListEntry row .1.3.6.1.4.1.2272.1.8.10.22.1

Base filter list attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterBaseListId An unique value to identify a particular base filter list.	Integer32 Enumerated Values: 1 type1 2 type2 3 external 4 internal 5 any	.1.3.6.1.4.1.2272.1.8.10.22.1.1
rcIpFilterBaseListName Name of this filter list.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.10.22.1.2
rcIpFilterBaseListFilterIdListSize Used to indicate the number of filters are associated with this filter list.	Integer32	.1.3.6.1.4.1.2272.1.8.10.22.1.3
rcIpFilterBaseListFilterIdList Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.22.1.4
rcIpFilterBaseListRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.22.1.5
rcIpFilterBaseListMemberPorts Ports filter is used on.	PortSet Constraints: range: 2001-3000	.1.3.6.1.4.1.2272.1.8.10.22.1.6

rcIpFilterPortTable

table

.1.3.6.1.4.1.2272.1.8.10.23 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterPortTable'

Copy

A table used to store port filtering information.

rcIpFilterPortEntry row .1.3.6.1.4.1.2272.1.8.10.23.1

Port entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterPortIfIndex IfIndex value of a port where filtering is applied.	InterfaceIndex Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.23.1.1
rcIpFilterPortFilterListSize Used to indicate the number of filter list(s) that are assigned to this port.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.23.1.2
rcIpFilterPortFilterList Used to indicate zero or more filter lists that are associated with this port. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.23.1.3
rcIpFilterPortModeobsolete Used to indicate when filters applied to this port should be treated as 'permit' or 'deny' filters. When filters are not enabled on the port the mode is set to none. The port does not block any packet. M…	Enumerationr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.23.1.4
rcIpFilterPortEnable Used to indicate whether filtering is configured on this port.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.23.1.5
rcIpFilterPortRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 direct 2 static 4 rip 7 any Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.23.1.6
rcIpFilterPortDefaultAction Used to indicate the default action that should be performed when an IP filter applies to a particular port. When filters are not enabled on the port the action is set to 'none' which means the port do…	Enumerationr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.23.1.7
rcIpFilterPortNumGlobalFilters # of global filters	SNMPv2-SMIInteger32 Enumerated Values: 1 announce 2 ignore Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.10.23.1.8
rcIpFilterPortNumBaseFilters # of base filters	SNMPv2-SMIInteger32 Enumerated Values: 1 type1 2 type2 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.10.23.1.9

rcIpFilterMediaDevTable

table

.1.3.6.1.4.1.2272.1.8.10.25 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterMediaDevTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterMediaDevTable'

Copy

A table used to store media filter list information.
Each row in the table contains a set of individual
filters that make up a particular filter list for 
a particular platform/device combination.

rcIpFilterMediaDevEntry row .1.3.6.1.4.1.2272.1.8.10.25.1

Device attributes and the filters' attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterMediaDevId Media Id in the rcIpFilterMediaDevTable.	Integer32	.1.3.6.1.4.1.2272.1.8.10.25.1.1
rcIpFilterMediaDevName Media Device Name. This includes the platform and the physical/soft device.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.25.1.2
rcIpFilterMediaDevPlatformType Platform identifier or type. These are the currently supported platforms.	Enumerationr/w Constraints: range: 4001-5000	.1.3.6.1.4.1.2272.1.8.10.25.1.3
rcIpFilterMediaDevDeviceType Device identifier or type. There are the currently supported device types.	Enumerationr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.10.25.1.4
rcIpFilterMediaDevIpAddress Media Device IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.10.25.1.5
rcIpFilterMediaDevStreamsIds An array used to identify which streams are assigned to MediaDevEntry. Each stream ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the stream ID, while the second octet holds bits 7-0…	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.25.1.6
rcIpFilterMediaDevMemberPorts Media Device port port members. These are the system physical ports.	PortSet Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.25.1.7
rcIpFilterMediaDevStatisticEnable Used to turn on/off statistics' counters for all the filters for the device.	SNMPv2-TCTruthValuer/w Constraints: range: 0-1000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.10.25.1.8
rcIpFilterMediaDevRowStatus Row Status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.25.1.9

rcIpFilterMediaStreamTable

table

.1.3.6.1.4.1.2272.1.8.10.27 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpFilterMediaStreamTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpFilterMediaStreamTable'

Copy

A table used to store tcp/udp port information
for a set of filters that make up a particular
filter list for a particular platform/device 
combination.

rcIpFilterMediaStreamEntry row .1.3.6.1.4.1.2272.1.8.10.27.1

Layer 4 Port attributes and the filters' attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpFilterMediaStreamMediaId Media Id in the rcIpFilterMediaDevTable.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.27.1.1
rcIpFilterMediaStreamStreamId Port range Id in the rcIpFilterMediaStreamTable.	Integer32	.1.3.6.1.4.1.2272.1.8.10.27.1.2
rcIpFilterMediaStreamName Media Stream Name.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.10.27.1.3
rcIpFilterMediaStreamProtocol Type of transport protocol to filter on. Multimedia applications often use UDP and some use TCP. Any Layer 4 protocol number supported by IP can be added here in future.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.10.27.1.4
rcIpFilterMediaStreamPortMin TCP/UDP source or destination port to filter on.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.10.27.1.5
rcIpFilterMediaStreamPortMax TCP/UDP source or destination port to filter on.	Integer32r/w Constraints: range: 6001-7000	.1.3.6.1.4.1.2272.1.8.10.27.1.6
rcIpFilterMediaStreamPortOption Src port or destination port of both.	Enumerationr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.10.27.1.7
rcIpFilterMediaStreamType Type of stream to filter on.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.10.27.1.8
rcIpFilterMediaStreamRemarkDscp Used to specify what the value of the DSCP should be modified to if this stream is identified. The modification is applied at the egress point. The DSCP represents the high-order 6 bits of the TOS byte (in network order…	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.27.1.9
rcIpFilterMediaStreamMatchDscp Used to specify what the value of the DSCP should be match with in the stream identification. DSCP represents the high-order 6 bit of the TOS byte (in network order).	OctetStringr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.10.27.1.10
rcIpFilterMediaStreamRowStatus Row Status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.10.27.1.11

rcIpPolicyAddrTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyAddrTable'

Copy

A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.

rcIpPolicyAddrEntry row .1.3.6.1.4.1.2272.1.8.11.2.1

Route entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyAddrIpAddrobsolete The network address for this type of list entry. This value is required for all types of lists.	SNMPv2-SMIIpAddress Enumerated Values: 1 type1 2 type2 3 any Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.2.1.1
rcIpPolicyAddrIdobsolete Identifier of this entry. Used internally to identify this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.11.2.1.2
rcIpPolicyAddrAddrListIdListSizeobsolete Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable.	Integer32	.1.3.6.1.4.1.2272.1.8.11.2.1.3
rcIpPolicyAddrAddrListIdListobsolete Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to ze…	OctetString	.1.3.6.1.4.1.2272.1.8.11.2.1.4
rcIpPolicyAddrRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-1000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.2.1.5

rcIpPolicyNetTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyNetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyNetTable'

Copy

A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.

rcIpPolicyNetEntry row .1.3.6.1.4.1.2272.1.8.11.4.1

Route entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyNetAddrobsolete The network address for this type of list entry. This value is required for all types of lists.	SNMPv2-SMIIpAddress Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.4.1.1
rcIpPolicyNetMaskobsolete The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For other types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddress Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.4.1.2
rcIpPolicyNetIdobsolete Used internally to recognize this entry.	SNMPv2-SMIInteger32 Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.4.1.3
rcIpPolicyNetNetListIdListSizeobsolete Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable.	Integer32	.1.3.6.1.4.1.2272.1.8.11.4.1.4
rcIpPolicyNetNetListIdListobsolete Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to ze…	OctetString	.1.3.6.1.4.1.2272.1.8.11.4.1.5
rcIpPolicyNetRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.4.1.6

rcIpPolicyAddrListTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.6 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyAddrListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyAddrListTable'

Copy

A table used to group rcIpPolicyAddrEntry(s) 
into a list.

rcIpPolicyAddrListEntry row .1.3.6.1.4.1.2272.1.8.11.6.1

Route entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyAddrListIdobsolete A value that uniquely identifies this list of rcIpPolicyAddrListEntry.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.2272.1.8.11.6.1.1
rcIpPolicyAddrListNameobsolete An administratively-assigned name for this list.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.6.1.3
rcIpPolicyAddrListIdListSizeobsolete Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable.	Integer32	.1.3.6.1.4.1.2272.1.8.11.6.1.4
rcIpPolicyAddrListIdListobsolete Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.6.1.5
rcIpPolicyAddrListPolicyIdListSizeobsolete Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.	Integer32	.1.3.6.1.4.1.2272.1.8.11.6.1.6
rcIpPolicyAddrListPolicyIdListobsolete Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetString	.1.3.6.1.4.1.2272.1.8.11.6.1.7
rcIpPolicyAddrListRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.6.1.8

rcIpPolicyRipAnnounceTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.8 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyRipAnnounceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyRipAnnounceTable'

Copy

A table used to store set of announce policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyRipAnnounceEntry row .1.3.6.1.4.1.2272.1.8.11.8.1

Entry containing configuration information for a
particular announce policy.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyRipAnnounceIdobsolete A value that uniquely identifies the policy associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.8.11.8.1.1
rcIpPolicyRipAnnounceNameobsolete An administratively-assigned name for this policy.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.8.1.2
rcIpPolicyRipAnnounceEnableobsolete It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Constraints: range: 1-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.8.1.3
rcIpPolicyRipAnnounceExactNetListIdobsolete Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.8.11.8.1.4
rcIpPolicyRipAnnounceRangeNetListIdobsolete Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.5
rcIpPolicyRipAnnounceRipGatewayListIdobsolete Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.6
rcIpPolicyRipAnnounceRipInterfaceListIdobsolete Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.7
rcIpPolicyRipAnnounceOspfRouterListIdobsolete Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF is included as a RouteSource. The list cont…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.11.8.1.8
rcIpPolicyRipAnnounceAnnounceInterfaceListIdobsolete Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addresses. If the outbound interface address in t…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.9
rcIpPolicyRipAnnouncePrecedenceobsolete Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.10
rcIpPolicyRipAnnounceRouteSourceobsolete Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will ma…	Enumerationr/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.8.1.11
rcIpPolicyRipAnnounceAdvertiseNetListIdobsolete Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks tha…	Integer32r/w Constraints: range: 64-64	.1.3.6.1.4.1.2272.1.8.11.8.1.12
rcIpPolicyRipAnnounceActionobsolete It indicates whether the route should be announced or not.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.11.8.1.13
rcIpPolicyRipAnnounceOspfRouteTypeobsolete Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this policy to only type2 OSPF external routes. 'internal' means '…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.11.8.1.14
rcIpPolicyRipAnnounceRipMetricobsolete RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. If set to zero, the routing table metric calculated…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.8.1.15
rcIpPolicyRipAnnounceRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.8.1.16

rcIpPolicyOspfAnnounceTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.10 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyOspfAnnounceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyOspfAnnounceTable'

Copy

A table used to store set of announce policies 
configured for OSPF routing protocol. The Number
of entries is given by rcIpPolicyNumOspfPolicies.

rcIpPolicyOspfAnnounceEntry row .1.3.6.1.4.1.2272.1.8.11.10.1

Entry containing configuration information for a
particular announce policy.

Indexes

rcIpUdpPortFwdListId

Column	Syntax	OID
rcIpPolicyOspfAnnounceIdobsolete A value that uniquely identifies the policy associated with this entry.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.1
rcIpPolicyOspfAnnounceNameobsolete An administratively-assigned name for this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.10.1.2
rcIpPolicyOspfAnnounceEnableobsolete It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Constraints: range: 0-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.10.1.3
rcIpPolicyOspfAnnounceExactNetListIdobsolete Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match …	Integer32r/w Constraints: range: 128-128	.1.3.6.1.4.1.2272.1.8.11.10.1.4
rcIpPolicyOspfAnnounceRangeNetListIdobsolete Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & m…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.10.1.5
rcIpPolicyOspfAnnounceRipGatewayListIdobsolete Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.10.1.6
rcIpPolicyOspfAnnounceRipInterfaceListIdobsolete Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list c…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.10.1.7
rcIpPolicyOspfAnnouncePrecedenceobsolete Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.10.1.8
rcIpPolicyOspfAnnounceRouteSourceobsolete Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will m…	Enumerationr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.9
rcIpPolicyOspfAnnounceAdvertiseNetListIdobsolete Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks tha…	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.2272.1.8.11.10.1.10
rcIpPolicyOspfAnnounceActionobsolete It indicates whether the route should be announced or not.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.11.10.1.11
rcIpPolicyOspfAnnounceExtMetricTypeobsolete Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2' means the ospf-metric is equal to 'type2'.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.11.10.1.12
rcIpPolicyOspfAnnounceExtMetricobsolete OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. Value '0' is used to indicate that route…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.10.1.13
rcIpPolicyOspfAnnounceRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.10.1.14

rcIpPolicyRipAcceptTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.12 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyRipAcceptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyRipAcceptTable'

Copy

A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyRipAcceptEntry row .1.3.6.1.4.1.2272.1.8.11.12.1

Entry containing configuration information for a
particular accept policy.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyRipAcceptIdobsolete A value that uniquely identifies the policy associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.8.11.12.1.1
rcIpPolicyRipAcceptNameobsolete An administratively-assigned name for this policy.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.12.1.2
rcIpPolicyRipAcceptEnableobsolete It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.12.1.3
rcIpPolicyRipAcceptExactNetListIdobsolete Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.12.1.4
rcIpPolicyRipAcceptRangeNetListIdobsolete Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.12.1.5
rcIpPolicyRipAcceptRipGatewayListIdobsolete Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that could send RIP updates to this router. If a router addre…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.12.1.6
rcIpPolicyRipAcceptRipInterfaceListIdobsolete Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or more interfaces on this router. If an interface address i…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.11.12.1.7
rcIpPolicyRipAcceptPrecedenceobsolete Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.12.1.8
rcIpPolicyRipAcceptActionobsolete It indicates whether the route should be acceptd or not.	Enumerationr/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.11.12.1.9
rcIpPolicyRipAcceptInjectNetListIdobsolete Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that di…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.12.1.10
rcIpPolicyRipAcceptApplyMaskobsolete If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network number from the RIP update. This is used to override the …	SNMPv2-SMIIpAddressr/w Enumerated Values: 0 inactive 1 active Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.12.1.11
rcIpPolicyRipAcceptRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.12.1.12

rcIpPolicyOspfAcceptTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.14 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyOspfAcceptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyOspfAcceptTable'

Copy

A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyOspfAcceptEntry row .1.3.6.1.4.1.2272.1.8.11.14.1

Entry containing configuration information for a
particular accept policy.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyOspfAcceptIdobsolete A value that uniquely identifies the policy associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.8.11.14.1.1
rcIpPolicyOspfAcceptNameobsolete An administratively-assigned name for this policy.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.14.1.2
rcIpPolicyOspfAcceptEnableobsolete It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.14.1.3
rcIpPolicyOspfAcceptExactNetListIdobsolete Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.14.1.4
rcIpPolicyOspfAcceptRangeNetListIdobsolete Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.14.1.5
rcIpPolicyOspfAcceptPrecedenceobsolete Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.11.14.1.6
rcIpPolicyOspfAcceptActionobsolete It indicates whether the route should be acceptd or not.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.11.14.1.7
rcIpPolicyOspfAcceptInjectNetListIdobsolete Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that di…	Integer32r/w Enumerated Values: 1 dense 2 sparse 3 sparseDense 4 ssm	.1.3.6.1.4.1.2272.1.8.11.14.1.8
rcIpPolicyOspfAcceptExtTypeobsolete Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any external type 1'. 'type2' means…	Enumerationr/w Constraints: range: 0-18724	.1.3.6.1.4.1.2272.1.8.11.14.1.9
rcIpPolicyOspfAcceptRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-18724 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.14.1.10

rcIpPolicyNetListTable

table obsolete

.1.3.6.1.4.1.2272.1.8.11.16 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPolicyNetListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPolicyNetListTable'

Copy

A table used to group rcIpPolicyAddrEntry(s) 
into a list.

rcIpPolicyNetListEntry row .1.3.6.1.4.1.2272.1.8.11.16.1

Route entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPolicyNetListIdobsolete A value that uniquely identifies this list of rcIpPolicyNetListEntry.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.8.11.16.1.1
rcIpPolicyNetListNameobsolete An administratively-assigned name for this list.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.16.1.3
rcIpPolicyNetListIdListSizeobsolete Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable.	Integer32	.1.3.6.1.4.1.2272.1.8.11.16.1.4
rcIpPolicyNetListIdListobsolete Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.11.16.1.5
rcIpPolicyNetListPolicyIdListSizeobsolete Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.	Integer32 Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.11.16.1.6
rcIpPolicyNetListPolicyIdListobsolete Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetString Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.2272.1.8.11.16.1.7
rcIpPolicyNetListRowStatusobsolete Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.16.1.8

rcIpDvmrpTable

table

.1.3.6.1.4.1.2272.1.8.12.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpDvmrpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpDvmrpTable'

Copy

Dvmrp Interface extension table.  This table
augments the standard dvmrpInterfaceTable defined
in <draft-thaler-dvmrp-mib-09.txt>.

rcIpDvmrpTableEntry row .1.3.6.1.4.1.2272.1.8.12.2.1

Entry containing Proprietary DVMRP interface
information. An entry is automatically created
in this table when an ip address is configured on
an interface.

Indexes

rcIpPimStaticRPGroupAddress rcIpPimStaticRPGroupMask rcIpPimStaticRPAddress

Column	Syntax	OID
rcIpDvmrpTableIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.12.2.1.1
rcIpDvmrpTableEnable The administrative status of DVMRP in the router. The value 'enabled' denotes that the DVMRP is enableed on the interface; 'disabled' disables it on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.12.2.1.2
rcIpDvmrpTableMetric Dvmrp cost on this interface.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.12.2.1.3
rcIpDvmrpTableAdvSelf Used to indicate whether the switch can advertise this local network	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.12.2.1.4
rcIpDvmrpTableLocalAddr The IP address of this interface.	SNMPv2-SMIIpAddress Enumerated Values: 1 valid 2 invalid Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.12.2.1.5
rcIpDvmrpTableInPolicyName Dvmrp Accept Policy name that is configured on this interface.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.12.2.1.6
rcIpDvmrpTableOutPolicyName Dvmrp Announce Policy name that is configured on this interface.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.12.2.1.7
rcIpDvmrpTableDefRtLis Used to indicate whether the switch can learn DVMRP default route over this interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.12.2.1.8
rcIpDvmrpTableDefRtSup Used to indicate whether the switch should supply DVMRP default route over this interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.12.2.1.9
rcIpDvmrpTableDefRtMet Used to specify the cost of the DVMRP default route that this interface generates and supplies when it is configured to supply default route	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.12.2.1.10
rcIpDvmrpTableInterfaceType Dvmrp Interface type	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.12.2.1.11

rcIpUdpProtocolTable

table

.1.3.6.1.4.1.2272.1.8.13.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpUdpProtocolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpUdpProtocolTable'

Copy

list of UDP protocols. Used to determine whether to
forward the UDP broadcast packet or not.

rcIpUdpProtocolEntry row .1.3.6.1.4.1.2272.1.8.13.2.1

Used to include a particular UDP port in the table.
An entry in this table indicates that the box might do
forwarding of UDP broadcast packets if there is a
matching entry for this packet in the
rcIpUdpPortFwdTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpUdpProtocolPortNumber well-known UDP Port number. Pre-assigned port number for this protocol. Port used by the server process as its contact port. It cannot be BOOTP/DHCP port#s 67, 68.	Integer32	.1.3.6.1.4.1.2272.1.8.13.2.1.1
rcIpUdpProtocolName Used to indicate the name of the protocol that is running on top of UDP protocol. cannot change the name once created. This should be set while creating the entry.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.13.2.1.2
rcIpUdpProtocolRowStatus Rowstatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.13.2.1.3

rcIpUdpPortFwdTable

table

.1.3.6.1.4.1.2272.1.8.13.4 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpUdpPortFwdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpUdpPortFwdTable'

Copy

Udp forward entry table.

rcIpUdpPortFwdEntry row .1.3.6.1.4.1.2272.1.8.13.4.1

An entry is configured to specify forwarding policy
parameters.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpUdpPortFwdDestPort The well-known port number defined for UDP/TCP depending on the value of IpProtoType field in this entry. This port number has to be defined in the rcIpUdpProtoTable. In order to select this policy the destination por…	Integer32	.1.3.6.1.4.1.2272.1.8.13.4.1.1
rcIpUdpPortFwdDestAddr Destination IP address. The IP addres to which the UDP/TCP broadcast should be forwarded. This IP address can be any IP server address or subnet broadcast address. If the IP address is one of the routable interface…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.13.4.1.2
rcIpUdpPortFwdId Identifier of this entry. Used internally to identify this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.13.4.1.3
rcIpUdpPortFwdFwdListIdListSize Used to indicate the number of id(s) in the rcIpUdpPortFwdListId variable.	Integer32	.1.3.6.1.4.1.2272.1.8.13.4.1.4
rcIpUdpPortFwdFwdListIdList Used to indicate zero or more rcIpUdpPortFwdListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetString	.1.3.6.1.4.1.2272.1.8.13.4.1.5
rcIpUdpPortFwdNumFwdPackets The total number of UDP/TCP broadcast packets forwarded using this policy.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.4.1.6
rcIpUdpPortFwdNumDropPacketsTtlExpired The total number of UDP/TCP broadcast packets dropped because the TTL has expired.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.4.1.7
rcIpUdpPortFwdNumDropPacketsDestUnreach The total number of UDP/TCP broadcast packets dropped because the rcIpUdpPortFwdDestAddr specified in this policy was unreachable.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.4.1.8
rcIpUdpPortFwdRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.13.4.1.9

rcIpUdpPortFwdListTable

table

.1.3.6.1.4.1.2272.1.8.13.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpUdpPortFwdListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpUdpPortFwdListTable'

Copy

A table used to group rcIpUdpPortFwdEntry(s) 
into a list.

rcIpUdpPortFwdListEntry row .1.3.6.1.4.1.2272.1.8.13.6.1

Route entry attributes.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpUdpPortFwdListId A value that uniquely identifies this list of rcIpUdpPortFwdListEntry.	Integer32	.1.3.6.1.4.1.2272.1.8.13.6.1.1
rcIpUdpPortFwdListName An administratively-assigned name for this list.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.13.6.1.3
rcIpUdpPortFwdListFwdIdListSize Used to indicate the number of rcIpUdpPortFwdNetEntry id(s) in the rcIpUdpPortFwdListIdList variable.	Integer32	.1.3.6.1.4.1.2272.1.8.13.6.1.4
rcIpUdpPortFwdListFwdIdList Used to indicate zero or more UdpPortFwd entries that are associated to this list. Each entry identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.13.6.1.5
rcIpUdpPortFwdListRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.13.6.1.6

rcIpUdpConfBroadcastIntfTable

table

.1.3.6.1.4.1.2272.1.8.13.8 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpUdpConfBroadcastIntfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpUdpConfBroadcastIntfTable'

Copy

IP broadcast forward configuration table

rcIpUdpConfBroadcastIntfEntry row .1.3.6.1.4.1.2272.1.8.13.8.1

Used to configure UDP broadcast forward on a
particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpUdpConfBroadcastIntfLocalIfAddr The ip address of the local interface that is partipating in the forwarding UDP broadcast packets.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.13.8.1.1
rcIpUdpConfBroadcastIntfUdpPortFwdListId Used to indicate the number UDP ports that this interface is configured to forward. A value of '0' indicates that this interface will not forward any UDP broadcast packets. This is a required field to cr…	Integer32r/w	.1.3.6.1.4.1.2272.1.8.13.8.1.2
rcIpUdpConfBroadcastIntfMaxTtl Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.13.8.1.3
rcIpUdpConfBroadcastIntfNumRxPkts The total number of UDP/TCP broadcast packets received by this local interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.8.1.4
rcIpUdpConfBroadcastIntfNumFwdPkts The total number of UDP/TCP broadcast packets forwarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.8.1.5
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired The total number of UDP/TCP broadcast packets dropped because the TTL has expired.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.8.1.6
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach The total number of UDP broadcast packets dropped because the destination was unreachable.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.8.1.7
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort The total number of UDP/TCP broadcast packets dropped because the destination port/protocol specified has no matching forwarding policy.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.13.8.1.8
rcIpUdpConfBroadcastIntfRowStatus Entry row status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-360 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.13.8.1.9
rcIpUdpConfBroadcastIntfBroadCastMask The subnet mask of the local interface that is used for broadcasting the UDP broadcast packets.	SNMPv2-SMIIpAddressr/w Constraints: range: 15-259200	.1.3.6.1.4.1.2272.1.8.13.8.1.10

rcIpStaticRouteTable

table

.1.3.6.1.4.1.2272.1.8.15.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpStaticRouteTable'

Copy

This table is used to add static IP routes to
the device.  Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic.

rcIpStaticRouteEntry row .1.3.6.1.4.1.2272.1.8.15.2.1

A static route to a particular destination.

Indexes

rcIpMulticastTimedPruneGroupAddress rcIpMulticastTimedPruneSourceAddress rcIpMulticastTimedPruneSrcSubnetMask

Column	Syntax	OID
rcIpStaticRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.1
rcIpStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.2
rcIpStaticRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.3
rcIpStaticRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.15.2.1.4
rcIpStaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	Integer32	.1.3.6.1.4.1.2272.1.8.15.2.1.5
rcIpStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.15.2.1.6
rcIpStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.15.2.1.7
rcIpStaticRouteStatus Used to indicate the current status of this entry.	Enumeration	.1.3.6.1.4.1.2272.1.8.15.2.1.8
rcIpStaticRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.15.2.1.9
rcIpStaticRouteLocalNextHop Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or…	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.15.2.1.10

rcIpStaticRouteBfdTable

table

.1.3.6.1.4.1.2272.1.8.15.4 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpStaticRouteBfdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpStaticRouteBfdTable'

Copy

This table is used to hold next hop addresses on which BFD is enabled.

rcIpStaticRouteBfdEntry row .1.3.6.1.4.1.2272.1.8.15.4.1

An IP address of the next hop of the BFD session.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpStaticRouteBfdNextHop The IP address of the next hop of the BFD session.	SNMPv2-SMIIpAddress Constraints: range: 4-9000	.1.3.6.1.4.1.2272.1.8.15.4.1.1
rcIpStaticRouteBfdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 4-1800 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.15.4.1.2

rcIpPimTable

table

.1.3.6.1.4.1.2272.1.8.16.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPimTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPimTable'

Copy

IP Pim table

rcIpPimEntry row .1.3.6.1.4.1.2272.1.8.16.2.1

An entry of Ip Pim Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPimIfIndex port	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.16.2.1.1
rcIpPimEnable enable interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.16.2.1.2
rcIpPimMode	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.16.2.1.3
rcIpPimHelloInterval frq. at which hello sent.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.16.2.1.4
rcIpPimJoinPruneInterval	Integer32r/w	.1.3.6.1.4.1.2272.1.8.16.2.1.5
rcIpPimCBSRPreference	Integer32r/w	.1.3.6.1.4.1.2272.1.8.16.2.1.6
rcIpPimIntfType Pim interface type.	Enumerationr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.16.2.1.7
rcIpPimPruneDelay Pim Prune Delay.	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.8.16.2.1.8

rcIpPimInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.16.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPimInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPimInterfaceTable'

Copy

IP Pim table

rcIpPimInterfaceEntry row .1.3.6.1.4.1.2272.1.8.16.3.1

An entry of Ip Pim Interface Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPimInterfaceIfIndex port	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.16.3.1.1
rcIpPimInterfaceOperState The current operational state of this PIM interface. This object is deprecated in favor of ifOperStatus.	Enumeration	.1.3.6.1.4.1.2272.1.8.16.3.1.2
rcIpPimInterfaceType Pim interface type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.16.3.1.3
rcIpPimInterfaceCBSREnable Enable/disable Candidate BSR on pim local interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.16.3.1.4

rcIpPimStaticRPTable

table

.1.3.6.1.4.1.2272.1.8.16.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPimStaticRPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPimStaticRPTable'

Copy

The table lists all the RPs configured statically for
various IP multicast groups.

rcIpPimStaticRPEntry row .1.3.6.1.4.1.2272.1.8.16.4.1

An entry (conceptual row) in the rcIpPimStaticRPTable.

Indexes

rcIpMrouteHwSourcesGroupAddress rcIpMrouteHwSourcesSubnet rcIpMrouteHwSourcesInvlan rcIpMrouteHwSourcesAddress

Column	Syntax	OID
rcIpPimStaticRPGroupAddress The IP multicast group address which, when combined with rcIpPimStaticRPGroupMask, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.16.4.1.1
rcIpPimStaticRPGroupMask The multicast group address mask which, when combined with rcIpPimStaticRPGroupAddress, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.16.4.1.2
rcIpPimStaticRPAddress The (unicast) address of the static-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.16.4.1.3
rcIpPimStaticRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.16.4.1.4
rcIpPimStaticRPStatus The status of StaticRP.	Enumeration	.1.3.6.1.4.1.2272.1.8.16.4.1.5

rcIpPimVirtualNbrTable

table

.1.3.6.1.4.1.2272.1.8.16.6 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPimVirtualNbrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPimVirtualNbrTable'

Copy

Table listing the router's virtual PIM neighbors

rcIpPimVirtualNbrEntry row .1.3.6.1.4.1.2272.1.8.16.6.1

An entry in the virtual PIM neighbors' table.

Indexes

rcIpMrouteHwEgressVlansGroupAddress rcIpMrouteHwEgressVlansSubnet rcIpMrouteHwEgressVlansInvlan rcIpMrouteHwEgressVlansId rcIpMrouteHwEgressVlansIndex

Column	Syntax	OID
rcIpPimVirtualNbrAddress The IP address of the virtual PIM neighbor for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.16.6.1.1
rcIpPimVirtualNbrIfIndex The value of ifIndex for the PIM interface in which this virtual neighbor is created. This value is mandatory while trying to create a virtual PIM neighbor.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.16.6.1.2
rcIpPimVirtualNbrRowStatus To create/delete an entry in the virtual PIM neighbors' table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.16.6.1.3

rcIpPimActiveRPTable

table

.1.3.6.1.4.1.2272.1.8.16.7 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPimActiveRPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPimActiveRPTable'

Copy

The table lists the RPs being used for the active IP multicast groups.

rcIpPimActiveRPEntry row .1.3.6.1.4.1.2272.1.8.16.7.1

An entry in the rcIpPimActiveRPTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPimActiveRPGroupAddress The active IP multicast group address	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.16.7.1.1
rcIpPimActiveRPAddress The address of the RP for the active multicast group	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.16.7.1.2
rcIpPimActiveRPPriority The priority of the RP.	Integer32	.1.3.6.1.4.1.2272.1.8.16.7.1.3

rcIpMulticastArpTable

table

.1.3.6.1.4.1.2272.1.8.17 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMulticastArpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMulticastArpTable'

Copy

IP Multicast Arp table

rcIpMulticastArpEntry row .1.3.6.1.4.1.2272.1.8.17.1

An entry of Ip Multicast Arp Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMulticastArpVlanId vlan id	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.17.1.1
rcIpMulticastArpMacAddress multicast mac address	SNMPv2-TCMacAddress Constraints: range: 0-3600 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.17.1.2
rcIpMulticastArpIpAddress multicast ip address	SNMPv2-SMIIpAddress Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.17.1.3
rcIpMulticastArpPorts ports within a particular vlan	PortSetr/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.17.1.4
rcIpMulticastArpNumMltIds number of mlt ids	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.17.1.5
rcIpMulticastArpMltIds mlt id	IdListr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.17.1.6
rcIpMulticastArpRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.17.1.7

rcIpMulticastTable

table obsolete

.1.3.6.1.4.1.2272.1.8.18 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMulticastTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMulticastTable'

Copy

Ip multicast table.

rcIpMulticastEntry row .1.3.6.1.4.1.2272.1.8.18.1

Entry containing Proprietary Ip Multicast information.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMulticastIfIndexobsolete IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.18.1.1
rcIpMulticastMulticastIpobsolete IP Address on this IfIndex to be used for all Multicast protocols running on this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.18.1.2

rcIpRipInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.20.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRipInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRipInterfaceTable'

Copy

IP Rip Interface table

rcIpRipInterfaceEntry row .1.3.6.1.4.1.2272.1.8.20.1.1

An entry of Ip Rip Interface Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRipInterfaceAddress Ip Address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.20.1.1.1
rcIpRipInterfaceIfIndex Rip Interface If Index.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.20.1.1.2
rcIpRipInterfaceRipEnable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.20.1.1.3
rcIpRipInterfaceAccDefRte	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.4
rcIpRipInterfaceAdvDefRte	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.5
rcIpRipInterfaceAutoAggregate	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.6
rcIpRipInterfaceCost	SNMPv2-SMIInteger32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.20.1.1.7
rcIpRipInterfaceListen	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 range: 9999-9999 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.8
rcIpRipInterfacePoison	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.9
rcIpRipInterfaceSupply	SNMPv2-TCTruthValuer/w Enumerated Values: 1 up 2 down Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.10
rcIpRipInterfaceTriggeredUpdate	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.11
rcIpRipInterfaceInPolicy	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.20.1.1.12
rcIpRipInterfaceOutPolicy	SNMPv2-TCDisplayStringr/w Constraints: range: 1-4093 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.20.1.1.13
rcIpRipInterfaceProxyAnnounceFlag	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.14
rcIpRipInterfaceHolddown Used to indicate the rip holddown timer for this interface	Integer32r/w	.1.3.6.1.4.1.2272.1.8.20.1.1.15
rcIpRipInterfaceTimeout Used to indicate the rip timeout interval for this interface	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.20.1.1.16

rcIpMulticastTimedPruneTable

table

.1.3.6.1.4.1.2272.1.8.21 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMulticastTimedPruneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMulticastTimedPruneTable'

Copy

This feature provides the ability for the user to 
create (S,G)  Forwarding Entries that would not be
pruned until a configurable timer expires. This feature 
is targeted for Passport 8600. Currently
the timer value is set to 0.

rcIpMulticastTimedPruneEntry row .1.3.6.1.4.1.2272.1.8.21.1

An entry of Ip Multicast Timed Prune Table.

Indexes

rcIpRsmltEdgeVlanId

Column	Syntax	OID
rcIpMulticastTimedPruneGroupAddress This field indicates the IP Multicast Group Address associated with the IP multicast stream.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.21.1.1
rcIpMulticastTimedPruneSourceAddress This is the Source Subnet IP address of the sender of the IP multicast stream.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.21.1.2
rcIpMulticastTimedPruneSrcSubnetMask This is the Source Subnet Mask IP address of the sender of the IP multicast stream.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.21.1.3
rcIpMulticastTimedPruneAgingTimer This field represents the amount of time (in minutes) this timed prune entry will be kept in the forwarding table when there are no more receivers. After this timer expires, this timed prune entry would be treated a…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.21.1.4
rcIpMulticastTimedPruneTimeLeft This read-only field represents the remaining time for which this timed prune entry will be kept in the forwarding table. After this timer expires, this timed prune entry would be treated as a normal DVMRP/PIM forwar…	SNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.21.1.5
rcIpMulticastTimedPruneLastActivity This read-only field represents the actual time since the traffic has come from this Source, Group pair.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.21.1.6
rcIpMulticastTimedPruneRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.21.1.7

rcIpConfIcmpRdiscTable

table

.1.3.6.1.4.1.2272.1.8.22 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpConfIcmpRdiscTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpConfIcmpRdiscTable'

Copy

A table used to maintain ICMP Route discovery information
for a particular interface.

rcIpConfIcmpRdiscEntry row .1.3.6.1.4.1.2272.1.8.22.1

Entry containing ICMP Rdisc information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpConfIcmpRdiscIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.22.1.1
rcIpConfIcmpRdiscAdvAddress Advertisement address to which the route discovery advertisements transmitted on this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.22.1.2
rcIpConfIcmpRdiscAdvFlag Flag to indicate whether or not the address is to be advertised on this interface.	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.22.1.3
rcIpConfIcmpRdiscAdvLifetime The value to be placed in the lifetime field of Router Advertisements sent from the interface.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.22.1.4
rcIpConfIcmpRdiscMaxAdvInterval The maximum time allowed between sending Router Advertisements from this interface.	Integer32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.22.1.5
rcIpConfIcmpRdiscMinAdvInterval The minimum time allowed between sending Router Advertisements from this interface.	Integer32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.22.1.6
rcIpConfIcmpRdiscPreferenceLevel Preferability of the router address as a default Router	Integer32r/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.22.1.7

rcIpMrouteHwTable

table

.1.3.6.1.4.1.2272.1.8.24.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMrouteHwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMrouteHwTable'

Copy

The (conceptual) table containing hardware entries of
multicast routing information for all the Group Address.

rcIpMrouteHwEntry row .1.3.6.1.4.1.2272.1.8.24.1.1

An entry (conceptual row) containing hardware entries of
multicast routing information for a particular Group
Address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMrouteHwGroupAddress The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.24.1.1.1
rcIpMrouteHwSubnet The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.1.1.2
rcIpMrouteHwInvlan The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.8.24.1.1.3
rcIpMrouteHwPruned This is to show weather the entry containing multicast routing information has received Prune message or not.	SNMPv2-TCTruthValue Constraints: range: 0-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.24.1.1.4
rcIpMrouteHwIndex This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information.	Integer32	.1.3.6.1.4.1.2272.1.8.24.1.1.5

rcIpMrouteHwPrunesTable

table

.1.3.6.1.4.1.2272.1.8.24.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMrouteHwPrunesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMrouteHwPrunesTable'

Copy

The (conceptual) table containing prune entries of
multicast routing information for the Group Address.

rcIpMrouteHwPrunesEntry row .1.3.6.1.4.1.2272.1.8.24.2.1

An entry (conceptual row) containing prune entries of
multicast routing information for a particular Group
Address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMrouteHwPrunesGroupAddress The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.2.1.1
rcIpMrouteHwPrunesSubnet The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.24.2.1.2
rcIpMrouteHwPrunesInvlan The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.8.24.2.1.3
rcIpMrouteHwPrunesNeighbor The IpAddress from where the Prune message has been received.	SNMPv2-SMIIpAddress Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.24.2.1.4
rcIpMrouteHwPrunesTimer This is to show how much time is left for this particular entry containing multicast routing information during which the graft message can be sent.	SNMPv2-SMIInteger32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.24.2.1.5

rcIpMrouteHwSourcesTable

table

.1.3.6.1.4.1.2272.1.8.24.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMrouteHwSourcesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMrouteHwSourcesTable'

Copy

The (conceptual) table containing source entries of
multicast routing information for the Group Address.

rcIpMrouteHwSourcesEntry row .1.3.6.1.4.1.2272.1.8.24.3.1

An entry (conceptual row) containing source entries of
multicast routing information for a particular Group
Address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMrouteHwSourcesGroupAddress The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Enumerated Values: 1 up 2 down Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.3.1.1
rcIpMrouteHwSourcesSubnet The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.3.1.2
rcIpMrouteHwSourcesInvlan The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.8.24.3.1.3
rcIpMrouteHwSourcesAddress The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.24.3.1.4
rcIpMrouteHwSourcesIngressPort The Ingress vlan ports from where the traffic is coming, for which this entry contains multicast routing information.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.24.3.1.5

rcIpMrouteHwEgressVlansTable

table

.1.3.6.1.4.1.2272.1.8.24.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMrouteHwEgressVlansTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMrouteHwEgressVlansTable'

Copy

The (conceptual) table containing egress vlan entries of
multicast routing information for the Group Address.

rcIpMrouteHwEgressVlansEntry row .1.3.6.1.4.1.2272.1.8.24.4.1

An entry (conceptual row) containing egress vlan entries
of multicast routing information for a particular Group
Address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMrouteHwEgressVlansGroupAddress The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.4.1.1
rcIpMrouteHwEgressVlansSubnet The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.24.4.1.2
rcIpMrouteHwEgressVlansInvlan The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information.	RcVlanIdOrNone Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.24.4.1.3
rcIpMrouteHwEgressVlansId The Egress vlan Id from where the traffic is going out for which this entry contains multicast routing information	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.8.24.4.1.4
rcIpMrouteHwEgressVlansPorts he Egress vlan ports from where the traffic is going out for which this entry contains multicast routing information.	PortSet Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.24.4.1.5
rcIpMrouteHwEgressVlansIndex This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information.	Integer32	.1.3.6.1.4.1.2272.1.8.24.4.1.6

rcIpRsmltOperTable

table

.1.3.6.1.4.1.2272.1.8.26.2 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRsmltOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRsmltOperTable'

Copy

Route Smlt Table

rcIpRsmltOperEntry row .1.3.6.1.4.1.2272.1.8.26.2.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRsmltOperIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.26.2.1.1
rcIpRsmltOperAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.2.1.2
rcIpRsmltOperHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.26.2.1.3
rcIpRsmltOperHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32	.1.3.6.1.4.1.2272.1.8.26.2.1.4
rcIpRsmltOperHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.26.2.1.5
rcIpRsmltOperHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32	.1.3.6.1.4.1.2272.1.8.26.2.1.6
rcIpRsmltOperIpAddr IP Interface with RSMLT on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.26.2.1.7
rcIpRsmltOperOperStatus The operation status of Rsmlt, up or down.	Enumeration	.1.3.6.1.4.1.2272.1.8.26.2.1.8
rcIpRsmltOperSmltId The id range for SMLT is 1-32.	IdList	.1.3.6.1.4.1.2272.1.8.26.2.1.9
rcIpRsmltOperSltId The id range for SLT is 1-512.	IdList	.1.3.6.1.4.1.2272.1.8.26.2.1.10
rcIpRsmltOperVlanId Vlan id.	Integer32	.1.3.6.1.4.1.2272.1.8.26.2.1.11
rcIpRsmltOperMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.2.1.12
rcIpRsmltOperRowStatus Row Status.	SNMPv2-TCRowStatusr/w Enumerated Values: 0 none 1 asnum 2 ipaddr Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.26.2.1.13
rcIpRsmltOperVrfId Indicates the Virtual Router to which the RSMLT Oper instance belongs.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.26.2.1.14
rcIpRsmltOperVrfName Name of the Virtual Router to which the RSMLT Oper instance belongs.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.26.2.1.15

rcIpRsmltPeerTable

table

.1.3.6.1.4.1.2272.1.8.26.3 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRsmltPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRsmltPeerTable'

Copy

Route Smlt Table

rcIpRsmltPeerEntry row .1.3.6.1.4.1.2272.1.8.26.3.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRsmltPeerIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.26.3.1.1
rcIpRsmltPeerAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.3.1.2
rcIpRsmltPeerHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32 Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.8.26.3.1.3
rcIpRsmltPeerHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32 Enumerated Values: 0 none 1 asnum 2 ipaddr	.1.3.6.1.4.1.2272.1.8.26.3.1.4
rcIpRsmltPeerHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32	.1.3.6.1.4.1.2272.1.8.26.3.1.5
rcIpRsmltPeerHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.26.3.1.6
rcIpRsmltPeerIpAddr IP Interface with RSMLT on.	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.26.3.1.7
rcIpRsmltPeerOperStatus The operation status of Rsmlt, up or down.	Enumeration	.1.3.6.1.4.1.2272.1.8.26.3.1.8
rcIpRsmltPeerSmltId The id range for SMLT is 1-32.	IdList	.1.3.6.1.4.1.2272.1.8.26.3.1.9
rcIpRsmltPeerSltId The id range for SLT is 1-512.	IdList	.1.3.6.1.4.1.2272.1.8.26.3.1.10
rcIpRsmltPeerVlanId Vlan id.	Integer32 Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.8.26.3.1.11
rcIpRsmltPeerMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.3.1.12
rcIpRsmltPeerVrfId Indicates the Virtual Router to which the RSMLT Peer instance belongs.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.26.3.1.13
rcIpRsmltPeerVrfName Name of the Virtual Router to which the RSMLT Peer instance belongs.	OctetString	.1.3.6.1.4.1.2272.1.8.26.3.1.14

rcIpRsmltEdgePeerTable

table

.1.3.6.1.4.1.2272.1.8.26.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRsmltEdgePeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRsmltEdgePeerTable'

Copy

RSMLT Edge Support Peer Info table. This 
table consists of the RSMLT Peers for which 
the switch will act as a PeerForwarder.

rcIpRsmltEdgePeerEntry row .1.3.6.1.4.1.2272.1.8.26.4.1

RSMLT Edge Support Peer Info Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRsmltEdgeVlanId A value that uniquely identifies the Virtual LAN associated with this entry.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.8.26.4.1.1
rcIpRsmltEdgePeerIpAddress IP address of the Peer RSMLT Interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.26.4.1.2
rcIpRsmltEdgePeerMacAddress The MAC address of the Peer RSMLT interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.4.1.3
rcIpRsmltEdgePeerVrfId Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.26.4.1.4
rcIpRsmltEdgePeerVrfName Name of the Virtual Router to which the RSMLT Edge Peer instance belongs.	OctetString	.1.3.6.1.4.1.2272.1.8.26.4.1.5

rcIpv6RsmltOperTable

table

.1.3.6.1.4.1.2272.1.8.26.5 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RsmltOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RsmltOperTable'

Copy

Route Smlt Table

rcIpv6RsmltOperEntry row .1.3.6.1.4.1.2272.1.8.26.5.1

A local IPv6 RSMLT entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RsmltOperIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.26.5.1.1
rcIpv6RsmltOperIpv6Addr IPv6 Interface with RSMLT on.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.5.1.2
rcIpv6RsmltOperIpv6PrefixLength IPv6 Prefix Length.	Integer32 Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2272.1.8.26.5.1.3
rcIpv6RsmltOperAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.5.1.4
rcIpv6RsmltOperHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.26.5.1.5
rcIpv6RsmltOperHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32	.1.3.6.1.4.1.2272.1.8.26.5.1.6
rcIpv6RsmltOperHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.8.26.5.1.7
rcIpv6RsmltOperHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32	.1.3.6.1.4.1.2272.1.8.26.5.1.8
rcIpv6RsmltOperOperStatus The operation status of Rsmlt, up or down.	Enumeration Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.8.26.5.1.9
rcIpv6RsmltOperSmltId The id range for SMLT is 1-32.	IdList	.1.3.6.1.4.1.2272.1.8.26.5.1.10
rcIpv6RsmltOperSltId The id range for SLT is 1-512.	IdList	.1.3.6.1.4.1.2272.1.8.26.5.1.11
rcIpv6RsmltOperVlanId Vlan id.	Integer32	.1.3.6.1.4.1.2272.1.8.26.5.1.12
rcIpv6RsmltOperMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.5.1.13
rcIpv6RsmltOperVrfId Indicates the Virtual Router to which the RSMLT Oper instance belongs.	VrfIdentifier Constraints: range: 10-86400	.1.3.6.1.4.1.2272.1.8.26.5.1.14
rcIpv6RsmltOperVrfName Name of the Virtual Router to which the RSMLT Oper instance belongs.	OctetString	.1.3.6.1.4.1.2272.1.8.26.5.1.15

rcIpv6RsmltPeerTable

table

.1.3.6.1.4.1.2272.1.8.26.6 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RsmltPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RsmltPeerTable'

Copy

Route Smlt Peer Table

rcIpv6RsmltPeerEntry row .1.3.6.1.4.1.2272.1.8.26.6.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RsmltPeerIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.26.6.1.1
rcIpv6RsmltPeerIpv6Addr IP Interface with RSMLT on.	IPV6-TCIpv6Address Enumerated Values: 1 permit 2 deny Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.6.1.2
rcIpv6RsmltPeerIpv6PrefixLength IPv6 Prefix Length	Integer32 Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.8.26.6.1.3
rcIpv6RsmltPeerAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.6.1.4
rcIpv6RsmltPeerHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32	.1.3.6.1.4.1.2272.1.8.26.6.1.5
rcIpv6RsmltPeerHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32	.1.3.6.1.4.1.2272.1.8.26.6.1.6
rcIpv6RsmltPeerHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.2272.1.8.26.6.1.7
rcIpv6RsmltPeerHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.26.6.1.8
rcIpv6RsmltPeerOperStatus The operation status of Rsmlt, up or down.	Enumeration Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2272.1.8.26.6.1.9
rcIpv6RsmltPeerSmltId The id range for SMLT is 1-32.	IdList Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.8.26.6.1.10
rcIpv6RsmltPeerSltId The id range for SLT is 1-512.	IdList	.1.3.6.1.4.1.2272.1.8.26.6.1.11
rcIpv6RsmltPeerVlanId Vlan id.	Integer32	.1.3.6.1.4.1.2272.1.8.26.6.1.12
rcIpv6RsmltPeerMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.6.1.13
rcIpv6RsmltPeerVrfId Indicates the Virtual Router to which the RSMLT Peer instance belongs.	VrfIdentifier Constraints: range: 1-99	.1.3.6.1.4.1.2272.1.8.26.6.1.14
rcIpv6RsmltPeerVrfName Name of the Virtual Router to which the RSMLT Peer instance belongs.	OctetString Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2272.1.8.26.6.1.15

rcIpv6RsmltEdgePeerTable

table

.1.3.6.1.4.1.2272.1.8.26.7 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RsmltEdgePeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RsmltEdgePeerTable'

Copy

RSMLT Edge Support Peer Info table. This
table consists of the RSMLT Peers for which
the switch will act as a PeerForwarder.

rcIpv6RsmltEdgePeerEntry row .1.3.6.1.4.1.2272.1.8.26.7.1

RSMLT Edge Support Peer Info Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RsmltEdgePeerVlanId A value that uniquely identifies the Virtual LAN associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.8.26.7.1.1
rcIpv6RsmltEdgePeerIpv6Address IP address of the Peer RSMLT Interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.7.1.2
rcIpv6RsmltEdgePeerIpv6PrefixLength If set then this prefix can be used for address autoconfig, passed opaquely to Infinity	Integer32	.1.3.6.1.4.1.2272.1.8.26.7.1.3
rcIpv6RsmltEdgePeerMacAddress The MAC address of the Peer RSMLT interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.7.1.4
rcIpv6RsmltEdgePeerVrfId Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs.	VrfIdentifier Constraints: range: 100-199	.1.3.6.1.4.1.2272.1.8.26.7.1.5
rcIpv6RsmltEdgePeerVrfName Name of the Virtual Router to which the RSMLT Edge Peer instance belongs.	OctetString Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.2272.1.8.26.7.1.6
rcIpv6RsmltEdgePeerIsRaPrefix True if this is a Router Advertisement prefix, False if this is a global address.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.7
rcIpv6RsmltEdgePeerConfType Type of configured address, passed opaquely to Infinity	Integer32	.1.3.6.1.4.1.2272.1.8.26.7.1.8
rcIpv6RsmltEdgePeerNoAdvertise True if advertisement of this prefix is disabled, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.9
rcIpv6RsmltEdgePeerOspf6Advertise True if OSPFv3 advertisement of this prefix is enabled, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.10
rcIpv6RsmltEdgePeerPrefCandidate True if address is considered for preferred selection, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.11
rcIpv6RsmltEdgePeerPfxValidLife Valid lifetime in seconds, passed opaquely to Infinity	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.26.7.1.12
rcIpv6RsmltEdgePeerPfxPrefLife Preferred lifetime in seconds, passed opaquely to Infinity	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.26.7.1.13
rcIpv6RsmltEdgePeerPfxOnLinkFlag If set then this prefix can be used for onlink determination, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.14
rcIpv6RsmltEdgePeerPfxAutoFlag If set then this prefix can be used for address autoconfig, passed opaquely to Infinity	SNMPv2-TCTruthValue Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.15

rcIpVpnRouteDistinguisherTable

table

.1.3.6.1.4.1.2272.1.8.27.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpVpnRouteDistinguisherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpVpnRouteDistinguisherTable'

Copy

The Route Distinguisher Table is a table of entries.

rcIpVpnRouteDistinguisherEntry row .1.3.6.1.4.1.2272.1.8.27.2.1

The table contains route distinguisher entry for ipvpn. A route distinguisher entry can be of two types: Type 0 and Type 1. Each type is comprised as follows: Type 0 is made …

Indexes

No indexes recorded

Column	Syntax	OID
rcIpVpnVrfId The VrfId is the unique identifier of the rcIpVpnRouteDistinguisherTable. It is unique because there is only one Route-Distinguisher per Vrf i.e. there is a one-to-one mapping between the route-distinguisher and the Vrf.	VrfIdentifier Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.27.2.1.1
rcIpVpnRouteDistinguisherType The route distinguisher can be of the type Ipaddress or AS number (Autonomous System) number.	Enumeration Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.27.2.1.2
rcIpVpnRouteDistinguisherAddress The IpAddress is required along with the Assigned number to create a route-distinguisher entry.	SNMPv2-SMIIpAddressr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.8.27.2.1.3
rcIpVpnRouteDistinguisherAsNumber The AS (Autonomous System) number is required along with the Assigned number to create a route-distinguisher entry.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.27.2.1.4
rcIpVpnRouteDistinguisherAssignedNum The assigned number is used in combination with the IpAddress or the AS number to create an entry for the route-distinguisher.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.27.2.1.5
rcIpVpnRouteDistinguisherRowStatus Row Status for the Route Distinguisher Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.27.2.1.6

rcIpVpnRouteTargetTable

table

.1.3.6.1.4.1.2272.1.8.27.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpVpnRouteTargetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpVpnRouteTargetTable'

Copy

This table specifies per-VRF route target association.

rcIpVpnRouteTargetEntry row .1.3.6.1.4.1.2272.1.8.27.4.1

An entry in this table is created for each route target
configured for a VRF supporting a MPLS/BGP VPN instance.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpVpnRouteTargetIndex The Route Target Index is a unique value for the rcIpVpnRouteTargetTable. It is an incremental integer value.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.8.27.4.1.1
rcIpVpnRouteTargetType The route target entry is identified on the basis of ipaddress for Autonomous System number.	Enumeration	.1.3.6.1.4.1.2272.1.8.27.4.1.2
rcIpVpnRouteTargetIpAddress The IpAddress is required along with the Assigned number to create a route-target entry.	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 permit 2 deny Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.27.4.1.3
rcIpVpnRouteTargetAsNumber The AS (Autonomous System) number is required along with the Assigned number to create a route-target entry.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.27.4.1.4
rcIpVpnRouteTargetAssignedNum The assigned number is used in combination with the IpAddress or the AS number to create an entry for the route-target table.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.27.4.1.5
rcIpVpnRouteTargetRowStatus Table Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.27.4.1.6

rcIpDhcpOp82StatsTable

table

.1.3.6.1.4.1.2272.1.8.29 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpDhcpOp82StatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpDhcpOp82StatsTable'

Copy

DHCP statistics table for Relay Agent Information Option

rcIpDhcpOp82StatsEntry row .1.3.6.1.4.1.2272.1.8.29.1

Used to see current statistics on interfaces that have
DHCP Option 82 (Relay Agent Information) enabled.
This table is read-only.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpDhcpOp82StatsIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	Integer32 Constraints: range: 0-259	.1.3.6.1.4.1.2272.1.8.29.1.1
rcIpDhcpOp82StatsFoundOp82 Represents the number of packets received on the interface that already had Dhcp Option 82 inserted in them	SNMPv2-SMICounter32 Constraints: range: 0-259	.1.3.6.1.4.1.2272.1.8.29.1.2
rcIpDhcpOp82StatsDropped Represents the number of packets dropped because of reasons related to Dhcp Option 82. These reasons could be that the packet was received from an untrusted source or spoofing was detected.	SNMPv2-SMICounter32 Constraints: range: 0-259	.1.3.6.1.4.1.2272.1.8.29.1.3
rcIpDhcpOp82StatsCircuitId Represents the value of CircuitId inserted in the packets. This is the Port number of the Dhcp Relay.	SNMPv2-SMIInteger32 Enumerated Values: 0 any 1 local 2 internal 3 external 4 externaltype1 5 externaltype2 6 level1 7 level2 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.29.1.4
rcIpDhcpOp82StatsAddedCircuitId Represents the number of packets which had CircuitId inserted on this interface	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.29.1.5
rcIpDhcpOp82StatsRemovedCircuitId Represents the number of packets which had CircuitId removed on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.6
rcIpDhcpOp82StatsRemoteId Represents the value of RemoteId inserted in the packets. This is the Mac address of the Dhcp Relay.	SNMPv2-TCMacAddress Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.29.1.7
rcIpDhcpOp82StatsAddedRemoteId Represents the number of packets which had RemoteId inserted on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.8
rcIpDhcpOp82StatsRemovedRemoteId Represents the number of packets which had RemoteId removed on this interface	SNMPv2-SMICounter32 Enumerated Values: 1 tag 2 prepend Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.9
rcIpDhcpOp82StatsAgentAddr The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.29.1.10

rcIpNetToMediaTable

table

.1.3.6.1.4.1.2272.1.8.30 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpNetToMediaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpNetToMediaTable'

Copy

The IP Address Translation table used for mapping
from IP addresses to physical addresses.

rcIpNetToMediaEntry row .1.3.6.1.4.1.2272.1.8.30.1

Each entry contains one IpAddress to `physical'
address equivalence.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpNetToMediaNetAddress The IpAddress corresponding to the media- dependent `physical' address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.30.1.1
rcIpNetToMediaIfIndex The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.30.1.2
rcIpNetToMediaPhysAddress The media-dependent `physical' address.	SNMPv2-TCPhysAddressr/w Enumerated Values: 1 type1 2 type2 3 internal 4 external Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2272.1.8.30.1.3
rcIpNetToMediaType The is ARP entry type field.	Enumeration	.1.3.6.1.4.1.2272.1.8.30.1.4
rcIpNetToMediaTimeToLive This is TTL (time to live) field.	secondsSNMPv2-SMIInteger32 Enumerated Values: 0 unchanged 1 igp 2 egp 3 incomplete Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.30.1.5
rcIpNetToMediaRowStatus Table row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.30.1.6
rcIpNetToMediaDestIfIndex Destination IfIndex.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.30.1.7
rcIpNetToMediaDestVlanId Destination VlanId.	Integer32	.1.3.6.1.4.1.2272.1.8.30.1.8
rcIpNetToMediaBMac If the rcIpNetToMediaEntry is learned from a SPBM network, instead of using port to track where the rcIpNetToMediaNetAddress come from, the backbone MAC address is used to track that.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.30.1.9
rcIpNetToMediaDestCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case.	Integer32	.1.3.6.1.4.1.2272.1.8.30.1.10

rcIpMvpnTable

table

.1.3.6.1.4.1.2272.1.8.31 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMvpnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMvpnTable'

Copy

Table required to configure mvpn

rcIpMvpnTableEntry row .1.3.6.1.4.1.2272.1.8.31.1

Entries in this table are per rcVrfId.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMvpnVrfId The VrfId serves as the Index for rcVrfIpMvpnTableEntry	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.31.1.1
rcIpMvpnEnable The status of mvpn on a vrf.	EnableValuer/w Constraints: range: 0-1024 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.31.1.2
rcIpMvpnFwdCacheTimeout Mvpn Fwd Cache Timeout in seconds	Integer32r/w	.1.3.6.1.4.1.2272.1.8.31.1.3

rcIpAsPathAccessListTable

table

.1.3.6.1.4.1.2272.1.8.100.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpAsPathAccessListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpAsPathAccessListTable'

Copy

IP As Path Access List table

rcIpAsPathAccessListEntry row .1.3.6.1.4.1.2272.1.8.100.2.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpAsPathAccessListId Path Access List entry Id.	Integer32	.1.3.6.1.4.1.2272.1.8.100.2.1.1
rcIpAsPathAccessListMemberId frq. at which hello sent.	Integer32 Constraints: range: 0-259	.1.3.6.1.4.1.2272.1.8.100.2.1.2
rcIpAsPathAccessListMode Path Access List Mode, permit or deny.	Enumerationr/w Constraints: range: 1-1027	.1.3.6.1.4.1.2272.1.8.100.2.1.3
rcIpAsPathAccessListAsRegularExpression IP Path Access List Regular Expression	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.2.1.4
rcIpAsPathAccessListRowStatus Table row status.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 any 2 internal 3 external Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.2.1.5

rcIpCommunityAccessListTable

table

.1.3.6.1.4.1.2272.1.8.100.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpCommunityAccessListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpCommunityAccessListTable'

Copy

IP CommunityAccess List table

rcIpCommunityAccessListEntry row .1.3.6.1.4.1.2272.1.8.100.4.1

An entry of Ip CommunityAccess List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpCommunityAccessListId IP CommunityAccess entry List Id	Integer32	.1.3.6.1.4.1.2272.1.8.100.4.1.1
rcIpCommunityAccessListMemberId frq. at which hello sent.	Integer32	.1.3.6.1.4.1.2272.1.8.100.4.1.2
rcIpCommunityAccessListMode IP Community Access List Mode, permit or deny.	Enumerationr/w Enumerated Values: 1 ospf 2 bgp 3 isis 4 ospfv3 5 vrf-ext	.1.3.6.1.4.1.2272.1.8.100.4.1.3
rcIpCommunityAccessListCommunity IP Community Access List Community string.	OctetStringr/w Enumerated Values: 1 direct 2 static 3 rip 4 ospf 5 bgp 6 isis	.1.3.6.1.4.1.2272.1.8.100.4.1.4
rcIpCommunityAccessListRowStatus IP Community Access Table Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.4.1.5

rcIpAccessListTable

table

.1.3.6.1.4.1.2272.1.8.100.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpAccessListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpAccessListTable'

Copy

IP Access List table

rcIpAccessListEntry row .1.3.6.1.4.1.2272.1.8.100.6.1

An entry of Ip Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpAccessListId	Integer32 Enumerated Values: 1 internal 2 external1 3 external2	.1.3.6.1.4.1.2272.1.8.100.6.1.1
rcIpAccessListMode	Enumeration	.1.3.6.1.4.1.2272.1.8.100.6.1.2
rcIpAccessListNetwork	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 allow 2 supress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.6.1.3
rcIpAccessListNetworkMask	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.6.1.4
rcIpAccessListName	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.6.1.5
rcIpAccessListRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.6.1.6

rcIpExtendedAccessListTable

table

.1.3.6.1.4.1.2272.1.8.100.8 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpExtendedAccessListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpExtendedAccessListTable'

Copy

IP Extended Access List table

rcIpExtendedAccessListEntry row .1.3.6.1.4.1.2272.1.8.100.8.1

An entry of Ip Extended Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpExtendedAccessListId	Integer32 Enumerated Values: 2 level2	.1.3.6.1.4.1.2272.1.8.100.8.1.1
rcIpExtendedAccessListMode	Enumeration	.1.3.6.1.4.1.2272.1.8.100.8.1.2
rcIpExtendedAccessListNetwork	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.8.1.3
rcIpExtendedAccessListNetworkWildCard	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.8.1.4
rcIpExtendedAccessListNetworkMask	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.8.1.5
rcIpExtendedAccessListNetworkMaskWildCard	SNMPv2-SMIIpAddress Enumerated Values: 1 type1 2 type2 3 any Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.8.1.6
rcIpExtendedAccessListName	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.8.1.7
rcIpExtendedAccessListRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.8.1.8

rcIpPrefixListTable

table

.1.3.6.1.4.1.2272.1.8.100.10 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPrefixListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPrefixListTable'

Copy

IP Prefix List table

rcIpPrefixListEntry row .1.3.6.1.4.1.2272.1.8.100.10.1

An entry of Ip Prefix List Table.

Indexes

rcIpRoutePrefProtocol

Column	Syntax	OID
rcIpPrefixListId ListId	Integer32 Enumerated Values: 1 local 2 static 3 mpls 4 ospfIntra 5 ospfInter 6 isisLevel1 7 isisLevel2 8 ebgp 9 rip 10 ospfExternal1 11 ospfExternal2 12 ibgp 13 staticv6 14 ospfv3Intra 15 ospfv3Inter 16 ospfv3External1 17 ospfv3External2 18 spbmLevel1 19 spbmv6Level1	.1.3.6.1.4.1.2272.1.8.100.10.1.1
rcIpPrefixListPrefix Is a member of a specific prefix list. Adding the prefix to the given prefix list	SNMPv2-SMIIpAddress Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.100.10.1.2
rcIpPrefixListPrefixMaskLen prefix mask length	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.100.10.1.3
rcIpPrefixListMaskLenFrom used with mask len	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.10.1.4
rcIpPrefixListMaskLenUpto used with mask len	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.10.1.5
rcIpPrefixListName list name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.10.1.6
rcIpPrefixListRowStatus row status	SNMPv2-TCRowStatusr/w Enumerated Values: 1 ospf 2 bgp 3 isis 4 vrf-ext 5 extranet 6 rip 10 ospfv3 11 bgpv6 12 isisv6 13 ripng 14 dvr Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.10.1.7

rcIpRoutePolicyTable

table

.1.3.6.1.4.1.2272.1.8.100.13 · 1 row entry · 46 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRoutePolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRoutePolicyTable'

Copy

IP Route Map table

rcIpRoutePolicyEntry row .1.3.6.1.4.1.2272.1.8.100.13.1

An entry of Ip Route Map Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRoutePolicyId Index used to identify a group of policies in the route policy tableRoute map id	Integer32	.1.3.6.1.4.1.2272.1.8.100.13.1.1
rcIpRoutePolicySequenceNumber second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.13.1.2
rcIpRoutePolicyName Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence number, whereas with in a gro…	OctetStringr/w Enumerated Values: 1 type1 2 type2 3 live	.1.3.6.1.4.1.2272.1.8.100.13.1.3
rcIpRoutePolicyEnable Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 internal 2 external1 3 external2 Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.100.13.1.4
rcIpRoutePolicyMode specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, deny indicates ignore the route. Continue means continue chec…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.5
rcIpRoutePolicyMatchProtocol Match protocol. Used for RIP and DVMRP announce policy only. Value is one of multiple (logical 'OR) of the following values: direct(1), static(2), rip(4), ospf(8), ebgp(16), dvmrp(32), ibgp(64), …	Integer32r/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.2272.1.8.100.13.1.6
rcIpRoutePolicyMatchAsPath Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.7
rcIpRoutePolicyMatchCommunity Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.8
rcIpRoutePolicyMatchCommunityExact If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched).	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.100.13.1.9
rcIpRoutePolicyMatchNetwork can specify one or more prefix list name or id(s)	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.10
rcIpRoutePolicyMatchIpRouteSource In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperated by comma.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.11
rcIpRoutePolicyMatchNextHop In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperated by comma.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.12
rcIpRoutePolicyMatchInterface Match received interface. Only for rip routes. Ignored in all other cases.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.13
rcIpRoutePolicyMatchRouteType For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs to local autonomous system). External (type1|type2) refers to…	Enumerationr/w Constraints: range: 1-1024	.1.3.6.1.4.1.2272.1.8.100.13.1.14
rcIpRoutePolicyMatchMetric Match mec field in the incoming advertisement.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.13.1.15
rcIpRoutePolicyMatchTag specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values..	SNMPv2-TCDisplayStringr/w Enumerated Values: 0 none 1 asnum 2 ipaddr Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.16
rcIpRoutePolicySetRoutePreference if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values..	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.13.1.17
rcIpRoutePolicySetAsPath The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string..	SNMPv2-TCDisplayStringr/w Constraints: range: 0-65535 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.18
rcIpRoutePolicySetAsPathMode It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path.	Enumerationr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.19
rcIpRoutePolicySetAutomaticTag	EnableValuer/w Enumerated Values: 0 none 1 asnum 2 ipaddr	.1.3.6.1.4.1.2272.1.8.100.13.1.20
rcIpRoutePolicySetCommunityNumber this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.21
rcIpRoutePolicySetCommunityMode this value can be either append or none unchanged - keep the community attribute in the route path as it is. none - remove the community in the route path additive - adds the community-number specified …	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.13.1.22
rcIpRoutePolicySetMetricTypeInternal Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value.	SNMPv2-SMIInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.23
rcIpRoutePolicySetMetric Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal value defined for protocol	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.13.1.24
rcIpRoutePolicySetMetricType Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.25
rcIpRoutePolicySetNextHop IpAddress of the next hop router. Ignored for DVMRP routes.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.13.1.26
rcIpRoutePolicySetOrigin igp/egp/incomplete Applicable to BGP protocol only. If not set uses the route origin from the Ip routing table (protocol).	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.27
rcIpRoutePolicySetLocalPref this value will be used during route decision process in the BGP protocol. Applicable to BGP only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.28
rcIpRoutePolicySetOriginEgpAs indicates the Remote autonomous sys number. Applicable to BGP only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.29
rcIpRoutePolicySetTag Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol. Value 0 indicates not set	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.30
rcIpRoutePolicySetWeight Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEntry or FilterListWeight or NeighborWeight. Used for BGP only…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.31
rcIpRoutePolicySetInjectNetList specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement. Ignored for DVMRP.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.32
rcIpRoutePolicyRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.13.1.33
rcIpRoutePolicySetMask Set Mask Ip Address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.13.1.34
rcIpRoutePolicyNssaPbit Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs associated with that route policy will have P bit cleared, w…	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.100.13.1.35
rcIpRoutePolicyMatchVrf An array used to identify which source VRFs have leaked routes to the local VRF	OctetStringr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.36
rcIpRoutePolicyMatchExtCommunity Filter incoming/outgoing updates based on communities	SNMPv2-TCDisplayStringr/w Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.37
rcIpRoutePolicySetExtCommunity Set Extended-community string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.13.1.38
rcIpRoutePolicySetExtCommunityMode This value can be either additive, unchanged or overwrite.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.39
rcIpRoutePolicyMatchLocalPref Match Local Prefix value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.40
rcIpRoutePolicyMatchIpRouteDest to match route destination, one can specify one or more prefix list name(s) or id(s) separated by comma.	OctetStringr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.100.13.1.41
rcIpRoutePolicyMatchExtendedPref To associate extended ACL(access control list) with the route policy. User can associate one or multiple extended ACLs.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.8.100.13.1.42
rcIpRoutePolicyIpv6SetNextHop Address of the ipv6 next hop router. Ignored for DVMRP routes.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.100.13.1.43
rcIpRoutePolicyMatchMetricTypeIsis Match metric type field in the incoming ISIS routes in accept policy.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.13.1.44
rcIpRoutePolicySetMetricTypeIsis Set Metric type ISIS.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.100.13.1.45
rcIpRoutePolicySetMetricTypeBgp Set Metric type BGP.	Enumerationr/w Enumerated Values: 1 local 2 static 3 mpls 4 ospfIntra 5 ospfInter 6 isisLevel1 7 isisLevel2 8 ebgp 9 rip 10 ospfExternal1 11 ospfExternal2 12 ibgp 13 spbmLevel1	.1.3.6.1.4.1.2272.1.8.100.13.1.46

rcIpRedistributeTable

table

.1.3.6.1.4.1.2272.1.8.100.16 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRedistributeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRedistributeTable'

Copy

IP Redistribute table

rcIpRedistributeEntry row .1.3.6.1.4.1.2272.1.8.100.16.1

An entry of Ip Redistribute Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRedistributeProtocol Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info.	Enumeration	.1.3.6.1.4.1.2272.1.8.100.16.1.1
rcIpRedistributeRouteSource equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this source.	Enumeration	.1.3.6.1.4.1.2272.1.8.100.16.1.2
rcIpRedistributeEnable Enable/Disable. By default this is enabled.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.100.16.1.3
rcIpRedistributeMetric value of the metric to be announced in the advertisment. The Range specified is the range for ISIS for other protocols range is (0 .. 65535)	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.16.1.4
rcIpRedistributeMetricType specifies the type of the metric type, useful for OSPF and BGP only. In case of ISIS type1 is treated as internal and type2 is treated as external	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.16.1.5
rcIpRedistributeMatchRouteType used to filter a route based on the route type. applicable to BGP.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.16.1.6
rcIpRedistributeSetTag Tag value to be set in the advertisment.	SNMPv2-SMIInteger32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.16.1.7
rcIpRedistributeSubnets applicable to OSPF only. Indicates that all the subnets need to be advertised individually.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.16.1.8
rcIpRedistributeRoutePolicy specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.Route map name	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.16.1.9
rcIpRedistributeASNumber Autonomous system number. Used only for the BGP protocol.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.16.1.10
rcIpRedistributeWeight used only for the BGP protocol.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.16.1.11
rcIpRedistributeDefaultOriginate indicates the given protocol will originate/advertise a default route.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.16.1.12
rcIpRedistributeRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.16.1.13
rcIpRedistributeLevel This is for ISIS only this sets the redistribute level. Set this to level2 to distribute the routes in L2 LSPs if the router is at level1 then setting redistribute at level2 does not have any significance.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.16.1.14

rcIpOspfInFilterTable

table

.1.3.6.1.4.1.2272.1.8.100.19 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpOspfInFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpOspfInFilterTable'

Copy

IP Ospf In Filter table

rcIpOspfInFilterEntry row .1.3.6.1.4.1.2272.1.8.100.19.1

An entry of Ip Ospf In Filter Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpOspfInFilterAdvertisingRtr	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.19.1.1
rcIpOspfInFilterEnable IfIndex	EnableValuer/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2272.1.8.100.19.1.2
rcIpOspfInFilterMetricType	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.19.1.3
rcIpOspfInFilterPolicyName	SNMPv2-TCDisplayStringr/w Constraints: range: 0-65535 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.19.1.4
rcIpOspfInFilterRowStatus	SNMPv2-TCRowStatusr/w Constraints: range: 0-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.19.1.5

rcIpRoutePrefTable

table

.1.3.6.1.4.1.2272.1.8.100.21 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRoutePrefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRoutePrefTable'

Copy

IP Route Pref table

rcIpRoutePrefEntry row .1.3.6.1.4.1.2272.1.8.100.21.1

An entry of Ip Route Pref Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRoutePrefProtocol Protocol	Enumeration Constraints: range: 5-120	.1.3.6.1.4.1.2272.1.8.100.21.1.1
rcIpRoutePrefDefault Shows the default preference value for the given protocol.	Integer32 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.8.100.21.1.2
rcIpRoutePrefConfigured This value is configurable by the user	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.21.1.3

rcIpRedistributeInterVrfTable

table

.1.3.6.1.4.1.2272.1.8.100.22 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRedistributeInterVrfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRedistributeInterVrfTable'

Copy

IP Redistribute table for Inter-VRFs

rcIpRedistributeInterVrfEntry row .1.3.6.1.4.1.2272.1.8.100.22.1

An entry of Ip Redistribute Table.(new)

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRedistributeInterVrfDstVrfId dst VRF id used in the redistribution	VrfIdentifier Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.22.1.1
rcIpRedistributeInterVrfProtocol Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info.	Enumeration Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.22.1.2
rcIpRedistributeInterVrfSrcVrfId src VRF id used in the redistribution	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.100.22.1.3
rcIpRedistributeInterVrfRouteSource equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this source.	Enumeration	.1.3.6.1.4.1.2272.1.8.100.22.1.4
rcIpRedistributeInterVrfEnable Enable/Disable. By default this is enabled.	EnableValuer/w Enumerated Values: 1 in 2 out 3 none	.1.3.6.1.4.1.2272.1.8.100.22.1.5
rcIpRedistributeInterVrfMetric value of the metric to be announced in the advertisment	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.22.1.6
rcIpRedistributeInterVrfMetricType specifies the type of the metric type, useful for OSPF and BGP only.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.22.1.7
rcIpRedistributeInterVrfMatchRouteType used to filter a route based on the route type. applicable to BGP.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.22.1.8
rcIpRedistributeInterVrfSetTag Tag value to be set in the advertisment.	SNMPv2-SMIInteger32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2272.1.8.100.22.1.9
rcIpRedistributeInterVrfSubnets applicable to OSPF only. Indicates that all the subnets need to be advertised individually.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.100.22.1.10
rcIpRedistributeInterVrfRoutePolicy specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.Route map name	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.100.22.1.11
rcIpRedistributeInterVrfASNumber Autonomous system number. Used only for the BGP protocol.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 lsp 2 lspgroup Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.22.1.12
rcIpRedistributeInterVrfWeight used only for the BGP protocol.	SNMPv2-SMIInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.100.22.1.13
rcIpRedistributeInterVrfDefaultOriginate indicates the given protocol will originate/advertise a default route.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.100.22.1.14
rcIpRedistributeInterVrfRowStatus row status	SNMPv2-TCRowStatusr/w Constraints: range: 2-2 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.22.1.15

rcIpExtCommunityAccessListTable

table

.1.3.6.1.4.1.2272.1.8.100.24 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpExtCommunityAccessListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpExtCommunityAccessListTable'

Copy

IP Extended Community Access List table.

rcIpExtCommunityAccessListEntry row .1.3.6.1.4.1.2272.1.8.100.24.1

An entry of Ip Extended Community Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpExtCommunityAccessListId IP extended Community Access List Id	Integer32	.1.3.6.1.4.1.2272.1.8.100.24.1.1
rcIpExtCommunityAccessListMemberId Member Id for the extended-community list to be added	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.24.1.2
rcIpExtCommunityAccessListRTType The route target Type for IP Extended Community rule in the list	Enumeration Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.100.24.1.3
rcIpExtCommunityAccessListRTAddress Extended community Ip address for the route-target type entry.	SNMPv2-SMIIpAddressr/w Enumerated Values: 0 none 1 asnum 2 ipaddr Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.24.1.4
rcIpExtCommunityAccessListRTAsNumber Extended community Asnumber for the route-target type entry.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.24.1.5
rcIpExtCommunityAccessListRTAssignedNum Extended community assigned number for the route-target type entry.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.100.24.1.6
rcIpExtCommunityAccessListSooType The site of origin Type for IP Extended Community Access List	Enumeration Constraints: range: 0-10	.1.3.6.1.4.1.2272.1.8.100.24.1.7
rcIpExtCommunityAccessListSooAddress Extended community Ip address for the site-of-origin type of entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.24.1.8
rcIpExtCommunityAccessListSooAsNumber Extended community AsNumber for the site-of-origin type of entry.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.24.1.9
rcIpExtCommunityAccessListSooAssignedNum Extended community assigned number for the site-of-origin type of entry.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.100.24.1.10
rcIpExtCommunityAccessListVrfId VrfId for the extended-community Access list.	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.100.24.1.11
rcIpExtCommunityAccessListRowStatus IP Ext Community Table Row Status.	SNMPv2-TCRowStatusr/w Constraints: range: 1-1024 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.24.1.12

rcIpExtACLTable

table

.1.3.6.1.4.1.2272.1.8.100.25 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpExtACLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpExtACLTable'

Copy

This table contains list of extended ACL (access control list) configuration.
The extended ACL is used to filter SA (Source-Active) messages by matching
both the source and destination address fields of a given packet.

rcIpExtACLEntry row .1.3.6.1.4.1.2272.1.8.100.25.1

An entry (conceptual row) representing a prefix of an ACL list.
The ACL list is identified by the ACL name. User can add one
or multiple prefixes to an ACL list. Empty ACL list is not allowed.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpExtACLPrefixSourceAddr This is the source address of the prefix.	SNMPv2-SMIIpAddress Enumerated Values: 1 enable 2 disable Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.25.1.1
rcIpExtACLPrefixSourceMask This is the source mask of the prefix.	SNMPv2-SMIIpAddress Enumerated Values: 1 enable 2 disable Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.100.25.1.2
rcIpExtACLPrefixDestinationAddr This is the destination address of the prefix.	SNMPv2-SMIIpAddress Constraints: range: 5-120	.1.3.6.1.4.1.2272.1.8.100.25.1.3
rcIpExtACLPrefixDestinationMask This is a destination mask of the prefix.	SNMPv2-SMIIpAddress Constraints: range: 0-21845	.1.3.6.1.4.1.2272.1.8.100.25.1.4
rcIpExtACLPrefixName This is the extended ACL list to which the prefixes belongs. An extended ACL list must have one prefix at least.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.100.25.1.5
rcIpExtACLPrefixRowStatus Used to create/delete prefixes from ACL list.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.100.25.1.6

rcIpPrefixListNameTable

table

.1.3.6.1.4.1.2272.1.8.100.27 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpPrefixListNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpPrefixListNameTable'

Copy

Prefix List Name table

rcIpPrefixListNameEntry row .1.3.6.1.4.1.2272.1.8.100.27.1

An entry of Prefix List Name Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpPrefixListNameId list id	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.27.1.1
rcIpPrefixListNameName list name	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.100.27.1.2

rcIpRoutePolicyNameTable

table

.1.3.6.1.4.1.2272.1.8.100.28 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpRoutePolicyNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpRoutePolicyNameTable'

Copy

Route Policy Name table for all VRFs

rcIpRoutePolicyNameEntry row .1.3.6.1.4.1.2272.1.8.100.28.1

An entry of Route Policy Name Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpRoutePolicyNameVrfId route policy vrfId	VrfIdentifier Enumerated Values: 1 in 2 out Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.100.28.1.1
rcIpRoutePolicyNameId route policy id	Integer32 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.8.100.28.1.2
rcIpRoutePolicyNameName route policy name	OctetString	.1.3.6.1.4.1.2272.1.8.100.28.1.3

rcIpNewRoutePrefTable

table

.1.3.6.1.4.1.2272.1.8.100.30 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpNewRoutePrefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpNewRoutePrefTable'

Copy

New IPv4 Route Pref table. This table and
rcIpv6RoutePrefTable are designed
to obsolete the rcIpRoutePrefTable

rcIpNewRoutePrefEntry row .1.3.6.1.4.1.2272.1.8.100.30.1

An entry of New Ipv4 Route Pref Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpNewRoutePrefDefaultValue Shows the default preference value for the given protocol.	Integer32	.1.3.6.1.4.1.2272.1.8.100.30.1.1
rcIpNewRoutePrefProtocol Protocol name	Enumeration	.1.3.6.1.4.1.2272.1.8.100.30.1.2
rcIpNewRoutePrefConfiguredValue This value is configurable by the user	Integer32r/w	.1.3.6.1.4.1.2272.1.8.100.30.1.3

rcIpBgpAggregateTable

table deprecated

.1.3.6.1.4.1.2272.1.8.101.3 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpAggregateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpAggregateTable'

Copy

To specify the list of aggregate prefixes to be
created  by the BGP routing process and the options
to be used while aggregating.

rcIpBgpAggregateEntry row .1.3.6.1.4.1.2272.1.8.101.3.1

An entry of rcIpBgp Aggregate Address In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpAggregateAddress Prefix to create an aggregate address in BGP routing table.	SNMPv2-SMIIpAddress Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.101.3.1.1
rcIpBgpAggregateMask Mask for the aggregrate	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.101.3.1.2
rcIpBgpAggregateAsSetGenerate Enable Generates autonomous system set path information.	EnableValuer/w Enumerated Values: 0 none 1 asnum 2 ipaddr	.1.3.6.1.4.1.2272.1.8.101.3.1.3
rcIpBgpAggregateSummaryOnly Filters all more specific routes from updates.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.3.1.4
rcIpBgpAggregateSuppressPolicy Name of route policy used to select the routes to be suppressed.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.3.1.5
rcIpBgpAggregateAdvertisePolicy Name of route policy used to select the routes to create AS-SET origin communities.	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.2272.1.8.101.3.1.6
rcIpBgpAggregateAttributePolicy Name of route policy used to set the attribute of the aggregate route.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.3.1.7
rcIpBgpAggregateRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.3.1.8

rcIpBgpNetworkTable

table deprecated

.1.3.6.1.4.1.2272.1.8.101.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpNetworkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpNetworkTable'

Copy

The networks in this table are either static/directly
connected or learned routes. Bgp advertises these
network provided they are reachable and are in the IP
routing table

rcIpBgpNetworkEntry row .1.3.6.1.4.1.2272.1.8.101.7.1

An entry In NetworkTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpNetworkAddr Network prefix that BGP will advertise.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.7.1.1
rcIpBgpNetworkMask Network mask	SNMPv2-SMIIpAddress Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.7.1.2
rcIpBgpNetworkRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.7.1.3
rcIpBgpNetworkMetric Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp peers.	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2272.1.8.101.7.1.4

rcIpBgpPeerTable

table deprecated

.1.3.6.1.4.1.2272.1.8.101.9 · 1 row entry · 36 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpPeerTable'

Copy

IP BGP Peer table

rcIpBgpPeerEntry row .1.3.6.1.4.1.2272.1.8.101.9.1

An entry of Ip rcIpBgp Peer Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpPeerEnable Enable/Disable: controls whether the peer connection is enabled or disabled	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.1
rcIpBgpPeerIpAddress The Ip address of this peer	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.9.1.2
rcIpBgpPeerRemoteAs Remote Autonomous system number of this peer	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.101.9.1.3
rcIpBgpPeerGroupName Peer group name to which this peer belongs (optional)	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.4
rcIpBgpPeerDefaultOriginate To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.5
rcIpBgpPeerEbgpMultiHop To accept and attempt BGP connections to external peers residing on networks that are not directly connected	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.6
rcIpBgpPeerAdvertisementInterval To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 5 to 120.	Integer32r/w Enumerated Values: 1 announced 2 suppressed	.1.3.6.1.4.1.2272.1.8.101.9.1.7
rcIpBgpPeerPassword To enable MD5 authentication on a TCP connection between two BGP peers Case-sensitive password of up to 80 character	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.8
rcIpBgpPeerWeight To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.9
rcIpBgpPeerMaxPrefix Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.10
rcIpBgpPeerNextHopSelf Set NextHop Attribute to local router address before sending updates to remote peer	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.9.1.11
rcIpBgpPeerRoutePolicyIn Route Policy Name that will be applied to all networks learned from this peer	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.12
rcIpBgpPeerRoutePolicyOut Route policy name that will be applied to all outgoing updates	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.101.9.1.13
rcIpBgpPeerRouteReflectorClient Indicates whether this peer is a route reflector client.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.9.1.14
rcIpBgpPeerSoftReconfigurationIn If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconfig-in causes all bgp routes to be stored…	EnableValuer/w Constraints: range: 255-255 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.15
rcIpBgpPeerSoftReconfiguration If rcIpBgpPeerSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcIpBgpPeerSoftReconfiguration to in(1). Se…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.16
rcIpBgpPeerRemovePrivateAs Enable and disable private AS number from being stripped when sending an update	EnableValuer/w Constraints: range: 255-255 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.17
rcIpBgpPeerRowStatus Used to create/delete entries in the Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.9.1.18
rcIpBgpPeerMD5Authentication Enable and Disable MD5 authentication	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.19
rcIpBgpPeerDebugMask value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.20
rcIpBgpPeerSendCommunity	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.21
rcIpBgpPeerUpdateSourceInterface The IP address to be used for Circuitless IP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.9.1.22
rcIpBgpPeerBgpMplsCutThroughType Specifies whether the BGP to MPLS cut through being used is an LSP or an LSP group.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.101.9.1.23
rcIpBgpPeerBgpMplsCutThroughId The ID of LSP or LSP group being used for BGP to MPLS cut through.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.24
rcIpBgpPeerState The BGP peer connection state.	Enumeration Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.9.1.25
rcIpBgpPeerLastError The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte …	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.9.1.26
rcIpBgpPeerVpnv4Address The vpnv4 routes specified.	EnableValuer/w Constraints: range: 0-64 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.27
rcIpBgpPeerIpvpnLiteCap The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.28
rcIpBgpPeerSooAddress The site-of-origin ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.9.1.29
rcIpBgpPeerSooAsNumber The asnum for the site-of-origin for bgp peer.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.30
rcIpBgpPeerSooAssignedNum The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.31
rcIpBgpPeerSooType The soo type can be asnum or ipaddress.	Enumeration	.1.3.6.1.4.1.2272.1.8.101.9.1.32
rcIpBgpPeerRouteRefresh Route refresh for bgp peer.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.33
rcIpBgpPeerAsOverride The AS Override value can be enabled or disabled for bgp peer.	EnableValuer/w Constraints: range: 0-65535 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.34
rcIpBgpPeerAllowAsIn The number of as-in allowed for bgp peer	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.9.1.35
rcIpBgpPeerBfdEnable BFD Admin state flag.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.9.1.36

rcIpBgpPeerGroupTable

table

.1.3.6.1.4.1.2272.1.8.101.11 · 1 row entry · 41 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpPeerGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpPeerGroupTable'

Copy

IP rcIpBgp Peer Group table. This table contains rows
which are template configuration parameters which are
shared by a group of peers. Peers belonging to the
same group will refer to the same row in this table
using a peer group name

rcIpBgpPeerGroupEntry row .1.3.6.1.4.1.2272.1.8.101.11.1

An entry of Ip rcIpBgp Peer Group Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpPeerGroupEnable Allows disabling a group of peers	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.1
rcIpBgpPeerGroupIndex Index in to the Peer Group Table	Integer32	.1.3.6.1.4.1.2272.1.8.101.11.1.2
rcIpBgpPeerGroupGroupName Name of the BGP peer group to which this neighbor belong	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.11.1.3
rcIpBgpPeerGroupRemoteAs Remote Autonomous system number of this peer group (optional)	Integer32r/w Constraints: range: 5-120	.1.3.6.1.4.1.2272.1.8.101.11.1.4
rcIpBgpPeerGroupDefaultOriginate Enabling this attribute allows a BGP speaker (the local router) to send the default route 0.0.0.0 to the group of neighbors for use as a default route.	Enumerationr/w Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.8.101.11.1.5
rcIpBgpPeerGroupEbgpMultiHop To accept and attempt BGP connections to external peers residing on networks that are not directly connected	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.101.11.1.6
rcIpBgpPeerGroupAdvertisementInterval To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 1 to 120.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.101.11.1.7
rcIpBgpPeerGroupKeepAlive To set the time interval in seconds between the sending of BGP keep alive messages to remote peers.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.8
rcIpBgpPeerGroupHoldTime To configure the hold time for the group of peers in seconds. Usually set to three times the value of the Keepalive time	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.11.1.9
rcIpBgpPeerGroupWeight To assign an absolute weight to a BGP network. Absolute weight, or importance. It can be an integer from 0 to 65535.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.11.1.10
rcIpBgpPeerGroupMaxPrefix Sets a limit on the number of routes that will be accepted from this group of neighbors. A value of zero indicates no limit	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.11
rcIpBgpPeerGroupNextHopSelf Set NextHop Attribute to local router address before sending updates to remote peers	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.11.1.12
rcIpBgpPeerGroupRoutePolicyIn Route Policy Name that will be applied to all networks learned from this group of peers	OctetStringr/w Enumerated Values: 1 in 2 out 3 none	.1.3.6.1.4.1.2272.1.8.101.11.1.13
rcIpBgpPeerGroupRoutePolicyOut Route policy name that will be applied to all outgoing updates to this group of peers	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.11.1.14
rcIpBgpPeerGroupRouteReflectorClient Indicates whether this group of peers is a route reflector client.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.11.1.15
rcIpBgpPeerGroupSoftReconfigurationIn If Peer soft reconfiguration is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconfig-in causes all bgp routes to be stored…	EnableValuer/w Constraints: range: 0-511 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.16
rcIpBgpPeerGroupSoftReconfiguration If Peer soft reconfiguration-in is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcIpBgpPeerGroupSoftReconfiguration to in(1). S…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.101.11.1.17
rcIpBgpPeerGroupPassword To enable MD5 authentication on TCP connections between this local speaker and this group of BGP peers. Case-sensitive password of up to 80 character	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.11.1.18
rcIpBgpPeerGroupRemovePrivateAs Enable and disable private AS number from being stripped when sending an update	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.19
rcIpBgpPeerGroupRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.11.1.20
rcIpBgpPeerGroupMD5Authentication Enable and Disable MD5 authentication	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.21
rcIpBgpPeerGroupSendCommunity Enables or disables sending the update message community attribute to the specified peer.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.22
rcIpBgpPeerGroupUpdateSourceInterface The IP address to used for circuitless IP for this peer group.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.101.11.1.23
rcIpBgpPeerGroupVpnv4Address The vpnv4 routes specified.	EnableValuer/w Constraints: range: 0-2147483647 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.24
rcIpBgpPeerGroupIpvpnLiteCap The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group.	EnableValuer/w Enumerated Values: 0 none 1 asnum 2 ipaddr	.1.3.6.1.4.1.2272.1.8.101.11.1.25
rcIpBgpPeerGroupSooAddress The site-of-origin ipaddress.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.11.1.26
rcIpBgpPeerGroupSooAsNumber The asnum for site-of-origin for bgp peer group.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.27
rcIpBgpPeerGroupSooAssignedNum The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer group.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.2272.1.8.101.11.1.28
rcIpBgpPeerGroupSooType The soo type can be asnum or ipaddress.	Enumeration Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.101.11.1.29
rcIpBgpPeerGroupRouteRefresh Route refresh for bgp peer group.	EnableValuer/w Constraints: range: 0-64 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.30
rcIpBgpPeerGroupAsOverride The AS Override value can be enabled or disabled for bgp peer group.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.31
rcIpBgpPeerGroupAllowAsIn The number of as-in allowed for bgp peer group.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.32
rcIpBgpPeerGroupDefaultOriginateIpv6 Enabling this attribute allows a BGP speaker (the local router) to send the default route to the group of neighbors for use as a default route.	SNMPv2-TCTruthValuer/w Constraints: range: 1-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.11.1.33
rcIpBgpPeerGroupAfUpdateSourceInterfaceType The Inet address type used for circuitless IP for this peer group.	INET-ADDRESS-MIBInetAddressTyper/w Constraints: range: 0-0 range: 3-65535 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.11.1.34
rcIpBgpPeerGroupAfUpdateSourceInterface The Inet address to used for circuitless IP for this peer group.	INET-ADDRESS-MIBInetAddressr/w Constraints: range: 0-21845	.1.3.6.1.4.1.2272.1.8.101.11.1.35
rcIpBgpPeerGroupIpv6Cap The ipv6 capability can be enabled or disabled on the bgp neighbor peer group.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.101.11.1.36
rcIpBgpPeerGroupIpv6RoutePolicyIn Ipv6 Route Policy Name that will be applied to all networks learned from this group of peers	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.2272.1.8.101.11.1.37
rcIpBgpPeerGroupIpv6RoutePolicyOut Ipv6 Route policy name that will be applied to all outgoing updates to this group of peers	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.11.1.38
rcIpBgpPeerGroupBfdEnable Bfd can be enabled or disabled for bgp peer group.	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.11.1.39
rcIpBgpPeerGroupDebugMask value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.40
rcIpBgpPeerGroupIpv6MaxPrefix Sets a limit on the number of IPv6 routes that will be accepted from this group of neighbors. A value of zero indicates no limit	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.11.1.41

rcIpBgpRcvdDampenedPathAttrTable

table

.1.3.6.1.4.1.2272.1.8.101.13 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpRcvdDampenedPathAttrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpRcvdDampenedPathAttrTable'

Copy

This table contains info about paths to destination
networks received from all BGP-4 peers

rcIpBgpDampenedPathAttrEntry row .1.3.6.1.4.1.2272.1.8.101.13.1

Information about a path to a networks

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpPathAttrPeer The IP address of the peer where the path info was learned	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.13.1.1
rcIpBgpPathAttrIpAddrPrefixLen Length in bits of the IP address prefix in the network Layer Reachablity Information field.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.101.13.1.2
rcIpBgpPathAttrIpAddrPrefix An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen are zeroed.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.13.1.3
rcIpBgpPathAttrFlapPenalty Penalty value based on number of route flaps	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.101.13.1.4
rcIpBgpPathAttrFlapCount Number of times a route flapped since the last time the penalty was reset to zero	SNMPv2-SMIInteger32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.8.101.13.1.5
rcIpBgpPathAttrRouteDampened Shows whether this route is currently suppressed from being announced	Enumeration	.1.3.6.1.4.1.2272.1.8.101.13.1.6
rcIpBgpPathAttrReuseTime Re use time is the system configured time for route reuse	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.101.13.1.7
rcIpBgpPathAttrReuseTimeRemain Re use time Remain is the number of seconds before the route will be reused	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.101.13.1.8

rcIpBgp4PathAttrTable

table

.1.3.6.1.4.1.2272.1.8.101.15 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgp4PathAttrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgp4PathAttrTable'

Copy

This table contains info about paths to destination
networks received from all BGP-4 peers

rcIpBgp4PathAttrEntry row .1.3.6.1.4.1.2272.1.8.101.15.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgp4PathAttrPeer The IP address of the peer where the path info was learned	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.15.1.1
rcIpBgp4PathAttrIpAddrPrefixLen Length in bits of the IP address prefix in the network Layer Reachablity Information field.	Integer32	.1.3.6.1.4.1.2272.1.8.101.15.1.2
rcIpBgp4PathAttrIpAddrPrefix An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen are zeroed.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.15.1.3
rcIpBgp4PathAttrCommunities The string represents community path attributes as <length,value> The length is a 1-octet field containing the numbner of community numbers in the value field.The value field contains one or more Community numbers,each …	OctetString	.1.3.6.1.4.1.2272.1.8.101.15.1.4
rcIpBgp4PathAttrOriginateId The IP address of the route who originates the routes	SNMPv2-SMIIpAddress Enumerated Values: 1 halted 2 running Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.15.1.5
rcIpBgp4PathAttrClusterId The string represents Cluster Id path attributes as <length,value> The length is a 1-octet field containing the number of Cluster Id numbers in the value field.The value field contains one or more Cluster Id numbers,eac…	OctetString Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.4.1.2272.1.8.101.15.1.6

rcIpBgpExtAggregateAfTable

table

.1.3.6.1.4.1.2272.1.8.101.16.2 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpExtAggregateAfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpExtAggregateAfTable'

Copy

Replaces rcIpBgpAggregateTable.
To specify the list of ipv4 and ipv6 aggregate
prefixes to be created  by the BGP routing process
and the options to be used while aggregating.

rcIpBgpExtAggregateAfEntry row .1.3.6.1.4.1.2272.1.8.101.16.2.1

An entry of v4/v6 aggregate prefix to be created by
BGP routing process and the options to be used
while aggregating.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpExtAggregateAfAddressType Inet Address Type of aggregate address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.16.2.1.1
rcIpBgpExtAggregateAfAddress V4 or V6 Prefix to create an aggregate address in BGP routing table.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.16.2.1.2
rcIpBgpExtAggregateAfPrefixLen Prefix length of the aggregate inet address	INET-ADDRESS-MIBInetAddressPrefixLength Constraints: range: 1-1	.1.3.6.1.4.1.2272.1.8.101.16.2.1.3
rcIpBgpExtAggregateAfAsSetGenerate Enable Generates autonomous system set path information.	SNMPv2-TCTruthValuer/w Constraints: range: 1-1 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.2.1.4
rcIpBgpExtAggregateAfSummaryOnly Filters all more specific routes from updates.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.2.1.5
rcIpBgpExtAggregateAfSuppressPolicy Name of route policy used to select the routes to be suppressed.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.2.1.6
rcIpBgpExtAggregateAfAdvertisePolicy Name of route policy used to select the routes to create AS-SET origin communities.	OctetStringr/w Constraints: range: 0-4075	.1.3.6.1.4.1.2272.1.8.101.16.2.1.7
rcIpBgpExtAggregateAfAttributePolicy Name of route policy used to set the attribute of the aggregate route.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.2272.1.8.101.16.2.1.8
rcIpBgpExtAggregateAfRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Constraints: range: 1-1 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.16.2.1.9

rcIpBgpExtNetworkAfTable

table

.1.3.6.1.4.1.2272.1.8.101.16.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpExtNetworkAfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpExtNetworkAfTable'

Copy

This table replaces rcIpBgpNetworkTable.
This table supports V4 and V6 BGP networks.
The networks in this table are either
static/directly connected or learned routes.
Bgp advertises these network provided they are
reachable and are in the IP routing table

rcIpBgpExtNetworkAfEntry row .1.3.6.1.4.1.2272.1.8.101.16.4.1

An entry in bgp NetworkTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpExtNetworkAfAddrType Inet address type of the Network prefix that BGP will advertise.	INET-ADDRESS-MIBInetAddressType Constraints: range: 0-4075 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.16.4.1.1
rcIpBgpExtNetworkAfAddr v4/v6 Network prefix that BGP will advertise.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.16.4.1.2
rcIpBgpExtNetworkAfPrefixLen Prefix length of the v4/v6 bgp network address	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.8.101.16.4.1.3
rcIpBgpExtNetworkAfMetric Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp Peers.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.4.1.4
rcIpBgpExtNetworkAfRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.16.4.1.5

rcIpBgpExtPeerAfTable

table

.1.3.6.1.4.1.2272.1.8.101.16.6 · 1 row entry · 40 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpExtPeerAfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpExtPeerAfTable'

Copy

Extension to the BGP peer table.  This table contains,
one entry per BGP peer, information about the connections
with BGP Peers, which is not supported by the standard
MIB draft. This table replaces rcIpBgpPeerTable.

rcIpBgpExtPeerAfEntry row .1.3.6.1.4.1.2272.1.8.101.16.6.1

Entry containing miscelleneous information (info not
present in the standard BGP peer table) about the
connection with a remote BGP peer .

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpExtPeerAfGroupName Peer group name to which this peer belongs (optional)	OctetStringr/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.101.16.6.1.1
rcIpBgpExtPeerAfDefaultOriginate To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 3-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.2
rcIpBgpExtPeerAfDefaultOriginateIpv6 To allow a BGP speaker (the local router) to Send the default ipv6 route to a neighbor for use as a default route	SNMPv2-TCTruthValuer/w Constraints: range: 0-21845 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.3
rcIpBgpExtPeerAfEbgpMultiHop To accept and attempt BGP connections to external peers residing on networks that are not directly connected	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.4
rcIpBgpExtPeerAfAdvertisementInterval To set the minimum interval between the sending Of BGP routing updates Time in seconds. Integer from 5 to 120.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.101.16.6.1.5
rcIpBgpExtPeerAfPassword To enable MD5 authentication on a TCP connection between two BGP Peers Case-sensitive password of up to 80 character	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.6
rcIpBgpExtPeerAfWeight To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.7
rcIpBgpExtPeerAfMaxPrefix Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit	Integer32r/w Constraints: range: 0-0 range: 3-65535	.1.3.6.1.4.1.2272.1.8.101.16.6.1.8
rcIpBgpExtPeerAfNextHopSelf Set NextHop Attribute to local router address Before sending updates to remote peer	SNMPv2-TCTruthValuer/w Constraints: range: 0-21845 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.9
rcIpBgpExtPeerAfRoutePolicyIn Route Policy Name that will be applied to all Networks learned from this peer	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.10
rcIpBgpExtPeerAfRoutePolicyOut Route policy name that will be applied to all outgoing updates	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.11
rcIpBgpExtPeerAfRouteReflectorClient Indicates whether this peer is a route reflector client.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.12
rcIpBgpExtPeerAfSoftReconfigurationIn If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconfig-in causes all bgp routes to be stor…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.13
rcIpBgpExtPeerAfSoftReconfiguration If rcIpBgpExtPeerAfSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcIpBgpExtPeerAfSoftReconfiguration…	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.14
rcIpBgpExtPeerAfRemovePrivateAs Enable and disable private AS number from being stripped when sending an update	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.15
rcIpBgpExtPeerAfMD5Authentication Enable and Disable MD5 authentication	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.16
rcIpBgpExtPeerAfDebugMask value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), …	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.17
rcIpBgpExtPeerAfSendCommunity Enables or disables sending the update message community attribute to the specified peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.18
rcIpBgpExtPeerAfUpdateSourceInterface The Inet address to be used for Circuitless IP.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.16.6.1.19
rcIpBgpExtPeerAfVpnv4Address The vpnv4 routes specified.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.20
rcIpBgpExtPeerAfIpv6Cap The ipv6 capability can be enabled or disabled on the bgp neighbor peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.21
rcIpBgpExtPeerAfIpvpnLiteCap The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.22
rcIpBgpExtPeerAfSooAddress The site-of-origin ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.16.6.1.23
rcIpBgpExtPeerAfSooAsNumber The asnum for the site-of-origin for bgp peer.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.24
rcIpBgpExtPeerAfSooAssignedNum The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.25
rcIpBgpExtPeerAfSooType The soo type can be asnum or ipaddress.	Enumeration	.1.3.6.1.4.1.2272.1.8.101.16.6.1.26
rcIpBgpExtPeerAfRouteRefresh Route refresh for bgp peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.27
rcIpBgpExtPeerAfAsOverride The AS Override value can be enabled or disabled for bgp peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.28
rcIpBgpExtPeerAfAllowAsIn The number of as-in allowed for bgp peer.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.29
rcIpBgpExtPeerAfIpv6RoutePolicyIn Ipv6 Route Policy Name that will be applied to all Networks learned from this peer	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.30
rcIpBgpExtPeerAfIpv6RoutePolicyOut Ipv6 Route policy name that will be applied to all outgoing updates	OctetStringr/w Enumerated Values: 1 igp 2 egp 3 incomplete	.1.3.6.1.4.1.2272.1.8.101.16.6.1.31
rcIpBgpExtPeerAfEnable Used to enable/disable bgp+ peer	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.32
rcIpBgpExtPeerAfRemoteAs Used to manually configure the remote as of the bgp+ peer.	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w Constraints: range: 4-20	.1.3.6.1.4.1.2272.1.8.101.16.6.1.33
rcIpBgpExtPeerAfConnectRetryInterval Used to configure the ConnectRetry timer for the BGP+ peer.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.34
rcIpBgpExtPeerAfHoldTimeConfigured Used to configure the Hold Timer for the BGP+ peer.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.35
rcIpBgpExtPeerAfKeepAliveConfigured Used to configure the KeepAlive Timer for the BGP+ peer.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.36
rcIpBgpExtPeerAfRowStatus Used to create/delete entries in the Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.101.16.6.1.37
rcIpBgpExtPeerAfNewRemoteAs Remote Autonomous system number of this peer	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.38
rcIpBgpExtPeerAfBfdEnable BFD Admin state flag.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 atomicAggregatePresent 2 atomicAggregateMissing Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.16.6.1.39
rcIpBgpExtPeerAfIpv6MaxPrefix Sets a limit on the number of ipv6 routes that will be accepted from a neighbor. A value of zero indicates no limit	Integer32r/w	.1.3.6.1.4.1.2272.1.8.101.16.6.1.40

rcIpBgpExtAfPathAttrTable

table

.1.3.6.1.4.1.2272.1.8.101.16.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpExtAfPathAttrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpExtAfPathAttrTable'

Copy

Extension to rcIpBgpTmpAfPathAttrTable. This table contains
info about additional BGP path attributes not covered in 
rcIpBgpTmpAfPathAttrTable.

rcIpBgpExtAfPathAttrEntry row .1.3.6.1.4.1.2272.1.8.101.16.7.1

Each entry contains data about additional path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpExtAfPathAttrUnknown Replaces bgp4PathAttrUnknown. One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this …	OctetString	.1.3.6.1.4.1.2272.1.8.101.16.7.1.1
rcIpBgpExtAfPathAttrCommunities The string represents BGP+ community path attributes as <length ,value>. The length is a 1-octet field containing the numbner of community numbers in the value field.The value field contains one or more Community num…	OctetString	.1.3.6.1.4.1.2272.1.8.101.16.7.1.2
rcIpBgpExtAfPathAttrOriginateId In a BGP+ context, the IP address of the router which originates the routes.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.16.7.1.3
rcIpBgpExtAfPathAttrClusterId The string represents BGP+ Cluster Id path attributes as <length,value>. The length is a 1-octet field containing the number of Cluster Id numbers in the value field. The value field contains one or more Cluster Id n…	OctetString	.1.3.6.1.4.1.2272.1.8.101.16.7.1.4

rcIpBgpTmpPeerAfTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.1 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfTable'

Copy

BGP peer table.  This table contains, one entry per BGP
peer, information about the connections with BGP peers.
          
This table replaces bgpPeerTable.

rcIpBgpTmpPeerAfEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.1.1

Entry containing information about the connection with
a remote BGP peer.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpPeerAfInstance The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes routers running BGP/MPLS IP Virtual Private Networks. …	Unsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.1
rcIpBgpTmpPeerAfLocalAddrType The address family of the local end of the peering session.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.2
rcIpBgpTmpPeerAfLocalAddr The local IP address of this entry's BGP connection.	INET-ADDRESS-MIBInetAddress Enumerated Values: 1 independent 2 ordered Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.3
rcIpBgpTmpPeerAfRemoteAddrType The address family of the remote end of the peering session.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 conservative 2 liberal	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.4
rcIpBgpTmpPeerAfRemoteAddr The remote IP address of this entry's BGP peer.	INET-ADDRESS-MIBInetAddress Enumerated Values: 1 immediate 2 notImmediate Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.5
rcIpBgpTmpPeerAfLocalPort The local port for the TCP connection between the BGP peers.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.6
rcIpBgpTmpPeerAfLocalAs Some implementations of BGP can represent themselves as multiple ASes. This is the AS that this peering session is representing itself as to the remote peer.	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.7
rcIpBgpTmpPeerAfRemotePort The remote port for the TCP connection between the BGP peers. Note that the objects rcIpBgpTmpPeerAfLocalAddr, rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemoteAddr and rcIpBgpTmpPeerAfRemotePort provide …	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.8
rcIpBgpTmpPeerAfRemoteAs The remote autonomous system number received in the BGP OPEN message.	INET-ADDRESS-MIBInetAutonomousSystemNumber Enumerated Values: 1 requestNever 2 requestWhenNeeded 3 requestOnRequest	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.9
rcIpBgpTmpPeerAfIdentifier The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the rcIpBgpTmpPeerAfPeerState is in the openconfirm or the established state.	RcIpBgpTmpIdentifierTC Enumerated Values: 1 downstreamOnDemand 2 downstreamUnsolicited Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.10
rcIpBgpTmpPeerAfAdminStatus Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The r…	Enumeration Constraints: range: 64-1518	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.11
rcIpBgpTmpPeerAfPeerState The BGP peer connection state.	Enumeration Enumerated Values: 1 ldp 2 rsvp 3 both	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.12
rcIpBgpTmpPeerAfConfiguredVersion The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.	Unsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.13
rcIpBgpTmpPeerAfNegotiatedVersion The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the rcIpBgpTmpPeerAfState is in the openconfirm or the established state. Note that legal val…	Unsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.1.1.14

rcIpBgpTmpPeerAfErrorsTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.2.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfErrorsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfErrorsTable'

Copy

On a per-peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer
exists in this table, then no such errors have been
observed, reported, and recorded on the session.

rcIpBgpTmpPeerAfErrorsEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1

Each entry contains information about errors sent
and received for a particular BGP peer.

Indexes

rcIpMplsLdpInterfaceLay3Addr rcIpMplsLdpInterfaceLay3Mask

Column	Syntax	OID
rcIpBgpTmpPeerAfLastErrorCodeReceived The last error code received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.1
rcIpBgpTmpPeerAfLastErrorSubCodeReceived The last subcode received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.2
rcIpBgpTmpPeerAfLastErrorReceivedTime The timestamp that the last NOTIFICATION was received from this peer.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.3
rcIpBgpTmpPeerAfLastErrorReceivedText This object contains an implementation specific explanation of the error that was reported.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.4
rcIpBgpTmpPeerAfLastErrorReceivedData The last error code's data seen by this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this data may be truncated.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.5
rcIpBgpTmpPeerAfLastErrorCodeSent The last error code sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.6
rcIpBgpTmpPeerAfLastErrorSubCodeSent The last subcode sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.7
rcIpBgpTmpPeerAfLastErrorSentTime The timestamp that the last NOTIFICATION was sent to this peer.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.8
rcIpBgpTmpPeerAfLastErrorSentText This object contains an implementation specific explanation of the error that is being reported.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.9
rcIpBgpTmpPeerAfLastErrorSentData The last error code's data sent to this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this data may be truncated.	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.10

rcIpBgpTmpPeerAfEventTimesTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.3.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfEventTimesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfEventTimesTable'

Copy

A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the established state.

rcIpBgpTmpPeerAfEventTimesEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1

Each row contains a set of statistics about time
spent and events encountered in the peer session
established state.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpPeerAfFsmEstablishedTime This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set to zero when a new peer is configured or when the router i…	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.1
rcIpBgpTmpPeerAfInUpdatesElapsedTime Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0).	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.2

rcIpBgpTmpPeerAfConfiguredTimersTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.3.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfConfiguredTimersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfConfiguredTimersTable'

Copy

Per peer management data on BGP session timers.

rcIpBgpTmpPeerAfConfiguredTimersEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1

Each entry corresponds to the current state of
BGP timers on a given peering session.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpPeerAfConnectRetryInterval Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds.	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.1
rcIpBgpTmpPeerAfHoldTimeConfigured Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the values in bgpPeerHoldTimeConfigured and the Hold Time receiv…	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.2
rcIpBgpTmpPeerAfKeepAliveConfigured Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPe…	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.3
rcIpBgpTmpPeerAfMinASOrigInterval Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.4
rcIpBgpTmpPeerAfMinRouteAdverInterval Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for IBGP connections.	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.5

rcIpBgpTmpPeerAfNegotiatedTimersTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.3.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfNegotiatedTimersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfNegotiatedTimersTable'

Copy

Configured values of per-peer timers are seen
in the rcIpBgpTmpPeerAfConfiguredTimersTable.
Values in this table reflect the current
operational values, after negotiation from values
derived from initial configuration.

rcIpBgpTmpPeerAfNegotiatedTimersEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1

Each entry reflects a value of the currently
operational, negotiated timer as reflected in the
rcIpBgpTmpPeerAfNegotiatedTimersEntry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpPeerAfHoldTime The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages …	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.1
rcIpBgpTmpPeerAfKeepAlive Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with rcIpBgpTmpPeerAfHoldTime, it has the same proportion a…	secondsUnsigned32	.1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.2

rcIpBgpTmpPeerAfCountersTable

table

.1.3.6.1.4.1.2272.1.8.101.17.10.4.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpPeerAfCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpPeerAfCountersTable'

Copy

The counters associated with a BGP Peer.

rcIpBgpTmpPeerAfCountersEntry row .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1

Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpPeerAfInUpdates The number of BGP UPDATE messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.1
rcIpBgpTmpPeerAfOutUpdates The number of BGP UPDATE messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.2
rcIpBgpTmpPeerAfInTotalMessages The total number of messages received from the remote peer on this connection.	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.3
rcIpBgpTmpPeerAfOutTotalMessages The total number of messages transmitted to the remote peer on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.4
rcIpBgpTmpPeerAfFsmEstablishedTransitions The total number of times the BGP FSM transitioned into the established state for this peer.	SNMPv2-SMICounter32 Enumerated Values: 0 none 1 addTunnel 2 remTunnel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.5

rcIpBgpTmpNlriTable

table

.1.3.6.1.4.1.2272.1.8.101.17.11.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpNlriTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpNlriTable'

Copy

The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
rcIpBgpTmpNlriBest is true represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In.

rcIpBgpTmpNlriEntry row .1.3.6.1.4.1.2272.1.8.101.17.11.1.1

Information about a path to a network.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpNlriIndex This index allows for multiple instances of a base prefix for a certain AFI-SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.1
rcIpBgpTmpNlriAfi The address family of the prefix for this NLRI. Note that the AFI is not necessarily equivalent to the an InetAddressType.	RcIpBgpTmpAddressFamilyIdentifierTC Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.2
rcIpBgpTmpNlriSafi The subsequent address family of the prefix for this NLRI	RcIpBgpTmpSubsequentAddressFamilyIdentifierTC Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.3
rcIpBgpTmpNlriPrefixType The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the rcIpBgpTmpNlriAfi field. Where an appropriate InetAddressTyp…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.4
rcIpBgpTmpNlriPrefix An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by rcIpBgpTmpAfPathAttrAddrPrefixLen. Any bits beyond the length specifi…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.5
rcIpBgpTmpNlriPrefixLen Length in bits of the address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.6
rcIpBgpTmpNlriBest An indication of whether or not this route was chosen as the best BGP4 route for this destination.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.7
rcIpBgpTmpNlriCalcLocalPref The degree of preference calculated by the receiving BGP4 speaker for an advertised route. In the case where this prefix is ineligible, this object will be absent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.8
rcIpBgpTmpAfPathAttrIndex This value is a unique index for entries in the rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathAttrTable row entry. While its value is guaranteed to be unique at a…	SNMPv2-SMIUnsigned32 Enumerated Values: 0 none 1 ospf Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.9
rcIpBgpTmpAfPathAttrUnknownIndex This value is a unique index for entries in the rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathAttrUnknownTable row entry. While its value is guaranteed to…	SNMPv2-SMIUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.101.17.11.1.1.10

rcIpBgpTmpAfPathAttrTable

table

.1.3.6.1.4.1.2272.1.8.101.17.11.4 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpBgpTmpAfPathAttrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpBgpTmpAfPathAttrTable'

Copy

Provides per advertised network-prefix attribute data,
as advertised over a peering session.

rcIpBgpTmpAfPathAttrEntry row .1.3.6.1.4.1.2272.1.8.101.17.11.4.1

Each entry contains data about path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpBgpTmpAfPathAttrOrigin The ultimate origin of the path information.	Enumeration Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.1
rcIpBgpTmpAfPathAttrNextHopAddrType The address family of the address for the border router that should be used to access the destination network.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.2
rcIpBgpTmpAfPathAttrNextHopAddr The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet associated with this prefix. Note that for RFC2545…	OctetString	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.3
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType The address type for IPv6 link local addresses. This is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP implementations that do not support IPv6.	INET-ADDRESS-MIBInetAddressType Constraints: range: 1-65535 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.4
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddr This value contains an IPv6 link local address and is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP implementations that do not support IPv6.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.5
rcIpBgpTmpAfPathAttrMedPresent This value is true when the MED value was sent in the UPDATE message.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.6
rcIpBgpTmpAfPathAttrMed This metric is used to discriminate between multiple exit points to an adjacent autonomous system. When the MED value is absent but has a calculated default value, this object will contain the calculated value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.7
rcIpBgpTmpAfPathAttrLocalPref The originating BGP4 speakers degree of preference for an advertised route. If the route was not sent with a LOCAL_PREF value, this object will be absent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.8
rcIpBgpTmpAfPathAttrAtomicAggregate When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.	Enumeration	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.9
rcIpBgpTmpAfPathAttrAggregatorAS The AS number of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the conceptual row.	INET-ADDRESS-MIBInetAutonomousSystemNumber	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.10
rcIpBgpTmpAfPathAttrAggregatorAddr The IP address of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the conceptual row.	RcIpBgpTmpIdentifierTC Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.11
rcIpBgpTmpAsPathCalcLength This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.12
rcIpBgpTmpAsPathIndex This value is a unique index for the decomposed AS Path in the rcIpBgpTmpAsPathTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAsPathTable row entry. While its value is guaranteed to be uniq…	SNMPv2-SMIUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.13
rcIpBgpTmpAsPathString This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator reada…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.101.17.11.4.1.14

rcIpMplsInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.102.3 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsInterfaceTable'

Copy

Table of configured Mpls Interfaces.

rcIpMplsInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.3.1

An entry of rcIpMpls Interfaces In Table.

Indexes

rcIpMplsTunnelFrrListIndex

Column	Syntax	OID
rcIpMplsInterfaceLay3Addr Layer 3 address for the MPLS interface.	SNMPv2-SMIIpAddress Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.102.3.1.1
rcIpMplsInterfaceLay3Mask Layer 3 mask for the MPLS interface.	SNMPv2-SMIIpAddress Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.8.102.3.1.2
rcIpMplsInterfaceIndex Interface index for the IP interface.	SNMPv2-SMIInteger32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.8.102.3.1.3
rcIpMplsInterfaceAdminStatus Indicates whether the MPLS interface is enabled or not.	EnableValuer/w Constraints: range: 0-255 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.102.3.1.4
rcIpMplsInterfaceIndLblDistMode Indicates if the label distribution mode is independent or ordered.	Enumerationr/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.102.3.1.5
rcIpMplsInterfaceConsLblRetenMode Indicates if conservative or liberal retention mode is used for the MPLS interface.	Enumerationr/w Enumerated Values: 0 oneToOneBackup 1 facilityBackup	.1.3.6.1.4.1.2272.1.8.102.3.1.6
rcIpMplsInterfaceImdLblUseMode Indicates what label-use-mode is used by the MPLS interface.	Enumerationr/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.8.102.3.1.7
rcIpMplsInterfaceNoRouteReqRetryMode Not used in this release.	SNMPv2-TCTruthValuer/w Constraints: range: 4-4 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.3.1.8
rcIpMplsInterfacePenultimatePopRequest Flag to indicate whether to give implicit NULL labels for local networks.	SNMPv2-TCTruthValuer/w Constraints: range: 4-4 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.3.1.9
rcIpMplsInterfacePropogateLabelReleaseRequest Not used in this release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.3.1.10
rcIpMplsInterfaceLabelRequestMode Indicates the label requiest mode used by the MPLS interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.3.1.11
rcIpMplsInterfaceOnDemandAdvMode Indicates the label advertise mode used by the MPLS interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.3.1.12
rcIpMplsInterfaceMtu Not used in this release.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.3.1.13
rcIpMplsInterfaceLabelProtocol Indicates the label protocol used by the interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.3.1.14
rcIpMplsInterfaceTraceFlag Flag used for tracing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.3.1.15
rcIpMplsInterfaceRowStatus Row Status for create/delete	SNMPv2-TCRowStatusr/w Constraints: range: 0-32 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.3.1.16

rcIpMplsLdpInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.102.7 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsLdpInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsLdpInterfaceTable'

Copy

Table of configured Mpls LDP Interfaces.

rcIpMplsLdpInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.7.1

An entry of rcIpMpls LDP Interfaces In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsLdpInterfaceLay3Addr Layer 3 address of LDP interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.7.1.1
rcIpMplsLdpInterfaceLay3Mask Layer3 mask for LDP interface.	SNMPv2-SMIIpAddress Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.102.7.1.2
rcIpMplsLdpInterfaceIndex Interface index for LDP interface.	SNMPv2-SMIInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.102.7.1.3
rcIpMplsLdpInterfaceTargetHelloFlag Flag for enabling target hellos.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.7.1.4
rcIpMplsLdpInterfaceTargetResponseFlag Flag to enable target response messgaes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.7.1.5
rcIpMplsLdpInterfaceNonTtlLspFlag Not used in this release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.7.1.6
rcIpMplsLdpInterfaceRowStatus Row status for the LDP interface.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 head 2 transit 3 tail Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.7.1.7

rcIpMplsRsvpInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.102.9 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsRsvpInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsRsvpInterfaceTable'

Copy

Table of configured Mpls RSVP Interfaces.

rcIpMplsRsvpInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.9.1

An entry of rcIpMpls RSVP Interfaces In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsRsvpInterfaceLay3Addr Layer 3 address for RSVP interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.9.1.1
rcIpMplsRsvpInterfaceLay3Mask Layer 3 mask for RSVP interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.9.1.2
rcIpMplsRsvpInterfaceIndex Index for RSVP interface table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.102.9.1.3
rcIpMplsRsvpInterfaceAuthFlag Not used in this release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.4
rcIpMplsRsvpInterfaceHelloFlag Flag to enable RSVP interface hello.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.5
rcIpMplsRsvpInterfaceRefreshReductionFlag Not used in this release.	SNMPv2-TCTruthValuer/w Constraints: range: 0-6142 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.6
rcIpMplsRsvpInterfaceMemoryReductionFlag Not used in this release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.7
rcIpMplsRsvpInterfaceReliableFlag Not used in this release.	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 15-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.8
rcIpMplsRsvpInterfaceEPolicingFlag Not used in this release.	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 5-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.9.1.9
rcIpMplsRsvpInterfaceRowStatus Row status for RSVP interface.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 interface 2 router-id Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.9.1.10

rcIpMplsLdpTargetAddrTable

table

.1.3.6.1.4.1.2272.1.8.102.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsLdpTargetAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsLdpTargetAddrTable'

Copy

Table of configured Mpls LDP target addresses.

rcIpMplsLdpTargetAddrEntry row .1.3.6.1.4.1.2272.1.8.102.11.1

An entry of rcIpMpls LDP target addresses In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsLdpTargetAddrBaseAddr The LDP interface IP address for which target address should be configured	SNMPv2-SMIIpAddress Enumerated Values: 1 enable 2 disable 3 global Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.11.1.1
rcIpMplsLdpTargetAddrTgtAddr The IP address configured to be the LDP target address	SNMPv2-SMIIpAddress Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.102.11.1.2
rcIpMplsLdpTargetAddrRowStatus Row Status for LDP target address table.	SNMPv2-TCRowStatusr/w Constraints: range: 0-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.11.1.3

rcIpMplsTunnelGroupTable

table

.1.3.6.1.4.1.2272.1.8.102.12 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTunnelGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTunnelGroupTable'

Copy

Table of Tunnel Groups.

rcIpMplsTunnelGroupEntry row .1.3.6.1.4.1.2272.1.8.102.12.1

An entry of rcIpMpls tunnel group In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTunnelGroupId Tunnel Group Identifier	Integer32 Constraints: range: 64-9600	.1.3.6.1.4.1.2272.1.8.102.12.1.1
rcIpMplsTunnelGroupDestAddr Group the tunnels with same destination IP address into the tunnel group	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.12.1.2
rcIpMplsTunnelGroupPrimaryTunnel List of primary tunnels contained in the tunnel group, diplayed in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>]	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.12.1.3
rcIpMplsTunnelGroupActiveTunnel Active tunnel id in the Tunnel Group	Integer32 Constraints: range: 8-40	.1.3.6.1.4.1.2272.1.8.102.12.1.4
rcIpMplsTunnelGroupPersistentFlag Tunnel Group Persistent Flag	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.12.1.5
rcIpMplsTunnelGroupOperation Add tunnel to the Tunnel Group or remove tunnel from the tunnel group	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.12.1.6
rcIpMplsTunnelGroupTunnelList List of Tunnels contained in the tunnel group, diplayed in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>], such as string 2,4,5 indicated the tunnel group contains tunnel 2, tunnel 4, and tunnel 5	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.12.1.7
rcIpMplsTunnelGroupFtnList List of fecs bineded to the tunnel group, the display format is same as rcIpMplsTunnelGroupTunnelList	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.12.1.8
rcIpMplsTunnelGroupBgpNeighbor BGP neigbors associated with the tunnel group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.102.12.1.9
rcIpMplsTunnelGroupRowStatus Row status for create/delete the tunnel group.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.12.1.10
rcIpMplsTunnelGroupBackupTunnel Backup tunnel id in the Tunnel Group displayed in the format <tunnelId/priority>	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.12.1.11

rcIpMplsTeInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.102.14 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTeInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTeInterfaceTable'

Copy

rcIpMplsInterface Traffic-Eng table. This table 
contains rows which are traffic-eng configuration 
parameters for the link.

rcIpMplsTeInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.14.1

An entry of rcIpMplsInterface Te Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTeInterfaceLay3Addr Layer 3 address for the MPLS interface.	SNMPv2-SMIIpAddress Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.102.14.1.1
rcIpMplsTeInterfaceLay3Mask Layer 3 mask for the MPLS interface.	SNMPv2-SMIIpAddress Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.102.14.1.2
rcIpMplsTeInterfaceIndex Interface index for the IP interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.102.14.1.3
rcIpMplsTeInterfaceIgp Traffic-eng IGP protocol to use on link.	Enumerationr/w Enumerated Values: 0 inactive 1 active	.1.3.6.1.4.1.2272.1.8.102.14.1.4
rcIpMplsTeInterfaceMetric Traffic-eng metric to assign to the link.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.14.1.5
rcIpMplsTeInterfaceMaxBandwidth Maximum bandwidth on the link in bits/sec in the direction outwards from the local system.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.14.1.6
rcIpMplsTeInterfaceMaxReservableBandwidth Maximum reservable bandwidth on the link in bits/sec in the direction outwards from the local system.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.14.1.7
rcIpMplsTeInterfaceResourceColor Resource class/color which represents administrative group membership for the link. The integer value represents the format of a hexadecimal 32-bit mask. A link that is a member of more than one administrative group wi…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.102.14.1.8

rcIpMplsTunnelTable

table

.1.3.6.1.4.1.2272.1.8.102.15 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTunnelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTunnelTable'

Copy

Table of Tunnels with label record info .

rcIpMplsTunnelEntry row .1.3.6.1.4.1.2272.1.8.102.15.1

An entry of rcIpMpls tunnel In Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTunnelId Tunnel Identifier	Integer32	.1.3.6.1.4.1.2272.1.8.102.15.1.1
rcIpMplsTunnelLabelRecordFlag Tunnel Identifier	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.15.1.2
rcIpMplsTunnelRowStatus Creation or deletion of row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.15.1.3

rcIpMplsTunnelExtTable

table

.1.3.6.1.4.1.2272.1.8.102.16 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTunnelExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTunnelExtTable'

Copy

The mplsTunnelExtTable provides enterprise
extension options for a mplsTunnelEntry that has
be created for a MPLS tunnel. The mplsTunnelEntry
must be created apriori.

rcIpMplsTunnelExtEntry row .1.3.6.1.4.1.2272.1.8.102.16.1

An entry of rcIpMpls Tunnel Ext Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTunnelExtIndex Uniquely identifies this row. This an index object for the mplsTunnelExtTable entry that in part also specifies the mpls tunnel entry with which this tunnel extension entry is associated. The value of thi…	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.8.102.16.1.1
rcIpMplsTunnelExtInstance Uniquely identifies an instance of a tunnel's extended entry. This an index object for the mplsTunnelExtTable entry that in part specifies the mpls tunnel with which this tunnel extension entry is associated. Uniquely T…	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.102.16.1.2
rcIpMplsTunnelExtEgressLSRId The purpose of this object is to uniquely identity a tunnel within a network to which this extended tunnel table entry should apply. This an index object for the mplsTunnelExtTable entry that in part specifies the mpls …	MplsLsrId	.1.3.6.1.4.1.2272.1.8.102.16.1.3
rcIpMplsTunnelExtIngressLSRId Specifies the egress LSR id for which this extended tunnel table entry should apply. This is an index object for the mplsTunnelExtTable entry that in part specifies the mpls tunnel with which this tunnel extension entry…	MplsLsrId	.1.3.6.1.4.1.2272.1.8.102.16.1.4
rcIpMplsTunnelExtFrrTableIndex Index into the mplsTunnelFrrTable entry that specifies the frr path to use for the tunnel that implied by the index objects of this row entry. Specifying a frr path to use is optional.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.16.1.5
rcIpMplsTunnelExtRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.16.1.6

rcIpMplsTunnelFrrTable

table

.1.3.6.1.4.1.2272.1.8.102.17 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTunnelFrrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTunnelFrrTable'

Copy

The rcIpMplsTunnelFrrTable is used to indicate the
frr constraints for a frr detour LSP for a tunnel
specified as row entry in the mplsTunnelTable.The
frr constraints are established viasignaling, for
the outgoing direction of the tunnel. Each row in
this table is indexed by rcIpMplsTunnelFrrListIndex.
In this implementation it is intended that one row
entry may used as a frr template for multiple tunnels.
Conversely a row entry may be created for each tunnel,
or there may be a combination of both styles, one to one,
and one to many in the relationship between a row
entry of this table and tunnel(s).

rcIpMplsTunnelFrrEntry row .1.3.6.1.4.1.2272.1.8.102.17.1

An entry in this table represents a tunnel frr path. An
entry is created by a network administrator for
signaled LSP with frr path set up by an MPLS signaling proto
col.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTunnelFrrListIndex Primary index into this table identifying a particular row entry of frr detour LSP contraints.	Unsigned32	.1.3.6.1.4.1.2272.1.8.102.17.1.1
rcIpMplsTunnelFrrSetupPrio Setup priority for frr detour LSP.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.17.1.2
rcIpMplsTunnelFrrHoldingPrio Holding priority for frr detour LSP.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.17.1.3
rcIpMplsTunnelFrrHopLimit Maximum number of hops a frr detour LSP is allowed to traverse.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.17.1.4
rcIpMplsTunnelFrrBandwidth Bandwidth estimate with which to set up the frr detour LSPs in units of a million bits per second (Mbps).	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.102.17.1.5
rcIpMplsTunnelFrrProtectionType Frr backup or resource protection type to be used.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.17.1.6
rcIpMplsTunnelFrrExclAnyAffinity Exclude any link in detour LSP setup which is represented by administratively defined attributes associated with the bit pattern of this object. The value represents the format of a hexadecimal 32-bit vector or mask.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.102.17.1.7
rcIpMplsTunnelFrrInclAnyAffinity Allow detour LSP setup on any link which is represented by administratively defined attributes associated with the bit pattern of this object. The value represents the format of a hexadecimal 32-bit vecto…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.102.17.1.8
rcIpMplsTunnelFrrInclAllAffinity Only allow detour LSP setup on links which contain at a minimum the administratively defined attributes represented by this bit pattern. The value represents the format of a hexadecimal 32-bit vector or mask. A value of…	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.102.17.1.9
rcIpMplsTunnelFrrLegacyFlag Flag to control the format of the frr object used. When set to true, the legacy format is used which is a class type of 7. When set to false the frr format used is for class type of 1.	SNMPv2-TCTruthValuer/w Constraints: range: 1-4094 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.17.1.10
rcIpMplsTunnelFrrRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.17.1.11

rcIpMplsTunnelHopToIpAddrMapTable

table

.1.3.6.1.4.1.2272.1.8.102.18 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsTunnelHopToIpAddrMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsTunnelHopToIpAddrMapTable'

Copy

The rcIpMplsTunnelHopToIpAddrMapTable is used to maintain
mapping between Hop name and IP Address.

rcIpMplsTunnelHopToIpAddrMapEntry row .1.3.6.1.4.1.2272.1.8.102.18.1

An entry in this table represents a mapping between
Hop name and the IP Address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsTunnelHopToIpAddrMapHopName Primary index into this table identifying a hop name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.18.1.1
rcIpMplsTunnelHopToIpAddrMapIPAddr Table column, identifying an IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.102.18.1.2
rcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLen Table column identifying IP Address prefix length.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.102.18.1.3
rcIpMplsTunnelHopToIpAddrMapRowStatus Row status.	SNMPv2-TCRowStatusr/w Constraints: range: 0-64 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.18.1.4

rcIpMplsLspTable

table

.1.3.6.1.4.1.2272.1.8.102.19 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsLspTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsLspTable'

Copy

Table of originated, terminated and transit operational LSPs
with all cross connect information

rcIpMplsLspEntry row .1.3.6.1.4.1.2272.1.8.102.19.1

An entry of rcIpMpls Lsp in Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsLspTunnelIndex Tunnel Index	Integer32	.1.3.6.1.4.1.2272.1.8.102.19.1.1
rcIpMplsLspId LSP ID	Integer32	.1.3.6.1.4.1.2272.1.8.102.19.1.2
rcIpMplsLspIngressLsrId Specifies the Ingress LSR Id	MplsLsrId Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.102.19.1.3
rcIpMplsLspEgressLsrId Specifies the Egress LSR Id	MplsLsrId	.1.3.6.1.4.1.2272.1.8.102.19.1.4
rcIpMplsLspName LSP Name	SNMPv2-TCDisplayString Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.102.19.1.5
rcIpMplsLspType This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel…	Enumeration	.1.3.6.1.4.1.2272.1.8.102.19.1.6
rcIpMplsLspDetour The tunnel is a detour tunnel or not	SNMPv2-TCTruthValue Constraints: range: 0-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.102.19.1.7
rcIpMplsLspIncomingInterface LSR-assigned ifIndex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.102.19.1.8
rcIpMplsLspIncomingLabel Incoming Label value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.102.19.1.9
rcIpMplsLspOutgoingInterface LSR-assigned ifIndex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.102.19.1.10
rcIpMplsLspOutgoingLabel Outgoing Label value	SNMPv2-SMIInteger32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.102.19.1.11

rcIpMplsIfTable

table

.1.3.6.1.4.1.2272.1.8.102.20 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMplsIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMplsIfTable'

Copy

A table used to maintain MPLS information
for a particular interface.

rcIpMplsIfEntry row .1.3.6.1.4.1.2272.1.8.102.20.1

Entry containing MPLS information. An entry is
automatically created in this table when MPLS
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMplsIfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32	.1.3.6.1.4.1.2272.1.8.102.20.1.1
rcIpMplsIfLdpAdminState Indicates whether LDP is enabled on the interface.	EnableValuer/w Constraints: range: 0-64 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.102.20.1.2
rcIpMplsIfLdpSessionKeepAlive Configures the LDP Session keep alive on the interface. The value 0 is used to indicate a global value. If 0 the interface will use the LDP global value. If greater than 0 this value will override the LDP global value.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.20.1.3
rcIpMplsIfLdpHelloHoldTime Configures the LDP hello hold time on the interface. If 0 the interface will use the LDP global value. If greater than 0 this value will override the LDP global value.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.20.1.4
rcIpMplsIfLdpTransportAddr Configures the transport address of the LDP lsp. If not set then transport address will be the MPLS router id.	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.102.20.1.5
rcIpMplsIfLdpImportPolicy Configures the LDP import policy behavior. If set to host-only then only host will import policies. If set to all then all interfaces will import policies.	Enumerationr/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.102.20.1.6
rcIpMplsIfRsvpAdminState Indicates whether RSVP is enabled on the interface.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.102.20.1.7
rcIpMplsIfRefreshReduction Indicates whether RSVP refresh reduction is enabled or not. If set to global, refresh reduction will take the global RSVP refresh reduction value.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.102.20.1.8
rcIpMplsIfRefreshInterval Configures the RSVP refresh interval on the interface. If set to zero, the refresh interval will default to the global rsvp refresh interval.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.20.1.9
rcIpMplsIfRefreshMultiplier Configures the RSVP refresh multiplier for the interface. If set to zero, the refresh interval will default to to global rsvp refresh multiplier.	secondsUnsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.102.20.1.10
rcIpMplsIfRsvpHelloInterval Configures the RSVP hello interval on the interface. If 0 the interface will use the RSVP global value. If greater than 0 this value will override the RSVP global value.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.20.1.11
rcIpMplsIfMessageBundling Indicates whether RSVP message bundling is enabled or not. If set to global, message bundling will take the global RSVP message bundling value.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.102.20.1.12
rcIpMplsIfMtu Configures the mtu of the mpls interface. The value cannot exceed that of the system mtu size.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.102.20.1.13
rcIpMplsIfRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 0-64 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.102.20.1.14
rcIpMplsIfAuthentication Used to enable/disable RSVP MD5 authentication.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.102.20.1.15
rcIpMplsIfAuthenticationKey RSVP MD5 authentication key.	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.102.20.1.16
rcIpMplsIfAdminGroupList Bitmap of admin group ids. The LSB is the lowest numbered admin group.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.102.20.1.17
rcIpMplsIfBandwidth Maximum reservable bandwidth in kbps.	SNMPv2-SMIUnsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.102.20.1.18

rcIpInterVrfStaticRouteTable

table

.1.3.6.1.4.1.2272.1.8.103.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpInterVrfStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpInterVrfStaticRouteTable'

Copy

This table is used to add static IP routes to
the device.  Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic.

rcIpInterVrfStaticRouteEntry row .1.3.6.1.4.1.2272.1.8.103.2.1

A static route to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpInterVrfStaticRouteOwnerVrfId Owner VRF id of the static route	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.103.2.1.1
rcIpInterVrfStaticRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.103.2.1.2
rcIpInterVrfStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.103.2.1.3
rcIpInterVrfStaticRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.103.2.1.4
rcIpInterVrfStaticRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	Integer32r/w	.1.3.6.1.4.1.2272.1.8.103.2.1.5
rcIpInterVrfStaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	Integer32	.1.3.6.1.4.1.2272.1.8.103.2.1.6
rcIpInterVrfStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Enumerated Values: 1 dense 2 sparse 3 sparseDense 4 ssm	.1.3.6.1.4.1.2272.1.8.103.2.1.7
rcIpInterVrfStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Constraints: range: 0-18724 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.103.2.1.8
rcIpInterVrfStaticRouteStatus Used to indicate the current status of this entry.	Enumeration Constraints: range: 1-18724	.1.3.6.1.4.1.2272.1.8.103.2.1.9
rcIpInterVrfStaticRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Enumerated Values: 1 active 2 passive Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.103.2.1.10
rcIpInterVrfStaticRouteLocalNextHop Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.103.2.1.11
rcIpInterVrfStaticRouteNextHopVrfId Used to indicate nhVrfId in inter-VRF static-route configuration	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.8.103.2.1.12

rcIpStaticMRouteTable

table

.1.3.6.1.4.1.2272.1.8.105.1.1.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpStaticMRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpStaticMRouteTable'

Copy

This table is used by multicast routing protocols, i.e
PIM-SM, PIM-SSM, MSDP and is not visible to any other L2/L3
Protocols.  It provides the flexibility of separating the
paths for unicast and multicast streams.  Any route addition
to this table will not affect the switching and/or routing of
IP unicast packets.

rcIpStaticMRouteEntry row .1.3.6.1.4.1.2272.1.8.105.1.1.1.1

A static MRoute to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpStaticMRouteIpAddressType The address type of Static MRoute IP address.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.1
rcIpStaticMRouteIpAddress Static MRoute IP address denotes the destination network for which the route is being added.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.2
rcIpStaticMRouteMask Denotes the IP subnet mask of the Static MRoute.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.3
rcIpStaticMRouteRpfAddressType The address type of Static MRoute Rpf address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.4
rcIpStaticMRouteRpfAddress RPF address is the same as the nexthop in unicast Static IP route table. The RPF address denotes the RPF neighbor towards RP/Source.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.5
rcIpStaticMRoutePreference Static MRoute Preference is the administrative distance for the given route. When unicast routing table and the multicast-static IP route table have different routes for the same destination network, then this administr…	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.6
rcIpStaticMRouteEnable This denotes the status of the route in this table. It can either be enabled/disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.7
rcIpStaticMRouteRowStatus Creation and deletion of the row entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 valid 2 invalid Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.105.1.1.1.1.8

rcIpEcmpRouteTable

table

.1.3.6.1.4.1.2272.1.8.106.1.1.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpEcmpRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpEcmpRouteTable'

Copy

This is used to get the ECMP route 
for a given pair of source IP and 
destination IP addresses.

rcIpEcmpRouteEntry row .1.3.6.1.4.1.2272.1.8.106.1.1.1.1

An entry of rcIpEcmpRouteTable.

Indexes

rcIpv6PimActiveRPGroupAddress

Column	Syntax	OID
rcIpEcmpRouteSrcIp Source IP	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.106.1.1.1.1.1
rcIpEcmpRouteDstIp Destination IP	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.106.1.1.1.1.2
rcIpEcmpRouteDstMask Destination IP mask	SNMPv2-SMIIpAddress Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.106.1.1.1.1.3
rcIpEcmpRouteNextHopLegacy Next-hop address if the ingress port is on a legacy card.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.106.1.1.1.1.4
rcIpEcmpRouteNextHopRMod Next-hop address if the ingress port is on a R-Mod card.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.106.1.1.1.1.5

rcIPClearArpRecordTable

table

.1.3.6.1.4.1.2272.1.8.107 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIPClearArpRecordTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIPClearArpRecordTable'

Copy

Table used to clear an IP ARP Record.

rcIPClearArpRecordEntry row .1.3.6.1.4.1.2272.1.8.107.1

IP Clear ARP Record Table Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIPClearArpRecordIpAddr IP Address that needs to be cleared.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.107.1.1
rcIPClearArpRecordVlanId Vlan Id where the ARP record has to be cleared.	Integer32 Constraints: range: 0-0 range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.8.107.1.2
rcIPClearArpRecordLCForceDelete By default, when LCForceDelete (Line Card Force Delete) is set to false, if the ARP record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will be …	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 4-4 range: 8-8 range: 16-16 range: 20-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.107.1.3

rcIPClearIPMCRecordTable

table

.1.3.6.1.4.1.2272.1.8.108 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIPClearIPMCRecordTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIPClearIPMCRecordTable'

Copy

Table used to clear an IP MC Record.

rcIPClearIPMCRecordEntry row .1.3.6.1.4.1.2272.1.8.108.1

IP Clear IP MC Record Table Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIPClearIPMCRecordGroup The IP Multicast Group Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.108.1.1
rcIPClearIPMCRecordVlanId Vlan Id where the IP MC record has to be cleared.	Integer32	.1.3.6.1.4.1.2272.1.8.108.1.2
rcIPClearIPMCRecordSource The Source IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.108.1.3
rcIPClearIPMCRecordLCForceDelete By default, when LCForceDelete (Line Card Force Delete) is set to false, if the IP MC record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.108.1.4

rcIpIsisInFilterNickNameTable

table

.1.3.6.1.4.1.2272.1.8.110.2.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisInFilterNickNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisInFilterNickNameTable'

Copy

IP Isis In Filter Nick Name table

rcIpIsisInFilterNickNameEntry row .1.3.6.1.4.1.2272.1.8.110.2.1.1

An entry of Ip Isis In Filter Nick Name Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisInFilterNickNameAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.8.110.2.1.1.1
rcIpIsisInFilterNickNameEnable Enables or disables the NickName entry. The value must be enabled to filter.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.1.1.2
rcIpIsisInFilterNickNamePolicyName Route Map name used	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.1.1.3
rcIpIsisInFilterNickNameRowStatus Ip Isis In Filter Nick Name Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.1.1.4
rcIpIsisInFilterNickNameBackBonePolicyName Backbone Route Map name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.1.1.5

rcIpIsisInFilterIsidTable

table

.1.3.6.1.4.1.2272.1.8.110.2.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisInFilterIsidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisInFilterIsidTable'

Copy

IP Isis In Filter Isid Isid table

rcIpIsisInFilterIsidEntry row .1.3.6.1.4.1.2272.1.8.110.2.2.1

An entry of Ip Isis In Filter Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisInFilterIsid Isid value used to filter by. The value 0 is used for Global Router.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.110.2.2.1.1
rcIpIsisInFilterIsidEnable Enables or disables the Isid entry. The value must be enabled to filter.	EnableValuer/w Enumerated Values: 1 none 2 msdp 3 static	.1.3.6.1.4.1.2272.1.8.110.2.2.1.2
rcIpIsisInFilterIsidPolicyName Route Map name used	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.2.1.3
rcIpIsisInFilterIsidRowStatus Ip Isis In Filter Isid Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.2.1.4
rcIpIsisInFilterIsidBackbonePolicyName Backbone Route Map name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.2.1.5

rcIpIsisInFilterNickNameIsidTable

table

.1.3.6.1.4.1.2272.1.8.110.2.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisInFilterNickNameIsidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisInFilterNickNameIsidTable'

Copy

IP Isis In Filter Nick Name Isid table

rcIpIsisInFilterNickNameIsidEntry row .1.3.6.1.4.1.2272.1.8.110.2.3.1

An entry of Ip Isis In Filter Nick Name Isid Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisInFilterNickNameIsidAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.110.2.3.1.1
rcIpIsisInFilterNickNameIsid Isid used to filter by. The value 0 is used for Global Router.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.110.2.3.1.2
rcIpIsisInFilterNickNameIsidEnable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.3.1.3
rcIpIsisInFilterNickNameIsidPolicyName Route Map name used	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.3.1.4
rcIpIsisInFilterNickNameIsidRowStatus Ip Isis In Filter Nick Name Isid Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.3.1.5
rcIpIsisInFilterNickNameIsidBackBonePolicyName Backbone Route Map name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.3.1.6

rcIpIsisIsidListTable

table

.1.3.6.1.4.1.2272.1.8.110.2.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisIsidListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisIsidListTable'

Copy

IP Isis Isid List table

rcIpIsisIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.4.1

An entry of Ip Isis Isid List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisIsidListName Name of Isid List	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.110.2.4.1.1
rcIpIsisIsidListIsid Is a member of the specified isid list. The value is the i-sid integer value or the value 0 is used for Global Router.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.110.2.4.1.2
rcIpIsisIsidListRowStatus Row Status	SNMPv2-TCRowStatusr/w Constraints: range: 1-4095 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.4.1.3

rcIpIsisInFilterIsidListTable

table

.1.3.6.1.4.1.2272.1.8.110.2.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisInFilterIsidListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisInFilterIsidListTable'

Copy

IP Isis In Filter Isid List table

rcIpIsisInFilterIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.5.1

An entry of Ip Isis In Filter Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisInFilterIsidListName Name of Isid List	OctetString	.1.3.6.1.4.1.2272.1.8.110.2.5.1.1
rcIpIsisInFilterIsidListEnable Enables or disables the Isid List entry. The value must be enabled to filter.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.5.1.2
rcIpIsisInFilterIsidListPolicyName Route Map name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.5.1.3
rcIpIsisInFilterIsidListRowStatus Ip Isis In Filter Isid List Table Row Status	SNMPv2-TCRowStatusr/w Constraints: range: 0-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.5.1.4
rcIpIsisInFilterIsidListBackBonePolicyName Backbone Route Map name	OctetStringr/w Enumerated Values: 1 controller 2 gateway 3 both	.1.3.6.1.4.1.2272.1.8.110.2.5.1.5

rcIpIsisInFilterNickNameIsidListTable

table

.1.3.6.1.4.1.2272.1.8.110.2.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpIsisInFilterNickNameIsidListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpIsisInFilterNickNameIsidListTable'

Copy

IP Isis In Filter Nick Name Isid List table

rcIpIsisInFilterNickNameIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.6.1

An entry of Ip Isis In Filter Nick Name Isid ListTable

Indexes

No indexes recorded

Column	Syntax	OID
rcIpIsisInFilterNickNameIsidListAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Enumerated Values: 1 other 2 local 3 netmgmt 4 dvmrp 5 mospf 6 pimSparseDense 7 cbt 8 pimSparseMode 9 pimDenseMode 10 igmpOnly 11 pimSsmMode 12 spb 13 spbpimgw Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.8.110.2.6.1.1
rcIpIsisInFilterNickNameIsidListName Name of Isid List used to filter	OctetString	.1.3.6.1.4.1.2272.1.8.110.2.6.1.2
rcIpIsisInFilterNickNameIsidListEnable Enables or disables the NickName IsidList entry. The value must be enabled to filter.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.6.1.3
rcIpIsisInFilterNickNameIsidListPolicyName Route Map name	OctetStringr/w Enumerated Values: 1 other 2 local 3 netmgmt 4 dvmrp 5 mospf 6 pimSparseDense 7 cbt 8 pimSparseMode 9 pimDenseMode 10 igmpOnly 11 pimSsmMode 12 spb 13 spbpimgw	.1.3.6.1.4.1.2272.1.8.110.2.6.1.4
rcIpIsisInFilterNickNameIsidListRowStatus Ip Isis In Filter Nick Name Isid List Table Row Status	SNMPv2-TCRowStatusr/w Constraints: range: 0-16777215 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.6.1.5
rcIpIsisInFilterNickNameIsidListBackBonePolicyName Backbone Route Map name	OctetStringr/w	.1.3.6.1.4.1.2272.1.8.110.2.6.1.6

rcIpv6PimTable

table

.1.3.6.1.4.1.2272.1.8.112.1.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PimTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PimTable'

Copy

IPv6 PIM table

rcIpv6PimEntry row .1.3.6.1.4.1.2272.1.8.112.1.2.1

An entry of IPv6 PIM Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PimIfIndex The value of ifIndex for the interface on which IPv6 PIM is set	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.112.1.2.1.1
rcIpv6PimEnable Enable/Disable PIM on interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.112.1.2.1.2
rcIpv6PimMode Set PIM interface mode to sparse or source specific	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.112.1.2.1.3
rcIpv6PimHelloInterval The frequency at which PIM Hello messages are transmitted on this interface.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.112.1.2.1.4
rcIpv6PimJoinPruneInterval The frequency at which PIM Join/Prune messages are transmitted on this PIM interface.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.8.112.1.2.1.5
rcIpv6PimIntfType PIM interface type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.112.1.2.1.7

rcIpv6PimInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.112.1.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PimInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PimInterfaceTable'

Copy

IPv6 PIM Interface table

rcIpv6PimInterfaceEntry row .1.3.6.1.4.1.2272.1.8.112.1.3.1

An entry of IPv6 PIM Interface Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PimInterfaceIfIndex The value of ifIndex for the interface on which IPv6 PIM is set	InterfaceIndex Enumerated Values: 1 pruned 2 forwarding Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.112.1.3.1.1
rcIpv6PimInterfaceOperState The current operational state of this PIM interface.	Enumeration	.1.3.6.1.4.1.2272.1.8.112.1.3.1.2
rcIpv6PimInterfaceType PIM interface type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.8.112.1.3.1.3

rcIpv6PimStaticRPTable

table

.1.3.6.1.4.1.2272.1.8.112.1.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PimStaticRPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PimStaticRPTable'

Copy

The table lists all the RPs configured statically for
various IPv6 multicast groups.

rcIpv6PimStaticRPEntry row .1.3.6.1.4.1.2272.1.8.112.1.4.1

An entry (conceptual row) in the rcIpv6PimStaticRPTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PimStaticRPGroupAddress The IPv6 multicast group address which, when combined with rcIpv6PimStaticRPGroupMask, identifies a group prefix for which rcIpv6PimStaticRPAddress is a static-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.112.1.4.1.1
rcIpv6PimStaticRPGroupMask The multicast group address mask which, when combined with rcIpv6PimStaticRPGroupAddress, identifies a group prefix for which rcIpv6PimStaticRPAddress is a static-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.112.1.4.1.2
rcIpv6PimStaticRPAddress The (unicast) address of the static-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.112.1.4.1.3
rcIpv6PimStaticRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.112.1.4.1.4
rcIpv6PimStaticRPStatus The status of StaticRP.	Enumeration Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.8.112.1.4.1.5

rcIpv6PimActiveRPTable

table

.1.3.6.1.4.1.2272.1.8.112.1.7 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PimActiveRPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PimActiveRPTable'

Copy

The table lists the RPs being used for the active IP
multicast groups.

rcIpv6PimActiveRPEntry row .1.3.6.1.4.1.2272.1.8.112.1.7.1

An entry in the rcIpv6PimActiveRPTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PimActiveRPGroupAddress The active IPv6 multicast group address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.112.1.7.1.1
rcIpv6PimActiveRPAddress The address of the RP for the active multicast group.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.112.1.7.1.2
rcIpv6PimActiveRPPriority The priority of the RP.	Unsigned32	.1.3.6.1.4.1.2272.1.8.112.1.7.1.3

rcIpSpbPimGwInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.114.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwInterfaceTable'

Copy

IP PIM Gateway table

rcIpSpbPimGwInterfaceEntry row .1.3.6.1.4.1.2272.1.8.114.2.1

An entry of Ip Pim Gateway Interface Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwInterfaceIfIndex port	InterfaceIndex Enumerated Values: 1 disable 2 enable Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.114.2.1.1
rcIpSpbPimGwInterfaceOperState The current operational state of this PIM-gw interface.	Enumeration Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.8.114.2.1.2
rcIpSpbPimGwInterfaceAddressType The address type of this PIM-gw interface.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.114.2.1.3
rcIpSpbPimGwInterfaceAddress The primary IP address of this router on this PIM-gw interface. The InetAddressType is given by the rcIpSpbPimGwInterfaceAddressType object.	OctetString	.1.3.6.1.4.1.2272.1.8.114.2.1.4
rcIpSpbPimGwInterfaceAddressMask The primary IP address mask of this router on this PIM-gw interface.	OctetString	.1.3.6.1.4.1.2272.1.8.114.2.1.5
rcIpSpbPimGwInterfaceHelloInterval PIM Hello transmission interval. This PIM Gateway VLAN level interval setting overrides the inherited Global PIM Gateway Hello Interval setting. Setting the Hello interval to 0 will cause neighbors to never expire…	Integer32r/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.8.114.2.1.6
rcIpSpbPimGwInterfaceJoinPruneInterval PIM Join/Prune transmission interval. This PIM Gateway VLAN level interval setting overrides the inherited Global level Join/Prune transmission interval setting.	Integer32r/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.8.114.2.1.7

rcIpSpbPimGwNeighborTable

table

.1.3.6.1.4.1.2272.1.8.114.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwNeighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwNeighborTable'

Copy

The PIM-gw neighbor Table

rcIpSpbPimGwNeighborEntry row .1.3.6.1.4.1.2272.1.8.114.3.1

An entry (conceptual row) in the pimNeighborTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwNeighborIfIndex The value of ifIndex for the interface used to reach this PIM-gw neighbor.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.114.3.1.1
rcIpSpbPimGwNeighborAddressType The address type of this PIM-gw neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.114.3.1.2
rcIpSpbPimGwNeighborAddress The primary IP address of this PIM-gw neighbor. The InetAddressType is given by the rcIpSpbPimGwNeighborAddressType object.	OctetString	.1.3.6.1.4.1.2272.1.8.114.3.1.3
rcIpSpbPimGwNeighborUpTime The time since this PIM-gw neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Enumerated Values: 1 disable 2 enable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.114.3.1.4
rcIpSpbPimGwNeighborExpiryTime The minimum time remaining before this PIM-gw neighbor will time out.	SNMPv2-SMITimeTicks Enumerated Values: 1 disable 2 enable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.114.3.1.5

rcIpSpbPimGwControllerForeignSrcTable

table

.1.3.6.1.4.1.2272.1.8.114.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwControllerForeignSrcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwControllerForeignSrcTable'

Copy

IP Multicast foreign source table from SPB PIM GW controller.
This is table of IP multicast sources from non-SPBM domain.

rcIpSpbPimGwControllerForeignSrcEntry row .1.3.6.1.4.1.2272.1.8.114.4.1

An entry of IP multicast foreign source.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwControllerForeignSrcSourceAddress The source IP address from non-SPBM multicast domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.1
rcIpSpbPimGwControllerForeignSrcGroupAddress Multicast group IP address associated with the foreign source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.2
rcIpSpbPimGwControllerForeignSrcRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.114.4.1.3
rcIpSpbPimGwControllerForeignSrcGatewaySysId System ID of the node selected as the gateway for this foreing source. This object has valid value if the source has a gateway assigned. If the source is not assigned a gateway, this object will have all 0s.	OctetString	.1.3.6.1.4.1.2272.1.8.114.4.1.4
rcIpSpbPimGwControllerForeignSrcGatewayHostName Host name of the node selected as the gateway for this foreign source. This object has valid value if the source has a gateway assigned. If the source is not assigned a gateway, this object will have NULL.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.8.114.4.1.5
rcIpSpbPimGwControllerForeignSrcType The type of the owner of this source.	Enumeration	.1.3.6.1.4.1.2272.1.8.114.4.1.6
rcIpSpbPimGwControllerForeignSrcOwner The IP address of the MSDP peer if the foreign source type (rcIpSpbPimGwControllerForeignSrcType) is MSDP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.7

rcIpSpbPimGwControllerSpbmcSrcTable

table

.1.3.6.1.4.1.2272.1.8.114.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwControllerSpbmcSrcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwControllerSpbmcSrcTable'

Copy

SPB Multicast source table from SPB PIM GW controller.
This is table for all SPBM sources distributed to MSDP.

rcIpSpbPimGwControllerSpbmcSrcEntry row .1.3.6.1.4.1.2272.1.8.114.5.1

An entry of SPBMC source sent to MSDP.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwControllerSpbmcSrcSourceAddress The source IP address from SPBM multicast domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.5.1.1
rcIpSpbPimGwControllerSpbmcSrcGroupAddress Multicast group IP address associated with the SPBMC source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.5.1.2
rcIpSpbPimGwControllerSpbmcSrcOriginatorSysId System ID of the node to which the source is attached to.	OctetString	.1.3.6.1.4.1.2272.1.8.114.5.1.3
rcIpSpbPimGwControllerSpbmcSrcOriginatorHostName Host name of the node to which the source is attached to.	OctetString	.1.3.6.1.4.1.2272.1.8.114.5.1.4

rcIpSpbPimGwGatewayForeignSrcTable

table

.1.3.6.1.4.1.2272.1.8.114.6 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwGatewayForeignSrcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwGatewayForeignSrcTable'

Copy

IP Multicast foreign source table from SPB PIM GW gateway.

rcIpSpbPimGwGatewayForeignSrcEntry row .1.3.6.1.4.1.2272.1.8.114.6.1

An entry of IP multicast foreign source.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwGatewayForeignSrcSourceAddress The source IP address foreign source entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.6.1.1
rcIpSpbPimGwGatewayForeignSrcGroupAddress Multicast group IP address associated with the foreign source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.6.1.2
rcIpSpbPimGwGatewayForeignSrcControllerSysId System ID of the controller node (preferred controller) that sent this foreing source.	OctetString	.1.3.6.1.4.1.2272.1.8.114.6.1.3
rcIpSpbPimGwGatewayForeignSrcControllerHostName Host name of the controller node that sent this foreign source.	OctetString	.1.3.6.1.4.1.2272.1.8.114.6.1.4
rcIpSpbPimGwGatewayForeignSrcGatewaySysId System ID of the node selected as the gateway for this foreing source.	OctetString	.1.3.6.1.4.1.2272.1.8.114.6.1.5
rcIpSpbPimGwGatewayForeignSrcGatewayHostName Host name of the node selected as the gateway for this foreign source.	OctetString	.1.3.6.1.4.1.2272.1.8.114.6.1.6
rcIpSpbPimGwGatewayForeignSrcInVid The VLAN id of the PimGw interface through which the source of this source is reachable.	Integer32	.1.3.6.1.4.1.2272.1.8.114.6.1.7
rcIpSpbPimGwGatewayForeignSrcInPort An unique value to identify a physical interface through which the source of this source is reachable.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.114.6.1.8
rcIpSpbPimGwGatewayForeignSrcOwnerType msdp - if the owner is MSDP; static - otherwise	Enumeration	.1.3.6.1.4.1.2272.1.8.114.6.1.9

rcIpSpbPimGwNodeTable

table

.1.3.6.1.4.1.2272.1.8.114.7 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpSpbPimGwNodeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpSpbPimGwNodeTable'

Copy

The PIM-gw node Table

rcIpSpbPimGwNodeEntry row .1.3.6.1.4.1.2272.1.8.114.7.1

An entry (conceptual row) in the pimNodeTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpSpbPimGwNodeMacAddress The Max Address of the active node.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.114.7.1.1
rcIpSpbPimGwNodeHostName The Host name of the active node.	OctetString	.1.3.6.1.4.1.2272.1.8.114.7.1.2
rcIpSpbPimGwNodeRoleType The role type of the node. It is either Gateway, Controller or both.	Enumeration	.1.3.6.1.4.1.2272.1.8.114.7.1.3

rcMRouteExtTable

table

.1.3.6.1.4.1.2272.1.8.115.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteExtTable'

Copy

The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router.

rcMRouteExtEntry row .1.3.6.1.4.1.2272.1.8.115.1.1

An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtProtocol The routing mechanism via which this route was learned.	Enumeration	.1.3.6.1.4.1.2272.1.8.115.1.1.1

rcMRouteExtNextHopTable

table

.1.3.6.1.4.1.2272.1.8.115.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteExtNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteExtNextHopTable'

Copy

The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams.  Each entry is one of a list of next hops on
outgoing interfaces for particular sources sending to a
particular multicast group address.

rcMRouteExtNextHopEntry row .1.3.6.1.4.1.2272.1.8.115.2.1

An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtNextHopProtocol The routing mechanism via which this next-hop was learned.	Enumeration	.1.3.6.1.4.1.2272.1.8.115.2.1.1
rcMRouteExtNextHopL2Isid L2 ISID of the cvlan.	Integer32	.1.3.6.1.4.1.2272.1.8.115.2.1.2

rcMRouteExtInterfaceTable

table

.1.3.6.1.4.1.2272.1.8.115.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteExtInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteExtInterfaceTable'

Copy

The (conceptual) table containg multicast routing
information specific to interfaces.

rcMRouteExtInterfaceEntry row .1.3.6.1.4.1.2272.1.8.115.3.1

An entry (conceptual row) containing the multicast routing
information for a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtInterfaceProtocol The routing protocol running on this interface.	Enumeration	.1.3.6.1.4.1.2272.1.8.115.3.1.1

rcMRouteExtNextHopPortTable

table

.1.3.6.1.4.1.2272.1.8.115.4 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteExtNextHopPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteExtNextHopPortTable'

Copy

The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams.  Each entry is one of a list of next hops on
outgoing interfaces for particular sources sending to a
particular multicast group address

rcMRouteExtNextHopPortEntry row .1.3.6.1.4.1.2272.1.8.115.4.1

An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtNextHopPortGroup The IP multicast group for which this entry specifies a next hop on an outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.115.4.1.1
rcMRouteExtNextHopPortSource The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.115.4.1.2
rcMRouteExtNextHopPortSourceMask The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.115.4.1.3
rcMRouteExtNextHopPortIfIndex The ifIndex value of the interface for the outgoing interface for this next hop.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.115.4.1.4
rcMRouteExtNextHopPortReceiverPort The port number where the receiver exists for this next hop.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.8.115.4.1.5
rcMRouteExtNextHopPortAddress The address of the next hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple next hop addresses out a single outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.115.4.1.6
rcMRouteExtNextHopPortState An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' in…	Enumeration	.1.3.6.1.4.1.2272.1.8.115.4.1.7
rcMRouteExtNextHopPortUpTime The time since the multicast routing information represented by this entry was learned by the router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.115.4.1.8
rcMRouteExtNextHopPortExpiryTime The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.115.4.1.9
rcMRouteExtNextHopPortClosestMemberHops The minimum number of hops between this router and any member of this IP multicast group reached via this next hop on this outgoing interface. Any IP multicast datagrams for the group which have a TTL less than this nu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.115.4.1.10
rcMRouteExtNextHopPortProtocol The routing mechanism via which this next-hop was learned.	Enumeration	.1.3.6.1.4.1.2272.1.8.115.4.1.11
rcMRouteExtNextHopPortPkts The number of packets which have been forwarded using this route.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.115.4.1.12

rcArpExtTable

table

.1.3.6.1.4.1.2272.1.9.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcArpExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcArpExtTable'

Copy

ARP extension table.  This table augments the
standard ipNetToMediaTable defined in RFC1213.

rcArpExtEntry row .1.3.6.1.4.1.2272.1.9.2.1

Entry containing Proprietary ARP information.
An entry is automatically created in this table
when an ip address is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcArpExtEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.9.2.1.1
rcArpExtEntDoProxy Enable or disable ARP proxy responses on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.9.2.1.2
rcArpExtEntDoResp Enable or disable the sending of ARP responses on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.9.2.1.3
rcArpExtEntDoFlood Enable or disable flooding of ARP responses for NLBS Virtual Mac on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.9.2.1.4
rcArpExtEntForcedRearp Enable or disable the activity check on ARP entries with respect to aging on the specified interface. When enabled and the timer expires, the ARP entry is removed from the active list and placed in the list for re-a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.9.2.1.5

rcArpExtV2Table

table obsolete

.1.3.6.1.4.1.2272.1.9.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcArpExtV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcArpExtV2Table'

Copy

ARP extension table.  This table augments the
standard ipNetToMediaTable defined in RFC1213.

rcArpExtV2Entry row .1.3.6.1.4.1.2272.1.9.3.1

Entry containing Proprietary ARP information.
An entry is automatically created in this table
when an ip address is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcArpExtV2EntIfIndexobsolete The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.9.3.1.1
rcArpExtV2EntIpIfAddrobsolete Ip Address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.9.3.1.2
rcArpExtV2EntDoProxyobsolete Enable or disable ARP proxy responses on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.9.3.1.3
rcArpExtV2EntDoRespobsolete Enable or disable the sending of ARP responses on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.9.3.1.4

rcRipExtTable

table

.1.3.6.1.4.1.2272.1.10.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRipExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRipExtTable'

Copy

RIP extension table.  This table augments the
standard IfConfTable table in RFC1389.

rcRipExtEntry row .1.3.6.1.4.1.2272.1.10.3.1

Entry containing Proprietary RIP information.
An entry is automatically created in this table
when an ip address is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcRipExtEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.10.3.1.1
rcRipExtEntTalk Enable or disable RIP transmission on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.3.1.2
rcRipExtEntListen Enable or disable RIP reception on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.3.1.3
rcRipExtEntPoison Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.3.1.4

rcRipExtV2Table

table obsolete

.1.3.6.1.4.1.2272.1.10.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRipExtV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRipExtV2Table'

Copy

RIP extension table.  This table augments the
standard IfConfTable table in RFC1389.

rcRipExtV2Entry row .1.3.6.1.4.1.2272.1.10.4.1

Entry containing Proprietary RIP information.
An entry is automatically created in this table
when an ip address is configured on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcRipExtV2EntIfIndexobsolete The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.10.4.1.1
rcRipExtV2EntIpIfAddrobsolete Ip Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.10.4.1.2
rcRipExtV2EntTalkobsolete Enable or disable RIP transmission on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.4.1.3
rcRipExtV2EntListenobsolete Enable or disable RIP reception on the specified interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.4.1.4
rcRipExtV2EntPoisonobsolete Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled.	Enumerationr/w	.1.3.6.1.4.1.2272.1.10.4.1.5

rcIpv6RipngInterfaceTable

table

.1.3.6.1.4.1.2272.1.10.5.1.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RipngInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RipngInterfaceTable'

Copy

IPv6 Ripng Interface table

rcIpv6RipngInterfaceEntry row .1.3.6.1.4.1.2272.1.10.5.1.2.1

An entry of IPv6 Ripng Interface Table.

Indexes

rcStatOspfIfIndex

Column	Syntax	OID
rcIpv6RipngInterfaceIfIndex Ripng Interface Index.	InterfaceIndex Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.10.5.1.2.1.1
rcIpv6RipngInterfaceRipAdminStatus Enable/Disable RIPng on interface	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.2
rcIpv6RipngInterfaceDefaultInfoState Origante default route under the particular interface	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.3
rcIpv6RipngInterfaceCost Used to specify the cost of RIPng metric	Integer32r/w	.1.3.6.1.4.1.2272.1.10.5.1.2.1.4
rcIpv6RipngInterfacePoison Enable/Disable poison reverse on Ripng interface	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.5
rcIpv6RipngInterfaceRipOperStatus Enable/Disable RIPng Operational state on interface	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.6
rcIpv6RipngInterfaceRowStatus This variable controls the status of the en- try.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.10.5.1.2.1.7

rcIpv6RipngIfStatsTable

table

.1.3.6.1.4.1.2272.1.10.5.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RipngIfStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RipngIfStatsTable'

Copy

A  list  of  subnets  which  require  separate
status monitoring in RIPng.

rcIpv6RipngIfStatsEntry row .1.3.6.1.4.1.2272.1.10.5.1.3.1

A Single Routing Domain in a single Subnet.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RipngIfStatsIfIndex The interface index of the RIPng interface.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.10.5.1.3.1.1
rcIpv6RipngIfStatsRcvBadPackets The number of RIPng response packets received by the RIPng process which were subsequently dis- carded for any reason (e.g. a version 0 packet, or an unknown command type).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.2
rcIpv6RipngIfStatsRcvBadRoutes The number of routes, in valid RIPng packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.3
rcIpv6RipngIfStatsSentUpdates The number of triggered RIPng updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.4
rcIpv6RipngIfStatsRcvUpdates The number of triggered RIPng updates actually receive on this interface. This explicitly does NOT include full updates received containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.5
rcIpv6RipngIfStatsClearStats Clear stats for RIpng interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.10.5.1.3.1.6

rcTestExtTable

table

.1.3.6.1.4.1.2272.1.11.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTestExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTestExtTable'

Copy

Test extension table.  This table augments the
standard ifTestTable table in RFC1573.

rcTestEntry row .1.3.6.1.4.1.2272.1.11.1.1

Proprietary test variables.

Indexes

No indexes recorded

Column	Syntax	OID
rcTestExtIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.11.1.1.1
rcTestExtPassCount The number of iterations of the test case that completed successfully.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.11.1.1.2
rcTestExtFailCount The number of iterations of the test case that failed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.11.1.1.3

rcStatTable

table

.1.3.6.1.4.1.2272.1.12.1 · 1 row entry · 33 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatTable'

Copy

A table used to store port statistics.

rcStatEntry row .1.3.6.1.4.1.2272.1.12.1.1

interface counters

Indexes

No indexes recorded

Column	Syntax	OID
rcStatPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.12.1.1.1
rcStatFrameTooShorts The total number of frames that are too short that were encountered on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.2
rcStatBridgeInUnicastFrames The total number of incoming unicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.3
rcStatBridgeInMulticastFrames The total number of incoming multicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.4
rcStatBridgeInBroadcastFrames The total number of incoming broadcast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.5
rcStatBridgeInDiscards The total number of frames that were discarded by the bridging entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.6
rcStatBridgeOutUnicastFrames The total number of outgoing unicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.7
rcStatBridgeOutMulticastFrames The total number of outgoing multicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.8
rcStatBridgeOutBroadcastFrames The total number of outgoing broadcast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.9
rcStatRouteInUnicastFrames The total number of incoming unicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.10
rcStatRouteInMulticastFrames The total number of incoming multicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.11
rcStatRouteInDiscards The total number of frames that were discarded by the routing entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.12
rcStatRouteOutUnicastFrames The total number of outgoing unicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.13
rcStatRouteOutMulticastFrames The total number of outgoing multicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.14
rcStatStgForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.15
rcStatStgInConfigBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.16
rcStatStgInTcnBpdus	SNMPv2-SMICounter32 Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.12.1.1.17
rcStatStgInBadBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.18
rcStatStgOutConfigBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.19
rcStatStgOutTcnBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.20
rcStatBridgeOutFrames Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.1.1.21
rcStatPbtUnknownDropCount Count of PBT packets dropped due to unknown destination MAC	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.22
rcStatCtrlPktRtLimitTotalCnt Total count of control packets that is passed for rate limiting	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.23
rcStatCtrlPktRtLimitDropCnt Count of control packets dropped after rate limiting	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.24
rcStatPolicerTotalBytes The total number of bytes received on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.25
rcStatPolicerTotalPkts The total number of packets received on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.26
rcStatPolicerGreenBytes The total number of bytes received on the interface that were below the committed rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.27
rcStatPolicerYellowBytes The total number of bytes received on the interface that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.28
rcStatPolicerRedBytes The total number of bytes received on the interface that were above the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.29
rcStatRateLimitDropPktRate The total number of packets dropped per second on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.30
rcStatRateLimitDropByteRate The total number of bytes dropped per second on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.31
rcStatRateLimitDropTotalBytes The total number of bytes dropped on the interface.	SNMPv2-SMICounter64 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.12.1.1.32
rcStatRateLimitDropTotalPkts The total number of packets dropped on the interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.1.1.33

rcStatGigTable

table

.1.3.6.1.4.1.2272.1.12.2 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatGigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatGigTable'

Copy

A table used to store Gigport error statistics.

rcStatGigEntry row .1.3.6.1.4.1.2272.1.12.2.1

Gigabit interface error counters

Indexes

No indexes recorded

Column	Syntax	OID
rcStatGigPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.12.2.1.1
rcStatGigLinkFailures The total number of link failures encountered on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.2
rcStatGigPacketErrors The total number of packet errors encountered on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.3
rcStatGigCarrierErrors The total number of carrier errors encountered on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.4
rcStatGigLinkInactiveErrors The total number of link inactive errors encountered on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.5
rcStatGigInFlowCtrlPktsdeprecated The total number of flow control packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.6
rcStatGigOutFlowCtrlPktsdeprecated The total number of flow control packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.2.1.7
rcStatGigHCInPfcPkts The total number of Priority Flow Control (PFC) packets received by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.8
rcStatGigHCOutPfcPkts The total number of Priority Flow Control (PFC) packets transmitted by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.9
rcStatGigHCInFlowCtrlPkts The total number of flow control packets received by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.10
rcStatGigHCOutFlowCtrlPkts The total number of flow control packets transmitted by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.11
rcStatGigFramesBad The total number of bad frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.12
rcStatGigFragmentErrors The total number of fragment errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.13
rcStatGigLongJabberErrors The total number of long jabber errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.14
rcStatGigDefaultDrops The total number of default drops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.15
rcStatGigIllegalLenError The total number of illegal length error	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.16
rcStatGigMismatchError The total number of mismatch error	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.12.2.1.17
rcStatGigOutOfRangeError The total number of out of range error	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.18
rcStatGigOversize The total number of oversize	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.19
rcStatGigDataErrors The total number of data errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.20
rcStatGigJabberErrors The total number of jabbber errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.2.1.21

rcStatOspfIfTable

table

.1.3.6.1.4.1.2272.1.12.5 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatOspfIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatOspfIfTable'

Copy

A table used to store OSPF interface
statistics.

rcStatOspfIfEntry row .1.3.6.1.4.1.2272.1.12.5.1

Ospf interface statistics

Indexes

rcMltId rcStatMltUtilPortIfIndex rcStatMltUtilTrafficType

Column	Syntax	OID
rcStatOspfIfIndex An unique value that is used to identify a physical interface.	Integer32	.1.3.6.1.4.1.2272.1.12.5.1.1
rcStatOspfIfRxHellos Used to indicate the number hello packets received by this interface.	SNMPv2-SMICounter32 Enumerated Values: 1 rx 2 tx 3 rxTx Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.2
rcStatOspfIfRxDBDescrs Used to indicate the number database descriptor packets received by this interface.	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.5.1.3
rcStatOspfIfRxLSUpdates Used to indicate the number Link state update packets received by this interface.	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.5.1.4
rcStatOspfIfRxLSReqs Used to indicate the number Link state request packets received by this interface.	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.5.1.5
rcStatOspfIfRxLSAcks Used to indicate the number Link state acknowlege packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.6
rcStatOspfIfTxHellos Used to indicate the number hello packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.7
rcStatOspfIfTxDBDescrs Used to indicate the number database descriptor packets transmitted by this interface.	SNMPv2-SMICounter32 Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.12.5.1.8
rcStatOspfIfTxLSUpdates Used to indicate the number Link state update packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.9
rcStatOspfIfTxLSReqs Used to indicate the number Link state request packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.10
rcStatOspfIfTxLSAcks Used to indicate the number Link state acknowlege packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.11
rcStatOspfIfVersionMismatches Used to indicate the number version mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.12
rcStatOspfIfAreaMismatches Used to indicate the number area mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.13
rcStatOspfIfAuthTypeMismatches Used to indicate the number AuthType mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.14
rcStatOspfIfAuthFailures Used to indicate the number Authentication failures.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.15
rcStatOspfIfNetMaskMismatches Used to indicate the number net mask mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.16
rcStatOspfIfHelloIntervalMismatches Used to indicate the number hello interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.17
rcStatOspfIfDeadIntervalMismatches Used to indicate the number dead interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.18
rcStatOspfIfOptionMismatches Used to indicate the number options mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.19

rcStatMltIfExtnTable

table

.1.3.6.1.4.1.2272.1.12.6.1 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatMltIfExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatMltIfExtnTable'

Copy

A table used to store Mlt interface
statistics.

rcStatMltIfExtnEntry row .1.3.6.1.4.1.2272.1.12.6.1.1

Mlt interface statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatMltIfExtnMltId Mlt Id	Integer32	.1.3.6.1.4.1.2272.1.12.6.1.1.1
rcStatMltIfExtnIfInMulticastPkts multi-pkts to upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.2
rcStatMltIfExtnIfInBroadcastPkts broad-pkts to upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.3
rcStatMltIfExtnIfOutMulticastPkts multi-pkts from upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.4
rcStatMltIfExtnIfOutBroadcastPkts broad-pkts from upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.5
rcStatMltIfExtnIfHCInOctets The total number of octets received on the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.6
rcStatMltIfExtnIfHCInUcastPkts The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.7
rcStatMltIfExtnIfHCInMulticastPkt The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.8
rcStatMltIfExtnIfHCInBroadcastPkt The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.9
rcStatMltIfExtnIfHCOutOctets The total number of octets transmitted out of the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.10
rcStatMltIfExtnIfHCOutUcastPkts The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.11
rcStatMltIfExtnIfHCOutMulticast The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.12
rcStatMltIfExtnIfHCOutBroadcast The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.13
rcStatMltIfExtnIfHCInLsmPkts The total number of Link State Messaging (LSM) packets delivered to this MLT.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.14
rcStatMltIfExtnIfHCOutLsmPkts The total number of Link State Messaging (LSM) packets trasmitted on this MLT.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.15

rcStatMltEtherTable

table

.1.3.6.1.4.1.2272.1.12.6.2 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatMltEtherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatMltEtherTable'

Copy

A table used to store Mlt Ethernet
statistics.

rcStatMltEtherEntry row .1.3.6.1.4.1.2272.1.12.6.2.1

Mlt enternet statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatMltEtherMltId A value that uniquely identifies the Multi-Link Trunk associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.12.6.2.1.1
rcStatMltEtherAlignmentErrors A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentErr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.2
rcStatMltEtherFCSErrors A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.3
rcStatMltEtherSingleCollFrames A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the correspondi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.4
rcStatMltEtherMultipleCollFrames A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the correspond…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.5
rcStatMltEtherSQETestError A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.6
rcStatMltEtherDeferredTransmiss A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.7
rcStatMltEtherLateCollisions The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.8
rcStatMltEtherExcessiveCollis A count of frames for which transmission on a particular MLT fails due to excessive collisions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.9
rcStatMltEtherIMacTransmitError A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding inst…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.10
rcStatMltEtherCarrierSenseError The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most onc…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.11
rcStatMltEtherFrameTooLong A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.12
rcStatMltEtherIMacReceiveError A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.13

rcStatMltIpTable

table obsolete

.1.3.6.1.4.1.2272.1.12.6.3 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatMltIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatMltIpTable'

Copy

A table used to store Mlt Ip statistics.

rcStatMltIpEntry row .1.3.6.1.4.1.2272.1.12.6.3.1

Mlt enternet statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatMltIpMltIdobsolete Mlt Id	Integer32	.1.3.6.1.4.1.2272.1.12.6.3.1.1
rcStatMltIpInReceivesobsolete all incoming packets	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.2
rcStatMltIpInHdrErrorsobsolete hdr errors detected	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.3
rcStatMltIpInAddrErrorsobsolete bad dest. ip addr	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.4
rcStatMltIpForwDatagramsobsolete packets forwarded	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.5
rcStatMltIpInUnknownProtosobsolete unsupported protocol	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.6
rcStatMltIpInDiscardsobsolete good, but no buffer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.7
rcStatMltIpInDeliversobsolete pkts delivered to upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.8
rcStatMltIpOutRequestobsolete pkts received from upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.9
rcStatMltIpOutDiscardsobsolete good, but no buffer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.10
rcStatMltIpOutNoRoutesobsolete no route to destination	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.11
rcStatMltIpReasmReqdsobsolete fragments to reassem	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.12
rcStatMltIpReasmOKsobsolete reassembled successfully	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.13
rcStatMltIpReasmFailsobsolete reassembly failures	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.14
rcStatMltIpFragOKsobsolete fragment successfully	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.15
rcStatMltIpFragFailsobsolete fragment failure	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.16
rcStatMltIpFragCreatesobsolete pkts due to fragmenting	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.17
rcStatMltIpRoutingDiscardsobsolete Route entries removed	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.3.1.18

rcStatMltIfUtilTable

table

.1.3.6.1.4.1.2272.1.12.6.30 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatMltIfUtilTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatMltIfUtilTable'

Copy

A table used to store Mlt interface utilization.

rcStatMltIfUtilEntry row .1.3.6.1.4.1.2272.1.12.6.30.1

Mlt interface utilization

Indexes

No indexes recorded

Column	Syntax	OID
rcStatMltIfUtilMltId To assign an Id within the range specified to the Mlt created	Integer32	.1.3.6.1.4.1.2272.1.12.6.30.1.1
rcStatMltIfUtilIfHCInOctets The total number of octets received on the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.30.1.2
rcStatMltIfUtilIfHCInUtil The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.30.1.3
rcStatMltIfUtilIfHCOutOctets The total number of octets transmitted out of the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.30.1.4
rcStatMltIfUtilIfHCOutUtil The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.30.1.5

rcStatMltUtilTable

table

.1.3.6.1.4.1.2272.1.12.6.33 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatMltUtilTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatMltUtilTable'

Copy

A table used to store statistics for MLT members utilization.

rcStatMltUtilEntry row .1.3.6.1.4.1.2272.1.12.6.33.1

An entry for MLT members utilization statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
rcStatMltUtilPortIfIndex Port ifIndex, member of rcMltId.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.12.6.33.1.1
rcStatMltUtilTrafficType Type of traffic for one MLT port interface.	Enumeration	.1.3.6.1.4.1.2272.1.12.6.33.1.2
rcStatMltUtilTrafficLast5Min This object returns the percentage of traffic on one MLT port interface for the last 5 minutes.	Unsigned32	.1.3.6.1.4.1.2272.1.12.6.33.1.3
rcStatMltUtilTrafficLast30Min This object returns the percentage of traffic on one MLT port interface for the last 30 minutes.	Unsigned32	.1.3.6.1.4.1.2272.1.12.6.33.1.4
rcStatMltUtilTrafficLast1Hour This object returns the percentage of traffic on one MLT port interface for the last hour.	Unsigned32	.1.3.6.1.4.1.2272.1.12.6.33.1.5

rcStatOspfIfV2Table

table obsolete

.1.3.6.1.4.1.2272.1.12.7 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatOspfIfV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatOspfIfV2Table'

Copy

A table used to store OSPF interface
statistics.

rcStatOspfIfV2Entry row .1.3.6.1.4.1.2272.1.12.7.1

Ospf interface statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatOspfIfV2Indexobsolete An unique value that is used to identify a physical interface.	Integer32	.1.3.6.1.4.1.2272.1.12.7.1.1
rcStatOspfIfV2Addrobsolete Ip Address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.12.7.1.2
rcStatOspfIfV2RxHellosobsolete Used to indicate the number hello packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.3
rcStatOspfIfV2RxDBDescrsobsolete Used to indicate the number database descriptor packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.4
rcStatOspfIfV2RxLSUpdatesobsolete Used to indicate the number Link state update packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.5
rcStatOspfIfV2RxLSReqsobsolete Used to indicate the number Link state request packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.6
rcStatOspfIfV2RxLSAcksobsolete Used to indicate the number Link state acknowlege packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.7
rcStatOspfIfV2TxHellosobsolete Used to indicate the number hello packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.8
rcStatOspfIfV2TxDBDescrsobsolete Used to indicate the number database descriptor packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.9
rcStatOspfIfV2TxLSUpdatesobsolete Used to indicate the number Link state update packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.10
rcStatOspfIfV2TxLSReqsobsolete Used to indicate the number Link state request packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.11
rcStatOspfIfV2TxLSAcksobsolete Used to indicate the number Link state acknowlege packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.12
rcStatOspfIfV2VersionMismatchesobsolete Used to indicate the number version mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.13
rcStatOspfIfV2AreaMismatchesobsolete Used to indicate the number area mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.14
rcStatOspfIfV2AuthTypeMismatchesobsolete Used to indicate the number AuthType mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.15
rcStatOspfIfV2AuthFailuresobsolete Used to indicate the number Authentication failures.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.16
rcStatOspfIfV2NetMaskMismatchesobsolete Used to indicate the number net mask mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.17
rcStatOspfIfV2HelloIntervalMismatchesobsolete Used to indicate the number hello interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.18
rcStatOspfIfV2DeadIntervalMismatchesobsolete Used to indicate the number dead interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.19
rcStatOspfIfV2OptionMismatchesobsolete Used to indicate the number options mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.7.1.20

rcStatPosControlTable

table

.1.3.6.1.4.1.2272.1.12.8.1 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatPosControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatPosControlTable'

Copy

rcStatPosControlEntry row .1.3.6.1.4.1.2272.1.12.8.1.1

Indexes

No indexes recorded

Column	Syntax	OID
rcStatPosControlPortIndex A unique value for each port.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.12.8.1.1.1
rcStatPosControlInErrors The total number of error pkts received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.8.1.1.2
rcStatPosControlInUnknownProtos The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.8.1.1.3
rcStatPosControlOutErrors The number of outbound packets that could not be transmitted because of errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.8.1.1.4
rcStatPosControlHCInOctets The total number of octets received of the interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.5
rcStatPosControlHCInUcastPkts The number of subnetwork-unicast packets received from a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.6
rcStatPosControlHCInMulticastPkts The number of multicast packets received from a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.7
rcStatPosControlHCInBroadcastPkts The number of broadcast packets received from a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.8
rcStatPosControlHCInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.9
rcStatPosControlHCOutOctets The total number of octets trasmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.10
rcStatPosControlHCOutUcastPkts The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.11
rcStatPosControlHCOutMulticastPkts The number of multicast packets delivered to a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.12
rcStatPosControlHCOutBroadcastPkts The number of broadcast packets delivered to a higher-layer protocol.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.13
rcStatPosControlHCOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.8.1.1.14

rcStatBgpPeerTable

table

.1.3.6.1.4.1.2272.1.12.11 · 1 row entry · 86 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatBgpPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatBgpPeerTable'

Copy

A table used to store Bgp Peer statistics.

rcStatBgpPeerEntry row .1.3.6.1.4.1.2272.1.12.11.1

Bgp Peer statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatBgpPeerAddr	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.12.11.1.1
rcStatBgpPeerStarts Number of times peer BGP connection started	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.2
rcStatBgpPeerStops Number of times peer BGP connection stopped	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.3
rcStatBgpPeerOpens Number of times peer opens TCP	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.4
rcStatBgpPeerCloses Number of times peer closes TCP	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.5
rcStatBgpPeerFails Number of times peer TCP attempts failed	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.6
rcStatBgpPeerFatals Number of times peer TCP crashes due to fatal error	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.7
rcStatBgpPeerConnExps Number of times peer TCP retry timer expired	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.8
rcStatBgpPeerHoldExps Number of times peer hold timer expired	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.9
rcStatBgpPeerKeepExps Number of times peer keepalive timer expired	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.10
rcStatBgpPeerTxMsgs Total messages send by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.11
rcStatBgpPeerTxOpens Opens sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.12
rcStatBgpPeerTxKeeps Keepalives sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.13
rcStatBgpPeerTxUpdates Updates sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.14
rcStatBgpPeerTxNotifys Notifications sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.15
rcStatBgpPeerRxMsgs Total messages received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.16
rcStatBgpPeerRxInCompPkts Incomplete message received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.17
rcStatBgpPeerRxOpens Opens received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.18
rcStatBgpPeerRxKeeps Keepalives received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.19
rcStatBgpPeerRxUpdates Updates received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.20
rcStatBgpPeerRxNotifys Notifications received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.21
rcStatBgpPeerBadEvents Number of invalid events received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.22
rcStatBgpPeerSyncFails Number of times FDB sync failed of the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.23
rcStatBgpPeerRcvdTooShort Number of messages recieved by the peer that is too sho rt	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.24
rcStatBgpPeerNoMarker Number of messages without marker recieved by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.25
rcStatBgpPeerDropped Number of messages the peer has dropped	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.26
rcStatBgpPeerBadMsgTypes Number of messages with invalid message type	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.27
rcStatBgpPeerTrEvent Peer trace event	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.28
rcStatBgpPeerTxRoutes Number of NLRI sent by peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.29
rcStatBgpPeerRxRoutesAdded Number of routes added into loc_rib by this peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.30
rcStatBgpPeerRxRoutesReplaced Number of routes replaced by the routes received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.31
rcStatBgpPeerRxNlri Number of NLRI received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.32
rcStatBgpPeerRxValidUpdates Number of valid UPDATEs received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.33
rcStatBgpPeerRxECodeHeader Total errors peer received: Header	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.34
rcStatBgpPeerRxECodeOpen Total errors peer received: Open	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.35
rcStatBgpPeerRxECodeUpdate Total errors peer received: Update	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.36
rcStatBgpPeerRxECodeHoldtimer Total errors peer received: Hold	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.37
rcStatBgpPeerRxECodeFSM Total errors peer received: Fsm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.38
rcStatBgpPeerRxECodeCease Total errors peer received: Cease	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.39
rcStatBgpPeerRxHdrCodeNoSync Header errors peer received: Not Synchronized	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.40
rcStatBgpPeerRxHdrCodeInvalidMsgLen Header errors peer received: Invalid message length	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.41
rcStatBgpPeerRxHdrCodeInvalidMsgType Header errors peer received: Invalid message type	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.42
rcStatBgpPeerRxOpCodeBadVer Open errors peer received: Bad Version	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.43
rcStatBgpPeerRxOpCodeBadAs Open errors peer received: Bad AS number	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.44
rcStatBgpPeerRxOpCodeBadRtID Open errors peer received: Bad BGP ID	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.45
rcStatBgpPeerRxOpCodeUnsuppOption Open errors peer received: Unsupported Options	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.46
rcStatBgpPeerRxOpCodeAuthFail Open errors peer received: Authorization failures	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.47
rcStatBgpPeerRxOpCodeBadHold Open errors peer received: Bad Hold value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.48
rcStatBgpPeerRxUpdCodeMalformedAttrList Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.49
rcStatBgpPeerRxUpdCodeWelknownAttrUnrecog Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.50
rcStatBgpPeerRxUpdCodeWelknownAttrMiss Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.51
rcStatBgpPeerRxUpdCodeAttrFlagError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.52
rcStatBgpPeerRxUpdCodeAttrLenError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.53
rcStatBgpPeerRxUpdCodeBadORIGINAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.54
rcStatBgpPeerRxUpdCodeASRoutingLoop Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.55
rcStatBgpPeerRxUpdCodeBadNHAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.56
rcStatBgpPeerRxUpdCodeOptionalAttrError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.57
rcStatBgpPeerRxUpdCodeBadNetworkField Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.58
rcStatBgpPeerRxUpdCodeMalformedASPath Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.59
rcStatBgpPeerTxECodeHeader Total errors peer received: Header	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.60
rcStatBgpPeerTxECodeOpen Total errors peer received: Open	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.61
rcStatBgpPeerTxECodeUpdate Total errors peer received: Update	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.62
rcStatBgpPeerTxECodeHoldtimer Total errors peer received: Hold	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.63
rcStatBgpPeerTxECodeFSM Total errors peer received: Fsm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.64
rcStatBgpPeerTxECodeCease Total errors peer received: Cease	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.65
rcStatBgpPeerTxHdrCodeNoSync Header errors peer received: Not Synchronized	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.66
rcStatBgpPeerTxHdrCodeInvalidMsgLen Header errors peer received: Invalid message length	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.67
rcStatBgpPeerTxHdrCodeInvalidMsgType Header errors peer received: Invalid message type	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.68
rcStatBgpPeerTxOpCodeBadVer Open errors peer received: Bad Version	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.69
rcStatBgpPeerTxOpCodeBadAs Open errors peer received: Bad AS number	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.70
rcStatBgpPeerTxOpCodeBadRtID Open errors peer received: Bad BGP ID	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.71
rcStatBgpPeerTxOpCodeUnsuppOption Open errors peer received: Unsupported Options	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.72
rcStatBgpPeerTxOpCodeAuthFail Open errors peer received: Authorization failures	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.73
rcStatBgpPeerTxOpCodeBadHold Open errors peer received: Bad Hold value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.74
rcStatBgpPeerTxUpdCodeMalformedAttrList Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.75
rcStatBgpPeerTxUpdCodeWelknownAttrUnrecog Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.76
rcStatBgpPeerTxUpdCodeWelknownAttrMiss Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.77
rcStatBgpPeerTxUpdCodeAttrFlagError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.78
rcStatBgpPeerTxUpdCodeAttrLenError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.79
rcStatBgpPeerTxUpdCodeBadORIGINAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.80
rcStatBgpPeerTxUpdCodeASRoutingLoop Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.81
rcStatBgpPeerTxUpdCodeBadNHAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.82
rcStatBgpPeerTxUpdCodeOptionalAttrError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.83
rcStatBgpPeerTxUpdCodeBadNetworkField Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.84
rcStatBgpPeerTxUpdCodeMalformedASPath Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.11.1.85
rcStatBgpPeerReset reset peer stats	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.12.11.1.86

rcStatBgpPeerAfTable

table

.1.3.6.1.4.1.2272.1.12.13 · 1 row entry · 87 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStatBgpPeerAfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStatBgpPeerAfTable'

Copy

A table used to store v4/v6 Bgp Peer statistics.

rcStatBgpPeerAfEntry row .1.3.6.1.4.1.2272.1.12.13.1

AF independent Bgp Peer statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcStatBgpPeerAfAddrType Inet address type of the AF independent peer	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.12.13.1.1
rcStatBgpPeerAfAddr Inet address of the AF independent peer	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.12.13.1.2
rcStatBgpPeerAfStarts Number of times peer BGP connection started	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.3
rcStatBgpPeerAfStops Number of times peer BGP connection stopped	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.4
rcStatBgpPeerAfOpens Number of times peer opens TCP	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.5
rcStatBgpPeerAfCloses Number of times peer closes TCP	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.6
rcStatBgpPeerAfFails Number of times peer TCP attempts failed	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.7
rcStatBgpPeerAfFatals Number of times peer TCP crashes due to fatal error	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.8
rcStatBgpPeerAfConnExps Number of times peer TCP retry timer expired	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.9
rcStatBgpPeerAfHoldExps Number of times peer hold timer expired	SNMPv2-SMICounter32 Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.12.13.1.10
rcStatBgpPeerAfKeepExps Number of times peer keepalive timer expired	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.11
rcStatBgpPeerAfTxMsgs Total messages send by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.12
rcStatBgpPeerAfTxOpens Opens sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.13
rcStatBgpPeerAfTxKeeps Keepalives sent by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.14
rcStatBgpPeerAfTxUpdates Updates sent by the peer	SNMPv2-SMICounter32 Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d 4 pvst Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.15
rcStatBgpPeerAfTxNotifys Notifications sent by the peer	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.12.13.1.16
rcStatBgpPeerAfRxMsgs Total messages received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.17
rcStatBgpPeerAfRxInCompPkts Incomplete message received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.18
rcStatBgpPeerAfRxOpens Opens received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.19
rcStatBgpPeerAfRxKeeps Keepalives received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.20
rcStatBgpPeerAfRxUpdates Updates received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.21
rcStatBgpPeerAfRxNotifys Notifications received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.22
rcStatBgpPeerAfBadEvents Number of invalid events received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.23
rcStatBgpPeerAfSyncFails Number of times FDB sync failed of the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.24
rcStatBgpPeerAfRcvdTooShort Number of messages recieved by the peer that is too sho rt	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.25
rcStatBgpPeerAfNoMarker Number of messages without marker recieved by the peer	SNMPv2-SMICounter32 Constraints: range: 600-4000	.1.3.6.1.4.1.2272.1.12.13.1.26
rcStatBgpPeerAfDropped Number of messages the peer has dropped	SNMPv2-SMICounter32 Constraints: range: 100-1000	.1.3.6.1.4.1.2272.1.12.13.1.27
rcStatBgpPeerAfBadMsgTypes Number of messages with invalid message type	SNMPv2-SMICounter32 Constraints: range: 400-3000	.1.3.6.1.4.1.2272.1.12.13.1.28
rcStatBgpPeerAfTrEvent Peer trace event	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.29
rcStatBgpPeerAfTxRoutes Number of NLRI sent by peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.30
rcStatBgpPeerAfRxRoutesAdded Number of routes added into loc_rib by this peer	SNMPv2-SMICounter32 Constraints: range: 0-104	.1.3.6.1.4.1.2272.1.12.13.1.31
rcStatBgpPeerAfRxRoutesReplaced Number of routes replaced by the routes received by the peer	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.32
rcStatBgpPeerAfRxNlri Number of NLRI received by the peer	SNMPv2-SMICounter32 Constraints: range: 208-208	.1.3.6.1.4.1.2272.1.12.13.1.33
rcStatBgpPeerAfRxValidUpdates Number of valid UPDATEs received by the peer	SNMPv2-SMICounter32 Enumerated Values: 1 normal 2 svlan 3 pbt 6 plsb 7 spbm Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.34
rcStatBgpPeerAfRxECodeHeader Total errors peer received: Header	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.35
rcStatBgpPeerAfRxECodeOpen Total errors peer received: Open	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.36
rcStatBgpPeerAfRxECodeUpdate Total errors peer received: Update	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.37
rcStatBgpPeerAfRxECodeHoldtimer Total errors peer received: Hold	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.38
rcStatBgpPeerAfRxECodeFSM Total errors peer received: Fsm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.39
rcStatBgpPeerAfRxECodeCease Total errors peer received: Cease	SNMPv2-SMICounter32 Constraints: range: 1-128	.1.3.6.1.4.1.2272.1.12.13.1.40
rcStatBgpPeerAfRxHdrCodeNoSync Header errors peer received: Not Synchronized	SNMPv2-SMICounter32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.12.13.1.41
rcStatBgpPeerAfRxHdrCodeInvalidMsgLen Header errors peer received: Invalid message length	SNMPv2-SMICounter32 Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.42
rcStatBgpPeerAfRxHdrCodeInvalidMsgType Header errors peer received: Invalid message type	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.43
rcStatBgpPeerAfRxOpCodeBadVer Open errors peer received: Bad Version	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.44
rcStatBgpPeerAfRxOpCodeBadAs Open errors peer received: Bad AS number	SNMPv2-SMICounter32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.12.13.1.45
rcStatBgpPeerAfRxOpCodeBadRtID Open errors peer received: Bad BGP ID	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.46
rcStatBgpPeerAfRxOpCodeUnsuppOption Open errors peer received: Unsupported Options	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.47
rcStatBgpPeerAfRxOpCodeAuthFail Open errors peer received: Authorization failures	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.48
rcStatBgpPeerAfRxOpCodeBadHold Open errors peer received: Bad Hold value	SNMPv2-SMICounter32 Constraints: range: 2-2	.1.3.6.1.4.1.2272.1.12.13.1.49
rcStatBgpPeerAfRxUpdCodeMalformedAttrList Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.50
rcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.51
rcStatBgpPeerAfRxUpdCodeWelknownAttrMiss Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.52
rcStatBgpPeerAfRxUpdCodeAttrFlagError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.53
rcStatBgpPeerAfRxUpdCodeAttrLenError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.54
rcStatBgpPeerAfRxUpdCodeBadORIGINAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.55
rcStatBgpPeerAfRxUpdCodeASRoutingLoop Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.56
rcStatBgpPeerAfRxUpdCodeBadNHAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.57
rcStatBgpPeerAfRxUpdCodeOptionalAttrError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Constraints: range: 1-200000000	.1.3.6.1.4.1.2272.1.12.13.1.58
rcStatBgpPeerAfRxUpdCodeBadNetworkField Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.12.13.1.59
rcStatBgpPeerAfRxUpdCodeMalformedASPath Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Constraints: range: 0-200000000	.1.3.6.1.4.1.2272.1.12.13.1.60
rcStatBgpPeerAfTxECodeHeader Total errors peer received: Header	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.61
rcStatBgpPeerAfTxECodeOpen Total errors peer received: Open	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.62
rcStatBgpPeerAfTxECodeUpdate Total errors peer received: Update	SNMPv2-SMICounter32 Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt 6 discard Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.63
rcStatBgpPeerAfTxECodeHoldtimer Total errors peer received: Hold	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.64
rcStatBgpPeerAfTxECodeFSM Total errors peer received: Fsm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.65
rcStatBgpPeerAfTxECodeCease Total errors peer received: Cease	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.66
rcStatBgpPeerAfTxHdrCodeNoSync Header errors peer received: Not Synchronized	SNMPv2-SMICounter32 Enumerated Values: 0 low 1 high Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.67
rcStatBgpPeerAfTxHdrCodeInvalidMsgLen Header errors peer received: Invalid message length	SNMPv2-SMICounter32 Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.68
rcStatBgpPeerAfTxHdrCodeInvalidMsgType Header errors peer received: Invalid message type	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.69
rcStatBgpPeerAfTxOpCodeBadVer Open errors peer received: Bad Version	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.70
rcStatBgpPeerAfTxOpCodeBadAs Open errors peer received: Bad AS number	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.71
rcStatBgpPeerAfTxOpCodeBadRtID Open errors peer received: Bad BGP ID	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.72
rcStatBgpPeerAfTxOpCodeUnsuppOption Open errors peer received: Unsupported Options	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.73
rcStatBgpPeerAfTxOpCodeAuthFail Open errors peer received: Authorization failures	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.74
rcStatBgpPeerAfTxOpCodeBadHold Open errors peer received: Bad Hold value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.75
rcStatBgpPeerAfTxUpdCodeMalformedAttrList Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Enumerated Values: 0 low 1 high Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.76
rcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.77
rcStatBgpPeerAfTxUpdCodeWelknownAttrMiss Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.78
rcStatBgpPeerAfTxUpdCodeAttrFlagError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.79
rcStatBgpPeerAfTxUpdCodeAttrLenError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.80
rcStatBgpPeerAfTxUpdCodeBadORIGINAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.81
rcStatBgpPeerAfTxUpdCodeASRoutingLoop Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.82
rcStatBgpPeerAfTxUpdCodeBadNHAttr Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.83
rcStatBgpPeerAfTxUpdCodeOptionalAttrError Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Constraints: range: 88-88	.1.3.6.1.4.1.2272.1.12.13.1.84
rcStatBgpPeerAfTxUpdCodeBadNetworkField Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.85
rcStatBgpPeerAfTxUpdCodeMalformedASPath Update errors peer received: Malformed Attr List	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.13.1.86
rcStatBgpPeerAfReset reset peer stats	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.12.13.1.87

rcStgTable

table

.1.3.6.1.4.1.2272.1.13.4 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStgTable'

Copy

A table used to store Spanning Tree Group (STG)
information.  Each row in the table specifies
a different STG in the device.

rcStgEntry row .1.3.6.1.4.1.2272.1.13.4.1

STG attributes

Indexes

No indexes recorded

Column	Syntax	OID
rcStgId An identifier used to identify a STG in the device.	Integer32	.1.3.6.1.4.1.2272.1.13.4.1.1
rcStgTaggedBpduAddress The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-00-00.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.13.4.1.2
rcStgTaggedBpduVlanId The VLAN ID to be used for tagging BPDUs.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.13.4.1.3
rcStgBridgeAddress The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only req…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.13.4.1.4
rcStgNumPorts The number of ports controlled by this bridging entity.	SNMPv2-SMIInteger32 Enumerated Values: 1 oneShot 2 continuous Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.13.4.1.5
rcStgProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unlock 2 lock	.1.3.6.1.4.1.2272.1.13.4.1.6
rcStgPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of rcStgBridgeAddress.	Integer32r/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.13.4.1.7
rcStgTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	SNMPv2-SMITimeTicks Enumerated Values: 1 disable 2 enable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.4.1.8
rcStgTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Enumerated Values: 1 disable 2 enable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.4.1.9
rcStgDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BridgeId Enumerated Values: 1 none 2 monitor Type Constraints: range: 8	.1.3.6.1.4.1.2272.1.13.4.1.10
rcStgRootCost The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Enumerated Values: 1 low 2 high Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.13.4.1.11
rcStgRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	InterfaceIndex Constraints: range: 0-2048	.1.3.6.1.4.1.2272.1.13.4.1.12
rcStgMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	Timeout Constraints: range: 0-2048	.1.3.6.1.4.1.2272.1.13.4.1.13
rcStgHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	Timeout	.1.3.6.1.4.1.2272.1.13.4.1.14
rcStgHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.13.4.1.15
rcStgForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	Timeout	.1.3.6.1.4.1.2272.1.13.4.1.16
rcStgBridgeMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeHelloTime. The granularity of th…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.4.1.17
rcStgBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.4.1.18
rcStgBridgeForwardDelay The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeMaxAge. The granularity o…	Integer32r/w Enumerated Values: 1 low 2 high	.1.3.6.1.4.1.2272.1.13.4.1.19
rcStgEnableStp Indicate whether the spanning tree protocol should be active in this STG.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 other 2 invalid 3 active Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.4.1.20
rcStgStpTrapEnable Indicate whether traps relating to the spanning tree protocol should be sent for this STG.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.4.1.21
rcStgPortMembers A bitfield used to identify which ports in the system are members this STG. The bitfield is 104 octets long representing ports 64 (1/1) to 831 (12/68) (inclusive).	OctetStringr/w	.1.3.6.1.4.1.2272.1.13.4.1.22
rcStgRowStatus Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.13.4.1.23
rcStgPortStpState Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3).	OctetString	.1.3.6.1.4.1.2272.1.13.4.1.24
rcStgType Type of Stg.	Enumerationr/w	.1.3.6.1.4.1.2272.1.13.4.1.25
rcStgNtStgEnable Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 low 2 high Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.4.1.26
rcStgLPortMembers A bitfield used to identify which logical ports (for example, WLAN tunnels) in the system are members of this STG. The bitfield is 256 octets long representing ports 704 to 2752 (inclusive).	LPortSet Enumerated Values: 0 none 1 convertToManualEdit Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.13.4.1.27

rcStgPortTable

table

.1.3.6.1.4.1.2272.1.13.5 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcStgPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcStgPortTable'

Copy

A table used to store Spanning Tree Group (STG)
port related information.  If a port is 
associated with more than one STGs, the port  
will have one entry in this table for each STG 
it assigned to.

rcStgPortEntry row .1.3.6.1.4.1.2272.1.13.5.1

STG Port attributes

Indexes

rcBridgeStaticMulticastAddress rcBridgeStaticMulticastVlanId

Column	Syntax	OID
rcStgPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.13.5.1.1
rcStgPortStgId The STG identifier this port is assigned to.	Integer32	.1.3.6.1.4.1.2272.1.13.5.1.2
rcStgPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rcStgPort.	Integer32r/w	.1.3.6.1.4.1.2272.1.13.5.1.3
rcStgPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration	.1.3.6.1.4.1.2272.1.13.5.1.4
rcStgPortEnableStp The enabled/disabled status of the port.	SNMPv2-TCTruthValuer/w Constraints: range: 1-4095 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.5.1.5
rcStgPortFastStart When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.5.1.6
rcStgPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.5.1.7
rcStgPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.2272.1.13.5.1.8
rcStgPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.13.5.1.9
rcStgPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BridgeId Enumerated Values: 1 multicast 2 broadcast 3 broadcast-multicast Type Constraints: range: 8	.1.3.6.1.4.1.2272.1.13.5.1.10
rcStgPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 1-25	.1.3.6.1.4.1.2272.1.13.5.1.11
rcStgPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.5.1.12
rcStgPortInConfigBpdus The number of Config BPUDs received by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.5.1.13
rcStgPortInTcnBpdus The number of Topology Change Notification BPUDs received by this port.	SNMPv2-SMICounter32 Constraints: range: 250-2147483647	.1.3.6.1.4.1.2272.1.13.5.1.14
rcStgPortInBadBpdus The number of Bad BPUDs received by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.5.1.15
rcStgPortOutConfigBpdus The number of Config BPUDs transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.5.1.16
rcStgPortOutTcnBpdus The number of Topology Change Notification BPUDs transmitted by this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.13.5.1.17
rcStgPortRowStatus Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.13.5.1.18
rcStgPortChangeDetection If disabled, topology change notifications are not sent for the port.	SNMPv2-TCTruthValuer/w Constraints: range: 1-4095 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.13.5.1.19
rcStgPortPathCost32 The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.5.1.20
rcStgPortAdminPathCost The administrative value of rcStgPortPathCost. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a Set request on rcStgPortPathCost will also modify the corre…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.5.1.21
rcStgPortAdminPathCost32 The administrative value of rcStgPortPathCost32. This is the value that has been configured by the user, or 0 if there is no user-configured value. Note that a Set request on rcStgPortPathCost32 will also modify the c…	Integer32r/w	.1.3.6.1.4.1.2272.1.13.5.1.22

rcBridgeFdbTable

table obsolete

.1.3.6.1.4.1.2272.1.14.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeFdbTable'

Copy

This table is an replacement to the standard 
dot1dTpFdbTable in rfc1493.

rcBridgeFdbEntry row .1.3.6.1.4.1.2272.1.14.1.1

Information about a specific unicast MAC address
for which the bridge has some forwarding information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeFdbStatusobsolete This object indicates the status of this entry.	Enumeration	.1.3.6.1.4.1.2272.1.14.1.1.1
rcBridgeFdbAddressobsolete A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.1.1.2
rcBridgeFdbPortobsolete Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeFdbAddress has been seen. A value of '0' indicates that the port…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.1.1.3
rcBridgeFdbMonitorobsolete Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to rec…	SNMPv2-TCTruthValuer/w Constraints: range: 1-4094 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.1.1.4
rcBridgeFdbPriorityobsolete Used to indicate the priority of the incoming frames with this destination Mac Address.	Enumerationr/w Enumerated Values: 1 none 2 srcDrop 3 dstDrop 4 bothDrop	.1.3.6.1.4.1.2272.1.14.1.1.5
rcBridgeFdbQosLevelobsolete Used to indicate the qos level of the incoming frames with this destination Mac Address.	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.2272.1.14.1.1.6
rcBridgeFdbSmltRemoteobsolete A MAC address indicate for remote learnt, either local or remote.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.1.1.7
rcBridgeFdbVlanIdobsolete	RcVlanIdOrNone Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.14.1.1.8

rcBridgeStaticTable

table

.1.3.6.1.4.1.2272.1.14.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeStaticTable'

Copy

This table is a proprietary replacement to the 
standard dot1dStaticTable in rfc1493.

rcBridgeStaticEntry row .1.3.6.1.4.1.2272.1.14.3.1

A table containing forwarding information about
unicast entries configured into the bridge by
management. This information is used by the
transparent bridging function in determining how
to propagate a received fram…

Indexes

rcBridgeFdbProtectPortNum

Column	Syntax	OID
rcBridgeStaticAddress The MAC address of this entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.3.1.1
rcBridgeStaticPort Port on which the MAC address is found.	InterfaceIndex Constraints: range: 1-1000000	.1.3.6.1.4.1.2272.1.14.3.1.2
rcBridgeStaticMonitor Used to indicate whether monitoring should be performed on incoming packets that match this entry.	SNMPv2-TCTruthValuer/w Constraints: range: 1-1000000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.3.1.3
rcBridgeStaticPriorityobsolete Used to indicate forwarding priority of incoming packets that match this entry.	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.3.1.4
rcBridgeStaticStatus This object indicates the status of this entry. The default value is permanent(3).	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.3.1.5
rcBridgeStaticQosLevel Used to indicate the qos level.	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.3.1.6
rcBridgeStaticVlanId	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.14.3.1.7

rcBridgeFilterTable

table

.1.3.6.1.4.1.2272.1.14.5 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeFilterTable'

Copy

This table is a proprietary replacement to the 
standard dot1dStaticTable (Filtering information) 
in rfc1493.

rcBridgeFilterEntry row .1.3.6.1.4.1.2272.1.14.5.1

A table containing filtering information configured
into the bridge by management specifying a dest-
ination address on a specific port and a set of
incoming ports. Frames received from one of the
incoming ports and …

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeFilterAddress The MAC address of this entry. This address is used to match the destination address of incoming packets.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.5.1.1
rcBridgeFilterPort Port on which this MAC address is found.	InterfaceIndex Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt 6 discard Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.5.1.2
rcBridgeFilterNotAllowedFromobsolete Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.14.5.1.3
rcBridgeFilterStatus This object indicates the status of this entry. The default value is permanent(3).	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.5.1.4
rcBridgeFilterVlanId	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.14.5.1.5
rcBridgeFilterPcap To enable pcap for the fdb-filter	SNMPv2-TCTruthValuer/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7 Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.5.1.6
rcBridgeFilterDestDiscard Used to indicate a set of ports. Traffic arriving on any of the specified ports from this MAC address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.14.5.1.7
rcBridgeFilterSrcDiscard Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.14.5.1.8

rcBridgeUnknownMacDiscardTable

table

.1.3.6.1.4.1.2272.1.14.7 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeUnknownMacDiscardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeUnknownMacDiscardTable'

Copy

This table is used to configure the 'unknown mac discard' feature.
This feature applies to layer 2 and layer 3 packets coming from 
or going out to a specific physical port.

rcBridgeUnknownMacDiscardEntry row .1.3.6.1.4.1.2272.1.14.7.1

A table containing information configuring
the 'unknown mac discard' feature.

Indexes

rcBridgeMmrpGrpFdbVlanId rcBridgeMmrpGrpFdbAddr

Column	Syntax	OID
rcBridgeUnknownMacDiscardIfIndex Port on which this 'unknown mac discard' configuration applied to.	InterfaceIndex Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.14.7.1.1
rcBridgeUnknownMacDiscardAutoLearnEnable This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.7.1.2
rcBridgeUnknownMacDiscardAutoLearnMode This variable is used to control the auto-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number n is dependents on the system's available resource. In co…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.3
rcBridgeUnknownMacDiscardAutoLearnTableMode This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learned MAC will be aged out. User needs to lock the auto-learn…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.4
rcBridgeUnknownMacDiscardLogViolations This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will be written to the system log file when a violation event…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.5
rcBridgeUnknownMacDiscardSendTrap This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet will be send to the management station when a violation e…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.6
rcBridgeUnknownMacDiscardDisablePort This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific port will be disabled when the violation event was detecte…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.7
rcBridgeUnknownMacDiscardDefaultAutoLearnMonitorobsolete This variable controls the default monitor setting of an auto-learn MAC address. The value 'monitor' means a copy of packet that send from or to the auto-learned MAC address will be forwarded to the designated monito…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.2272.1.14.7.1.8
rcBridgeUnknownMacDiscardDefaultAutoLearnPriorityobsolete This variable controls the default priority setting of an auto-learn MAC address. The value 'low' means packets send from the MAC address is forwarded at low priority. The value 'high' means packets send from the MAC ad…	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.7.1.9
rcBridgeUnknownMacDiscardMacCountMax This variable represents the maxium number of MACc that can be added to some port.	Integer32r/w	.1.3.6.1.4.1.2272.1.14.7.1.10
rcBridgeUnknownMacDiscardMacCountCur This variable represents the current number of MACs that have been added to some port.	Integer32	.1.3.6.1.4.1.2272.1.14.7.1.11

rcBridgeManualEditTable

table

.1.3.6.1.4.1.2272.1.14.8 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeManualEditTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeManualEditTable'

Copy

This table is used to specify what MAC addresses can be learned 
on each port.

rcBridgeManualEditEntry row .1.3.6.1.4.1.2272.1.14.8.1

A table containing information of
MAC addresses that can be learned.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeManualEditAddress This variable contains the source MAC address of an entry.	SNMPv2-TCMacAddress Constraints: range: 1-4096 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.8.1.1
rcBridgeManualEditPorts This variable contains the allowed ports on which the MAC address of this entry can be learned.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.14.8.1.2
rcBridgeManualEditMonitor This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. The …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.8.1.3
rcBridgeManualEditPriority This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The default value is low.	Enumerationr/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.14.8.1.4
rcBridgeManualEditStatus The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is used to delete the MAC address from the table.	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.8.1.5

rcBridgeAutoLearnTable

table

.1.3.6.1.4.1.2272.1.14.10 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeAutoLearnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeAutoLearnTable'

Copy

This table contains information of auto-learned MAC address when 
the 'unknow MAC discard' table's auto-learn is enabled. User must 
explicitly lock and save the table into NVRAM in order to have 
this table has the same configuration cross the system reset.

rcBridgeAutoLearnEntry row .1.3.6.1.4.1.2272.1.14.10.1

Entries in this table are created automatically
when the user explicitly does a lock operation on
the auto-learn-table (i.e., when 'AutoLearnTableMode'
is set to lock(2)).

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeAutoLearnAddress This variable contains the source MAC address of the entries.	SNMPv2-TCMacAddress Constraints: range: 1-4094 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.10.1.1
rcBridgeAutoLearnPort This variable contains the port where the MAC address was learned.	PortSet Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.14.10.1.2
rcBridgeAutoLearnMonitor This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. This val…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.10.1.3
rcBridgeAutoLearnPriority This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The value 'high' means packet frames send from the MAC addre…	Enumeration Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.14.10.1.4
rcBridgeAutoLearnAction This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC address entry from auto-learn table to manual edit table.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.14.10.1.5

rcBridgeStaticMulticastTable

table obsolete

.1.3.6.1.4.1.2272.1.14.12 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeStaticMulticastTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeStaticMulticastTable'

Copy

rcBridgeStaticMulticastEntry row .1.3.6.1.4.1.2272.1.14.12.1

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeStaticMulticastAddressobsolete src mac addr.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.12.1.1
rcBridgeStaticMulticastForwardingPortsobsolete ports for forward this mac	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.14.12.1.2
rcBridgeStaticMulticastMltIdsobsolete list of mlts this mac will be forwarded on	IdListr/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.14.12.1.3
rcBridgeStaticMulticastRowStatusobsolete row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.14.12.1.4
rcBridgeStaticMulticastVlanIdobsolete Vlan Id	Integer32 Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.2272.1.14.12.1.5
rcBridgeStaticMulticastNumMltIdsobsolete number of mlts Ids	SNMPv2-SMIInteger32 Enumerated Values: 1 local 2 remote Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.14.12.1.6

rcRateLimitTable

table

.1.3.6.1.4.1.2272.1.14.14 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRateLimitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRateLimitTable'

Copy

rcRateLimitEntry row .1.3.6.1.4.1.2272.1.14.14.1

Indexes

No indexes recorded

Column	Syntax	OID
rcRateLimitIfIndex Port ifindex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.14.1.1
rcRateLimitIfTrafficType Type of traffic allowed.	Enumerationr/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.14.14.1.2
rcRateLimitIfAllowedRate Allowed traffic rate. If chassis type is 8100.	Integer32r/w	.1.3.6.1.4.1.2272.1.14.14.1.3
rcRateLimitIfEnable Turn on/off rate limiting on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.14.1.4
rcRateLimitIfAllowedRatePps Allowed traffic rate packets per second. If chassis type is 8600.	SNMPv2-SMIInteger32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.14.14.1.5
rcRateLimitIfAllowedRateKbps Allowed traffic rate Kbits per second. If chassis type is R-module.	Integer32r/w	.1.3.6.1.4.1.2272.1.14.14.1.6
rcRateLimitEgressRateLimit Egress Rate Limit.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.14.14.1.7
rcRateLimitEgressRateLimitState Used to enable/disable shape/egress-rate-limit functionality.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.14.14.1.8

rcBridgeStaticMcastTable

table

.1.3.6.1.4.1.2272.1.14.15 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeStaticMcastTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeStaticMcastTable'

Copy

rcBridgeStaticMcastEntry row .1.3.6.1.4.1.2272.1.14.15.1

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeStaticMcastVlanId Vlan Id	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.14.15.1.1
rcBridgeStaticMcastAddress src mac addr.	SNMPv2-TCMacAddress Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.15.1.2
rcBridgeStaticMcastForwardingPorts ports for forward this mac	PortSetr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.14.15.1.3
rcBridgeStaticMcastMltIds list of mlts this mac will be forwarded on	IdListr/w	.1.3.6.1.4.1.2272.1.14.15.1.4
rcBridgeStaticMcastNumMltIds number of mlts Ids	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.14.15.1.5
rcBridgeStaticMcastRowStatus row status	SNMPv2-TCRowStatusr/w Constraints: range: 1-16777215 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.14.15.1.6

rcBridgePP8300FilterTable

table

.1.3.6.1.4.1.2272.1.14.16 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgePP8300FilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgePP8300FilterTable'

Copy

This table is a proprietary replacement to the
standard dot1dStaticTable (Filtering information)
in rfc1493. This table is specific for PP8300.

rcBridgePP8300FilterEntry row .1.3.6.1.4.1.2272.1.14.16.1

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgePP8300FilterAddress The MAC address of this entry. This address is used to match the destination address of incoming packets.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.16.1.1
rcBridgePP8300FilterVlanId	Integer32 Enumerated Values: 1 local 2 remote 3 ist-peer	.1.3.6.1.4.1.2272.1.14.16.1.2
rcBridgePP8300FilterDropCommand	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.16.1.3
rcBridgePP8300FilterQosLevel Used to indicate the qos level.	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.16.1.4
rcBridgePP8300FilterPort Mac filter needs the device Id and port Id programmed properly to make the SA drop working properly	SNMPv2-SMIInteger32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.14.16.1.5
rcBridgePP8300FilterStatus This object indicates the status of this entry. The default value is permanent(3).	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.16.1.6

rcBridgeFdbProtectTable

table

.1.3.6.1.4.1.2272.1.14.17 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeFdbProtectTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeFdbProtectTable'

Copy

This table gives information about the mac learning
limits on a particular port.

rcBridgeFdbProtectEntry row .1.3.6.1.4.1.2272.1.14.17.1

Information about a specific MAC address learning
limits of a specific port.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeFdbProtectPortNum This object is the interface on which MAC address learning limit is applied.	InterfaceIndex Enumerated Values: 1 compressed 2 uncompressed Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.17.1.1
rcBridgeFdbProtectMaxMacCount Used to indicate maximum number of MAC address that can be learnt on the port.	Integer32r/w	.1.3.6.1.4.1.2272.1.14.17.1.2
rcBridgeFdbProtectMinMacCount Used to indicate minimum number of MAC address learnt which mac address learning will be re-enabled on the port.	Integer32r/w	.1.3.6.1.4.1.2272.1.14.17.1.3
rcBridgeFdbProtectEnable Used to enable or disable MAC learning limit feature on the port.	EnableValuer/w Enumerated Values: 1 active 2 deleted	.1.3.6.1.4.1.2272.1.14.17.1.4
rcBridgeFdbProtectCurrentMacCount This object indicates the current number of MAC address learnt on the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.14.17.1.5
rcBridgeFdbProtectMacLearning This object indicates whether the port can currrently learn new MAC addresses or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.17.1.6
rcBridgeFdbProtectViolationLogTrap Used to enable or disable logging and sending of snmp trap, once MAC learning limit is reached for the port.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.14.17.1.7
rcBridgeFdbProtectViolationDownPort Used to enable or disable the action of disabling the port, once MAC learning limit is reached for the port.	EnableValuer/w Constraints: range: 0-128 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.14.17.1.8

rcBridgeNewFdbTable

table

.1.3.6.1.4.1.2272.1.14.18 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeNewFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeNewFdbTable'

Copy

This table is an replacement to the standard
dot1dTpFdbTable in rfc1493.

rcBridgeNewFdbEntry row .1.3.6.1.4.1.2272.1.14.18.1

Information about a specific unicast MAC address
for which the bridge has some forwarding information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeNewFdbStatus This object indicates the status of this entry.	Enumerationr/w Enumerated Values: 1 config 2 log 3 trace 4 executable	.1.3.6.1.4.1.2272.1.14.18.1.1
rcBridgeNewFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Enumerated Values: 1 compressed 2 uncompressed Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.18.1.2
rcBridgeNewFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeNewFdbAddress has been seen. A value of '0' indicates that the p…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.18.1.3
rcBridgeNewFdbMonitor Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to rec…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.18.1.4
rcBridgeNewFdbQosLevel Used to indicate the qos level of the incoming frames with this destination Mac Address.	Enumerationr/w Enumerated Values: 1 active 2 deleted	.1.3.6.1.4.1.2272.1.14.18.1.5
rcBridgeNewFdbSmltRemote A MAC address indicate for remote learnt, either local or remote.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.18.1.6
rcBridgeNewFdbVlanId Used to indicate the Vlan ID for this MAC address.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.14.18.1.7

rcBridgeMmrpGrpFdbTable

table

.1.3.6.1.4.1.2272.1.14.19 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeMmrpGrpFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeMmrpGrpFdbTable'

Copy

This table is for multicast group fdb entries

rcBridgeMmrpGrpFdbEntry row .1.3.6.1.4.1.2272.1.14.19.1

Information about a specific multicast group MAC
address for which the bridge has some forwarding
information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeMmrpGrpFdbVlanId Used to indicate the Vlan ID for this MAC address.	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.14.19.1.1
rcBridgeMmrpGrpFdbAddr A multicast group MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.19.1.2
rcBridgeMmrpGrpFdbPortList List of ports	PortSet Enumerated Values: 1 access 2 trunk Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.14.19.1.3

rcBridgeTpFdbTable

table

.1.3.6.1.4.1.2272.1.14.20 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeTpFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeTpFdbTable'

Copy

This table is an replacement to the standard
dot1dTpFdbTable in rfc1493.

rcBridgeTpFdbEntry row .1.3.6.1.4.1.2272.1.14.20.1

Information about a specific unicast MAC address
for which the bridge has some forwarding information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeTpFdbVlanId Used to indicate the Vlan ID for this MAC address.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.14.20.1.1
rcBridgeTpFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.20.1.2
rcBridgeTpFdbStatus This object indicates the status of this entry.	Enumerationr/w	.1.3.6.1.4.1.2272.1.14.20.1.3
rcBridgeTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeTpFdbAddress has been seen. A value of '0' indicates that the po…	InterfaceIndex Enumerated Values: 1 none 2 basic 3 advanced 4 enhanced Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.20.1.4
rcBridgeTpFdbSmltRemote A MAC address indicate for remote learnt, either local or remote.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.20.1.5
rcBridgeTpFdbBMac If the rcBridgeTpFdbEntry is learned from a SPBM network, instead of using port to track where the rcBridgeTpFdbAddress come from, the backbone MAC address is used to track that.	SNMPv2-TCMacAddress Enumerated Values: 1 normalMLT 2 istMLT 3 splitMLT 4 virtualIstMLT Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.20.1.6
rcBridgeTpFdbMonitor Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to rec…	SNMPv2-TCTruthValuer/w Constraints: range: 1-512 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.20.1.7
rcBridgeTpFdbQosLevel Used to indicate the qos level of the incoming frames with this destination Mac Address.	Enumerationr/w Enumerated Values: 1 normalMLT 2 istMLT 3 splitMLT 4 virtualIstMLT	.1.3.6.1.4.1.2272.1.14.20.1.8
rcBridgeTpFdbCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case.	Integer32 Enumerated Values: 1 normal 2 uni 3 nni	.1.3.6.1.4.1.2272.1.14.20.1.9

rcBridgeRemoteMacTable

table

.1.3.6.1.4.1.2272.1.14.21 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeRemoteMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeRemoteMacTable'

Copy

This table is for PLSB cvlan UNI remote mac entries

rcBridgeRemoteMacEntry row .1.3.6.1.4.1.2272.1.14.21.1

Information about a specific cvlan UNI remote MAC
address for which the bridge has the forwarding
information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeRemoteMacVlanId Used to indicate the Vlan ID for this MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.21.1.1
rcBridgeRemoteMacAddr A customer MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Enumerated Values: 1 clear 2 none Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.21.1.2
rcBridgeRemoteMacStatus This object indicates the status of this entry.	Enumeration	.1.3.6.1.4.1.2272.1.14.21.1.3
rcBridgeRemoteMacDestAddr A provider MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.21.1.4
rcBridgeRemoteMacPrimaryBVlanId Used to indicate the BVlan ID for this MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.21.1.5
rcBridgeRemoteMacPrimaryDestSysName Primary System name of the node where MAC address entry come from.	OctetString	.1.3.6.1.4.1.2272.1.14.21.1.6
rcBridgeRemoteMacPrimaryPort Either the value '0', or the primary port on which a frame came from.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.21.1.7
rcBridgeRemoteMacSecondaryBVlanId Used to indicate the BVlan ID for this MAC address.	Integer32 Enumerated Values: 1 bmac 2 cmac 3 bvid 4 isid	.1.3.6.1.4.1.2272.1.14.21.1.8
rcBridgeRemoteMacSecondaryDestSysName Secondary System name of the node where MAC address entry come from.	OctetString Constraints: range: 0-448	.1.3.6.1.4.1.2272.1.14.21.1.9
rcBridgeRemoteMacSecondaryPort Either the value '0', or the secondary port on which a frame came from.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.21.1.10
rcBridgeRemoteMacSmltRemote A MAC address indicate for remote learnt from ist peer	SNMPv2-TCTruthValue Constraints: range: 1-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.14.21.1.11

rcBridgeSpbmMacTable

table

.1.3.6.1.4.1.2272.1.14.22 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeSpbmMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeSpbmMacTable'

Copy

This table is for SPBM UNI MAC entries, local and remote

rcBridgeSpbmMacEntry row .1.3.6.1.4.1.2272.1.14.22.1

Information about a specific SPBM UNI MAC
address for which the bridge has the forwarding
information. MAC address can belong any SPBM UNI type,
local or remote

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeSpbmMacIsid Used to indicate the ISID for this MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.22.1.1
rcBridgeSpbmMacAddr A customer MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.22.1.2
rcBridgeSpbmMacStatus This object indicates the status of this entry.	Enumeration	.1.3.6.1.4.1.2272.1.14.22.1.3
rcBridgeSpbmMacType This object indicates the type of this entry, local or remote.	Enumeration Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.14.22.1.4
rcBridgeSpbmMacCVlanId Used to indicate the CVlan ID for this local MAC address.	Integer32 Constraints: range: 1518-9600	.1.3.6.1.4.1.2272.1.14.22.1.5
rcBridgeSpbmMacCPort Used to indicate the ifIndex for this local MAC address.	InterfaceIndex Enumerated Values: 1 normal 2 silent 3 uni Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.22.1.6
rcBridgeSpbmMacBDestAddr A provider MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.22.1.7
rcBridgeSpbmMacBVlanId Used to indicate the BVlan ID for this remote MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.22.1.8

rcBridgeIsidFdbTable

table

.1.3.6.1.4.1.2272.1.14.23 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeIsidFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeIsidFdbTable'

Copy

This table is for all the mac entries that are learned
on the per i-sid basis.This gives both the locally learnt
and remote mac entries.

rcBridgeIsidFdbEntry row .1.3.6.1.4.1.2272.1.14.23.1

Information about a UNI MAC address for
which the bridge has the forwarding information.

Indexes

No indexes recorded

Column	Syntax	OID
rcBridgeIsidFdbIsidId Used to indicate the i-sid for this MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.23.1.1
rcBridgeIsidFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Constraints: range: 0-512 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.23.1.2
rcBridgeIsidFdbStatus This object indicates the status of this entry.	Enumeration Enumerated Values: 1 none 2 local 3 remote 4 localAndRemote	.1.3.6.1.4.1.2272.1.14.23.1.3
rcBridgeIsidFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeIsidFdbAddress has been seen.	InterfaceIndex Enumerated Values: 1 none 2 local 3 remote 4 localAndRemote Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.23.1.4
rcBridgeIsidFdbPortType This object indicates the whether the rcBridgeIsidFdbAddress is learnt locally or learnt on NNI port from a remote destination.	Enumeration	.1.3.6.1.4.1.2272.1.14.23.1.5
rcBridgeIsidFdbRemoteMacDestAddr A provider MAC address for which the bridge has forwarding and/or filtering information. This value is displayed only if the PortType is remote otherwise a value of zero is displayed.	SNMPv2-TCMacAddress Enumerated Values: 1 trunk 2 isolated 3 promiscuous 4 none Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.23.1.6
rcBridgeIsidFdbRemoteMacBVlanId Used to indicate the BVlan ID for this MAC address if it is learnt remotely Otherwise a value of 0 is displayed.	Integer32 Enumerated Values: 1 all-ports 2 single-port	.1.3.6.1.4.1.2272.1.14.23.1.7
rcBridgeIsidFdbRemoteMacDestSysName Primary System name of the node where MAC address entry in case of remote otherwise NULL is shown.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.14.23.1.8
rcBridgeIsidFdbCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case	Integer32	.1.3.6.1.4.1.2272.1.14.23.1.9

rcBridgeVnidFdbTable

table

.1.3.6.1.4.1.2272.1.14.24 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBridgeVnidFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBridgeVnidFdbTable'

Copy

This table is used to store all the mac entries that are learned
on the given vnid.This gives both the locally learnt
and remote mac entries.

rcBridgeVnidFdbEntry row .1.3.6.1.4.1.2272.1.14.24.1

Information about a MAC address for
which the bridge has the forwarding information.

Indexes

rcSltPortIfIndex

Column	Syntax	OID
rcBridgeVnidFdbVnid Used to identify the vnid value uniquely for the MAC address.	Integer32	.1.3.6.1.4.1.2272.1.14.24.1.1
rcBridgeVnidFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	SNMPv2-TCMacAddress Constraints: range: 1-512 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.14.24.1.2
rcBridgeVnidFdbStatus This object indicates the status of this entry.	Enumeration Enumerated Values: 1 normal 2 smlt	.1.3.6.1.4.1.2272.1.14.24.1.3
rcBridgeVnidFdbInterfaceIndex The IfIndex of the interface on which a frame having a source address equal to the value of the corresponding instance of rcBridgeVnidFdbAddress has been learnt.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.14.24.1.4
rcBridgeVnidFdbType This object indicates the whether the rcBridgeVnidFdbAddress is learnt locally or learnt on NNI from a remote destination.	Enumeration	.1.3.6.1.4.1.2272.1.14.24.1.5

rcDeviceFlashTable

table obsolete

.1.3.6.1.4.1.2272.1.16.25 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDeviceFlashTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDeviceFlashTable'

Copy

Flash table.

rcDeviceFlashEntry row .1.3.6.1.4.1.2272.1.16.25.1

An entry in the system's flash table.

Indexes

No indexes recorded

Column	Syntax	OID
rcDeviceFlashFileNumobsolete Used to indicate a particular file in flash.	Integer32	.1.3.6.1.4.1.2272.1.16.25.1.1
rcDeviceFlashFileNameobsolete Used to indicate a flash file's name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.16.25.1.2
rcDeviceFlashFileVersionobsolete Used to indicate the flash file's version.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.16.25.1.3
rcDeviceFlashFileTypeobsolete Used to indicate the flash file's type.	Enumeration	.1.3.6.1.4.1.2272.1.16.25.1.4
rcDeviceFlashFileModeobsolete Used to indicate the flash file's mode.	Enumeration	.1.3.6.1.4.1.2272.1.16.25.1.5
rcDeviceFlashFileSizeobsolete Used to indicate the flash file's size.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.16.25.1.6
rcDeviceFlashFileCrcobsolete Used to indicate the flash file's CRC.	SNMPv2-SMIInteger32 Constraints: range: 1-256	.1.3.6.1.4.1.2272.1.16.25.1.7
rcDeviceFlashFileStatusobsolete Used to indicate the flash file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'.	Enumeration Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.16.25.1.8
rcDeviceFlashRowStatusobsolete Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.16.25.1.9

rcDevicePcmciaTable

table obsolete

.1.3.6.1.4.1.2272.1.16.26 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDevicePcmciaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDevicePcmciaTable'

Copy

PCMCIA table.

rcDevicePcmciaEntry row .1.3.6.1.4.1.2272.1.16.26.1

An entry in the system's PCMCIA table.

Indexes

No indexes recorded

Column	Syntax	OID
rcDevicePcmciaFileNumobsolete Used to indicate a particular file in PCMCIA.	Integer32	.1.3.6.1.4.1.2272.1.16.26.1.1
rcDevicePcmciaFileNameobsolete Used to indicate the PCMCIA file's name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.16.26.1.2
rcDevicePcmciaFileVersionobsolete Used to indicate the PCMCIA file's version.	SNMPv2-TCDisplayString Constraints: range: 1-10 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.16.26.1.3
rcDevicePcmciaFileTypeobsolete Used to indicate the PCMCIA file's type.	Enumeration	.1.3.6.1.4.1.2272.1.16.26.1.4
rcDevicePcmciaFileModeobsolete Used to indicate a particular file in mode.	Enumeration Constraints: range: 514-530	.1.3.6.1.4.1.2272.1.16.26.1.5
rcDevicePcmciaFileSizeobsolete Used to indicate the PCMCIA file's size.	SNMPv2-SMIInteger32 Enumerated Values: 128 local0 136 local1 144 local2 152 local3 160 local4 168 local5 176 local6 184 local7 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.16.26.1.6
rcDevicePcmciaFileCrcobsolete Used to indicate the PCMCIA file's CRC.	SNMPv2-SMIInteger32 Enumerated Values: 1 common 2 snmp 4 rmon 8 portmgr 16 chasmgr 32 bridge 64 ospf 128 hwif 256 sim 512 cpp 1024 netdrv 2048 vlanmgr 4096 cli 8192 main 16384 p2ip 32768 rcip 65536 rompager 131072 acif 262144 gbip 524288 wdt 1048576 tdp 2097152 mandiag 4194304 mantest 8388608 igmp 16777216 ipfil 33554432 mlt 67108864 ippolicy 134217728 ipmc 268435456 syslog Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.16.26.1.7
rcDevicePcmciaFileStatusobsolete Used to indicate the PCMCIA file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'.	Enumeration	.1.3.6.1.4.1.2272.1.16.26.1.8
rcDevicePcmciaRowStatusobsolete Row status.	SNMPv2-TCRowStatusr/w Constraints: range: 1-31 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.16.26.1.9

rcMltTable

table

.1.3.6.1.4.1.2272.1.17.10 · 1 row entry · 49 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMltTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMltTable'

Copy

A list of Multi-Link Trunk entries. The number of 
entries is given by rcMltNumMlts.

rcMltEntry row .1.3.6.1.4.1.2272.1.17.10.1

Entry containing configuration information for a
particular Multi-Link Trunk.

Indexes

No indexes recorded

Column	Syntax	OID
rcMltId A value that uniquely identifies the Multi-Link Trunk associated with this entry.	Integer32 Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug	.1.3.6.1.4.1.2272.1.17.10.1.1
rcMltName An administratively-assigned name for this MLT.	OctetStringr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug	.1.3.6.1.4.1.2272.1.17.10.1.2
rcMltPortMembers The set of ports that are members of this MLT.	PortSetr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.17.10.1.3
rcMltPortType The type of MLT port: access(1) or trunk(2).	Enumerationr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug	.1.3.6.1.4.1.2272.1.17.10.1.4
rcMltNumVlanIds Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable.	SNMPv2-SMIInteger32 Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 info 8 debug Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.10.1.5
rcMltVlanIds An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the…	OctetStringr/w	.1.3.6.1.4.1.2272.1.17.10.1.6
rcMltRowStatus Used to create/delete entries in the rcMltTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.10.1.7
rcMltEnable Enable the entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.8
rcMltLoadBalance Perform load balance?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.9
rcMltDistributionAlgorithm none(1), ... It will be fill later	Enumerationr/w	.1.3.6.1.4.1.2272.1.17.10.1.10
rcMltIfIndex Used to indicate the 'logical' ifIndex assigned to this MLT.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.17.10.1.11
rcMltMltType MLT type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.17.10.1.12
rcMltSmltId Split MLT id.	Integer32r/w	.1.3.6.1.4.1.2272.1.17.10.1.13
rcMltRunningType Split MLT running type.	Enumeration Constraints: range: 1025-49151	.1.3.6.1.4.1.2272.1.17.10.1.14
rcMltSvlanPortType Set MLT port type.	Enumerationr/w Enumerated Values: 1 none 2 ssh 3 tls	.1.3.6.1.4.1.2272.1.17.10.1.15
rcMltMulticastDistribution Enable/Disable multicast distribution per mlt.	EnableValuer/w Constraints: range: 0-64 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.16
rcMltLacp10gBackup Enable/Disable 10G Mlt reliance backup mode.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.17
rcMltAggregatable Enable/Disable link aggregation on a MLT.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.18
rcMltClearLinkAggregate clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT.	Enumerationr/w Constraints: range: 1-128	.1.3.6.1.4.1.2272.1.17.10.1.19
rcMltNtStgEnable Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 noAction 2 install 3 uninstall Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.20
rcMltDesignatedPort Indicates the Designated port for the MLT.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.17.10.1.21
rcMltAggOperState Link aggregation state on a MLT.	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.22
rcMltAggTimeOfLastOperChange The time value since the interface entered its current operational state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.17.10.1.23
rcMltVplsMgmtVlan Management Vlan is configured on this mlt	EnableValuer/w Constraints: range: 1-479 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.24
rcMltLoadDistributionOption Used to specify the Load Balancing option for MLT in UNI	Enumerationr/w	.1.3.6.1.4.1.2272.1.17.10.1.25
rcMltUniAggrMacIdx Used to specify the index of the mac address pool reserved for MLT uni	Integer32r/w	.1.3.6.1.4.1.2272.1.17.10.1.26
rcMltUniAggrMacAddress Used to display the mac address reserved for this MLT	SNMPv2-TCMacAddress Enumerated Values: 1 tx 2 rx 3 both 4 rxFilter 5 txFilter 6 bothFilter Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.17.10.1.27
rcMltQinqEtherType The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it would be ignored	Integer32r/w	.1.3.6.1.4.1.2272.1.17.10.1.28
rcMltEgressCosProfileName Mlt Egress COS Profile Name, which is defined by rcCosProfileTable	OctetStringr/w	.1.3.6.1.4.1.2272.1.17.10.1.29
rcMltEgressPolicerAdminState Enable/disable Mlt Egress Policer	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.30
rcMltAggrEgressBandwidth Aggregated Egress Bandwidth Policer is used.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.31
rcMltAggrIngressBandwidth Aggregated Ingress Bandwidth Policer is used.	EnableValuer/w Constraints: range: 0-4094 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.32
rcMltAggrMacAlloc Aggregated Mac Allocation is used	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.33
rcMltAggMinLink If number of active links goes below configured minimum-link number, the entire LAG is declared down.	Integer32r/w Enumerated Values: 1 physicalPortLevel 2 serviceLevel	.1.3.6.1.4.1.2272.1.17.10.1.34
rcMltMtu MTU for ports in Mlt	Integer32r/w	.1.3.6.1.4.1.2272.1.17.10.1.35
rcMltInterfaceType This value indicates whether ports in the mlt are of type <normal/silent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is s…	Enumerationr/w	.1.3.6.1.4.1.2272.1.17.10.1.36
rcMltConfiguredMembers The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These port get added as ConfiguredMembers	PortSetr/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.17.10.1.37
rcMltMtuAdminState Set Mlt MTU enable or disable	EnableValuer/w Constraints: range: 0-512 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.38
rcMltPeerPortMembersdeprecated The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT. This object has been deprecated/obsolete by object rcMltPeerPortMembersList	PortSet Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.17.10.1.39
rcMltCpLimitPktRate Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.	Integer32r/w	.1.3.6.1.4.1.2272.1.17.10.1.40
rcMltCpLimitShutDownEnable Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded.	SNMPv2-TCTruthValuer/w Constraints: range: 2-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.41
rcMltVlanIdList This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.17.10.1.42
rcMltEntryOwner Defines the owner of the MLT.	Enumeration Enumerated Values: 1 chassis 2 slice	.1.3.6.1.4.1.2272.1.17.10.1.43
rcMltDatapathProgrammingState Defines the datapath programming state of the MLT.	Enumeration Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.17.10.1.44
rcMltL4Hash If enabled all the non fragmented L4 packets will take L4 hashing and all the fragmented L4 packets and L3 packets will take L3 hashing. If disabled then both L3 and L4 packets will take L3 hashing. It is introduce by r…	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.45
rcMltPrivateVlanType The mode used when private VLAN is associated with MLT. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or promiscuous. Setting the value to trunk …	Enumerationr/w Constraints: range: 0-5	.1.3.6.1.4.1.2272.1.17.10.1.46
rcMltBpduMode This object specifies the BPDU send/receive mode: send/receive BPDUs on all trunk ports (1) or on a single trunk port (2).	Enumerationr/w	.1.3.6.1.4.1.2272.1.17.10.1.47
rcMltPeerPortMembersList A list of peer ports in the display format slot/port,slot/port/sub-port. A port display format cannot be always hardcoded as slot/port. It depends on the dynamic setting of the port, such as channelized. This object is …	OctetString	.1.3.6.1.4.1.2272.1.17.10.1.48
rcMltFlexUniEnable Used to set FLEX UNI enable/disable on mlt	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.49

rcSltPortTable

table

.1.3.6.1.4.1.2272.1.17.12 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSltPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSltPortTable'

Copy

rcSltPortEntry row .1.3.6.1.4.1.2272.1.17.12.1

Entry containing configuration information for a
particular Multi-Link Trunk.

Indexes

No indexes recorded

Column	Syntax	OID
rcSltPortIfIndex An interface for this SLT.	InterfaceIndex Enumerated Values: 1 oneToTwo 2 twoToOne 3 both Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.17.12.1.1
rcSltPortSmltId A uniquely identifies the Single-Link Trunk associated with this entry.	Integer32r/w	.1.3.6.1.4.1.2272.1.17.12.1.2
rcSltPortOperType The current operate type of the port normal or smlt.	Enumeration	.1.3.6.1.4.1.2272.1.17.12.1.3
rcSltPortRowStatus Used to create/delete entries of the Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.12.1.4

rcMltVlacpTable

table

.1.3.6.1.4.1.2272.1.17.13 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMltVlacpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMltVlacpTable'

Copy

Mlt Virtual LACP table

rcMltVlacpEntry row .1.3.6.1.4.1.2272.1.17.13.1

Entry containing info. for a particular port

Indexes

rcDiagMacConvSteeringId

Column	Syntax	OID
rcMltVlacpAdminEnable Administratively enable/disable Virtual LACP on a MLT	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.13.1.1
rcMltVlacpFastPeriodicTimer The number of miliseconds between periodic transmissions using Short Timeouts	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.13.1.2
rcMltVlacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.13.1.3
rcMltVlacpEtherMacAddress Multicast Mac Address exclusively used for VLACPDU's	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.17.13.1.4
rcMltVlacpDualHomingEnable Enable/Disable Dual homing on Virtual LACP on a MLT	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.13.1.5

rcMltBvidPortTable

table

.1.3.6.1.4.1.2272.1.17.14 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMltBvidPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMltBvidPortTable'

Copy

Table contains Bridge Vlan configured information for 
Primary and Secondary ports for MLT-UNI

rcMltBvidPortEntry row .1.3.6.1.4.1.2272.1.17.14.1

Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI

Indexes

No indexes recorded

Column	Syntax	OID
rcMltBvidMltId VLAN ID of the Port List	Integer32	.1.3.6.1.4.1.2272.1.17.14.1.1
rcMltBvidVlanId VLAN ID of the Port List	Integer32	.1.3.6.1.4.1.2272.1.17.14.1.2
rcMltBvidPrimaryPort Primary port of the MLT for the VLAN when load distribution option is b-vid	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.17.14.1.3
rcMltBvidSecondaryPort Secondary port of the MLT for the VLAN when load distribution option is b-vid	InterfaceIndexr/w Enumerated Values: 1 cableLT50M 2 cable50M80M 3 cable80M110M 4 cable110M140M 5 cableGT140M 6 cableUnknown Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.17.14.1.4
rcMltBvidRowStatus Used to Add/delete entries in the table	SNMPv2-TCRowStatusr/w Enumerated Values: 1 phy100M 2 phy1000M 3 phy10000M 4 phy100000M 5 phyUnknown 6 bcm5464 7 bcm5464s Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.14.1.5

rcSyslogHostTbl

table

.1.3.6.1.4.1.2272.1.22.2 · 1 row entry · 25 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSyslogHostTbl

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSyslogHostTbl'

Copy

Table of remote host destinations for syslog.

rcSyslogHostEntry row .1.3.6.1.4.1.2272.1.22.2.1

Entry containing information for a particular
entry in rcSyslogHostTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcSyslogHostId Host Id.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.22.2.1.1
rcSyslogHostIpAddrdeprecated Host Ip Address	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 pairFail 2 pairNormal 3 pairOpen 4 pairShorted 5 pairNotApplicable 6 pairNotTested 7 pairForce 8 pinShort Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.22.2.1.2
rcSyslogHostUdpPort Specifies the UDP port to use to send syslog messages to the host.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.22.2.1.3
rcSyslogHostFacility Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7.	Enumerationr/w Enumerated Values: 1 pairFail 2 pairNormal 3 pairOpen 4 pairShorted 5 pairNotApplicable 6 pairNotTested 7 pairForce 8 pinShort	.1.3.6.1.4.1.2272.1.22.2.1.4
rcSyslogHostModuleId Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.22.2.1.5
rcSyslogHostModuleId2 Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 pairFail 2 pairNormal 3 pairOpen 4 pairShorted 5 pairNotApplicable 6 pairNotTested 7 pairForce 8 pinShort Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.22.2.1.6
rcSyslogHostSeverity Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'. Value is one of multiple (logical 'OR') of the following: info(1), warning(2), error(4), mfg(8)…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.22.2.1.7
rcSyslogHostMapInfoSeverity Specifies the syslog severity to use for Accelar INFO messages. Default is INFO.	Enumerationr/w	.1.3.6.1.4.1.2272.1.22.2.1.8
rcSyslogHostMapWarningSeverity Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO.	Enumerationr/w	.1.3.6.1.4.1.2272.1.22.2.1.9
rcSyslogHostMapErrorSeverity Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING.	Enumerationr/w Enumerated Values: 1 cat3 2 cat5	.1.3.6.1.4.1.2272.1.22.2.1.10
rcSyslogHostMapMfgSeverity Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.22.2.1.11
rcSyslogHostMapFatalSeverity Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR.	Enumerationr/w Enumerated Values: 1 inversed 2 normal 3 invalid	.1.3.6.1.4.1.2272.1.22.2.1.12
rcSyslogHostMapTraceMsg Specifies the syslog severity to use for syslog trace messages. Default is DEBUG.	Enumerationr/w Enumerated Values: 1 normal 2 swapped 3 invalid 4 error	.1.3.6.1.4.1.2272.1.22.2.1.13
rcSyslogHostMapTrapMsg Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO.	Enumerationr/w Constraints: range: -1-15	.1.3.6.1.4.1.2272.1.22.2.1.14
rcSyslogHostLogTraceMsgs Indicate whether to activate the host to log the syslog trace messages.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 inversed 2 normal 3 invalid Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.22.2.1.15
rcSyslogHostLogTrapMsgs Indicate whether to activate the host to log the syslog messages for SNMP traps.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 normal 2 swapped 3 invalid 4 error Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.22.2.1.16
rcSyslogHostEnable Enable/Disable messages to be sent to syslog host.	SNMPv2-TCTruthValuer/w Constraints: range: -1-15 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.22.2.1.17
rcSyslogHostRowStatus Used to create/delete entries in the rcSyslogTable.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 inversed 2 normal 3 invalid Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.22.2.1.18
rcSyslogHostAddressType Address Type of the Host.	INET-ADDRESS-MIBInetAddressTyper/w Enumerated Values: 1 normal 2 swapped 3 invalid 4 error	.1.3.6.1.4.1.2272.1.22.2.1.19
rcSyslogHostAddress Address of the Host.	INET-ADDRESS-MIBInetAddressr/w Constraints: range: -1-15	.1.3.6.1.4.1.2272.1.22.2.1.20
rcSyslogHostSecureForwardingEnable Enable/Disable Secure forwarding of Syslog for a particular host.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 inversed 2 normal 3 invalid Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.22.2.1.21
rcSyslogHostSecureForwardingSshProtect Enable/Disable Secure forwarding of Syslog over SSH remote port forwarding for particular host.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 normal 2 swapped 3 invalid 4 error Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.22.2.1.22
rcSyslogHostSecureForwardingTcpPort Specifies the tcp port to use for Secure forwarding of for particular host.	Integer32r/w Constraints: range: -1-15	.1.3.6.1.4.1.2272.1.22.2.1.23
rcSyslogHostSecureForwardingMode Enable/Disable Secure forwarding of Syslog over remote port forwarding for particular host.This object is used to obsolete the rcSyslogHostSecureForwardingEnable and rcSyslogHostSecureForwardingSshProtect. …	Enumerationr/w	.1.3.6.1.4.1.2272.1.22.2.1.24
rcSyslogHostSecureForwardingServerCertName Specifies the identity name of server certificate. It is used to match the subject name of the server certificate received during negotiation with this configured server cert name to allow negotiation	OctetStringr/w	.1.3.6.1.4.1.2272.1.22.2.1.25

rcSyslogRootCertificateTable

table

.1.3.6.1.4.1.2272.1.22.5 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSyslogRootCertificateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSyslogRootCertificateTable'

Copy

Table containing file-name and actio to be performed on the
serever root certificate

rcSyslogRootCertificateEntry row .1.3.6.1.4.1.2272.1.22.5.1

Entry containing name of the server root certificate and
the action to be performed on it

Indexes

No indexes recorded

Column	Syntax	OID
rcSyslogRootCertificateFilename Root certificate file of a Syslog Server to be installed or uninstalled. It requires object rcSyslogRootCertificate to be install or uninstall or none	OctetString Enumerated Values: 0 drop 1 capture 2 trigger-on 3 trigger-off	.1.3.6.1.4.1.2272.1.22.5.1.1
rcSyslogRootCertificateAction To install/uninstall Root certificate file of a Syslog Server. It requires the object rcSyslogGlobalSecureForwadingCertFilename with a valid certification file. it always return noAction for query	Enumerationr/w	.1.3.6.1.4.1.2272.1.22.5.1.2
rcSyslogRootCertificateRowStatus Used to create/delete entries in the rcSyslogRootCertificateTable.	SNMPv2-TCRowStatusr/w Constraints: range: 1-6 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.22.5.1.3

rcDiagMirrorByPortTable

table

.1.3.6.1.4.1.2272.1.23.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagMirrorByPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagMirrorByPortTable'

Copy

This table is used to configure the Mirror By
Port feature.  This feature allows the device
to forward a copy of each packet seen on a
particular port to a different port.

rcDiagMirrorByPortEntry row .1.3.6.1.4.1.2272.1.23.1.1

Entry containing mirror by port information.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagMirrorByPortId Entry id.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.2272.1.23.1.1.1
rcDiagMirrorByPortMirroredPortdeprecated Used to configure the 'mirrored' port. The port where packets are copied from.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.23.1.1.2
rcDiagMirrorByPortMirroringPortdeprecated Used to configure the 'mirroring' port. The port where packets are copied to.	InterfaceIndexr/w Constraints: range: 0-4092	.1.3.6.1.4.1.2272.1.23.1.1.3
rcDiagMirrorByPortMode Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received on the 'mirrored' port will be copied. 'both' means all tra…	Enumerationr/w Constraints: range: 0-4092	.1.3.6.1.4.1.2272.1.23.1.1.4
rcDiagMirrorByPortEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.1.1.5
rcDiagMirrorByPortRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-7 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.1.1.6
rcDiagMirrorByPortOctapidIdobsolete Octapid Id for a port.	SNMPv2-SMIInteger32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.23.1.1.7
rcDiagMirrorByPortPid Pid for a port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.1.1.8
rcDiagMirrorRemoteMirrorVlanId vlan-id to which mirrored packets needs to be send for remote mirroring. If set, this vlan id is used in mirror tag of the remote mirrored packet	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.23.1.1.9
rcDiagMirrorByPortSpEncap disable/enable service provide encapsulation. If this attribute is true the mirrored packets contains the service provider encapsulation, OEL2 and Mac-in-Mac encapsulation are supported.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.1.1.10
rcDiagMirrorByPortGranularity Used to configure the 'granularity' of the mirror operation physicalPort means all traffic ingressing or egressing out of the mirrored port shall be copied to the mirroring port. services means all traffic ingressing or…	Enumerationr/w	.1.3.6.1.4.1.2272.1.23.1.1.11
rcDiagMirrorByPortMirroredPortList Used to configure the 'mirrored' port. The port where packets are copied from.	PortSetr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.23.1.1.12
rcDiagMirrorByPortMirroringPortList Used to configure the 'mirroring' port. The port where packets are copied from.	PortSetr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.23.1.1.13
rcDiagMirrorMirroringVlanId Destination is a VLAN.	Integer32r/w	.1.3.6.1.4.1.2272.1.23.1.1.14
rcDiagMirrorMirroringMltId Destination is an MLT.	Integer32r/w	.1.3.6.1.4.1.2272.1.23.1.1.15
rcDiagMirrorMirroringMgId Contains information about the MGID allocated.	Integer32	.1.3.6.1.4.1.2272.1.23.1.1.16
rcDiagMirrorMirroringIpAddr Destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.23.1.1.17
rcDiagMirrorMirroringIpTtl Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl.	Integer32r/w	.1.3.6.1.4.1.2272.1.23.1.1.18
rcDiagMirrorMirroringIpDscp Dscp value for mirrored packets when mirror destination is IP. If other than default, the encapsulated packet will have the given Dscp value.	Integer32r/w	.1.3.6.1.4.1.2272.1.23.1.1.19
rcDiagMirrorByPortScope Used to configure the port mirroring scope. Chassis is the default option which allows mirroring among ports from different slots. Slice option requires both mirroring and mirrored ports to be within the same slice. Sco…	Enumerationr/w	.1.3.6.1.4.1.2272.1.23.1.1.20
rcDiagMirrorMonitoringIsidOffset Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.23.1.1.21
rcDiagMirrorMonitoringIsid Actual monitor I-SID value in which packets are mirrored to.	SNMPv2-SMIInteger32 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.23.1.1.22
rcDiagMirrorMirroringQos Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID.	Integer32r/w	.1.3.6.1.4.1.2272.1.23.1.1.23

rcDiagPortConvSteeringTable

table

.1.3.6.1.4.1.2272.1.23.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagPortConvSteeringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagPortConvSteeringTable'

Copy

Diag Port Conv Steering Table

rcDiagPortConvSteeringEntry row .1.3.6.1.4.1.2272.1.23.2.1

Entry containing information of Diag Port Conv Steering.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagPortConvSteeringId Entry id.	Integer32	.1.3.6.1.4.1.2272.1.23.2.1.1
rcDiagPortConvSteeringPortOne IfIndex for port one	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.2.1.2
rcDiagPortConvSteeringPortTwo IfIndex for port two	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.2.1.3
rcDiagPortConvSteeringMode Used to specify the traffic flow that should be captured between ports one and two.	Enumerationr/w Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.23.2.1.4
rcDiagPortConvSteeringForwardPort IfIndex of the port where captured traffic should be forwarded to.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.23.2.1.5
rcDiagPortConvSteeringEnable Enable this entry.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.2.1.6
rcDiagPortConvSteeringRowStatus Used to create/delete entries in the rcDiagMirrorByPortTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.2.1.7

rcDiagMacConvSteeringTable

table

.1.3.6.1.4.1.2272.1.23.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagMacConvSteeringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagMacConvSteeringTable'

Copy

Diag Mac Conv Steering Table

rcDiagMacConvSteeringEntry row .1.3.6.1.4.1.2272.1.23.3.1

Entry containing information of Diag Mac Conv Steering.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagMacConvSteeringId Entry id.	Integer32	.1.3.6.1.4.1.2272.1.23.3.1.1
rcDiagMacConvSteeringSrcMac Source MAC address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.23.3.1.2
rcDiagMacConvSteeringDstMac Destination MAC address	SNMPv2-TCMacAddressr/w Constraints: range: 0-50 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.23.3.1.3
rcDiagMacConvSteeringInPort IfIndex of ingress port.	SNMPv2-SMIInteger32r/w Constraints: range: 0-9600	.1.3.6.1.4.1.2272.1.23.3.1.4
rcDiagMacConvSteeringForwardPort IfIndex of the port where captured traffic should be forwarded to.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.3.1.5
rcDiagMacConvSteeringEnable Enable this entry.	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.3.1.6
rcDiagMacConvSteeringRowStatus Used to create/delete entries in the rcDiagMirrorByPortTable.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.3.1.7

rcDiagVctTable

table

.1.3.6.1.4.1.2272.1.23.4 · 1 row entry · 28 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagVctTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagVctTable'

Copy

Diag Vct Table

rcDiagVctEntry row .1.3.6.1.4.1.2272.1.23.4.1

Entry containing cable infomation and test result.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagVctIfIndex Port IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.23.4.1.1
rcDiagVctNormalCableLength Cable length, this indicates a range in which the actual length falls.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.2
rcDiagVctPhyType Phy type, 100MHz throught 1 GHz, or broadcom phy.	Enumeration Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.23.4.1.3
rcDiagVctCableStatus Status of the cable as a whole. The status of a cable is in a sense, a summation of the status of its pairs. If all the pairs are normal, then the cable is normal. If the cable consists of zero or more normal pairs a…	Enumeration Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.23.4.1.4
rcDiagVctPair1Status The status of a single pair in the cable	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.5
rcDiagVctPair1ErrLength Error Pair Length, in meters, measured by Time Domain Reflectometry.	Integer32	.1.3.6.1.4.1.2272.1.23.4.1.6
rcDiagVctPair2Status The status of a single pair in the cable	Enumeration Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.23.4.1.7
rcDiagVctPair2ErrLength Error Pair Length, in meters, measured by Time Domain Reflectometry.	Integer32 Constraints: range: 0-4093	.1.3.6.1.4.1.2272.1.23.4.1.8
rcDiagVctPair3Status The status of a single pair in the cable	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.9
rcDiagVctPair3ErrLength Error Pair Length, in meters, measured by Time Domain Reflectometry.	Integer32	.1.3.6.1.4.1.2272.1.23.4.1.10
rcDiagVctPair4Status The status of a single pair in the cable	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.11
rcDiagVctPair4ErrLength Error Pair Length, in meters, measured by Time Domain Reflectometry.	Integer32	.1.3.6.1.4.1.2272.1.23.4.1.12
rcDiagVctStartTest Start VCT test, Set this object to TRUE to perform a VCT test on the current port. A get on this object produces an undefines value.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.4.1.13
rcDiagVctTestDone When a VCT test is started setting rcDiagVctStartTest, this object is immediately set to FALSE by the switch software. It remain FALSE until the test is completed, when it is set to TRUE. When this object is TRUE, then …	SNMPv2-TCTruthValue Constraints: range: 1-1000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.4.1.14
rcDiagVctCableCategory Cable type: CAT3 or CAT5.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.15
rcDiagVctCableLength Length of cable in meters based on average electrical length of 4 pairs. Measurement can be done when traffic is live or not.	MetersInteger32	.1.3.6.1.4.1.2272.1.23.4.1.16
rcDiagVctPair1Polarity The polarity of a single pair in the cable.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.17
rcDiagVctPair1Swap The pair swap in the cable.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.18
rcDiagVctPair1Skew Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.	Integer32	.1.3.6.1.4.1.2272.1.23.4.1.19
rcDiagVctPair2Polarity The polarity of a single pair in the cable.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.20
rcDiagVctPair2Swap The pair swap in the cable.	Enumeration Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.4.1.21
rcDiagVctPair2Skew Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.	Integer32 Enumerated Values: 0 none 1 ethernetii 2 snap 3 llc 4 raw	.1.3.6.1.4.1.2272.1.23.4.1.22
rcDiagVctPair3Polarity The polarity of a single pair in the cable.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.23
rcDiagVctPair3Swap The pair swap in the cable.	Enumeration Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.23.4.1.24
rcDiagVctPair3Skew Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.	Integer32	.1.3.6.1.4.1.2272.1.23.4.1.25
rcDiagVctPair4Polarity The polarity of a single pair in the cable.	Enumeration	.1.3.6.1.4.1.2272.1.23.4.1.26
rcDiagVctPair4Swap The pair swap in the cable.	Enumeration Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.23.4.1.27
rcDiagVctPair4Skew Differential cable pair length in meters. Skew measurement can only be performed when cable gigabit link is up regardless of traffic activity. A value of -1 means an error occured when trying to get the length.	Integer32 Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.4.1.28

rcDiagPcapFilterTable

table

.1.3.6.1.4.1.2272.1.23.15.11 · 1 row entry · 33 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagPcapFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagPcapFilterTable'

Copy

A table used to store pcap secondary filters

rcDiagPcapFilterEntry row .1.3.6.1.4.1.2272.1.23.15.11.1

Pcap secondary filter desc

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagPcapFilterId Unique ID that represents the filter	Integer32	.1.3.6.1.4.1.2272.1.23.15.11.1.1
rcDiagPcapFilterEnable Filter is enabled or not	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.23.15.11.1.2
rcDiagPcapFilterAction Action to be takesn when policy is matched	Enumerationr/w	.1.3.6.1.4.1.2272.1.23.15.11.1.3
rcDiagPcapFilterSrcMac Soruce mac address to match	SNMPv2-TCMacAddressr/w Constraints: range: 0-2147483647 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.23.15.11.1.4
rcDiagPcapFilterSrcMask Soruce mac address mask. Used to specify a range	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.23.15.11.1.5
rcDiagPcapFilterIsInverseSrcMac Soruce mac address Inverse. when set the mac addresses otherthan specified is matched	SNMPv2-TCTruthValuer/w Constraints: range: 0-47 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.6
rcDiagPcapFilterDstMac Destination mac address	SNMPv2-TCMacAddressr/w Constraints: range: 0-15 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.23.15.11.1.7
rcDiagPcapFilterDstMask Destination mac address mask. Used to specify a range	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.11.1.8
rcDiagPcapFilterIsInverseDstMac Destination mac address Inverse. when set the mac addresses otherthan specified is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.9
rcDiagPcapFilterVlanId Vlan-id of the packet to be matched	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.11.1.10
rcDiagPcapFilterToVlanId To Vlan-id. Used to specify a range	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.23.15.11.1.11
rcDiagPcapFilterIsInverseVlanId Vlan-Id Inverse. when set the Vlan-Id otherthan specified range is matched	SNMPv2-TCTruthValuer/w Constraints: range: 1-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.12
rcDiagPcapFilterPbit pBit of the packet to be matched	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.23.15.11.1.13
rcDiagPcapFilterToPbit To pBit. Used to specify a range	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.11.1.14
rcDiagPcapFilterIsInversePbit pBit Inverse. when set the pBit otherthan specified range is matched	SNMPv2-TCTruthValuer/w Enumerated Values: 1 permit 2 deny Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.15
rcDiagPcapFilterEtherType EtherType of the packet to be matched	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.23.15.11.1.16
rcDiagPcapFilterToEtherType To EtherType. Used to specify a range	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.11.1.17
rcDiagPcapFilterIsInverseEtherType EtherType Inverse. when set the EtherType otherthan specified range is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.18
rcDiagPcapFilterProtocolType ProtocolType of the packet to be matched	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.23.15.11.1.19
rcDiagPcapFilterToProtocolType To ProtocolType. Used to specify a range	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.23.15.11.1.20
rcDiagPcapFilterIsInverseProtocolType ProtocolType Inverse. when set the ProtocolType otherthan specified range is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.21
rcDiagPcapFilterSrcIp Source IP address of the packet to be matched	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.23.15.11.1.22
rcDiagPcapFilterToSrcIp To Source IP address. Used to specify a range	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.23.15.11.1.23
rcDiagPcapFilterIsInverseSrcIp Source IP address Inverse. when set the source IP otherthan specified range is matched	SNMPv2-TCTruthValuer/w Constraints: range: 4-4 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.24
rcDiagPcapFilterDstIp Destination IP address of the packet to be matched	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.23.15.11.1.25
rcDiagPcapFilterToDstIp To Destination IP address. Used to specify a range	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.23.15.11.1.26
rcDiagPcapFilterIsInverseDstIp Destination IP address Inverse. when set the Destination IP otherthan specified is range matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.27
rcDiagPcapFilterDscp DSCP value of the packet to be matched	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.11.1.28
rcDiagPcapFilterToDscp To DSCP. Used to specify a range	Integer32r/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.15.11.1.29
rcDiagPcapFilterIsInverseDscp DSCP Inverse. when set the DSCP otherthan specified range is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.30
rcDiagPcapFilterRowStatus Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.15.11.1.31
rcDiagPcapFilterDscpMatchZero When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be default it would be set to FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.32
rcDiagPcapFilterPbitMatchZero When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be default it would be set to FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.11.1.33

rcDiagPcapAdvancedFilterTable

table

.1.3.6.1.4.1.2272.1.23.15.13 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagPcapAdvancedFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagPcapAdvancedFilterTable'

Copy

A table used to store pcap secondary filters

rcDiagPcapAdvancedFilterEntry row .1.3.6.1.4.1.2272.1.23.15.13.1

Pcap secondary Advanced filter desc

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagPcapAdvancedFilterId Unique ID that represents the filter	Integer32	.1.3.6.1.4.1.2272.1.23.15.13.1.1
rcDiagPcapAdvancedFilterUdpPort UdpPort of the packet to be matched	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.2
rcDiagPcapAdvancedFilterToUdpPort To UdpPort. Used to specify a range	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.3
rcDiagPcapAdvancedFilterIsInverseUdpPort UdpPort Inverse. when set the UdpPort otherthan specified range is matched	SNMPv2-TCTruthValuer/w Constraints: range: 4-4 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.13.1.4
rcDiagPcapAdvancedFilterTcpPort TcpPort of the packet to be matched	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.5
rcDiagPcapAdvancedFilterToTcpPort To TcpPort. Used to specify a range	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.6
rcDiagPcapAdvancedFilterIsInverseTcpPort TcpPort Inverse. when set the TcpPort otherthan specified range is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.13.1.7
rcDiagPcapAdvancedFilterUserDefinedData User defined data to match with the packets received	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.23.15.13.1.8
rcDiagPcapAdvancedFilterUserDefinedDataSize Length of user defined data	Integer32r/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.15.13.1.9
rcDiagPcapAdvancedFilterUserDefinedOffset Offset from which match has to start	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.10
rcDiagPcapAdvancedFilterIsInverseUserDefined TcpPort Inverse. when set the Userdata otherthan specified is matched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.15.13.1.11
rcDiagPcapAdvancedFilterTimer Timer to start the pcap capture window in ms	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.12
rcDiagPcapAdvancedFilterPacketCount Number of packets to be captured before disabling pcap	Integer32r/w	.1.3.6.1.4.1.2272.1.23.15.13.1.13
rcDiagPcapAdvancedFilterRefreshTimer Refresh timer in ms	Integer32r/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.15.13.1.14
rcDiagPcapAdvancedFilterRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.15.13.1.15

rcDiagMonitorByIsidTable

table

.1.3.6.1.4.1.2272.1.23.18 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagMonitorByIsidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagMonitorByIsidTable'

Copy

This table is used to configure the Monitor By
Isid feature.  This feature allows the device
to analyze the packets which got mirrored into isid.

rcDiagMonitorByIsidEntry row .1.3.6.1.4.1.2272.1.23.18.1

Entry containing monitor by isid information.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagMonitorByIsidIndex Entry id.	Integer32	.1.3.6.1.4.1.2272.1.23.18.1.1
rcDiagMonitorByIsidMonitorIsidOffset Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.23.18.1.2
rcDiagMonitorByIsidMonitorIsid Actual monitor I-SID value in which packets are mirrored to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.18.1.3
rcDiagMonitorByIsidEgressPortList Egress ports to which traffic analyzers are connected.	PortSetr/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.23.18.1.4
rcDiagMonitorByIsidEgressMltId Egress MLT id to which traffic analyzers are connected.	Integer32r/w Enumerated Values: 0 none 1 ethernetii 2 snap 3 llc 4 raw	.1.3.6.1.4.1.2272.1.23.18.1.5
rcDiagMonitorByIsidMapToVlanId VLAN id to map with mirrored traffic on the monitoring node.	Integer32r/w Constraints: range: 0-507	.1.3.6.1.4.1.2272.1.23.18.1.6
rcDiagMonitorByIsidNickname Nickname of the BEB from which user wants to analyze the traffic.	r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.23.18.1.7
rcDiagMonitorByIsidEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.18.1.8
rcDiagMonitorByIsidRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.23.18.1.9

rcDiagIsidMirroringStatsTable

table

.1.3.6.1.4.1.2272.1.23.19 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDiagIsidMirroringStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDiagIsidMirroringStatsTable'

Copy

This table is used to show/clear
number of packets which got mirrored into isid.

rcDiagIsidMirroringStatsEntry row .1.3.6.1.4.1.2272.1.23.19.1

Entry containing isid mirroring stats information.

Indexes

No indexes recorded

Column	Syntax	OID
rcDiagIsidMirroringStatsIndex Offset id value which is mapped to actual monitor I-SID value.	Integer32	.1.3.6.1.4.1.2272.1.23.19.1.1
rcDiagIsidMirroringStatsMonitorIsid Actual monitor I-SID value in which packets are mirrored to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.23.19.1.2
rcDiagIsidMirroringStatsMirroredPackets Number of packets mirrored into ISID on the mirroring BEB.	SNMPv2-SMICounter32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.23.19.1.3
rcDiagIsidMirroringStatsClearStats Used to clear the ISID mirroring statistics.	SNMPv2-TCTruthValuer/w Constraints: range: 0-3600 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.23.19.1.4

rcIpxAddrTable

table

.1.3.6.1.4.1.2272.1.24.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxAddrTable'

Copy

The table of addressing information relevant to
this entity's IPX addresses.  This table is used
for associating IfIndex and IPX network number.

rcIpxAddrEntry row .1.3.6.1.4.1.2272.1.24.2.1

The addressing information for one of this
entity's IP addresses.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxAddrVlanId The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	RcVlanIdOrNoner/w Enumerated Values: 1 up 2 down Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.24.2.1.1
rcIpxAddrNetAddr IPX Network address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.2.1.2
rcIpxAddrEncap Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it.	Enumerationr/w	.1.3.6.1.4.1.2272.1.24.2.1.3
rcIpxAddrEntryStatus Used to create/delete entries in the rcIpxAddrEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.2.1.4
rcIpxAddrTicks The tick value gets updated to the routing table when an ipx address is being assigned to a vlan.	Integer32r/w	.1.3.6.1.4.1.2272.1.24.2.1.5

rcIpxPolicyNetTable

table

.1.3.6.1.4.1.2272.1.24.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxPolicyNetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxPolicyNetTable'

Copy

Net Table is used to store the IPX
network address range. This entry is
used for Net List Table.

rcIpxPolicyNetEntry row .1.3.6.1.4.1.2272.1.24.4.1

table entry.

Indexes

rcIpxRsmltPeerVlanId

Column	Syntax	OID
rcIpxPolicyNetId Unique ID to represent the entry in the table.	Integer32r/w Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.24.4.1.1
rcIpxPolicyNetFromNet IPX Network Address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.4.1.2
rcIpxPolicyNetToNet This is used to specify a range of IPX network addresses. This is an optional parameter. The default value is NetAddr. In that case the entry refers to a single IPX network.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.4.1.3
rcIpxPolicyNetName Unique Name to represent the entry in the table. Id & Name have one-to-one relationship.	OctetStringr/w Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.24.4.1.4
rcIpxPolicyNetRowStatus .	SNMPv2-TCRowStatusr/w Constraints: range: 0-3600 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.4.1.5

rcIpxPolicyServTable

table

.1.3.6.1.4.1.2272.1.24.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxPolicyServTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxPolicyServTable'

Copy

Service Table is used to store Service Type
and Service Name. This is used only for SAP Updates.

rcIpxPolicyServEntry row .1.3.6.1.4.1.2272.1.24.6.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxPolicyServId Used to store the service Id.	Integer32 Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.24.6.1.1
rcIpxPolicyServServiceType Used to store the service type.	Integer32	.1.3.6.1.4.1.2272.1.24.6.1.2
rcIpxPolicyServServiceName Used to store the service Name. This is an optional parameter. If not entered, '*' is taken as default value. This is matched to any service name. Also, '*' can be used to match wildcard characters. This is supported on…	OctetString	.1.3.6.1.4.1.2272.1.24.6.1.3
rcIpxPolicyServName Used to store the entry name. Id & Name have one-to-one relationship.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.6.1.4
rcIpxPolicyServRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.6.1.5

rcIpxPolicyListTable

table

.1.3.6.1.4.1.2272.1.24.8 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxPolicyListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxPolicyListTable'

Copy

PolicyList Table is used to store generic policies
that can be used by both RIP and SAP as their in/out policies.

rcIpxPolicyListEntry row .1.3.6.1.4.1.2272.1.24.8.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxPolicyListId Index used to uniquely Identify a group of policies in the route policy table.	Integer32 Enumerated Values: 1 open 2 close	.1.3.6.1.4.1.2272.1.24.8.1.1
rcIpxPolicyListSeqnum Second Index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action. Also used to resolve the tie between 2 ma…	Integer32 Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.24.8.1.2
rcIpxPolicyListName Is used to group a set of policies with different sequence number. Id & Name have one-to-one relationship Different policy groups can have same sequence number, whereas with in a group the sequence must be different.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.24.8.1.3
rcIpxPolicyListEnable value specified here indicates whether the policy is enabled or not. If disabled, the policy should not be used.	SNMPv2-TCTruthValuer/w Enumerated Values: 0 none 2 rip Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.24.8.1.4
rcIpxPolicyListAction This determines what to do with the RIP/SAP packet. If the value is 'permit', then only in or out the packet. Otherwise, drop the packet.	Enumerationr/w	.1.3.6.1.4.1.2272.1.24.8.1.5
rcIpxPolicyListRouteSource Used to specify the Route Source of the route Packet. This field is used only for announce policies. For accept policies, this field is ignored. Value is one of multiple (logical 'OR') of following values: direct(1), …	Integer32r/w	.1.3.6.1.4.1.2272.1.24.8.1.6
rcIpxPolicyListMatchNetList List of networks to which this policy is applied. The Network List Name is entered. When this is not referring to any list or the Net List Table to which it is pointing to is empty, then THIS POLICY MATCHES ALL NETWORK …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.8.1.7
rcIpxPolicyListMatchServList List of service types and Service Names to which this policy is applied. The Service List name is entered. This field is used only for SAP out/in policies. For, RIP policies, this field is discarded. When this is not re…	SNMPv2-TCDisplayStringr/w Enumerated Values: 1 sonet 2 sdh Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.8.1.8
rcIpxPolicyListHops This value is used as Hop count for out policies. If this field is 0, then Hop count is not modified. The default value is '0'. This field is also applicable only for Out Policies.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.24.8.1.9
rcIpxPolicyListTicks The tick value which will be updated for RIP when the routing method is tick.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.24.8.1.10
rcIpxPolicyListRowStatus .	SNMPv2-TCRowStatusr/w Constraints: range: 1-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.8.1.11

rcIpxRipOutFilterTable

table

.1.3.6.1.4.1.2272.1.24.10 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxRipOutFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxRipOutFilterTable'

Copy

RipOutFilter Table is used to store generic policies
that can be used by both RIP and SAP as their in/out policies.

rcIpxRipOutFilterEntry row .1.3.6.1.4.1.2272.1.24.10.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxRipOutFilterInterface IPX Network address. The interface to which the policy is applied.	OctetStringr/w Enumerated Values: 1 line 2 internal	.1.3.6.1.4.1.2272.1.24.10.1.1
rcIpxRipOutFilterPolicyName The name of the policy group to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.10.1.2
rcIpxRipOutFilterRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.10.1.3

rcIpxSapOutFilterTable

table

.1.3.6.1.4.1.2272.1.24.12 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxSapOutFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxSapOutFilterTable'

Copy

SapOutFilter Table is used to store generic policies
that can be used by both RIP and SAP as their in/out policies.

rcIpxSapOutFilterEntry row .1.3.6.1.4.1.2272.1.24.12.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxSapOutFilterInterface IPX Network address. The interface to which the policy is applied.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.12.1.1
rcIpxSapOutFilterPolicyName The name of the policy group to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.12.1.2
rcIpxSapOutFilterRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.12.1.3

rcIpxRipInFilterTable

table

.1.3.6.1.4.1.2272.1.24.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxRipInFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxRipInFilterTable'

Copy

RipInFilter Table is used to store generic policies
that can be used by both RIP and SAP as their in/out policies.

rcIpxRipInFilterEntry row .1.3.6.1.4.1.2272.1.24.14.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxRipInFilterInterface IPX Network address. The interface to which the policy is applied.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.14.1.1
rcIpxRipInFilterPolicyName The name of the policy group to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.14.1.2
rcIpxRipInFilterRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.14.1.3

rcIpxSapInFilterTable

table

.1.3.6.1.4.1.2272.1.24.16 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxSapInFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxSapInFilterTable'

Copy

SapInFilter Table is used to store generic policies
that can be used by both RIP and SAP as their in/out policies.

rcIpxSapInFilterEntry row .1.3.6.1.4.1.2272.1.24.16.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxSapInFilterInterface IPX Network address. The interface to which the policy is applied.	OctetStringr/w	.1.3.6.1.4.1.2272.1.24.16.1.1
rcIpxSapInFilterPolicyName The name of the policy group to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.16.1.2
rcIpxSapInFilterRowStatus .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.16.1.3

rcIpxSapInterfaceTable

table

.1.3.6.1.4.1.2272.1.24.18 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxSapInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxSapInterfaceTable'

Copy

SapInterface Table is used to store generic policies
that can be used by SAP as their in/out policies.

rcIpxSapInterfaceEntry row .1.3.6.1.4.1.2272.1.24.18.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxSapInterfaceNetNum IPX Network address. The interface to which the policy is applied.	OctetString	.1.3.6.1.4.1.2272.1.24.18.1.1
rcIpxSapInterfaceInPolicy The name of the in filter group to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.18.1.2
rcIpxSapInterfaceOutPolicy The name of the out filter to which this entry refers.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.18.1.3

rcIpxRipInterfaceTable

table

.1.3.6.1.4.1.2272.1.24.19 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxRipInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxRipInterfaceTable'

Copy

RipInterface Table is used to store generic policies
that can be used by RIP as their in/out policies.

rcIpxRipInterfaceEntry row .1.3.6.1.4.1.2272.1.24.19.1

table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxRipInterfaceNetNum IPX Network address. The interface to which the policy is applied.	OctetString	.1.3.6.1.4.1.2272.1.24.19.1.1
rcIpxRipInterfaceInPolicy The name of the in filter group to which this entry refers.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-60 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.19.1.2
rcIpxRipInterfaceOutPolicy The name of the out filter to which this entry refers.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-100 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.24.19.1.3

rcIpxBrouterTable

table

.1.3.6.1.4.1.2272.1.24.20 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxBrouterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxBrouterTable'

Copy

The table of addressing information relevant to
this entity's IPX addresses.  This table is used
for associating IfIndex and IPX network number.

rcIpxBrouterEntry row .1.3.6.1.4.1.2272.1.24.20.1

The addressing information for one of this
entity's IP addresses.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxBrouterPortIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32	.1.3.6.1.4.1.2272.1.24.20.1.1
rcIpxBrouterVlanId The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the sam2 value of ifIndex.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.24.20.1.2
rcIpxBrouterNetAddr IPX Network address.	OctetString	.1.3.6.1.4.1.2272.1.24.20.1.3
rcIpxBrouterEncap Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it.	Enumeration	.1.3.6.1.4.1.2272.1.24.20.1.4
rcIpxBrouterMacOffset IPX Network address.	Integer32r/w	.1.3.6.1.4.1.2272.1.24.20.1.5
rcIpxBrouterTicks The tick value gets updated to the routing table when an ipx address is being assigned to a vlan.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.24.20.1.6
rcIpxBrouterRowStatus Used to create/delete entries in the rcIpxBrouterEntry.	SNMPv2-TCRowStatusr/w Enumerated Values: 0 other 1 reset Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.20.1.7

rcIpxRsmltOperTable

table

.1.3.6.1.4.1.2272.1.24.21.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxRsmltOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxRsmltOperTable'

Copy

Route Smlt Table

rcIpxRsmltOperEntry row .1.3.6.1.4.1.2272.1.24.21.2.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxRsmltOperVlanId Vlan id.	Integer32	.1.3.6.1.4.1.2272.1.24.21.2.1.1
rcIpxRsmltOperIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.24.21.2.1.2
rcIpxRsmltOperAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.24.21.2.1.3
rcIpxRsmltOperHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w	.1.3.6.1.4.1.2272.1.24.21.2.1.4
rcIpxRsmltOperHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32	.1.3.6.1.4.1.2272.1.24.21.2.1.5
rcIpxRsmltOperHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w	.1.3.6.1.4.1.2272.1.24.21.2.1.6
rcIpxRsmltOperHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32	.1.3.6.1.4.1.2272.1.24.21.2.1.7
rcIpxRsmltOperOperStatus The operation status of Rsmlt, up or down.	Enumeration	.1.3.6.1.4.1.2272.1.24.21.2.1.8
rcIpxRsmltOperSmltId The id range for SMLT is 1-32.	IdList	.1.3.6.1.4.1.2272.1.24.21.2.1.9
rcIpxRsmltOperSltId The id range for SLT is 1-512.	IdList Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.24.21.2.1.10
rcIpxRsmltOperRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.24.21.2.1.11
rcIpxRsmltOperMacAddr Mac Address.	SNMPv2-TCMacAddress Constraints: range: 1-10 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.24.21.2.1.12

rcIpxRsmltPeerTable

table

.1.3.6.1.4.1.2272.1.24.21.3 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpxRsmltPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpxRsmltPeerTable'

Copy

Route Smlt Table

rcIpxRsmltPeerEntry row .1.3.6.1.4.1.2272.1.24.21.3.1

An entry of Ip As Path Access List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpxRsmltPeerVlanId Vlan id.	Integer32 Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.24.21.3.1.1
rcIpxRsmltPeerIfIndex Route Smlt Oper IfIndex.	InterfaceIndex Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.24.21.3.1.2
rcIpxRsmltPeerAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.24.21.3.1.3
rcIpxRsmltPeerHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32	.1.3.6.1.4.1.2272.1.24.21.3.1.4
rcIpxRsmltPeerHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32	.1.3.6.1.4.1.2272.1.24.21.3.1.5
rcIpxRsmltPeerHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32	.1.3.6.1.4.1.2272.1.24.21.3.1.6
rcIpxRsmltPeerHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32	.1.3.6.1.4.1.2272.1.24.21.3.1.7
rcIpxRsmltPeerOperStatus The operation status of Rsmlt, up or down.	Enumeration	.1.3.6.1.4.1.2272.1.24.21.3.1.8
rcIpxRsmltPeerSmltId The id range for SMLT is 1-32.	IdList	.1.3.6.1.4.1.2272.1.24.21.3.1.9
rcIpxRsmltPeerSltId The id range for SLT is 1-512.	IdList	.1.3.6.1.4.1.2272.1.24.21.3.1.10
rcIpxRsmltPeerMacAddr Mac Address.	SNMPv2-TCMacAddress Constraints: range: 1-65536 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.24.21.3.1.11

rcPosPppIpxTable

table

.1.3.6.1.4.1.2272.1.26.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosPppIpxTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosPppIpxTable'

Copy

rcPosPppIpxEntry row .1.3.6.1.4.1.2272.1.26.1.1

Indexes

No indexes recorded

Column	Syntax	OID
rcPosPppIpxIfIndex port number.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.26.1.1.1
rcPosPppIpxIpxcpAdminStatus	Enumerationr/w	.1.3.6.1.4.1.2272.1.26.1.1.2
rcPosPppIpxOperStatus	Enumeration	.1.3.6.1.4.1.2272.1.26.1.1.3
rcPosPppIpxNetAddr IPX Network address.	OctetStringr/w	.1.3.6.1.4.1.2272.1.26.1.1.4
rcPosPppIpxRoutingProtocol	Enumerationr/w	.1.3.6.1.4.1.2272.1.26.1.1.5

rcPosSonetTable

table

.1.3.6.1.4.1.2272.1.26.2 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosSonetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosSonetTable'

Copy

rcPosSonetEntry row .1.3.6.1.4.1.2272.1.26.2.1

Indexes

No indexes recorded

Column	Syntax	OID
rcPosSonetIndex pos ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.26.2.1.1
rcPosSonetFraming	Enumerationr/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.26.2.1.2
rcPosSonetSectionTrace config. J0 byte	Integer32r/w	.1.3.6.1.4.1.2272.1.26.2.1.3
rcPosSonetSectionGrowth config. Z0 byte	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.26.2.1.4
rcPosSonetSyncronization config. S1 byte	Integer32r/w	.1.3.6.1.4.1.2272.1.26.2.1.5
rcPosSonetStsPathTrace config. 64/16 byte.	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.2272.1.26.2.1.6
rcPosSonetPathSignalLabel config. C2 byte	Integer32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.26.2.1.7
rcPosSonetClockSource	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.26.2.1.8
rcPosSonetScramble	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.26.2.1.9
rcPosSonetOperStatusFraming	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.2.1.10
rcPosSonetOperStatusClockSource	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.2.1.11
rcPosSonetOperStatusScramble	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.26.2.1.12
rcPosSonetOperStatusSectionTrace	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.2.1.13
rcPosSonetOperStatusPathSignalLabel	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.2.1.14

rcPosLineStatusTable

table

.1.3.6.1.4.1.2272.1.26.3 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosLineStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosLineStatusTable'

Copy

Pos Line Status Table

rcPosLineStatusEntry row .1.3.6.1.4.1.2272.1.26.3.1

Entry containing information of Pos Line Status.

Indexes

No indexes recorded

Column	Syntax	OID
rcPosLineStatusIndex pos ifIndex, same as rcPosPppIpxIfIndex.	InterfaceIndex Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.26.3.1.1
rcPosLineStatusLocalMACAddress current local MAC address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.3.1.2
rcPosLineStatusRemoteMACAddress current remote MAC address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.3.1.3
rcPosLineStatusLocalIpAddr current local ip addr	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.26.3.1.4
rcPosLineStatusRemoteIpAddr current remote ip addr	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.26.3.1.5
rcPosLineStatusOutQuality current output quality.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.3.1.6
rcPosLineStatusLocalPeriod	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.3.1.7
rcPosLineStatusDeviceType	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.3.1.8
rcPosLineStatusDeviceRev	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.3.1.9
rcPosLineStatusIpxRoutingProtocol	SNMPv2-SMIInteger32 Enumerated Values: 1 cli 2 igap 3 snmp 4 eap 5 web Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.3.1.10

rcPosLineConfigTable

table

.1.3.6.1.4.1.2272.1.26.4 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosLineConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosLineConfigTable'

Copy

Pos Line Config Table

rcPosLineConfigEntry row .1.3.6.1.4.1.2272.1.26.4.1

Entry containing information of Pos Line Config.

Indexes

No indexes recorded

Column	Syntax	OID
rcPosLineConfigIndex pos ifIndex, same as rcPosPppIpxIfIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.26.4.1.1
rcPosLineConfigLocalMACAddress current local MAC address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.4.1.2
rcPosLineConfigRemoteMACAddress current remote MAC address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.4.1.3
rcPosLineConfigLocalIpAddr current local ip addr	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.26.4.1.4
rcPosLineConfigRemoteIpAddr current remote ip addr	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.26.4.1.5
rcPosLineConfigRemoteReportPeriod config. remote report period.	Integer32r/w	.1.3.6.1.4.1.2272.1.26.4.1.6
rcPosLineConfigLqrThreshold config. input quality.	Integer32r/w Enumerated Values: 1 cli 3 snmp 4 eap 5 web	.1.3.6.1.4.1.2272.1.26.4.1.7
rcPosLineConfigOutQuality config. output quality.	SNMPv2-SMIInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.26.4.1.8
rcPosLineConfigPppStp STP PPP encoding enable T/F	EnableValuer/w Constraints: range: 1-20 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.26.4.1.9
rcPosLineConfigLoopBack perform loop-back.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.26.4.1.10
rcPosLineConfigIpxVlanMacAddress	SNMPv2-TCMacAddressr/w Constraints: range: 0-6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.4.1.11
rcPosLineConfigIpxRemoteMacAddress	SNMPv2-TCMacAddressr/w Constraints: range: 1-65536 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.26.4.1.12

rcPosSioCardConfigTable

table

.1.3.6.1.4.1.2272.1.26.6 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosSioCardConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosSioCardConfigTable'

Copy

Pos Sio Card Config Table

rcPosSioCardConfigEntry row .1.3.6.1.4.1.2272.1.26.6.1

Entry containing information of Pos Sio Card Config.

Indexes

No indexes recorded

Column	Syntax	OID
rcPosSioCardConfigSlotIndex slot Index.	Integer32	.1.3.6.1.4.1.2272.1.26.6.1.1
rcPosSioCardConfigAction	Enumerationr/w	.1.3.6.1.4.1.2272.1.26.6.1.2
rcPosSioCardConfigTraceMode	Enumerationr/w	.1.3.6.1.4.1.2272.1.26.6.1.3
rcPosSioCardConfigImageFileName POS Image file name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.26.6.1.4

rcPosOperStatusTable

table

.1.3.6.1.4.1.2272.1.26.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPosOperStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPosOperStatusTable'

Copy

rcPosOperStatusEntry row .1.3.6.1.4.1.2272.1.26.7.1

Indexes

No indexes recorded

Column	Syntax	OID
rcPosOperStatusIndex pos ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.26.7.1.1
rcPosOperStatusLqrStatus Operational status of pppLqrConfigStatus.	SNMPv2-SMIInteger32 Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.26.7.1.2
rcPosOperStatusLineLqrThreshold .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.7.1.3
rcPosOperStatusLinkMagicNumber .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.26.7.1.4
rcPosOperStatusLinePppStp	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.26.7.1.5

rcRadiusServerTable

table obsolete

.1.3.6.1.4.1.2272.1.29.2 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRadiusServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRadiusServerTable'

Copy

The RADIUS table (0 to 10 entries).  This
table lists the information of the RADIUS server.

rcRadiusServerEntry row .1.3.6.1.4.1.2272.1.29.2.1

A RADIUS server table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcRadiusServerPriorityobsolete Server priority, used to control which server to choose first to send authentication.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.2.1.1
rcRadiusServerAddressobsolete Server IP address of the RADIUS authentication server referred to in this table entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.29.2.1.2
rcRadiusServerTimeOutobsolete The time interval in seconds before the client retransmit the packet.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.2.1.3
rcRadiusServerEnableobsolete Enable or disable this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.2.1.4
rcRadiusServerMaxRetriesobsolete Maximum number of retransmissions.	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.29.2.1.5
rcRadiusServerUdpPortobsolete The UDP port the client is using to send requests to this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.2.1.6
rcRadiusServerSecretKeyobsolete The identifier of the RADIUS authentication client.	OctetStringr/w	.1.3.6.1.4.1.2272.1.29.2.1.7
rcRadiusServerAccessRequestsobsolete The number of RADIUS access-response packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.8
rcRadiusServerAccessAcceptsobsolete The number of RADIUS access-accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.9
rcRadiusServerAccessRejectsobsolete The number of RADIUS access-reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.10
rcRadiusServerBadResponsesobsolete The number of RADIUS invalid access-response packets received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.11
rcRadiusServerPendingRequestsobsolete The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.12
rcRadiusServerClientRetriesobsolete The number of authentication retransmission to this server.	SNMPv2-SMICounter32 Constraints: range: 2-180	.1.3.6.1.4.1.2272.1.29.2.1.13
rcRadiusServerRowStatusobsolete Used to create/delete entries.	SNMPv2-TCRowStatusr/w Constraints: range: 3-180 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.29.2.1.14
rcRadiusServerAcctEnableobsolete Enable or disable Radius Accounting on this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.2.1.15
rcRadiusServerAcctUdpPortobsolete The UDP port the client used to send accounting requests to this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.2.1.16
rcRadiusServerAcctOnRequestsobsolete The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.17
rcRadiusServerAcctOffRequestsobsolete The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.18
rcRadiusServerAcctStartRequestsobsolete The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.19
rcRadiusServerAcctStopRequestsobsolete The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.20
rcRadiusServerAcctInterimRequestsobsolete The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.21
rcRadiusServerAcctBadResponsesobsolete The number of Invalid responses received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.22
rcRadiusServerAcctPendingRequestsobsolete The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.23
rcRadiusServerAcctClientRetriesobsolete The number of RADIUS accounting packets retransmitted to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.2.1.24

rcRadiusServTable

table deprecated

.1.3.6.1.4.1.2272.1.29.3 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRadiusServTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRadiusServTable'

Copy

The RADIUS table (0 to 10 entries).  This
table lists the information of the RADIUS server.

rcRadiusServEntry row .1.3.6.1.4.1.2272.1.29.3.1

A RADIUS server table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcRadiusServPrioritydeprecated Server priority, used to control which server to choose first to send authentication.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.3.1.1
rcRadiusServAddressdeprecated Server IP address of the RADIUS authentication server referred to in this table entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.29.3.1.2
rcRadiusServTimeOutdeprecated The time interval in seconds before the client retransmit the packet.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.3.1.3
rcRadiusServEnabledeprecated Enable or disable this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.3.1.4
rcRadiusServMaxRetriesdeprecated Maximum number of retransmissions.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.3.1.5
rcRadiusServUdpPortdeprecated The UDP port the client is using to send requests to this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.3.1.6
rcRadiusServSecretKeydeprecated The identifier of the RADIUS authentication client.	OctetStringr/w	.1.3.6.1.4.1.2272.1.29.3.1.7
rcRadiusServAccessRequestsdeprecated The number of RADIUS access-response packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.8
rcRadiusServAccessAcceptsdeprecated The number of RADIUS access-accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.9
rcRadiusServAccessRejectsdeprecated The number of RADIUS access-reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.10
rcRadiusServBadResponsesdeprecated The number of RADIUS invalid access-response packets received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.11
rcRadiusServPendingRequestsdeprecated The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.12
rcRadiusServClientRetriesdeprecated The number of authentication retransmission to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.13
rcRadiusServRowStatusdeprecated Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.29.3.1.14
rcRadiusServAcctEnabledeprecated Enable or disable Radius Accounting on this server.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 version1 2 version2 3 version3 Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.3.1.15
rcRadiusServAcctUdpPortdeprecated The UDP port the client used to send accounting requests to this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.3.1.16
rcRadiusServAcctOnRequestsdeprecated The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Enumerated Values: 1 snoop 2 pim 3 snoopSpb 4 routedSpb 5 dvmrp 6 none 7 pimgwSpb Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.17
rcRadiusServAcctOffRequestsdeprecated The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.18
rcRadiusServAcctStartRequestsdeprecated The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.19
rcRadiusServAcctStopRequestsdeprecated The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.29.3.1.20
rcRadiusServAcctInterimRequestsdeprecated The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.21
rcRadiusServAcctBadResponsesdeprecated The number of Invalid responses received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.22
rcRadiusServAcctPendingRequestsdeprecated The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.23
rcRadiusServAcctClientRetriesdeprecated The number of RADIUS accounting packets retransmitted to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.24
rcRadiusServUsedBydeprecated cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login.	Enumeration	.1.3.6.1.4.1.2272.1.29.3.1.25
rcRadiusServNasIpAddressdeprecated RADIUS Client NAS Identifier for this server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.29.3.1.26
rcRadiusServRoundTripTimedeprecated Time different between the instance when a RADIUS request is sent and the corresponding response is received.	OctetString	.1.3.6.1.4.1.2272.1.29.3.1.27
rcRadiusServAccessChallangesdeprecated The number of RADIUS access-challanges packets sent to this server. This does not include retransmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.3.1.28
rcRadiusServSourceIpAddrdeprecated source IP address RADIUS packets.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.29.3.1.29

rcRadiusServHostTable

table

.1.3.6.1.4.1.2272.1.29.5 · 1 row entry · 30 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRadiusServHostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRadiusServHostTable'

Copy

The RADIUS Server Host table (0 to 10 entries).  This
table lists the information of the RADIUS server.

rcRadiusServHostEntry row .1.3.6.1.4.1.2272.1.29.5.1

A RADIUS server table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcRadiusServHostAddressType Inet Address Type of radius server host address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.29.5.1.1
rcRadiusServHostAddress Server IP address of the RADIUS authentication server referred to in this table entry.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.29.5.1.2
rcRadiusServHostUsedBy cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login. IGAP is not supported on the VSP 9000.	Enumeration Enumerated Values: 1 denyTX 2 denyRX 3 denyBOTH	.1.3.6.1.4.1.2272.1.29.5.1.3
rcRadiusServHostPriority Server priority, used to control which server to choose first to send authentication.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.5.1.4
rcRadiusServHostTimeOut The time interval in seconds before the client retransmit the packet.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.5.1.5
rcRadiusServHostEnable Enable or disable this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.5.1.6
rcRadiusServHostMaxRetries Maximum number of retransmissions.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.5.1.7
rcRadiusServHostUdpPort The UDP port the client is using to send requests to this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.29.5.1.8
rcRadiusServHostSecretKey The identifier of the RADIUS authentication client.	OctetStringr/w	.1.3.6.1.4.1.2272.1.29.5.1.9
rcRadiusServHostAccessRequests The number of RADIUS access-response packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.10
rcRadiusServHostAccessAccepts The number of RADIUS access-accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Enumerated Values: 0 none 1 flushEntry 2 flushGrp Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.11
rcRadiusServHostAccessRejects The number of RADIUS access-reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.12
rcRadiusServHostBadResponses The number of RADIUS invalid access-response packets received from this server.	SNMPv2-SMICounter32 Enumerated Values: 1 filtered 2 notfiltered Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.13
rcRadiusServHostPendingRequests The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.14
rcRadiusServHostClientRetries The number of authentication retransmission to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.15
rcRadiusServHostRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.29.5.1.16
rcRadiusServHostAcctEnable Enable or disable Radius Accounting on this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.29.5.1.17
rcRadiusServHostAcctUdpPort The UDP port the client used to send accounting requests to this server.	Integer32r/w Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.2272.1.29.5.1.18
rcRadiusServHostAcctOnRequests The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.19
rcRadiusServHostAcctOffRequests The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.20
rcRadiusServHostAcctStartRequests The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.21
rcRadiusServHostAcctStopRequests The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.22
rcRadiusServHostAcctInterimRequests The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.23
rcRadiusServHostAcctBadResponses The number of Invalid responses received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.24
rcRadiusServHostAcctPendingRequests The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or…	SNMPv2-SMICounter32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.29.5.1.25
rcRadiusServHostAcctClientRetries The number of RADIUS accounting packets retransmitted to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.26
rcRadiusServHostNasIpAddress RADIUS Client NAS Identifier for this server.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.29.5.1.27
rcRadiusServHostRoundTripTime Time different between the instance when a RADIUS request is sent and the corresponding response is received.	OctetString	.1.3.6.1.4.1.2272.1.29.5.1.28
rcRadiusServHostAccessChallanges The number of RADIUS access-challanges packets sent to this server. This does not include retransmission.	SNMPv2-SMICounter32 Enumerated Values: 1 denyTX 2 denyRX 3 denyBOTH 4 allowTX 5 allowRX 6 allowBOTH Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.29.5.1.29
rcRadiusServHostSourceIpAddr source IP address RADIUS packets.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.29.5.1.30

rcIgmpInterfaceExtnTable

table

.1.3.6.1.4.1.2272.1.30.1 · 1 row entry · 37 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpInterfaceExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpInterfaceExtnTable'

Copy

rcIgmpInterfaceExtnEntry row .1.3.6.1.4.1.2272.1.30.1.1

Indexes

rcIgmpChannelLimitIfIndex rcIgmpChannelLimitPort

Column	Syntax	OID
rcIgmpInterfaceExtnIfIndex ifindex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.1
rcIgmpInterfaceExtnSnoopEnable enable snoop.	SNMPv2-TCTruthValuer/w Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.2
rcIgmpInterfaceExtnProxySnoopEnable enable proxy snoop.	SNMPv2-TCTruthValuer/w Constraints: range: 0-65535 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.3
rcIgmpInterfaceExtnMaxAdvertiseInterval	Integer32r/w	.1.3.6.1.4.1.2272.1.30.1.1.4
rcIgmpInterfaceExtnMinAdvertiseInterval	Integer32r/w	.1.3.6.1.4.1.2272.1.30.1.1.5
rcIgmpInterfaceExtnMaxInitialAdvertiseInterval	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.6
rcIgmpInterfaceExtnMaxInitialAdvertments	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.7
rcIgmpInterfaceExtnNeighborDeadInterval	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.8
rcIgmpInterfaceExtnFastLeaveEnable Enable fast leave on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.9
rcIgmpInterfaceExtnFastLeavePortMembers The set of ports that are enabled for fast leave.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.1.1.10
rcIgmpInterfaceExtnMrdiscEnable Enable/disable multicast router discovery.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.11
rcIgmpInterfaceExtnDiscoveredRouterPorts list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.1.1.12
rcIgmpInterfaceExtnSnoopMRouterPorts The set of ports in this interface that provide connectivity to an IP Multicast router.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.1.1.13
rcIgmpInterfaceExtnSnoopActiveMRouterPorts Active ports.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.1.1.14
rcIgmpInterfaceExtnSnoopMRouterExpiration Multicast querier router aging time out.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.15
rcIgmpInterfaceExtnFlushAction IGMP flush action.	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.1.1.16
rcIgmpInterfaceExtnRouterAlertEnable Enable Router Alert Check.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.1.1.17
rcIgmpInterfaceExtnSsmEnable enable SSM.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 dynamic 2 static Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.18
rcIgmpInterfaceExtnIgapEnable enable/disable IGAP.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.1.1.19
rcIgmpInterfaceExtnAccntEnable enable/disable accounting.	EnableValuer/w Constraints: range: 0-16777215 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.1.1.20
rcIgmpInterfaceExtnAuthEnable enable/disable authentication.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.1.1.21
rcIgmpInterfaceExtnStreamLimitEnable Stream Limitation enable/disable.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.1.1.22
rcIgmpInterfaceExtnMaxStreams Maximum number of stream.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.23
rcIgmpInterfaceExtnNumStreams Current number of streams.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.1.1.24
rcIgmpInterfaceExtnNewQuerier The address of the New IGMP Querier on the IP subnet to which this interface is attached.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.1.1.25
rcIgmpInterfaceExtnSnoopQuerierEnable enable snoop querier.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.26
rcIgmpInterfaceExtnSnoopQuerierAddr The pseudo address of the IGMP Snoop Querier.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.1.1.27
rcIgmpInterfaceExtnMvrEnable Enable or disable mcast-vlan-registration on a vlan, it is used to specified a vlan works as a mcast-vlan, maximum 16 mcast-vlan is supported.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.28
rcIgmpInterfaceExtnMvrProxyEnable enable or disable mcast-vlan-registration proxy on a vlan, you must enable mcast-vlan-registration at first.	SNMPv2-TCTruthValuer/w Enumerated Values: 1 network 2 access Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.29
rcIgmpInterfaceExtnDynamicDowngradeEnable enable dynamic downgrade the IGMP version when older version query message was received.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.30
rcIgmpInterfaceExtnCompatibilityModeEnable enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.31
rcIgmpInterfaceExtnOperVersion The operational version of IGMP which is running on this interface.	Enumeration	.1.3.6.1.4.1.2272.1.30.1.1.32
rcIgmpInterfaceExtnExplicitHostTrackingEnable Enable the IGMP protocol running in version 3 to track hosts per channels/groups.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.1.1.33
rcIgmpInterfaceExtnMcastMode IGMP interface mode	Enumeration	.1.3.6.1.4.1.2272.1.30.1.1.34
rcIgmpInterfaceExtnSnoopMRouterLPorts The set of logical ports (for example, WLAN tunnels) in this interface that provide connectivity to an IP Multicast router.	LPortSet Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.1.1.35
rcIgmpInterfaceExtnSnoopActiveMRouterLPorts Active logical ports (for example, WLAN tunnels).	LPortSet Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.30.1.1.36
rcIgmpInterfaceExtnL2Isid L2 ISID of the cvlan.	Integer32	.1.3.6.1.4.1.2272.1.30.1.1.37

rcIgmpStaticTable

table

.1.3.6.1.4.1.2272.1.30.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpStaticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpStaticTable'

Copy

rcIgmpStaticEntry row .1.3.6.1.4.1.2272.1.30.2.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpStaticIfIndex ifindex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.2.1.1
rcIgmpStaticGrpAddr Ip multicast address. The GrpAddress holds the starting range for the address range. If the ToGrpAddress is not entered, the it is as good as entering a single address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.2.1.2
rcIgmpStaticMemberPorts egressing ports.	PortSetr/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.30.2.1.3
rcIgmpStaticNotAllowedToJoin not allowed to join.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.2.1.4
rcIgmpStaticRowStatus Used to create/delete entries in the rcIgmpStaticEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.2.1.5
rcIgmpStaticToGrpAddr To hold the range for the GrpAddress.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.2.1.6

rcIgmpAccessTable

table

.1.3.6.1.4.1.2272.1.30.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpAccessTable'

Copy

rcIgmpAccessEntry row .1.3.6.1.4.1.2272.1.30.3.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpAccessIfIndex ifindex	InterfaceIndex Enumerated Values: 1 version1 2 version2 3 version3 Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.3.1.1
rcIgmpAccessGrpAddr ip multicast addr.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.3.1.2
rcIgmpAccessHostAddr host addr.	SNMPv2-SMIIpAddress Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.30.3.1.3
rcIgmpAccessMode denyTX(1), denyRX(2), denyBOTH(3).	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.3.1.4
rcIgmpAccessRowStatus Used to create/delete entries in the rcIgmpAccessEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.3.1.5
rcIgmpAccessHostMask host mask.	SNMPv2-SMIIpAddress Constraints: range: 2-255	.1.3.6.1.4.1.2272.1.30.3.1.6

rcIgmpSenderTable

table

.1.3.6.1.4.1.2272.1.30.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpSenderTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpSenderTable'

Copy

rcIgmpSenderEntry row .1.3.6.1.4.1.2272.1.30.4.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpSenderGrpAddr ip multicast addr.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.4.1.1
rcIgmpSenderIfIndex ifindex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.4.1.2
rcIgmpSenderMemberAddr host addr.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.4.1.3
rcIgmpSenderAction none(0), flushEntry(1), flushGrp(2).	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.4.1.4
rcIgmpSenderTPort Igmp Sender Tport.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.4.1.5
rcIgmpSenderState Indicates if a sender exists because of an IGMP access filter or not.	Enumeration	.1.3.6.1.4.1.2272.1.30.4.1.6

rcIgmpSsmTable

table deprecated

.1.3.6.1.4.1.2272.1.30.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpSsmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpSsmTable'

Copy

rcIgmpSsmEntry row .1.3.6.1.4.1.2272.1.30.6.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpSsmIpMulticastGrpdeprecated This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.6.1.1
rcIgmpSsmIpSourcedeprecated This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.6.1.2
rcIgmpSsmLearningModedeprecated This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). Note that Dynamic may not be used in the first step of …	Enumeration	.1.3.6.1.4.1.2272.1.30.6.1.3
rcIgmpSsmActivitydeprecated This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value should be Active, otherwise it should say non-active. …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.6.1.4
rcIgmpSsmAdminStatedeprecated The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If the state is Disabled, then the entry will not be used, …	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.6.1.5
rcIgmpSsmRowStatusdeprecated Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.6.1.6

rcIgmpNewAccessTable

table

.1.3.6.1.4.1.2272.1.30.7 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpNewAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpNewAccessTable'

Copy

rcIgmpNewAccessEntry row .1.3.6.1.4.1.2272.1.30.7.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpNewAccessIfIndex ifindex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.7.1.1
rcIgmpNewAccessPrefixListId Prefix List ID.	Integer32	.1.3.6.1.4.1.2272.1.30.7.1.2
rcIgmpNewAccessPrefixListName Prefix List name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.30.7.1.3
rcIgmpNewAccessHostAddr host addr.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.7.1.4
rcIgmpNewAccessHostMask host mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.7.1.5
rcIgmpNewAccessActionMode action mode.	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.7.1.6
rcIgmpNewAccessRowStatus Used to create/delete entries in the rcIgmpNewAccessEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.7.1.7

rcIgmpChannelLimitTable

table

.1.3.6.1.4.1.2272.1.30.8 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpChannelLimitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpChannelLimitTable'

Copy

rcIgmpChannelLimitEntry row .1.3.6.1.4.1.2272.1.30.8.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpChannelLimitIfIndex ifindex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.8.1.1
rcIgmpChannelLimitPort The port belong to this vlan.	Integer32	.1.3.6.1.4.1.2272.1.30.8.1.2
rcIgmpChannelLimitMaxStreams Maximum number of stream.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.30.8.1.3
rcIgmpChannelLimitNumStreams Current number of streams.	SNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.30.8.1.4
rcIgmpChannelLimitRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.8.1.5

rcIgmpIgapServiceAbilityTable

table

.1.3.6.1.4.1.2272.1.30.9 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpIgapServiceAbilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpIgapServiceAbilityTable'

Copy

rcIgmpIgapServiceAbilityEntry row .1.3.6.1.4.1.2272.1.30.9.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpIgapServiceAbilityIfIndex ifindex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.9.1.1
rcIgmpIgapServiceAbilityAuthSuccess The port belong to this vlan.	SNMPv2-SMICounter64 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.30.9.1.2
rcIgmpIgapServiceAbilityAuthReject Maximum number of stream.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.30.9.1.3
rcIgmpIgapServiceAbilityRespTimeout Current number of streams.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.30.9.1.4
rcIgmpIgapServiceAbilityPapJoinReq Row Status.	SNMPv2-SMICounter64 Enumerated Values: 1 range 2 mask Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.30.9.1.5
rcIgmpIgapServiceAbilityBasicQuery Current number of streams.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.30.9.1.6
rcIgmpIgapServiceAbilityBasicLeave Row Status.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.30.9.1.7
rcIgmpIgapServiceAbilityClearStat Clear Counter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.9.1.8

rcIgmpCacheExtnTable

table

.1.3.6.1.4.1.2272.1.30.12 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpCacheExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpCacheExtnTable'

Copy

rcIgmpCacheExtnEntry row .1.3.6.1.4.1.2272.1.30.12.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpCacheExtnType It takes up either of the two values, dynamic or static depending upon whether the entry is learnt Dynamic or is added statically.	Enumeration	.1.3.6.1.4.1.2272.1.30.12.1.1
rcIgmpCacheExtnStaticPorts It displays the static ports for the static joins, this would be null for the dynamic entry.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.12.1.2
rcIgmpCacheExtnL2Isid L2 ISID of the cvlan.	Integer32	.1.3.6.1.4.1.2272.1.30.12.1.3

rcIgmpSnoopTraceTable

table

.1.3.6.1.4.1.2272.1.30.13 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpSnoopTraceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpSnoopTraceTable'

Copy

The table listing the multicast groups
traversing the snoop enabled router

rcIgmpSnoopTraceEntry row .1.3.6.1.4.1.2272.1.30.13.1

The entry listing the multicast groups
traversing the snoop enabled router

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpSnoopGrpAddr ip mcast addr of grp traversing the router	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.13.1.1
rcIgmpSnoopSrcAddr Ip src addr of the mcast grp address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.13.1.2
rcIgmpSnoopOutVlan Egress vlan id for the mcast group	InterfaceIndex Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.13.1.3
rcIgmpSnoopInPort Ingress port for the mcast grp	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.13.1.4
rcIgmpSnoopInVlan Ingress vlan id for the mcast source	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.13.1.5
rcIgmpSnoopOutPort Egress port of the mcast grp	PortSet Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.30.13.1.6
rcIgmpSnoopType The port type on which the snoop entry is learnt	Enumeration Enumerated Values: 1 noState 2 auth 3 accStart 4 authAndAcctStart 5 authAndAcctDisabled	.1.3.6.1.4.1.2272.1.30.13.1.7
rcIgmpSnoopOutLPort Egress logical port (for example, WLAN tunnel) list of the mcast grp	LPortSet Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.30.13.1.8

rcIgmpNewGroupTable

table

.1.3.6.1.4.1.2272.1.30.14 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpNewGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpNewGroupTable'

Copy

The (conceptual) table listing the multicast
groups configured in the device.

rcIgmpNewGroupEntry row .1.3.6.1.4.1.2272.1.30.14.1

An entry (conceptual row) representing an
Igmp group.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpNewGroupIpAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.14.1.1
rcIgmpNewGroupMembers IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.14.1.2
rcIgmpNewGroupInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32	.1.3.6.1.4.1.2272.1.30.14.1.3
rcIgmpNewGroupExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.14.1.4
rcIgmpNewGroupIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.14.1.5
rcIgmpNewGroupUserId User-id sending this group	OctetString	.1.3.6.1.4.1.2272.1.30.14.1.6
rcIgmpNewGroupMemberState Used for IGAP, to indicated member state.	Enumeration	.1.3.6.1.4.1.2272.1.30.14.1.7
rcIgmpNewGroupSessionTime Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its values correspondes to the accounting …	SNMPv2-SMIInteger32 Enumerated Values: 1 include 2 exclude Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.14.1.8
rcIgmpNewGroupActualInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. The value of object is same as rcIgmpNewGroupInPort except when rcIgmpNewGroupInPo…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.14.1.9
rcIgmpNewGroupL2Isid L2 ISID of the cvlan.	Integer32	.1.3.6.1.4.1.2272.1.30.14.1.10

rcIgmpInterfaceTable

table

.1.3.6.1.4.1.2272.1.30.15 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpInterfaceTable'

Copy

The (conceptual) table listing the interfaces on which IGMP
is enabled.

rcIgmpInterfaceEntry row .1.3.6.1.4.1.2272.1.30.15.1

An entry (conceptual row) representing an interface on
which IGMP is enabled.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpInterfaceIfIndex The interface for which IGMP is enabled.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.15.1.1
rcIgmpInterfaceQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this interface.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.15.1.2
rcIgmpInterfaceStatus The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.15.1.3
rcIgmpInterfaceVersion The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the …	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.15.1.4
rcIgmpInterfaceQuerier The address of the IGMP Querier on the IP subnet to which this interface is attached.	SNMPv2-SMIIpAddress Enumerated Values: 1 include 2 exclude Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.15.1.5
rcIgmpInterfaceQueryMaxResponseTime The maximum query response time advertised in IGMPv2 queries on this interface.	tenth of secondsInteger32r/w	.1.3.6.1.4.1.2272.1.30.15.1.6
rcIgmpInterfaceWrongVersionQueries The number of queries received whose IGMP version does not match rcIgmpInterfaceVersion. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.15.1.10
rcIgmpInterfaceJoins The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.15.1.11
rcIgmpInterfaceRobustness The robustness variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.	Integer32r/w	.1.3.6.1.4.1.2272.1.30.15.1.14
rcIgmpInterfaceLastMembQueryIntvl The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may…	tenths of secondsInteger32r/w	.1.3.6.1.4.1.2272.1.30.15.1.15
rcIgmpInterfaceOperVersion The operational version of IGMP which is running on this interface.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.2272.1.30.15.1.16
rcIgmpInterfaceOtherQuerierPresentTimeout A timeout interval.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.15.1.17
rcIgmpInterfaceSendQuery IGMP send query flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.15.1.18

rcIgmpCacheTable

table

.1.3.6.1.4.1.2272.1.30.16 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpCacheTable'

Copy

The (conceptual) table listing the IP multicast groups for
which there are members on a particular interface.

rcIgmpCacheEntry row .1.3.6.1.4.1.2272.1.30.16.1

An entry (conceptual row) in the rcIgmpCacheTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpCacheAddress The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.16.1.1
rcIgmpCacheIfIndex The interface for which this entry contains information for an IP multicast group address.	InterfaceIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.16.1.2
rcIgmpCacheLastReporter The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.16.1.4
rcIgmpCacheExpiryTime The minimum amount of time remaining before this entry will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.16.1.6
rcIgmpCacheVersion1HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to t…	secondsSNMPv2-SMIInteger32 Enumerated Values: 1 none 2 flushEntry 3 flushGrp Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.16.1.8

rcIgmpMvrGroupTable

table

.1.3.6.1.4.1.2272.1.30.17 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpMvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpMvrGroupTable'

Copy

The (conceptual) table listing the mcast-vlan-registration groups.

rcIgmpMvrGroupEntry row .1.3.6.1.4.1.2272.1.30.17.1

An entry (conceptual row) in the rcIgmpMvrGroupTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpMvrGroupGroupAddress The group's multicast ip address.	SNMPv2-SMIIpAddress Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.30.17.1.1
rcIgmpMvrGroupVlanId The igmp snoop enabled vlan this group belongs to.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.17.1.2
rcIgmpMvrGroupIgmpVersion Version of this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.17.1.3
rcIgmpMvrGroupLivingTime Living time of this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.17.1.4

rcIgmpMvrVlanTable

table

.1.3.6.1.4.1.2272.1.30.18 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpMvrVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpMvrVlanTable'

Copy

The (conceptual) table listing the mcast vlans
in mcast-vlan-registration.

rcIgmpMvrVlanEntry row .1.3.6.1.4.1.2272.1.30.18.1

An entry (conceptual row) in the rcIgmpMvrVlanTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpMvrVlanMvrVlanId The id of mcast-vlan.	RcVlanIdOrNone Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.30.18.1.1
rcIgmpMvrVlanMvrVlanProxy working mode of this mcast-vlan, proxy or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.18.1.2
rcIgmpMvrVlanSourcePort source port for this mcast-vlan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.18.1.3
rcIgmpMvrVlanSourceAddress querier address for the source in this mcast-vlan.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.18.1.4

rcIgmpMvrReceiverTable

table

.1.3.6.1.4.1.2272.1.30.19 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpMvrReceiverTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpMvrReceiverTable'

Copy

The (conceptual) table listing the mcast vlans and receiver vlans
in mcast-vlan-registration.

rcIgmpMvrReceiverEntry row .1.3.6.1.4.1.2272.1.30.19.1

An entry (conceptual row) in the rcIgmpMvrGroupTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpMvrReceiverVlanId The id of receiver vlan that bound to mcast-vlan.	RcVlanIdOrNone Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.30.19.1.1
rcIgmpMvrReceiverRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Constraints: range: 0-32 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.19.1.2

rcIgmpAccessControlListInfoTable

table

.1.3.6.1.4.1.2272.1.30.20 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpAccessControlListInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpAccessControlListInfoTable'

Copy

The (conceptual) table listing the Name and the Port List
for a specific IGMP Access Control List.

rcIgmpAccessControlListInfoEntry row .1.3.6.1.4.1.2272.1.30.20.1

An entry (conceptual row) in the rcIgmpAccessControlListInfoTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpAccessControlListInfoACLIndex An index value that uniquely identifies an IGMP Access Control List.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.30.20.1.1
rcIgmpAccessControlListInfoName Name of the IGMP Access Control List.	OctetStringr/w	.1.3.6.1.4.1.2272.1.30.20.1.2
rcIgmpAccessControlListInfoPortList List of ports that use this IGMP Access Control List.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.20.1.3
rcIgmpAccessControlListInfoRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.20.1.4

rcIgmpAccessControlListConditionsTable

table

.1.3.6.1.4.1.2272.1.30.21 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpAccessControlListConditionsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpAccessControlListConditionsTable'

Copy

The (conceptual) table listing the conditions (IP ranges,
subnets) for each IGMP Access Control List.

rcIgmpAccessControlListConditionsEntry row .1.3.6.1.4.1.2272.1.30.21.1

An entry (conceptual row) in the
rcIgmpAccessControlListConditionsTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpAccessControlListConditionsACLIndex An index value that uniquely identifies an IGMP Access Control List.	Integer32	.1.3.6.1.4.1.2272.1.30.21.1.1
rcIgmpAccessControlListConditionsIpAddrStart This is the IP address of the subnet or the Start address of the IP range.	SNMPv2-SMIIpAddress Enumerated Values: 1 md5 2 sha1 Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.21.1.2
rcIgmpAccessControlListConditionsIpAddrEndOrMask This is the mask of the subnet or the End address of the IP range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.21.1.3
rcIgmpAccessControlListConditionsType This value specifies if the stored entry is a subnet or an IP range.	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.21.1.4
rcIgmpAccessControlListConditionsRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-2147483647 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.21.1.5

rcIgmpStaticEntriesTable

table

.1.3.6.1.4.1.2272.1.30.22 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpStaticEntriesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpStaticEntriesTable'

Copy

The (conceptual) table listing the IGMP static entries installed for each vlan

rcIgmpStaticEntriesEntry row .1.3.6.1.4.1.2272.1.30.22.1

An entry (conceptual row) in the
rcIgmpStaticEntriesTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpStaticEntriesVlanId VlanId where this entry is installed.	Integer32	.1.3.6.1.4.1.2272.1.30.22.1.1
rcIgmpStaticEntriesGroupAddress This is the IP address of the IGMP group that is statically allowed on this vlan and port list.	SNMPv2-SMIIpAddress Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.30.22.1.2
rcIgmpStaticEntriesPortList List of ports where this IGMP Static Entry is installed.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.22.1.3
rcIgmpStaticEntriesRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.22.1.4

rcIgmpGroupExtTable

table

.1.3.6.1.4.1.2272.1.30.23 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpGroupExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpGroupExtTable'

Copy

The (conceptual) table listing the multicast groups configured in
the device.

rcIgmpGroupExtEntry row .1.3.6.1.4.1.2272.1.30.23.1

An entry (conceptual row) representing an Igmp group.

Indexes

rcTengDot3StatsIndex

Column	Syntax	OID
rcIgmpGroupExtIpAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.30.23.1.1
rcIgmpGroupExtSourceAddress IP Address of the source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.23.1.2
rcIgmpGroupExtMembers IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.23.1.3
rcIgmpGroupExtInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32	.1.3.6.1.4.1.2272.1.30.23.1.4
rcIgmpGroupExtExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.23.1.5
rcIgmpGroupExtIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.23.1.6
rcIgmpGroupExtUserId User-id sending this group	OctetString	.1.3.6.1.4.1.2272.1.30.23.1.7
rcIgmpGroupExtMemberState Used for IGAP, to indicated member state.	Enumeration	.1.3.6.1.4.1.2272.1.30.23.1.8
rcIgmpGroupExtSessionTime Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its value corresponds to the accounting d…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.23.1.9
rcIgmpGroupExtMode Address mode.	Enumeration	.1.3.6.1.4.1.2272.1.30.23.1.10

rcIgmpv3CacheTable

table

.1.3.6.1.4.1.2272.1.30.24 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpv3CacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpv3CacheTable'

Copy

The (conceptual) table listing the Igmpv3 specific data
corresponding to each interface, port  and multicast group pair on
a Router.

rcIgmpv3CacheEntry row .1.3.6.1.4.1.2272.1.30.24.1

An entry (conceptual row) representing an Igmpv3 Group.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpv3CacheEntryGroupAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.24.1.1
rcIgmpv3CacheEntryIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.2
rcIgmpv3CacheEntryInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32	.1.3.6.1.4.1.2272.1.30.24.1.3
rcIgmpv3CacheEntryModeExpiryTimer This value is applicable only to IGMPv3-compatible nodes and represents the time remaining before the interface EXCLUDE state expires and the interface state transitions to INCLUDE mode. This value can never be greater…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.4
rcIgmpv3CacheEntryVersion1HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. This entry only applies to IGMPv1 hosts. Upon hearing any IGMPv1 Re…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.5
rcIgmpv3CacheEntryVersion2HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. Upon hearing any IGMPv2 Membership Report, this value is reset to th…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.6
rcIgmpv3CacheEntrySourceFilterMode The current group state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration	.1.3.6.1.4.1.2272.1.30.24.1.7

rcIgmpRouterSrcListTable

table

.1.3.6.1.4.1.2272.1.30.25 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpRouterSrcListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpRouterSrcListTable'

Copy

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair on
a Router.

rcIgmpRouterSrcListEntry row .1.3.6.1.4.1.2272.1.30.25.1

An entry (conceptual row) representing an
Igmp Source.

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpRouterSrcListGroupAddress The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.1
rcIgmpRouterSrcListIfIndex The interface for which this entry contains information for an IP multicast group address.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.25.1.2
rcIgmpRouterSrcListInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source.	Integer32	.1.3.6.1.4.1.2272.1.30.25.1.3
rcIgmpRouterSrcListHostAddress The host address to which this entry corresponds.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.4
rcIgmpRouterSrcListMemberAddress IP Address of a member that has sent source specific report wishing to join this source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.5
rcIgmpRouterSrcListExpire This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.25.1.6
rcIgmpRouterSrcListMode The current member state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration	.1.3.6.1.4.1.2272.1.30.25.1.7
rcIgmpRouterSrcListMemberExpire This value indicates the time until the member for this source will expire	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.25.1.8

rcIgmpNewSsmTable

table

.1.3.6.1.4.1.2272.1.30.26 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpNewSsmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpNewSsmTable'

Copy

rcIgmpNewSsmEntry row .1.3.6.1.4.1.2272.1.30.26.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpNewSsmIpMulticastGrp This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.26.1.1
rcIgmpNewSsmIpSource This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.26.1.2
rcIgmpNewSsmLearningMode This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). Note that Dynamic may not be used in the first step of …	Enumeration	.1.3.6.1.4.1.2272.1.30.26.1.3
rcIgmpNewSsmActivity This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value should be Active, otherwise it should say non-active. …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.26.1.4
rcIgmpNewSsmAdminState The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If the state is Disabled, then the entry will not be used, …	EnableValuer/w Constraints: range: 0-2147483647 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.30.26.1.5
rcIgmpNewSsmRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.26.1.6

rcIgmpSendersTable

table

.1.3.6.1.4.1.2272.1.30.28 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIgmpSendersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIgmpSendersTable'

Copy

This table obsoletes rcIgmpSenderTable

rcIgmpSendersEntry row .1.3.6.1.4.1.2272.1.30.28.1

Indexes

No indexes recorded

Column	Syntax	OID
rcIgmpSendersIfIndex ifindex - Uniquely identifies entries in the table	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.30.28.1.1
rcIgmpSendersGrpAddr Ip multicast address of a group	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.28.1.2
rcIgmpSendersMemberAddr ip address of a host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.28.1.3
rcIgmpSendersAction none(1), flushEntry(2), flushGrp(3). It describes the IGMP Sender action.	Enumerationr/w	.1.3.6.1.4.1.2272.1.30.28.1.4
rcIgmpSendersTPort Igmp Sender Tport.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.28.1.5
rcIgmpSendersState Indicates if a sender exists because of an IGMP access filter or not.	Enumeration	.1.3.6.1.4.1.2272.1.30.28.1.6
rcIgmpSendersL2Isid L2 ISID of the cvlan	Integer32	.1.3.6.1.4.1.2272.1.30.28.1.7

rcNtpServerTable

table

.1.3.6.1.4.1.2272.1.33.2 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcNtpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcNtpServerTable'

Copy

The NTP server table. This table lists the information
of a NTP server

rcNtpServerEntry row .1.3.6.1.4.1.2272.1.33.2.1

A NTP server table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcNtpServerAddress Server IP address of NTP time source referred to in this table entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.33.2.1.1
rcNtpServerEnable Enable or disable this server for participation in time update.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.33.2.1.2
rcNtpServerAuthentication Enable or disable the MD5 Authentication on this serve.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.33.2.1.3
rcNtpServerKeyId Public Key used to generate MD5 digest for this server.	Integer32r/w	.1.3.6.1.4.1.2272.1.33.2.1.4
rcNtpServerAccessAttempts The number of NTP requests sent to this server	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.33.2.1.5
rcNtpServerAccessSuccess The number of times this server was selected to update the time	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.33.2.1.6
rcNtpServerAccessFailure The number of times this server was rejected from updating the time	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.33.2.1.7
rcNtpServerRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.33.2.1.8
rcNtpServerStratum Stratum of this server	OctetString	.1.3.6.1.4.1.2272.1.33.2.1.9
rcNtpServerVersion NTP version of this server	OctetString	.1.3.6.1.4.1.2272.1.33.2.1.10
rcNtpServerRootDelay Root Delay of this server	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.33.2.1.11
rcNtpServerPrecision NTP precision of this server in seconds	OctetString Enumerated Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor	.1.3.6.1.4.1.2272.1.33.2.1.12
rcNtpServerReachable NTP Reachability of this server	OctetString	.1.3.6.1.4.1.2272.1.33.2.1.13
rcNtpServerSynchronized Status of synchronization with this server	OctetString	.1.3.6.1.4.1.2272.1.33.2.1.14
rcNtpServerSourceIpAddr source IP address for NTP packets.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.33.2.1.15

rcNtpKeyTable

table

.1.3.6.1.4.1.2272.1.33.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcNtpKeyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcNtpKeyTable'

Copy

The NTP key table. This table lists the private key
of the public key Id

rcNtpKeyEntry row .1.3.6.1.4.1.2272.1.33.3.1

A NTP key table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcNtpKeyId Public Key used to generate MD5/SHA1 digest	Integer32	.1.3.6.1.4.1.2272.1.33.3.1.1
rcNtpKeySecret Private Key used to generate MD5/SHA1 Digest	OctetStringr/w	.1.3.6.1.4.1.2272.1.33.3.1.2
rcNtpKeyRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.33.3.1.3
rcNtpKeyType Key type: MD5 or SHA1	Enumerationr/w	.1.3.6.1.4.1.2272.1.33.3.1.4

rcSslMipTable

table

.1.3.6.1.4.1.2272.1.34.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSslMipTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSslMipTable'

Copy

This table would display the MIP of the SSL blade
according to the slot number.

rcSslMipTableEntry row .1.3.6.1.4.1.2272.1.34.2.1

This table get the MIP of the SSL blade on which
the blade is in different cluster.

Indexes

No indexes recorded

Column	Syntax	OID
rcSslMipSlot Used as an index to find out the MIP of SSL blade.	Integer32	.1.3.6.1.4.1.2272.1.34.2.1.1
rcSslMipMip Master IP of the SSL blade.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.34.2.1.2

rcSvlanTable

table

.1.3.6.1.4.1.2272.1.35.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSvlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSvlanTable'

Copy

A list of possible levels and their corresponding ether type.
The number of entries is eight.

rcSvlanEntry row .1.3.6.1.4.1.2272.1.35.2.1

A Stacked Vlan table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSvlanId Row Index.	Integer32	.1.3.6.1.4.1.2272.1.35.2.1.1
rcSvlanLevel A value that identifies the switch level associated with this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.35.2.1.2
rcSvlanEtherType The ether type value is used for svlan tagging.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.35.2.1.3

rcTengDot3StatsTable

table

.1.3.6.1.4.1.2272.1.50.1.1 · 1 row entry · 33 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTengDot3StatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTengDot3StatsTable'

Copy

Statistics for a collection of ethernet-like
interfaces attached to a particular system.

rcTengDot3StatsEntry row .1.3.6.1.4.1.2272.1.50.1.1.1

Statistics for a particular interface to an
ethernet-like medium.

Indexes

No indexes recorded

Column	Syntax	OID
rcTengDot3StatsIndex An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32	.1.3.6.1.4.1.2272.1.50.1.1.1.1
rcTengDot3StatsAlignmentErrors A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignme…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.2
rcTengDot3StatsFCSErrors A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckE…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.3
rcTengDot3StatsSingleCollisionFrames A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the correspondi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.4
rcTengDot3StatsMultipleCollisionFrames A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the correspo…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.5
rcTengDot3StatsSQETestErrors A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.6
rcTengDot3StatsDeferredTransmissions A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in coll…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.7
rcTengDot3StatsLateCollisions The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.8
rcTengDot3StatsExcessiveCollisions A count of frames for which transmission on a particular interface fails due to excessive collisions.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.9
rcTengDot3StatsInternalMacTransmitErrors A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.10
rcTengDot3StatsCarrierSenseErrors The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is i…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.11
rcTengDot3StatsFrameTooLongs A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is return…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.13
rcTengDot3StatsInternalMacReceiveErrors A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instan…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.16
rcTengDot3StatsEtherChipSet This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of several different chips. The MIB implementor is presented with a …	ObjectIdentifier	.1.3.6.1.4.1.2272.1.50.1.1.1.17
rcTengDot3StatsLinkFailures The total number of link failures enCounter32ed on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.1.1.18
rcTengDot3StatsPacketErrors The total number of packet errors enCounter32ed on this interface.	SNMPv2-SMICounter32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.1.1.19
rcTengDot3StatsCarrierErrors The total number of carrier errors enCounter32ed on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.1.1.20
rcTengDot3StatsLinkInactiveErrors The total number of link inactive errors enCounter32ed on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.1.1.21
rcTengDot3StatsInFlowCtrlPkts The total number of flow control packets received by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.22
rcTengDot3StatsOutFlowCtrlPkts The total number of flow control packets transmitted by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.23
rcTengDot3StatsFrameTooShorts The total number of frames that are too short that were enCounter32ed on this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.24
rcTengDot3StatsInPfcPkts The total number of Priority Flow Control (PFC) packets received by this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 filter 2 ipmc 3 local 4 mac 5 static 6 vrrp Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.26
rcTengDot3StatsOutPfcPkts The total number of Priority Flow Control (PFC) packets transmitted by this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.27
rcTengDot3StatsFramesBad The total number of bad frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.28
rcTengDot3StatsFragmentErrors The total number of fragment errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.29
rcTengDot3StatsLongJabberErrors The total number of long jabber errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.30
rcTengDot3StatsDefaultDrops The total number of default drops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.31
rcTengDot3StatsIllegalLenError The total number of illegal length error	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.32
rcTengDot3StatsMismatchError The total number of mismatch error	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.33
rcTengDot3StatsOutOfRangeError The total number of out of range error	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.50.1.1.1.34
rcTengDot3StatsOversize The total number of oversize	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.35
rcTengDot3StatsDataErrors The total number of data errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.36
rcTengDot3StatsJabberErrors The total number of jabbber errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.1.1.37

rcTengStatTable

table

.1.3.6.1.4.1.2272.1.50.1.2 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTengStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTengStatTable'

Copy

A table used to store port statistics.

rcTengStatEntry row .1.3.6.1.4.1.2272.1.50.1.2.1

interface Counter32s

Indexes

rcLacpKeyValue

Column	Syntax	OID
rcTengStatIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.50.1.2.1.1
rcTengStatBridgeInUnicastFrames The total number of incoming unicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.2
rcTengStatBridgeInMulticastFrames The total number of incoming multicast frames that were bridged.	SNMPv2-SMICounter32 Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.50.1.2.1.3
rcTengStatBridgeInBroadcastFrames The total number of incoming broadcast frames that were bridged.	SNMPv2-SMICounter32 Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.50.1.2.1.4
rcTengStatBridgeInDiscards The total number of frames that were discarded by the bridging entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.5
rcTengStatBridgeOutUnicastFrames The total number of outgoing unicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.6
rcTengStatBridgeOutMulticastFrames The total number of outgoing multicast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.7
rcTengStatBridgeOutBroadcastFrames The total number of outgoing broadcast frames that were bridged.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.8
rcTengStatRouteInUnicastFrames The total number of incoming unicast frames that were routed.	SNMPv2-SMICounter32 Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.50.1.2.1.9
rcTengStatRouteInMulticastFrames The total number of incoming multicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.10
rcTengStatRouteInDiscards The total number of frames that were discarded by the routing entity.	SNMPv2-SMICounter32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.50.1.2.1.11
rcTengStatRouteOutUnicastFrames The total number of outgoing unicast frames that were routed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.12
rcTengStatRouteOutMulticastFrames The total number of outgoing multicast frames that were routed.	SNMPv2-SMICounter32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.50.1.2.1.13
rcTengStatStgForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.14
rcTengStatStgInConfigBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.15
rcTengStatStgInTcnBpdus	SNMPv2-SMICounter32 Enumerated Values: 2 auto 3 forceAuthorized Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.16
rcTengStatStgInBadBpdus	SNMPv2-SMICounter32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.50.1.2.1.17
rcTengStatStgOutConfigBpdus	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.18
rcTengStatStgOutTcnBpdus	SNMPv2-SMICounter32 Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.50.1.2.1.19
rcTengStatBridgeOutFrames Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual Counter32s are not supported.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.2.1.20

rcTengIfTable

table

.1.3.6.1.4.1.2272.1.50.1.3 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTengIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTengIfTable'

Copy

A list of interface entries.  The number of entries
is given by the value of engIfNumber.

rcTengIfEntry row .1.3.6.1.4.1.2272.1.50.1.3.1

An entry containing management information applicable
to a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcTengIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.50.1.3.1.1
rcTengIfDescr A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.	OctetString	.1.3.6.1.4.1.2272.1.50.1.3.1.2
rcTengIfType The type of interface. Additional values for IfType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	Enumeration	.1.3.6.1.4.1.2272.1.50.1.3.1.3
rcTengIfMtu The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.50.1.3.1.4
rcTengIfSpeed An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.3.1.5
rcTengIfPhysAddress The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained by this object. For interfaces which do not have such an add…	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2272.1.50.1.3.1.6
rcTengIfAdminStatus The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with IfAdminStatus in the down(2) state. As a resu…	Enumerationr/w Enumerated Values: 1 initialize 2 disconnected 3 connecting 4 authenticating 5 authenticated 6 aborting 7 held 8 forceAuth 9 forceUnauth 10 unauthenticated	.1.3.6.1.4.1.2272.1.50.1.3.1.7
rcTengIfOperStatus The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If IfAdminStatus is down(2) then IfOperStatus should be down(2). If IfAdminStatus is changed t…	Enumeration Enumerated Values: 1 request 2 response 3 success 4 fail 5 timeout 6 idle 7 initialize	.1.3.6.1.4.1.2272.1.50.1.3.1.8
rcTengIfLastChange The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object c…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.3.1.9
rcTengIfInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.10
rcTengIfInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.11
rcTengIfInNUcastPktsobsolete The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This object is deprecated in favour of IfInMulticastPkts and IfInBr…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.12
rcTengIfInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.13
rcTengIfInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of in…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.14
rcTengIfInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces which support proto…	SNMPv2-SMICounter64 Enumerated Values: 1 remoteAuthServer 2 localAuthServer Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.15
rcTengIfOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.16
rcTengIfOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Enumerated Values: 1 supplicantLogoff 2 portFailure 3 supplicantRestart 4 reauthFailed 5 authControlForceUnauth 6 portReInit 7 portAdminDisabled 999 notTerminatedYet Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.17
rcTengIfOutNUcastPktsobsolete The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.18
rcTengIfOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.19
rcTengIfOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could no…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.3.1.20
rcTengIfOutQLenobsolete The length of the output packet queue (in packets).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.3.1.21
rcTengIfSpecificobsolete A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this obje…	ObjectIdentifier	.1.3.6.1.4.1.2272.1.50.1.3.1.22

rcTengIfXTable

table

.1.3.6.1.4.1.2272.1.50.1.4 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTengIfXTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTengIfXTable'

Copy

A list of interface entries.  The number of entries
is given by the value of ifNumber.  This table
contains additional objects for the interface table.

rcTengIfXEntry row .1.3.6.1.4.1.2272.1.50.1.4.1

An entry containing additional management information
applicable to a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcTengIfXIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.50.1.4.1.1
rcTengIfName The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.50.1.4.1.2
rcTengIfInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.3
rcTengIfInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.4
rcTengIfOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.5
rcTengIfOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.6
rcTengIfHCInOctets The total number of octets received on the interface, including framing characters. This object is a 64-bit version of rcTengIfInOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.7
rcTengIfHCInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of rcTengIfInUcastPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.8
rcTengIfHCInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. T…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.9
rcTengIfHCInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of IfInBroadcastPkts.	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.50.1.4.1.10
rcTengIfHCOutOctets The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of rcTengIfOutOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.11
rcTengIfHCOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Thi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.12
rcTengIfHCOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Enumerated Values: 1 ethernet 2 pointToPoint 3 pointToMultipoint Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.50.1.4.1.13
rcTengIfHCOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-…	SNMPv2-SMICounter64 Constraints: range: 1280-1500 range: 9600-9600	.1.3.6.1.4.1.2272.1.50.1.4.1.14
rcTengIfLinkUpDownTrapEnable Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in…	Enumerationr/w	.1.3.6.1.4.1.2272.1.50.1.4.1.15
rcTengIfHighSpeed An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. Fo…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.50.1.4.1.16
rcTengIfPromiscuousMode This object has a value of false(2) If this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the me…	SNMPv2-TCTruthValuer/w Enumerated Values: 1 up 2 down Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.50.1.4.1.17
rcTengIfConnectorPresent This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.	SNMPv2-TCTruthValue Constraints: range: 1-3600000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.50.1.4.1.18

rcRecReservTable

table

.1.3.6.1.4.1.2272.1.51.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcRecReservTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcRecReservTable'

Copy

This table would display the statistics of several HW
record type used.  This will also let the user reserve
certain number of records for each type.

rcRecReservTablEntry row .1.3.6.1.4.1.2272.1.51.1.1

Indexes

No indexes recorded

Column	Syntax	OID
rcRecReservRecordType .	Enumeration	.1.3.6.1.4.1.2272.1.51.1.1.1
rcRecReservUsed Displayes the number of HW records actually usee by the recordType.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.51.1.1.2
rcRecReservReserved Displayes the number of HW records reserved for the recordType.	SNMPv2-SMIInteger32 Constraints: range: 0-1535	.1.3.6.1.4.1.2272.1.51.1.1.3
rcRecReservNewReserved Displayes the number of HW records that w ill be reserved for this recordType after reset if the configuration is saved.	SNMPv2-SMIInteger32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.51.1.1.4
rcRecReservDefReserved Number of records reserved for this recordType if loaded with factory default.	SNMPv2-SMIInteger32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.51.1.1.5

rcVlacpPeerMacAddressTable

table

.1.3.6.1.4.1.2272.1.53.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVlacpPeerMacAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVlacpPeerMacAddressTable'

Copy

Virtual LACP Peer Mac Address table

rcVlacpPeerMacAddressEntry row .1.3.6.1.4.1.2272.1.53.2.1

Entry containing info. for a particular peer

Indexes

No indexes recorded

Column	Syntax	OID
rcVlacpPeerMacAddressMAC Virtual LACP peer mac address on a port/MLT	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.53.2.1.1
rcVlacpPeerMacAddressMltId MLT Id on which Virtual LACP peer mac address is directly or indirectly connected	Integer32r/w	.1.3.6.1.4.1.2272.1.53.2.1.2
rcVlacpPeerMacAddressPort Ports on which Virtual LACP peer mac address is directly or indirectly connected	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.53.2.1.3
rcVlacpPeerMacAddressIpAddr Virtual LACP peer Ip Address on port/MLT	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 existonly 2 strict Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.53.2.1.4
rcVlacpPeerMacAddressRowStatus Used to create/delete entries in the peer address table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.53.2.1.5

rcLacpKeyTable

table

.1.3.6.1.4.1.2272.1.53.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLacpKeyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLacpKeyTable'

Copy

Table of settings associated with specific LACP keys.

rcLacpKeyEntry row .1.3.6.1.4.1.2272.1.53.4.1

Entry containing data associated with a specific LACP key.

Indexes

No indexes recorded

Column	Syntax	OID
rcLacpKeyValue LACP key value to which settings are associated.	Unsigned32	.1.3.6.1.4.1.2272.1.53.4.1.1
rcLacpKeyRowStatus Used to create/delete entries in the lacp key table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.53.4.1.2
rcLacpKeyMltId MLT Id associated with this key value.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.53.4.1.3
rcLacpKeySmltId SMLT Id associated with this key value.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.53.4.1.4

rcEapPortTable

table

.1.3.6.1.4.1.2272.1.57.2 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcEapPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcEapPortTable'

Copy

EAP properietery table for port level commands

rcEapPortEntry row .1.3.6.1.4.1.2272.1.57.2.1

Entry containing the EAP properietry configuration
information at the port level.

Indexes

No indexes recorded

Column	Syntax	OID
rcEapPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Enumerated Values: 1 unicast 2 anycast Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.57.2.1.1
rcEapPortGuestVlanEnable When this variable is set to TRUE, EAPoL Guest Vlan feature will be enabled on the port	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.2
rcEapPortGuestVlanId A value representing the VLAN to be used as a Guest VLAN. Access for unautheticated host/s connected to this port is provided through this VLAN. A value of 0 indicates that guest VLAN functionality is not enabled for th…	Integer32r/w	.1.3.6.1.4.1.2272.1.57.2.1.3
rcEapPortMultiHostEnable When this variable is set to TRUE, the system is enabled to have multiple 802.1X supplicants authenticated from the same port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.4
rcEapPortMultiHostMaxClients Integer value representing the maximum number of supplicants that are allowed to get authenticated on the port. This is applicable rcEapPortMultiHostEnable is set to TRUE.	Integer32r/w	.1.3.6.1.4.1.2272.1.57.2.1.5
rcEapPortAllowNonEapHost When this variable is set to TRUE, the system is enabled to allow hosts that do not participate in 802.1X authentication to get network access.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.6
rcEapPortNonEapMaxClients Integer value representing the maximum number of non-802.1X hosts that are allowed to connect to the port. A value of 0 indicates that non-802.1X authentication is disabled on this port	Integer32r/w	.1.3.6.1.4.1.2272.1.57.2.1.7
rcEapPortRadAuthNonEapClients When this variable is set to TRUE, the system is enabled to allow Non-Eap hosts on the port to get network access through radius based Mac authorization.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.8
rcEapPortShutDownOnIntrusion When this variable is set to TRUE, the port is shutdown on encountering [max + 1st] non-eap client on the port	SNMPv2-TCTruthValuer/w Constraints: range: 0-4294967295 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.9
rcEapPortStatus This object allows enabling EAPoL on the port. If status is auto(2), EAPoL is enabled and based on the 802.1x authentication, traffic is allowed. If status is forceAuthorized(3), EAPoL is disabled on the port and the …	Enumerationr/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.57.2.1.10
rcEapPortEapMaxClients This object specifies the maximum number of EAP-authentication MAC addresses allowed on this port. A value of 0 indicates that 802.1X authentication is disabled on this port.	Integer32r/w	.1.3.6.1.4.1.2272.1.57.2.1.11
rcEapPortMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on the port after one client has been authenticated (known as MHSA).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.2.1.12
rcEapPortFailOpenVlanId This object specifies the ID of the Fail-Open VLAN for this port. Authenticated devices are moved into the configured Fail Open VLAN when the switch declares the RADIUS servers unreachable. A value of 0 indicates Fail O…	Integer32r/w	.1.3.6.1.4.1.2272.1.57.2.1.16

rcEapPortAllowedMacTable

table

.1.3.6.1.4.1.2272.1.57.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcEapPortAllowedMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcEapPortAllowedMacTable'

Copy

EAP properietery table for allowed mac addresses of non
EAP clients

rcEapPortAllowedMacEntry row .1.3.6.1.4.1.2272.1.57.3.1

Entry containing MAC addresses for Non EAP hosts allowed
on the port

Indexes

No indexes recorded

Column	Syntax	OID
rcEapPortAllowedMacPort An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.57.3.1.1
rcEapPortAllowedMacAddr MAC address of a non EAP host that is granted access on the port.	SNMPv2-TCMacAddress Enumerated Values: 1 none 2 valid-life 3 preferred-life 4 infinite 5 no-advertise Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.57.3.1.2
rcEapPortAllowedMacRowStatus Used to create/delete entries in rcEapPortAllowedMacTable.	SNMPv2-TCRowStatusr/w Constraints: range: 0-3600000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.57.3.1.3

rcEapMultiHostStatusTable

table

.1.3.6.1.4.1.2272.1.57.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcEapMultiHostStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcEapMultiHostStatusTable'

Copy

This table is used to control the EAP multihost configuration
for each port in the system.

rcEapMultiHostStatusEntry row .1.3.6.1.4.1.2272.1.57.4.1

The EAP multihost configuration for a port.

Indexes

No indexes recorded

Column	Syntax	OID
rcEapMultiHostStatusPortNumber The Port number associated with this client.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.57.4.1.1
rcEapMultiHostStatusClientMACAddr The MAC address of the client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.57.4.1.2
rcEapMultiHostStatusPaeState The current value of the Authenticator PAE state machine.	Enumeration	.1.3.6.1.4.1.2272.1.57.4.1.3
rcEapMultiHostStatusBackendAuthState The current state of the Backend Authentication state machine.	Enumeration	.1.3.6.1.4.1.2272.1.57.4.1.4
rcEapMultiHostStatusVlanId The Vlan-Id associated with this client MAC. This Vlan could be port-based Vlan or Radius assigned Vlan.	SNMPv2-SMIInteger32 Enumerated Values: 1 eui-not-used 2 eui-used-with-ul-complement 3 eui-used-without-ul-complement Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.57.4.1.5

rcEapMultiHostSessionStatsTable

table

.1.3.6.1.4.1.2272.1.57.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcEapMultiHostSessionStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcEapMultiHostSessionStatsTable'

Copy

A table that contains the session statistics objects for the
Authenticator PAE associated with each EAP client on each 
Port.An entry appears in this table for each client MAC address 
 on each port that may authenticate access to itself.

rcEapMultiHostSessionStatsEntry row .1.3.6.1.4.1.2272.1.57.5.1

The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session for each client where…

Indexes

No indexes recorded

Column	Syntax	OID
rcEapMultiHostSessionStatsPortNumber The Port number associated with this client.	InterfaceIndex Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.57.5.1.1
rcEapMultiHostSessionStatsClientMACAddr The MAC address of this client.	SNMPv2-TCMacAddress Constraints: range: 0-4294967295 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.57.5.1.2
rcEapMultiHostSessionId A unique identifier for the session, in the form of a printable ASCII string of at least three characters.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.57.5.1.3
rcEapMultiHostSessionAuthenticMethod The authentication method used to establish the session.	Enumeration	.1.3.6.1.4.1.2272.1.57.5.1.4
rcEapMultiHostSessionTime The duration of the session in seconds.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.57.5.1.5
rcEapMultiHostSessionTerminateCause The reason for the session termination.	Enumeration	.1.3.6.1.4.1.2272.1.57.5.1.6
rcEapMultiHostSessionUserName The User-Name representing the identity of the Supplicant PAE.	SNMP-FRAMEWORK-MIBSnmpAdminString Enumerated Values: 1 none 2 send-advertisement 3 max-interval 4 min-interval 5 default-life-time 6 hop-limit 7 managed-flag 8 other-config-flag 9 dad-ns-num 10 linkMtu 11 reachableTime 12 retransmitTime Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.57.5.1.7

rcEapPortRadiusMacTable

table

.1.3.6.1.4.1.2272.1.57.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcEapPortRadiusMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcEapPortRadiusMacTable'

Copy

EAP proprietary table for non-EAP hosts
authenticated using radius server.

rcEapPortRadiusMacEntry row .1.3.6.1.4.1.2272.1.57.6.1

Entry containing MAC addresses for Non EAP hosts
authenticated using radius server.

Indexes

No indexes recorded

Column	Syntax	OID
rcEapPortRadiusMacPort An index value that uniquely identifies a port.	InterfaceIndex Constraints: range: 0-3600000	.1.3.6.1.4.1.2272.1.57.6.1.1
rcEapPortRadiusMacAddr MAC address of a non EAP host that is authenticated using radius server.	SNMPv2-TCMacAddress Constraints: range: 0-36000000 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.57.6.1.2
rcEapPortRadiusMacStatus Authentication status of the non EAP host that is authenticated using radius server.	Enumeration Constraints: range: 0-0 range: 4-9000	.1.3.6.1.4.1.2272.1.57.6.1.3
rcEapPortRadiusVlanId The Vlan-Id associated with this Non-EAP client MAC. This Vlan could be port-based Vlan or Radius assigned vlan.	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.57.6.1.4
rcEapPortRadiusMacClear Clears the Non-EAP MAC entry associated with this Index. The value should be set to true to clear the Non-EAP MAC entry. This MIB always return false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.57.6.1.5

rcGlobalMacFilterTable

table

.1.3.6.1.4.1.2272.1.60.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcGlobalMacFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcGlobalMacFilterTable'

Copy

A list of Global Mac filter entries.

rcGlobalMacFilterEntry row .1.3.6.1.4.1.2272.1.60.1.1

this entry is used for global mac filtering.Any Mac
address configured here will be discarded globally
by the switch.

Indexes

No indexes recorded

Column	Syntax	OID
rcGlobalMacFilterAddress A MAC address which will be discarded globally by the switch	SNMPv2-TCMacAddress Constraints: range: 0-0 range: 1280-1500 range: 1850-1850 range: 9500-9500 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.60.1.1.1
rcGlobalMacFilterRowStatus Used to create/delete entries in rcGlobalMacFilterTable.	SNMPv2-TCRowStatusr/w Constraints: range: 0-4294967295 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.60.1.1.2

rcIpv6InterfaceTable

table

.1.3.6.1.4.1.2272.1.62.1.1.2 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6InterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6InterfaceTable'

Copy

This table contains list of IPv6 interfaces and
per-interface IPv6-specific information.

rcIpv6InterfaceEntry row .1.3.6.1.4.1.2272.1.62.1.1.2.1

An entry of ipv6 interface In Table containing
per-interface information.

Indexes

rcIpv6StaticRouteDest rcIpv6StaticRoutePrefixLength rcIpv6StaticRouteNextHop rcIpv6StaticRouteIfIndex

Column	Syntax	OID
rcIpv6InterfaceIfIndex An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.2.1.1
rcIpv6InterfaceIdentifier IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.	IPV6-TCIpv6AddressIfIdentifierr/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.2.1.2
rcIpv6InterfaceIdentifierLength The length of the Interface Identifier in bits.	bitsInteger32r/w	.1.3.6.1.4.1.2272.1.62.1.1.2.1.3
rcIpv6InterfaceDescr A textual string containing information about the interface. This string may be set by network management system.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.62.1.1.2.1.4
rcIpv6InterfaceVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNoner/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.62.1.1.2.1.5
rcIpv6InterfaceType The interface type.	Enumeration Enumerated Values: 1 notReachable 2 tryToResolve 3 reachableNotInRtm 4 reachableInRtm	.1.3.6.1.4.1.2272.1.62.1.1.2.1.6
rcIpv6InterfaceReasmMaxSize MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. In VSP9000, Supported range for IO interface, supported range is(1280..1500 | 1850 | 9500). For Mgmt interfac…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.62.1.1.2.1.7
rcIpv6InterfacePhysAddress The media-dependent `physical' address, for the ethernet media it is the MAC address	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.8
rcIpv6InterfaceAdminStatus The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.9
rcIpv6InterfaceOperStatus Operating status of the interface.	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.2.1.10
rcIpv6InterfaceReachableTime The time (in milliseconds) a neighbor is considered reachable after receiving a reachability confirmation. REFERENCE RFC2461, Section 6.3.2	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.2.1.11
rcIpv6InterfaceRetransmitTimedeprecated Deprecated. Use rcIpv6InterfaceRetransmitTimer instead.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.2.1.12
rcIpv6InterfaceMulticastAdminStatus This indicates the admin status for multicast for this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.13
rcIpv6InterfaceRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.2.1.14
rcIpv6InterfaceDhcpEnabled Enable or disable DHCP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.15
rcIpv6InterfaceMacOffset Used to request a particular MAC for an IPv6 VLAN. The system has 1536 mac addresses, last 4 are reserved for MG. One can either mention a mac offset while configuring IPv6 on a vlan or it can be alloted by the syst…	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.2.1.16
rcIpv6InterfaceRetransmitTimer The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. REFERENCE RFC2461, Section 6.3.2	Unsigned32r/w Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2272.1.62.1.1.2.1.17
rcIpv6InterfaceCurHopLimit The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. The default should be set …	Integer32r/w Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 5 invalid 6 unknown 7 incomplete	.1.3.6.1.4.1.2272.1.62.1.1.2.1.18
rcIpv6InterfaceClearIcmpStats Clear ICMP statistics for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.20
rcIpv6InterfaceClearGeneralStats Clear general statistics for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.21
rcIpv6InterfaceClearNeighborCache Clear Neighbor Cache for an interface	SNMPv2-TCTruthValuer/w Constraints: range: 1-4096 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.22
rcIpv6InterfaceClearDestinationCache Clear Destination Cache for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.23
rcIpv6InterfaceReversePathCheckEnable Used to indicate whether this interface should perform Reverse Path Check	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.24
rcIpv6InterfaceReversePathCheckMode Reverse Path Checking mode.	Enumerationr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.62.1.1.2.1.25
rcIpv6InterfaceForwardingEnabled Used to indicate whether this interface should perform forwarding	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.26
rcIpv6InterfaceRsmltEnable Used to indicate whether this interface has rsmlt enabled or not	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.27
rcIpv6InterfaceBfdEnable Used to indicate whether this interface has BFD enabled or not	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.28
rcIpv6InterfaceProcessRedirect Used to indicate whether this interface has ProcessRedirect enabled or not	SNMPv2-TCTruthValuer/w Constraints: range: 0-128 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.29
rcIpv6InterfaceIpsecEnable Used to indicate whether this interface has Ipsec enabled or not	SNMPv2-TCTruthValuer/w Constraints: range: 1-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.30

rcIpv6AddressTable

table

.1.3.6.1.4.1.2272.1.62.1.1.3 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6AddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6AddressTable'

Copy

This table contains addressing information relevant
to the entity's interfaces.
          
This table does not contain multicast address 
information. Tables for such information should be 
contained in multicast specific MIBs such as RFC3019.
          
While this table is writable the user will note that several
objects, such as rcIpv6AddressOrigin, are not. The 
intention in allowing a user to write to this table is to 
allow them to add or remove any entry that isn't permanent.
The user should be  allowed to modify objects and entries 
when that would not cause inconsistencies within the table.
Allowing write access to objects such as rcIpv6AddressOrigin
could allow a user to insert an entry and then label it 
incorrectly.

rcIpv6AddressEntry row .1.3.6.1.4.1.2272.1.62.1.1.3.1

An address mapping for a particular interface. Note that
when an address is added to an interface the resulted
prefix is added to that interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6AddressIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfInd…	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.3.1.1
rcIpv6AddressAddr The IPv6 address to which this entry's addressing information pertains. This is one of the ipv6 addresses that this interface(identified by the rcIpv6AddressIfIndex) has. Implementors need to be aware t…	IPV6-TCIpv6Address Constraints: range: 1-6142	.1.3.6.1.4.1.2272.1.62.1.1.3.1.2
rcIpv6AddressType The type of address. It is either unicast or anycast IPv6 addresses (RFC3513).	Enumerationr/w Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.62.1.1.3.1.3
rcIpv6AddressPrefixLength Prefix Length value for this address. Cannot be changed after the creation. This field MUST be provided in order to create an entry in this table.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.3.1.4
rcIpv6AddressPrefix A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.5
rcIpv6AddressOrigin The origin of the address. The origin of the address, one of: other(1),manual(2), dhcp(4),linklayer(5), random(6)	IpAddressOriginTC Type Values: 1 other 2 manual 4 dhcp 5 linklayer 6 random	.1.3.6.1.4.1.2272.1.62.1.1.3.1.6
rcIpv6AddressStatus The status of the address, describing if the address can be used for communication. It will One of: preferred(1), deprecated(2),invalid(3),inaccessible(4),unknown(5), tentative(6), duplicate(7)	IpAddressStatusTC Type Values: 1 preferred 2 deprecated 3 invalid 4 inaccessible 5 unknown 6 tentative 7 duplicate	.1.3.6.1.4.1.2272.1.62.1.1.3.1.7
rcIpv6AddressCreated The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.8
rcIpv6AddressLastChanged The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.9
rcIpv6AddressRowStatus The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether ot…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.3.1.10
rcIpv6AddressValidLifetime Valid lifetime in seconds, indicates how long this address is valid. A result of 4294967295 means infinite	Unsigned32	.1.3.6.1.4.1.2272.1.62.1.1.3.1.11
rcIpv6AddressPrefLifetime Preferred lifetime in seconds, indicates how long this address is in use and not deprecated. A result of 4294967295 means infinite	Unsigned32	.1.3.6.1.4.1.2272.1.62.1.1.3.1.12

rcIpv6PrefixTable

table

.1.3.6.1.4.1.2272.1.62.1.1.4 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PrefixTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PrefixTable'

Copy

This table allows the user to 
determine the source of an IP address or set of 
IP addresses and allows other tables to
share the information via pointer rather than by copying.
          
For example when the node configures both a unicast and
anycast address for a prefix the ipAddressPrefix objects for
those addresses will point to a single row in this table.
          
          
This table primarily provides support for IPv6 prefixes and
several of the objects are less meaningful for IPv4.  The
table continues to allow IPv4 addresses to allow future
flexibility.  In order to promote a common configuration
this document includes suggestions for default values for
IPv4 prefixes.  Each of these values may be overridden if an
object is meaningful to the node.
          
          
All prefixes used by this entity should be included in this
table independent of how the entity learned the prefix.
(This table isn't limited to prefixes learned from router
advertisements.)

rcIpv6PrefixEntry row .1.3.6.1.4.1.2272.1.62.1.1.4.1

An entry of ipv6 prefix In the Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PrefixIfIndex An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.4.1.1
rcIpv6PrefixAddr Prefix to create an ipv6 address in ipv6 interface table.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.4.1.2
rcIpv6PrefixLength Mask to create an ipv6 prefix entry either will be advertised or suppressed	Integer32 Enumerated Values: 1 cli 2 igap 3 snmp 4 eap 5 web	.1.3.6.1.4.1.2272.1.62.1.1.4.1.3
rcIpv6PrefixVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNone Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.62.1.1.4.1.4
rcIpv6PrefixUseDefaultVal Select one of the value to set/use it's value to default value. This is a bitmask field, setting all the bits means that all the options will be reverted to default values.	Enumerationr/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.62.1.1.4.1.5
rcIpv6PrefixValidLifeobsolete Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.4.1.6
rcIpv6PrefixPreferredLifeobsolete Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix.	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.2272.1.62.1.1.4.1.7
rcIpv6PrefixAtValidLife Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix.	SNMPv2-TCDateAndTimer/w Constraints: range: 1-65536 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.8
rcIpv6PrefixAtPreferredLife Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix.	SNMPv2-TCDateAndTimer/w Constraints: range: 0-32 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.9
rcIpv6PrefixInfinite if set the prefix's valid lifetime will not exprie.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.10
rcIpv6PrefixOnLinkFlag if set then this prefix can be used for onlink determination. This value be placed in the L-bit field in the prefix information option. It is a 1 bit flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.11
rcIpv6PrefixAutoFlag if set then this prefix can be used for autonomous address config. This value be placed in the auto-flag field in the prefix information option. It is a 1 bit flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.12
rcIpv6PrefixAddressEui Use an EUI-64 interface ID in the low-order 64bits of the address when not specified in the address field. If enabled use EUI, otherwise use EUI-64 and complement U/L (Universal/Local bit). This operation should be allo…	Enumerationr/w	.1.3.6.1.4.1.2272.1.62.1.1.4.1.13
rcIpv6PrefixNoAdvertise if set then this prefix can not be included in the neighbor advertisement.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.14
rcIpv6PrefixRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.15
rcIpv6PrefixValidLifetime Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. Value of 4294967295 represents infinity.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.4.1.16
rcIpv6PrefixPreferredLifetime Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. Value of 4294967295 represents infinity.	Unsigned32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.62.1.1.4.1.17

rcIpv6RouterAdvertTable

table

.1.3.6.1.4.1.2272.1.62.1.1.5 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RouterAdvertTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RouterAdvertTable'

Copy

The table containing information 
used to construct router advertisements.

rcIpv6RouterAdvertEntry row .1.3.6.1.4.1.2272.1.62.1.1.5.1

An entry containing information used to construct
router advertisements.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RouterAdvertIfIndex An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.5.1.1
rcIpv6RouterAdvertSendAdverts A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.2
rcIpv6RouterAdvertUseDefaultVal Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value.	Enumerationr/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.3
rcIpv6RouterAdvertMaxInterval Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 1800.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.4
rcIpv6RouterAdvertMinInterval Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and no greater than .75* max-interval.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.5
rcIpv6RouterAdvertReachableTime The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). Used to configure the amount of time th…	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.6
rcIpv6RouterAdvertRetransmitTimerdeprecated The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecified (by this router). Used t…	Integer32	.1.3.6.1.4.1.2272.1.62.1.1.5.1.7
rcIpv6RouterAdvertDefaultLifeTime The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and 9000 seconds. …	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.62.1.1.5.1.8
rcIpv6RouterAdvertCurHopLimit The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the rou…	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.9
rcIpv6RouterAdvertManagedFlag if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.10
rcIpv6RouterAdvertOtherConfigFlag if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.11
rcIpv6RouterAdvertDadNsNum The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is used to send one advertisment without any retransmissions.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.12
rcIpv6RouterAdvertLinkMTU The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6.2.1	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.13
rcIpv6RouterAdvertRetransmitTime The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecified (by this router). Used t…	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.5.1.14

rcIpv6StaticRouteTable

table

.1.3.6.1.4.1.2272.1.62.1.1.6 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6StaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6StaticRouteTable'

Copy

This table contains list of routes that are
created by the user to destination networks.

rcIpv6StaticRouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.6.1

An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6StaticRouteDest The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When the value of rcIpv6StaticRouteDest (excluding the zone inde…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.6.1.1
rcIpv6StaticRoutePrefixLength Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6StaticRouteDestAddr field.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.62.1.1.6.1.2
rcIpv6StaticRouteNextHop Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string.	IPV6-TCIpv6Address Enumerated Values: 1 notReachable 2 tryToResolve 3 reachableNotInRtm 4 reachableInRtm Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.6.1.3
rcIpv6StaticRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.	InterfaceIndex Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.62.1.1.6.1.4
rcIpv6StaticRouteDistance cost/distance to reach the destination for this node.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.6.1.5
rcIpv6StaticRouteStatus (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor to reach the static route's next-hop. (2)tryToResolve m…	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.6.1.6
rcIpv6StaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.6.1.7
rcIpv6StaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.6.1.8
rcIpv6StaticRouteRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.6.1.9

rcIpv6NetToPhysicalTable

table

.1.3.6.1.4.1.2272.1.62.1.1.7 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6NetToPhysicalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6NetToPhysicalTable'

Copy

The IP Address Translation table used for mapping from IP
addresses to physical addresses.
          
The Address Translation tables contain the IP address to
'physical' address equivalences.  Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
          
While many protocols may be used to populate this table, ARP
[10] and Neighbor Discovery [4] are the most likely
options.

rcIpv6NetToPhysicalEntry row .1.3.6.1.4.1.2272.1.62.1.1.7.1

Each entry contains one IP address to `physical' address
equivalence.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6NetToPhysicalIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfInd…	InterfaceIndex Enumerated Values: 1 real 2 virtual Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.7.1.1
rcIpv6NetToPhysicalNetAddress The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. Implementors need to be aware that i…	IPV6-TCIpv6Address Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.62.1.1.7.1.2
rcIpv6NetToPhysicalPhysAddress The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. In the ethernet…	OctetStringr/w	.1.3.6.1.4.1.2272.1.62.1.1.7.1.3
rcIpv6NetToPhysicalInterface The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the value is 0 then the interface is CP port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.7.1.4
rcIpv6NetToPhysicalLastUpdated The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.7.1.5
rcIpv6NetToPhysicalType The type of mapping. The 'dynamic(2)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol. …	Enumerationr/w	.1.3.6.1.4.1.2272.1.62.1.1.7.1.6
rcIpv6NetToPhysicalState The Neighbor Unreachability Detection [4] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (eg. for IPv4), this object is always unknown(6). REFE…	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.7.1.8
rcIpv6NetToPhysicalRowStatus The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effec…	SNMPv2-TCRowStatusr/w Constraints: range: 100-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.7.1.9
rcIpv6NetToPhysicalBMac If the rcIpv6NetToPhysicalEntry is learned from a SPBM network, instead of using port to track where the rcIpv6NetToPhysicalNetAddress come from, the backbone MAC address is used to track that.	SNMPv2-TCMacAddress Constraints: range: 100-65535 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.62.1.1.7.1.10
rcIpv6NetToPhysicalCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.62.1.1.7.1.11

rcIpv6PrefixListTable

table

.1.3.6.1.4.1.2272.1.62.1.1.8 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6PrefixListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6PrefixListTable'

Copy

IPv6 Prefix List table

rcIpv6PrefixListEntry row .1.3.6.1.4.1.2272.1.62.1.1.8.1

An entry of Ipv6 Prefix List Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6PrefixListId Id of an IPv6 Prefix List	Unsigned32	.1.3.6.1.4.1.2272.1.62.1.1.8.1.1
rcIpv6PrefixListPrefix Is a member of a specific ipv6 prefix list. Adding the prefix to the given ipv6 prefix list	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.8.1.2
rcIpv6PrefixListPrefixMaskLen Mask length of the ipv6 prefix added to the prefix list	Unsigned32	.1.3.6.1.4.1.2272.1.62.1.1.8.1.3
rcIpv6PrefixListMaskLenFrom Lower bound of mask length of the ipv6 prefix added to the prefix list	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.8.1.4
rcIpv6PrefixListMaskLenUpto Higher bound of mask length of the ipv6 prefix added to the prefix list	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.8.1.5
rcIpv6PrefixListName Name of the Ipv6 prefix list	OctetStringr/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.62.1.1.8.1.6
rcIpv6PrefixListRowStatus Used to create/delete entries in the ipv6 prefix list table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.8.1.7

rcIpv6ConfDhcpRelayTable

table

.1.3.6.1.4.1.2272.1.62.1.1.9 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6ConfDhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6ConfDhcpRelayTable'

Copy

DHCP Relay for Ipv6 configuration table

rcIpv6ConfDhcpRelayEntry row .1.3.6.1.4.1.2272.1.62.1.1.9.1

Used to configure DHCP on a particular L3 interface. An
entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowS…

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6ConfDhcpIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	Integer32	.1.3.6.1.4.1.2272.1.62.1.1.9.1.1
rcIpv6ConfDhcpMaxHop Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server).	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.9.1.2
rcIpv6ConfDhcpRemoteIdEnabled Used to indicate if remote-id option is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.9.1.3
rcIpv6ConfDhcpNumRequests The total number of DHCP requests seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.9.1.4
rcIpv6ConfDhcpNumReplies The total number of DHCP replies seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.9.1.5
rcIpv6ConfDhcpRowStatus An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIp…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.9.1.6

rcIpv6DhcpForwardTable

table

.1.3.6.1.4.1.2272.1.62.1.1.10 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6DhcpForwardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6DhcpForwardTable'

Copy

DHCP Relay forwarding table.

rcIpv6DhcpForwardEntry row .1.3.6.1.4.1.2272.1.62.1.1.10.1

An entry used represents a DHCP Relayed message forwarding directive.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6DhcpForwardAgentAddr The IP address configured on an interface (i.e., a locally configured IP address).	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.10.1.1
rcIpv6DhcpForwardServerAddr The IP address of the DHCP server. If this IP address corresponds to a local interface address, the DHCP packet is multicast out the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.10.1.2
rcIpv6DhcpForwardEnabled Used to indicate whether the entry should be used.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.10.1.3
rcIpv6DhcpForwardRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.10.1.4

rcIpv6RadiusServTable

table

.1.3.6.1.4.1.2272.1.62.1.1.11 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RadiusServTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RadiusServTable'

Copy

The RADIUS table (0 to 10 entries).  This
table lists the information of the RADIUS server.

rcIpv6RadiusServEntry row .1.3.6.1.4.1.2272.1.62.1.1.11.1

A RADIUS server table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RadiusServAddress Server IP address of the RADIUS authentication server referred to in this table entry.	IPV6-TCIpv6Address Enumerated Values: 1 inactive 2 active Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.1
rcIpv6RadiusServUsedBy cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator,web(5) for EDM.	Enumeration Enumerated Values: 1 management 2 data	.1.3.6.1.4.1.2272.1.62.1.1.11.1.2
rcIpv6RadiusServPriority Server priority, used to control which server to choose first to send authentication.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.11.1.3
rcIpv6RadiusServTimeOut The time interval in seconds before the client retransmit the packet.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.11.1.4
rcIpv6RadiusServEnable Enable or disable this server.	SNMPv2-TCTruthValuer/w Constraints: range: 255-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.11.1.5
rcIpv6RadiusServMaxRetries Maximum number of retransmissions.	Unsigned32r/w Enumerated Values: 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 bgp 8 idrp 9 igrp 10 isis	.1.3.6.1.4.1.2272.1.62.1.1.11.1.6
rcIpv6RadiusServUdpPort The UDP port the client is using to send requests to this server.	Unsigned32r/w Enumerated Values: 1 b 2 be 3 a 4 ae	.1.3.6.1.4.1.2272.1.62.1.1.11.1.7
rcIpv6RadiusServSecretKey The identifier of the RADIUS authentication client.	OctetStringr/w	.1.3.6.1.4.1.2272.1.62.1.1.11.1.8
rcIpv6RadiusServAccessRequests The number of RADIUS access-response packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.9
rcIpv6RadiusServAccessAccepts The number of RADIUS access-accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.11.1.10
rcIpv6RadiusServAccessRejects The number of RADIUS access-reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Enumerated Values: 1 local 2 static 3 ospfv3Intra 4 ospfv3Inter 5 ospfv3External1 6 ospfv3External2 7 spbmLevel1 8 ebgp 9 ibgp 10 ripng Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.11
rcIpv6RadiusServBadResponses The number of RADIUS invalid access-response packets received from this server.	SNMPv2-SMICounter32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.11.1.12
rcIpv6RadiusServPendingRequests The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an a…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.13
rcIpv6RadiusServClientRetries The number of authentication retransmission to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.14
rcIpv6RadiusServAcctEnable Enable or disable Radius Accounting on this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.11.1.15
rcIpv6RadiusServAcctUdpPort The UDP port the client used to send accounting requests to this server.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.11.1.16
rcIpv6RadiusServAcctOnRequests The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.17
rcIpv6RadiusServAcctOffRequests The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.18
rcIpv6RadiusServAcctStartRequests The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Enumerated Values: 1 static 2 dynamic Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.19
rcIpv6RadiusServAcctStopRequests The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Enumerated Values: 1 static 2 dhcp Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.20
rcIpv6RadiusServAcctInterimRequests The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.21
rcIpv6RadiusServAcctBadResponses The number of Invalid responses received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.22
rcIpv6RadiusServAcctPendingRequests The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.23
rcIpv6RadiusServAcctClientRetries The number of RADIUS accounting packets retransmitted to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.24
rcIpv6RadiusServNasIpAddress RADIUS Client NAS Identifier for this server.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.25
rcIpv6RadiusServRoundTripTime Time different between the instance when a RADIUS request is sent and the corresponding response is received.	OctetString Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.62.1.1.11.1.26
rcIpv6RadiusServAccessChallanges The number of RADIUS access-challanges packets sent to this server. This does not include retransmission.	SNMPv2-SMICounter32 Enumerated Values: 1 bcast 2 ptpt 3 passive Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.27
rcIpv6RadiusServSourceIpAddr source IP address RADIUS packets.	IPV6-TCIpv6Addressr/w Enumerated Values: 0 none 1 simple 2 hmac-md5 Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.28
rcIpv6RadiusServRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Constraints: range: 1-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.11.1.29

rcIpv6MgmtPortStaticRouteTable

table

.1.3.6.1.4.1.2272.1.62.1.1.12 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6MgmtPortStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6MgmtPortStaticRouteTable'

Copy

This table contains list of routes that are
created by the user to destination networks
 on the management port.

rcIpv6MgmtPortStaticRouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.12.1

An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6MgmtPortStaticRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.12.1.1
rcIpv6MgmtPortStaticRouteDest The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When the value of rcIpv6StaticRouteDest (excluding the zone inde…	IPV6-TCIpv6Address Enumerated Values: 0 unknown 1 up 2 down Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.12.1.2
rcIpv6MgmtPortStaticRoutePrefixLength Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6MgmtPortStaticRouteDestAddr field.	Integer32	.1.3.6.1.4.1.2272.1.62.1.1.12.1.3
rcIpv6MgmtPortStaticRouteNextHop Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.12.1.4
rcIpv6MgmtPortStaticRouteDistance cost/distance to reach the destination for this node.	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.12.1.5
rcIpv6MgmtPortStaticRouteStatus (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor to reach the static route's next-hop. (2)tryToResolve m…	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.12.1.6
rcIpv6MgmtPortStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.62.1.1.12.1.7
rcIpv6MgmtPortStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.12.1.8
rcIpv6MgmtPortStaticRouteRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.12.1.9

rcIpv6DestinationCacheTable

table

.1.3.6.1.4.1.2272.1.62.1.1.13 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6DestinationCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6DestinationCacheTable'

Copy

Ipv6 Destination Cache table

rcIpv6DestinationCacheEntry row .1.3.6.1.4.1.2272.1.62.1.1.13.1

Used to display Destination Cache

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6DCacheDestAddr IPv6 Destination Address from the Destination Cache.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.13.1.1
rcIpv6DCacheIfIndex The last 16 bits of this object's value are interpreted as InterfaceIndex (it can represent either a physical, or a VLAN, or a tunnel interface); the first 16 bits are ignored when the object's value is interpreted.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.13.1.2
rcIpv6DCacheNextHop Ipv6 Next Hop for a Destination Cache entry.	IPV6-TCIpv6Address Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.62.1.1.13.1.3
rcIpv6DCacheIfType Interface type; it can be a real (i.e. VLAN, brouter, tunnel) or a virtual circuit (i.e. VRRP, RSMLT).	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.2272.1.62.1.1.13.1.4
rcIpv6DCacheIfData Used to display additional information about virtual circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId if it is a VRRP circuit); no information is displayed for real circuits.	OctetString	.1.3.6.1.4.1.2272.1.62.1.1.13.1.5
rcIpv6DCachePmtu Path MTU for the entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.13.1.6
rcIpv6DCachePmtuAge Indicates how much time (in seconds) has passed since the PMTU was updated the last time.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.13.1.7

rcIpv6InterfaceBfdTable

table

.1.3.6.1.4.1.2272.1.62.1.1.14 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6InterfaceBfdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6InterfaceBfdTable'

Copy

BFD configuration table

rcIpv6InterfaceBfdEntry row .1.3.6.1.4.1.2272.1.62.1.1.14.1

Used to configure BFD on a particular interface. An
entry is created automatically when the variable
rcIpv6InterfaceBfdEnable is set to TRUE and deleted when
rcIpv6InterfaceBfdEnable is set to FALSE.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6InterfaceBfdIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.14.1.1
rcIpv6InterfaceBfdMinRxInterval the min rx interval in milliseconds	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.14.1.2
rcIpv6InterfaceBfdTxInterval the desired tx interval in milliseconds	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.14.1.3
rcIpv6InterfaceBfdMultiplier the multiplier BFD wait before rx timeout	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.14.1.4
rcIpv6InterfaceBfdHoldOffInterval This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.62.1.1.14.1.6
rcIpv6InterfaceBfdStaticFlag This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled.	EnableValuer/w Constraints: range: 1-100 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.62.1.1.14.1.7

rcIpv6RouteTable

table

.1.3.6.1.4.1.2272.1.62.1.1.15 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RouteTable'

Copy

This entity's IPV6 Routing table.

rcIpv6RouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.15.1

A route to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RouteDest The destination IPv6 address of this route. This object may not take a Multicast address value.	IPV6-TCIpv6Address Enumerated Values: 1 bcast 2 ptpt Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.15.1.1
rcIpv6RoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32	.1.3.6.1.4.1.2272.1.62.1.1.15.1.2
rcIpv6RouteIndex The value which uniquely identifies the route among the routes to the same network layer destination. The way this value is chosen is implementation specific but it must be unique for rcIpv6RouteDest/rcIpv6RoutePfxLeng…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.15.1.3
rcIpv6RouteNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString	.1.3.6.1.4.1.2272.1.62.1.1.15.1.4

rcIpv6DefaultRoutersTable

table

.1.3.6.1.4.1.2272.1.62.1.1.16 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6DefaultRoutersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6DefaultRoutersTable'

Copy

IPv6 Default Routers Table.

rcIpv6DefaultRoutersEntry row .1.3.6.1.4.1.2272.1.62.1.1.16.1

The entry for the IPv6 Default Routers Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6DefaultRoutersAddress Learned Router Address for an IPv6 Default Routers Entry.	IPV6-TCIpv6Address Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.62.1.1.16.1.1
rcIpv6DefaultRoutersIfIndex Interface number for an IPv6 Default Routers Entry.	SNMPv2-SMIUnsigned32 Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.62.1.1.16.1.2
rcIpv6DefaultRoutersLifetime Remaining Router Lifetime for an IPv6 Default Routers Entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.16.1.3
rcIpv6DefaultRoutersActive See if a default router is active for an IPv6 Default Routers Entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.16.1.4

rcIpv6MLDHostCacheTable

table

.1.3.6.1.4.1.2272.1.62.1.1.17 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6MLDHostCacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6MLDHostCacheTable'

Copy

IPv6 MLD Host Cache Table.

rcIpv6MLDHostCacheEntry row .1.3.6.1.4.1.2272.1.62.1.1.17.1

The entry for the IPv6 MLD Host Cache Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6MLDHostCacheIfIndex Interface number for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.62.1.1.17.1.1
rcIpv6MLDHostCacheGrpAddress Group Address for an IPv6 MLD Host Cache Entry.	IPV6-TCIpv6Address Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.62.1.1.17.1.2
rcIpv6MLDHostCacheGrpLocallyRegistered Group Locally Registered for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIInteger32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.62.1.1.17.1.3
rcIpv6MLDHostCacheGrpLastReporter Group Last Reporter Address for an IPv6 MLD Host Cache Entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.17.1.4
rcIpv6MLDHostCacheGrpUpTime Group Uptime for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.5
rcIpv6MLDHostCacheGrpExpiryTime Group Expiry Time for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.6
rcIpv6MLDHostCacheGrpFilterMode Group Filter Mode for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.62.1.1.17.1.7

rcTunnelXInetConfigTable

table

.1.3.6.1.4.1.2272.1.62.1.1.18 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTunnelXInetConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTunnelXInetConfigTable'

Copy

A table that containing information on configured tunnels.

rcTunnelXInetConfigEntry row .1.3.6.1.4.1.2272.1.62.1.1.18.1

An entry containing additional tunnel information. This
object augments tunnelInetConfigEntry.

Indexes

No indexes recorded

Column	Syntax	OID
rcTunnelXInetConfigStatus Indicates the tunnel status	Enumerationr/w Enumerated Values: 1 config 2 discover	.1.3.6.1.4.1.2272.1.62.1.1.18.1.1
rcTunnelXInetConfigMode Indicates the tunnel mode	Enumerationr/w	.1.3.6.1.4.1.2272.1.62.1.1.18.1.2

rcIpv6RouteExtensionTable

table

.1.3.6.1.4.1.2272.1.62.1.1.19 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RouteExtensionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RouteExtensionTable'

Copy

This entity's IPV6 Routing table.

rcIpv6RouteExtensionEntry row .1.3.6.1.4.1.2272.1.62.1.1.19.1

A route to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RouteExtensionNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.62.1.1.19.1.1
rcIpv6RouteExtensionProtocol The routing mechanism via which this route was learned.	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.19.1.2
rcIpv6RouteExtensionPathType Indicates IPv6 route path type: best, alternative, ECMP.	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.19.1.3

rcIpv6RoutePrefTable

table

.1.3.6.1.4.1.2272.1.62.1.1.20 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6RoutePrefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6RoutePrefTable'

Copy

IPv6 Route Pref table. This table and
rcIpNewRoutePrefTable is designed
to obsolete the rcIpRoutePrefTable

rcIpv6RoutePrefEntry row .1.3.6.1.4.1.2272.1.62.1.1.20.1

An entry of Ipv6 Route Pref Table.

Indexes

rcIsisLSPLevel rcIsisLSPID

Column	Syntax	OID
rcIpv6RoutePrefDefaultValue Shows the default preference value for the given protocol.	Integer32 Enumerated Values: 1 area 2 domain	.1.3.6.1.4.1.2272.1.62.1.1.20.1.1
rcIpv6RoutePrefProtocol Protocol name	Enumeration Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.62.1.1.20.1.2
rcIpv6RoutePrefConfiguredValue This value is configurable by the user	Integer32r/w	.1.3.6.1.4.1.2272.1.62.1.1.20.1.3

rcIpv6FhsSnoopTable

table

.1.3.6.1.4.1.2272.1.62.1.1.21 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpv6FhsSnoopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpv6FhsSnoopTable'

Copy

This table contains the entries which are snooped by different methods.

rcIpv6FhsSnoopEntry row .1.3.6.1.4.1.2272.1.62.1.1.21.1

An entry containing a learned DHCPv6 binding.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6FhsSnoopVlanId The VLAN to which the snooped entry belongs.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.62.1.1.21.1.1
rcIpv6FhsSnoopIpv6Address The IPv6 address assigned to this IPv6 host.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.21.1.2
rcIpv6FhsSnoopMacAddress The MAC address of the snooped entry.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.62.1.1.21.1.3
rcIpv6FhsSnoopInterfaceIndex The interface to which the entry is learnt.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.21.1.4
rcIpv6FhsSnoopEntryType Indicates the type of entry - static (1) or dynamic (2).	Enumeration Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.62.1.1.21.1.5
rcIpv6FhsSnoopEntrySource Indicates the method entry was learnt from - static (1) or dhcp (2).	Enumeration	.1.3.6.1.4.1.2272.1.62.1.1.21.1.6
rcIpv6FhsSnoopValidTime The valid time for the snooped entry.	secondsSNMPv2-SMIUnsigned32 Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.62.1.1.21.1.7
rcIpv6FhsSnoopTimeToExpiry The time to expiry of the snooped entry.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.21.1.8
rcIpv6FhsSnoopRowStatus Row status to create/delete snooped entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.21.1.9

rcIsisCircuitTable

table

.1.3.6.1.4.1.2272.1.63.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisCircuitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisCircuitTable'

Copy

Table of IS-IS Circuit, this is extension
to the isisCircTable defined in ISIS MIB

rcIsisCircuitEntry row .1.3.6.1.4.1.2272.1.63.2.1

An entry of rcIsisCircuit Table. A Entry in
table exists for each ISIS circuit created

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisCircuitIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	Integer32	.1.3.6.1.4.1.2272.1.63.2.1.1
rcIsisCircuitType ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type	Enumerationr/w	.1.3.6.1.4.1.2272.1.63.2.1.2
rcIsisCircuitAuthType Authentication type for IIH to be sent/reveived on the circuit/interface	Enumerationr/w	.1.3.6.1.4.1.2272.1.63.2.1.3
rcIsisCircuitKeyId Authentication key id related to IIH key This can be set only if the auth-type is hmac-md5	Integer32r/w	.1.3.6.1.4.1.2272.1.63.2.1.4
rcIsisCircuitAuthKey Authentication key to be used to authenticate IIH sent/reveived on the circuit/interface	OctetStringr/w	.1.3.6.1.4.1.2272.1.63.2.1.5
rcIsisCircuitAddr IP address associated with the interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.2.1.6
rcIsisCircuitMask IP mask associated with the interface	SNMPv2-SMIIpAddress Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.2.1.7
rcIsisCircuitOperState This variable tells the operating state of circ	Enumeration Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.2.1.8
rcIsisCircuitNumAdj Number of adjacencies	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.2.1.9
rcIsisCircuitNumUpAdj Number of adjancencies which are UP	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.2.1.10

rcIsisPlsbTable

table

.1.3.6.1.4.1.2272.1.63.4 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbTable'

Copy

Table of PLSB under IS-IS

rcIsisPlsbEntry row .1.3.6.1.4.1.2272.1.63.4.1

An entry of rcIsisPlsb Table. A Entry in
table exists for each plsb instance created

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbId PLSB instance ID	Integer32	.1.3.6.1.4.1.2272.1.63.4.1.1
rcIsisPlsbRowStatus The state of the rcIsisPlsbEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.4.1.2
rcIsisPlsbNodeNickName PLSB node's nickname is used to calculate ISID multicast mac address.	r/w Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.4.1.3
rcIsisPlsbVlans PLSB ISIS vlans for a PLSB instance.	OctetStringr/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.4.1.4
rcIsisPlsbLsdbTrap isis PLSB lsdb update trap enable on this plsb instance	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.5
rcIsisPlsbState enable/disable PLSB.	EnableValuer/w Constraints: range: 1-16777215 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.6
rcIsisPlsbIpShortcut ISIS PLSB IP shortcut enabled	EnableValuer/w Constraints: range: 1-16777215 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.7
rcIsisPlsbPrimaryVlan Primary Vlan Id for this plsb instance.	Integer32r/w Enumerated Values: 1 config 2 discover	.1.3.6.1.4.1.2272.1.63.4.1.8
rcIsisPlsbSmltSplitBEB ISIS PLSB SMLT split BEB for this plsb instance.	Enumeration	.1.3.6.1.4.1.2272.1.63.4.1.9
rcIsisPlsbSmltBmac ISIS PLSB SMLT virtual MAC for this plsb instance.	SNMPv2-TCMacAddressr/w Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.4.1.10
rcIsisPlsbSmltPeerSysId ISIS PLSB SMLT Peer's system-id for this plsb instance.	IsisSystemIDr/w Type Constraints: range: 6	.1.3.6.1.4.1.2272.1.63.4.1.11
rcIsisPlsbMcast ISIS PLSB Multicast enable	EnableValuer/w Constraints: range: 0-64 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.12
rcIsisPlsbMcastFwdCacheTimeout Multicast Fwd Cache Timeout in seconds	Integer32r/w	.1.3.6.1.4.1.2272.1.63.4.1.13
rcIsisPlsbIpv6Shortcut ISIS PLSB IPv6 shortcut enabled	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.14
rcIsisPlsbMcastSpbPimGwControllerEnable ISIS PLSB Multicast SPB PIM Gateway controller enable/disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.4.1.15
rcIsisPlsbMcastSpbPimGwGatewayEnable ISIS PLSB Multicast SPB PIM Gateway enable/disable.	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.4.1.16

rcIsisCircuitPlsbTable

table

.1.3.6.1.4.1.2272.1.63.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisCircuitPlsbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisCircuitPlsbTable'

Copy

Table of IS-IS Circuit PLSB instance

rcIsisCircuitPlsbEntry row .1.3.6.1.4.1.2272.1.63.5.1

An entry of rcIsisCircuitPlsb Table. A Entry in
table exists for each PLSB instance under a ISIS
circuit created

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisCircuitPlsbIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	InterfaceIndexOrZero Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.5.1.1
rcIsisCircuitPlsbId PLSB instance ID	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.5.1.2
rcIsisCircuitPlsbRowStatus The state of the rcIsisCircuitPlsbEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.5.1.3
rcIsisCircuitPlsbState PLSB functionality enable on this Plsb instance at this port	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.5.1.4
rcIsisCircuitPlsbType ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type	Enumerationr/w	.1.3.6.1.4.1.2272.1.63.5.1.5
rcIsisCircuitPlsbL1Metric The metric value of this circuit for this level.	IsisDefaultL1Metricr/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.5.1.6
rcIsisCircuitPlsbWideL1Metric The metric value of this circuit for this level.	IsisWideL1Metricr/w Enumerated Values: 1 primary 2 secondary Type Constraints: range: 1..16777215	.1.3.6.1.4.1.2272.1.63.5.1.7

rcIsisPlsbUnicastFibTable

table obsolete

.1.3.6.1.4.1.2272.1.63.6 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbUnicastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbUnicastFibTable'

Copy

Table of IS-IS PLSB Unicast FIB

rcIsisPlsbUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.6.1

An entry of rcIsisPlsbUnicastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbUnicastFibDestinationMacAddrobsolete Destination Mac Address of the unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.6.1.1
rcIsisPlsbUnicastFibVlanobsolete Vlan of the unicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.6.1.2
rcIsisPlsbUnicastFibSysIdobsolete System ID of the node where unicast FIB entry come from	OctetString	.1.3.6.1.4.1.2272.1.63.6.1.3
rcIsisPlsbUnicastFibOutgoingPortobsolete Outgoing port of the unicast Fib entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.6.1.4

rcIsisPlsbMulticastFibTable

table obsolete

.1.3.6.1.4.1.2272.1.63.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbMulticastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbMulticastFibTable'

Copy

Table of IS-IS PLSB Multicast FIB

rcIsisPlsbMulticastFibEntry row .1.3.6.1.4.1.2272.1.63.7.1

An entry of rcIsisPlsbmulticastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbMulticastFibMcastDestMacAddrobsolete Multicast destination Mac Address of the multicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.7.1.1
rcIsisPlsbMulticastFibVlanobsolete Vlan of the multicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.7.1.2
rcIsisPlsbMulticastFibSysIdobsolete System ID of the node where multicast FIB entry come from	OctetString	.1.3.6.1.4.1.2272.1.63.7.1.3
rcIsisPlsbMulticastFibIsidobsolete Isid id of the multicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.7.1.4
rcIsisPlsbMulticastFibOutgoingPortsobsolete Nni port of the multicast Fib entry.	SNMPv2-TCDisplayString Enumerated Values: 1 primary 2 secondary Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.7.1.5

rcIsisPlsbIsidTable

table obsolete

.1.3.6.1.4.1.2272.1.63.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbIsidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbIsidTable'

Copy

Table of IS-IS PLSB ISID

rcIsisPlsbIsidEntry row .1.3.6.1.4.1.2272.1.63.8.1

An entry of rcIsisPlsbIsid Table. A Entry in
table exists for each PLSB i-sid configed or discovered
by IS-IS

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbIsidSourceNameobsolete nick name of node where this i-sid got configed or discovered	Integer32	.1.3.6.1.4.1.2272.1.63.8.1.1
rcIsisPlsbIsidIdobsolete IS-IS PLSB Isid id	Integer32	.1.3.6.1.4.1.2272.1.63.8.1.2
rcIsisPlsbIsidSysIdobsolete System ID of the node where multicast FIB entry come from	OctetString	.1.3.6.1.4.1.2272.1.63.8.1.3
rcIsisPlsbIsidTypeobsolete PLSB i-sid type	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.8.1.4

rcIsisAdjTable

table

.1.3.6.1.4.1.2272.1.63.10 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisAdjTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisAdjTable'

Copy

Table of IS-IS Adjacency, this is extension
to the isisISAdjTable defined in ISIS MIB

rcIsisAdjEntry row .1.3.6.1.4.1.2272.1.63.10.1

An entry of rcIsisAdj Table. A Entry in
table exists for each ISIS adjacency

Indexes

rcIsisSpbmUniIsid rcIsisSpbmUniPort rcIsisSpbmUniVlan

Column	Syntax	OID
rcIsisAdjCircIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.10.1.1
rcIsisAdjIndex A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created.	Unsigned32	.1.3.6.1.4.1.2272.1.63.10.1.2
rcIsisAdjHostName The hostname listed in LSP, or the system name if host name is not configured.	OctetString Constraints: range: 1-4095	.1.3.6.1.4.1.2272.1.63.10.1.3
rcIsisAdjIfIndex The value of ifIndex for the interface to which this circuit corresponds.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.10.1.4

rcIsisLSPTable

table

.1.3.6.1.4.1.2272.1.63.11 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisLSPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisLSPTable'

Copy

Table of IS-IS LSP, this is extension
to the isisLSPSummaryTable defined in ISIS MIB

rcIsisLSPEntry row .1.3.6.1.4.1.2272.1.63.11.1

An entry of rcIsisLSP Table. A Entry in
table exists for each ISIS LSP

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisLSPLevel At which level does this LSP appear?	Enumeration	.1.3.6.1.4.1.2272.1.63.11.1.1
rcIsisLSPID The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number.	OctetString	.1.3.6.1.4.1.2272.1.63.11.1.2
rcIsisLSPSeq The sequence number for this LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.63.11.1.3
rcIsisLSPHostName The hostname listed in LSP, or the system name if host name is not configured.	OctetString Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.11.1.4
rcIsisLSPNickName PLSB node's nickname	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.11.1.5
rcIsisLSPLifetimeRemain The remaining lifetime in seconds for this LSP.	secondsSNMPv2-SMIUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.11.1.6
rcIsisLSPSmltBmac SPBM node's SMLT virtual BMAC	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.11.1.7

rcIsisPlsbIpUnicastFibTable

table obsolete

.1.3.6.1.4.1.2272.1.63.12 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbIpUnicastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbIpUnicastFibTable'

Copy

Table of IS-IS PLSB IP Unicast FIB. This table has been
replaced by rcIsisPlsbIpInterIsidUnicastFibTable.

rcIsisPlsbIpUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.12.1

An entry of rcIsisPlsbIpUnicastFib Table. A Entry in
table exists for each PLSB IP unicast forwarding entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbIpUnicastFibVrfId VRF ID of the IP unicast FIB entry, 0 indicates NRE.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.12.1.1
rcIsisPlsbIpUnicastFibDestinationIpAddrType The address type of destination IP Address.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 routed 2 snoop	.1.3.6.1.4.1.2272.1.63.12.1.2
rcIsisPlsbIpUnicastFibDestinationIpAddr Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16)	OctetString	.1.3.6.1.4.1.2272.1.63.12.1.3
rcIsisPlsbIpUnicastFibDestinationMask Destination IP mask of the IP unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.63.12.1.4
rcIsisPlsbIpUnicastFibNextHopBmac the nexthop BMAC of the IP unicast FIB entry	SNMPv2-TCMacAddress Constraints: range: 0-64 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.12.1.5
rcIsisPlsbIpUnicastFibVlan Vlan of the IP unicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.12.1.6
rcIsisPlsbIpUnicastFibIsid ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.12.1.7
rcIsisPlsbIpUnicastFibNextHopName the nexthop hostname of the IP unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.12.1.8
rcIsisPlsbIpUnicastFibOutgoingPort Outgoing port of the IP unicast Fib entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.12.1.9
rcIsisPlsbIpUnicastFibPrefixCost prefix cost of the IP unicast FIB entry	SNMPv2-SMIInteger32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.12.1.10
rcIsisPlsbIpUnicastFibSpbmCost bmac cost of the IP unicast FIB entry	SNMPv2-SMICounter64 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.12.1.11

rcIsisPlsbUcastFibTable

table

.1.3.6.1.4.1.2272.1.63.13 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbUcastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbUcastFibTable'

Copy

Table of IS-IS PLSB Unicast FIB

rcIsisPlsbUcastFibEntry row .1.3.6.1.4.1.2272.1.63.13.1

An entry of rcIsisPlsbUcastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbUcastFibSysId System ID of the node where unicast FIB entry come from	OctetString	.1.3.6.1.4.1.2272.1.63.13.1.1
rcIsisPlsbUcastFibVlan Vlan of the unicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.13.1.2
rcIsisPlsbUcastFibDestinationMacAddr Destination Mac Address of the unicast FIB entry	SNMPv2-TCMacAddress Constraints: range: 0-512 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.13.1.3
rcIsisPlsbUcastFibOutgoingPort Outgoing port of the unicast Fib entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.13.1.4
rcIsisPlsbUcastFibHostName Host name of the node where unicast FIB entry come from	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.63.13.1.5
rcIsisPlsbUcastFibCost unicast FIB cost	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.13.1.6

rcIsisPlsbMcastFibTable

table

.1.3.6.1.4.1.2272.1.63.14 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbMcastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbMcastFibTable'

Copy

Table of IS-IS PLSB Multicast FIB

rcIsisPlsbMcastFibEntry row .1.3.6.1.4.1.2272.1.63.14.1

An entry of rcIsisPlsbMcastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbMcastFibSysId System ID of the node where multicast FIB entry come from	OctetString Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.14.1.1
rcIsisPlsbMcastFibVlan Vlan of the multicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.14.1.2
rcIsisPlsbMcastFibMcastDestMacAddr Multicast destination Mac Address of the multicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.14.1.3
rcIsisPlsbMcastFibIsid Isid id of the multicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.14.1.4
rcIsisPlsbMcastFibNickName nick name of node where this i-sid got configured or discovered	Integer32	.1.3.6.1.4.1.2272.1.63.14.1.5
rcIsisPlsbMcastFibType PLSB i-sid type	Enumeration	.1.3.6.1.4.1.2272.1.63.14.1.6
rcIsisPlsbMcastFibOutgoingPortsobsolete Nni port of the multicast Fib entry. This attribute is obsoleted. New attributes rcIsisPlsbMcastFibOutgoingInterfacePorts and rcIsisPlsbMcastFibOutgoingInterfaceMlts are added for outgoing interfaces	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.14.1.7
rcIsisPlsbMcastFibHostName Host name of the node where multicast FIB entry come from	OctetString Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.2272.1.63.14.1.8
rcIsisPlsbMcastFibOutgoingInterfacePorts port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the …	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.14.1.9
rcIsisPlsbMcastFibOutgoingInterfaceMlts mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 whic…	OctetString	.1.3.6.1.4.1.2272.1.63.14.1.10
rcIsisPlsbMcastFibIncomingInterface Incoming interface (port or mlt) of the multicast Fib entry.	InterfaceIndex Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.63.14.1.11

rcIsisPlsbNodeTable

table

.1.3.6.1.4.1.2272.1.63.15 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbNodeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbNodeTable'

Copy

Table of IS-IS PLSB Node

rcIsisPlsbNodeEntry row .1.3.6.1.4.1.2272.1.63.15.1

An entry of rcIsisPlsbNode Table. A Entry in
table exists for each node running PLSB ISIS
in the setup.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbNodeSysId System ID of the PLSB node entry	OctetString	.1.3.6.1.4.1.2272.1.63.15.1.1
rcIsisPlsbNodePrimaryParentSysId System ID of parent node of the PLSB node entry for primary bvlan	OctetString	.1.3.6.1.4.1.2272.1.63.15.1.2
rcIsisPlsbNodePrimaryBvlan spbm primary b-vlan	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.15.1.3
rcIsisPlsbNodeSecondaryParentSysId System ID of parent node of the PLSB node entry for secondary bvlan	OctetString Constraints: range: 1-4084	.1.3.6.1.4.1.2272.1.63.15.1.4
rcIsisPlsbNodeSecondaryBvlan spbm secondary b-vlan	Integer32	.1.3.6.1.4.1.2272.1.63.15.1.5

rcIsisSpbmPortDropStatsTable

table

.1.3.6.1.4.1.2272.1.63.16 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmPortDropStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmPortDropStatsTable'

Copy

Table of IS-IS SPBM port drop-stats by
port index and SPBM b-vlan

rcIsisSpbmPortDropStatsEntry row .1.3.6.1.4.1.2272.1.63.16.1

SPBM port based frame drop counters.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmPortDropStatsPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.16.1.1
rcIsisSpbmPortDropStatsVlanId A value that uniquely identifies the SPBM Virtual LAN associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.63.16.1.2
rcIsisSpbmPortDropStatsVlanType Indicates the type of SPBM bvlan	Enumeration	.1.3.6.1.4.1.2272.1.63.16.1.3
rcIsisSpbmPortDropStatsUnknownUcastSrcAddr The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.4
rcIsisSpbmPortDropStatsRpfcUcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.16.1.5
rcIsisSpbmPortDropStatsUnknownUcastDestAddr The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.6
rcIsisSpbmPortDropStatsUnknownMcastDestAddr The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.7
rcIsisSpbmPortDropStatsRpfcMcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.16.1.8
rcIsisSpbmPortDropStatsLastDropMac The DA or SA last dropped on SPBM bvlan.	SNMPv2-TCMacAddress Constraints: range: 0-255 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.16.1.9
rcIsisSpbmPortDropStatsIsMacDestAddr The last dropped mac on SPBM bvlan is DA or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.16.1.10
rcIsisSpbmPortDropStatsLastDropMacHostName The host name of the nodes where last dropped SA or DA on SPBM bvlan belongs	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.16.1.11

rcIsisSpbmSrcAddrDropStatsTable

table

.1.3.6.1.4.1.2272.1.63.17 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmSrcAddrDropStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmSrcAddrDropStatsTable'

Copy

Table of IS-IS SPBM SA drop-stats by
Source Address and SPBM b-vlan

rcIsisSpbmSrcAddrDropStatsEntry row .1.3.6.1.4.1.2272.1.63.17.1

SPBM Source Address based frame drop counters.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmSrcAddrDropStatsAddr The source MAC of the drop packet.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.17.1.1
rcIsisSpbmSrcAddrDropStatsVlanId A value that uniquely identifies the SPBM Virtual LAN associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.63.17.1.2
rcIsisSpbmSrcAddrDropStatsVlanType Indicates the type of SPBM bvlan	Enumeration Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.17.1.3
rcIsisSpbmSrcAddrDropStatsRpfcUcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.4
rcIsisSpbmSrcAddrDropStatsUnknownUcastDestAddr The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.5
rcIsisSpbmSrcAddrDropStatsRpfcMcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.17.1.6
rcIsisSpbmSrcAddrDropStatsUnknownMcastDestAddr The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.7
rcIsisSpbmSrcAddrDropStatsUnknownUcastSrcAddr The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.8
rcIsisSpbmSrcAddrDropStatsHostName The host name of the nodes where last on SPBM bvlan belongs	OctetString Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.17.1.9

rcIsisSpbmUniTable

table

.1.3.6.1.4.1.2272.1.63.18 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmUniTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmUniTable'

Copy

Table containing information about
defined I-SIDs and their current
use on the platform from an SPBM
perspective.

rcIsisSpbmUniEntry row .1.3.6.1.4.1.2272.1.63.18.1

An rcIsisSpbmUniTable entry. An
entry exists for each I-SID that
is currently defined. Entry instance
data indicates current I-SID usage
from a UNI perspective as follows:

Port VLAN ID UNI T…

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmUniIsid The I-SID key for this entry.	Integer32	.1.3.6.1.4.1.2272.1.63.18.1.1
rcIsisSpbmUniPort A port that is associated with the I-SID key for this entry. A value equal to 0 indicates that a port is not associated with the entry I-SID key, meaning that the entry represents a C-VLAN UNI mapping.	InterfaceIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.18.1.2
rcIsisSpbmUniVlan A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. A value equal to 4095 indicates that a VLAN is not ass…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.63.18.1.3
rcIsisSpbmUniRowStatus This is used to control creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.18.1.4
rcIsisSpbmUniStorage This object retrieves the storage type for this entry.	SNMPv2-TCStorageType Enumerated Values: 1 layer2 2 ip Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.63.18.1.5

rcIsisSpbmIpMcastRouteTable

table obsolete

.1.3.6.1.4.1.2272.1.63.19 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmIpMcastRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmIpMcastRouteTable'

Copy

SPBM IP Multicast Route Table
This table has been replaced by the 
rcIsisSpbmIpIsidMcastRouteTable.

rcIsisSpbmIpMcastRouteEntry row .1.3.6.1.4.1.2272.1.63.19.1

SPBM IP Multicast Route Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmIpMcastGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 512-512	.1.3.6.1.4.1.2272.1.63.19.1.1
rcIsisSpbmIpMcastSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 2-4059	.1.3.6.1.4.1.2272.1.63.19.1.2
rcIsisSpbmIpMcastVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.63.19.1.3
rcIsisSpbmIpMcastNickName Multicast nick name	Integer32	.1.3.6.1.4.1.2272.1.63.19.1.4
rcIsisSpbmIpMcastSourceBeb Source Backbone Edge Bridge name	OctetString	.1.3.6.1.4.1.2272.1.63.19.1.5
rcIsisSpbmIpMcastVlanId VLAN ID of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.19.1.6
rcIsisSpbmIpMcastVrfName VRF name of the interface	OctetString Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.19.1.7
rcIsisSpbmIpMcastDataIsid Data ISID	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.63.19.1.8
rcIsisSpbmIpMcastNniPortsobsolete List of NNI ports. This attribute is obsoleted. New attributes rcIsisSpbmIpMcastNniInterfacePorts and rcIsisSpbmIpMcastNniInterfaceMlts are added for nni interfaces	OctetString	.1.3.6.1.4.1.2272.1.63.19.1.9
rcIsisSpbmIpMcastType Indicates the type of the interface	Enumeration	.1.3.6.1.4.1.2272.1.63.19.1.10
rcIsisSpbmIpMcastBvlan Backbone VLAN on which SPB traffic is carried	SNMPv2-SMIInteger32 Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.19.1.11
rcIsisSpbmIpMcastNniInterfacePorts list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the value zero(0), the c…	PortSet Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.19.1.12
rcIsisSpbmIpMcastNniInterfaceMlts list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 which represents Mlt Id …	OctetString	.1.3.6.1.4.1.2272.1.63.19.1.13

rcIsisSpbmIpMcastRouteUniRcvrsTable

table obsolete

.1.3.6.1.4.1.2272.1.63.20 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmIpMcastRouteUniRcvrsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmIpMcastRouteUniRcvrsTable'

Copy

SPBM IP Multicast Route UNI Receivers Table
This table has been replaced by the
rcIsisSpbmIpIsidMcastRouteUniRcvrsTable.

rcIsisSpbmIpMcastRouteUniRcvrsEntry row .1.3.6.1.4.1.2272.1.63.20.1

SPBM IP Multicast Route UNI Receivers Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmIpMcastUniRcvrsGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.20.1.1
rcIsisSpbmIpMcastUniRcvrsSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.20.1.2
rcIsisSpbmIpMcastUniRcvrsVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.20.1.3
rcIsisSpbmIpMcastUniRcvrsNickName Multicast nick name	Integer32	.1.3.6.1.4.1.2272.1.63.20.1.4
rcIsisSpbmIpMcastUniRcvrsEgressVlan The Vlan associated with this egress entry.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.20.1.5
rcIsisSpbmIpMcastUniRcvrsEgressActivePorts The set of ports in the vlan that have UNI receivers for this multicast route.	PortSet Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.63.20.1.6

rcIsisPlsbIpInterIsidUnicastFibTable

table

.1.3.6.1.4.1.2272.1.63.21 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbIpInterIsidUnicastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbIpInterIsidUnicastFibTable'

Copy

Table of IS-IS PLSB IP Inter Isid Unicast FIB.
This table will replace rcIsisPlsbIpUnicastFibTable

rcIsisPlsbIpInterIsidUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.21.1

An entry of rcIsisPlsbIpInterIsidUnicastFib Table.
An Entry table exists for each PLSB IP unicast
forwarding entry.

Indexes

rcIsisLogicalInterfaceNextHopId rcIsisLogicalInterfaceNextHopIp

Column	Syntax	OID
rcIsisPlsbIpInterIsidUnicastFibVrfId VRF ID of the IP unicast FIB entry, 0 indicates NRE.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.63.21.1.1
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType The address type of destination IP Address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.63.21.1.2
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16)	OctetString	.1.3.6.1.4.1.2272.1.63.21.1.3
rcIsisPlsbIpInterIsidUnicastFibDestinationMask Destination IP mask of the IP unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.21.1.4
rcIsisPlsbIpInterIsidUnicastFibNextHopBmac The nexthop BMAC of the IP unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.21.1.5
rcIsisPlsbIpInterIsidUnicastFibDestIsid Destination ISID of the IP unicast FIB entry	Integer32	.1.3.6.1.4.1.2272.1.63.21.1.6
rcIsisPlsbIpInterIsidUnicastFibVlan Vlan of the IP unicast FIB entry. The value of 0 is associated with a local Inter VSN circuitless IP interface fib entry.	Integer32	.1.3.6.1.4.1.2272.1.63.21.1.7
rcIsisPlsbIpInterIsidUnicastFibIsid ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.8
rcIsisPlsbIpInterIsidUnicastFibNextHopName The nexthop hostname of the IP unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.21.1.9
rcIsisPlsbIpInterIsidUnicastFibOutgoingPort Outgoing port of the IP unicast Fib entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.10
rcIsisPlsbIpInterIsidUnicastFibPrefixCost prefix cost of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.11
rcIsisPlsbIpInterIsidUnicastFibSpbmCost Bmac cost of the IP unicast FIB entry	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.21.1.12
rcIsisPlsbIpInterIsidUnicastFibPreference IP Route preference of the IP unicast FIB entry	SNMPv2-SMIInteger32 Constraints: range: 1-500	.1.3.6.1.4.1.2272.1.63.21.1.13
rcIsisPlsbIpInterIsidUnicastFibMetricType IP Metric Type of the IP unicast FIB entry	Enumeration	.1.3.6.1.4.1.2272.1.63.21.1.14

rcIsisPlsbIpv6UnicastFibTable

table

.1.3.6.1.4.1.2272.1.63.23 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisPlsbIpv6UnicastFibTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisPlsbIpv6UnicastFibTable'

Copy

Table of IS-IS PLSB IPV6 Unicast FIB

rcIsisPlsbIpv6UnicastFibEntry row .1.3.6.1.4.1.2272.1.63.23.1

An entry of rcIsisPlsbIpv6UnicastFib Table. A Entry in
table exists for each PLSB IPV6 unicast forwarding entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisPlsbIpv6UnicastFibVrfId VRF ID of the IPV6 unicast FIB entry, 0 indicates NRE.	Integer32 Enumerated Values: 0 none 1 local 2 peer	.1.3.6.1.4.1.2272.1.63.23.1.1
rcIsisPlsbIpv6UnicastFibDestinationIpAddrType The address type of destination IPV6 Address.	INET-ADDRESS-MIBInetAddressType Constraints: range: 1-500 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.63.23.1.2
rcIsisPlsbIpv6UnicastFibDestinationIpAddr Destination IP Address of the IPV6 unicast FIB entry.	OctetString	.1.3.6.1.4.1.2272.1.63.23.1.3
rcIsisPlsbIpv6UnicastFibDestinationMask Destination IP mask of the IPV6 unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Constraints: range: 0-0 range: 10-65535	.1.3.6.1.4.1.2272.1.63.23.1.4
rcIsisPlsbIpv6UnicastFibNextHopBmac the nexthop BMAC of the IPV6 unicast FIB entry	SNMPv2-TCMacAddress Enumerated Values: 1 none 2 monitoring 3 blocking Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.23.1.5
rcIsisPlsbIpv6UnicastFibDestIsid Destination ISID of the IPv6 unicast FIB entry	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.63.23.1.6
rcIsisPlsbIpv6UnicastFibVlan Vlan of the IPV6 unicast FIB entry	Integer32 Constraints: range: 1-21600	.1.3.6.1.4.1.2272.1.63.23.1.7
rcIsisPlsbIpv6UnicastFibIsid ISID of the IPV6 unicast FIB entry	SNMPv2-SMIInteger32 Constraints: range: 1-21600	.1.3.6.1.4.1.2272.1.63.23.1.8
rcIsisPlsbIpv6UnicastFibNextHopName the nexthop hostname of the IPV6 unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.23.1.9
rcIsisPlsbIpv6UnicastFibOutgoingPort Outgoing port of the IPV6 unicast Fib entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.10
rcIsisPlsbIpv6UnicastFibPrefixCost prefix cost of the IPV6 unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.11
rcIsisPlsbIpv6UnicastFibSpbmCost bmac cost of the IPV6 unicast FIB entry	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.23.1.12

rcIsisSpbmIpIsidMcastRouteTable

table

.1.3.6.1.4.1.2272.1.63.24 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmIpIsidMcastRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmIpIsidMcastRouteTable'

Copy

SPBM IP Isid Multicast Route Table

rcIsisSpbmIpIsidMcastRouteEntry row .1.3.6.1.4.1.2272.1.63.24.1

SPBM IP Isid Multicast Route Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmIpIsidMcastVsnIsid Virtual Services Network ISID	Integer32 Enumerated Values: 1 singleConnection 2 perSessionConnection	.1.3.6.1.4.1.2272.1.63.24.1.1
rcIsisSpbmIpIsidMcastGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Enumerated Values: 1 connected 2 notConnected Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.24.1.2
rcIsisSpbmIpIsidMcastSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 10-30	.1.3.6.1.4.1.2272.1.63.24.1.3
rcIsisSpbmIpIsidMcastNickName Multicast nick name	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.63.24.1.4
rcIsisSpbmIpIsidMcastSourceBeb Source Backbone Edge Bridge name	OctetString	.1.3.6.1.4.1.2272.1.63.24.1.5
rcIsisSpbmIpIsidMcastVlanId VLAN ID of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.24.1.6
rcIsisSpbmIpIsidMcastVrfName VRF name of the interface	OctetString	.1.3.6.1.4.1.2272.1.63.24.1.7
rcIsisSpbmIpIsidMcastDataIsid Data ISID	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.63.24.1.8
rcIsisSpbmIpIsidMcastType Indicates the type of the interface	Enumeration	.1.3.6.1.4.1.2272.1.63.24.1.9
rcIsisSpbmIpIsidMcastBvlan Backbone VLAN on which SPB traffic is carried	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.24.1.10
rcIsisSpbmIpIsidMcastNniInterfacePorts list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the value zero(0), the …	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.24.1.11
rcIsisSpbmIpIsidMcastNniInterfaceMlts list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 which represents Mlt Id …	OctetString Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.63.24.1.12

rcIsisSpbmIpIsidMcastRouteUniRcvrsTable

table

.1.3.6.1.4.1.2272.1.63.25 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmIpIsidMcastRouteUniRcvrsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmIpIsidMcastRouteUniRcvrsTable'

Copy

SPBM IP Isid Multicast Route UNI Receivers Table

rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry row .1.3.6.1.4.1.2272.1.63.25.1

SPBM IP Isid Multicast Route UNI Receivers Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 10-3600	.1.3.6.1.4.1.2272.1.63.25.1.1
rcIsisSpbmIpIsidMcastUniRcvrsGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.25.1.2
rcIsisSpbmIpIsidMcastUniRcvrsSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Constraints: range: 60-3600	.1.3.6.1.4.1.2272.1.63.25.1.3
rcIsisSpbmIpIsidMcastUniRcvrsNickName Multicast nick name	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.2272.1.63.25.1.4
rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan The Vlan associated with this egress entry.	Integer32	.1.3.6.1.4.1.2272.1.63.25.1.5
rcIsisSpbmIpIsidMcastUniRcvrsEgressActivePorts The set of ports in the vlan that have UNI receivers for this multicast route.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.25.1.6

rcIsisLogicalInterfaceTable

table

.1.3.6.1.4.1.2272.1.63.26 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisLogicalInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisLogicalInterfaceTable'

Copy

The table of ISIS logical interface.

rcIsisLogicalInterfaceEntry row .1.3.6.1.4.1.2272.1.63.26.1

Entry contains the configuration information about the logical isis interface

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisLogicalInterfaceId An index used to uniquely identify this logical interface.	Integer32	.1.3.6.1.4.1.2272.1.63.26.1.1
rcIsisLogicalInterfaceIfIndex The ISIS logical ifIndex	InterfaceIndex Enumerated Values: 1 udp 2 tcp 3 sctp Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.26.1.2
rcIsisLogicalInterfaceType Indicates the entry is for Layer2 or Layer3	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.63.26.1.3
rcIsisLogicalInterfaceDestIPAddr The logical interface Destination IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.26.1.4
rcIsisLogicalInterfaceDestIfIndex The value of ifIndex for the interface to which this logical interface corresponds. It can be port/mlt ifindex.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.26.1.5
rcIsisLogicalInterfaceVids This bitfield is used to identify which VLANs this logical interface is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w Enumerated Values: 1 ipfix 2 preipfixv9 3 preipfixv5	.1.3.6.1.4.1.2272.1.63.26.1.6
rcIsisLogicalInterfacePrimaryVid Primary tunnel vlan associated with L2Core ISIS logical interface	Integer32r/w	.1.3.6.1.4.1.2272.1.63.26.1.7
rcIsisLogicalInterfaceName An administratively-assigned name for this Logical interface.	OctetStringr/w	.1.3.6.1.4.1.2272.1.63.26.1.8
rcIsisLogicalInterfaceRowStatus Used to create/delete logical interface	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.26.1.9
rcIsisLogicalInterfaceCircIndex An index used to identify ISIS circuit creating under the logical interface	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.63.26.1.10
rcIsisLogicalInterfaceNextHopIfIndexdeprecated Next hop destination ifindex to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestIfIndex	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.26.1.11
rcIsisLogicalInterfaceNextHopViddeprecated Next hop vlan id to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestVid	Integer32 Constraints: range: 1-100000	.1.3.6.1.4.1.2272.1.63.26.1.12
rcIsisLogicalInterfaceNextHopVrf Next hop vrf name to reach logical tunnel dest-ip	OctetString Constraints: range: 1025-16777215	.1.3.6.1.4.1.2272.1.63.26.1.13

rcIsisSpbmMcastFibUniTable

table

.1.3.6.1.4.1.2272.1.63.27 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisSpbmMcastFibUniTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisSpbmMcastFibUniTable'

Copy

IS-IS SPBM Multicast FIB Uni Table

rcIsisSpbmMcastFibUniEntry row .1.3.6.1.4.1.2272.1.63.27.1

IS-IS SPBM Multicast FIB Uni Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisSpbmMcastFibUniSysId System ID of the node where multicast FIB entry come from.	OctetString	.1.3.6.1.4.1.2272.1.63.27.1.1
rcIsisSpbmMcastFibUniVlan bVlan of the multicast FIB entry.	Integer32 Enumerated Values: 1 hashKeyOne 2 hashKeyTwo 3 hashKeyThree 4 hashKeyFour	.1.3.6.1.4.1.2272.1.63.27.1.2
rcIsisSpbmMcastFibUniMcastDestMacAddr Multicast destination Mac Address of the multicast FIB entry.	SNMPv2-TCMacAddress Constraints: range: 1-100000 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.27.1.3
rcIsisSpbmMcastFibUniCvid Customer vid of the multicast FIB entry. 4095 is not used. 4096 is reserved for untagged case.	Integer32	.1.3.6.1.4.1.2272.1.63.27.1.4
rcIsisSpbmMcastFibUniOutgoingInterfaceNniPorts nni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has …	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.5
rcIsisSpbmMcastFibUniOutgoingInterfaceNniMlts nni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 …	OctetString Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.63.27.1.6
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniPorts switched uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a…	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.7
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniMlts switched uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to…	OctetString	.1.3.6.1.4.1.2272.1.63.27.1.8
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniPorts platform cvlan uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. …	PortSet Enumerated Values: 1 clear Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.9
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniMlts platform cvlan uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth…	OctetString	.1.3.6.1.4.1.2272.1.63.27.1.10
rcIsisSpbmMcastFibUniCvlan platform customer vlan of the multicast FIB entry.	Integer32	.1.3.6.1.4.1.2272.1.63.27.1.11

rcIsisLogicalInterfaceNextHopTable

table

.1.3.6.1.4.1.2272.1.63.28 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsisLogicalInterfaceNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsisLogicalInterfaceNextHopTable'

Copy

The table to store nexthop information for the logical-interface tunnel

rcIsisLogicalInterfaceNextHopEntry row .1.3.6.1.4.1.2272.1.63.28.1

Entry contains the nexthop information for the logical interface tunnel

Indexes

No indexes recorded

Column	Syntax	OID
rcIsisLogicalInterfaceNextHopId An index used to uniquely identify the logical interface tunnel.This value is same as the rcIsisLogicalInterfaceId in the rcIsisLogicalInterfaceTable	Integer32	.1.3.6.1.4.1.2272.1.63.28.1.1
rcIsisLogicalInterfaceNextHopIp An index that uniquely identifies the next hop IP address of the logical interface tunnel	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.28.1.2
rcIsisLogicalInterfaceNextHopDestIfIndex Next hop destination ifindex to reach the next hop ip of logical interface tunnel	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.63.28.1.3
rcIsisLogicalInterfaceNextHopDestVid Next hop destination vlan id to reach the next hop ip of logical interface tunnel	Integer32	.1.3.6.1.4.1.2272.1.63.28.1.4

rcSlppVlanTable

table

.1.3.6.1.4.1.2272.1.64.1.1.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSlppVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSlppVlanTable'

Copy

Table of VLANs for which simple loop detection occur on.

rcSlppVlanEntry row .1.3.6.1.4.1.2272.1.64.1.1.2.1

SLPP VLAN entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSlppVlanVlanId Vlan id for which simple loop detection occurs on.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.64.1.1.2.1.1
rcSlppVlanSlppEnable Flag to indicate whether the VLAN entry is active or not for SLPP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.64.1.1.2.1.2
rcSlppVlanRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.64.1.1.2.1.3

rcSlppPortTable

table

.1.3.6.1.4.1.2272.1.64.1.1.3 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSlppPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSlppPortTable'

Copy

Table of ports for which simple loop detection occurs on.

rcSlppPortEntry row .1.3.6.1.4.1.2272.1.64.1.1.3.1

SLPP Port entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcSlppPortIfIndex Port on which simple loop detection occurs on.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.64.1.1.3.1.1
rcSlppPortPktRxThreshold Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown.	Integer32r/w	.1.3.6.1.4.1.2272.1.64.1.1.3.1.2
rcSlppPortSlppEnable Flag to indicate whether the port entry is active or not for SLPP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.64.1.1.3.1.3
rcSlppPortRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.64.1.1.3.1.4
rcSlppPortIncomingVlanId Vlan id of the classified packet on the port brought down by SLPP.	RcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.64.1.1.3.1.5
rcSlppPortSrcNodeType The src node type of the received slpp Pkt.	Enumeration Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.2272.1.64.1.1.3.1.6
rcSlppPortPktRxCount Total number of SLPP packets received on the port.	Integer32	.1.3.6.1.4.1.2272.1.64.1.1.3.1.7
rcSlppPortGuardEnable Flag to indicate if SLPP-guard is enabled on the port.	SNMPv2-TCTruthValuer/w Constraints: range: 0-16777215 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.64.1.1.3.1.8
rcSlppPortGuardTimeout This value specifies the time period for which a port will remain disabled. When SLPP-guard disables a port, after this time period expires, the port will become re-enabled. A value of 0 means ports will never be re-e…	Integer32r/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.2272.1.64.1.1.3.1.9
rcSlppPortGuardStatus The object indicates the SLPP-guard status of a port.	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.2272.1.64.1.1.3.1.10
rcSlppPortGuardTimerCount This value specifies the time period that has passed since a port was operationally disabled by SLPP-guard. When this object reaches the timeout value (rcSlppPortGuardTimeout), the port will become re-enabled.	Integer32	.1.3.6.1.4.1.2272.1.64.1.1.3.1.11
rcSlppPortTimeToClrPktRxCount Time to clear the SLPP Rx PDU counter. This has a default value of 21600 seconds. Once SLPP is enabled and port starts receiving SLPP PDUs, a timer is started and once the timer exceeds this configured value, rcSlppPort…	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.64.1.1.3.1.12
rcSlppPortRemainingTimeToClrPktRxCount Remaining time to clear the SLPP Rx PDU counter. It is calculated using rcSlppPortTimeToClrPktRxCount and has a granularity of 5 seconds.	secondsUnsigned32 Enumerated Values: 1 ospfv3Metric 2 comparableCost 3 nonComparable	.1.3.6.1.4.1.2272.1.64.1.1.3.1.13
rcSlppPortClearPktRxCount Clear the SLPP Rx PDU counter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.64.1.1.3.1.14

rcTacacsServerTable

table

.1.3.6.1.4.1.2272.1.65.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcTacacsServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcTacacsServerTable'

Copy

The (conceptual) table listing the TACACS+ servers with
which the client shares a secret.

rcTacacsServerEntry row .1.3.6.1.4.1.2272.1.65.2.1

An entry (conceptual row) representing a TACACS+ server
with which the client shares a secret.

Indexes

No indexes recorded

Column	Syntax	OID
rcTacacsServerAddressType Specifies the type of IP address used on the Tacacs+ server.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.65.2.1.1
rcTacacsServerAddress The IP address of the TACACS+ server referred to in this table entry.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.65.2.1.2
rcTacacsServerPortNumber The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.65.2.1.3
rcTacacsServerConnectionType Specifies TCP connection type between device and TACACS+ server. Either a single open connection between a device and server (SingleConnection), or open/close connection per communication session (PerSessionConnection).	Enumerationr/w	.1.3.6.1.4.1.2272.1.65.2.1.4
rcTacacsServerConnectionStatus Specifies status TCP connection type between device and TACACS+ server.	Enumeration	.1.3.6.1.4.1.2272.1.65.2.1.5
rcTacacsServerTimeout The maximum time (in seconds) to wait for this TACACS+ server to reply.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.65.2.1.6
rcTacacsServerKey Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used.	OctetStringr/w	.1.3.6.1.4.1.2272.1.65.2.1.7
rcTacacsServerSourceIpInterfaceEnabled Specifies whether source address specification is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.65.2.1.8
rcTacacsServerSourceIpInterfaceType Specifies the type of IP address used on the interface that connects to the Tacacs+ server. If this value is unknown(0), then a system-wide default value will be used.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.65.2.1.9
rcTacacsServerSourceIpInterface IP address of the interface to use with this server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.65.2.1.10
rcTacacsServerPriority Determines the order in which the TACACS+ servers will be used, when 1 is the highest priority. If more than one server share the same priority - they will be used in lexicographic order (the order of entries in this t…	Integer32r/w Enumerated Values: 8 linkLsa 8193 routerLink 8194 networkLink 8195 interAreaPrefix 8196 interAreaRouter 8199 type7 8201 intraAreaPrefix 16389 asExternal	.1.3.6.1.4.1.2272.1.65.2.1.11
rcTacacsServerRowStatus The row status variable, can be set to destroy or createAndGo.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.65.2.1.12

rcIpfixConfSlotTable

table

.1.3.6.1.4.1.2272.1.66.1.2.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpfixConfSlotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpfixConfSlotTable'

Copy

A table to store the configuration details for IPFIX for each
slot.  This table is indexed by slot number.

rcIpfixConfSlotEntry row .1.3.6.1.4.1.2272.1.66.1.2.1.1

One Entry holding IPFIX config information on slot basis.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpfixConfSlotNum Slot number	Integer32	.1.3.6.1.4.1.2272.1.66.1.2.1.1.1
rcIpfixConfSlotAgingIntv Flow record aging interval (Value in seconds).	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.66.1.2.1.1.2
rcIpfixConfSlotActiveTimeout Flow record active timeout value (Value in mins).	minutesInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.66.1.2.1.1.3
rcIpfixConfSlotExportIntv Frequency of flow export to collector (Value in sec).	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.66.1.2.1.1.4
rcIpfixConfSlotExportState State of exporter.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.66.1.2.1.1.5
rcIpfixConfSlotTempRefIntvSec Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first.	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.66.1.2.1.1.6
rcIpfixConfSlotTempRefIntvPkts Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first.	Integer32r/w	.1.3.6.1.4.1.2272.1.66.1.2.1.1.7

rcIpfixCollectorTable

table

.1.3.6.1.4.1.2272.1.66.1.2.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpfixCollectorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpfixCollectorTable'

Copy

Table to store the configuration details for IPFIX collector
for each slot.  This table is indexed by slot number and ip
address.

rcIpfixCollectorEntry row .1.3.6.1.4.1.2272.1.66.1.2.2.1

One entry holds IPFIX collector config information based on
slot info and collector ip address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpfixCollectorSlotNum Slot number. An index to the CollectorEntry.	Integer32	.1.3.6.1.4.1.2272.1.66.1.2.2.1.1
rcIpfixCollectorAddressType IP address type of the collector. An index to the CollectorEntry.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.66.1.2.2.1.2
rcIpfixCollectorAddress IP address of the collector. An index to the CollectorEntry.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.66.1.2.2.1.3
rcIpfixCollectorProtocol Protocol for export data from exporter to collector .	Enumerationr/w	.1.3.6.1.4.1.2272.1.66.1.2.2.1.4
rcIpfixCollectorDestPort Dest port to send the requests.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.66.1.2.2.1.5
rcIpfixCollectorExporterIpType Ip address type of the exporter for collector.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.66.1.2.2.1.6
rcIpfixCollectorExporterIp Ip address of the exporter for collector.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.66.1.2.2.1.7
rcIpfixCollectorProtoVer This specifies the protocol version for ipfix.	Enumerationr/w	.1.3.6.1.4.1.2272.1.66.1.2.2.1.8
rcIpfixCollectorState State of the particular collector. Enable is true by default.	SNMPv2-TCTruthValuer/w Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.66.1.2.2.1.9
rcIpfixCollectorRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Constraints: range: 16-16 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.66.1.2.2.1.10

rcIpfixConfPortTable

table

.1.3.6.1.4.1.2272.1.66.1.2.3 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpfixConfPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpfixConfPortTable'

Copy

A table to store the configuration details for IPFIX for each
port.  This table is indexed by port number.

rcIpfixConfPortEntry row .1.3.6.1.4.1.2272.1.66.1.2.3.1

Entry holding IPFIX config information per port.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpfixConfPortId An index to the IpfixConfPortEntry, a unique identifier of the portId	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.66.1.2.3.1.1
rcIpfixConfPortSampleRate Used to configure the sampling rate. Sample one in every N packets.	Integer32r/w	.1.3.6.1.4.1.2272.1.66.1.2.3.1.2
rcIpfixConfPortHashPolyCoeffs Command to set hash polynomial coeffs.	Integer32r/w	.1.3.6.1.4.1.2272.1.66.1.2.3.1.3
rcIpfixConfPortHashPolySeed Command to set hash polynomial seed.	Integer32r/w	.1.3.6.1.4.1.2272.1.66.1.2.3.1.4
rcIpfixConfPortFlush This is used to delete all records stored in COP, or to initiate an export of all records and delete data base after the export is finished.	Enumerationr/w	.1.3.6.1.4.1.2272.1.66.1.2.3.1.5
rcIpfixConfPortAllTraffic This is used to enable/disable ipfix on all trafiic, for the specified port.	EnableValuer/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 6 passive	.1.3.6.1.4.1.2272.1.66.1.2.3.1.6
rcIpfixConfPortHashKeyId hash key id.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2272.1.66.1.2.3.1.7
rcIpfixConfPortDynamicSampRate Indicates the dynamic sampling rate.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.66.1.2.3.1.8

rcIpfixHashStatsTable

table

.1.3.6.1.4.1.2272.1.66.1.2.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpfixHashStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpfixHashStatsTable'

Copy

A table of hash Statistics entries to store the statistics
for each slot. This table is indexed by the slot number.

rcIpfixHashStatsEntry row .1.3.6.1.4.1.2272.1.66.1.2.4.1

Entry containing hash statistics information for a particular
slot.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpfixHashStatsSlotNum A unique identifier for the table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.66.1.2.4.1.1
rcIpfixHashStatsHashOverflows Count of hash overflows per slot.	SNMPv2-SMICounter64 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.66.1.2.4.1.2
rcIpfixHashStatsHashDrops Count of hash drops per slot.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.66.1.2.4.1.3
rcIpfixHashStatsClear Setting this object will clear hash statistics for a slot.	Enumerationr/w Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.2272.1.66.1.2.4.1.4
rcIpfixHashStatsClearTime The value of sysUpTime when the hash statistics were last cleared.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.66.1.2.4.1.5

rcIpfixExporterStatsTable

table

.1.3.6.1.4.1.2272.1.66.1.2.5 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpfixExporterStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpfixExporterStatsTable'

Copy

A table of Exporter Statistics entries to store the statistics
for each slot, each collector.  This table is indexed by the
slot number and collector address.

rcIpfixExporterStatsEntry row .1.3.6.1.4.1.2272.1.66.1.2.5.1

Entry containing Exporter statistics information for a
particular slot and particular collector.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpfixExporterStatsSlotNum Index for the table, slot number.	Integer32	.1.3.6.1.4.1.2272.1.66.1.2.5.1.1
rcIpfixExporterStatsCollectorType Collector IP address type. This is an index for the table.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.2272.1.66.1.2.5.1.2
rcIpfixExporterStatsCollector Index for the table, collector address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.66.1.2.5.1.3
rcIpfixExporterStatsOutPkts Number of Packets sent.	SNMPv2-SMICounter64 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.66.1.2.5.1.4
rcIpfixExporterStatsOutOctets Number of Bytes sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.66.1.2.5.1.5
rcIpfixExporterStatsPktsLoss Number of Records lost.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.66.1.2.5.1.6
rcIpfixExporterStatsClear Setting this object will clear exporter statistics.	Enumerationr/w	.1.3.6.1.4.1.2272.1.66.1.2.5.1.7
rcIpfixExporterStatsClearTime The value of sysUpTime when exporter statistics were last cleared.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.66.1.2.5.1.8

rcOspfv3AreaTable

table

.1.3.6.1.4.1.2272.1.67.1.1.2 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3AreaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3AreaTable'

Copy

Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.

rcOspfv3AreaEntry row .1.3.6.1.4.1.2272.1.67.1.1.2.1

Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3AreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.2.1.1
rcOspfv3ImportAsExtern Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Type-7 LSAs which have Area-scope	Enumerationr/w	.1.3.6.1.4.1.2272.1.67.1.1.2.1.2
rcOspfv3AreaSpfRuns The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.3
rcOspfv3AreaBdrRtrCount The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.4
rcOspfv3AreaAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.5
rcOspfv3AreaScopeLsaCount The total number of Area-Scope link-state advertisements in this area's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.6
rcOspfv3AreaScopeLsaCksumSum The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determine if there has been a change in a router's link sta…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.2.1.7
rcOspfv3AreaSummary The variable rcOspfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate In…	Enumerationr/w Constraints: range: 1-1800	.1.3.6.1.4.1.2272.1.67.1.1.2.1.8
rcOspfv3AreaStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Constraints: range: 1-1800 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.2.1.9
rcOspfv3StubMetric The metric value advertised for the default route into Stub and NSSA areas.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.67.1.1.2.1.10
rcOspfv3AreaNssaTranslatorRole Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.67.1.1.2.1.11
rcOspfv3AreaNssaTranslatorState Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's rcOspfv3AreaNssTranslatorRole has been set to alway…	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.2272.1.67.1.1.2.1.12
rcOspfv3AreaNssaTranslatorStabilityInterval The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.13
rcOspfv3AreaNssaTranslatorEvents Indicates the number of Translator State changes that have occurred since the last boot-up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.2.1.14
rcOspfv3AreaStubMetricType This variable displays the type of metric ad- vertised as a default route.	Enumerationr/w	.1.3.6.1.4.1.2272.1.67.1.1.2.1.15

rcOspfv3AsLsdbTable

table

.1.3.6.1.4.1.2272.1.67.1.1.3 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3AsLsdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3AsLsdbTable'

Copy

The OSPFv3 Process's AS-Scope Link State Database.

rcOspfv3AsLsdbEntry row .1.3.6.1.4.1.2272.1.67.1.1.3.1

A single AS-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored in the database.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.3.1.1
rcOspfv3AsLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.3.1.2
rcOspfv3AsLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no address…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.3.1.3
rcOspfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIInteger32 Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.3.1.4
rcOspfv3AsLsdbAge This field is the age of the link state adver- tisement in seconds.	secondsSNMPv2-SMIInteger32 Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.67.1.1.3.1.5
rcOspfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.3.1.6
rcOspfv3AsLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.67.1.1.3.1.7
rcOspfv3AsLsdbTypeKnown Is the LSA type recognized by this Router?	SNMPv2-TCTruthValue Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full 9 restart Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.3.1.8

rcOspfv3AreaLsdbTable

table

.1.3.6.1.4.1.2272.1.67.1.1.4 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3AreaLsdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3AreaLsdbTable'

Copy

The OSPFv3 Process's Area-Scope Link State Database.

rcOspfv3AreaLsdbEntry row .1.3.6.1.4.1.2272.1.67.1.1.4.1

A single Area-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3AreaLsdbAreaId The 32 bit identifier of the Area from which the LSA was received.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.4.1.1
rcOspfv3AreaLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also stored in this database.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.4.1.2
rcOspfv3AreaLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	SNMPv2-SMIIpAddress Enumerated Values: 1 notHelping 2 helping Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.4.1.3
rcOspfv3AreaLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no address…	SNMPv2-SMIUnsigned32 Constraints: range: 1-1800	.1.3.6.1.4.1.2272.1.67.1.1.4.1.4
rcOspfv3AreaLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIInteger32 Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.4.1.5
rcOspfv3AreaLsdbAge This field is the age of the link state adver- tisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.4.1.6
rcOspfv3AreaLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.4.1.7
rcOspfv3AreaLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.4.1.2272.1.67.1.1.4.1.8
rcOspfv3AreaLsdbTypeKnown Is the LSA type recognized by this Router?	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.4.1.9

rcOspfv3LinkLsdbTable

table

.1.3.6.1.4.1.2272.1.67.1.1.5 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3LinkLsdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3LinkLsdbTable'

Copy

The OSPFv3 Process's Link-Scope Link State Database.

rcOspfv3LinkLsdbEntry row .1.3.6.1.4.1.2272.1.67.1.1.5.1

A single Link-Scope Link State Advertisement.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3LinkLsdbIfIndex The identifier of the link from which the LSA was received.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.5.1.1
rcOspfv3LinkLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also stored in this database.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.2272.1.67.1.1.5.1.2
rcOspfv3LinkLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.5.1.3
rcOspfv3LinkLsdbLsid The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no address…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.5.1.4
rcOspfv3LinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.5.1.5
rcOspfv3LinkLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.5.1.6
rcOspfv3LinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.5.1.7
rcOspfv3LinkLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.4.1.2272.1.67.1.1.5.1.8
rcOspfv3LinkLsdbTypeKnown Indicates whether the LSA type is recognized by this Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.5.1.9

rcOspfv3HostTable

table

.1.3.6.1.4.1.2272.1.67.1.1.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3HostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3HostTable'

Copy

The list of Hosts, and their metrics, that the
router will advertise as host routes.

rcOspfv3HostEntry row .1.3.6.1.4.1.2272.1.67.1.1.6.1

A metric to be advertised when a given host is
reachable.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3HostAddressType The address type of rcOspfv3HostAddress. Only IPv6 addresses without zone index are expected.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.6.1.1
rcOspfv3HostAddress The IPv6 Address of the Host. Must be a Global or Site-local address.	OctetString Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.2272.1.67.1.1.6.1.2
rcOspfv3HostMetric The Metric to be advertised.	Integer32r/w	.1.3.6.1.4.1.2272.1.67.1.1.6.1.3
rcOspfv3HostStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.6.1.4
rcOspfv3HostAreaID The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.6.1.5

rcOspfv3IfTable

table

.1.3.6.1.4.1.2272.1.67.1.1.7 · 1 row entry · 26 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3IfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3IfTable'

Copy

The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.

rcOspfv3IfEntry row .1.3.6.1.4.1.2272.1.67.1.1.7.1

The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	InterfaceIndex Constraints: range: 1-1800	.1.3.6.1.4.1.2272.1.67.1.1.7.1.1
rcOspfv3IfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone.	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.7.1.2
rcOspfv3IfType The OSPFv3 interface type.	Enumerationr/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.3
rcOspfv3IfAdminStat The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is exter…	Enumerationr/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.4
rcOspfv3IfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designate…	Integer32r/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.5
rcOspfv3IfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	secondsInteger32r/w Enumerated Values: 8195 interAreaPrefixLsa 8199 nssaExternalLsa	.1.3.6.1.4.1.2272.1.67.1.1.7.1.6
rcOspfv3IfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request …	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.7
rcOspfv3IfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	secondsInteger32r/w Constraints: range: 3-128	.1.3.6.1.4.1.2272.1.67.1.1.7.1.8
rcOspfv3IfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for a…	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.9
rcOspfv3IfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.	secondsUnsigned32r/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.2272.1.67.1.1.7.1.10
rcOspfv3IfState The OSPFv3 Interface State.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.7.1.11
rcOspfv3IfDesignatedRouter The Router ID of the Designated Router.	SNMPv2-SMIIpAddress Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.67.1.1.7.1.12
rcOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.7.1.14
rcOspfv3IfEvents The number of times this OSPF interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.7.1.15
rcOspfv3IfStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Constraints: range: 1-2147483647 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.7.1.17
rcOspfv3IfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB…	Enumerationr/w Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.67.1.1.7.1.18
rcOspfv3IfDemand Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.7.1.19
rcOspfv3IfMetricValue The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the rcOspfv3ReferenceBandwidth object. A value of '0' means …	Integer32r/w	.1.3.6.1.4.1.2272.1.67.1.1.7.1.20
rcOspfv3IfLinkScopeLsaCount The total number of Link-Scope link-state advertisements in this link's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.7.1.21
rcOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there has been a change in a router's link sta…	SNMPv2-SMIInteger32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.67.1.1.7.1.22
rcOspfv3IfInstId Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.7.1.23
rcOspfv3IfDemandNbrProbe Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.	SNMPv2-TCTruthValuer/w Enumerated Values: 0 none 1 trunk 2 sg 3 endpt 4 vlan 5 port 6 mimencapvlan 7 nodal Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.7.1.24
rcOspfv3IfDemandNbrProbeRetxLimit The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.7.1.25
rcOspfv3IfDemandNbrProbeInterval Defines how often the neighbor will be probed.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.7.1.26
rcOspfv3IfBfdEnable Used to enable/disable BFD for OSPFv3.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.67.1.1.7.1.27
rcOspfv3IfLinkLsaSuppression Used to enable/disable link lsa suppression for OSPFv3.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.67.1.1.7.1.28

rcOspfv3VirtIfTable

table

.1.3.6.1.4.1.2272.1.67.1.1.8 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3VirtIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3VirtIfTable'

Copy

Information about this router's virtual inter-
faces.

rcOspfv3VirtIfEntry row .1.3.6.1.4.1.2272.1.67.1.1.8.1

Information about a single Virtual Interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3VirtIfAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	SNMPv2-SMIIpAddress Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.67.1.1.8.1.1
rcOspfv3VirtIfNeighbor The Router ID of the Virtual Neighbor.	SNMPv2-SMIIpAddress Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.67.1.1.8.1.2
rcOspfv3VirtIfIndex The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs.	SNMPv2-SMIInteger32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.67.1.1.8.1.3
rcOspfv3VirtIfTransitDelay The estimated number of seconds it takes to transmit a link- state update packet over this interface.	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.67.1.1.8.1.4
rcOspfv3VirtIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state reque…	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.67.1.1.8.1.5
rcOspfv3VirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.	secondsInteger32r/w Constraints: range: 0-65535000	.1.3.6.1.4.1.2272.1.67.1.1.8.1.6
rcOspfv3VirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for t…	secondsInteger32r/w Constraints: range: 0-655350	.1.3.6.1.4.1.2272.1.67.1.1.8.1.7
rcOspfv3VirtIfState OSPF virtual interface states.	Enumeration Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.67.1.1.8.1.8
rcOspfv3VirtIfEvents The number of state changes or error events on this Virtual Link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.8.1.9
rcOspfv3VirtIfStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.8.1.10
rcOspfv3VirtIfLinkScopeLsaCount The total number of Link-Scope link-state advertisements in this virtual link's link-state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.8.1.11
rcOspfv3VirtIfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.8.1.12

rcOspfv3NbrTable

table

.1.3.6.1.4.1.2272.1.67.1.1.9 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3NbrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3NbrTable'

Copy

A table of non-virtual neighbor information.

rcOspfv3NbrEntry row .1.3.6.1.4.1.2272.1.67.1.1.9.1

The information regarding a single neighbor.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3NbrIfIndex The local link ID of the link over which the neighbor can be reached.	InterfaceIndex Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.67.1.1.9.1.1
rcOspfv3NbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.9.1.2
rcOspfv3NbrAddressType The address type of rcOspfv3NbrAddress. Only IPv6 addresses without zone index are expected.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.9.1.3
rcOspfv3NbrAddress The IPv6 address of the neighbor associated with the local link.	OctetString	.1.3.6.1.4.1.2272.1.67.1.1.9.1.4
rcOspfv3NbrOptions A Bit Mask corresponding to the neighbor's op- tions field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.9.1.5
rcOspfv3NbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	Integer32	.1.3.6.1.4.1.2272.1.67.1.1.9.1.6
rcOspfv3NbrState The State of the relationship with this Neigh- bor.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.9.1.7
rcOspfv3NbrEvents The number of times this neighbor relationship has changed state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.9.1.8
rcOspfv3NbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.67.1.1.9.1.9
rcOspfv3NbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Constraints: range: 1-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.9.1.10
rcOspfv3NbrIfId The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index.	SNMPv2-SMIInteger32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.67.1.1.9.1.11
rcOspfv3NbrRestartHelperStatus Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.67.1.1.9.1.12
rcOspfv3NbrRestartHelperAge Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsInteger32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.67.1.1.9.1.13
rcOspfv3NbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.9.1.14
rcOspfv3NbrDeadIntCnt This is a Dead interval Count or TTL (time to live) field that indicates how many seconds are left before the Neighbor is declared down. The starting value is set to the Router Dead Interval value and it decrements …	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.9.1.15

rcOspfv3NbmaNbrTable

table

.1.3.6.1.4.1.2272.1.67.1.1.10 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3NbmaNbrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3NbmaNbrTable'

Copy

A table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery.

rcOspfv3NbmaNbrEntry row .1.3.6.1.4.1.2272.1.67.1.1.10.1

The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3NbmaNbrIfIndex The local link ID of the link over which the neighbor can be reached.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.10.1.1
rcOspfv3NbmaNbrAddress The IPv6 address of the neighbor associated with the local link.	IPV6-TCIpv6Address Enumerated Values: 1 trunk 2 sg 4 endpt 8 unused 16 vlan 32 port 64 endptClient 32769 remotetrunk 32770 remotesg 32772 remoteendpt 32784 remoteVlan 32800 remotePort 32832 remoteEndptClient 3145728 nodal Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.67.1.1.10.1.2
rcOspfv3NbmaNbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	Integer32r/w	.1.3.6.1.4.1.2272.1.67.1.1.10.1.3
rcOspfv3NbmaNbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until a Hello is received from the configured neighbor.	SNMPv2-SMIIpAddress Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.67.1.1.10.1.4
rcOspfv3NbmaNbrState The State of the relationship with this Neigh- bor.	Enumeration Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.67.1.1.10.1.5
rcOspfv3NbmaNbrStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually configured entries will have a storage type of nonVolatile …	SNMPv2-TCStorageTyper/w Enumerated Values: 1 active 2 inactive Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.67.1.1.10.1.6
rcOspfv3NbmaNbrStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.10.1.7

rcOspfv3VirtNbrTable

table

.1.3.6.1.4.1.2272.1.67.1.1.11 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3VirtNbrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3VirtNbrTable'

Copy

A table of virtual neighbor information.

rcOspfv3VirtNbrEntry row .1.3.6.1.4.1.2272.1.67.1.1.11.1

Virtual neighbor information.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3VirtNbrArea The Transit Area Identifier.	SNMPv2-SMIIpAddress Enumerated Values: 1 up 2 down 3 unknown Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.11.1.1
rcOspfv3VirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.11.1.2
rcOspfv3VirtNbrIfIndex The local interface ID for the virtual link over which the neighbor can be reached.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.11.1.3
rcOspfv3VirtNbrAddressType The address type of rcOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.11.1.4
rcOspfv3VirtNbrAddress The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address.	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.67.1.1.11.1.5
rcOspfv3VirtNbrOptions A Bit Mask corresponding to the neighbor's op- tions field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.11.1.6
rcOspfv3VirtNbrState The state of the Virtual Neighbor Relation- ship.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.11.1.7
rcOspfv3VirtNbrEvents The number of times this virtual link has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.11.1.8
rcOspfv3VirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.67.1.1.11.1.9
rcOspfv3VirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Constraints: range: 32-32 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.67.1.1.11.1.10
rcOspfv3VirtNbrIfId The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID.	SNMPv2-SMIInteger32 Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.67.1.1.11.1.11
rcOspfv3VirtNbrRestartHelperStatus Indicates whether the router is acting as a hitless restart helper for the neighbor.	Enumeration Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.67.1.1.11.1.12
rcOspfv3VirtNbrRestartHelperAge Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor.	secondsInteger32	.1.3.6.1.4.1.2272.1.67.1.1.11.1.13
rcOspfv3VirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor.	Enumeration Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.67.1.1.11.1.14

rcOspfv3AreaAggregateTable

table

.1.3.6.1.4.1.2272.1.67.1.1.12 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcOspfv3AreaAggregateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcOspfv3AreaAggregateTable'

Copy

A range of IPv6 prefixes specified by a
prefix/prefix length  pair. Note that if
ranges are configured such that one range sub-
sumes  another range the most specific match is
the preferred one.

rcOspfv3AreaAggregateEntry row .1.3.6.1.4.1.2272.1.67.1.1.12.1

A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one.

Indexes

No indexes recorded

Column	Syntax	OID
rcOspfv3AreaAggregateAreaID The Area the Address Aggregate is to be found within.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.67.1.1.12.1.1
rcOspfv3AreaAggregateAreaLsdbType The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to.	Enumeration	.1.3.6.1.4.1.2272.1.67.1.1.12.1.2
rcOspfv3AreaAggregatePrefix The IPv6 Prefix.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.67.1.1.12.1.3
rcOspfv3AreaAggregatePrefixLength The length of the prefix (in bits). A prefix can not be shorter than 3 bits.	bitsUnsigned32	.1.3.6.1.4.1.2272.1.67.1.1.12.1.4
rcOspfv3AreaAggregateStatus This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.67.1.1.12.1.5
rcOspfv3AreaAggregateEffect Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at all outside the area.	Enumerationr/w	.1.3.6.1.4.1.2272.1.67.1.1.12.1.6
rcOspfv3AreaAggregateRouteTag This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.67.1.1.12.1.7
rcOspfv3AreaAggregateAdvertiseMetric Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric.	Integer32r/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.67.1.1.12.1.8

rcCfmMaintenanceDomainTable

table

.1.3.6.1.4.1.2272.1.69.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmMaintenanceDomainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmMaintenanceDomainTable'

Copy

Connectivity Fault Management Maintenance Domain table

rcCfmMaintenanceDomainEntry row .1.3.6.1.4.1.2272.1.69.1.1

Connectivity Fault Management Maintenance Domain entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmMaintenanceDomainIndex Maintenance Domain index	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.1.1.1
rcCfmMaintenanceDomainName Maintenance Domain Name	OctetStringr/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.1.1.2
rcCfmMaintenanceDomainRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.1.1.3
rcCfmMaintenanceDomainNumOfMa Used to indicate the number of MAs belong to this maintenance domain	SNMPv2-SMIInteger32 Enumerated Values: 1 up 2 down 3 waiting Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.1.1.4
rcCfmMaintenanceDomainClearStats To clear the MEPS CCM sending/receiving message counter un der this domain	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.1.1.5
rcCfmMaintenanceDomainLevel To set the maintenance level in this domain	Integer32r/w	.1.3.6.1.4.1.2272.1.69.1.1.6
rcCfmMaintenanceDomainNumOfMip Used to indicate the number of Mips belong to this maintenance domain	SNMPv2-SMIInteger32 Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.1.1.7
rcCfmMaintenanceDomainType To indicate the type of domain	Enumeration Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.1.1.8
rcCfmMaintenanceDomainEventTrapEnable Event Trap enable	EnableValuer/w Constraints: range: 1-80 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.1.1.9
rcCfmMaintenanceDomainPmEnable Performance monitor enable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.1.1.10
rcCfmMaintenanceDomainClearAisStats To clear the AIS CCM sending/receiving message counter un der this domain	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.1.1.11

rcCfmMaintenanceAssociationTable

table

.1.3.6.1.4.1.2272.1.69.2 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmMaintenanceAssociationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmMaintenanceAssociationTable'

Copy

Connectivity Fault Management Maintenance Association table

rcCfmMaintenanceAssociationEntry row .1.3.6.1.4.1.2272.1.69.2.1

Connectivity Fault Management Maintenance Association entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmMaintenanceAssociationDomainIndex Maintenance Association Domain Index	Integer32	.1.3.6.1.4.1.2272.1.69.2.1.1
rcCfmMaintenanceAssociationAssociationIndex Maintenance Association Index	Integer32	.1.3.6.1.4.1.2272.1.69.2.1.2
rcCfmMaintenanceAssociationDomainName Maintenance Association Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.2.1.3
rcCfmMaintenanceAssociationAssociationName Maintenance Association Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.2.1.4
rcCfmMaintenanceAssociationAdminState Administratively enable or disable a maintenance association.	EnableValuer/w Constraints: range: 255-255 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.5
rcCfmMaintenanceAssociationRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 255-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.2.1.6
rcCfmMaintenanceAssociationCcmInterval Interval of periodic Continuity Check Message to be transmitted	millisecondsInteger32r/w Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.2.1.7
rcCfmMaintenanceAssociationCcmLifetime Lifetime of periodic Continuity Check Message	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.2.1.8
rcCfmMaintenanceAssociationCcmPriority Priority of Continuity Check Message to be transmitted	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.2272.1.69.2.1.9
rcCfmMaintenanceAssociationCcmTxEnable Continuity Check Message transmit enable	EnableValuer/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.69.2.1.10
rcCfmMaintenanceAssociationCcmRxEnable Continuity Check Message receive enable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.11
rcCfmMaintenanceAssociationNumOfMep Used to indicate the number of MEPs belong to this maintenance association	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.2.1.12
rcCfmMaintenanceAssociationClearStats To clear the MEPs CCM sending/receiving message counter under this MA	SNMPv2-TCTruthValuer/w Constraints: range: 1-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.2.1.13
rcCfmMaintenanceAssociationAutoDetect Indicates whether MA allows auto-detect of remote MEPs	EnableValuer/w Constraints: range: 1-2147483647 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.14
rcCfmMaintenanceAssociationNumOfRemoteMep Used to indicate the number of remote MEPs belong to this maintenance association	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.2.1.15
rcCfmMaintenanceAssociationRemoveAutoRmep Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified	Integer32r/w	.1.3.6.1.4.1.2272.1.69.2.1.16
rcCfmMaintenanceAssociationCcmRdiEnable Continuity Check Message RDI enable	EnableValuer/w Constraints: range: 1-8191 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.17
rcCfmMaintenanceAssociationCcmMulticast Indicates whether MA sends Multicast or Unicast CCMs	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.18
rcCfmMaintenanceAssociationEventTrapEnable Event Trap enable This MA level setting overrides MD level setting.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.19
rcCfmMaintenanceAssociationPmEnable Performance monitor enable This MA level setting overrides MD level setting.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.20
rcCfmMaintenanceAssociationClearAisStats To clear the Ais CCM sending/receiving message counter under this MA	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.2.1.21

rcCfmMaintenanceEndPointTable

table

.1.3.6.1.4.1.2272.1.69.3 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmMaintenanceEndPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmMaintenanceEndPointTable'

Copy

Connectivity Fault Management Maintenance Association table

rcCfmMaintenanceEndPointEntry row .1.3.6.1.4.1.2272.1.69.3.1

Connectivity Fault Management Maintenance EndPoint entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmMaintenanceEndPointDomainIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.3.1.1
rcCfmMaintenanceEndPointAssociationIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.3.1.2
rcCfmMaintenanceEndPointId Maintenance EndPoint ID	Integer32 Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.2272.1.69.3.1.3
rcCfmMaintenanceEndPointDomainName Maintenance Domain Name	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.3.1.4
rcCfmMaintenanceEndPointAssociationName Maintenance Association Name	OctetString Enumerated Values: 1 none 2 up 3 down 4 lowerLayerDown 5 testing 6 unknown 7 dormant 8 notpresent	.1.3.6.1.4.1.2272.1.69.3.1.5
rcCfmMaintenanceEndPointAdminState Administratively enable or disable a maintenance EndPoint.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.6
rcCfmMaintenanceEndPointRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.3.1.7
rcCfmMaintenanceEndPointCcmPriority Priority of Continuity Check Message to be transmitted	Integer32r/w	.1.3.6.1.4.1.2272.1.69.3.1.8
rcCfmMaintenanceEndPointCcmTxEnable Continuity Check Message transmit enable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.9
rcCfmMaintenanceEndPointCcmRxEnable Continuity Check Message receive enable	EnableValuer/w Constraints: range: 1-2147483647 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.10
rcCfmMaintenanceEndPointMepType Mep Type	Enumeration Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.3.1.11
rcCfmMaintenanceEndPointClearStats To clear the MEP CCM sending/receiving message counter	SNMPv2-TCTruthValuer/w Constraints: range: 1-8191 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.3.1.12
rcCfmMaintenanceEndPointServiceDescription Used to specify what service this mep assigned to	OctetString	.1.3.6.1.4.1.2272.1.69.3.1.13
rcCfmMaintenanceEndPointRemoveAutoRmep Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified	Integer32r/w	.1.3.6.1.4.1.2272.1.69.3.1.14
rcCfmMaintenanceEndPointMepStatus Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active status.	Enumeration	.1.3.6.1.4.1.2272.1.69.3.1.15
rcCfmMaintenanceEndPointAisTxEnable Alarm Indication Signal Message transmit enable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.16
rcCfmMaintenanceEndPointAisInterval Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds.	millisecondsEnumerationr/w	.1.3.6.1.4.1.2272.1.69.3.1.17
rcCfmMaintenanceEndPointIfTlv Admin control of the Interface-Status-Tlv in maintenanceEndpoint.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.18
rcCfmMaintenanceEndPointMepDirection Indicates the direction in which the Maintenance association faces on the bridge port.	Enumeration Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.3.1.19
rcCfmMaintenanceEndPointClearAisStats To clear the AIS sending/receiving message counter	SNMPv2-TCTruthValuer/w Constraints: range: 1-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.3.1.20
rcCfmMaintenanceEndPointIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.	InterfaceIndexOrZeror/w Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.3.1.21
rcCfmMaintenanceEndPointCcmVlanId Customer CCM VLAN ID	RcVlanIdOrNoner/w Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.3.1.22
rcCfmMaintenanceEndPointLabel User provided field. Used to give extra management information/data.	OctetStringr/w Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.3.1.23

rcCfmTrunkGroupTable

table

.1.3.6.1.4.1.2272.1.69.4 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTrunkGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTrunkGroupTable'

Copy

Connectivity Fault TrunkGroup table

rcCfmTrunkGroupEntry row .1.3.6.1.4.1.2272.1.69.4.1

Connectivity Fault Management TrunkGroup entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTrunkGroupName Trunk Group Name	CfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.4.1.1
rcCfmTrunkGroupRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.4.1.2
rcCfmTrunkGroupPrimaryTrunk Trunk Group PBT Primary Trunk Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.4.1.3
rcCfmTrunkGroupSecondaryTrunk Trunk Group PBT Secondary Trunk Name	OctetStringr/w Enumerated Values: 1 start 2 up 3 down	.1.3.6.1.4.1.2272.1.69.4.1.4
rcCfmTrunkGroupActiveTrunk Trunk Group PBT Active Trunk Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.4.1.5
rcCfmTrunkGroupRevertive Revertive enable or disable	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.4.1.6
rcCfmTrunkGroupLoopBackVlanId Loopback VLAN ID for local pbt switching	Integer32r/w Enumerated Values: 1 none 2 up 3 down 4 lowerLayerDown 5 testing 6 unknown 7 dormant 8 notpresent	.1.3.6.1.4.1.2272.1.69.4.1.7
rcCfmTrunkGroupUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.4.1.8
rcCfmTrunkGroupUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.4.1.9

rcCfmTrunkTable

table

.1.3.6.1.4.1.2272.1.69.5 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTrunkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTrunkTable'

Copy

Connectivity Fault Trunk table

rcCfmTrunkEntry row .1.3.6.1.4.1.2272.1.69.5.1

Connectivity Fault Management Trunk entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTrunkName PBT Trunk Name	CfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.5.1.1
rcCfmTrunkPort PBT Trunk Port	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.5.1.2
rcCfmTrunkAdminState Administratively enable or disable a PBT trunk.	EnableValuer/w Enumerated Values: 1 vlan 2 unused 4 endptClient	.1.3.6.1.4.1.2272.1.69.5.1.3
rcCfmTrunkRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.5.1.4
rcCfmTrunkMac Trunk Mac (remote CP mac)	SNMPv2-TCMacAddressr/w Constraints: range: 0-48 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.5.1.5
rcCfmTrunkMdName PBT Trunk Maintenance Domain Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.5.1.6
rcCfmTrunkMaName PBT Trunk Maintenance Association Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.5.1.7
rcCfmTrunkVlanId PBT trunk VLAN ID	Integer32r/w	.1.3.6.1.4.1.2272.1.69.5.1.8
rcCfmTrunkReverseVlanId PBT trunk reverse VLAN ID	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.69.5.1.9
rcCfmTrunkMepId PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Trunk. '0' means unassign the Med ID from the CFM Trunk	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.69.5.1.10
rcCfmTrunkHoldTimer Trunk hold timer value.	SNMPv2-SMIInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.5.1.11
rcCfmTrunkOperStatus The current operational status of this trunk.	Enumeration Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.5.1.12
rcCfmTrunkSourceMac Trunk Source Mac (local switch PBT mac)	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.5.1.13
rcCfmTrunkClearStats Action to clear the stats for all trunks	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.5.1.14
rcCfmTrunkUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.5.1.15
rcCfmTrunkUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.5.1.16
rcCfmTrunkSubportQueueSet Subport Queue Set Index Number	Integer32r/w	.1.3.6.1.4.1.2272.1.69.5.1.17
rcCfmTrunkDualHomePartner Enable PBT trunk as Dual Home Partner	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.5.1.18

rcCfmServiceGroupTable

table

.1.3.6.1.4.1.2272.1.69.6 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmServiceGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmServiceGroupTable'

Copy

Connectivity Fault Service Group table

rcCfmServiceGroupEntry row .1.3.6.1.4.1.2272.1.69.6.1

Connectivity Fault Management ServiceGroup entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmServiceGroupName PBT ServiceGroup Name	CfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.6.1.1
rcCfmServiceGroupPort PBT ServiceGroup Port	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.6.1.2
rcCfmServiceGroupAdminState Administratively enable or disable a PBT Service Group.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.6.1.3
rcCfmServiceGroupRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 1-2147483647 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.6.1.4
rcCfmServiceGroupMac ServiceGroup Mac (remote mac of NPU)	SNMPv2-TCMacAddressr/w Constraints: range: 22-22 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.6.1.5
rcCfmServiceGroupMdName PBT ServiceGroup Maintenance Domain Name	OctetStringr/w Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.6.1.6
rcCfmServiceGroupMaName PBT ServiceGroup Maintenance Association Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.6.1.7
rcCfmServiceGroupTgName PBT ServiceGroup Trunk Group Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.6.1.8
rcCfmServiceGroupMepId PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Service group. '0' means unassign the Med ID from the CFM service group	Integer32r/w	.1.3.6.1.4.1.2272.1.69.6.1.9
rcCfmServiceGroupRingId Ring ID associated with Service Group	Integer32r/w	.1.3.6.1.4.1.2272.1.69.6.1.10
rcCfmServiceGroupCcmOperStatus The current CCM operational status of this service group.	Enumeration	.1.3.6.1.4.1.2272.1.69.6.1.11

rcCfmStatsTable

table

.1.3.6.1.4.1.2272.1.69.8 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmStatsTable'

Copy

CFM stats table

rcCfmStatsEntry row .1.3.6.1.4.1.2272.1.69.8.1

CFM Stats table entry. Contain CFM Message
sending/receiving and missing counter

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmStatsDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.8.1.1
rcCfmStatsAssociationIndex Maintenance Association Name	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.8.1.2
rcCfmStatsDomainName Maintenance Domain Name	SNMPv2-TCDisplayString Constraints: range: 1-22 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.8.1.3
rcCfmStatsAssociationName Maintenance Association Name	SNMPv2-TCDisplayString Constraints: range: 1-22 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.8.1.4
rcCfmStatsMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.8.1.5
rcCfmStatsTxCnt The total Number of CFM messages are transmitted by trunk or ESM port	SNMPv2-SMICounter64 Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.8.1.6
rcCfmStatsRxCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.7
rcCfmStatsRxZeroCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.69.8.1.8
rcCfmStatsMissedCnt The total Number of CFM messages are missing on trunk or ESM port	SNMPv2-SMICounter64 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.8.1.9
rcCfmStatsUpTimeCnt The total Time of CFM messages are UP on trunk or ESM port in milliseconds	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.10
rcCfmStatsDefect An enumerated value indicating the highest-priority defect that has been present since the MEP Fault Notification Generate State Machine was last in the FNG_RESET state, either: 1) DefRDICCM: The last CCM received by th…	Integer32	.1.3.6.1.4.1.2272.1.69.8.1.11
rcCfmStatsAisTxCnt The total Number of AIS messages transmitted by Client Mep on Port/MLT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.12
rcCfmStatsAisRxCnt The total Number of AIS messages received by Client Mep on Port/MLT	SNMPv2-SMICounter64 Enumerated Values: 1 ready 2 transmit 3 abort Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.13
rcCfmStatsAisOperState To indicate the operational status of AIS. It is set to true when AIS is transmitted. It is set to false when AIS is cleared.	Enumeration Constraints: range: 1-799	.1.3.6.1.4.1.2272.1.69.8.1.14
rcCfmStatsAisMipLevel This is Maintenance Domain Level of the MIP on which the AIS is transmitted.	Integer32 Enumerated Values: 1 throughput 2 roundTripTime	.1.3.6.1.4.1.2272.1.69.8.1.15
rcCfmStatsIfTlvTx To indicate the operational state of Interface Status TLV transmitted on MaintenanceEndpoint. This status indicates that the state of the local UNI Port.	Enumeration Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.69.8.1.16
rcCfmStatsAccessDrops The total number of packets dropped on ingress to access port, for this MEP, due to same or lower MD level	SNMPv2-SMICounter64 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.69.8.1.17
rcCfmStatsAggregateUplinkDrops The total number of packets dropped on ingress to uplink port, for all MEPS, due to lower MD level	SNMPv2-SMICounter64 Enumerated Values: 1 allZero 2 allZeroCrc 3 pseudoRandomBitSequence 4 pseudoRandomBitSequenceCrc Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.18

rcCfmRemoteMepConfigTable

table

.1.3.6.1.4.1.2272.1.69.11 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmRemoteMepConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmRemoteMepConfigTable'

Copy

Connectivity Fault Management Remote Maintenance Association table

rcCfmRemoteMepConfigEntry row .1.3.6.1.4.1.2272.1.69.11.1

Connectivity Fault Management Remote Maintenance EndPoint entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmRemoteMepConfigDomainIndex Remote Maintenance Domain Name	Integer32 Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac	.1.3.6.1.4.1.2272.1.69.11.1.1
rcCfmRemoteMepConfigAssociationIndex Remote Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.11.1.2
rcCfmRemoteMepConfigId Remote Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.11.1.3
rcCfmRemoteMepConfigDomainName Remote Maintenance Domain Name	SNMPv2-TCDisplayString Constraints: range: 1-2147483647 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.11.1.4
rcCfmRemoteMepConfigAssociationName Remote Maintenance Association Name	SNMPv2-TCDisplayString Constraints: range: 1-2147483647 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.11.1.5
rcCfmRemoteMepConfigMacAddr Mac address of remote maintenance endpoint	SNMPv2-TCMacAddressr/w Constraints: range: 1-8191 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.11.1.6
rcCfmRemoteMepConfigRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 1-22 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.11.1.7

rcCfmRemoteMepStatsTable

table

.1.3.6.1.4.1.2272.1.69.12 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmRemoteMepStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmRemoteMepStatsTable'

Copy

CFM Mep Learn stats table contains the 
local and remote mep Tx and Rx statistics

rcCfmRemoteMepStatsEntry row .1.3.6.1.4.1.2272.1.69.12.1

CFM Stats table entry. Contain CFM Message
sending/receiving and missing counter.
Entry indicate the CCM message still alive

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmRemoteMepStatsDomainIndex Maintenance Domain Name index	Integer32	.1.3.6.1.4.1.2272.1.69.12.1.1
rcCfmRemoteMepStatsAssociationIndex Maintenance Association Name index	Integer32 Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.12.1.2
rcCfmRemoteMepStatsMepId Local MEP (Maintenance EndPoint) ID	Integer32	.1.3.6.1.4.1.2272.1.69.12.1.3
rcCfmRemoteMepStatsRemoteMepId Remote Mep Id which the local mep rx CCM message from	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.12.1.4
rcCfmRemoteMepStatsDomainName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.12.1.5
rcCfmRemoteMepStatsAssociationName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.12.1.6
rcCfmRemoteMepStatsLearnType Indicate the learning remote Mep is static created or dynamic learn	Enumeration Enumerated Values: 1 ready 2 transmit 3 abort	.1.3.6.1.4.1.2272.1.69.12.1.7
rcCfmRemoteMepStatsRemoteMacAddr A remote MAC address	SNMPv2-TCMacAddress Constraints: range: 1-1023 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.12.1.8
rcCfmRemoteMepStatsRxCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Enumerated Values: 1 none 2 internalError 3 noRemoteMep 4 invalidRemoteMepMac 5 noRemoteMepMacLearned 6 mepDisabled 7 noLtrResponse 8 ltmToOwnMepMac 9 epDisabled 10 trunkDisabled 11 ltmComplete 12 ltmLeafNode Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.12.1.9
rcCfmRemoteMepStatsSeqErrCnt The total Number of Sequence errors	SNMPv2-SMICounter64 Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.12.1.10
rcCfmRemoteMepStatsOperState To indicate the operational state of remote maintenance endpoint	Enumeration	.1.3.6.1.4.1.2272.1.69.12.1.11
rcCfmRemoteMepStatsClearStats To clear the CCM messages counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.12.1.12
rcCfmRemoteMepStatsDbRdi State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.12.1.13
rcCfmRemoteMepStatsIfTlvRx To indicate the operational state of Interface Status TLV received on MaintenanceEndpoint. This status indicates that the state of the remote UNI Port	Enumeration	.1.3.6.1.4.1.2272.1.69.12.1.14

rcCfmMaintenanceIntermediatePointTable

table

.1.3.6.1.4.1.2272.1.69.13 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmMaintenanceIntermediatePointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmMaintenanceIntermediatePointTable'

Copy

Connectivity Fault Management Maintenance Intermediate Point table

rcCfmMaintenanceIntermediatePointEntry row .1.3.6.1.4.1.2272.1.69.13.1

Connectivity Fault Management Maintenance Intermediate Point entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmMaintenanceIntermediatePointDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.13.1.1
rcCfmMaintenanceIntermediatePointId Maintenance IntermediatePoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.13.1.2
rcCfmMaintenanceIntermediatePointDomainName Maintenance Domain Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.13.1.3
rcCfmMaintenanceIntermediatePointRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.13.1.4
rcCfmMaintenanceIntermediatePointMipType Mip Type	Enumeration	.1.3.6.1.4.1.2272.1.69.13.1.5
rcCfmMaintenanceIntermediatePointClearStats To clear the MIP CCM sending/receiving message counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.13.1.6
rcCfmMaintenanceIntermediatePointServiceDescription Used to specify what service this mip assigned to	OctetString	.1.3.6.1.4.1.2272.1.69.13.1.7

rcCfmNniTable

table

.1.3.6.1.4.1.2272.1.69.14 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmNniTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmNniTable'

Copy

CFM NNI table

rcCfmNniEntry row .1.3.6.1.4.1.2272.1.69.14.1

CFM NNI table entry

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmNniPort PBT Trunk Port	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.14.1.1
rcCfmNniServiceId TDI or MIM	Integer32	.1.3.6.1.4.1.2272.1.69.14.1.2
rcCfmNniPwIndex PW index	Integer32	.1.3.6.1.4.1.2272.1.69.14.1.3
rcCfmNniTlsIndex Access Port	Integer32	.1.3.6.1.4.1.2272.1.69.14.1.4
rcCfmNniTgName PBT Trunk Group Name	OctetString	.1.3.6.1.4.1.2272.1.69.14.1.5

rcCfmNniStatsTable

table

.1.3.6.1.4.1.2272.1.69.15 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmNniStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmNniStatsTable'

Copy

CFM NNI stats table

rcCfmNniStatsEntry row .1.3.6.1.4.1.2272.1.69.15.1

CFM NNI Stats table entry. Contain bytes processed and dropped
due to lookup failure in the SDT table

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmNniStatsPort PBT Trunk Port	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.15.1.1
rcCfmNniStatsOel2RxOctets The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.2
rcCfmNniStatsOel2RxDroppedOctets The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.3
rcCfmNniStatsMimRxOctets The total Number of bytes (MIM encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.4
rcCfmNniStatsMimRxDroppedOctets The total Number of bytes (MIM encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.5
rcCfmNniStatsPweRxOctets The total Number of bytes (PWE encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.6
rcCfmNniStatsPweRxDroppedOctets The total Number of bytes (PWE encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.7

rcCfmMipStatsTable

table

.1.3.6.1.4.1.2272.1.69.16 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmMipStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmMipStatsTable'

Copy

CFM Mip stats table

rcCfmMipStatsEntry row .1.3.6.1.4.1.2272.1.69.16.1

CFM Mip Stats table entry. Contain CFM Mip message number of
receiving/replying loopback & linktrace.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmMipStatsDomainIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.16.1.1
rcCfmMipStatsDomainName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.16.1.2
rcCfmMipStatsMipId Maintenance Intermediate Point ID	Integer32	.1.3.6.1.4.1.2272.1.69.16.1.3
rcCfmMipStatsLoopbackReceived The total Number of CFM loopback messages received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.4
rcCfmMipStatsLoopbackReplied The total Number of CFM loopback messages replied.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.5
rcCfmMipStatsLinktraceReceived The total Number of CFM linktrace messages received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.6
rcCfmMipStatsLinktraceReplied The total Number of CFM linktrace messages replied.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.7

rcCfmTransmitLbmTable

table

.1.3.6.1.4.1.2272.1.69.17 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitLbmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitLbmTable'

Copy

Connectivity Fault Management transmit LBM table

rcCfmTransmitLbmEntry row .1.3.6.1.4.1.2272.1.69.17.1

Connectivity Fault Management Maintenance EndPoint LBM entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitLbmDomainIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.17.1.1
rcCfmTransmitLbmAssociationIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.17.1.2
rcCfmTransmitLbmIndex Maintenance EndPoint Index	Integer32	.1.3.6.1.4.1.2272.1.69.17.1.3
rcCfmTransmitLbmDomainName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.17.1.4
rcCfmTransmitLbmAssociationName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.17.1.5
rcCfmTransmitLbmDestMacAddress An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.17.1.6
rcCfmTransmitLbmDestMepId An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association	Integer32r/w	.1.3.6.1.4.1.2272.1.69.17.1.7
rcCfmTransmitLbmDestIsMepId True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.8
rcCfmTransmitLbmMessages The number of loopback messages to be transmitted.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.17.1.9
rcCfmTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.17.1.11
rcCfmTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.12
rcCfmTransmitLbmSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.69.17.1.13
rcCfmTransmitLbmResultOk Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Constraints: range: 1-22 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.14
rcCfmTransmitLbmStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort The service is aborted or about …	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.17.1.15
rcCfmTransmitLbmResult Display the LBM result.	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.17.1.16
rcCfmTransmitLbmMode Modes of the transmit loopback service: throughput: The throughput mode of operation. LBM Frame will be sent out at the configured transmit interval rate for the burst-count number. roun…	Enumerationr/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.17.1.17
rcCfmTransmitLbmTimeoutInt The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.17.1.18
rcCfmTransmitLbmInterFrameInt The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as possible.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.17.1.19
rcCfmTransmitLbmTestPattern The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -----…	Enumerationr/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.17.1.20
rcCfmTransmitLbmDataSize An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.17.1.21
rcCfmTransmitLbmFrameSize If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.17.1.22
rcCfmTransmitLbmSourceMode Source modes of the transmit loopback service.	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.17.1.23

rcCfmTransmitLtmTable

table

.1.3.6.1.4.1.2272.1.69.18 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitLtmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitLtmTable'

Copy

Connectivity Fault Management transmit LTM table

rcCfmTransmitLtmEntry row .1.3.6.1.4.1.2272.1.69.18.1

Connectivity Fault Management Maintenance EndPoint LTM entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitLtmDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.18.1.1
rcCfmTransmitLtmAssociationIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.18.1.2
rcCfmTransmitLtmIndex Maintenance EndPoint Index	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.18.1.3
rcCfmTransmitLtmDomainName Maintenance Domain Name	OctetString Constraints: range: 1-10000000	.1.3.6.1.4.1.2272.1.69.18.1.4
rcCfmTransmitLtmAssociationName Maintenance Association Name	OctetString Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.5
rcCfmTransmitLtmVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.6
rcCfmTransmitLtmDestMacAddress An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.	SNMPv2-TCMacAddressr/w Constraints: range: 0-99 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.18.1.7
rcCfmTransmitLtmDestMepId An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.8
rcCfmTransmitLtmDestIsMepId True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.	SNMPv2-TCTruthValuer/w Constraints: range: 1-10000000 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.18.1.9
rcCfmTransmitLtmTtl The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, the LTM is not transmitted to the next hop. The value of …	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.10
rcCfmTransmitLtmSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.11
rcCfmTransmitLtmResultOk Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Constraints: range: 0-99 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.18.1.12
rcCfmTransmitLtmStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort. The service…	Enumerationr/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.18.1.13
rcCfmTransmitLtmResultobsolete Display the LTM result.	OctetString	.1.3.6.1.4.1.2272.1.69.18.1.14
rcCfmTransmitLtmFlag LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote Maintenance End Point 4 - Invalid Remote Maintenance En…	Enumeration	.1.3.6.1.4.1.2272.1.69.18.1.15
rcCfmTransmitLtmSourceMode Source modes of the transmit linktrace service.	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.18.1.16

rcCfmPbtTrunkStatsTable

table

.1.3.6.1.4.1.2272.1.69.19 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmPbtTrunkStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmPbtTrunkStatsTable'

Copy

Table of PBT trunk statistics.

rcCfmPbtTrunkStatsEntry row .1.3.6.1.4.1.2272.1.69.19.1

A PBT Trunk Statistics table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmPbtTrunkStatsName PBT Trunk Name.	CfmNameString Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.19.1.1
rcCfmPbtTrunkStatsPort PBT Trunk Port	InterfaceIndex Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.19.1.2
rcCfmPbtTrunkStatsDA Trunk Mac (remote CP mac)	SNMPv2-TCMacAddress Constraints: range: 1-8191 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.19.1.3
rcCfmPbtTrunkStatsVlanId PBT trunk VLAN ID	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.19.1.4
rcCfmPbtTrunkStatsRevVlanId PBT trunk reverse VLAN ID	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.19.1.5
rcCfmPbtTrunkStatsSA Trunk Source Mac (local switch PBT mac)	SNMPv2-TCMacAddress Constraints: range: 1-22 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.19.1.6
rcCfmPbtTrunkStatsRxOctets Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.19.1.7
rcCfmPbtTrunkStatsRxFrames Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.8
rcCfmPbtTrunkStatsTxOctets Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.9
rcCfmPbtTrunkStatsTxFrames Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.10
rcCfmPbtTrunkStatsRxPbit0Octets Number of Pbit 0 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.11
rcCfmPbtTrunkStatsRxPbit0Frames Number of P-Bit 0 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.12
rcCfmPbtTrunkStatsRxPbit1Octets Number of Pbit 1 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.13
rcCfmPbtTrunkStatsRxPbit1Frames Number of P-Bit 1 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.14
rcCfmPbtTrunkStatsRxPbit2Octets Number of Pbit 2 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.19.1.15
rcCfmPbtTrunkStatsRxPbit2Frames Number of P-Bit 2 Packets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.19.1.16
rcCfmPbtTrunkStatsRxPbit3Octets Number of Pbit 3 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.19.1.17
rcCfmPbtTrunkStatsRxPbit3Frames Number of P-Bit 3 Packets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.19.1.18
rcCfmPbtTrunkStatsRxPbit4Octets Number of Pbit 4 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.19.1.19
rcCfmPbtTrunkStatsRxPbit4Frames Number of P-Bit 4 Packets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.19.1.20
rcCfmPbtTrunkStatsRxPbit5Octets Number of Pbit 5 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.19.1.21
rcCfmPbtTrunkStatsRxPbit5Frames Number of P-Bit 5 Packets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.19.1.22
rcCfmPbtTrunkStatsRxPbit6Octets Number of Pbit64 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.23
rcCfmPbtTrunkStatsRxPbit6Frames Number of P-Bit 6 Packets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.19.1.24
rcCfmPbtTrunkStatsRxPbit7Octets Number of Pbit64 Octets received by the trunk.	SNMPv2-SMICounter64 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.19.1.25
rcCfmPbtTrunkStatsRxPbit7Frames Number of P-Bit 6 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.26
rcCfmPbtTrunkStatsTxPbit0Octets Number of Pbit 0 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.27
rcCfmPbtTrunkStatsTxPbit0Frames Number of P-Bit 0 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.28
rcCfmPbtTrunkStatsTxPbit1Octets Number of Pbit 1 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.29
rcCfmPbtTrunkStatsTxPbit1Frames Number of P-Bit 1 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.30
rcCfmPbtTrunkStatsTxPbit2Octets Number of Pbit 2 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.31
rcCfmPbtTrunkStatsTxPbit2Frames Number of P-Bit 2 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.32
rcCfmPbtTrunkStatsTxPbit3Octets Number of Pbit 3 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.33
rcCfmPbtTrunkStatsTxPbit3Frames Number of P-Bit 3 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.34
rcCfmPbtTrunkStatsTxPbit4Octets Number of Pbit 4 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.35
rcCfmPbtTrunkStatsTxPbit4Frames Number of P-Bit 4 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.36
rcCfmPbtTrunkStatsTxPbit5Octets Number of Pbit 5 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.37
rcCfmPbtTrunkStatsTxPbit5Frames Number of P-Bit 5 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.38
rcCfmPbtTrunkStatsTxPbit6Octets Number of Pbit64 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.19.1.39
rcCfmPbtTrunkStatsTxPbit6Frames Number of P-Bit 6 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.40
rcCfmPbtTrunkStatsTxPbit7Octets Number of Pbit64 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.41
rcCfmPbtTrunkStatsTxPbit7Frames Number of P-Bit 6 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.42

rcCfmPortStatsTable

table

.1.3.6.1.4.1.2272.1.69.20 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmPortStatsTable'

Copy

CFM Port stats table contains the 
port Tx and Rx CFM statistics

rcCfmPortStatsEntry row .1.3.6.1.4.1.2272.1.69.20.1

CFM Port Stats table entry. Contain port's CFM Message
sending/receiving counter.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmPortStatsIndex Slot/Port index	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.20.1.1
rcCfmPortStatsTxCnt The total Number of CFM messages that are sent by port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.20.1.2
rcCfmPortStatsRxCnt The total Number of CFM messages are received by port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.20.1.3

rcCfmFlrTable

table

.1.3.6.1.4.1.2272.1.69.21 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFlrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFlrTable'

Copy

Frame Loss Ratio Profile table

rcCfmFlrEntry row .1.3.6.1.4.1.2272.1.69.21.1

Frame Loss Ratio entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFlrIndex Frame-Loss-Ratio profile index	Integer32	.1.3.6.1.4.1.2272.1.69.21.1.1
rcCfmFlrProfileName Frame-Loss-Ratio Profile Name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.21.1.2
rcCfmFlrRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.21.1.3
rcCfmFlrPriority Frame Loss Ratio messaging runs on COS priority	Integer32r/w	.1.3.6.1.4.1.2272.1.69.21.1.4
rcCfmFlrAlarmThresholdPercent FLR set alarm threshold percentage	Integer32r/w	.1.3.6.1.4.1.2272.1.69.21.1.5
rcCfmFlrAlarmThresholdSubPercent FLR set alarm threshold percentage in 1/100 percent increments	Integer32r/w	.1.3.6.1.4.1.2272.1.69.21.1.6
rcCfmFlrClearThresholdPercent FLR clear alarm threshold percentage	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.21.1.7
rcCfmFlrClearThresholdSubPercent FLR clear alarm threshold percentage in 1/100 percent increments	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.21.1.8
rcCfmFlrThresholdState FLR threshold State	EnableValuer/w Constraints: range: 1-8191 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.21.1.9
rcCfmFlrNumberOfRefs Number of PMs that reference this flr-profile	SNMPv2-SMIGauge32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.21.1.10

rcCfmFdTable

table

.1.3.6.1.4.1.2272.1.69.22 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFdTable'

Copy

CFM Frame Delay and Frame Delay Variation Profile table

rcCfmFdEntry row .1.3.6.1.4.1.2272.1.69.22.1

Frame Delay and Frame Delay Variation entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFdIndex Frame-Delay profile index	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.22.1.1
rcCfmFdProfileName Frame-Delay Profile Name	OctetStringr/w Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.22.1.2
rcCfmFdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 0-7 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.22.1.3
rcCfmFdPriority Frame Delay messaging runs on COS priority	Integer32r/w Enumerated Values: 1 complete 2 incomplete	.1.3.6.1.4.1.2272.1.69.22.1.4
rcCfmFdPerformanceTarget Frame delay performance objective in microseconds	Integer32r/w Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.22.1.5
rcCfmFdAlarmThresholdPercent FD set alarm threshold percentage	Integer32r/w Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.22.1.6
rcCfmFdAlarmThresholdSubPercent FD set alarm threshold percentage in 1/100 percent incr ements	Integer32r/w	.1.3.6.1.4.1.2272.1.69.22.1.7
rcCfmFdClearThresholdPercent FD clear alarm threshold percentage	Integer32r/w	.1.3.6.1.4.1.2272.1.69.22.1.8
rcCfmFdClearThresholdSubPercent FD clear alarm threshold percentage in 1/100 percent in crements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.9
rcCfmFdFdvPerformanceTarget Frame delay variation performance objective in microseconds	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.10
rcCfmFdFdvAlarmThresholdPercent FDV set alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.11
rcCfmFdFdvAlarmThresholdSubPercent FDV set alarm threshold percentage in 1/100 percent inc rements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.12
rcCfmFdFdvClearThresholdPercent FDV clear alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.13
rcCfmFdFdvClearThresholdSubPercent FDV clear alarm threshold percentage in 1/100 percent i ncrements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.14
rcCfmFdThresholdState FD / FDV threshold State	EnableValuer/w Constraints: range: 0-99 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.22.1.15
rcCfmFdNumberOfRefs Number of PM's that referencen this fd-profile	SNMPv2-SMIGauge32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.16

rcCfmFlrStatsInfoTable

table

.1.3.6.1.4.1.2272.1.69.23 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFlrStatsInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFlrStatsInfoTable'

Copy

CFM Frame Loss Ratio Stats Info

rcCfmFlrStatsInfoEntry row .1.3.6.1.4.1.2272.1.69.23.1

Frame Loss Ratio Stats Info entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFlrStatsInfoMdIndex Maintenance Domain Name	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.1
rcCfmFlrStatsInfoMaIndex Maintenance Association Name	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.2
rcCfmFlrStatsInfoMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.3
rcCfmFlrStatsInfoRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.4
rcCfmFlrStatsInfoPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.5
rcCfmFlrStatsInfoMdName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.23.1.6
rcCfmFlrStatsInfoMaName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.23.1.7
rcCfmFlrStatsInfoPriority Frame Loss Ratio messaging runs on COS priority	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.8
rcCfmFlrStatsInfoNearEndPercent Measured near-end FLR percentage	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.9
rcCfmFlrStatsInfoNearEndSubPercent Measured near-end FLR sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.10
rcCfmFlrStatsInfoFarEndPercent Measured far-end FLR percentage	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.11
rcCfmFlrStatsInfoFarEndSubPercent Measured far-end FLR sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.23.1.12
rcCfmFlrStatsInfoPmOperState The operational state of the PM.	RcCfmPmOperState Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.23.1.13

rcCfmFlrStatsCurrTable

table

.1.3.6.1.4.1.2272.1.69.24 · 1 row entry · 39 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFlrStatsCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFlrStatsCurrTable'

Copy

CFM Frame Loss Ratio Stats Current

rcCfmFlrStatsCurrEntry row .1.3.6.1.4.1.2272.1.69.24.1

CFM Frame Loss Ratio Stats Current entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFlrStatsCurrMdIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.1
rcCfmFlrStatsCurrMaIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.2
rcCfmFlrStatsCurrMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.3
rcCfmFlrStatsCurrRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.4
rcCfmFlrStatsCurrPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.5
rcCfmFlrStatsCurrMdName Maintenance Domain Name	OctetString Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.6
rcCfmFlrStatsCurrMaName Maintenance Association Name	OctetString Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.7
rcCfmFlrStatsCurrPriority Frame Loss Ratio messaging runs on COS priority	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.24.1.8
rcCfmFlrStatsCurrPmOperState The operational state of the PM.	RcCfmPmOperState Constraints: range: 1-22 Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.24.1.9
rcCfmFlrStatsCurrStartTime The date and time stamp.	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.24.1.10
rcCfmFlrStatsCurrEndTime The date and time stamp.	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.24.1.11
rcCfmFlrStatsCurrHistInterval History Interval	SNMPv2-SMIGauge32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.12
rcCfmFlrStatsCurrSampleRate Sample rate in seconds	SNMPv2-SMIGauge32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.13
rcCfmFlrStatsCurrNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.14
rcCfmFlrStatsCurrNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.15
rcCfmFlrStatsCurrFarEndPercent Measured far-end FLR percentage	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.16
rcCfmFlrStatsCurrFarEndSubPercent Measured far-end FLR sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.17
rcCfmFlrStatsCurrMinNearEndPercent Measured near-end FLR percentage	Integer32	.1.3.6.1.4.1.2272.1.69.24.1.18
rcCfmFlrStatsCurrMinNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.19
rcCfmFlrStatsCurrMinFarEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.20
rcCfmFlrStatsCurrMinFarEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.21
rcCfmFlrStatsCurrMaxNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.22
rcCfmFlrStatsCurrMaxNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.24.1.23
rcCfmFlrStatsCurrMaxFarEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.24.1.24
rcCfmFlrStatsCurrMaxFarEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.24.1.25
rcCfmFlrStatsCurrTxFrames Tx frames	SNMPv2-SMICounter64 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.24.1.26
rcCfmFlrStatsCurrRxFrames Rx frames	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.27
rcCfmFlrStatsCurrFlFrames Frame Loss frames	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.28
rcCfmFlrStatsCurrTxFarEndFrames Far-end Tx frames	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.29
rcCfmFlrStatsCurrRxFarEndFrames Far-end Rx frames	SNMPv2-SMICounter64 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.30
rcCfmFlrStatsCurrFlFarEndFrames Far-end Frame Loss frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.31
rcCfmFlrStatsCurrSamplesPerInterval Samples per interval	SNMPv2-SMIGauge32 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.24.1.32
rcCfmFlrStatsCurrSamplesTransmitted Samples transmitted	SNMPv2-SMIGauge32 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.24.1.33
rcCfmFlrStatsCurrMinFlFrames Minimum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.34
rcCfmFlrStatsCurrSamplesNotSent Samples not sent	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.35
rcCfmFlrStatsCurrSamplesReceived Samples received	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.36
rcCfmFlrStatsCurrMinFlFarEndFrames Minimum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.37
rcCfmFlrStatsCurrMaxFlFrames Maximum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.38
rcCfmFlrStatsCurrMaxFlFarEndFrames Maximum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.39

rcCfmFlrStatsHistTable

table

.1.3.6.1.4.1.2272.1.69.25 · 1 row entry · 40 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFlrStatsHistTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFlrStatsHistTable'

Copy

CFM Frame Loss Ratio Stats History

rcCfmFlrStatsHistEntry row .1.3.6.1.4.1.2272.1.69.25.1

CFM Frame Loss Ratio Stats History entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFlrStatsHistMdIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.1
rcCfmFlrStatsHistMaIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.2
rcCfmFlrStatsHistMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.3
rcCfmFlrStatsHistRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.4
rcCfmFlrStatsHistPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.5
rcCfmFlrStatsHistIndex History Index	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.6
rcCfmFlrStatsHistMdName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.25.1.7
rcCfmFlrStatsHistMaName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.25.1.8
rcCfmFlrStatsHistPriority Frame Loss Ratio messaging runs on COS priority	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.25.1.9
rcCfmFlrStatsHistStatus The status of this history interval.	Enumeration Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.25.1.10
rcCfmFlrStatsHistStartTime The date and time stamp.	OctetString Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.25.1.11
rcCfmFlrStatsHistEndTime The date and time stamp.	OctetString Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.25.1.12
rcCfmFlrStatsHistHistInterval History Interval	SNMPv2-SMIGauge32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.25.1.13
rcCfmFlrStatsHistSampleRate Sample rate in seconds	SNMPv2-SMIGauge32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.69.25.1.14
rcCfmFlrStatsHistNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.25.1.15
rcCfmFlrStatsHistNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.25.1.16
rcCfmFlrStatsHistFarEndPercent Measured far-end FLR percentage	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.25.1.17
rcCfmFlrStatsHistFarEndSubPercent Measured far-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.25.1.18
rcCfmFlrStatsHistMinNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.25.1.19
rcCfmFlrStatsHistMinNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.25.1.20
rcCfmFlrStatsHistMinFarEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.25.1.21
rcCfmFlrStatsHistMinFarEndSubPercent Measured near-end FLR sub percentage	Integer32 Enumerated Values: 1 complete 2 incomplete	.1.3.6.1.4.1.2272.1.69.25.1.22
rcCfmFlrStatsHistMaxNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.25.1.23
rcCfmFlrStatsHistMaxNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.25.1.24
rcCfmFlrStatsHistMaxFarEndPercent Measured near-end FLR percentage	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.25
rcCfmFlrStatsHistMaxFarEndSubPercent Measured near-end FLR sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.25.1.26
rcCfmFlrStatsHistTxFrames Tx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.27
rcCfmFlrStatsHistRxFrames Rx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.28
rcCfmFlrStatsHistFlFrames Frame Loss frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.29
rcCfmFlrStatsHistTxFarEndFrames Far-end Tx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.30
rcCfmFlrStatsHistRxFarEndFrames Far-end Rx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.31
rcCfmFlrStatsHistFlFarEndFrames Far-end Frame Loss frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.25.1.32
rcCfmFlrStatsHistSamplesPerInterval Samples per interval	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.33
rcCfmFlrStatsHistSamplesTransmitted Samples transmitted	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.34
rcCfmFlrStatsHistMinFlFrames Minimum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.35
rcCfmFlrStatsHistSamplesNotSent Samples not sent	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.36
rcCfmFlrStatsHistSamplesReceived Samples received	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.37
rcCfmFlrStatsHistMinFlFarEndFrames Minimum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.38
rcCfmFlrStatsHistMaxFlFrames Maximum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.39
rcCfmFlrStatsHistMaxFlFarEndFrames Maximum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.25.1.40

rcCfmFdStatsInfoTable

table

.1.3.6.1.4.1.2272.1.69.26 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFdStatsInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFdStatsInfoTable'

Copy

CFM Frame Delay Stats Info

rcCfmFdStatsInfoEntry row .1.3.6.1.4.1.2272.1.69.26.1

Frame Delay Stats Info entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFdStatsInfoMdIndex Maintenance Domain Name	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.26.1.1
rcCfmFdStatsInfoMaIndex Maintenance Association Name	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.26.1.2
rcCfmFdStatsInfoMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.26.1.3
rcCfmFdStatsInfoRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.26.1.4
rcCfmFdStatsInfoPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32	.1.3.6.1.4.1.2272.1.69.26.1.5
rcCfmFdStatsInfoMdName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.26.1.6
rcCfmFdStatsInfoMaName Maintenance Association Name	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.69.26.1.7
rcCfmFdStatsInfoPriority Frame Delay messaging runs on COS priority	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.69.26.1.8
rcCfmFdStatsInfoFdPercent Measured FD percentage	Integer32 Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.69.26.1.9
rcCfmFdStatsInfoFdSubPercent Measured FD sub percentage	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.69.26.1.10
rcCfmFdStatsInfoFdvPercent Measured FDV percentage	Integer32 Enumerated Values: 5 hi5 15 hi15 30 hi30 60 hi60 120 hi120 360 hi360 720 hi720 1440 hi1440	.1.3.6.1.4.1.2272.1.69.26.1.11
rcCfmFdStatsInfoFdvSubPercent Measured FDV sub percentage	Integer32 Enumerated Values: 1 si1 10 si10 30 si30 60 si60 900 si900 1800 si1800 3600 si3600	.1.3.6.1.4.1.2272.1.69.26.1.12
rcCfmFdStatsInfoPmOperState The operational state of the PM.	RcCfmPmOperState Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.26.1.13

rcCfmFdStatsCurrTable

table

.1.3.6.1.4.1.2272.1.69.27 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFdStatsCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFdStatsCurrTable'

Copy

CFM Frame Delay Stats Current

rcCfmFdStatsCurrEntry row .1.3.6.1.4.1.2272.1.69.27.1

CFM Frame Delay Stats Current entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFdStatsCurrMdIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.1
rcCfmFdStatsCurrMaIndex Maintenance Association Name	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.27.1.2
rcCfmFdStatsCurrMepId Maintenance EndPoint ID	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.3
rcCfmFdStatsCurrRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.27.1.4
rcCfmFdStatsCurrPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.5
rcCfmFdStatsCurrMdName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.27.1.6
rcCfmFdStatsCurrMaName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.27.1.7
rcCfmFdStatsCurrPriority Frame Delay messaaging runs on COS priority	Integer32	.1.3.6.1.4.1.2272.1.69.27.1.8
rcCfmFdStatsCurrFdPercent Measured FD percentage	Integer32	.1.3.6.1.4.1.2272.1.69.27.1.9
rcCfmFdStatsCurrFdSubPercent Measured FD sub percentage	Integer32 Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.69.27.1.10
rcCfmFdStatsCurrFdvPercent Measured FDV percentage	Integer32 Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.69.27.1.11
rcCfmFdStatsCurrFdvSubPercent Measured FDV sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.27.1.12
rcCfmFdStatsCurrPmOperState The operational state of the PM.	RcCfmPmOperState Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.27.1.13
rcCfmFdStatsCurrStartTime The date and time stamp.	OctetString	.1.3.6.1.4.1.2272.1.69.27.1.14
rcCfmFdStatsCurrEndTime The date and time stamp.	OctetString	.1.3.6.1.4.1.2272.1.69.27.1.15
rcCfmFdStatsCurrHistInterval History Interval	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.16
rcCfmFdStatsCurrSampleRate Sample rate in seconds	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.17
rcCfmFdStatsCurrTarget FD target in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.18
rcCfmFdStatsCurrAverage FD average in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.19
rcCfmFdStatsCurrMinimum FD minimum in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.20
rcCfmFdStatsCurrMaximum FD maximum in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.21
rcCfmFdStatsCurrFdvTarget FDV target in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.22
rcCfmFdStatsCurrFdvAverage FDV average in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.27.1.23
rcCfmFdStatsCurrFdvMinimum FDV minimum in microseconds	SNMPv2-SMICounter32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.24
rcCfmFdStatsCurrFdvMaximum FDV maximum in microseconds	SNMPv2-SMICounter32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.25
rcCfmFdStatsCurrSamplesPerInterval Samples per interval	SNMPv2-SMIGauge32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.27.1.26
rcCfmFdStatsCurrSamplesTransmitted Samples transmitted	SNMPv2-SMIGauge32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.27
rcCfmFdStatsCurrSamplesNotSent Samples not sent	SNMPv2-SMIGauge32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.27.1.28
rcCfmFdStatsCurrSamplesReceived Samples received	SNMPv2-SMIGauge32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.27.1.29

rcCfmFdStatsHistTable

table

.1.3.6.1.4.1.2272.1.69.28 · 1 row entry · 30 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmFdStatsHistTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmFdStatsHistTable'

Copy

CFM Frame Delay Stats History

rcCfmFdStatsHistEntry row .1.3.6.1.4.1.2272.1.69.28.1

CFM Frame Delay Stats History entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmFdStatsHistMdIndex Maintenance Domain Name	Integer32 Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.28.1.1
rcCfmFdStatsHistMaIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.2
rcCfmFdStatsHistMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.3
rcCfmFdStatsHistRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.69.28.1.4
rcCfmFdStatsHistPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32 Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.69.28.1.5
rcCfmFdStatsHistIndex History Index	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.6
rcCfmFdStatsHistMdName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.28.1.7
rcCfmFdStatsHistMaName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.28.1.8
rcCfmFdStatsHistPriority Frame Delay messaging runs on COS priority	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.9
rcCfmFdStatsHistFdPercent Measured FD percentage	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.10
rcCfmFdStatsHistFdSubPercent Measured FD sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.11
rcCfmFdStatsHistFdvPercent Measured FDV percentage	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.12
rcCfmFdStatsHistFdvSubPercent Measured FDV sub percentage	Integer32	.1.3.6.1.4.1.2272.1.69.28.1.13
rcCfmFdStatsHistStatus The status of this history interval.	Enumeration	.1.3.6.1.4.1.2272.1.69.28.1.14
rcCfmFdStatsHistStartTime The date and time stamp.	OctetString	.1.3.6.1.4.1.2272.1.69.28.1.15
rcCfmFdStatsHistEndTime The date and time stamp.	OctetString	.1.3.6.1.4.1.2272.1.69.28.1.16
rcCfmFdStatsHistHistInterval History Interval	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.17
rcCfmFdStatsHistSampleRate Sample rate in seconds	SNMPv2-SMIGauge32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.69.28.1.18
rcCfmFdStatsHistTarget FD target in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.19
rcCfmFdStatsHistAverage FD average in microseconds	SNMPv2-SMICounter32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.28.1.20
rcCfmFdStatsHistMinimum FD minimum in microseconds	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.21
rcCfmFdStatsHistMaximum FD maximum in microseconds	SNMPv2-SMICounter32 Constraints: range: 1-200	.1.3.6.1.4.1.2272.1.69.28.1.22
rcCfmFdStatsHistFdvTarget FDV target in microseconds	SNMPv2-SMICounter32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.28.1.23
rcCfmFdStatsHistFdvAverage FDV average in microseconds	SNMPv2-SMICounter32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.69.28.1.24
rcCfmFdStatsHistFdvMinimum FDV minimum in microseconds	SNMPv2-SMICounter32 Enumerated Values: 1 allZero 2 allZeroCrc 3 pseudoRandomBitSequence 4 pseudoRandomBitSequenceCrc Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.25
rcCfmFdStatsHistFdvMaximum FDV maximum in microseconds	SNMPv2-SMICounter32 Constraints: range: 0-400	.1.3.6.1.4.1.2272.1.69.28.1.26
rcCfmFdStatsHistSamplesPerInterval Samples per interval	SNMPv2-SMIGauge32 Constraints: range: 0-9600	.1.3.6.1.4.1.2272.1.69.28.1.27
rcCfmFdStatsHistSamplesTransmitted Samples transmitted	SNMPv2-SMIGauge32 Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.28
rcCfmFdStatsHistSamplesNotSent Samples not sent	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.29
rcCfmFdStatsHistSamplesReceived Samples received	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.28.1.30

rcCfmPmTable

table

.1.3.6.1.4.1.2272.1.69.29 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmPmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmPmTable'

Copy

CFM Performance Monitoring Configuration

rcCfmPmEntry row .1.3.6.1.4.1.2272.1.69.29.1

Connectivity Fault Management Performance Monitoring entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmPmMdIndex Maintenance Domain Name	Integer32	.1.3.6.1.4.1.2272.1.69.29.1.1
rcCfmPmMaIndex Maintenance Association Name	Integer32	.1.3.6.1.4.1.2272.1.69.29.1.2
rcCfmPmMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.69.29.1.3
rcCfmPmRmepId Remote Maintenance Endpoint ID. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.29.1.4
rcCfmPmMdName Maintenance Domain Name	OctetString	.1.3.6.1.4.1.2272.1.69.29.1.5
rcCfmPmMaName Maintenance Association Name	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.29.1.6
rcCfmPmRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Constraints: range: 1-16777215 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.29.1.7
rcCfmPmState Performance Monitoring State	EnableValuer/w Constraints: range: 7-7 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.29.1.8
rcCfmPmFdList Comma separated list of Frame-Delay profile names. Valid profile names must first be created using rcCfmFdProfileName. Number of entries in the list is indicated by rcCfmPmFdSize.	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.29.1.9
rcCfmPmFdSize Number of Frame-Delay profiles names	Integer32	.1.3.6.1.4.1.2272.1.69.29.1.10
rcCfmPmFlrList Comma separated list of Frame-Loss-Ratio profile names. Valid profile names must first be created using rcCfmFlrProfileName. Number of entries in the list is indicated by rcCfmPmFlrSize.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.29.1.11
rcCfmPmFlrSize Number of FLR profile names in FLR list	Integer32 Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac	.1.3.6.1.4.1.2272.1.69.29.1.12
rcCfmPmHistoryInterval History summary interval in minutes	minutesEnumerationr/w	.1.3.6.1.4.1.2272.1.69.29.1.13
rcCfmPmSampleRate Sample rate once per sample interval specified in seconds	secondsEnumerationr/w	.1.3.6.1.4.1.2272.1.69.29.1.14

rcCfmLtrTable

table

.1.3.6.1.4.1.2272.1.69.32 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmLtrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmLtrTable'

Copy

This table contains a list of Linktrace replies received 
by a specific MEP in response to a linktrace message.

rcCfmLtrEntry row .1.3.6.1.4.1.2272.1.69.32.1

The Linktrace Reply table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmLtrDomainIndex Maintenance Domain Index	Integer32	.1.3.6.1.4.1.2272.1.69.32.1.1
rcCfmLtrAssociationIndex Maintenance Association Index	Integer32	.1.3.6.1.4.1.2272.1.69.32.1.2
rcCfmLtrMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.69.32.1.3
rcCfmLtrSeqNumber The transaction identifier/sequence number returned by a previous transmit linkrace message command, indicating which LTM's response is going to be returned.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.32.1.4
rcCfmLtrTtl Ttl field value for a returned LTR.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.32.1.5
rcCfmLtrReceiveOrder An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.32.1.6
rcCfmLtrDomainName Maintenance Domain Name	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.32.1.7
rcCfmLtrAssociationName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.32.1.8
rcCfmLtrForwarded Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.	SNMPv2-TCTruthValue Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.32.1.9
rcCfmLtrTerminalMep A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.32.1.10
rcCfmLtrLastEgressIdentifier An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Indicator that originated, or the Linktrace Responder …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.32.1.11
rcCfmLtrNextEgressIdentifier An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM…	OctetString	.1.3.6.1.4.1.2272.1.69.32.1.12
rcCfmLtrRelayAction Value returned in the Relay Action field.	CfmRelayActionFieldValue Type Values: 1 rlyHit 2 rlyFdb 3 rlyMpdb 4 unknown	.1.3.6.1.4.1.2272.1.69.32.1.13
rcCfmLtrSrcMac Mac address of the MP that respond to the LTM request for this LTR	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.32.1.14
rcCfmLtrIngressAction The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM.	CfmIngressActionFieldValue Type Values: 1 ingOk 2 ingDown 3 ingBlocked 4 ingVid 5 ingNoTlv	.1.3.6.1.4.1.2272.1.69.32.1.15
rcCfmLtrIngressMac Mac address returned in the ingress MAC address field. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.32.1.16
rcCfmLtrIngressPortIdSubtype Format of the Ingress Port ID. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.	LldpPortIdSubtype Constraints: range: 0-64 Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.2272.1.69.32.1.17
rcCfmLtrIngressPortId Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrIngressPortIdSubtype object. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are mea…	LldpPortId Constraints: range: 1-200	.1.3.6.1.4.1.2272.1.69.32.1.18
rcCfmLtrEgressAction The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM.	CfmEgressActionFieldValue Constraints: range: 1-10 Type Values: 1 egrOk 2 egrDown 3 egrBlocked 4 egrVid 5 egrNoTlv	.1.3.6.1.4.1.2272.1.69.32.1.19
rcCfmLtrEgressMac Mac address returned in the egress MAC address field. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.	SNMPv2-TCMacAddress Enumerated Values: 1 allZero 2 allZeroCrc 3 pseudoRandomBitSequence 4 pseudoRandomBitSequenceCrc Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.32.1.20
rcCfmLtrEgressPortIdSubtype Format of the Egress Port ID. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.	LldpPortIdSubtype Constraints: range: 0-400 Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.2272.1.69.32.1.21
rcCfmLtrEgressPortId Egress Port ID. The format of this object is determined by the value of the rcCfmLtrEgressPortIdSubtype object. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meanin…	LldpPortId Enumerated Values: 1 ready 2 transmit 3 abort Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.69.32.1.22

rcCfmLtrReplyTable

table

.1.3.6.1.4.1.2272.1.69.33 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmLtrReplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmLtrReplyTable'

Copy

This table contains a list of Linktrace replies received 
by a specific MEP in response to a linktrace message.

rcCfmLtrReplyEntry row .1.3.6.1.4.1.2272.1.69.33.1

The Linktrace Reply table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmLtrReplyDomainIndex Maintenance Domain Index	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.1
rcCfmLtrReplyAssociationIndex Maintenance Association Index	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.2
rcCfmLtrReplyMepId Maintenance EndPoint ID	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.3
rcCfmLtrReplySeqNumber The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.4
rcCfmLtrReplyHop The number of hops away from LTM initiator	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.5
rcCfmLtrReplyReceiveOrder An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.33.1.6
rcCfmLtrReplyTtl Ttl field value for a returned LTR.	Integer32	.1.3.6.1.4.1.2272.1.69.33.1.7
rcCfmLtrReplyDomainName Maintenance Domain Name	OctetString Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.69.33.1.8
rcCfmLtrReplyAssociationName Maintenance Association Name	OctetString	.1.3.6.1.4.1.2272.1.69.33.1.9
rcCfmLtrReplyForwarded Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.33.1.10
rcCfmLtrReplyTerminalMep A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.	SNMPv2-TCTruthValue Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.33.1.11
rcCfmLtrReplyLastEgressIdentifier An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Indicator that originated, or the Linktrace Responder …	OctetString Constraints: range: 0-9600	.1.3.6.1.4.1.2272.1.69.33.1.12
rcCfmLtrReplyNextEgressIdentifier An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM…	OctetString	.1.3.6.1.4.1.2272.1.69.33.1.13
rcCfmLtrReplyRelayAction Value returned in the Relay Action field.	CfmRelayActionFieldValue Type Values: 1 rlyHit 2 rlyFdb 3 rlyMpdb 4 unknown	.1.3.6.1.4.1.2272.1.69.33.1.14
rcCfmLtrReplySrcMac Mac address of the MP that respond to the LTM request for this LTR	SNMPv2-TCMacAddress Constraints: range: 0-100 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.33.1.15
rcCfmLtrReplyIngressAction The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM.	CfmIngressActionFieldValue Constraints: range: 0-100 Type Values: 1 ingOk 2 ingDown 3 ingBlocked 4 ingVid 5 ingNoTlv	.1.3.6.1.4.1.2272.1.69.33.1.16
rcCfmLtrReplyIngressMac Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.33.1.17
rcCfmLtrReplyIngressPortIdSubtype Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.	LldpPortIdSubtype Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.2272.1.69.33.1.18
rcCfmLtrReplyIngressPortId Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this obj…	LldpPortId Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.69.33.1.19
rcCfmLtrReplyEgressAction The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM.	CfmEgressActionFieldValue Type Values: 1 egrOk 2 egrDown 3 egrBlocked 4 egrVid 5 egrNoTlv	.1.3.6.1.4.1.2272.1.69.33.1.20
rcCfmLtrReplyEgressMac Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.	SNMPv2-TCMacAddress Enumerated Values: 1 none 2 internalError 3 invalidMac 4 mepDisabled 5 invalidMD 6 invalidMA 7 noMepFound 8 unknownServiceInstance 9 l2PingToOwnMepMac 10 l2PingComplete Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.33.1.21
rcCfmLtrReplyEgressPortIdSubtype Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.	LldpPortIdSubtype Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.2272.1.69.33.1.22
rcCfmLtrReplyEgressPortId Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object …	LldpPortId Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.69.33.1.23

rcCfmTransmitL2PingTable

table

.1.3.6.1.4.1.2272.1.69.34 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitL2PingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitL2PingTable'

Copy

Connectivity Fault Management transmit L2Ping table

rcCfmTransmitL2PingEntry row .1.3.6.1.4.1.2272.1.69.34.1

Connectivity Fault Management Maintenance EndPoint L2Ping entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitL2PingVlanId A value that uniquely identifies the Customer Vlan	Integer32	.1.3.6.1.4.1.2272.1.69.34.1.1
rcCfmTransmitL2PingDestMacAddress An indication of the target MAC Address field to be transmitted	SNMPv2-TCMacAddressr/w Constraints: range: 0-64 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.34.1.2
rcCfmTransmitL2PingHostName The target host name	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.34.1.3
rcCfmTransmitL2PingDestIsHostName True indicates that the host name is used for L2Ping transmission	SNMPv2-TCTruthValuer/w Enumerated Values: 1 ready 2 transmit 3 abort Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.34.1.4
rcCfmTransmitL2PingMessages The number of L2Ping messages to be transmitted.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.34.1.5
rcCfmTransmitL2PingPriority Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.34.1.6
rcCfmTransmitL2PingTimeoutInt The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.34.1.7
rcCfmTransmitL2PingTestPattern The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning --…	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.34.1.8
rcCfmTransmitL2PingDataSize An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.34.1.9
rcCfmTransmitL2PingFrameSize If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.	Integer32r/w	.1.3.6.1.4.1.2272.1.69.34.1.10
rcCfmTransmitL2PingSourceMode Source modes of the transmit loopback service.	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.34.1.11
rcCfmTransmitL2PingSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.34.1.12
rcCfmTransmitL2PingResultOk Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent.	SNMPv2-TCTruthValue Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.34.1.13
rcCfmTransmitL2PingStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -abort The service is aborted or ab…	Enumerationr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.34.1.14
rcCfmTransmitL2PingResult Display the L2Ping result.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.34.1.15

rcCfmTransmitL2TraceTable

table

.1.3.6.1.4.1.2272.1.69.35 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitL2TraceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitL2TraceTable'

Copy

Connectivity Fault Management transmit L2Trace table

rcCfmTransmitL2TraceEntry row .1.3.6.1.4.1.2272.1.69.35.1

Connectivity Fault Management Maintenance EndPoint L2Trace entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitL2TraceVlanId A value that uniquely identifies the Customer Vlan	Integer32	.1.3.6.1.4.1.2272.1.69.35.1.1
rcCfmTransmitL2TracePriority Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.35.1.2
rcCfmTransmitL2TraceDestMacAddress An indication of the target MAC Address field to be transmitted	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.35.1.3
rcCfmTransmitL2TraceHostName The target host name	OctetStringr/w	.1.3.6.1.4.1.2272.1.69.35.1.4
rcCfmTransmitL2TraceIsid Isid Id	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.35.1.5
rcCfmTransmitL2TraceNickName Local Node nick name	OctetString	.1.3.6.1.4.1.2272.1.69.35.1.6
rcCfmTransmitL2TraceDestIsHostName True indicates that the host name is used for L2Trace transmission	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.35.1.7
rcCfmTransmitL2TraceIsidTree True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced	SNMPv2-TCTruthValuer/w Enumerated Values: 1 none 2 internalError 3 invalidMac 4 mepDisabled 5 noL2TraceResponse 6 l2TraceToOwnMepMac 7 l2TraceComplete 8 l2TraceLookupFailure Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.35.1.8
rcCfmTransmitL2TraceTtl The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next ho…	Integer32r/w	.1.3.6.1.4.1.2272.1.69.35.1.9
rcCfmTransmitL2TraceSourceMode Source modes of the transmit loopback service.	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.35.1.10
rcCfmTransmitL2TraceSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.35.1.11
rcCfmTransmitL2TraceResultOk Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.35.1.12
rcCfmTransmitL2TraceStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or a…	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.35.1.13
rcCfmTransmitL2TraceFlag L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to pe…	Enumeration	.1.3.6.1.4.1.2272.1.69.35.1.14

rcCfmL2TraceReplyTable

table

.1.3.6.1.4.1.2272.1.69.36 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmL2TraceReplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmL2TraceReplyTable'

Copy

This table contains a list of l2trace replies received 
by a specific MEP in response to a linktrace message.

rcCfmL2TraceReplyEntry row .1.3.6.1.4.1.2272.1.69.36.1

The Linktrace Reply table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmL2TraceReplyVlanId A value that uniquely identifies the Customer Vlan	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.69.36.1.1
rcCfmL2TraceReplySeqNumber The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be returned.	Integer32	.1.3.6.1.4.1.2272.1.69.36.1.2
rcCfmL2TraceReplyHop The number of hops away from L2Trace initiator.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.36.1.3
rcCfmL2TraceReplyReceiveOrder An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.36.1.4
rcCfmL2TraceReplyTtl Ttl field value for a returned L2Trace response.	Integer32	.1.3.6.1.4.1.2272.1.69.36.1.5
rcCfmL2TraceReplySrcMac Mac address of the MP that respond to the L2Trace request for this L2traceReply	SNMPv2-TCMacAddress Enumerated Values: 1 ready 2 transmit 3 abort Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.36.1.6
rcCfmL2TraceReplyHostName The host name of the replying node	OctetString	.1.3.6.1.4.1.2272.1.69.36.1.7
rcCfmL2TraceReplyLastSrcMac The MAC address of the node that forwarded the L2Trace to the responding node	SNMPv2-TCMacAddress Enumerated Values: 1 none 2 internalError 3 mepDisabled 4 noResponse 5 traceComplete 6 leafNode 7 noDataIsidFound Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.36.1.8
rcCfmL2TraceReplyLastHostName The host name of the node that forwarded the L2Trace to the responding node	OctetString	.1.3.6.1.4.1.2272.1.69.36.1.9

rcCfmTransmitL2IpPingTable

table

.1.3.6.1.4.1.2272.1.69.37 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitL2IpPingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitL2IpPingTable'

Copy

Connectivity Fault Management transmit L2IpPing table

rcCfmTransmitL2IpPingEntry row .1.3.6.1.4.1.2272.1.69.37.1

L2IpPing entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitL2IpPingIpAddrType The address type of destination IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.37.1.1
rcCfmTransmitL2IpPingIpAddr Destination IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.37.1.2
rcCfmTransmitL2IpPingVrfId VRF ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.37.1.3
rcCfmTransmitL2IpPingVrfName The Name of the Virtual Router	OctetString Enumerated Values: 1 vlan 2 vrfid	.1.3.6.1.4.1.2272.1.69.37.1.4
rcCfmTransmitL2IpPingMessages The number of L2IpPing messages to be transmitted per mac/vlan pair.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.69.37.1.5
rcCfmTransmitL2IpPingTimeoutInt The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.37.1.6
rcCfmTransmitL2IpPingTestPattern The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning…	Enumerationr/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.37.1.7
rcCfmTransmitL2IpPingDataSize An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.37.1.8
rcCfmTransmitL2IpPingStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages. -abort The service is aborted or …	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.69.37.1.9
rcCfmTransmitL2IpPingResultOk Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.37.1.10
rcCfmTransmitL2IpPingPathsFound The number of paths found to execute l2ping command	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.37.1.11
rcCfmTransmitL2IpPingRowStatus Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries being deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.37.1.12

rcCfmL2IpPingReplyTable

table

.1.3.6.1.4.1.2272.1.69.38 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmL2IpPingReplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmL2IpPingReplyTable'

Copy

This table contains a list of l2 ip ping replies received

rcCfmL2IpPingReplyEntry row .1.3.6.1.4.1.2272.1.69.38.1

The L2 Ip Ping Reply table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmL2IpPingReplyIpAddrType The address type of destination IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.38.1.1
rcCfmL2IpPingReplyIpAddr Destination IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.69.38.1.2
rcCfmL2IpPingReplySendOrder An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2I…	Integer32	.1.3.6.1.4.1.2272.1.69.38.1.3
rcCfmL2IpPingReplyVrfId VRF ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.38.1.4
rcCfmL2IpPingReplyVlanId Vlan found from L3 lookup and used for transmission	Integer32	.1.3.6.1.4.1.2272.1.69.38.1.5
rcCfmL2IpPingReplyDestMacAddress An indication of the target MAC Address transmitted	SNMPv2-TCMacAddress Enumerated Values: 0 ddm-ok 1 ddm-checksum-error 2 ddm-i2c-read-error 3 ddm-threshold-error 4 ddm-calibration-error 5 ddm-avaya-checksum-error Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.38.1.6
rcCfmL2IpPingReplyPortNum Either the value '0', or the port number of the port used for the l2ping.	InterfaceIndex Enumerated Values: 1 internal 2 external Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.38.1.7
rcCfmL2IpPingReplyDestHostName The host name of the responding node	OctetString Enumerated Values: 1 omi 2 average	.1.3.6.1.4.1.2272.1.69.38.1.8
rcCfmL2IpPingReplySize The number of bytes of data sent	Integer32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.69.38.1.9
rcCfmL2IpPingReplyPktsTx Number of Packets transmitted for this vlan/mac	SNMPv2-SMIInteger32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.69.38.1.10
rcCfmL2IpPingReplyPktsRx Number of Packets received for this vlan/mac	SNMPv2-SMIInteger32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.69.38.1.11
rcCfmL2IpPingReplyPercentLossWhole Percentage of packet loss for this vlan/mac	Integer32 Constraints: range: 5-5	.1.3.6.1.4.1.2272.1.69.38.1.12
rcCfmL2IpPingReplyPercentLossFract Percentage of packet loss for this vlan/mac	Integer32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.69.38.1.13
rcCfmL2IpPingReplyMinRoundTrip Min time for round-trip for this vlan/mac in us	SNMPv2-SMIInteger32 Constraints: range: 9-9	.1.3.6.1.4.1.2272.1.69.38.1.14
rcCfmL2IpPingReplyMaxRoundTrip Max time for round-trip for this vlan/mac in us	SNMPv2-SMIInteger32 Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.69.38.1.15
rcCfmL2IpPingReplyRttAvgWhole Average time for round-trip for this vlan/mac in us	SNMPv2-SMIInteger32 Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.38.1.16
rcCfmL2IpPingReplyRttAvgFract Fractional portion of Average time for round-trip	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.38.1.17
rcCfmL2IpPingReplyFlag Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace completed 5 - Lookup failure for IP (no vlan/mac entries)	Enumeration Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.69.38.1.18

rcCfmTransmitL2IpTraceTable

table

.1.3.6.1.4.1.2272.1.69.39 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitL2IpTraceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitL2IpTraceTable'

Copy

Connectivity Fault Management transmit L2IpTrace table

rcCfmTransmitL2IpTraceEntry row .1.3.6.1.4.1.2272.1.69.39.1

L2IpTrace entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitL2IpTraceIpAddrType The address type of destination IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.39.1.1
rcCfmTransmitL2IpTraceIpAddr Destination IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.39.1.2
rcCfmTransmitL2IpTraceVrfId VRF ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.39.1.3
rcCfmTransmitL2IpTraceVrfName The Name of the Virtual Router	OctetString	.1.3.6.1.4.1.2272.1.69.39.1.4
rcCfmTransmitL2IpTraceTtl The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next ho…	Integer32r/w	.1.3.6.1.4.1.2272.1.69.39.1.5
rcCfmTransmitL2IpTraceStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or a…	Enumerationr/w	.1.3.6.1.4.1.2272.1.69.39.1.6
rcCfmTransmitL2IpTraceResultOk Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.39.1.7
rcCfmTransmitL2IpTracePathsFound The number of paths found to execute l2trace command	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.39.1.8
rcCfmTransmitL2IpTraceRowStatus Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries being deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.39.1.9

rcCfmL2IpTraceReplyTable

table

.1.3.6.1.4.1.2272.1.69.40 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmL2IpTraceReplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmL2IpTraceReplyTable'

Copy

This table contains a list of l2 ip trace replies received 
by a specific MEP in response to a linktrace message.

rcCfmL2IpTraceReplyEntry row .1.3.6.1.4.1.2272.1.69.40.1

The L2 Ip Trace Reply table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmL2IpTraceReplyIpAddrType The address type of destination IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.40.1.1
rcCfmL2IpTraceReplyIpAddr Destination IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.40.1.2
rcCfmL2IpTraceReplySendOrder An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2…	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.3
rcCfmL2IpTraceReplyHop The number of L2 hops away from L2Trace initiator.	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.4
rcCfmL2IpTraceReplyReceiveOrder An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the resp…	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.5
rcCfmL2IpTraceReplyTtl Ttl field value for a returned L2Trace response.	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.6
rcCfmL2IpTraceReplyVrfId VRF ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.40.1.7
rcCfmL2IpTraceReplyVlanId Vlan found from L3 lookup and used for transmission	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.8
rcCfmL2IpTraceReplyDestMacAddress An indication of the target MAC Address transmitted	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.40.1.9
rcCfmL2IpTraceReplySeqNumber The transaction identifier/sequence number used in linktrace message packet	Integer32	.1.3.6.1.4.1.2272.1.69.40.1.10
rcCfmL2IpTraceReplyPortNum Either the value '0', or the port number of the port used for the l2trace.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.69.40.1.11
rcCfmL2IpTraceReplySrcMac Mac address of the MP that responded to L2Trace request for this L2traceReply	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.40.1.12
rcCfmL2IpTraceReplyHostName The host name of the replying node	OctetString	.1.3.6.1.4.1.2272.1.69.40.1.13
rcCfmL2IpTraceReplyLastSrcMac The MAC address of the node that forwarded the L2Trace to the responding node	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.40.1.14
rcCfmL2IpTraceReplyLastHostName The host name of the node that forwarded the L2Trace to the responding node	OctetString	.1.3.6.1.4.1.2272.1.69.40.1.15
rcCfmL2IpTraceReplyFlag L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to perform L2…	Enumeration	.1.3.6.1.4.1.2272.1.69.40.1.16

rcCfmTransmitL2McastTraceTable

table

.1.3.6.1.4.1.2272.1.69.41 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmTransmitL2McastTraceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmTransmitL2McastTraceTable'

Copy

This table contains a list of l2 multicast route trace
requests.

rcCfmTransmitL2McastTraceEntry row .1.3.6.1.4.1.2272.1.69.41.1

CFM Transmit L2 Multicast Trace Entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmTransmitL2McastTraceSrcIpAddrType The address type of Source IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.41.1.1
rcCfmTransmitL2McastTraceSrcIpAddr Source IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.41.1.2
rcCfmTransmitL2McastTraceGroupIpAddrType The address type of Multicast Group IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.41.1.3
rcCfmTransmitL2McastTraceGroupIpAddr Multicast Group IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.41.1.4
rcCfmTransmitL2McastTraceServiceType Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id	Enumeration	.1.3.6.1.4.1.2272.1.69.41.1.5
rcCfmTransmitL2McastTraceServiceId Value of VLAN or VRF-Id. Meaning controlled by rcCfmTransmitL2McastTraceServiceType. Value must be valid for type (e.g. VLAN range 1..4094)	Integer32	.1.3.6.1.4.1.2272.1.69.41.1.6
rcCfmTransmitL2McastTraceVrfName The name of the Virtual Router of the originator	OctetString Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.41.1.7
rcCfmTransmitL2McastTraceRowStatus Used to create/delete entries in the rcCfmTransmitL2McastTraceTable. Deletion of an entry in this table results in a corresponding rcCfmL2McastTraceReplyTable entries being deleted	SNMPv2-TCRowStatusr/w Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.41.1.8
rcCfmTransmitL2McastTracePriority Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.	Integer32r/w Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.41.1.9
rcCfmTransmitL2McastTraceTtl The number of hops remaining to this trace. Decremented by 1 by each Bridge that handles trace. If 0 on output, the trace is not transmitted to the next hop. The value of the TTL Field in the trace trasnmitted by orig…	Integer32r/w Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.41.1.10
rcCfmTransmitL2McastTraceSeqNumber The transaction identifier/sequence number of the first message (to be) sent.	SNMPv2-SMIInteger32 Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.41.1.11
rcCfmTransmitL2McastTraceStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit the trace messages. -abort The service is aborted or abou…	Enumerationr/w Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.41.1.12
rcCfmTransmitL2McastTraceResultOk Indicates the result of the operation: -true. The Trace Message(s) will/have been sent. -false. The Trace Message(s) will not be sent.	SNMPv2-TCTruthValue Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.41.1.13
rcCfmTransmitL2McastTraceFlag Result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Mep must be enabled in order to perform trace 4 - No response received 5 -…	Enumeration	.1.3.6.1.4.1.2272.1.69.41.1.14

rcCfmL2McastTraceReplyTable

table

.1.3.6.1.4.1.2272.1.69.42 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCfmL2McastTraceReplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCfmL2McastTraceReplyTable'

Copy

This table contains a list of multicast route trace
replies received by a specific MEP in response to a
trace message.

rcCfmL2McastTraceReplyEntry row .1.3.6.1.4.1.2272.1.69.42.1

The L2 Multicast Trace Reply Table Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcCfmL2McastTraceReplySrcIpAddrType The address type of Source IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.42.1.1
rcCfmL2McastTraceReplySrcIpAddr Source IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.42.1.2
rcCfmL2McastTraceReplyGroupIpAddrType The address type of Multicast Group IP Address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.69.42.1.3
rcCfmL2McastTraceReplyGroupIpAddr Multicast Group IP Address. Support ipv4 at this time	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.69.42.1.4
rcCfmL2McastTraceReplyServiceType Service type indicates what value of service id means. vlan - indicates value maps to VLAN vrfid - indicates value maps to a VRF Id	Enumeration	.1.3.6.1.4.1.2272.1.69.42.1.5
rcCfmL2McastTraceReplyServiceId Value of VLAN or VRF-Id. Meaning controlled by rcCfmL2McastTraceReplyServiceType. Value must be valid for type (e.g. VLAN range 1..4094)	Integer32	.1.3.6.1.4.1.2272.1.69.42.1.6
rcCfmL2McastTraceReplyHop The number of hops away from trace initiator	Integer32	.1.3.6.1.4.1.2272.1.69.42.1.7
rcCfmL2McastTraceReplyReceiveOrder An index to distinguish among multiple responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses.	Integer32	.1.3.6.1.4.1.2272.1.69.42.1.8
rcCfmL2McastTraceReplyTtl Ttl field value for a returned trace response.	Integer32	.1.3.6.1.4.1.2272.1.69.42.1.9
rcCfmL2McastTraceReplyVrfName The name of the Virtual Router of the originator	OctetString Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.42.1.10
rcCfmL2McastTraceReplySrcMac Mac address of the MP that respond to the trace request	SNMPv2-TCMacAddress Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.42.1.11
rcCfmL2McastTraceReplyHostName The host name of the replying node	OctetString Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.42.1.12
rcCfmL2McastTraceReplyLastSrcMac The MAC address of the node that forwarded the trace to the responding node	SNMPv2-TCMacAddress Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.42.1.13
rcCfmL2McastTraceReplyLastHostName The host name of the node that forwarded the trace to the responding node	OctetString Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.42.1.14
rcCfmL2McastTraceReplySpbmVlanId The SPBM VLAN id used for the trace	SNMPv2-SMIInteger32 Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.42.1.15
rcCfmL2McastTraceReplyBMac The multicast MAC address for the group	SNMPv2-TCMacAddress Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.42.1.16
rcCfmL2McastTraceReplyIsid Isid id for the group	Integer32 Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.69.42.1.17

rcPlugOptModTable

table

.1.3.6.1.4.1.2272.1.71.1 · 1 row entry · 82 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPlugOptModTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPlugOptModTable'

Copy

Gbic SFF diagnostic info table

rcPlugOptModEntry row .1.3.6.1.4.1.2272.1.71.1.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPlugOptModPortIndex An index value that uniquely identifies a port on a blade or line-card.	InterfaceIndex Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.1
rcPlugOptModDdmStatusMask Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed.	Bits Enumerated Values: 1 normal 2 highWarning 3 highAlarm 4 lowWarning 5 lowAlarm	.1.3.6.1.4.1.2272.1.71.1.1.2
rcPlugOptModCalibration The identifier value indicates type of calibration.	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.3
rcPlugOptModPowerMeasure The identifier value indicates type of external power.	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.4
rcPlugOptModConnectorType The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name that indicates some characteristic of the layer-1 interface.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.5
rcPlugOptModVendorName The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation…	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.6
rcPlugOptModVendorPartNumber The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part number or product name.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.7
rcPlugOptModVendorRevNumber The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor product revision number.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.8
rcPlugOptModVendorSN The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor serial number for the transceiver.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.9
rcPlugOptModVendorDateCode The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low order digits of the year (00=2000), MM is the month, 01 thru 12,…	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.10
rcPlugOptModPEC This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, so the 10th through 16th byte should be NULL.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.11
rcPlugOptModCLEI This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telcordia human-readable representation of the 1D barcode.	OctetString	.1.3.6.1.4.1.2272.1.71.1.1.12
rcPlugOptModSupportsDDM This boolean indicates whether or not the device supports the DDM capability.	SNMPv2-TCTruthValue Enumerated Values: 1 initialize 2 backup 3 master Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.71.1.1.13
rcPlugOptModAux1Monitoring This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 L…	Integer32 Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2272.1.71.1.1.14
rcPlugOptModAux2Monitoring This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature …	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.71.1.1.15
rcPlugOptModWaveLength Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.71.1.1.16
rcPlugOptModTemperature This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0.0001 accuracy.The most significant byte is the signed inte…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.17
rcPlugOptModTemperatureHighAlarmThreshold This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expressed in the same units as the measured temperature.	SNMPv2-SMIInteger32 Enumerated Values: 1 noAuthentication 2 simpleTextPassword 3 ipAuthenticationHeader Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.18
rcPlugOptModTemperatureLowAlarmThreshold This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is expressed in the same units as the measured temperature.	SNMPv2-SMIInteger32 Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.71.1.1.19
rcPlugOptModTemperatureHighWarningThreshold This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asserted. It is expressed in the same units as the measured temp…	SNMPv2-SMIInteger32 Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.71.1.1.20
rcPlugOptModTemperatureLowWarningThreshold This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is asserted. It is expressed in the same units as the measured te…	SNMPv2-SMIInteger32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.71.1.1.21
rcPlugOptModVoltage This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV.	SNMPv2-SMIInteger32 Enumerated Values: 1 true 2 false Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.22
rcPlugOptModVoltageHighAlarmThreshold This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive number expressed in microvolts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.23
rcPlugOptModVoltageLowAlarmThreshold This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive number expressed in microvolts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.24
rcPlugOptModVoltageHighWarningThreshold This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It is a positive number expressed in microvolts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.25
rcPlugOptModVoltageLowWarningThreshold This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It is a positive number expressed in microvolts.	SNMPv2-SMIInteger32 Constraints: range: 0-21600	.1.3.6.1.4.1.2272.1.71.1.1.26
rcPlugOptModBias This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 0.1 microamp and can range from 0 to 131 mA with +/-10% accuracy.	SNMPv2-SMIInteger32 Enumerated Values: 1 dormant 2 active Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.27
rcPlugOptModBiasHighAlarmThreshold This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a positive number expressed in units of 0.1 microamp.	SNMPv2-SMIInteger32 Constraints: range: 0-21600	.1.3.6.1.4.1.2272.1.71.1.1.28
rcPlugOptModBiasLowAlarmThreshold This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a positive number in units of 0.1 microamp.	SNMPv2-SMIInteger32 Enumerated Values: 1 none 2 preemptHoldDownTimer Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.29
rcPlugOptModBiasHighWarningThreshold This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted. It is a positive number expressed in in units of 0.1 microa…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.30
rcPlugOptModBiasLowWarningThreshold This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserted. It is a positive number in units of 0.1 microamp.	SNMPv2-SMIInteger32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.31
rcPlugOptModTxPower This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Enumerated Values: 1 up 2 down Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.32
rcPlugOptModTxPowerHighAlarmThreshold This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is asserted. It is a positive number expressed in units of micro w…	SNMPv2-SMIInteger32 Constraints: range: 200-1000	.1.3.6.1.4.1.2272.1.71.1.1.33
rcPlugOptModTxPowerLowAlarmThreshold This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is asserted. It is a positive number expressed in units of micro…	SNMPv2-SMIInteger32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.34
rcPlugOptModTxPowerHighWarningThreshold This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power high warning is asserted. It is a positive number expressed in …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.35
rcPlugOptModTxPowerLowWarningThreshold This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power low warning is asserted. It is a positive number expressed i…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.36
rcPlugOptModRxPower This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.37
rcPlugOptModRxPowerHighAlarmThreshold This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts a…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.38
rcPlugOptModRxPowerLowAlarmThreshold This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserted. It is a positive number expressed in units of micro watts…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.39
rcPlugOptModRxPowerHighWarningThreshold This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warning is asserted. It is a positive number expressed in units …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.40
rcPlugOptModRxPowerLowWarningThreshold This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low warning is asserted. It is a positive number expressed in unit…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.41
rcPlugOptModAux1 This represents the internally measured A/D value specified.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.42
rcPlugOptModAux1HighAlarmThreshold This value represents the vendor specified high Aux1 threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.43
rcPlugOptModAux1LowAlarmThreshold This value represents the vendor specified low Aux1 threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.44
rcPlugOptModAux1HighWarningThreshold This value represents the vendor specified high Aux1 warning threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.45
rcPlugOptModAux1LowWarningThreshold This value represents the vendor specified low Aux1 warning threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.46
rcPlugOptModAux2 This represents the internally measured A/D value specified.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.47
rcPlugOptModAux2HighAlarmThreshold This value represents the vendor specified high Aux1 threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.48
rcPlugOptModAux2LowAlarmThreshold This value represents the vendor specified low Aux1 threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.49
rcPlugOptModAux2HighWarningThreshold This value represents the vendor specified high Aux1 warning threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.50
rcPlugOptModAux2LowWarningThreshold This value represents the vendor specified low Aux1 warning threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.51
rcPlugOptModTemperatureStatus Used to indicate the current temperature status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.52
rcPlugOptModVoltageStatus Used to indicate the current voltage status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.53
rcPlugOptModBiasStatus Used to indicate the current laser bias status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.54
rcPlugOptModTxPowerStatus Used to indicate the current transmitter power status	Enumeration Constraints: range: 0-33	.1.3.6.1.4.1.2272.1.71.1.1.55
rcPlugOptModRxPowerStatus Used to indicate the current receiver power status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.56
rcPlugOptModAux1Status Used to indicate the current Aux1 status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.57
rcPlugOptModAux2Status Used to indicate the current Aux2 status	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.58
rcPlugOptModQSFPTx1Bias This value represents the internally measured transmitter laser bias current in channel 1 of QSFP.. It is a positive number expressed in units of 0.1 microamp and can range from 0 to 131 mA with +/-10% accuracy.	SNMPv2-SMIInteger32 Enumerated Values: 1 up 2 down Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.59
rcPlugOptModQSFPTx2Bias This value represents the internally measured transmitter laser bias current in channel 2 of QSFP.. It is a positive number expressed in units of 0.1 microamp and can range from 0 to 131 mA with +/-10% accuracy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.60
rcPlugOptModQSFPTx3Bias This value represents the internally measured transmitter laser bias current in channel 3 of QSFP.. It is a positive number expressed in units of 0.1 microamp and can range from 0 to 131 mA with +/-10% accuracy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.61
rcPlugOptModQSFPTx4Bias This value represents the internally measured transmitter laser bias current in channel 4 of QSFP.. It is a positive number expressed in units of 0.1 microamps and can range from 0 to 131 mA with +/-10% accuracy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.62
rcPlugOptModQSFPTx1Power This value represents the internally measured TX output power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.63
rcPlugOptModQSFPTx2Power This value represents the internally measured TX output power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.64
rcPlugOptModQSFPTx3Power This value represents the internally measured TX output power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Enumerated Values: 1 rsvp-static 2 ldp-static 3 ldp-dynamic Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.65
rcPlugOptModQSFPTx4Power This value represents the internally measured TX output power in channel 4 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.66
rcPlugOptModQSFPRx1Power This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.67
rcPlugOptModQSFPRx2Power This value represents the internally measured received power in channel 2 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.68
rcPlugOptModQSFPRx3Power This value represents the internally measured received power in channel 3 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.69
rcPlugOptModQSFPRx4Power This value represents the internally measured received power in channel 1 of QSFP. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.71.1.1.70
rcPlugOptModQSFPTx1BiasStatus Used to indicate the current laser bias status in channel 1 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.71
rcPlugOptModQSFPTx2BiasStatus Used to indicate the current laser bias status in channel 2 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.72
rcPlugOptModQSFPTx3BiasStatus Used to indicate the current laser bias status in channel 3 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.73
rcPlugOptModQSFPTx4BiasStatus Used to indicate the current laser bias status in channel 4 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.74
rcPlugOptModQSFPTx1PowerStatus Used to indicate the current transmitter power status in channel 1 of QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.75
rcPlugOptModQSFPTx2PowerStatus Used to indicate the current transmitter power status in channel 2 of QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.76
rcPlugOptModQSFPTx3PowerStatus Used to indicate the current transmitter power status in channel 3 of QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.77
rcPlugOptModQSFPTx4PowerStatus Used to indicate the current transmitter power status in channel 4 of QSFP	Enumeration Constraints: range: 64-687	.1.3.6.1.4.1.2272.1.71.1.1.78
rcPlugOptModQSFPRx1PowerStatus Used to indicate the current receiver power status in channel 1 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.79
rcPlugOptModQSFPRx2PowerStatus Used to indicate the current receiver power status in channel 2 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.80
rcPlugOptModQSFPRx3PowerStatus Used to indicate the current receiver power status in channel 3 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.81
rcPlugOptModQSFPRx4PowerStatus Used to indicate the current receiver power status in channel 4 for QSFP	Enumeration	.1.3.6.1.4.1.2272.1.71.1.1.82

rcPlugOptModOperTable

table

.1.3.6.1.4.1.2272.1.71.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPlugOptModOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPlugOptModOperTable'

Copy

Gbic QSFP table

rcPlugOptModOperEntry row .1.3.6.1.4.1.2272.1.71.3.1

Entry containing info. for a particular port

Indexes

No indexes recorded

Column	Syntax	OID
rcPlugOptModOperPortIndex An index value that uniquely identifies a port on a blade or line-card.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.71.3.1.1
rcPlugOptModOperReset This operational object is used to reset the QSFP on the port. It always return FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.71.3.1.2

rcVrrpOperTable

table

.1.3.6.1.4.1.2272.1.73.1.1.2 · 1 row entry · 26 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpOperTable'

Copy

Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'rcVrrpOperEntry' items.

rcVrrpOperEntry row .1.3.6.1.4.1.2272.1.73.1.1.2.1

An entry in the rcVrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpOperIfIndex port interface index.	InterfaceIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.73.1.1.2.1.1
rcVrrpOperVrId This object contains the Virtual Router Identifier (VRID).	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.73.1.1.2.1.2
rcVrrpOperIpAddr The assigned IP addresses that a virtual router is responsible for backing up.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.73.1.1.2.1.3
rcVrrpOperVirtualMacAddr The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-<VRID>. Where the first three octets consist of the IANA's OUI; The next two octets indicate the address block of …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.73.1.1.2.1.4
rcVrrpOperState The current state of the virtual router.	Enumeration	.1.3.6.1.4.1.2272.1.73.1.1.2.1.5
rcVrrpOperControl This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the ro…	Enumerationr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.6
rcVrrpOperPriority This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more associated IP addresses. Higher values imply higher priority. …	Integer32r/w Constraints: range: 10-10	.1.3.6.1.4.1.2272.1.73.1.1.2.1.7
rcVrrpOperIpAddrCount The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.	Integer32	.1.3.6.1.4.1.2272.1.73.1.1.2.1.8
rcVrrpOperMasterIpAddr The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router	SNMPv2-SMIIpAddress Constraints: range: 100-100	.1.3.6.1.4.1.2272.1.73.1.1.2.1.9
rcVrrpOperAuthType Authentication type used for VRRP protocol exchanges between virtual routers.	Enumerationr/w Constraints: range: 100-100	.1.3.6.1.4.1.2272.1.73.1.1.2.1.10
rcVrrpOperAuthKey The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, r…	OctetStringr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.11
rcVrrpOperHMACMD5Key The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When…	OctetStringr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.12
rcVrrpOperAdvertisementInterval This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.	Integer32r/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.13
rcVrrpOperPreemptMode Controls whether a higher priority virtual router will preempt a lower priority master.	Enumerationr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.14
rcVrrpOperVirtualRouterUpTime This is the time interval (in hundredths of a second) since this virtual router was initialized.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.2.1.15
rcVrrpOperRowStatus The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling the VRRP protocol for this virtual router. The information re…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.73.1.1.2.1.16
rcVrrpOperCriticalIpAddr IP address of the interface that will cause a shutdown event.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.73.1.1.2.1.17
rcVrrpOperHoldDownTimer Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master.	Integer32r/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.18
rcVrrpOperHoldDownState Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise.	Enumeration	.1.3.6.1.4.1.2272.1.73.1.1.2.1.19
rcVrrpOperHoldDownTimeRemaining Used to indicate the amount of time (in seconds) left before the rcVrrpOperHoldDownTimer will expire.	Integer32	.1.3.6.1.4.1.2272.1.73.1.1.2.1.20
rcVrrpOperAction Used to trigger an action on this vrrp interface.	Enumerationr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.21
rcVrrpOperCriticalIpAddrEnable Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does not exist.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.73.1.1.2.1.22
rcVrrpOperBackUpMaster Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT.	Enumerationr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.23
rcVrrpOperBackUpMasterState Indicate whether backup VRRP switch traffic forwarding is enabled or not.	Enumeration	.1.3.6.1.4.1.2272.1.73.1.1.2.1.24
rcVrrpOperFasterAdvInterval This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of th…	Integer32r/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.25
rcVrrpOperFasterAdvIntervalEnable Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval.	Enumerationr/w	.1.3.6.1.4.1.2272.1.73.1.1.2.1.26

rcVrrpRouterStatsTable

table

.1.3.6.1.4.1.2272.1.73.1.1.3 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpRouterStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpRouterStatsTable'

Copy

Table of virtual router statistics.

rcVrrpRouterStatsEntry row .1.3.6.1.4.1.2272.1.73.1.1.3.1

An entry in the table, containing statistics information
about a given virtual router.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpStatsIfIndex port interface index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.73.1.1.3.1.1
rcVrrpStatsVrId This object contains the Virtual Router Identifier (VRID).	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.73.1.1.3.1.2
rcVrrpStatsBecomeMaster The total number of times that this virtual router's state has transitioned from BACKUP to MASTER.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.3
rcVrrpStatsAdvertiseRcvd The total number of VRRP advertisements received by this virtual router.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.4
rcVrrpStatsAdvertiseIntervalErrors The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.5
rcVrrpStatsPasswdSecurityViolations The total number of VRRP packets received that do not pass the simple text password authentification check.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.6
rcVrrpStatsHmacSecurityViolations The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.7
rcVrrpStatsIpTtlErrors The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.8
rcVrrpStatsPriorityZeroPktsRcvd The total number of VRRP packets received by the virtual router with a priority of '0'.	SNMPv2-SMICounter32 Constraints: range: 50-50	.1.3.6.1.4.1.2272.1.73.1.1.3.1.9
rcVrrpStatsPriorityZeroPktsSent The total number of VRRP packets sent by the virtual router with a priority of '0'.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.10
rcVrrpStatsInvalidTypePktsRcvd The number of VRRP packets received by the virtual router with an invalid value in the 'type' field.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.11
rcVrrpStatsAddressListErrors Packets received address list the address list does not match the locally configured list for the virtual router.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.12
rcVrrpStatsUnknownAuthType Packets received with an unknown authentication type.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.13
rcVrrpStatsAuthTypeErrors Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType').	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.73.1.1.3.1.14

rcMplsIpStaticFecTable

table

.1.3.6.1.4.1.2272.1.74.1.1.1.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsIpStaticFecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsIpStaticFecTable'

Copy

This is the table of ip-static fec mappings for both
RSVP and LDP .

rcMplsIpStaticFecEntry row .1.3.6.1.4.1.2272.1.74.1.1.1.2.1

A static fec mapping to an rsvp lsp or ldp egress IP address.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsIpStaticFecDest The statically-configured destination IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1
rcMplsIpStaticFecMask The statically-configured destination IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2
rcMplsIpStaticFecTunnelName The rsvp lsp tunnel name associated with rcMplsIpStaticFecTunnelId. This field will be null if the value of rcMplsIpStaticFecTunnelId is 0.	OctetStringr/w	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3
rcMplsIpStaticFecTunnelId The rsvp lsp tunnel index (from mplsTunnelTable defined in rfc3812) if this is an rsvp Ip statically mapped address. This field will be 0 if this is an LDP Egress Address mapping.	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4
rcMplsIpStaticFecEgressAddr The LDP Egress IP Address. This field will be 0 if this is an rsvp tunnel fec mapping.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5
rcMplsIpStaticFecEgressMask The LDP Egress IP Mask. This field will be 0 if this is an rsvp tunnel fec mapping.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6
rcMplsIpStaticFecState Indicates the actual operational status of this static fec.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7
rcMplsIpStaticFecRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8

rcMplsIpFtnTable

table

.1.3.6.1.4.1.2272.1.74.1.1.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsIpFtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsIpFtnTable'

Copy

This is the table of mpls Ip FTN.

rcMplsIpFtnEntry row .1.3.6.1.4.1.2272.1.74.1.1.1.3.1

An mpls FTN entry .

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsIpFtnDest The FTN destination IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1
rcMplsIpFtnMask The FTN destination IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2
rcMplsIpFtnType The FTN next hop label type.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3
rcMplsIpFtnOutLabel The FTN outgoing label.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4
rcMplsIpFtnOutIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5
rcMplsIpFtnNextHop The FTN next hop Ip Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6

rcMplsIpIlmTable

table

.1.3.6.1.4.1.2272.1.74.1.1.1.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsIpIlmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsIpIlmTable'

Copy

This is the table of mpls Incoming Label Mapping.

rcMplsIpIlmEntry row .1.3.6.1.4.1.2272.1.74.1.1.1.4.1

An mpls Incoming Label Map entry .

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsIpIlmInLabel The Incoming Label.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1
rcMplsIpIlmInIfIndex The index value which uniquely identifies the incoming interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of …	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2
rcMplsIpIlmOutLabel The Outgoing Label.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3
rcMplsIpIlmOutIfIndex The index value which uniquely identifies the outgoing interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of …	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4
rcMplsIpIlmNextHop The next hop Ip Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5

rcMplsIngressLspStatTable

table

.1.3.6.1.4.1.2272.1.74.1.1.1.5 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsIngressLspStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsIngressLspStatTable'

Copy

This is the table of mpls Incoming Label Stats.

rcMplsIngressLspStatEntry row .1.3.6.1.4.1.2272.1.74.1.1.1.5.1

An mpls Incoming Label Stat entry .

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsIngressLspPort The incoming port for the lsp.	Integer32	.1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1
rcMplsIngressLspLabel The Incoming Lsp Label.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2
rcMplsIngressLspPkts Count of incoming packets for the corresponding lsp and port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3

rcMplsEgressLspStatTable

table

.1.3.6.1.4.1.2272.1.74.1.1.1.6 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsEgressLspStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsEgressLspStatTable'

Copy

This is the table of mpls OutGoing Label Stats.

rcMplsEgressLspStatEntry row .1.3.6.1.4.1.2272.1.74.1.1.1.6.1

An mpls OutGoing Label Stat entry .

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsEgressLspPort The OutGoing port for the lsp.	Integer32	.1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1
rcMplsEgressLspLabel The OutGoing Lsp Label.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2
rcMplsEgressLspPkts Count of outgoing packets for the corresponding lsp and port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3

rcMplsRsvpTunnelExtTable

table

.1.3.6.1.4.1.2272.1.74.1.1.2.2 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsRsvpTunnelExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsRsvpTunnelExtTable'

Copy

This is the table of mpls rsvp tunnels.  This table 
supplements the mplsTunnelTable from rfc3812.

rcMplsRsvpTunnelExtEntry row .1.3.6.1.4.1.2272.1.74.1.1.2.2.1

An entry in the mpls tunnel table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsRsvpTunnelExtIndex The Tunnel Index. The value of this object should mimic the value of mplsTunnelIndex of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1
rcMplsRsvpTunnelExtInstance The Tunnel Instance. The value of this object should mimic the value of mplsTunnelInstance of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies.	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2
rcMplsRsvpTunnelExtIngressLSRId The Rsvp Tunnel Ingress LSR Id. The value of this object should mimic the value of the mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies.	MPLS-TC-STD-MIBMplsExtendedTunnelId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3
rcMplsRsvpTunnelExtEgressLSRId The Rsvp Tunnel Egress LSR Id. The value of this object should mimic the value of the mplsTunnelEgressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies.	MPLS-TC-STD-MIBMplsExtendedTunnelId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4
rcMplsRsvpTunnelExtName The Name of the tunnel associated with this LSP.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5
rcMplsRsvpTunnelExtSwitchover Switch this LSP from active status to inactive status or vice versa.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6
rcMplsRsvpTunnelExtActiveStatus This is 'true' if this is the active LSP of the tunnel.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7
rcMplsRsvpTunnelExtResStyle This is the reservation style of the tunnel.	OctetString	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8
rcMplsRsvpTunnelExtLspId This is the LSP Id of this LSP.	MPLS-TC-STD-MIBMplsLSPID Type Constraints: range: 2 range: 6	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9
rcMplsRsvpTunnelExtERO This is the Explicit Route associated with this LSP.	OctetString	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10
rcMplsRsvpTunnelExtRRO This is the Recorded Route associated with this LSP.	OctetString Enumerated Values: 0 none 1 host 2 prefix 3 vc 4 vcgenid	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11
rcMplsRsvpTunnelExtInIfIndex This is the incoming interface for the LSP. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12
rcMplsRsvpTunnelExtInLabel This is the incoming Mpls Label. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13
rcMplsRsvpTunnelExtInNeighbor This address of the previous-hop (upstream) router. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14
rcMplsRsvpTunnelExtOutIfIndex This is the outgoing interface for the LSP. This applies to rows with mplsTunnelRole set to head(1) or transit(2).	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15
rcMplsRsvpTunnelExtOutLabel This is the outgoing Mpls Label. This applies to rows with mplsTunnelRole set to head(1) or transit(2).	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16
rcMplsRsvpTunnelExtOutNeighbor This address of the next-hop (downstream) router. This applies to rows with applies to rows with mplsTunnelRole set to head(1) or transit(2).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17
rcMplsRsvpTunnelExtTSpecRate This is the primary LSP TSpec Rate. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIUnsigned32 Enumerated Values: 0 none 1 host 2 prefix 3 vc 4 vcgenid Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18
rcMplsRsvpTunnelExtTSpecSize This is the primary LSP TSpec Size. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19
rcMplsRsvpTunnelExtTSpecPeak This is the primary LSP TSpec Peak. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20
rcMplsRsvpTunnelExtTSpecMin This is the primary LSP TSpec Min. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21
rcMplsRsvpTunnelExtTSpecMax This is the primary lsp TSpec Max. This applies to rows with mplsTunnelRole set to transit(2) or tail(3).	SNMPv2-SMIUnsigned32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22
rcMplsRsvpTunnelExtInstanceUpTime This is the time (in 100ths of a second) that this instance has been in the Oper 'Up' state. When the instance transitions out of the Oper 'Up' state the time is reset to zero.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23
rcMplsRsvpTunnelExtLSPUpTime This is the time (in 100ths of a second) that all instances of this LSP have been in the Oper Up state. The time is calculated based on the create time of the first instance of the LSP to go to the Oper 'Up' state. W…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24

rcMplsRsvpNeighborTable

table

.1.3.6.1.4.1.2272.1.74.1.1.2.3 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsRsvpNeighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsRsvpNeighborTable'

Copy

This is the table of mpls rsvp neighbors.

rcMplsRsvpNeighborEntry row .1.3.6.1.4.1.2272.1.74.1.1.2.3.1

An entry in the mpls rsvp tunnel table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsRsvpNeighborAddress This is the address of a learned neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1
rcMplsRsvpNeighborHelloState This is the state of hello exchange with the neighbor.	OctetString Enumerated Values: 0 none 1 host 2 prefix 3 vc 4 vcgenid	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2
rcMplsRsvpNeighborIfIndex This is the interface index of the neighbor.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3
rcMplsRsvpNeighborTime This is the time the neighbor was learned.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4
rcMplsRsvpNeighborPeriod This is the RSVP Hello Interval.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5
rcMplsRsvpNeighborSendCnt This is the number of Hello packets sent to the neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6
rcMplsRsvpNeighborRcvCnt This is the number of Hellp packets received from the neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7
rcMplsRsvpNeighborLocalInstance This is the identification sent to the remote router during Hello message exchange.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8
rcMplsRsvpNeighborRemoteInstance This is the identification provided by the remote router during Hello message exchange.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9
rcMplsRsvpNeighborCreationTime This is the time the neighbor instance was created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10
rcMplsRsvpNeighborLastPktRxTime This is the time that the last Hello message was received from the remote router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11
rcMplsRsvpNeighborRefReduction This is the refresh-reduction status between the local router and the neighbor.	OctetString	.1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12

rcMplsRsvpInterfaceTable

table

.1.3.6.1.4.1.2272.1.74.1.1.2.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsRsvpInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsRsvpInterfaceTable'

Copy

This is the table of mpls rsvp interfaces.

rcMplsRsvpInterfaceEntry row .1.3.6.1.4.1.2272.1.74.1.1.2.4.1

An entry in the mpls rsvp interface table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsRsvpInterfaceIfIndex This is the interface index.	InterfaceIndex Enumerated Values: 1 nonexistent 2 initialized 3 openrec 4 opensent 5 operational Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1
rcMplsRsvpInterfaceAddress This is the address of the interface.	SNMPv2-SMIIpAddress Enumerated Values: 1 unknown 2 active 3 passive Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2
rcMplsRsvpInterfaceRefreshInterval This is the RSVP refresh interval for the interface(seconds).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3
rcMplsRsvpInterfaceRefreshMult This is the configured RSVP refresh multiplier for the interface(seconds).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4
rcMplsRsvpInterfaceHelloInterval This is the configured RSVP Hello Interval of the interface (seconds).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5
rcMplsRsvpInterfaceRefreshReduction This is the configured RSVP refresh reduction support on the interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6
rcMplsRsvpInterfaceMessageBundling This indicates state of message bundling on the interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7

rcMplsRsvpStatsTable

table

.1.3.6.1.4.1.2272.1.74.1.1.2.5 · 1 row entry · 31 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsRsvpStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsRsvpStatsTable'

Copy

This is the table of mpls rsvp statistics.

rcMplsRsvpStatsEntry row .1.3.6.1.4.1.2272.1.74.1.1.2.5.1

An entry in the mpls rsvp statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsRsvpStatsIfIndex This is the interface index. This value can be 0 or a valid interface index. When 0 the global rsvp statistics are retrieved.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1
rcMplsRsvpStatsPathRcv This is the path received count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2
rcMplsRsvpStatsPathSent This is the path sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3
rcMplsRsvpStatsPathErrRcv This is the path error receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4
rcMplsRsvpStatsPathErrSent This is the path error sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5
rcMplsRsvpStatsPathTearRcv This is the path tear receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6
rcMplsRsvpStatsPathTearSent This is the path tear sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7
rcMplsRsvpStatsResvRcv This is the reservation received count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8
rcMplsRsvpStatsResvSent This is the reservation sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9
rcMplsRsvpStatsResvErrRcv This is the reservation error receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10
rcMplsRsvpStatsResvErrSent This is the reservation error sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11
rcMplsRsvpStatsResvTearRcv This is the resv tear receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12
rcMplsRsvpStatsResvTearSent This is the resv tear sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13
rcMplsRsvpStatsConfTearRcv This is the conf tear receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14
rcMplsRsvpStatsConfTearSent This is the conf tear sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15
rcMplsRsvpStatsAckRcv This is the acks receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16
rcMplsRsvpStatsAckSent This is the acks sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17
rcMplsRsvpStatsSRefreshRcv This is the summary refresh receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18
rcMplsRsvpStatsSRefreshSent This is the summary refresh sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19
rcMplsRsvpStatsHelloReqRcv This is the hello request receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20
rcMplsRsvpStatsHelloReqSent This is the hello request sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21
rcMplsRsvpStatsHelloAckRcv This is the hello ack receives count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22
rcMplsRsvpStatsHelloAckSent This is the hello ack sent count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23
rcMplsRsvpStatsBadIpHdr This is the count of pkts with bad IP Header.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24
rcMplsRsvpStatsBadVersion This is the count of pkts with Bad Version.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25
rcMplsRsvpStatsBadRsvpLen This is the count of pkts with Bad Rsvp length.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26
rcMplsRsvpStatsBadCksum This is the count of pkts with Bad Checksum.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27
rcMplsRsvpStatsBadMsgType This is the count of pkts with Bad Message type.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28
rcMplsRsvpStatsBadMsgForm This is the count of pkts with Bad Message Form.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29
rcMplsRsvpStatsBadIntf This is the count of pkts received on a Bad Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30
rcMplsRsvpStatsClear Clear RSVP Statistics for the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.74.1.1.2.5.1.31

rcMplsLdpDiscoveryTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpDiscoveryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpDiscoveryTable'

Copy

This is the table of mpls ldp discoveries.

rcMplsLdpDiscoveryEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.2.1

An entry in the mpls ldp discovery table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpDiscoveryIfIndex This is the interface index.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1
rcMplsLdpDiscoveryPeerLdpId This is the peer ldp id.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2
rcMplsLdpDiscoveryPeerTransportAddr This is the peer transport address to which an LDP session has been provisioned.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3
rcMplsLdpDiscoveryNegotiatedHoldTime This is the hold time negotiated between peers.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4
rcMplsLdpDiscoveryConfSeqNum This is the configured sequence number sent by the peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5
rcMplsLdpDiscoveryExtendedDiscovery If set to 1, extended discovery is enabled. If set to 0, basic discovery is enabled.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6

rcMplsLdpPathTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpPathTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpPathTable'

Copy

This is the table of mpls LDP Paths between
a local peer and a remote peer .

rcMplsLdpPathEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.3.1

An entry in the mpls ldp path table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpPathType This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1
rcMplsLdpPathAddrType This is the path address type.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2
rcMplsLdpPathAddrPrefixLength This is the path address prefix length.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3
rcMplsLdpPathAddr This is the path address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4
rcMplsLdpPathInLabel This is the path address prefix length.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5

rcMplsLdpPathRemotePeerTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.4 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpPathRemotePeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpPathRemotePeerTable'

Copy

This is the table of LDP paths to a given
remote peer.

rcMplsLdpPathRemotePeerEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.4.1

An entry in the mpls ldp path remote
peer table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpPathRemotePeerType This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1
rcMplsLdpPathRemotePeerAddrType This is the type of the path address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2
rcMplsLdpPathRemotePeerAddrPrefixLength This is the path address prefix length.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3
rcMplsLdpPathRemotePeerAddr This is the path address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4
rcMplsLdpPathRemotePeerId This is the Id of the remote peer of the path.	Integer32	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5
rcMplsLdpPathRemotePeerLdpId This is the LDP Id of the remote peer of the path.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6
rcMplsLdpPathRemotePeerOutLabel This is the Out Label for this instance of the Remote Peer Id.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7
rcMplsLdpPathRemotePeerState This is the state of the remote peer.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8

rcMplsLdpRouteTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpRouteTable'

Copy

This is the table of mpls ldp routes.

rcMplsLdpRouteEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.5.1

An entry in the mpls ldp route table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpRouteType This is the route type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1
rcMplsLdpRouteAddrType This is the route address prefix length.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2
rcMplsLdpRouteAddrPrefixLength This is the route address prefix length.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3
rcMplsLdpRouteAddr This is the route address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4
rcMplsLdpRouteIfIndex This is the interface index of the route entry.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5
rcMplsLdpRouteNextHopAddrType This is the address type of the next hop.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6
rcMplsLdpRouteNextHopAddr This is the address of the next hop.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7

rcMplsLdpSessionTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.6 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpSessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpSessionTable'

Copy

This is the table of mpls ldp sessions.

rcMplsLdpSessionEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.6.1

An entry in the mpls ldp session table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpSessionEntityLdpId This is the entity LDP ID for the session.	MPLS-TC-STD-MIBMplsLdpIdentifier Constraints: range: 0-40	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1
rcMplsLdpSessionEntityIndex This is the entity LDP ID for the session.	DIFFSERV-MIBIndexInteger Enumerated Values: 1 notApplicable 2 required 3 inProgress 4 complete Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2
rcMplsLdpSessionPeerLdpId This is the peer LDP ID for the session.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3
rcMplsLdpSessionStateLastChange The time this Session entered its current state as denoted by the rcMplsLdpSessionState object.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4
rcMplsLdpSessionState The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior 1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational.	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5
rcMplsLdpSessionRole During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/LER was behaving in an active role or passive role during t…	Enumeration	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6
rcMplsLdpSessionProtocolVersion This is the protocol version.	SNMPv2-SMIUnsigned32 Constraints: range: -1-65535	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7
rcMplsLdpSessionKeepAliveHoldTimeRem This is the session keep alive hold time remaining.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8
rcMplsLdpSessionKeepAliveTime This is the session keep alive time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9
rcMplsLdpSessionMaxPduLength This is the session's max pdu length.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10
rcMplsLdpSessionDiscontinuityTime This is the session's discontinuity time.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11
rcMplsLdpSessionHoldTime This is the session's hold time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12
rcMplsLdpSessionUpTime This is the session's up time.	SNMPv2-SMIInteger32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13
rcMplsLdpSessionMessagesSent This is the session total messages sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14
rcMplsLdpSessionMessagesRecv This is the session total messages received.	SNMPv2-SMICounter32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15

rcMplsLdpInterfaceTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.7 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpInterfaceTable'

Copy

This is the table of mpls ldp interface.

rcMplsLdpInterfaceEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.7.1

An entry in the mpls ldp interface table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpInterfaceIfIndex This is the LDP interface if index.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1
rcMplsLdpInterfaceNbrCount This is the number of neighbors.	SNMPv2-SMIUnsigned32 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2
rcMplsLdpInterfaceNextHello This is the next hello time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3
rcMplsLdpInterfaceConfHoldTime This is the configured hello hold time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4
rcMplsLdpInterfaceNegHoldTime This is the negotiated hello hold time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5
rcMplsLdpInterfaceHelloInterval This is one third of the negotiated hello hold time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6

rcMplsLdpStatsTable

table

.1.3.6.1.4.1.2272.1.74.1.1.3.8 · 1 row entry · 41 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMplsLdpStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMplsLdpStatsTable'

Copy

This is the table of mpls ldp statistics.

rcMplsLdpStatsEntry row .1.3.6.1.4.1.2272.1.74.1.1.3.8.1

An entry in the mpls ldp statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
rcMplsLdpStatsPeerAddress This is the LDP Peer Address key for search. This value can be a valid peer address or 0.0.0.0. If 0.0.0.0 then global LDP statistics are retrieved.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1
rcMplsLdpStatsNotifyRecv This is the count of notifications received.	SNMPv2-SMICounter32 Enumerated Values: 1 configured 2 operational Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2
rcMplsLdpStatsNotifySent This is the count of notifications sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3
rcMplsLdpStatsHelloRecv This is the count of hellos received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4
rcMplsLdpStatsHelloSent This is the count of hellos sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5
rcMplsLdpStatsInitRecv This is the count of initializations received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6
rcMplsLdpStatsInitSent This is the count of initializations sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7
rcMplsLdpStatsKeepRecv This is the count of keep alives received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8
rcMplsLdpStatsKeepSent This is the count of keep alives sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9
rcMplsLdpStatsAddrRecv This is the count of addrs received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10
rcMplsLdpStatsAddrSent This is the count of addrs sent.	SNMPv2-SMICounter32 Enumerated Values: 1 local 2 foreign Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11
rcMplsLdpStatsAddrWdrRecv This is the count of addr withdraws received.	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12
rcMplsLdpStatsAddrWdrSent This is the count of addr withdraws sent.	SNMPv2-SMICounter32 Enumerated Values: 1 rip 2 ospf 3 static 4 bgp Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13
rcMplsLdpStatsLabelMapRecv This is the count of label maps received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14
rcMplsLdpStatsLabelMapSent This is the count of label maps sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15
rcMplsLdpStatsLabelReqRecv This is the count of label reqs received.	SNMPv2-SMICounter32 Enumerated Values: 1 local 2 foreign Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16
rcMplsLdpStatsLabelReqSent This is the count of label reqs sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17
rcMplsLdpStatsLabelWdrRecv This is the count of label withdraws received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18
rcMplsLdpStatsLabelWdrSent This is the count of label withdraws sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19
rcMplsLdpStatsLabelRelRecv This is the count of label withdraws received.	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20
rcMplsLdpStatsLabelRelSent This is the count of label withdraws sent.	SNMPv2-SMICounter32 Enumerated Values: 1 rip 2 ospf 3 static 4 bgp 5 isis 6 none Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21
rcMplsLdpStatsLabelAbrRecv This is the count of label aborts received.	SNMPv2-SMICounter32 Constraints: range: -1-65535	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22
rcMplsLdpStatsLabelAbrSent This is the count of label aborts sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23
rcMplsLdpStatsSessionUp This is the count of session up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24
rcMplsLdpStatsSessionDown This is the count of session down.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25
rcMplsLdpStatsBadLdpIdentifierErrors This is the count of bad LDP ID errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26
rcMplsLdpStatsBadPduLengthErrors This is the count of Bad PDU length errors.	SNMPv2-SMICounter32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27
rcMplsLdpStatsBadMessageLengthErrors This is the count of bad message length errors.	SNMPv2-SMICounter32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28
rcMplsLdpStatsUnknownMessageErrors This is the count of unknown message errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29
rcMplsLdpStatsUnknownTlvErrors This is the count of unknown TLV errors.	SNMPv2-SMICounter32 Enumerated Values: 1 adminDown 2 down 3 init 4 up Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30
rcMplsLdpStatsBadTlvLengthErrors This is the count of bad TLV Length errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31
rcMplsLdpStatsMalformedTlvValueErrors This is the count of Malinformed TLV value errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32
rcMplsLdpStatsHoldTimerExpErrors This is the count of hold time expired errors.	SNMPv2-SMICounter32 Enumerated Values: 1 asyncModeWEchoFun 2 asynchModeWOEchoFun 3 demandModeWEchoFunction 4 demandModeWOEchoFunction Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33
rcMplsLdpStatsSessionRejectedNoHelloErrors This is the count of session reject - no hello errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34
rcMplsLdpStatsSessionRejectedBadParmAdvErrors This is the count of session reject - bad parameter advertisement errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35
rcMplsLdpStatsSessionRejectedMaxPduErrors This is the count of session reject - Max PDU Errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36
rcMplsLdpStatsSessionRejectedBadLabelRangeErrors This is the count of session reject - Bad Label Range errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37
rcMplsLdpStatsSessionRejectedSetupAbortErrors This is the count of session reject - Setup Abort errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38
rcMplsLdpStatsSessionRejectedBadKeepaliveErrors This is the count of session reject - Bad Keepalive Errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39
rcMplsLdpStatsSessionOtherErrors This is the count of other errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40
rcMplsLdpStatsClear Clear LDP Statistics for the Peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.74.1.1.3.8.1.41

rcIpMRouteStatsTable

table

.1.3.6.1.4.1.2272.1.76.1.6 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpMRouteStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpMRouteStatsTable'

Copy

the table containing IP Multicast statistics.

rcIpMRouteStatsEntry row .1.3.6.1.4.1.2272.1.76.1.6.1

An entry containing the ip multicast statistics
information for the specific group ip address.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpMRouteStatsGroupAddress the IP multicast group address for which this entry contains ip multicast statistics.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.76.1.6.1.1
rcIpMRouteStatsSourceCount The number of sources corresponding to the specific group and vrf.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.76.1.6.1.2
rcIpMRouteStatsPkts The total number of frames that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Enumerated Values: 1 simplePassword 2 keyedMD5 3 meticulousKeyedMD5 4 keyedSHA1 5 meticulousKeyedSHA1 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.76.1.6.1.3
rcIpMRouteStatsBytes The total number of bytes that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.76.1.6.1.4
rcIpMRouteStatsAverageSizePerPkt The average length of packets that are processed corresponding to the specific group and vrf.	SNMPv2-SMIInteger32 Enumerated Values: 1 adminDown 2 down 3 init 4 up Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.76.1.6.1.5
rcIpMRouteStatsDropPkts The total number of drop frames that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.76.1.6.1.6
rcIpMRouteStatsDropBytes The total number of drop bytes that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.76.1.6.1.7
rcIpMRouteStatsPktsPerSecond The number of packets that are processed corresponding to the specific group and vrf in one second.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.76.1.6.1.8

rcCsuInfoTable

table

.1.3.6.1.4.1.2272.1.77.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCsuInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCsuInfoTable'

Copy

Table of CSU Info Entries.

rcCsuInfoEntry row .1.3.6.1.4.1.2272.1.77.2.1

CSU Info Table Entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcCsuInfoSlotNumber Value of the slot number.	Integer32	.1.3.6.1.4.1.2272.1.77.2.1.1
rcCsuInfoTypeOfCard Integer holding the card type.	Enumeration	.1.3.6.1.4.1.2272.1.77.2.1.2
rcCsuInfoTypeOfCardDesc The type of card present in the current slot.	OctetString	.1.3.6.1.4.1.2272.1.77.2.1.3
rcCsuInfoUpgradeStatus The Upgrade Status of the card.	Enumeration	.1.3.6.1.4.1.2272.1.77.2.1.4
rcCsuInfoUpgradeStartTime Timestamp of the upgrade start time.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.77.2.1.5
rcCsuInfoUpgradeEndTime Timestamp of the upgrade end time.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.77.2.1.6

rcMsdpPeerTable

table

.1.3.6.1.4.1.2272.1.80.1.1.2 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMsdpPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMsdpPeerTable'

Copy

A table that augments the management information in the
standard IETF msdpPeerTable.

rcMsdpPeerEntry row .1.3.6.1.4.1.2272.1.80.1.1.2.1

A set of additional management information augmenting that of
the standard IETF msdpPeerEntry.

Indexes

rcBfdTmpSessApplicationId rcBfdTmpSessDiscriminator rcBfdTmpSessAddrType rcBfdTmpSessAddr

Column	Syntax	OID
rcMsdpPeerAsNumberdeprecated The AS number of the remote Peer. Value -1 indicates that AS number is not configured. This is deprecated by rcMsdpPeer4ByteAsNumber.	Integer32r/w	.1.3.6.1.4.1.2272.1.80.1.1.2.1.1
rcMsdpPeerTooShortMessages The number of Short messages received from this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.2
rcMsdpPeerInBadMessages The number of Bad MSDP messages received from this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.3
rcMsdpPeerInKeepAliveMessages The number of keep alive messages received from this peer.	SNMPv2-SMICounter32 Enumerated Values: 1 adminDown 2 down 3 init 4 up Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.4
rcMsdpPeerOutKeepAliveMessages The number of keep alive messages transmitted to this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.5
rcMsdpPeerInSAFilterEnabled To enable or disable the in SA filter of a peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.6
rcMsdpPeerInSAFilterRouteMapName The route Map name of IN SA Filter. If route map name is configured, it Accepts only the SA messages that meet the match criteria in the route map map-name with a permit keyword. If access route map name is not configur…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.80.1.1.2.1.7
rcMsdpPeerOutSAFilterEnabled To enable or disable the out SA filter of a peer.	SNMPv2-TCTruthValuer/w Constraints: range: 0-64 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.8
rcMsdpPeerOutSAFilterRouteMapName The route Map name of OUT SA Filter. If route map name is configured, it sends only the SA messages that meet the match criteria in the route map map-name with a permit keyword. If access route map name is not configure…	OctetStringr/w	.1.3.6.1.4.1.2272.1.80.1.1.2.1.9
rcMsdpPeerDescription Peer specific description. It is used to make the peer easier to be identified.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.80.1.1.2.1.10
rcMsdpPeerSALimit The SA Cache limit for this peer.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.80.1.1.2.1.11
rcMsdpPeerMd5AuthEnabled The MD5 Authentication status of this peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.12
rcMsdpPeerMd5AuthPassword The MD5 Authentication password of this peer.	OctetStringr/w	.1.3.6.1.4.1.2272.1.80.1.1.2.1.13
rcMsdpPeerSAsLearnedFromThisPeer The total number of SAs learned from this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.14
rcMsdpPeerSAsAdvertisedToThisPeer The total number of SAs advertised to this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.15
rcMsdpPeerUpOrDownTime MSDP Peer Up or Down duration.	SNMPv2-SMITimeTicks Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.80.1.1.2.1.16
rcMsdpPeerConnAndStatsClearedTime The duration of connection and statistics cleared ago.	SNMPv2-SMITimeTicks Enumerated Values: 1 unknown 2 up 3 down Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.80.1.1.2.1.17
rcMsdpPeerRouteMapName Route map name for default peer.	OctetStringr/w Enumerated Values: 1 unknown 2 up 3 down	.1.3.6.1.4.1.2272.1.80.1.1.2.1.18
rcMsdpPeerAdminEnabled The admin status of this peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.19
rcMsdpPeerOperEnabled The operational status of this peer.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.20
rcMsdpPeerDefaultPeerState The default peer has two state: Configured and Operational. MSDP node only accept SA messages from the Operational default peer. These is only one default peer can become Operational, all the Configured default peers a…	Enumeration	.1.3.6.1.4.1.2272.1.80.1.1.2.1.21
rcMsdpPeerDefaultPeer It is used to indicate whether a peer is a default peer or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.22
rcMsdpPeerClearPeer It is an operational object. It is used to determine whether the TCP connection for the specified peer will be cleared or not. The returned value will be always `false` for query.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.80.1.1.2.1.23
rcMsdpPeer4ByteAsNumber The AS number of the remote Peer. The value of the default AS number is 0. This object replaces rcMsdpPeerAsNumber.	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w	.1.3.6.1.4.1.2272.1.80.1.1.2.1.24

rcMsdpSACacheTable

table

.1.3.6.1.4.1.2272.1.80.1.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMsdpSACacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMsdpSACacheTable'

Copy

SA (Source Active) - Cache Table. This table contains
foreign as well as local SA Cache entries.  Foreign SA Cache
entries from this table will have corresponding entries in 
the standard table msdpSACacheTable

rcMsdpSACacheEntry row .1.3.6.1.4.1.2272.1.80.1.1.3.1

SA Cache Entry.

Indexes

rcKhiChassisFanOperHistoryFanId rcKhiChassisFanOperHistoryIndex

Column	Syntax	OID
rcMsdpSACacheGroupAddr The group address of the SA Cache entry.	SNMPv2-SMIIpAddress Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.80.1.1.3.1.1
rcMsdpSACacheSourceAddr The source address of the SA Cache entry.	SNMPv2-SMIIpAddress Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.80.1.1.3.1.2
rcMsdpSACacheOriginRP The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.80.1.1.3.1.3
rcMsdpSACacheTypeInformation This object describes the SA cache type. It can be either local cache or foreign cache.	Enumeration	.1.3.6.1.4.1.2272.1.80.1.1.3.1.4
rcMsdpSACacheOriginatorAsNumber The AS number of the originator.	Unsigned32	.1.3.6.1.4.1.2272.1.80.1.1.3.1.5
rcMsdpSACacheRouteType The owner of the route that is used for rpf checking.	Enumeration	.1.3.6.1.4.1.2272.1.80.1.1.3.1.6

rcMsdpSACacheRecordsTable

table

.1.3.6.1.4.1.2272.1.80.1.1.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMsdpSACacheRecordsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMsdpSACacheRecordsTable'

Copy

SA (Source Active) - Cache Records Table. This table contains
foreign as well as local SA Cache entries.  Foreign SA Cache
entries from this table will have corresponding entries in
the standard table msdpSACacheTable

rcMsdpSACacheRecordsEntry row .1.3.6.1.4.1.2272.1.80.1.1.4.1

SA Cache Entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcMsdpSACacheRecordsTypeInformation This object describes the SA cache type. It can be either local cache or foreign cache.	Enumeration	.1.3.6.1.4.1.2272.1.80.1.1.4.1.1
rcMsdpSACacheRecordsGroupAddr The group address of the SA Cache entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.80.1.1.4.1.2
rcMsdpSACacheRecordsSourceAddr The source address of the SA Cache entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.80.1.1.4.1.3
rcMsdpSACacheRecordsOriginRP The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.80.1.1.4.1.4
rcMsdpSACacheRecordsOriginatorAsNumberobsolete The AS number of the originator. This attribute is obsoleted.	Unsigned32 Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.80.1.1.4.1.5
rcMsdpSACacheRecordsRouteType The owner of the route that is used for rpf checking.	Enumeration Enumerated Values: 1 unknown 2 empty 3 up 4 down	.1.3.6.1.4.1.2272.1.80.1.1.4.1.6
rcMsdpSACacheRecordsOriginatorAsNum The AS number of the originator. This object is used to obsolete rcMsdpSACacheRecordsOriginatorAsNumber. Value -1 indicates that AS number is not configured.	Integer32 Enumerated Values: 1 unknown 2 empty 3 up 4 down	.1.3.6.1.4.1.2272.1.80.1.1.4.1.7

rcBfdTmpSessTable

table

.1.3.6.1.4.1.2272.1.81.1.1.2 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBfdTmpSessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBfdTmpSessTable'

Copy

The BFD Session Table describes the BFD sessions.

rcBfdTmpSessEntry row .1.3.6.1.4.1.2272.1.81.1.1.2.1

The BFD Session Entry describes BFD session.

Indexes

No indexes recorded

Column	Syntax	OID
rcBfdTmpSessIndex This object contains an index used to represent a unique BFD session on this device.	RcBfdTmpSessIndexTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.2.1.1
rcBfdTmpSessApplicationId This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a subset of the total number of BFD sessions. This applicatio…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.2.1.2
rcBfdTmpSessDiscriminator This object specifies the local discriminator for this BFD session, used to uniquely identify it.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.81.1.1.2.1.3
rcBfdTmpSessRemoteDiscr This object specifies the session discriminator chosen by the remote system for this BFD session.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.81.1.1.2.1.4
rcBfdTmpSessUdpPort The UDP Port for BFD. The default value is the well-known value for this port.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.81.1.1.2.1.5
rcBfdTmpSessState The perceived state of the BFD session.	Enumeration	.1.3.6.1.4.1.2272.1.81.1.1.2.1.6
rcBfdTmpSessRemoteHeardFlag This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(0) if the…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.81.1.1.2.1.7
rcBfdTmpSessDiag A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.2.1.8
rcBfdTmpSessOperMode This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A value of DemandModeWEchoFunction(3) ... A value o…	Enumeration Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.81.1.1.2.1.9
rcBfdTmpSessDemandModeDesiredFlag This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not	SNMPv2-TCTruthValuer/w Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.81.1.1.2.1.10
rcBfdTmpSessEchoFuncModeDesiredFlag This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(0) if not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.81.1.1.2.1.11
rcBfdTmpSessControlPlanIndepFlag This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the co…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.81.1.1.2.1.12
rcBfdTmpSessAddrType This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only wh…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.81.1.1.2.1.13
rcBfdTmpSessAddr This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.81.1.1.2.1.14
rcBfdTmpSessDesiredMinTxInterval This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets.	RcBfdTmpIntervalr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.2.1.15
rcBfdTmpSessReqMinRxInterval This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting.	RcBfdTmpIntervalr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.2.1.16
rcBfdTmpSessReqMinEchoRxInterval This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting.	RcBfdTmpIntervalr/w Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.81.1.1.2.1.17
rcBfdTmpSessDetectMult This object specifies the Detect time multiplier.	SNMPv2-SMIUnsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.81.1.1.2.1.18
rcBfdTmpSessStorType This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.81.1.1.2.1.19
rcBfdTmpSessRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the bfdSessRowStatus and bfdSessStorag…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.81.1.1.2.1.20
rcBfdTmpSessAuthPresFlag This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.81.1.1.2.1.21
rcBfdTmpSessAuthenticationType The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set	Enumerationr/w	.1.3.6.1.4.1.2272.1.81.1.1.2.1.22
rcBfdTmpSessDestAddr This object specifies destination IP address of the interface associated with this BFD session.	INET-ADDRESS-MIBInetAddress Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.81.1.1.2.1.23
rcBfdTmpSessOldState The old state of the BFD session.	Enumeration	.1.3.6.1.4.1.2272.1.81.1.1.2.1.24

rcBfdTmpSessPerfTable

table

.1.3.6.1.4.1.2272.1.81.1.1.3 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBfdTmpSessPerfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBfdTmpSessPerfTable'

Copy

This table specifies BFD Session performance counters.

rcBfdTmpSessPerfEntry row .1.3.6.1.4.1.2272.1.81.1.1.3.1

An entry in this table is created by a BFD-enabled node for
every BFD Session. bfdCounterDiscontinuityTime is used to
indicate potential discontinuity for all counter objects
in this table.

Indexes

No indexes recorded

Column	Syntax	OID
rcBfdTmpSessPerfPktIn The total number of BFD messages received for this BFD session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.3.1.1
rcBfdTmpSessPerfPktOut The total number of BFD messages sent for this BFD session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.3.1.2
rcBfdTmpSessUpTime The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value.	SNMPv2-TCTimeStamp Constraints: range: 1-100 Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.81.1.1.3.1.3
rcBfdTmpSessPerfLastSessDownTime The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.81.1.1.3.1.4
rcBfdTmpSessPerfLastCommLostDiag The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value.	RcBfdTmpDiag Type Values: 1 noDiagnostic 2 controlDetectionTimeExpired 3 echoFunctionFailed 4 neighborSignaledSessionDown 5 forwardingPlaneReset 6 pathDown 7 concatenatedPathDown 8 administrativelyDown 9 reverseConcatenatedPathDown	.1.3.6.1.4.1.2272.1.81.1.1.3.1.5
rcBfdTmpSessPerfSessUpCount The number of times this session has gone into the Up state since the router last rebooted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.3.1.6
rcBfdTmpSessPerfDiscTime The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the specific instances associated with this BFD session of any Coun…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.81.1.1.3.1.7
rcBfdTmpSessPerfPktInHC This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spell…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.81.1.1.3.1.8
rcBfdTmpSessPerfPktOutHC This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktOutHC is supported accordin…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.81.1.1.3.1.9

rcBfdTmpSessMapTable

table

.1.3.6.1.4.1.2272.1.81.1.1.4 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBfdTmpSessMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBfdTmpSessMapTable'

Copy

The BFD Session Mapping Table maps the complex
indexing of the BFD sessions to the flat
BFDIndex used in the BfdSessionTable.
          
Implementors need to be aware that if the value of
the bfdSessAddr (an OID) has more
that 111 sub-identifiers, then OIDs of column
instances in this table will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3.

rcBfdTmpSessMapEntry row .1.3.6.1.4.1.2272.1.81.1.1.4.1

The BFD Session Entry describes BFD session
that is mapped to this index.

Implementors need to be aware that if the value of
the mplsInSegmentMapLabelPtrIndex (an OID) has more
that 111 sub-identifiers, the…

Indexes

No indexes recorded

Column	Syntax	OID
rcBfdTmpSessMapBfdIndex This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable.	RcBfdTmpSessIndexTC Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.81.1.1.4.1.1

rcBfdExtSessTable

table

.1.3.6.1.4.1.2272.1.81.2.1.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcBfdExtSessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcBfdExtSessTable'

Copy

The BFD Session Extension Table describes the BFD sessions.

rcBfdExtSessEntry row .1.3.6.1.4.1.2272.1.81.2.1.1.1

The BFD Session Extension Entry describes BFD session.

Indexes

No indexes recorded

Column	Syntax	OID
rcBfdExtSessPeerState The perceived peer state of the BFD session.	Enumeration	.1.3.6.1.4.1.2272.1.81.2.1.1.1.1
rcBfdExtSessPeerAddrType Inet Address Type of peer IP address associated with this BFD session.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.81.2.1.1.1.2
rcBfdExtSessPeerAddr This object specifies peer IP address associated with this BFD session.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.81.2.1.1.1.3
rcBfdExtSessApp This object specifies the applications configured on this BFD session.	OctetString	.1.3.6.1.4.1.2272.1.81.2.1.1.1.4
rcBfdExtSessAppRun This object specifies the applications running on this BFD session.	OctetString	.1.3.6.1.4.1.2272.1.81.2.1.1.1.5

rcKhiChassisHistoryTable

table

.1.3.6.1.4.1.2272.1.85.3.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisHistoryTable'

Copy

Chassis table include chassis history info

rcKhiChassisHistoryEntry row .1.3.6.1.4.1.2272.1.85.3.11.1

A chassis history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisHistoryIndex history index for chassis	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.85.3.11.1.1
rcKhiChassisHistoryTemperatureStateChange Chassis temperature state change. Green if temperature <=40, Yellow if temperature >=41 and <50 and Red if temperature >=50	KhiStatusValue Enumerated Values: 1 portUp 2 portDown 3 smltPortUp 4 smltPortDown 5 istPortUp 6 istPortDown 7 ucastPktTxRxRatioYellow 8 ucastPktTxRxRatioRed	.1.3.6.1.4.1.2272.1.85.3.11.1.2
rcKhiChassisHistoryTemperatureStateChangeTime Time at which the temperature state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.11.1.3

rcKhiChassisFanTable

table

.1.3.6.1.4.1.2272.1.85.3.12 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisFanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisFanTable'

Copy

Fan table include Fan statistics

rcKhiChassisFanEntry row .1.3.6.1.4.1.2272.1.85.3.12.1

A chassis fan table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisFanId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.12.1.1
rcKhiChassisFanOperState Fan operational state	Enumeration	.1.3.6.1.4.1.2272.1.85.3.12.1.2
rcKhiChassisFanFirstStateChange Fan operational state first change after boot or clear.	Enumeration	.1.3.6.1.4.1.2272.1.85.3.12.1.3
rcKhiChassisFanFirstStateChangeTime Time at which the fan operational state first change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.12.1.4
rcKhiChassisFanOperStatusIndication Fan oper state status indication	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.12.1.5
rcKhiChassisFanTemperature Fan 1 temperature	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.3.12.1.6
rcKhiChassisFanTempFirstHigherAlert Fan temperature first higher alert	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.3.12.1.7
rcKhiChassisFanTempFirstHigherAlertTime Time at which the fan temperature first higher alert occur	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.12.1.8
rcKhiChassisFanTempStatusIndication Fan status indication	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.12.1.9

rcKhiChassisFanOperHistoryTable

table

.1.3.6.1.4.1.2272.1.85.3.13 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisFanOperHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisFanOperHistoryTable'

Copy

Fan table include Fan operational state history info

rcKhiChassisFanOperHistoryEntry row .1.3.6.1.4.1.2272.1.85.3.13.1

A chassis fan oper state history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisFanOperHistoryFanId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.13.1.1
rcKhiChassisFanOperHistoryIndex history index for a particular fan	Integer32	.1.3.6.1.4.1.2272.1.85.3.13.1.2
rcKhiChassisFanOperHistoryStateChange Fan operational state change. Up - Green and Down - Red	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.13.1.3
rcKhiChassisFanOperHistoryStateChangeTime Time at which the fan operational state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.13.1.4

rcKhiChassisFanTempHistoryTable

table

.1.3.6.1.4.1.2272.1.85.3.14 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisFanTempHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisFanTempHistoryTable'

Copy

Fan table include Fan temperature history info

rcKhiChassisFanTempHistoryEntry row .1.3.6.1.4.1.2272.1.85.3.14.1

A chassis fan Temperature history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisFanTempHistoryFanId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.14.1.1
rcKhiChassisFanTempHistoryIndex history index for a particular fan	Integer32	.1.3.6.1.4.1.2272.1.85.3.14.1.2
rcKhiChassisFanTempHistoryTempStateChange Fan temperature state change. Green if temperature <=40, Yellow if temperature >=41 and <50 and Red if temperature >=50	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.14.1.3
rcKhiChassisFanTempHistoryTempStateChangeTime Time at which the fan temperature state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.14.1.4

rcKhiChassisPowerSupplyTable

table

.1.3.6.1.4.1.2272.1.85.3.15 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisPowerSupplyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisPowerSupplyTable'

Copy

Power Supply table include Power Supply statistics

rcKhiChassisPowerSupplyEntry row .1.3.6.1.4.1.2272.1.85.3.15.1

A chassis fan table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisPowerSupplyId An unique index used to identify a particular Power Supply in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.15.1.1
rcKhiChassisPowerSupplyOperState Power Supply operational state	Enumeration Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.85.3.15.1.2
rcKhiChassisPowerSupplyFirstStateChange Power Supply operational state First change after boot or clear.	Enumeration Enumerated Values: 0 singleCollisionErrors 1 multipleCollisionErrors 2 lateCollisionErrors 3 excessiveCollisionErrors 4 macRxErrors 5 macTxErrors 6 deferTxErrors 7 packetErrors 8 linkInactiveErrors 9 unknownProtoErrors 10 inFlwctrlErrors 11 outFlwctrlErrors 12 alignErrors 13 fcsErrors 14 framesLongErrors 15 tooShortErrors 16 linkFailureErrors 17 carrierSenseErrors 18 carrierErrors 19 sqeTestErrors	.1.3.6.1.4.1.2272.1.85.3.15.1.3
rcKhiChassisPowerSupplyFirstStateChangeTime Time at which Power Supply State first change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.15.1.4
rcKhiChassisPowerSupplyStatusIndication Power Supply status indication	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.15.1.5

rcKhiChassisPowerSupplyHistoryTable

table

.1.3.6.1.4.1.2272.1.85.3.16 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisPowerSupplyHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisPowerSupplyHistoryTable'

Copy

Power Supply table include power supply history info

rcKhiChassisPowerSupplyHistoryEntry row .1.3.6.1.4.1.2272.1.85.3.16.1

A chassis power supply history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisPowerSupplyHistoryPSId An unique index used to identify a particular PowerSupply in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.16.1.1
rcKhiChassisPowerSupplyHistoryIndex history index for a particular power supply	Integer32	.1.3.6.1.4.1.2272.1.85.3.16.1.2
rcKhiChassisPowerSupplyHistoryOperStateChange Power supply operational state change. Green if power supply comes up and Red if it goes down	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.16.1.3
rcKhiChassisPowerSupplyHistoryOperStateChangeTime Time at which the power supply operational state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.16.1.4

rcKhiChassisLineCardTable

table

.1.3.6.1.4.1.2272.1.85.3.17 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisLineCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisLineCardTable'

Copy

table include line card statistics

rcKhiChassisLineCardEntry row .1.3.6.1.4.1.2272.1.85.3.17.1

A chassis line card table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisLineCardSlot An unique index used to identify a particular slot of line card in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.17.1.1
rcKhiChassisLineCardOperState Line card operational state	Enumeration	.1.3.6.1.4.1.2272.1.85.3.17.1.2
rcKhiChassisLineCardAdminState Line card administrative state	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.85.3.17.1.3
rcKhiChassisLineCardFirstStateChange Line card first operational state change after boot or clear.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.17.1.4
rcKhiChassisLineCardFirstStateChangeTime The time at which line card first operational state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.17.1.5
rcKhiChassisLineCardStatusIndication Line card Status indication	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.17.1.6

rcKhiChassisLineCardHistoryTable

table

.1.3.6.1.4.1.2272.1.85.3.18 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiChassisLineCardHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiChassisLineCardHistoryTable'

Copy

Line card table include line card history info

rcKhiChassisLineCardHistoryEntry row .1.3.6.1.4.1.2272.1.85.3.18.1

A chassis line card history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiChassisLineCardHistoryLCId An unique index used to identify a particular LineCard in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.3.18.1.1
rcKhiChassisLineCardHistoryIndex history index for a particular line card	Integer32	.1.3.6.1.4.1.2272.1.85.3.18.1.2
rcKhiChassisLineCardHistoryOperStateChange Line card operational state change. Green if operationally up. Yellow if operationally down and adminstratively disabled. Red if operationally down and adminstratively enabled	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.3.18.1.3
rcKhiChassisLineCardHistoryOperStateChangeTime Time at which the line card operational state change occur.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.3.18.1.4

rcKhiPerformanceSuspendedTaskTable

table

.1.3.6.1.4.1.2272.1.85.4.30 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPerformanceSuspendedTaskTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPerformanceSuspendedTaskTable'

Copy

Suspended tasks table

rcKhiPerformanceSuspendedTaskEntry row .1.3.6.1.4.1.2272.1.85.4.30.1

Suspeded task table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPerformanceSuspendedTaskIndex An unique index used to identify a particular supended task index	Integer32	.1.3.6.1.4.1.2272.1.85.4.30.1.1
rcKhiPerformanceSuspendedTaskId An unique task id of suspeded task	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.4.30.1.2
rcKhiPerformanceSuspendedTaskName An unique task id of suspeded task	OctetString	.1.3.6.1.4.1.2272.1.85.4.30.1.3
rcKhiPerformanceSuspendedTaskSuspendedTime Suspeded task time	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.30.1.4

rcKhiPerformanceHistoryTable

table

.1.3.6.1.4.1.2272.1.85.4.31 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPerformanceHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPerformanceHistoryTable'

Copy

Performance History table

rcKhiPerformanceHistoryEntry row .1.3.6.1.4.1.2272.1.85.4.31.1

History Performance table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPerformanceHistoryIndex An unique index used to identify a particular performance history record	Integer32	.1.3.6.1.4.1.2272.1.85.4.31.1.1
rcKhiPerformanceHistoryCpuUtil History record for CPU utilization	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.2
rcKhiPerformanceHistoryCpuUtilTimeStamp Timestamp of the historical cpu utilization	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.3
rcKhiPerformanceHistorySwitchFabricUtil History Percentage of Switching Fabric utilization	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.4
rcKhiPerformanceHistorySwitchFabricUtilTimeStamp Timestamp of the historical switch fabric Utilization	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.5
rcKhiPerformanceHistoryOtherSwitchFabricUtil History Percentage of Other Switching Fabric utilization	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.6
rcKhiPerformanceHistoryOtherSwitchFabricUtilTimeStamp Timestamp of the historical other switch fabric Utilization	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.7
rcKhiPerformanceHistoryBufferUtil History Percentage of Buffer utilization	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.8
rcKhiPerformanceHistoryBufferUtilTimeStamp Timestamp of the historical Buffer Utilization	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.9
rcKhiPerformanceHistoryDRamUsed History DRAM Used	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.10
rcKhiPerformanceHistoryDRamUsedTimeStamp Timestamp of the historical DRAM Used	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.11
rcKhiPerformanceHistoryCPUControlTimeStamp Timestamp of the historical CPU Control	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.4.31.1.12
rcKhiPerformanceHistoryNoFBuf History Number of None Free Buffer	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.13
rcKhiPerformanceHistoryTxPacketsDropped History Tx Packets Dropped	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.14
rcKhiPerformanceHistoryOutError History Out Errors	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.4.31.1.15

rcKhiPortStateEventsHistoryTable

table

.1.3.6.1.4.1.2272.1.85.5.2.43 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPortStateEventsHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPortStateEventsHistoryTable'

Copy

Port State Events Historical Data.

rcKhiPortStateEventsHistoryEntry row .1.3.6.1.4.1.2272.1.85.5.2.43.1

Port State Events history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPortStateEventsHistoryIndex Historical data index number.	Integer32	.1.3.6.1.4.1.2272.1.85.5.2.43.1.1
rcKhiPortStateEventsHistoryTimestamp Timestamp indicating when the event occurred.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.5.2.43.1.2
rcKhiPortStateEventsHistoryPort Port number where the event occurred.	Integer32	.1.3.6.1.4.1.2272.1.85.5.2.43.1.3
rcKhiPortStateEventsHistoryEvent Indication about the event-type.	Enumeration	.1.3.6.1.4.1.2272.1.85.5.2.43.1.4

rcKhiPortErrorsEventsTable

table

.1.3.6.1.4.1.2272.1.85.5.3.1 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPortErrorsEventsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPortErrorsEventsTable'

Copy

Port Error Events Data.

rcKhiPortErrorsEventsEntry row .1.3.6.1.4.1.2272.1.85.5.3.1.1

Port error events table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPortErrorsEventsPortNum Port number where the event occurred.	Integer32	.1.3.6.1.4.1.2272.1.85.5.3.1.1.1
rcKhiPortErrorsEventsSingleCollisionErr Health Indication for Single Collisions errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.2
rcKhiPortErrorsEventsMultipleCollisionErr Health Indication for Multiple Collisions errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.3
rcKhiPortErrorsEventsLateCollisionErr Health Indication for Late Collisions errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.4
rcKhiPortErrorsEventsExcessiveCollisionErr Health Indication for Excessive Collisions errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.5
rcKhiPortErrorsEventsMacRxErr Health Indication for Mac Rx errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.6
rcKhiPortErrorsEventsMacTxErr Health Indication for Mac Tx errors on the port.	KhiStatusValue Constraints: range: 1-10 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.7
rcKhiPortErrorsEventsDeferTxErr Health Indication for Defer Tx errors on the port.	KhiStatusValue Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.2272.1.85.5.3.1.1.8
rcKhiPortErrorsEventsPacketErr Health Indication for Packet errors on the port.	KhiStatusValue Enumerated Values: 0 cifParityError 1 cifProtocolError 2 eme0ParityError 3 eme1ParityError 4 bapHostReadError 5 bapHostWriteError 6 bapClockPLLNotLocked 7 bapTxClockPLLNotLocked 8 bapMemoryClockPLLNotLocked 9 gabError 10 bapIntfTimeout 11 bapIntfError 12 bapDecoderError 13 bapDecoderSpecialAccessError 14 bapControllerWriteError 15 bapControllerReadError 16 bapGABError 17 ime0Disabled 18 ime1Disabled 19 hashEngineDisabled 20 multiplicationEngineDisabled 21 fdibEmptyPktWrongPTMAccess 22 fdibPastEndOfPktError 23 fdibFifoEmptyWrongPMAccess 24 fdibInvalidPage 25 fifoFull 26 fdibMixedAccess 27 fdobPMError 28 fdobIsFull 29 fdobIsEmpty 30 ptmBusError 31 pmProgramCounterError 32 pmStatsBUSError 33 pmFDIBHPIBUSError 34 pmEME1ParityError 35 pmEME0ParityError 36 pmMulticastError 37 pmFrameError 38 pmPopRollover 39 pmReleaseError 40 amUnsupportedOptypeForRegionOrDeviceException 41 amIllegalRegionOrSubregionException 42 amSearchRunOnException 43 amSearchBusErrorException 44 amParityErrorException 45 amProtocolErrorException 46 amIllegalArgumentException 47 amNonAllignedAddressException 48 amPacketMemoryBusErrorException 49 amPacketHeaderAddressErrorException 50 amLookupContinueZeroException 51 amUnsupportedRSVD8Exception 52 amUnsupportedRSVD10Exception 53 amUnsupportedRSVD1Exception 54 amUnsupportedRSVD2Exception 55 amUnsupportedRSVD3Exception 56 amUnsupportedRSVD4Exception 57 amUnsupportedRSVD5Exception 58 amUnsupportedUnknownHWFailureException 59 amSoftwareInterrupt 60 missingRSPHeartbeats	.1.3.6.1.4.1.2272.1.85.5.3.1.1.9
rcKhiPortErrorsEventsLinkInactiveErr Health Indication for Link Inactive errors on the port.	KhiStatusValue Enumerated Values: 0 cifParityError 1 cifProtocolError 2 eme0ParityError 3 eme1ParityError 4 bapHostReadError 5 bapHostWriteError 6 bapClockPLLNotLocked 7 bapTxClockPLLNotLocked 8 bapMemoryClockPLLNotLocked 9 gabError 10 bapIntfTimeout 11 bapIntfError 12 bapDecoderError 13 bapDecoderSpecialAccessError 14 bapControllerWriteError 15 bapControllerReadError 16 bapGABError 17 ime0Disabled 18 ime1Disabled 19 hashEngineDisabled 20 multiplicationEngineDisabled 21 fdibEmptyPktWrongPTMAccess 22 fdibPastEndOfPktError 23 fdibFifoEmptyWrongPMAccess 24 fdibInvalidPage 25 fifoFull 26 fdibMixedAccess 27 fdobPMError 28 fdobIsFull 29 fdobIsEmpty 30 ptmBusError 31 pmProgramCounterError 32 pmStatsBUSError 33 pmFDIBHPIBUSError 34 pmEME1ParityError 35 pmEME0ParityError 36 pmMulticastError 37 pmFrameError 38 pmPopRollover 39 pmReleaseError 40 amUnsupportedOptypeForRegionOrDeviceException 41 amIllegalRegionOrSubregionException 42 amSearchRunOnException 43 amSearchBusErrorException 44 amParityErrorException 45 amProtocolErrorException 46 amIllegalArgumentException 47 amNonAllignedAddressException 48 amPacketMemoryBusErrorException 49 amPacketHeaderAddressErrorException 50 amLookupContinueZeroException 51 amUnsupportedRSVD8Exception 52 amUnsupportedRSVD10Exception 53 amUnsupportedRSVD1Exception 54 amUnsupportedRSVD2Exception 55 amUnsupportedRSVD3Exception 56 amUnsupportedRSVD4Exception 57 amUnsupportedRSVD5Exception 58 amUnsupportedUnknownHWFailureException 59 amSoftwareInterrupt 60 missingRSPHeartbeats	.1.3.6.1.4.1.2272.1.85.5.3.1.1.10
rcKhiPortErrorsEventsUnknownProtoErr Health Indication for Unknown Proto errors on the port.	KhiStatusValue Enumerated Values: 0 cifParityError 1 cifProtocolError 2 eme0ParityError 3 eme1ParityError 4 bapHostReadError 5 bapHostWriteError 6 bapClockPLLNotLocked 7 bapTxClockPLLNotLocked 8 bapMemoryClockPLLNotLocked 9 gabError 10 bapIntfTimeout 11 bapIntfError 12 bapDecoderError 13 bapDecoderSpecialAccessError 14 bapControllerWriteError 15 bapControllerReadError 16 bapGABError 17 ime0Disabled 18 ime1Disabled 19 hashEngineDisabled 20 multiplicationEngineDisabled 21 fdibEmptyPktWrongPTMAccess 22 fdibPastEndOfPktError 23 fdibFifoEmptyWrongPMAccess 24 fdibInvalidPage 25 fifoFull 26 fdibMixedAccess 27 fdobPMError 28 fdobIsFull 29 fdobIsEmpty 30 ptmBusError 31 pmProgramCounterError 32 pmStatsBUSError 33 pmFDIBHPIBUSError 34 pmEME1ParityError 35 pmEME0ParityError 36 pmMulticastError 37 pmFrameError 38 pmPopRollover 39 pmReleaseError 40 amUnsupportedOptypeForRegionOrDeviceException 41 amIllegalRegionOrSubregionException 42 amSearchRunOnException 43 amSearchBusErrorException 44 amParityErrorException 45 amProtocolErrorException 46 amIllegalArgumentException 47 amNonAllignedAddressException 48 amPacketMemoryBusErrorException 49 amPacketHeaderAddressErrorException 50 amLookupContinueZeroException 51 amUnsupportedRSVD8Exception 52 amUnsupportedRSVD10Exception 53 amUnsupportedRSVD1Exception 54 amUnsupportedRSVD2Exception 55 amUnsupportedRSVD3Exception 56 amUnsupportedRSVD4Exception 57 amUnsupportedRSVD5Exception 58 amUnsupportedUnknownHWFailureException 59 amSoftwareInterrupt 60 missingRSPHeartbeats	.1.3.6.1.4.1.2272.1.85.5.3.1.1.11
rcKhiPortErrorsEventsInFlwctrlErr Health Indication for In Flwctrl errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.12
rcKhiPortErrorsEventsOutFlwctrlErr Health Indication for Out Flwctrl errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.13
rcKhiPortErrorsEventsAlignErr Health Indication for Align errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.14
rcKhiPortErrorsEventsFCSErr Health Indication for FCS errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.15
rcKhiPortErrorsEventsFramesLongErr Health Indication for Frames Long errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.16
rcKhiPortErrorsEventsTooShortErr Health Indication for Too Short errors on the port.	KhiStatusValue Constraints: range: 1-10 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.17
rcKhiPortErrorsEventsLinkFailureErr Health Indication for Link Failure errors on the port.	KhiStatusValue Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.2272.1.85.5.3.1.1.18
rcKhiPortErrorsEventsCarrierSenseErr Health Indication for Carrier Sense errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.19
rcKhiPortErrorsEventsCarrierErr Health Indication for Carrier errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.20
rcKhiPortErrorsEventsSQETestErr Health Indication for SQE Test errors on the port.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.5.3.1.1.21

rcKhiPortErrorsHistoryTable

table

.1.3.6.1.4.1.2272.1.85.5.3.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPortErrorsHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPortErrorsHistoryTable'

Copy

Port Errors Historical Data.

rcKhiPortErrorsHistoryEntry row .1.3.6.1.4.1.2272.1.85.5.3.2.1

Port errors history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPortErrorsHistoryIndex Index number.	Integer32	.1.3.6.1.4.1.2272.1.85.5.3.2.1.1
rcKhiPortErrorsHistoryTimestamp Timestamp indicating when the event occurred.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.5.3.2.1.2
rcKhiPortErrorsHistoryPort Port number where the event occurred.	Integer32	.1.3.6.1.4.1.2272.1.85.5.3.2.1.3
rcKhiPortErrorsHistoryErrorEvents This is used to specify the port error information. bit 0 - Single Collision Errors bit 1 - Multiple Collision Errors bit 2 - Late Collision Errors bit 3 - Excessive Collision Errors bit 4 - Mac Rx Errors bit 5 - …	Bits	.1.3.6.1.4.1.2272.1.85.5.3.2.1.4

rcKhiForwardingAsicHealthTable

table

.1.3.6.1.4.1.2272.1.85.6.1 · 1 row entry · 55 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingAsicHealthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingAsicHealthTable'

Copy

Forwarding Asic Key Health Indicator MIB.

rcKhiForwardingAsicHealthEntry row .1.3.6.1.4.1.2272.1.85.6.1.1

Forwarding KHI - Asic Health table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingAsicHealthSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.1.1.1
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstCnt Total number of Left Lane Ingress RSP Combined Back Pressure Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.2
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstCnt Total number of Middle Lane Ingress RSP Combined Back Pressure Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.3
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstCnt Total number of Right Lane Ingress RSP Combined Back Pressure Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.4
rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstStatus Left Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.5
rcKhiForwardingAsicHealthMidLnIngBkPrsureRstStatus Middle Lane ngress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.6
rcKhiForwardingAsicHealthRightLnIngBkPrsureRstStatus Right Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.7
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstCnt Total number of Left Lane Ingress RSP SPI Protocol Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.8
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstCnt Total number of Middle Lane Ingress RSP SPI Protocol Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.9
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstCnt Total number of Right Lane Ingress RSP SPI Protocol Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.10
rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstStatus Left Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.11
rcKhiForwardingAsicHealthMidLnIngSPIProtoRstStatus Middle Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.12
rcKhiForwardingAsicHealthRightLnIngSPIProtoRstStatus Right Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.13
rcKhiForwardingAsicHealthLeftLnIngSPIDefragCnt Total number of Left Lane Ingress RSP SPI Defrag Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.14
rcKhiForwardingAsicHealthMidLnIngSPIDefragCnt Total number of Middle Lane Ingress RSP SPI Defrag Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.15
rcKhiForwardingAsicHealthRightLnIngSPIDefragCnt Total number of Right Lane Ingress RSP SPI Defrag Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.16
rcKhiForwardingAsicHealthLeftLnIngSPIDefragStatus Left Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.17
rcKhiForwardingAsicHealthMidLnIngSPIDefragStatus Middle Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.18
rcKhiForwardingAsicHealthRightLnIngSPIDefragStatus Right Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.19
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstCnt Total number of Left Lane Egress RSP Multicast Queue Full Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.20
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstCnt Total number of Middle Lane Egress RSP Multicast Queue Full Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.21
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstCnt Total number of Right Lane Egress RSP Multicast Queue Full Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.22
rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstStatus Left Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.23
rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstStatus Middle Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.24
rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstStatus Right Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.25
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstCnt Total number of Left Lane Egress RSP Free Page Error Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.26
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstCnt Total number of Middle Lane Egress RSP Free Page Error Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.27
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstCnt Total number of Right Lane Egress RSP Free Page Error Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.28
rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstStatus Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.29
rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstStatus Middle Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.30
rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstStatus Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.31
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstCnt Total number of Left Lane Egress RSP Unicast Queue Full Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.32
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstCnt Total number of Middle Lane Egress RSP Unicast Queue Full Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.33
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstCnt Total number of Right Lane Egress RSP Unicast Queue Full Resets.	SNMPv2-SMIInteger32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.1.1.34
rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstStatus Left Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Enumerated Values: 0 policeDrops 1 foqDrops 2 fabricDrops 3 legacyDrops 4 f2eCombinedPktMemoryThresholdExceeded 5 f2eHABMasterFIFOParityErr 6 f2eEgressSPI42SyncErr 7 f2eLoopSPI42SyncErr 8 f2eCIFIllegalOperation 9 f2eCIFProtocolErr 10 f2eCIFErroredData 11 f2eCIFIllegalAddress 12 f2eCIFReadErrInTargetData 13 f2eEgressQueueDrops 14 f2iIngressSPI42ProtocolErr 15 f2iIngressSPI42OverflowErr 16 f2iIngressSPI42AbortReceived 17 f2iIngressSPI42DataDIP4ErrDetected 18 f2iIngressSPI42SyncErr 19 f2iLoopSPI42ProtocolErr 20 f2iLoopSPI42OverflowErr 21 f2iLoopSPI42AbortReceived 22 f2iLoopSPI42DataDIP4ErrDetected 23 f2iLoopSPI42SyncErr 24 f2iHABSlaveFIFOParityErr 25 f2iHABSlaveFIFOOverflow 26 f2iHABSlaveDataParityErr 27 f2iHABSlaveProtocolErr 28 f2iHABSlaveDataErr 29 f2iFOQMProtocolErr 30 f2iFOQMOverflow 31 f2ePacketParityErrDetected 32 f2eParityErrInPktMemoryData 33 f2eParityErrInPktMemoryControl 34 f2ePktMemoryParityErr	.1.3.6.1.4.1.2272.1.85.6.1.1.35
rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstStatus Middle Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Enumerated Values: 0 policeDrops 1 foqDrops 2 fabricDrops 3 legacyDrops 4 f2eCombinedPktMemoryThresholdExceeded 5 f2eHABMasterFIFOParityErr 6 f2eEgressSPI42SyncErr 7 f2eLoopSPI42SyncErr 8 f2eCIFIllegalOperation 9 f2eCIFProtocolErr 10 f2eCIFErroredData 11 f2eCIFIllegalAddress 12 f2eCIFReadErrInTargetData 13 f2eEgressQueueDrops 14 f2iIngressSPI42ProtocolErr 15 f2iIngressSPI42OverflowErr 16 f2iIngressSPI42AbortReceived 17 f2iIngressSPI42DataDIP4ErrDetected 18 f2iIngressSPI42SyncErr 19 f2iLoopSPI42ProtocolErr 20 f2iLoopSPI42OverflowErr 21 f2iLoopSPI42AbortReceived 22 f2iLoopSPI42DataDIP4ErrDetected 23 f2iLoopSPI42SyncErr 24 f2iHABSlaveFIFOParityErr 25 f2iHABSlaveFIFOOverflow 26 f2iHABSlaveDataParityErr 27 f2iHABSlaveProtocolErr 28 f2iHABSlaveDataErr 29 f2iFOQMProtocolErr 30 f2iFOQMOverflow 31 f2ePacketParityErrDetected 32 f2eParityErrInPktMemoryData 33 f2eParityErrInPktMemoryControl 34 f2ePktMemoryParityErr	.1.3.6.1.4.1.2272.1.85.6.1.1.36
rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstStatus Right Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Enumerated Values: 0 policeDrops 1 foqDrops 2 fabricDrops 3 legacyDrops 4 f2eCombinedPktMemoryThresholdExceeded 5 f2eHABMasterFIFOParityErr 6 f2eEgressSPI42SyncErr 7 f2eLoopSPI42SyncErr 8 f2eCIFIllegalOperation 9 f2eCIFProtocolErr 10 f2eCIFErroredData 11 f2eCIFIllegalAddress 12 f2eCIFReadErrInTargetData 13 f2eEgressQueueDrops 14 f2iIngressSPI42ProtocolErr 15 f2iIngressSPI42OverflowErr 16 f2iIngressSPI42AbortReceived 17 f2iIngressSPI42DataDIP4ErrDetected 18 f2iIngressSPI42SyncErr 19 f2iLoopSPI42ProtocolErr 20 f2iLoopSPI42OverflowErr 21 f2iLoopSPI42AbortReceived 22 f2iLoopSPI42DataDIP4ErrDetected 23 f2iLoopSPI42SyncErr 24 f2iHABSlaveFIFOParityErr 25 f2iHABSlaveFIFOOverflow 26 f2iHABSlaveDataParityErr 27 f2iHABSlaveProtocolErr 28 f2iHABSlaveDataErr 29 f2iFOQMProtocolErr 30 f2iFOQMOverflow 31 f2ePacketParityErrDetected 32 f2eParityErrInPktMemoryData 33 f2eParityErrInPktMemoryControl 34 f2ePktMemoryParityErr	.1.3.6.1.4.1.2272.1.85.6.1.1.37
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtRstCnt Total number of Left Lane Egress RSP Free Pages at Lower Limit Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.39
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtRstCnt Total number of Middle Lane Egress RSP Free Pages at Lower Limit Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.40
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtRstCnt Total number of Right Lane Egress RSP Free Pages at Lower Limit Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.41
rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtStatus Left Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.42
rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtStatus Middle Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.43
rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtStatus Right Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Constraints: range: 1-10 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.44
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchRstCnt Total number of Left Lane Egress RSP Replication ID Mismatch Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.45
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchRstCnt Total number of Middle Lane Egress RSP Replication ID Mismatch Resets.	SNMPv2-SMIInteger32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.1.1.46
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchRstCnt Total number of Right Lane Egress RSP Replication ID Mismatch Resets.	SNMPv2-SMIInteger32 Enumerated Values: 1 leftLane 2 middleLane 3 rightLane Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.47
rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchStatus Left Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Constraints: range: 0-50 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.48
rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchStatus Middle Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.49
rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchStatus Right Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.50
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepRstCnt Total number of Left Lane Egress RSP No Beep-Beep Resets.	SNMPv2-SMIInteger32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.1.1.51
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepRstCnt Total number of Middle Lane Egress RSP No Beep-Beep Resets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.52
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepRstCnt Total number of Right Lane Egress RSP No Beep-Beep Resets.	SNMPv2-SMIInteger32 Enumerated Values: 0 asicResets 1 rspStateErrors 2 rspStatsErrors 3 f2xErrors Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.6.1.1.53
rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepStatus Left Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.54
rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepStatus Middle Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Enumerated Values: 0 asicResets 1 rspStateErrors 2 rspStatsErrors 3 f2xErrors	.1.3.6.1.4.1.2272.1.85.6.1.1.55
rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepStatus Right Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.1.1.56

rcKhiForwardingRSPStateTable

table

.1.3.6.1.4.1.2272.1.85.6.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRSPStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRSPStateTable'

Copy

Forwarding Key Health Indicator MIB - RSP Stats.

rcKhiForwardingRSPStateEntry row .1.3.6.1.4.1.2272.1.85.6.2.1

Forwarding KHI - RSP State table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRSPStateSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.2.1.1
rcKhiForwardingRSPStateDirection Direction - Ingress or Egress.	Enumeration Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.2.1.2
rcKhiForwardingRSPStateLeftLnErrMask Left Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read Er…	Bits	.1.3.6.1.4.1.2272.1.85.6.2.1.3
rcKhiForwardingRSPStateMidLnErrMask Middle Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read …	Bits	.1.3.6.1.4.1.2272.1.85.6.2.1.4
rcKhiForwardingRSPStateRightLnErrMask Right Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read E…	Bits	.1.3.6.1.4.1.2272.1.85.6.2.1.5
rcKhiForwardingRSPStateLeftLnHealthStatus Indicates the Left Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.2.1.6
rcKhiForwardingRSPStateMidLnHealthStatus Indicates the Middle Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.2.1.7
rcKhiForwardingRSPStateRightLnHealthStatus Indicates the Right Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.2.1.8

rcKhiForwardingRSPStatsTable

table

.1.3.6.1.4.1.2272.1.85.6.3 · 1 row entry · 44 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRSPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRSPStatsTable'

Copy

Forwarding Key Health Indicator MIB - RSP Stats.

rcKhiForwardingRSPStatsEntry row .1.3.6.1.4.1.2272.1.85.6.3.1

Forwarding KHI - RSP Stats table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRSPStatsSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.3.1.1
rcKhiForwardingRSPStatsDirection Direction - Ingress or Egress.	Enumeration	.1.3.6.1.4.1.2272.1.85.6.3.1.2
rcKhiForwardingRSPStatsLeftLnTotalAMPkts Left Lane RSP Total AM Packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.3
rcKhiForwardingRSPStatsMidLnTotalAMPkts Middle Lane RSP Total AM Packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.4
rcKhiForwardingRSPStatsRightLnTotalAMPkts Right Lane RSP Total AM Packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.5
rcKhiForwardingRSPStatsLeftLnTotalAMRxErrPkts Left Lane RSP Total AM Rx Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.6
rcKhiForwardingRSPStatsMidLnTotalAMRxErrPkts Middle Lane RSP Total AM Rx Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.7
rcKhiForwardingRSPStatsRightLnTotalAMRxErrPkts Right Lane RSP Total AM Rx Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.8
rcKhiForwardingRSPStatsLeftLnAMRxErrPktsStatus Left Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.9
rcKhiForwardingRSPStatsMidLnAMRxErrPktsStatus Middle Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Constraints: range: 0-255 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.10
rcKhiForwardingRSPStatsRightLnAMRxErrPktsStatus Right Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.11
rcKhiForwardingRSPStatsLeftLnTotalAMShortPkts Left Lane RSP Total AM Short Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.12
rcKhiForwardingRSPStatsMidLnTotalAMShortPkts Middle Lane RSP Total AM Short Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.13
rcKhiForwardingRSPStatsRightLnTotalAMShortPkts Right Lane RSP Total AM Short Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.14
rcKhiForwardingRSPStatsLeftLnAMShortPktsStatus Left Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.15
rcKhiForwardingRSPStatsMidLnAMShortPktsStatus Middle Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.16
rcKhiForwardingRSPStatsRightLnAMShortPktsStatus Right Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.17
rcKhiForwardingRSPStatsLeftLnTotalAMCongestionDrops Left Lane RSP Total AM Congestion Drop Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.18
rcKhiForwardingRSPStatsMidLnTotalAMCongestionDrops Middle Lane RSP Total AM Congestion Drop Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.19
rcKhiForwardingRSPStatsRightLnTotalAMCongestionDrops Right Lane RSP Total AM Congestion Drop Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.20
rcKhiForwardingRSPStatsLeftLnAMCongestionDropStatus Left Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Constraints: range: 0-255 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.21
rcKhiForwardingRSPStatsMidLnAMCongestionDropStatus Middle Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Constraints: range: 1-10 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.22
rcKhiForwardingRSPStatsRightLnAMCongestionDropStatus Right Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.23
rcKhiForwardingRSPStatsLeftLnTotalAMProcErrPkts Left Lane RSP Total AM Proc Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.24
rcKhiForwardingRSPStatsMidLnTotalAMProcErrPkts Middle Lane RSP Total AM Proc Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.25
rcKhiForwardingRSPStatsRightLnTotalAMProcErrPkts Right Lane RSP Total AM Proc Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.26
rcKhiForwardingRSPStatsLeftLnAMProcErrPktsStatus Left Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.27
rcKhiForwardingRSPStatsMidLnAMProcErrPktsStatus Middle Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Constraints: range: 0-255 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.28
rcKhiForwardingRSPStatsRightLnAMProcErrPktsStatus Right Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.29
rcKhiForwardingRSPStatsLeftLnTotalAMExpPkts Left Lane RSP Total AM Exp Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.30
rcKhiForwardingRSPStatsMidLnTotalAMExpPkts Middle Lane RSP Total AM Exp Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.31
rcKhiForwardingRSPStatsRightLnTotalAMExpPkts Right Lane RSP Total AM Exp Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.32
rcKhiForwardingRSPStatsLeftLnAMExpPktsStatus Left Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.33
rcKhiForwardingRSPStatsMidLnAMExpPktsStatus Middle Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.34
rcKhiForwardingRSPStatsRightLnAMExpPktsStatus Right Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.35
rcKhiForwardingRSPStatsLeftLnTotalPMFwdPkts Left Lane RSP Total PM Forwarded Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.36
rcKhiForwardingRSPStatsMidLnTotalPMFwdPkts Middle Lane RSP Total PM Forwarded Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.37
rcKhiForwardingRSPStatsRightLnTotalPMFwdPkts Right Lane RSP Total PM Forwarded Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.38
rcKhiForwardingRSPStatsLeftLnTotalPMDropErrPkts Left Lane RSP Total PM Dropped Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.39
rcKhiForwardingRSPStatsMidLnTotalPMDropErrPkts Middle Lane RSP Total PM Dropped Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.40
rcKhiForwardingRSPStatsRightLnTotalPMDropErrPkts Right Lane RSP Total PM Dropped Error Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.3.1.41
rcKhiForwardingRSPStatsLeftLnPMDropErrStatus Left Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.42
rcKhiForwardingRSPStatsMidLnPMDropErrStatus Middle Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.43
rcKhiForwardingRSPStatsRightLnPMDropErrStatus Right Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow.	KhiStatusValue Constraints: range: 0-255 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.3.1.44

rcKhiForwardingF2XHealthTable

table

.1.3.6.1.4.1.2272.1.85.6.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingF2XHealthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingF2XHealthTable'

Copy

Forwarding Key Health Indicator MIB - F2X (F2I and F2E) Health.

rcKhiForwardingF2XHealthEntry row .1.3.6.1.4.1.2272.1.85.6.4.1

Forwarding KHI - F2X Health table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingF2XHealthSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.4.1.1
rcKhiForwardingF2XHealthLeftLnErrMask Left Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow. …	Bits	.1.3.6.1.4.1.2272.1.85.6.4.1.2
rcKhiForwardingF2XHealthMidLnErrMask Middle Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow…	Bits	.1.3.6.1.4.1.2272.1.85.6.4.1.3
rcKhiForwardingF2XHealthRightLnErrMask Right Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow.…	Bits	.1.3.6.1.4.1.2272.1.85.6.4.1.4
rcKhiForwardingF2XHealthLeftLnHealthStatus Indicates the Left Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Constraints: range: 0-255 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.4.1.5
rcKhiForwardingF2XHealthMidLnHealthStatus Indicates the Middle Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.4.1.6
rcKhiForwardingF2XHealthRightLnHealthStatus Indicates the Right Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.4.1.7

rcKhiForwardingHistoryTable

table

.1.3.6.1.4.1.2272.1.85.6.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingHistoryTable'

Copy

Forwarding Key Health Indicator MIB - Historical Data.

rcKhiForwardingHistoryEntry row .1.3.6.1.4.1.2272.1.85.6.5.1

Forwarding KHI - History table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingHistoryIndex Index for Forwarding Health historical data.	Integer32	.1.3.6.1.4.1.2272.1.85.6.5.1.1
rcKhiForwardingHistoryTimeStamp Timestamp indicating when a particular event occurred.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.6.5.1.2
rcKhiForwardingHistorySlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.5.1.3
rcKhiForwardingHistoryLane Lane where the event occurred.	Enumeration	.1.3.6.1.4.1.2272.1.85.6.5.1.4
rcKhiForwardingHistoryEvent Name of the event	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.85.6.5.1.5

rcKhiForwardingCurrentStatusTable

table

.1.3.6.1.4.1.2272.1.85.6.6 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCurrentStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCurrentStatusTable'

Copy

Forwarding Key Health Indicator MIB - 
Current Status Info.

rcKhiForwardingCurrentStatusEntry row .1.3.6.1.4.1.2272.1.85.6.6.1

Forwarding KHI - Current Status table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCurrentStatusSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.6.1.1
rcKhiForwardingCurrentStatusLeftLnHealth Indicates the Left Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.6.1.2
rcKhiForwardingCurrentStatusLeftLnErrMask Left Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 - R…	Bits	.1.3.6.1.4.1.2272.1.85.6.6.1.3
rcKhiForwardingCurrentStatusMidLnHealth Indicates the Middle Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number.	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.6.1.4
rcKhiForwardingCurrentStatusMidLnErrMask Middle Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 -…	Bits Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.85.6.6.1.5
rcKhiForwardingCurrentStatusRightLnHealth Indicates the Right Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number.	KhiStatusValue Constraints: range: 1-10 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.6.6.1.6
rcKhiForwardingCurrentStatusRightLnErrMask Right Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 - …	Bits	.1.3.6.1.4.1.2272.1.85.6.6.1.7

rcKhiForwardingMonitoringCountersTable

table

.1.3.6.1.4.1.2272.1.85.6.7 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingMonitoringCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingMonitoringCountersTable'

Copy

Forwarding Monitoring Counters MIB.

rcKhiForwardingMonitoringCountersEntry row .1.3.6.1.4.1.2272.1.85.6.7.1

Forwarding KHI - Monitoring Counters table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingMonitoringCountersSlotNumber Slot Number.	Integer32	.1.3.6.1.4.1.2272.1.85.6.7.1.1
rcKhiForwardingMonitoringCountersLeftLnPassPacketsCnt Total number of Left Lane Pass Packets Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.2
rcKhiForwardingMonitoringCountersMidLnPassPacketsCnt Total number of Middle Lane Pass Packets Count	SNMPv2-SMICounter64 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.85.6.7.1.3
rcKhiForwardingMonitoringCountersRightLnPassPacketsCnt Total number of Right Lane Pass Packets Count	SNMPv2-SMICounter64 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.7.1.4
rcKhiForwardingMonitoringCountersLeftLnFabricDropsCnt Total number of Left Lane Fabric Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.5
rcKhiForwardingMonitoringCountersMidLnFabricDropsCnt Total number of Middle Lane Fabric Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.6
rcKhiForwardingMonitoringCountersRightLnFabricDropsCnt Total number of Right Lane Fabric Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.7
rcKhiForwardingMonitoringCountersLeftLnPoliceDropsCnt Total number of Left Lane Police Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.8
rcKhiForwardingMonitoringCountersMidLnPoliceDropsCnt Total number of Middle Lane Police Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.9
rcKhiForwardingMonitoringCountersRightLnPoliceDropsCnt Total number of Right Lane Police Drops Count	SNMPv2-SMICounter64 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.7.1.10
rcKhiForwardingMonitoringCountersLeftLnFoqDropsCnt Total number of Left Lane Foq Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.11
rcKhiForwardingMonitoringCountersMidLnFoqDropsCnt Total number of Middle Lane Foq Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.12
rcKhiForwardingMonitoringCountersRightLnFoqDropsCnt Total number of Right Lane Foq Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.13
rcKhiForwardingMonitoringCountersLeftLnLegacyDropsCnt Total number of Left Lane Legacy Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.14
rcKhiForwardingMonitoringCountersMidLnLegacyDropsCnt Total number of Middle Lane Legacy Drops Count	SNMPv2-SMICounter64 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.6.7.1.15
rcKhiForwardingMonitoringCountersRightLnLegacyDropsCnt Total number of Right Lane Legacy Drops Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.6.7.1.16

rcKhiOspfTable

table

.1.3.6.1.4.1.2272.1.85.7.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiOspfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiOspfTable'

Copy

Ospf protcol KHI summary

rcKhiOspfEntry row .1.3.6.1.4.1.2272.1.85.7.1.1

Ospf protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiOspfVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.1.1.1
rcKhiOspfRouteTableSize	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.1.1.2
rcKhiOspfRefRouteTableSize	SNMPv2-SMICounter32 Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.85.7.1.1.3
rcKhiOspfLsdbTableSize	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.1.1.4
rcKhiOspfNumOfInterfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.1.1.5
rcKhiOspfNumOfAdjacency	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.1.1.6
rcKhiOspfRefNumOfAdjacency	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.1.1.7
rcKhiOspfLastClearTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.1.1.8
rcKhiOspfFirstEventTimestamp	SNMPv2-TCDateAndTime Constraints: range: 0-10 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.1.1.9

rcKhiOspfHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiOspfHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiOspfHistoryTable'

Copy

Ospf protcol KHI summary

rcKhiOspfHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.2.1

Ospf protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiOspfHistoryVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.2.1.1
rcKhiOspfHistoryIndex History index for a particular VRF OSPF	Integer32	.1.3.6.1.4.1.2272.1.85.7.2.1.2
rcKhiOspfHistoryLsdbTableSize	SNMPv2-SMICounter32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.7.2.1.3
rcKhiOspfHistoryNumOfAdjacency	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.2.1.4
rcKhiOspfHistoryTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.2.1.5

rcKhiBgpTable

table

.1.3.6.1.4.1.2272.1.85.7.3 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiBgpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiBgpTable'

Copy

Bgp protcol KHI summary

rcKhiBgpEntry row .1.3.6.1.4.1.2272.1.85.7.3.1

Bgp protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiBgpVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.3.1.1
rcKhiBgpUpdateSent	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.3.1.2
rcKhiBgpUpdateRecvd Update received	SNMPv2-SMICounter32 Constraints: range: 1-12 range: 21-26	.1.3.6.1.4.1.2272.1.85.7.3.1.3
rcKhiBgpNotifySent Notify sent	SNMPv2-SMICounter32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.85.7.3.1.4
rcKhiBgpNotifyRecvd BGP Notify received	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.85.7.3.1.5
rcKhiBgpBadEvents BGP bad event count	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.85.7.3.1.6
rcKhiBgpRouteTableSize BGP route table size	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.3.1.7
rcKhiBgpRefRouteTableSize BGP reference route table size	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.3.1.8
rcKhiBgpEstablishedNbrs BGP established neighbor	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.3.1.9
rcKhiBgpRefEstablishedNbrs BGP established neighbor	SNMPv2-SMICounter32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.85.7.3.1.10
rcKhiBgpNumOfAggregates Number of aggregates	SNMPv2-SMICounter32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.85.7.3.1.11
rcKhiBgpNumOfImportedRoutes Number of imported routes	SNMPv2-SMICounter32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.85.7.3.1.12
rcKhiBgpLastClearTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.3.1.13
rcKhiBgpFirstEventTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.3.1.14

rcKhiBgpHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiBgpHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiBgpHistoryTable'

Copy

Bgp protcol KHI summary

rcKhiBgpHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.4.1

Bgp protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiBgpHistoryVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.4.1.1
rcKhiBgpHistoryIndex History index for a particular VRF OSPF	Integer32	.1.3.6.1.4.1.2272.1.85.7.4.1.2
rcKhiBgpHistoryRibCount Number of BGP Rib	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.4.1.3
rcKhiBgpHistoryNumOfPeers Number of BGP peers	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.4.1.4
rcKhiBgpHistoryTimestamp BGP history timestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.4.1.5

rcKhiPimTable

table

.1.3.6.1.4.1.2272.1.85.7.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPimTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPimTable'

Copy

Pim protcol KHI summary

rcKhiPimEntry row .1.3.6.1.4.1.2272.1.85.7.5.1

Pim protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPimVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.5.1.1
rcKhiPimRoutes	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.85.7.5.1.2
rcKhiPimRefRoutes	SNMPv2-SMICounter32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.85.7.5.1.3
rcKhiPimAdjacencies	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.5.1.4
rcKhiPimRefAdjacencies	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.5.1.5
rcKhiPimLastClearTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.5.1.6
rcKhiPimFirstEventTimestamp	SNMPv2-TCDateAndTime Constraints: range: 0-2147483647 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.5.1.7

rcKhiPimHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiPimHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiPimHistoryTable'

Copy

Pim protcol KHI summary

rcKhiPimHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.6.1

Pim protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiPimHistoryVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.6.1.1
rcKhiPimHistoryIndex History index for a particular VRF PIM	Integer32	.1.3.6.1.4.1.2272.1.85.7.6.1.2
rcKhiPimHistoryRouteCount	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.6.1.3
rcKhiPimHistoryAdjacencies	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.6.1.4
rcKhiPimHistoryTimestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.6.1.5

rcKhiIgmpHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiIgmpHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiIgmpHistoryTable'

Copy

Igmp protcol KHI summary

rcKhiIgmpHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.7.1

Igmp protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiIgmpHistoryVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.7.1.1
rcKhiIgmpHistoryIndex History index for a particular VRF PIM	Integer32	.1.3.6.1.4.1.2272.1.85.7.7.1.2
rcKhiIgmpHistoryGroupCount	SNMPv2-SMICounter32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.85.7.7.1.3
rcKhiIgmpHistorySenderCount	SNMPv2-SMICounter32 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.85.7.7.1.4
rcKhiIgmpHistoryTimestamp	SNMPv2-TCDateAndTime Constraints: range: 1-1000 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.7.1.5

rcKhiIgmpSnoopHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.8 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiIgmpSnoopHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiIgmpSnoopHistoryTable'

Copy

IgmpSnoop protcol KHI summary

rcKhiIgmpSnoopHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.8.1

IgmpSnoop protcol KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiIgmpSnoopHistoryVrfId An unique index used to identify a particular fan in the system.	Integer32	.1.3.6.1.4.1.2272.1.85.7.8.1.1
rcKhiIgmpSnoopHistoryIndex History index for a particular VRF PIM	Integer32	.1.3.6.1.4.1.2272.1.85.7.8.1.2
rcKhiIgmpSnoopHistoryStreamCount IGMP Snoop stream count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.8.1.3
rcKhiIgmpSnoopHistoryHostCount IgmpSnoop hots count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.8.1.4
rcKhiIgmpSnoopHistoryTimestamp Igmp Snoop timestamp	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.8.1.5

rcKhiIstHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.28 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiIstHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiIstHistoryTable'

Copy

Ist protcol KHI history

rcKhiIstHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.28.1

Ist protcol KHI history entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiIstHistoryIndex History index for a particular IST history entry	Integer32	.1.3.6.1.4.1.2272.1.85.7.28.1.1
rcKhiIstHistoryIstStatus Status of the IST	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.7.28.1.2
rcKhiIstHistoryTimestamp Timestamp associated with IST history entry	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.28.1.3

rcKhiSmltHistoryTable

table

.1.3.6.1.4.1.2272.1.85.7.29 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiSmltHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiSmltHistoryTable'

Copy

Smlt protocol KHI history

rcKhiSmltHistoryEntry row .1.3.6.1.4.1.2272.1.85.7.29.1

Smlt protcol KHI history entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiSmltHistoryIndex History index for a particular SMLT history entry	Integer32	.1.3.6.1.4.1.2272.1.85.7.29.1.1
rcKhiSmltHistorySmltId SMLTID of the SMLT history entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.7.29.1.2
rcKhiSmltHistorySmltStatus Status of the SMLT	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.7.29.1.3
rcKhiSmltHistoryTimestamp Timestamp associated with IST history entry	SNMPv2-TCDateAndTime Constraints: range: 1-60 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.7.29.1.4

rcKhiSmltTable

table

.1.3.6.1.4.1.2272.1.85.7.30 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiSmltTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiSmltTable'

Copy

Smlt protocol KHI

rcKhiSmltEntry row .1.3.6.1.4.1.2272.1.85.7.30.1

Smlt protcol KHI entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiSmltId SMLTID of the SMLT entry, also used as index	Integer32	.1.3.6.1.4.1.2272.1.85.7.30.1.1
rcKhiSmltStatus Status of the SMLT	KhiStatusValue Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.7.30.1.2
rcKhiSmltUpEvents Number of SMLT Up Events	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.30.1.3
rcKhiSmltDownEvents Number of SMLT Down Events	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.7.30.1.4

rcKhiMgmtLogHistoryTable

table

.1.3.6.1.4.1.2272.1.85.8.6 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiMgmtLogHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiMgmtLogHistoryTable'

Copy

Log history KHI summary

rcKhiMgmtLogHistoryEntry row .1.3.6.1.4.1.2272.1.85.8.6.1

Log sttaus KHI summary entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiMgmtLogHistoryIndex An unique history index used to identify a particular entry in log history.	Integer32	.1.3.6.1.4.1.2272.1.85.8.6.1.1
rcKhiMgmtLogHistoryStatus Changing Status	KhiStatusValue Constraints: range: 1-60 Type Values: 1 green 2 yellow 3 red 4 adminDisable 5 notApplicable	.1.3.6.1.4.1.2272.1.85.8.6.1.2
rcKhiMgmtLogHistoryTimestamp Status change timestamp.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.8.6.1.3

rcKhiIpInterfaceHistoryTable

table

.1.3.6.1.4.1.2272.1.85.9.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiIpInterfaceHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiIpInterfaceHistoryTable'

Copy

Ip Interface Historical Data

rcKhiIpInterfaceHistoryEntry row .1.3.6.1.4.1.2272.1.85.9.1.1

Ip Interface history table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiIpInterfaceHistoryIndex Historical data index number.	Integer32	.1.3.6.1.4.1.2272.1.85.9.1.1.1
rcKhiIpInterfaceHistoryTimestamp Timestamp indicating when the event occurred.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.9.1.1.2
rcKhiIpInterfaceHistoryIpAddr IP address of the interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.85.9.1.1.3
rcKhiIpInterfaceHistoryVlanId Vlan id of the IP interface.	Integer32	.1.3.6.1.4.1.2272.1.85.9.1.1.4
rcKhiIpInterfaceHistoryEvent Indicates whether the interface went up or down.	Enumeration	.1.3.6.1.4.1.2272.1.85.9.1.1.5

rcKhiSlotPerfTable

table

.1.3.6.1.4.1.2272.1.85.10.1 · 1 row entry · 25 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiSlotPerfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiSlotPerfTable'

Copy

Slot Performance Information

rcKhiSlotPerfEntry row .1.3.6.1.4.1.2272.1.85.10.1.1

Slot Performance Entry

Indexes

rcKhiForwardingCbZagrosIndex

Column	Syntax	OID
rcKhiSlotIndex An unique index used to identify the slot	Integer32 Constraints: range: 1-60	.1.3.6.1.4.1.2272.1.85.10.1.1.1
rcKhiSlotCpuCurrentUtil Percentage CPU utilization under current operating conditions.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.2
rcKhiSlotCpu5MinAve Average percentage CPU utilization over the past 5 minutes.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.3
rcKhiSlotCpu5MinHi Hi watermark for percentage CPU utilization over the past 5 minutes.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.4
rcKhiSlotCpu5MinHiTime Last time of at which rcKhiSlotCpu5MinHi sampling occured.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.10.1.1.5
rcKhiSlotMemUsed The amount of DRAM memory consumed in KB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.6
rcKhiSlotMemFree The amount of DRAM memory available in KB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.7
rcKhiSlotMemUtil Current percentage of memory utilization.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.8
rcKhiSlotMem5MinAve Average percentage of memory utilization over the past 5 minutes.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.9
rcKhiSlotMem5MinHi High watermark for percentage memory utilization over the past 5 minutes.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.10
rcKhiSlotMem5MinHiTime The last time memory information was registered.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.10.1.1.11
rcKhiSlotUsedFbuf The number of Fbufs in use.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.12
rcKhiSlotFreeFbuf The number of Fbufs available.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.13
rcKhiSlotNoFbuf The number of times when running out of Fbuff	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.14
rcKhiSlotNetStackSysFreeMbuf The number of network stack system Mbufs available.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.15
rcKhiSlotNetStackDataFreeMbuf The number of network stack data Mbufs available.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.16
rcKhiSlotNetStackSysUsedMbuf The number of network stack system Mbufs in use.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.17
rcKhiSlotNetStackDataUsedMbuf The number of network stack data Mbufs in use.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.18
rcKhiSlotNetStackSysSocketMbuf The number of network stack system sockets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.19
rcKhiSlotQHigh The highest number of queue entries consumed for system messaging.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.20
rcKhiSlotQNormal The current number of queue entries consumed for system messaging.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.21
rcKhiSlotFreeQEntries The current available number of queue entries for system messaging.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.1.1.22
rcKhiSlotCpu1MinAve Average percentage CPU utilization over the past 1 minute.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.23
rcKhiSlotCpu1MinHi Hi watermark for percentage CPU utilization over the past 1 minute.	Integer32	.1.3.6.1.4.1.2272.1.85.10.1.1.24
rcKhiSlotCpu1MinHiTime Last time at which rcKhiSlotCpu1MinHi sampling occured.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.10.1.1.25

rcKhiSlotProcessTable

table

.1.3.6.1.4.1.2272.1.85.10.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiSlotProcessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiSlotProcessTable'

Copy

CP Process Information

rcKhiSlotProcessEntry row .1.3.6.1.4.1.2272.1.85.10.2.1

Slot Process Entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiSlotProcessId Process ID	Integer32	.1.3.6.1.4.1.2272.1.85.10.2.1.1
rcKhiSlotProcessParentId Parent Process ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.2
rcKhiSlotProcessName Name of the process running	OctetString	.1.3.6.1.4.1.2272.1.85.10.2.1.3
rcKhiSlotProcessVmSize The size of the virtual memory allocated to the process	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.4
rcKhiSlotProcessVmLck The amount of locked memory	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.5
rcKhiSlotProcessVmRss The amount of memory mapped in RAM ( instead of swapped out)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.6
rcKhiSlotProcessVmData The size of the Data segment	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.7
rcKhiSlotProcessVmStk The stack size	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.8
rcKhiSlotProcessVmExe The size of the executable segment	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.9
rcKhiSlotProcessVmLib The size of the library code	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.85.10.2.1.10

rcKhiSlotPThreadTable

table

.1.3.6.1.4.1.2272.1.85.10.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiSlotPThreadTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiSlotPThreadTable'

Copy

Slot pthread information

rcKhiSlotPThreadEntry row .1.3.6.1.4.1.2272.1.85.10.3.1

Slot pthread entry

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiSlotPThreadTaskId Task ID	Integer32	.1.3.6.1.4.1.2272.1.85.10.3.1.1
rcKhiSlotPThreadName Name of the process running	OctetString	.1.3.6.1.4.1.2272.1.85.10.3.1.2
rcKhiSlotPThreadCpuCurrentUtil Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent.	Integer32	.1.3.6.1.4.1.2272.1.85.10.3.1.3
rcKhiSlotPThreadCpu5MinAve Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent.	Integer32	.1.3.6.1.4.1.2272.1.85.10.3.1.4
rcKhiSlotPThreadCpu5MinHi Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent.	Integer32	.1.3.6.1.4.1.2272.1.85.10.3.1.5
rcKhiSlotPthread5MinHiTime Last time at which sampling occured.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.85.10.3.1.6

rcKhiForwardingCbIfTable

table

.1.3.6.1.4.1.2272.1.85.11.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbIfTable'

Copy

Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbIfEntry row .1.3.6.1.4.1.2272.1.85.11.1.1

Forwarding Interface KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbIfIndex Interface index for CB's KHI Forwarding data. Indicies are essentially port based.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.85.11.1.1.1
rcKhiForwardingCbIfRxOk Receieve OK Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.2
rcKhiForwardingCbIfTxOk Transmit OK Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.3
rcKhiForwardingCbIfRxErr Receive Error Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.4
rcKhiForwardingCbIfTxErr Transmit Error Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.5
rcKhiForwardingCbIfRdbgc0 RDBGC0 Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.6
rcKhiForwardingCbIfRdbgc0Mask RDBGC0 Mask	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.7
rcKhiForwardingCbIfTdbgc0 TDBGC0 Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.8
rcKhiForwardingCbIfTdbgc0Mask TDBGC0 Mask	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.9
rcKhiForwardingCbIfK2IpmcDrops IP Multicast Drops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.1.1.10

rcKhiForwardingCbMachigigTable

table

.1.3.6.1.4.1.2272.1.85.11.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbMachigigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbMachigigTable'

Copy

Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbMachigigEntry row .1.3.6.1.4.1.2272.1.85.11.2.1

Forwarding Mac-Higig KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbMachigigIndex Index for CB's Forwarding MAc-Higig Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used.	Integer32	.1.3.6.1.4.1.2272.1.85.11.2.1.1
rcKhiForwardingCbMachigigMacK2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.2
rcKhiForwardingCbMachigigMacK2Mac	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.3
rcKhiForwardingCbMachigigRDGBC0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.4
rcKhiForwardingCbMachigigRDGBC0mask	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.5
rcKhiForwardingCbMachigigTDGBC0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.6
rcKhiForwardingCbMachigigTDGBC0mask	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.7
rcKhiForwardingCbMachigigIFPDOSDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.2.1.8

rcKhiForwardingCbK2Table

table

.1.3.6.1.4.1.2272.1.85.11.3 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbK2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbK2Table'

Copy

Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbK2Entry row .1.3.6.1.4.1.2272.1.85.11.3.1

Forwarding K2 KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbK2Index Index for CB's Forwarding K2 Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used.	Integer32	.1.3.6.1.4.1.2272.1.85.11.3.1.1
rcKhiForwardingCbK2MacK2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.2
rcKhiForwardingCbK2Zagros	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.3
rcKhiForwardingCbK2ZagrosK2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.4
rcKhiForwardingCbK2Mac	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.5
rcKhiForwardingCbK2MacK2Err	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.6
rcKhiForwardingCbK2ZagrosErr	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.7
rcKhiForwardingCbK2ZagrosK2Err	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.8
rcKhiForwardingCbK2MacErr	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.3.1.9

rcKhiForwardingCbZagrosTable

table

.1.3.6.1.4.1.2272.1.85.11.4 · 1 row entry · 106 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbZagrosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbZagrosTable'

Copy

Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbZagrosEntry row .1.3.6.1.4.1.2272.1.85.11.4.1

Zagros Forwarding KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbZagrosIndex Index for CB's Forwarding Zagros Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used.	Integer32	.1.3.6.1.4.1.2272.1.85.11.4.1.1
rcKhiForwardingCbZagrosK2Zagros	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.2
rcKhiForwardingCbZagrosRsp	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.3
rcKhiForwardingCbZagrosQe	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.4
rcKhiForwardingCbZagrosQeZagros	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.5
rcKhiForwardingCbZagrosK2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.6
rcKhiForwardingCbZagrosPmmPoolLo	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.7
rcKhiForwardingCbZagrosPmmPoolHigh	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.8
rcKhiForwardingCbZagrosPmmRspDropCounters	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.9
rcKhiForwardingCbZagrosPmmoutputDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.10
rcKhiForwardingCbZagrosPmmAdmissionRspDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.11
rcKhiForwardingCbZagrosPmmAdmissionErrDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.12
rcKhiForwardingCbZagrosPmmPool1Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.13
rcKhiForwardingCbZagrosPmmPool2Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.14
rcKhiForwardingCbZagrosPmmPool3Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.15
rcKhiForwardingCbZagrosPmmPool4Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.16
rcKhiForwardingCbZagrosPmmPool5Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.17
rcKhiForwardingCbZagrosPmmPool6Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.18
rcKhiForwardingCbZagrosPmmPool7Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.19
rcKhiForwardingCbZagrosPmmPool8Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.20
rcKhiForwardingCbZagrosPmmPool9Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.21
rcKhiForwardingCbZagrosPmmPool10Drop	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.22
rcKhiForwardingCbZagrosHbeCommandDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.23
rcKhiForwardingCbZagrosTcamSearchError	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.24
rcKhiForwardingCbZagrosEhpAllPortDownIstCounter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.25
rcKhiForwardingCbZagrosEhpAllPortDownMltCounter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.26
rcKhiForwardingCbZagrosEhpErrorDropCounter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.27
rcKhiForwardingCbZagrosIgrFilterDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.28
rcKhiForwardingCbZagrosZapTxCtl	SNMPv2-SMICounter64 Constraints: range: 1-60	.1.3.6.1.4.1.2272.1.85.11.4.1.29
rcKhiForwardingCbZagrosZapTxDat	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.30
rcKhiForwardingCbZagrosZapRxCtl	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.31
rcKhiForwardingCbZagrosZapRxDat	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.32
rcKhiForwardingCbZagrosZapTxHbe	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.33
rcKhiForwardingCbZagrosTcamSearchVal	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.34
rcKhiForwardingCbZagrosEmbDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.35
rcKhiForwardingCbZagrosEhpFilterDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.36
rcKhiForwardingCbZagrosEgrIpmcDropCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.37
rcKhiForwardingCbZagrosEgressEsb1Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.38
rcKhiForwardingCbZagrosEgressEsb2Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.39
rcKhiForwardingCbZagrosEgressEsb3Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.40
rcKhiForwardingCbZagrosEgressEsb4Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.41
rcKhiForwardingCbZagrosEgressEsb5Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.42
rcKhiForwardingCbZagrosEgressEsb6Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.43
rcKhiForwardingCbZagrosRspRx	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.44
rcKhiForwardingCbZagrosOpTx	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.45
rcKhiForwardingCbZagrosRspTx	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.46
rcKhiForwardingCbZagrosCifRqCount	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.47
rcKhiForwardingCbZagrosCifRsCounter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.48
rcKhiForwardingCbZagrosPage1Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.49
rcKhiForwardingCbZagrosPage2Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.50
rcKhiForwardingCbZagrosPage3Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.51
rcKhiForwardingCbZagrosPage4Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.52
rcKhiForwardingCbZagrosPage5Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.53
rcKhiForwardingCbZagrosPage6Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.54
rcKhiForwardingCbZagrosPage7Countobsolete	SNMPv2-SMICounter64 Constraints: range: 1-60	.1.3.6.1.4.1.2272.1.85.11.4.1.55
rcKhiForwardingCbZagrosPage8Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.56
rcKhiForwardingCbZagrosPage9Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.57
rcKhiForwardingCbZagrosPage10Countobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.58
rcKhiForwardingCbZagrosShPpobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.59
rcKhiForwardingCbZagrosFpCountsobsolete	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.60
rcKhiForwardingCbZagrosRspPlcThresholdReg	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.61
rcKhiForwardingCbZagrosRePlc	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.62
rcKhiForwardingCbZagrosNumPools	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.4.1.63
rcKhiForwardingCbZagrosFpCntOPA Free page counter for OPA(Output Packet Assembler)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.64
rcKhiForwardingCbZagrosFpCntRPA Free page counter for RPA(RSP Packet Assembler)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.65
rcKhiForwardingCbZagrosFpCntFPM Free page counter for FPM(Free Page Manager)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.66
rcKhiForwardingCbZagrosRspPlcPktCntPeak RSP PLC Peak Packet Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.67
rcKhiForwardingCbZagrosRspPlcPktCntCurr RSP PLC Current Packet Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.68
rcKhiForwardingCbZagrosRePlcPktCntPeak RE PLC(Replica Engine Packet Limit Count)Peak Packet Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.69
rcKhiForwardingCbZagrosRePlcPktCntCurr RE PLC Current Packet Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.70
rcKhiForwardingCbZagrosShPpPeak PMM shared pool Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.71
rcKhiForwardingCbZagrosShPpCurr PMM shared pool Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.72
rcKhiForwardingCbZagrosEgressMultiCastPeak PMM EgressMultiCast Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.73
rcKhiForwardingCbZagrosEgressMultiCastCurr PMM EgressMultiCast Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.74
rcKhiForwardingCbZagrosEgressOOBPeak PMM EgressOOB(Out Of Band) Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.75
rcKhiForwardingCbZagrosEgressOOBCurr PMM EgressOOB Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.76
rcKhiForwardingCbZagrosIngressHeartbeatPeak PMM IngressHeartbeat Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.77
rcKhiForwardingCbZagrosIngressHeartbeatCurr PMM IngressHeartbeat Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.78
rcKhiForwardingCbZagrosIngressCOPInsertPeak PMM IngressCOPInsert Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.79
rcKhiForwardingCbZagrosIngressCOPInsertCurr PMM IngressCOPInsert Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.80
rcKhiForwardingCbZagrosIngressEfCtlPeak PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.81
rcKhiForwardingCbZagrosIngressEfCtlCurr PMM Ingress EF/CTL Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.82
rcKhiForwardingCbZagrosIngressAfBePeak PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.83
rcKhiForwardingCbZagrosIngressAfBeCurr PMM Ingress AF/BE Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.84
rcKhiForwardingCbZagrosEgressL2BcUcPeak PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.85
rcKhiForwardingCbZagrosEgressL2BcUcCurr PMM Egress L2BC/UC Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.86
rcKhiForwardingCbZagrosEgressMirrorPeak PMM Egress Mirror Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.87
rcKhiForwardingCbZagrosEgressMirrorCurr PMM Egress Mirror Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.88
rcKhiForwardingCbZagrosPool9Peak PMM Pool9 Peak Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.89
rcKhiForwardingCbZagrosPool9Curr PMM Pool9 Current Value	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.90
rcKhiForwardingCbZagrosPmmFpPlenErr PMM FP PLEN Error Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.91
rcKhiForwardingCbZagrosEFSInternalError0 EFS Internal Error 0 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.92
rcKhiForwardingCbZagrosEFSInternalError1 EFS Internal Error 1 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.93
rcKhiForwardingCbZagrosEFSInternalError2 EFS Internal Error 2 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.94
rcKhiForwardingCbZagrosEFSInternalError3 EFS Internal Error 3 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.95
rcKhiForwardingCbZagrosEFSInternalError4 EFS Internal Error 4 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.96
rcKhiForwardingCbZagrosEFSInternalError5 EFS Internal Error 5 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.97
rcKhiForwardingCbZagrosEFSInternalError6 EFS Internal Error 6 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.98
rcKhiForwardingCbZagrosEFSInternalError7 EFS Internal Error 7 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.99
rcKhiForwardingCbZagrosEFSInternalError8 EFS Internal Error 8 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.100
rcKhiForwardingCbZagrosEFSInternalError9 EFS Internal Error 9 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.101
rcKhiForwardingCbZagrosEFSInternalError10 EFS Internal Error 10 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.102
rcKhiForwardingCbZagrosEFSInternalError11 EFS Internal Error 11 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.103
rcKhiForwardingCbZagrosEFSInternalError12 EFS Internal Error 12 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.104
rcKhiForwardingCbZagrosEFSInternalError13 EFS Internal Error 13 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.105
rcKhiForwardingCbZagrosEFSInternalError14 EFS Internal Error 14 Count	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.4.1.106

rcKhiForwardingCbRspTable

table

.1.3.6.1.4.1.2272.1.85.11.5 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbRspTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbRspTable'

Copy

Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbRspEntry row .1.3.6.1.4.1.2272.1.85.11.5.1

Forwarding Rsp KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbRspIndex Index for CB's Forwarding Rsp Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used.	Integer32	.1.3.6.1.4.1.2272.1.85.11.5.1.1
rcKhiForwardingCbRspLsmDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.2
rcKhiForwardingCbRspExceptionDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.3
rcKhiForwardingCbRspFrameErrorDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.4
rcKhiForwardingCbRspFdibFullDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.5
rcKhiForwardingCbRspIngrMltAllPortDown	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.6
rcKhiForwardingCbRspEgressMltAllPortDownDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.7
rcKhiForwardingCbRspEgressIpMcastRecordsNotFound	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.8
rcKhiForwardingCbRspEgressIpMcastMltWrongPort	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.9
rcKhiForwardingCbRspEgressIpMcastSourceKnockout	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.10
rcKhiForwardingCbRspIngressDaNotFoundDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.11
rcKhiForwardingCbRspIngressUnknown	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.12
rcKhiForwardingCbRspIngressDiscardDestIdDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.13
rcKhiForwardingCbRspMacLearningPacketDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.14
rcKhiForwardingCbRspIngrMltAllPortsDown	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.15
rcKhiForwardingCbRspIngressIpmcSupressionDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.16
rcKhiForwardingCbRspUnsupportedFeatureDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.17
rcKhiForwardingCbRspAclDiscards	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.18
rcKhiForwardingCbRspIngressIpmcLookupFails	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.19
rcKhiForwardingCbRspIpv4DestIpLookupFails	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.20
rcKhiForwardingCbRspIpv4SourceIpLookupFails	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.21
rcKhiForwardingCbRspL3MirrorDrops	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.22
rcKhiForwardingCbRspIpV6LookupFails	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.23
rcKhiForwardingCbRspIpV6TunnelLookupV4Fails	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.5.1.24

rcKhiForwardingCbQeTable

table

.1.3.6.1.4.1.2272.1.85.11.6 · 1 row entry · 95 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingCbQeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingCbQeTable'

Copy

Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data.

rcKhiForwardingCbQeEntry row .1.3.6.1.4.1.2272.1.85.11.6.1

Forwarding Qe KHI - Cobalt Blue table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingCbQeIndex Index for CB's Forwarding Qe Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all indicies may be used.	Integer32	.1.3.6.1.4.1.2272.1.85.11.6.1.1
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.2
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.3
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.4
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.5
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.6
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.7
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.8
rcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.9
rcKhiForwardingCbQeIngressPmSwitchPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.10
rcKhiForwardingCbQeIngressPmLocalPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.11
rcKhiForwardingCbQeIngressPmSwitchTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.12
rcKhiForwardingCbQeIngressPmLocalTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.13
rcKhiForwardingCbQeIngressSr0RxP0PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.14
rcKhiForwardingCbQeIngressSr1RxP0PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.15
rcKhiForwardingCbQeIngressSr0RxP1PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.16
rcKhiForwardingCbQeIngressSr1RxP1PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.17
rcKhiForwardingCbQeIngressSr0RxP2PktCnt	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.6.1.18
rcKhiForwardingCbQeIngressSr1RxP2PktCnt	SNMPv2-SMICounter64 Constraints: range: 3-500	.1.3.6.1.4.1.2272.1.85.11.6.1.19
rcKhiForwardingCbQeIngressSr0RxP3PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.85.11.6.1.20
rcKhiForwardingCbQeIngressSr1RxP3PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.21
rcKhiForwardingCbQeIngressSr0RxP4PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.22
rcKhiForwardingCbQeIngressSr1RxP4PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.23
rcKhiForwardingCbQeIngressSr0RxP5PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.24
rcKhiForwardingCbQeIngressSr1RxP5PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.25
rcKhiForwardingCbQeIngressSr0RxP6PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.26
rcKhiForwardingCbQeIngressSr1RxP6PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.27
rcKhiForwardingCbQeIngressSr0RxP7PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.28
rcKhiForwardingCbQeIngressSr1RxP7PktCnt	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.6.1.29
rcKhiForwardingCbQeIngressSr0RxP8PktCnt	SNMPv2-SMICounter64 Enumerated Values: 1 ifpPcv 2 ifpPcvMacInMacTagged 3 ifpPcvMacInMacUntagged Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.30
rcKhiForwardingCbQeIngressSr1RxP8PktCnt	SNMPv2-SMICounter64 Constraints: range: 3-500	.1.3.6.1.4.1.2272.1.85.11.6.1.31
rcKhiForwardingCbQeIngressSr0RxP9PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.85.11.6.1.32
rcKhiForwardingCbQeIngressSr1RxP9PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.33
rcKhiForwardingCbQeIngressSr0RxP10PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.34
rcKhiForwardingCbQeIngressSr1RxP10PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.35
rcKhiForwardingCbQeIngressSr0RxP11PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.36
rcKhiForwardingCbQeIngressSr1RxP11PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.6.1.37
rcKhiForwardingCbQeIngressSr0RxP12PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.38
rcKhiForwardingCbQeIngressSr1RxP12PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.39
rcKhiForwardingCbQeIngressSr0RxP13PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.40
rcKhiForwardingCbQeIngressSr1RxP13PktCnt	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.6.1.41
rcKhiForwardingCbQeIngressSr0RxP14PktCnt	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.6.1.42
rcKhiForwardingCbQeIngressSr1RxP14PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.43
rcKhiForwardingCbQeIngressSr0RxP15PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.44
rcKhiForwardingCbQeIngressSr1RxP15PktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.45
rcKhiForwardingCbQeIngressSr0RxTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.46
rcKhiForwardingCbQeIngressSr1RxTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.47
rcKhiForwardingCbQeIngressRbIdp0RequestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.48
rcKhiForwardingCbQeIngressRbIdp1RequestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.49
rcKhiForwardingCbQeIngressRbIdp2RequestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.50
rcKhiForwardingCbQeIngressRbIdp3RequestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.51
rcKhiForwardingCbQeIngressRbIdp4RequestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.52
rcKhiForwardingCbQeIngressRbEnqrespPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.53
rcKhiForwardingCbQeEgressSvPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.54
rcKhiForwardingCbQeEgressSt0P0TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.55
rcKhiForwardingCbQeEgressSt1P0TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.56
rcKhiForwardingCbQeEgressSt0P1TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.57
rcKhiForwardingCbQeEgressSt1P1TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.58
rcKhiForwardingCbQeEgressSt0P2TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.59
rcKhiForwardingCbQeEgressSt1P2TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.60
rcKhiForwardingCbQeEgressSt0P3TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.61
rcKhiForwardingCbQeEgressSt1P3TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.62
rcKhiForwardingCbQeEgressSt0P4TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.63
rcKhiForwardingCbQeEgressSt1P4TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.64
rcKhiForwardingCbQeEgressSt0P5TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.65
rcKhiForwardingCbQeEgressSt1P5TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.66
rcKhiForwardingCbQeEgressSt0P6TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.67
rcKhiForwardingCbQeEgressSt1P6TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.68
rcKhiForwardingCbQeEgressSt0P7TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.69
rcKhiForwardingCbQeEgressSt1P7TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.70
rcKhiForwardingCbQeEgressSt0P8TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.71
rcKhiForwardingCbQeEgressSt1P8TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.72
rcKhiForwardingCbQeEgressSt0P9TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.73
rcKhiForwardingCbQeEgressSt1P9TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.74
rcKhiForwardingCbQeEgressSt0P10TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.75
rcKhiForwardingCbQeEgressSt1P10TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.76
rcKhiForwardingCbQeEgressSt0P11TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.77
rcKhiForwardingCbQeEgressSt1P11TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.78
rcKhiForwardingCbQeEgressSt0P12TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.79
rcKhiForwardingCbQeEgressSt1P12TxPktCnt	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.6.1.80
rcKhiForwardingCbQeEgressSt0P13TxPktCnt	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.6.1.81
rcKhiForwardingCbQeEgressSt1P13TxPktCnt	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.6.1.82
rcKhiForwardingCbQeEgressSt0P14TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.83
rcKhiForwardingCbQeEgressSt1P14TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.84
rcKhiForwardingCbQeEgressSt0P15TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.85
rcKhiForwardingCbQeEgressSt1P15TxPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.86
rcKhiForwardingCbQeEgressSt0TxTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.87
rcKhiForwardingCbQeEgressSt1TxTestPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.88
rcKhiForwardingCbQeSvPartialPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.89
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.90
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.91
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.92
rcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.93
rcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.94
rcKhiForwardingCbQeQmError1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.6.1.95

rcKhiForwardingIfpTable

table deprecated

.1.3.6.1.4.1.2272.1.85.11.7 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingIfpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingIfpTable'

Copy

Forwarding Ifp Key Health Indicator MIB - All VSP Data.

rcKhiForwardingIfpEntry row .1.3.6.1.4.1.2272.1.85.11.7.1

Forwarding Ifp KHI - VSP table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingIfpSlotdeprecated Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.7.1.1
rcKhiForwardingIfpIndexdeprecated Index of the IFP Rule	Integer32	.1.3.6.1.4.1.2272.1.85.11.7.1.2
rcKhiForwardingIfpNamedeprecated Name of the IFP Rule	OctetString	.1.3.6.1.4.1.2272.1.85.11.7.1.3
rcKhiForwardingIfpSlice0Portsdeprecated Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type	OctetString	.1.3.6.1.4.1.2272.1.85.11.7.1.4
rcKhiForwardingIfpSlice0Cntdeprecated Counter for slice 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.7.1.5
rcKhiForwardingIfpSlice1Portsdeprecated Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type	OctetString	.1.3.6.1.4.1.2272.1.85.11.7.1.6
rcKhiForwardingIfpSlice1Cntdeprecated Counter for slice 1	SNMPv2-SMICounter32 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.7.1.7
rcKhiForwardingIfpSlice2Portsdeprecated Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.7.1.8
rcKhiForwardingIfpSlice2Cntdeprecated Counter for slice 2	SNMPv2-SMICounter32 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.7.1.9

rcKhiForwardingIfpNewTable

table

.1.3.6.1.4.1.2272.1.85.11.8 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingIfpNewTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingIfpNewTable'

Copy

Forwarding Ifp New Key Health Indicator MIB.
This table replaces the old table
rcKhiForwardingIfpTable

rcKhiForwardingIfpNewEntry row .1.3.6.1.4.1.2272.1.85.11.8.1

Forwarding Ifp KHI - VSP table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingIfpNewSlot Slot Number	Integer32 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.85.11.8.1.1
rcKhiForwardingIfpNewTblType Type of table IFP PCV for both 1G and 10G cards. IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card	Enumeration Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.85.11.8.1.2
rcKhiForwardingIfpNewIndex Index of the IFP Rule	Integer32	.1.3.6.1.4.1.2272.1.85.11.8.1.3
rcKhiForwardingIfpNewName Name of the IFP Rule	OctetString	.1.3.6.1.4.1.2272.1.85.11.8.1.4
rcKhiForwardingIfpNewSlice0Ports Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type	OctetString	.1.3.6.1.4.1.2272.1.85.11.8.1.5
rcKhiForwardingIfpNewSlice0Cnt Counter for slice 0	SNMPv2-SMICounter32 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.8.1.6
rcKhiForwardingIfpNewSlice1Ports Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.8.1.7
rcKhiForwardingIfpNewSlice1Cnt Counter for slice 1	SNMPv2-SMICounter32 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.8.1.8
rcKhiForwardingIfpNewSlice2Ports Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type	OctetString	.1.3.6.1.4.1.2272.1.85.11.8.1.9
rcKhiForwardingIfpNewSlice2Cnt Counter for slice 2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.8.1.10

rcKhiForwardingRofQeTable

table

.1.3.6.1.4.1.2272.1.85.11.9 · 1 row entry · 37 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofQeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofQeTable'

Copy

Forwarding Qe Key Health Indicator MIB for RoF.

rcKhiForwardingRofQeEntry row .1.3.6.1.4.1.2272.1.85.11.9.1

Forwarding Qe KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofQeSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.9.1.1
rcKhiForwardingRofQeSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.9.1.2
rcKhiForwardingRofHg0RxPkts pkts received via HiGig0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.3
rcKhiForwardingRofHg1RxPkts pkts received via HiGig1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.4
rcKhiForwardingRofHg2RxPkts pkts received via HiGig2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.5
rcKhiForwardingRofHg3RxPkts pkts received via HiGig3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.6
rcKhiForwardingRofHg0TxPkts pkts transmitted via HiGig0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.7
rcKhiForwardingRofHg1TxPkts pkts transmitted via HiGig1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.8
rcKhiForwardingRofHg2TxPkts pkts transmitted via HiGig2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.9
rcKhiForwardingRofHg3TxPkts pkts transmitted via HiGig3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.10
rcKhiForwardingRofRbIF1DropCnt pkts dropped on IF1 (HG0)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.11
rcKhiForwardingRofRbIF2DropCnt pkts dropped on IF1 (HG1)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.12
rcKhiForwardingRofRbIF3DropCnt pkts dropped on IF1 (HG2)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.13
rcKhiForwardingRofRbIF4DropCnt pkts dropped on IF1 (HG3)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.14
rcKhiForwardingRofFdPktDropCount pkts dropped in FDM block	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.15
rcKhiForwardingRofFrRxPktschannelA pkts received from fabric via channel A	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.16
rcKhiForwardingRofFrRxPktschannelB pkts received from fabric via channel B	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.17
rcKhiForwardingRofNumDP0PktsAccepted DP0 pkts accepted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.18
rcKhiForwardingRofNumDP1PktsAccepted DP1 pkts accepted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.19
rcKhiForwardingRofNumDP2PktsAccepted DP2 pkts accepted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.20
rcKhiForwardingRofNumDP3PktsAccepted DP3 pkts accepted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.21
rcKhiForwardingRofNumDP0PktsDroppedDueToWRED DP0 pkts dropped due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.22
rcKhiForwardingRofNumDP1PktsDroppedDueToWRED DP1 pkts dropped due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.23
rcKhiForwardingRofNumDP2PktsDroppedDueToWRED DP2 pkts dropped due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.24
rcKhiForwardingRofNumDP3PktsDroppedDueToWRED DP3 pkts dropped due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.25
rcKhiForwardingRofNumDP0PktsMarkedDueToWRED DP0 pkts marked due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.26
rcKhiForwardingRofNumDP1PktsMarkedDueToWRED DP1 pkts marked due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.27
rcKhiForwardingRofNumDP2PktsMarkedDueToWRED DP2 pkts marked due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.28
rcKhiForwardingRofNumDP3PktsMarkedDueToWRED DP3 pkts marked due to WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.29
rcKhiForwardingRofNumDP0PktsDroppedNonWRED DP0 pkts dropped non-WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.30
rcKhiForwardingRofNumDP1PktsDroppedNonWRED DP1 pkts dropped non-WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.31
rcKhiForwardingRofNumDP2PktsDroppedNonWRED DP2 pkts dropped non-WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.32
rcKhiForwardingRofNumDP3PktsDroppedNonWRED DP3 pkts dropped non-WRED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.33
rcKhiForwardingRofNumPktsDiscardedForBadQueNum pkts dropped due to bad queue num	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.34
rcKhiForwardingRofNumQueuesAgedOut queues deleted due age	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.35
rcKhiForwardingRofNumPktsDequeuedFromQM pkts QM dequeued	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.36
rcKhiForwardingRofNumHcfcMsgsDroppedDueToCRCerror msgs dropped due to CRC error	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.9.1.37

rcKhiForwardingRofIfpTable

table

.1.3.6.1.4.1.2272.1.85.11.10 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofIfpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofIfpTable'

Copy

KHI Forwarding IFP Drop Stats for RoF

rcKhiForwardingRofIfpEntry row .1.3.6.1.4.1.2272.1.85.11.10.1

KHI Forwarding IFP Drop Stats for RoF

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofIfpSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.10.1.1
rcKhiForwardingRofIfpSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.10.1.2
rcKhiForwardingRofIfpLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.10.1.3
rcKhiForwardingRofIfpMcRateLimitDrop MAC_RATE_LIMIT_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.4
rcKhiForwardingRofIfpBcRateLimitDrop BC_RATE_LIMIT_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.5
rcKhiForwardingRofIfpIpv6TcpMcDrop IPV6_TCP_MC_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.6
rcKhiForwardingRofIfpIpv4TcpMcDrop IPV4_TCP_MC_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.7
rcKhiForwardingRofIfpIfpDrop IFP_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.8
rcKhiForwardingRofIfpVlanMemDrop VLAN_MEM_DROP	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.10.1.9
rcKhiForwardingRofIfpBlacklistDrop BLACKLIST_DROP	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.10.1.10
rcKhiForwardingRofIfpIpv6SipLoopbackDrop IPV6_SIP_LOOPBACK_DROP	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.10.1.11
rcKhiForwardingRofIfpBadIpv4AddrDrop BAD_IPV4_ADDR_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.12
rcKhiForwardingRofIfpMacLoopbackDrop MAC_LOOPBACK_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.13
rcKhiForwardingRofIfp1dotPDrop 1DOTP_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.14
rcKhiForwardingRofIfpCfiDrop CFI_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.15
rcKhiForwardingRofIfpUntagDrop UNTAG_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.16
rcKhiForwardingRofIfpTagDrop TAG_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.17
rcKhiForwardingRofIfpIstFilterDrop IST_FILTER_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.18
rcKhiForwardingRofIfpIpVerDrop IP_VER_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.19
rcKhiForwardingRofIfpVid0Drop VID_0_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.20
rcKhiForwardingRofIfpUnsupportFrameDrop UNSUPPORTED_FRAME_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.21
rcKhiForwardingRofIfpIpv4MacTtl0Drop IPV4_MC_TTL0_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.10.1.22

rcKhiForwardingRofIfpForwTable

table

.1.3.6.1.4.1.2272.1.85.11.11 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofIfpForwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofIfpForwTable'

Copy

KHI Forwarding IFP Forwading Stats for RoF

rcKhiForwardingRofIfpForwEntry row .1.3.6.1.4.1.2272.1.85.11.11.1

KHI Forwarding IFP Forw Stats for RoF

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofIfpForwSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.11.1.1
rcKhiForwardingRofIfpForwSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.11.1.2
rcKhiForwardingRofIfpForwLane Lane Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.11.1.3
rcKhiForwardingRofIfpForwTblType Type of table IFP PT and IFP PCV for ROF cards	Enumeration	.1.3.6.1.4.1.2272.1.85.11.11.1.4
rcKhiForwardingRofIfpForwIndex Index of the IFP Rule	Integer32	.1.3.6.1.4.1.2272.1.85.11.11.1.5
rcKhiForwardingRofIfpForwName Name of the IFP Rule	OctetString	.1.3.6.1.4.1.2272.1.85.11.11.1.6
rcKhiForwardingRofIfpForwStatsPorts Range of Ports in slice of the slot. Display format will have Ports 0 or 1-8 /9-16/17-24 based on the card type	OctetString	.1.3.6.1.4.1.2272.1.85.11.11.1.7
rcKhiForwardingRofIfpForwStatsCnt Counter for slice 0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.11.1.8

rcKhiForwardingRofZagForwStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.12 · 1 row entry · 52 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofZagForwStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofZagForwStatsTable'

Copy

Forwarding Zagros Forwarding Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofZagForwStatsEntry row .1.3.6.1.4.1.2272.1.85.11.12.1

Forwarding Zagros Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofZagForwStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.12.1.1
rcKhiForwardingRofZagForwStatsSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.12.1.2
rcKhiForwardingRofZagForwStatsLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.12.1.3
rcKhiForwardingRofZagForwPmmDpRxCnt PMM_DP_RX_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.4
rcKhiForwardingRofZagForwPmmDpTxCnt PMM_DP_TX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.5
rcKhiForwardingRofZagForwPmmRspRxCnt PMM_RSP_RX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.6
rcKhiForwardingRofZagForwPmmRspTxCnt PMM_RSP_TX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.7
rcKhiForwardingRofZagForwPmmFp0RxCnt PMM_FP0_RX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.8
rcKhiForwardingRofZagForwPmmFp0TxCnt PMM_FP0_TX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.9
rcKhiForwardingRofZagForwPmmFp1RxCnt PMM_FP1_RX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.10
rcKhiForwardingRofZagForwPmmFp1TxCnt PMM_FP1_TX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.11
rcKhiForwardingRofZagForwPmmFlopTxCnt PMM_FLOP_TX_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.12
rcKhiForwardingRofZagForwPmmIngDataAdmitCnt PMM_INGRESS_DATA_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.13
rcKhiForwardingRofZagForwPmmIngScAdmitCnt PMM_INGRESS_SC_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.14
rcKhiForwardingRofZagForwPmmIngLsmAdmitCnt PMM_INGRESS_LSM_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.15
rcKhiForwardingRofZagForwPmmIngCopAdmitCnt PMM_INGRESS_COP_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.16
rcKhiForwardingRofZagForwPmmIngExpAdmitCnt PMM_INGRESS_EXPAND_ADMIT_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.17
rcKhiForwardingRofZagForwPmmEgrUcAdmitCnt PMM_EGRESS_UC_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.18
rcKhiForwardingRofZagForwPmmEgrScAdmitCnt PMM_EGRESS_SC_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.19
rcKhiForwardingRofZagForwPmmEgrMcRootAdmitCnt PMM_EGRESS_MC_ROOT_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.20
rcKhiForwardingRofZagForwPmmEgrOobAdmitCnt PMM_EGRESS_OOB_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.21
rcKhiForwardingRofZagForwPmmEgrExpandAdmitCnt PMM_EGRESS_EXPAND_ADMIT_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.22
rcKhiForwardingRofZagForwFpRxPacketcount0 FP_RX_PACKET_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.23
rcKhiForwardingRofZagForwFpRxPacketcount1 FP_RX_PACKET_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.24
rcKhiForwardingRofZagForwFpTxPacketCnt0 FP_TX_PACKET_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.25
rcKhiForwardingRofZagForwFpTxPacketCnt1 FP_TX_PACKET_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.26
rcKhiForwardingRofZagForwHabRxPackletCnt HAB_RX_PACKLET_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.27
rcKhiForwardingRofZagForwHabTxPackletCnt HAB_TX_PACKLET_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.28
rcKhiForwardingRofZagForwCifRxOperationCnt CIF_RX_OPERATION_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.29
rcKhiForwardingRofZagForwCifTxOperationCnt CIF_TX_OPERATION_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.30
rcKhiForwardingRofZagForwZpktRxOkCnt ZPKT_RX_OK_CNT	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.12.1.31
rcKhiForwardingRofZagForwZpktTxOkCnt ZPKT_TX_OK_CNT	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.12.1.32
rcKhiForwardingRofZagForwZipTxfragDatCnt ZIP_TXFRAG_DAT_CNT	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.12.1.33
rcKhiForwardingRofZagForwZipTxfragRspCnt ZIP_TXFRAG_RSP_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.34
rcKhiForwardingRofZagForwZipTxfragPcieCnt ZIP_TXFRAG_PCIE_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.35
rcKhiForwardingRofZagForwZipTxfragSephCnt ZIP_TXFRAG_SEPH_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.36
rcKhiForwardingRofZagForwZipTxfragSeplCnt ZIP_TXFRAG_SEPL_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.37
rcKhiForwardingRofZagForwZipRxfragDatOkCnt ZIP_RXFRAG_DAT_OK_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.38
rcKhiForwardingRofZagForwZipRxfragRspOkCnt ZIP_RXFRAG_RSP_OK_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.39
rcKhiForwardingRofZagForwZipRxfragPcieOkCnt ZIP_RXFRAG_PCIE_OK_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.40
rcKhiForwardingRofZagForwZipRxfragSephOkCnt ZIP_RXFRAG_SEPH_OK_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.41
rcKhiForwardingRofZagForwZipRxfragSeplOkCnt ZIP_RXFRAG_SEPL_OK_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.42
rcKhiForwardingRofZagForwPmmRspRxTestCount PMM_RSP_Rx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.43
rcKhiForwardingRofZagForwPmmRspTxTestCount PMM_RSP_Tx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.44
rcKhiForwardingRofZagForwPmmDPRxTestCount PMM_DP_Rx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.45
rcKhiForwardingRofZagForwPmmDPTxTestCount PMM_DP_Tx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.46
rcKhiForwardingRofZagForwPmmFP0RxTestCount PMM_FP0_Rx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.47
rcKhiForwardingRofZagForwPmmFP0TxTestCount PMM_FP0_Tx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.48
rcKhiForwardingRofZagForwPmmFP1RxTestCount PMM_FP1_Rx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.49
rcKhiForwardingRofZagForwPmmFP1TxTestCount PMM_FP1_Tx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.50
rcKhiForwardingRofZagForwPmmFlopTxTestCount PMM_FLOP_Tx_Test_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.51
rcKhiForwardingRofZagForwIhpPcCount IHP_PC_Count	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.12.1.52

rcKhiForwardingRofZagDropStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.13 · 1 row entry · 54 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofZagDropStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofZagDropStatsTable'

Copy

Forwarding Zagros Drop Stats - 1 Instance Registers -  Key Health Indicator MIB for RoF.

rcKhiForwardingRofZagDropStatsEntry row .1.3.6.1.4.1.2272.1.85.11.13.1

Forwarding Zagros Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofZagDropStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.13.1.1
rcKhiForwardingRofZagDropStatsSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.13.1.2
rcKhiForwardingRofZagDropStatsLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.13.1.3
rcKhiForwardingRofZagDropPmmRspCmdDropCnt PMM_RSP_CMD_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.4
rcKhiForwardingRofZagDropPmmFabricPort0FfeDropCnt PMM_FABRIC_PORT0_FFE_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.5
rcKhiForwardingRofZagDropPmmFabricPort1FfeDropCnt PMM_FABRIC_PORT1_FFE_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.6
rcKhiForwardingRofZagDropPmmPmCmdDropCnt PMM_PM_CMD_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.7
rcKhiForwardingRofZagDropPmmDpRxDropCnt PMM_DP_RX_DRP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.8
rcKhiForwardingRofZagDropPmmIngDataCtlDropCnt PMM_INGRESS_DATA_CTL_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.9
rcKhiForwardingRofZagDropPmmIngDataPort0DropCnt PMM_INGRESS_DATA_PORT0_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.10
rcKhiForwardingRofZagDropPmmIngDataPort1DropCnt PMM_INGRESS_DATA_PORT1_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.11
rcKhiForwardingRofZagDropPmmIngDataPort2DropCnt PMM_INGRESS_DATA_PORT2_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.12
rcKhiForwardingRofZagDropPmmIngDataPort3DropCnt PMM_INGRESS_DATA_PORT3_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.13
rcKhiForwardingRofZagDropPmmIngDataPort4DropCnt PMM_INGRESS_DATA_PORT4_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.14
rcKhiForwardingRofZagDropPmmIngDataPort5DropCnt PMM_INGRESS_DATA_PORT5_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.15
rcKhiForwardingRofZagDropPmmIngDataPort6DropCnt PMM_INGRESS_DATA_PORT6_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.16
rcKhiForwardingRofZagDropPmmIngDataPort7DropCnt PMM_INGRESS_DATA_PORT7_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.17
rcKhiForwardingRofZagDropPmmIngDataPort8DropCnt PMM_INGRESS_DATA_PORT8_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.18
rcKhiForwardingRofZagDropPmmIngDataPort9DropCnt PMM_INGRESS_DATA_PORT9_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.19
rcKhiForwardingRofZagDropPmmIngDataPort10DropCnt PMM_INGRESS_DATA_PORT10_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.20
rcKhiForwardingRofZagDropPmmIngDataPort11DropCnt PMM_INGRESS_DATA_PORT11_DROP_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.21
rcKhiForwardingRofZagDropPmmIngDataPort12DropCnt PMM_INGRESS_DATA_PORT12_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.22
rcKhiForwardingRofZagDropPmmIngDataPort13DropCnt PMM_INGRESS_DATA_PORT13_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.23
rcKhiForwardingRofZagDropPmmIngDataPort14DropCnt PMM_INGRESS_DATA_PORT14_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.24
rcKhiForwardingRofZagDropPmmIngDataPort15DropCnt PMM_INGRESS_DATA_PORT15_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.25
rcKhiForwardingRofZagDropPmmIngCopDropCnt PMM_INGRESS_COP_DROP_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.26
rcKhiForwardingRofZagDropPmmIngExpandDropCnt PMM_INGRESS_EXPAND_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.27
rcKhiForwardingRofZagDropPmmEgrUcDropCnt PMM_EGRESS_UC_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.28
rcKhiForwardingRofZagDropPmmEgrScDropCnt PMM_EGRESS_SC_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.29
rcKhiForwardingRofZagDropPmmEgrMcRootT0DropCnt PMM_EGRESS_MC_ROOT_T0_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.30
rcKhiForwardingRofZagDropPmmEgrMcRootT1DropCnt PMM_EGRESS_MC_ROOT_T1_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.31
rcKhiForwardingRofZagDropPmmEgrMcRootT2DropCnt PMM_EGRESS_MC_ROOT_T2_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.32
rcKhiForwardingRofZagDropPmmEgrMcRootT3DropCnt PMM_EGRESS_MC_ROOT_T3_DROP_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.33
rcKhiForwardingRofZagDropPmmEgrMcRootT4DropCnt PMM_EGRESS_MC_ROOT_T4_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.34
rcKhiForwardingRofZagDropPmmEgrMcRootT5DropCnt PMM_EGRESS_MC_ROOT_T5_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.35
rcKhiForwardingRofZagDropPmmEgrMcRootT6DropCnt PMM_EGRESS_MC_ROOT_T6_DROP_COUNT	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.13.1.36
rcKhiForwardingRofZagDropPmmEgrMcRootT7DropCnt PMM_EGRESS_MC_ROOT_T7_DROP_COUNT	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.13.1.37
rcKhiForwardingRofZagDropPmmEgrOobDropCnt PMM_EGRESS_OOB_DROP_COUNT	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.13.1.38
rcKhiForwardingRofZagDropPmmEgrExpandDropCnt PMM_EGRESS_EXPAND_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.39
rcKhiForwardingRofZagDropPmmMpvMpidDropCnt PMM_MPV_MPID_DROP_COUN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.40
rcKhiForwardingRofZagDropZfaInvalidGpidDropCnt ZFA_INVALID_GPID_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.41
rcKhiForwardingRofZagDropCifRxOperErrCnt CIF_RX_OPERATION_ERROR_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.42
rcKhiForwardingRofZagDropEhpStgDropCnt EHP_STG_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.43
rcKhiForwardingRofZagDropEhpNoRcvrDropCnt EHP_NO_RCVR_DROP_COUNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.44
rcKhiForwardingRofZagDropHcfcRxErrCnt HCFC_RX_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.45
rcKhiForwardingRofZagDropZipRxfragDatErrCnt ZIP_RXFRAG_DAT_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.46
rcKhiForwardingRofZagDropZiPRxfragRspErrCnt ZIP_RXFRAG_RSP_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.47
rcKhiForwardingRofZagDropZipRxfragPcieErrCnt ZIP_RXFRAG_PCIE_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.48
rcKhiForwardingRofZagDropZipRxfragSephErrCnt ZIP_RXFRAG_SEPH_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.49
rcKhiForwardingRofZagDropZipRxfragSeplErrCnt ZIP_RXFRAG_SEPL_ERR_CN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.50
rcKhiForwardingRofZagDropZipRxfragDropCnt ZIP_RXFRAG_DROP_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.51
rcKhiForwardingRofZagDropZipRxfragInvctlCnt ZIP_RXFRAG_INVCTL_CN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.52
rcKhiForwardingRofZagDropZpktRxErrCnt ZPKT_RX_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.53
rcKhiForwardingRofZagDropZpktTxErrCnt ZPKT_TX_ERR_CNT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.13.1.54

rcKhiForwardingRofZagDropExtendedStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.14 · 1 row entry · 57 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofZagDropExtendedStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofZagDropExtendedStatsTable'

Copy

Forwarding Zagros Drop Stats - Multiple Instance Registers -  Key Health Indicator MIB for RoF.

rcKhiForwardingRofZagDropExtendedStatsEntry row .1.3.6.1.4.1.2272.1.85.11.14.1

Forwarding Zagros Drop Extended Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofZagDropExtendedStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.14.1.1
rcKhiForwardingRofZagDropExtendedStatsSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.14.1.2
rcKhiForwardingRofZagDropExtendedStatsLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.14.1.3
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt0 FP_RX_PACKET_ERROR_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.4
rcKhiForwardingRofZagDropExtendedFpRxPacketErrCnt1 FP_RX_PACKET_ERROR_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.5
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt0 FP_TX_PACKET_ERROR_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.6
rcKhiForwardingRofZagDropExtendedFpTxPacketErrCnt1 FP_TX_PACKET_ERROR_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.7
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt0 FP_RX_JUNK_ERROR_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.8
rcKhiForwardingRofZagDropExtendedFpRxJunkErrCnt1 FP_RX_JUNK_ERROR_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.9
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt0 PMM_MPV_SKO_DROP_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.10
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt1 PMM_MPV_SKO_DROP_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.11
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt2 PMM_MPV_SKO_DROP_COUNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.12
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt3 PMM_MPV_SKO_DROP_COUNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.13
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt4 PMM_MPV_SKO_DROP_COUNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.14
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt5 PMM_MPV_SKO_DROP_COUNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.15
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt6 PMM_MPV_SKO_DROP_COUNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.16
rcKhiForwardingRofZagDropExtendedPmmMpvSkoDropCnt7 PMM_MPV_SKO_DROP_COUNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.17
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt0 PMM_MPV_MLT_DROP_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.18
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt1 PMM_MPV_MLT_DROP_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.19
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt2 PMM_MPV_MLT_DROP_COUNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.20
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt3 PMM_MPV_MLT_DROP_COUNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.21
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt4 PMM_MPV_MLT_DROP_COUNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.22
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt5 PMM_MPV_MLT_DROP_COUNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.23
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt6 PMM_MPV_MLT_DROP_COUNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.24
rcKhiForwardingRofZagDropExtendedPmmMpvMltDropCnt7 PMM_MPV_MLT_DROP_COUNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.25
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt0 PMM_MPV_FFE_DROP_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.26
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt1 PMM_MPV_FFE_DROP_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.27
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt2 PMM_MPV_FFE_DROP_COUNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.28
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt3 PMM_MPV_FFE_DROP_COUNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.29
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt4 PMM_MPV_FFE_DROP_COUNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.30
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt5 PMM_MPV_FFE_DROP_COUNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.31
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt6 PMM_MPV_FFE_DROP_COUNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.32
rcKhiForwardingRofZagDropExtendedPmmMpvFfeDropCnt7 PMM_MPV_FFE_DROP_COUNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.33
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt0 PMM_MPV_FFE_DROP_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.34
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt1 PMM_MPV_FFE_DROP_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.35
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt2 PMM_MPV_FFE_DROP_COUNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.36
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt3 PMM_MPV_FFE_DROP_COUNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.37
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt4 PMM_MPV_FFE_DROP_COUNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.38
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt5 PMM_MPV_FFE_DROP_COUNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.39
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt6 PMM_MPV_FFE_DROP_COUNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.40
rcKhiForwardingRofZagDropExtendedPmmMpvStgDropCnt7 PMM_MPV_FFE_DROP_COUNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.41
rcKhiForwardingRofZagDropExtendedTxbDropCnt0 TXB_DROP_CNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.42
rcKhiForwardingRofZagDropExtendedTxbDropCnt1 TXB_DROP_CNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.43
rcKhiForwardingRofZagDropExtendedTxbDropCnt2 TXB_DROP_CNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.44
rcKhiForwardingRofZagDropExtendedTxbDropCnt3 TXB_DROP_CNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.45
rcKhiForwardingRofZagDropExtendedTxbDropCnt4 TXB_DROP_CNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.46
rcKhiForwardingRofZagDropExtendedTxbDropCnt5 TXB_DROP_CNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.47
rcKhiForwardingRofZagDropExtendedTxbDropCnt6 TXB_DROP_CNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.48
rcKhiForwardingRofZagDropExtendedTxbDropCnt7 TXB_DROP_CNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.49
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt0 TXB_DISCARD_COUNT0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.50
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt1 TXB_DISCARD_COUNT1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.51
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt2 TXB_DISCARD_COUNT2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.52
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt3 TXB_DISCARD_COUNT3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.53
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt4 TXB_DISCARD_COUNT4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.54
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt5 TXB_DISCARD_COUNT5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.55
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt6 TXB_DISCARD_COUNT6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.56
rcKhiForwardingRofZagDropExtendedTxbDiscardCnt7 TXB_DISCARD_COUNT7	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.14.1.57

rcKhiForwardingRofZagStatusTable

table

.1.3.6.1.4.1.2272.1.85.11.15 · 1 row entry · 84 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofZagStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofZagStatusTable'

Copy

Forwarding Zagros Status Key Health Indicator MIB for RoF.

rcKhiForwardingRofZagStatusEntry row .1.3.6.1.4.1.2272.1.85.11.15.1

Forwarding Zagros Status KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofZagStatusSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.15.1.1
rcKhiForwardingRofZagStatusSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.15.1.2
rcKhiForwardingRofZagStatusLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.15.1.3
rcKhiForwardingRofZagZag2DeviceIdBuild ZAG2_DEVICE_ID_BUILD	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.4
rcKhiForwardingRofZagZag2Build ZAG2_BUILD	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.5
rcKhiForwardingRofZagZag2Status ZAG2_STATUS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.6
rcKhiForwardingRofZagZag2Interrupt ZAG2_INTERRUPT	SNMPv2-SMICounter32 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.15.1.7
rcKhiForwardingRofZagZipStatus ZIP_STATUS	SNMPv2-SMICounter32 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.15.1.8
rcKhiForwardingRofZagZipSbmStatus ZIP_SBM_STATUS	SNMPv2-SMICounter32 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.15.1.9
rcKhiForwardingRofZagCifStatus CIF_STATUS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.10
rcKhiForwardingRofZagDpStatus0 DP_STATUS0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.11
rcKhiForwardingRofZagDpStatus1 DP_STATUS1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.12
rcKhiForwardingRofZagDpStatus2 DP_STATUS2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.13
rcKhiForwardingRofZagDpStatus3 DP_STATUS3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.14
rcKhiForwardingRofZagDpStatus4 DP_STATUS4	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.15
rcKhiForwardingRofZagDpStatus5 DP_STATUS5	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.16
rcKhiForwardingRofZagDpStatus6 DP_STATUS6	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.17
rcKhiForwardingRofZagDpStatus7 DP_STATUS7	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.18
rcKhiForwardingRofZagDpInterrupt0 DP_INTERRUPT0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.19
rcKhiForwardingRofZagDpInterrupt1 DP_INTERRUPT1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.20
rcKhiForwardingRofZagDpInterrupt2 DP_INTERRUPT2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.21
rcKhiForwardingRofZagDpInterrupt3 DP_INTERRUPT3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.22
rcKhiForwardingRofZagDpInterrupt4 DP_INTERRUPT4	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.23
rcKhiForwardingRofZagDpInterrupt5 DP_INTERRUPT5	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.24
rcKhiForwardingRofZagDpInterrupt6 DP_INTERRUPT6	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.25
rcKhiForwardingRofZagDpInterrupt7 DP_INTERRUPT7	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.26
rcKhiForwardingRofZagFpStatus0 FP_STATUS0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.27
rcKhiForwardingRofZagFpStatus1 FP_STATUS1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.28
rcKhiForwardingRofZagHabStatus HAB_STATUS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.29
rcKhiForwardingRofZagPmmInterrupt PMM_INTERRUPT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.30
rcKhiForwardingRofZagPmmIngDataPageCnt PMM_INGRESS_DATA_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.31
rcKhiForwardingRofZagPmmIngDataPeakPageCnt PMM_INGRESS_DATA_PEAK_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.32
rcKhiForwardingRofZagPmmIngScPageCnt PMM_INGRESS_SC_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.33
rcKhiForwardingRofZagPmmIngScOrdinaryLmt PMM_INGRESS_SC_ORDINARY_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.34
rcKhiForwardingRofZagPmmIngScMaxLmt PMM_INGRESS_SC_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.35
rcKhiForwardingRofZagPmmIngLsmPageCnt PMM_INGRESS_LSM_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.36
rcKhiForwardingRofZagPmmIngLsmMaxLmt PMM_INGRESS_LSM_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.37
rcKhiForwardingRofZagPmmIngCopPageCnt PMM_INGRESS_COP_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.38
rcKhiForwardingRofZagPmmIngCopMaxLmt PMM_INGRESS_COP_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.39
rcKhiForwardingRofZagPmmIngExpandPageCnt PMM_INGRESS_EXPAND_PAGE_COUNT	SNMPv2-SMICounter32 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.15.1.40
rcKhiForwardingRofZagPmmIngExpandMaxLmt PMM_INGRESS_EXPAND_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.41
rcKhiForwardingRofZagPmmEgrUcPageCnt PMM_EGRESS_UC_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.42
rcKhiForwardingRofZagPmmEgrUcPeakPageCnt PMM_EGRESS_UC_PEAK_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.43
rcKhiForwardingRofZagPmmEgrUcMaxLmt PMM_EGRESS_UC_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.44
rcKhiForwardingRofZagPmmEgrScPageCnt PMM_EGRESS_SC_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.45
rcKhiForwardingRofZagPmmEgrScMaxLmt PMM_EGRESS_SC_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.46
rcKhiForwardingRofZagPmmEgrMcPageCnt PMM_EGRESS_MC_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.47
rcKhiForwardingRofZagPmmEgrMcPeakPageCnt PMM_EGRESS_MC_PEAK_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.48
rcKhiForwardingRofZagPmmEgrMcMpvRootLmt PMM_EGRESS_MC_MPV_ROOT_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.49
rcKhiForwardingRofZagPmmEgrMcMaxLmt PMM_EGRESS_MC_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.50
rcKhiForwardingRofZagPmmEgrOobPageCnt PMM_EGRESS_OOB_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.51
rcKhiForwardingRofZagPmmEgrOobMaxLmt PMM_EGRESS_OOB_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.52
rcKhiForwardingRofZagPmmEgrExpandPageCnt PMM_EGRESS_EXPAND_PAGE_COUNT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.53
rcKhiForwardingRofZagPmmEgrExpandMaxLmt PMM_EGRESS_EXPAND_MAX_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.54
rcKhiForwardingRofZagIdpStatus0 IDP_STATUS_0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.55
rcKhiForwardingRofZagIdpStatus1 IDP_STATUS_1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.56
rcKhiForwardingRofZagEhpStatus EHP_STATUS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.57
rcKhiForwardingRofZagEhpFifoStatus EHP_FIFO_STATUS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.58
rcKhiForwardingRofZagIhpCtlReg0 IHP_CTL_REG0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.59
rcKhiForwardingRofZagIhpStatReg0 IHP_STAT_REG0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.60
rcKhiForwardingRofZagIhpStatus1 IHP_STATUS_1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.61
rcKhiForwardingRofZagIhpCtlReg1 IHP_CTL_REG1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.62
rcKhiForwardingRofZagIhpGenCfgReg IHP_GEN_CFG_REG	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.63
rcKhiForwardingRofZagZfaFifoStatusReg ZFA_FIFO_STATUS_REG	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.64
rcKhiForwardingRofZagHbmEvents HBM_EVENTS	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.65
rcKhiForwardingRofZagHbmCreditCnt HBM_CREDIT_COUNTER	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.66
rcKhiForwardingRofZagLsmLinkState LSM_LINK_STATE	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.67
rcKhiForwardingRofZagLsmHwLinkState LSM_HW_LINK_STATE	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.68
rcKhiForwardingRofZagTxbDebug0 TXB_DEBUG0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.69
rcKhiForwardingRofZagTxbDebug1 TXB_DEBUG1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.70
rcKhiForwardingRofZagTxbDebug2 TXB_DEBUG2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.71
rcKhiForwardingRofZagTxbDebug3 TXB_DEBUG3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.72
rcKhiForwardingRofZagTxbEvent TXB_EVENT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.73
rcKhiForwardingRofZagTxbUcfifoFull TXB_UC_FIFO_FULL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.74
rcKhiForwardingRofZagDpExtStatus0 DP_INTERRUPT0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.75
rcKhiForwardingRofZagDpExtStatus1 DP_INTERRUPT1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.76
rcKhiForwardingRofZagDpExtStatus2 DP_INTERRUPT2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.77
rcKhiForwardingRofZagDpExtStatus3 DP_INTERRUPT3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.78
rcKhiForwardingRofZagDpExtStatus4 DP_INTERRUPT4	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.79
rcKhiForwardingRofZagDpExtStatus5 DP_INTERRUPT5	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.80
rcKhiForwardingRofZagDpExtStatus6 DP_INTERRUPT6	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.81
rcKhiForwardingRofZagDpExtStatus7 DP_INTERRUPT7	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.82
rcKhiForwardingRofZagPmmEgrMcMccRootLmt PMM_EGRESS_MC_MCC_ROOT_LIMIT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.83
rcKhiForwardingRofZagTxbMcfifoFull TXB_MC_FIFO_FULL	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.15.1.84

rcKhiForwardingRofZagErrTable

table

.1.3.6.1.4.1.2272.1.85.11.16 · 1 row entry · 31 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofZagErrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofZagErrTable'

Copy

Forwarding Zagros Error Key Health Indicator MIB for RoF.

rcKhiForwardingRofZagErrEntry row .1.3.6.1.4.1.2272.1.85.11.16.1

Forwarding Zagros Error KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofZagErrSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.16.1.1
rcKhiForwardingRofZagErrSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.16.1.2
rcKhiForwardingRofZagErrLane Lane	Integer32	.1.3.6.1.4.1.2272.1.85.11.16.1.3
rcKhiForwardingRofZagPmmRspErr PMM_RSP_ERROR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.4
rcKhiForwardingRofZagPmmDpErr PMM_DP_ERROR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.5
rcKhiForwardingRofZagPmmFpErr PMM_FP_ERROR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.6
rcKhiForwardingRofZagPmmPmErr PMM_PM_ERROR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.7
rcKhiForwardingRofZagFpErr0 FP_ERROR0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.8
rcKhiForwardingRofZagFpErr1 FP_ERROR1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.9
rcKhiForwardingRofZagDpPortErr0 DP_PORT_ERROR0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.10
rcKhiForwardingRofZagDpPortErr1 DP_PORT_ERROR1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.11
rcKhiForwardingRofZagDpPortErr2 DP_PORT_ERROR2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.12
rcKhiForwardingRofZagDpPortErr3 DP_PORT_ERROR3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.13
rcKhiForwardingRofZagDpPortErr4 DP_PORT_ERROR4	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.14
rcKhiForwardingRofZagDpPortErr5 DP_PORT_ERROR5	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.15
rcKhiForwardingRofZagDpPortErr6 DP_PORT_ERROR6	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.16
rcKhiForwardingRofZagDpPortErr7 DP_PORT_ERROR7	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.17
rcKhiForwardingRofZagZag2HapErr ZAG2_HAP_ERROR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.18
rcKhiForwardingRofZagEtpEgrFifoErr ETP_EGR_FIFO_ERR	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.19
rcKhiForwardingRofZagCifErrEvent CIF_ERROR_EVENT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.20
rcKhiForwardingRofZagHabErrEvent HAB_ERROR_EVENT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.21
rcKhiForwardingRofZagCifRxDropInfo CIF RX DROP INFO	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.22
rcKhiForwardingRofZagHabRxDropInfo HAB_RX_DROP_INFO	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.23
rcKhiForwardingRofZagDpExtErr0 DP_PORT_ERROR0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.24
rcKhiForwardingRofZagDpExtErr1 DP_PORT_ERROR1	SNMPv2-SMICounter32 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.16.1.25
rcKhiForwardingRofZagDpExtErr2 DP_PORT_ERROR2	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.26
rcKhiForwardingRofZagDpExtErr3 DP_PORT_ERROR3	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.27
rcKhiForwardingRofZagDpExtErr4 DP_PORT_ERROR4	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.28
rcKhiForwardingRofZagDpExtErr5 DP_PORT_ERROR5	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.29
rcKhiForwardingRofZagDpExtErr6 DP_PORT_ERROR6	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.30
rcKhiForwardingRofZagDpExtErr7 DP_PORT_ERROR7	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.16.1.31

rcKhiForwardingRofSierraStatusTable

table

.1.3.6.1.4.1.2272.1.85.11.17 · 1 row entry · 43 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofSierraStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofSierraStatusTable'

Copy

Forwarding Sierra State Key Health Indicator MIB for RoF.

rcKhiForwardingRofSierraStatusEntry row .1.3.6.1.4.1.2272.1.85.11.17.1

Forwarding Sierra State KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofSierraStatusSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.17.1.1
rcKhiForwardingRofSierraDevId VSP assigned DEV_ID for this programmable device	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.2
rcKhiForwardingRofSierraBuild contains the build date of this device	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.3
rcKhiForwardingRofSierraBadData pkts received via HiGig0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.4
rcKhiForwardingRofSierraSbRexEvent indicates various events have occurred related to the SBus and RexBus interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.5
rcKhiForwardingRofSierraRexStatus contained information to determin ehat type of error occured during SB_REX_EVENT	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.6
rcKhiForwardingRofSierraSbStatus shows which one of the RSPng or Zagros2 devices are ready to receive SB accesses	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.7
rcKhiForwardingRofSierraSliceXWindowEvent captures error information on failed accesses to/from the Slice Window	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.8
rcKhiForwardingRofSierraPcieCoreStatus show 32 of the 512 available status signals from the Altera PCIe core	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.9
rcKhiForwardingRofSierraPcieEvent indicates when various PCIe related events have occurred	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.10
rcKhiForwardingRofSierraPSI1Status PSI1_STATUS Register related	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.11
rcKhiForwardingRofSierraPSI0Status PSI0_STATUS Register related	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.12
rcKhiForwardingRofSierraPSIEvent PSI_EVENT Register related	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.13
rcKhiForwardingRofSierraPSI1LinkStatus contents of a LINK_STATUS message received by PSI 1	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.14
rcKhiForwardingRofSierraPSI0LinkStatus contents of a LINK_STATUS message received by PSI 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.15
rcKhiForwardingRofSierraGeStatus shows status for the GE RGMII Interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.16
rcKhiForwardingRofSierraGeEvent indicates which GE related events have occurred since last cleared	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.17
rcKhiForwardingRofSierraPktEvent indicates which packet switching related events have occurred since last cleared	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.18
rcKhiForwardingRofSierraZipStatus0 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.19
rcKhiForwardingRofSierraZipStatus1 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.20
rcKhiForwardingRofSierraZipStatus2 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.21
rcKhiForwardingRofSierraZipStatus3 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.22
rcKhiForwardingRofSierraZipStatus4 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.23
rcKhiForwardingRofSierraZipStatus5 shows status for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.24
rcKhiForwardingRofSierraZipEvent0 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.25
rcKhiForwardingRofSierraZipEvent1 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.26
rcKhiForwardingRofSierraZipEvent2 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.27
rcKhiForwardingRofSierraZipEvent3 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.28
rcKhiForwardingRofSierraZipEvent4 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.29
rcKhiForwardingRofSierraZipEvent5 shows which events occurred for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.30
rcKhiForwardingRofSierraSbmStatus0 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.31
rcKhiForwardingRofSierraSbmStatus1 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.32
rcKhiForwardingRofSierraSbmStatus2 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.33
rcKhiForwardingRofSierraSbmStatus3 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.34
rcKhiForwardingRofSierraSbmStatus4 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.35
rcKhiForwardingRofSierraSbmStatus5 SBM_STATUS Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.36
rcKhiForwardingRofSierraSbmEvent0 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.37
rcKhiForwardingRofSierraSbmEvent1 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.38
rcKhiForwardingRofSierraSbmEvent2 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.39
rcKhiForwardingRofSierraSbmEvent3 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.40
rcKhiForwardingRofSierraSbmEvent4 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.41
rcKhiForwardingRofSierraSbmEvent5 SBM_EVENT Register related for ZIP interfaces	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.42
rcKhiForwardingRofSierraSepEvent various events(good/bad) that occur in the Script Engine Parsing logic section	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.85.11.17.1.43

rcKhiForwardingRofSierraForwStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.18 · 1 row entry · 24 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofSierraForwStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofSierraForwStatsTable'

Copy

Forwarding Sierra Forw Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofSierraForwStatsEntry row .1.3.6.1.4.1.2272.1.85.11.18.1

Forwarding Sierra Forw Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofSierraForwStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.18.1.1
rcKhiForwardingRofSierraGeCntRxOk counts the number of non-errored data packets received by the RX RGMII	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.2
rcKhiForwardingRofSierraGeCntTxOk counts the number of packets transmitted by the RX RGMII logic that were not marked as errored beforehand	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.3
rcKhiForwardingRofSierraGeCntRxPause counts the number of dropped non-data and pause packets received by the RX RGMII	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.4
rcKhiForwardingRofSierraPktCntGeGe counts the number of packets received by the GE interface and looped back out the GE interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.5
rcKhiForwardingRofSierraPktCntGeZ0 counts the number of packets of GE packets sent to ZIP 0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.6
rcKhiForwardingRofSierraPktCntGeZ1 counts the number of packets of GE packets sent to ZIP 1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.7
rcKhiForwardingRofSierraPktCntGeZ2 counts the number of packets of GE packets sent to ZIP 2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.8
rcKhiForwardingRofSierraPktCntGeZ3 counts the number of packets of GE packets sent to ZIP 3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.9
rcKhiForwardingRofSierraPktCntGeZ4 counts the number of packets of GE packets sent to ZIP 4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.10
rcKhiForwardingRofSierraPktCntGeZ5 counts the number of packets of GE packets sent to ZIP 5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.11
rcKhiForwardingRofSierraPktCntZ0GeOk counts the number of non-errored packets sent to GE from the ZIP 0 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.12
rcKhiForwardingRofSierraPktCntZ1GeOk counts the number of non-errored packets sent to GE from the ZIP 1 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.13
rcKhiForwardingRofSierraPktCntZ2GeOk counts the number of non-errored packets sent to GE from the ZIP 2 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.14
rcKhiForwardingRofSierraPktCntZ3GeOk counts the number of non-errored packets sent to GE from the ZIP 3 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.15
rcKhiForwardingRofSierraPktCntZ4GeOk counts the number of non-errored packets sent to GE from the ZIP 4 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.16
rcKhiForwardingRofSierraPktCntZ5GeOk counts the number of non-errored packets sent to GE from the ZIP 5 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.17
rcKhiForwardingRofSierraSepPcieCnt0 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.18
rcKhiForwardingRofSierraSepPcieCnt1 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.19
rcKhiForwardingRofSierraSepPcieCnt2 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.20
rcKhiForwardingRofSierraSepPcieCnt3 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.21
rcKhiForwardingRofSierraSepPcieCnt4 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.22
rcKhiForwardingRofSierraSepPcieCnt5 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.23
rcKhiForwardingRofSierraSepPcieCnt6 number of PCIe transactions	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.18.1.24

rcKhiForwardingRofSierraExtendedForwStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.19 · 1 row entry · 79 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofSierraExtendedForwStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofSierraExtendedForwStatsTable'

Copy

Forwarding Sierra Extended Forw Stats Key Health Indicator MIB for RoF. -- multiple instance counters

rcKhiForwardingRofSierraExtendedForwStatsEntry row .1.3.6.1.4.1.2272.1.85.11.19.1

Forwarding Sierra Extended Forw Stats KHI - RoF. -- multiple instance counters

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofSierraExtendedForwStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.19.1.1
rcKhiForwardingRofSierraZipTxFragDatCnt0 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.19.1.2
rcKhiForwardingRofSierraZipTxFragDatCnt1 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.3
rcKhiForwardingRofSierraZipTxFragDatCnt2 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.4
rcKhiForwardingRofSierraZipTxFragDatCnt3 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.5
rcKhiForwardingRofSierraZipTxFragDatCnt4 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.6
rcKhiForwardingRofSierraZipTxFragDatCnt5 count of data fragments across the ZIP interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.7
rcKhiForwardingRofSierraZipTxFragRFU0Cnt0 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.8
rcKhiForwardingRofSierraZipTxFragRFU0Cnt1 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.9
rcKhiForwardingRofSierraZipTxFragRFU0Cnt2 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.10
rcKhiForwardingRofSierraZipTxFragRFU0Cnt3 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.11
rcKhiForwardingRofSierraZipTxFragRFU0Cnt4 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.12
rcKhiForwardingRofSierraZipTxFragRFU0Cnt5 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.13
rcKhiForwardingRofSierraZipTxFragRspCnt0 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.14
rcKhiForwardingRofSierraZipTxFragRspCnt1 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.15
rcKhiForwardingRofSierraZipTxFragRspCnt2 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.16
rcKhiForwardingRofSierraZipTxFragRspCnt3 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.17
rcKhiForwardingRofSierraZipTxFragRspCnt4 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.18
rcKhiForwardingRofSierraZipTxFragRspCnt5 count of RSP SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.19
rcKhiForwardingRofSierraZipTxFragPcieCnt0 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.20
rcKhiForwardingRofSierraZipTxFragPcieCnt1 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.21
rcKhiForwardingRofSierraZipTxFragPcieCnt2 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.22
rcKhiForwardingRofSierraZipTxFragPcieCnt3 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.23
rcKhiForwardingRofSierraZipTxFragPcieCnt4 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.24
rcKhiForwardingRofSierraZipTxFragPcieCnt5 count of SB/PCIe SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.25
rcKhiForwardingRofSierraZipTxFragSephCnt0 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.26
rcKhiForwardingRofSierraZipTxFragSephCnt1 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.27
rcKhiForwardingRofSierraZipTxFragSephCnt2 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.28
rcKhiForwardingRofSierraZipTxFragSephCnt3 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.29
rcKhiForwardingRofSierraZipTxFragSephCnt4 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.30
rcKhiForwardingRofSierraZipTxFragSephCnt5 count of SEP Hi Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.31
rcKhiForwardingRofSierraZipTxFragSeplCnt0 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.32
rcKhiForwardingRofSierraZipTxFragSeplCnt1 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.33
rcKhiForwardingRofSierraZipTxFragSeplCnt2 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.34
rcKhiForwardingRofSierraZipTxFragSeplCnt3 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.35
rcKhiForwardingRofSierraZipTxFragSeplCnt4 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.36
rcKhiForwardingRofSierraZipTxFragSeplCnt5 count of SEP Lo Pri SubCmd fragments transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.37
rcKhiForwardingRofSierraZipTxFragRFU1Cnt0 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.38
rcKhiForwardingRofSierraZipTxFragRFU1Cnt1 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.39
rcKhiForwardingRofSierraZipTxFragRFU1Cnt2 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.40
rcKhiForwardingRofSierraZipTxFragRFU1Cnt3 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.41
rcKhiForwardingRofSierraZipTxFragRFU1Cnt4 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.42
rcKhiForwardingRofSierraZipTxFragRFU1Cnt5 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.43
rcKhiForwardingRofSierraZipTxFragRFU2Cnt0 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.44
rcKhiForwardingRofSierraZipTxFragRFU2Cnt1 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.45
rcKhiForwardingRofSierraZipTxFragRFU2Cnt2 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.46
rcKhiForwardingRofSierraZipTxFragRFU2Cnt3 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.47
rcKhiForwardingRofSierraZipTxFragRFU2Cnt4 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.48
rcKhiForwardingRofSierraZipTxFragRFU2Cnt5 reserved for future use	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.49
rcKhiForwardingRofSierraZipRxFragDatOkCnt0 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.50
rcKhiForwardingRofSierraZipRxFragDatOkCnt1 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.51
rcKhiForwardingRofSierraZipRxFragDatOkCnt2 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.52
rcKhiForwardingRofSierraZipRxFragDatOkCnt3 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.53
rcKhiForwardingRofSierraZipRxFragDatOkCnt4 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.54
rcKhiForwardingRofSierraZipRxFragDatOkCnt5 count of ok data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.55
rcKhiForwardingRofSierraZipRxFragRspOkCnt0 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.19.1.56
rcKhiForwardingRofSierraZipRxFragRspOkCnt1 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.19.1.57
rcKhiForwardingRofSierraZipRxFragRspOkCnt2 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.19.1.58
rcKhiForwardingRofSierraZipRxFragRspOkCnt3 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.59
rcKhiForwardingRofSierraZipRxFragRspOkCnt4 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.60
rcKhiForwardingRofSierraZipRxFragRspOkCnt5 count of ok RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.61
rcKhiForwardingRofSierraZipRxFragPcieOkCnt0 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.62
rcKhiForwardingRofSierraZipRxFragPcieOkCnt1 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.63
rcKhiForwardingRofSierraZipRxFragPcieOkCnt2 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.64
rcKhiForwardingRofSierraZipRxFragPcieOkCnt3 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.65
rcKhiForwardingRofSierraZipRxFragPcieOkCnt4 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.66
rcKhiForwardingRofSierraZipRxFragPcieOkCnt5 count of ok SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.67
rcKhiForwardingRofSierraZipRxFragSephOkCnt0 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.68
rcKhiForwardingRofSierraZipRxFragSephOkCnt1 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.69
rcKhiForwardingRofSierraZipRxFragSephOkCnt2 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.70
rcKhiForwardingRofSierraZipRxFragSephOkCnt3 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.71
rcKhiForwardingRofSierraZipRxFragSephOkCnt4 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.72
rcKhiForwardingRofSierraZipRxFragSephOkCnt5 count of ok SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.73
rcKhiForwardingRofSierraZipRxFragSeplOkCnt0 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.74
rcKhiForwardingRofSierraZipRxFragSeplOkCnt1 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.75
rcKhiForwardingRofSierraZipRxFragSeplOkCnt2 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.76
rcKhiForwardingRofSierraZipRxFragSeplOkCnt3 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.77
rcKhiForwardingRofSierraZipRxFragSeplOkCnt4 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.78
rcKhiForwardingRofSierraZipRxFragSeplOkCnt5 count of ok SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.19.1.79

rcKhiForwardingRofSierraDropStatsTable

table

.1.3.6.1.4.1.2272.1.85.11.20 · 1 row entry · 52 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofSierraDropStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofSierraDropStatsTable'

Copy

Forwarding Sierra Drop Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofSierraDropStatsEntry row .1.3.6.1.4.1.2272.1.85.11.20.1

Forwarding Sierra Drop Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofSierraDropStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.20.1.1
rcKhiForwardingRofSierraGeCntRxErr counts the number of errored packets received by the RX RGMII logic	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.2
rcKhiForwardingRofSierraGeCntTxErr counts the number of packets transmitted by the GE RGMII logic that were marked as errored before hand	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.3
rcKhiForwardingRofSierraPktCntGeDrop counts the number of packets received by the GE interface and then dropped	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.4
rcKhiForwardingRofSierraPktCntZ0GeErr counts the number of errored packets sent to GE from the ZIP 0 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.5
rcKhiForwardingRofSierraPktCntZ1GeErr counts the number of errored packets sent to GE from the ZIP 1 interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.6
rcKhiForwardingRofSierraPktCntZ2GeErr counts the number of errored packets sent to GE from the ZIP 2	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.7
rcKhiForwardingRofSierraPktCntZ3GeErr counts the number of errored packets sent to GE from the ZIP 3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.8
rcKhiForwardingRofSierraPktCntZ4GeErr counts the number of errored packets sent to GE from the ZIP 4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.9
rcKhiForwardingRofSierraPktCntZ5GeErr counts the number of errored packets sent to GE from the ZIP 5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.10
rcKhiForwardingRofSierraZipRxFragDatErrCnt0 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.11
rcKhiForwardingRofSierraZipRxFragDatErrCnt1 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.12
rcKhiForwardingRofSierraZipRxFragDatErrCnt2 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.13
rcKhiForwardingRofSierraZipRxFragDatErrCnt3 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.14
rcKhiForwardingRofSierraZipRxFragDatErrCnt4 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.15
rcKhiForwardingRofSierraZipRxFragDatErrCnt5 count of errored data frags received via the ZIP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.16
rcKhiForwardingRofSierraZipRxFragRspErrCnt0 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.17
rcKhiForwardingRofSierraZipRxFragRspErrCnt1 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.18
rcKhiForwardingRofSierraZipRxFragRspErrCnt2 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.19
rcKhiForwardingRofSierraZipRxFragRspErrCnt3 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.20
rcKhiForwardingRofSierraZipRxFragRspErrCnt4 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.21
rcKhiForwardingRofSierraZipRxFragRspErrCnt5 count of errored RSP SubCmd fragments received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.22
rcKhiForwardingRofSierraZipRxFragPcieErrCnt0 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.23
rcKhiForwardingRofSierraZipRxFragPcieErrCnt1 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.24
rcKhiForwardingRofSierraZipRxFragPcieErrCnt2 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.25
rcKhiForwardingRofSierraZipRxFragPcieErrCnt3 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.26
rcKhiForwardingRofSierraZipRxFragPcieErrCnt4 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.27
rcKhiForwardingRofSierraZipRxFragPcieErrCnt5 count of errored SB/PCIe SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.28
rcKhiForwardingRofSierraZipRxFragSephErrCnt0 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.29
rcKhiForwardingRofSierraZipRxFragSephErrCnt1 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.30
rcKhiForwardingRofSierraZipRxFragSephErrCnt2 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.31
rcKhiForwardingRofSierraZipRxFragSephErrCnt3 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.32
rcKhiForwardingRofSierraZipRxFragSephErrCnt4 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.33
rcKhiForwardingRofSierraZipRxFragSephErrCnt5 count of errored SEP Hi Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.34
rcKhiForwardingRofSierraZipRxFragSeplErrCnt0 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.35
rcKhiForwardingRofSierraZipRxFragSeplErrCnt1 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.36
rcKhiForwardingRofSierraZipRxFragSeplErrCnt2 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.37
rcKhiForwardingRofSierraZipRxFragSeplErrCnt3 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.38
rcKhiForwardingRofSierraZipRxFragSeplErrCnt4 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.39
rcKhiForwardingRofSierraZipRxFragSeplErrCnt5 count of errored SEP Lo Pri SubCmd frags received	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.40
rcKhiForwardingRofSierraZipRxFragDropCnt0 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.41
rcKhiForwardingRofSierraZipRxFragDropCnt1 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.42
rcKhiForwardingRofSierraZipRxFragDropCnt2 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.43
rcKhiForwardingRofSierraZipRxFragDropCnt3 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.44
rcKhiForwardingRofSierraZipRxFragDropCnt4 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.20.1.45
rcKhiForwardingRofSierraZipRxFragDropCnt5 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.20.1.46
rcKhiForwardingRofSierraZipRxFragInvctlCnt0 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.20.1.47
rcKhiForwardingRofSierraZipRxFragInvctlCnt1 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.48
rcKhiForwardingRofSierraZipRxFragInvctlCnt2 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.49
rcKhiForwardingRofSierraZipRxFragInvctlCnt3 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.50
rcKhiForwardingRofSierraZipRxFragInvctlCnt4 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.51
rcKhiForwardingRofSierraZipRxFragInvctlCnt5 count of frags dropped(usually due to bad headers)	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.20.1.52

rcKhiForwardingRofRspForwTable

table

.1.3.6.1.4.1.2272.1.85.11.21 · 1 row entry · 68 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofRspForwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofRspForwTable'

Copy

Forwarding RSP Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofRspForwEntry row .1.3.6.1.4.1.2272.1.85.11.21.1

Forwarding RSP Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofRspForwSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.21.1.1
rcKhiForwardingRofRspForwSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.21.1.2
rcKhiForwardingRofRspForwReg Reg	Integer32	.1.3.6.1.4.1.2272.1.85.11.21.1.3
rcKhiForwardingRofRspForwHab0RxPktCounterReg HAB0_RX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.4
rcKhiForwardingRofRspForwHab0TxPktCounterReg HAB0_TX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.5
rcKhiForwardingRofRspForwHab1RxPktCounterReg HAB1_RX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.6
rcKhiForwardingRofRspForwHab1TxPktCounterReg HAB1_TX_PACKET_COUNTER_RE	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.7
rcKhiForwardingRofRspForwCif0RxPktCntReg CIF0_RX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.8
rcKhiForwardingRofRspForwCif0TxPktCntReg CIF0_TX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.9
rcKhiForwardingRofRspForwCif1RxPktCntReg CIF1_RX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.10
rcKhiForwardingRofRspForwCif1TxPktCntReg CIF1_TX_PACKET_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.11
rcKhiForwardingRofRspForwPbmHab0RxPktCntReg PBM_HAB0_RX_PACKLET_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.12
rcKhiForwardingRofRspForwPbmHab0TxPktCntReg PBM_HAB0_TX_PACKLET_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.13
rcKhiForwardingRofRspForwPbmHab1RxPktCntReg PBM_HAB1_RX_PACKLET_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.14
rcKhiForwardingRofRspForwPbmHab1TxPktCntReg PBM_HAB1_TX_PACKLET_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.15
rcKhiForwardingRofRspForwPbmHab0Hab1SopEopCntReg PBM_HAB0_HAB1_SOP_EOP_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.16
rcKhiForwardingRofRspForwSamPackletInCntReg SAM_PACKLET_IN_COUNTS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.17
rcKhiForwardingRofRspForwSamPackletOutCntReg SAM_PACKLET_OUT_COUNTS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.18
rcKhiForwardingRofRspForwSamAe0GabTransRegTx SAM_AE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.19
rcKhiForwardingRofRspForwSamAe0GabTransRegRx SAM_AE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.20
rcKhiForwardingRofRspForwSamAe1GabTransRegTx SAM_AE1GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.21
rcKhiForwardingRofRspForwSamAe1GabTransRegRx SAM_AE1GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.22
rcKhiForwardingRofRspForwSamAe2GabTransRegTx SAM_AE2GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.23
rcKhiForwardingRofRspForwSamAe2GabTransRegRx SAM_AE2GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.24
rcKhiForwardingRofRspForwSamAe3GabTransRegTx SAM_AE3GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.25
rcKhiForwardingRofRspForwSamAe3GabTransRegRx SAM_AE3GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.26
rcKhiForwardingRofRspForwSamR6Le0GabTransRegTx SAM_R6LE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.27
rcKhiForwardingRofRspForwSamR6Le0GabTransRegRx SAM_R6LE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.28
rcKhiForwardingRofRspForwSamR6Le1GabTransRegTx SAM_R6LE1GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.29
rcKhiForwardingRofRspForwSamR6Le1GabTransRegRx SAM_R6LE1GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.30
rcKhiForwardingRofRspForwSamR6Le2GabTransRegTx SAM_R6LE2GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.31
rcKhiForwardingRofRspForwSamR6Le2GabTransRegRx SAM_R6LE2GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.32
rcKhiForwardingRofRspForwSamR6Le3GabTransRegTx SAM_R6LE3GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.33
rcKhiForwardingRofRspForwSamR6Le3GabTransRegRx SAM_R6LE3GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.34
rcKhiForwardingRofRspForwSamR5LeGabTransRegTx SAM_R5LEGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.35
rcKhiForwardingRofRspForwSamR5LeGabTransRegRx SAM_R5LEGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.36
rcKhiForwardingRofRspForwSamCifGabTransRegTx SAM_CIFGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.37
rcKhiForwardingRofRspForwSamCifGabTransRegRx SAM_CIFGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.38
rcKhiForwardingRofRspForwSanHle0GabTransRegTx SAM_HLE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.39
rcKhiForwardingRofRspForwSanHle0GabTransRegRx SAM_HLE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.40
rcKhiForwardingRofRspForwSamAlseGabTransRegTx SAM_ALSEGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.41
rcKhiForwardingRofRspForwSamAlseGabTransRegRx SAM_ALSEGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.42
rcKhiForwardingRofRspForwAmPaGabPackletInReg AM_PAGAB_PACKLET_IN_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.43
rcKhiForwardingRofRspForwAmPrGabPacketOutReg AM_PRGAB_PACKLET_OUT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.44
rcKhiForwardingRofRspForwAmAe0GabTransRegTx AM_AE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.21.1.45
rcKhiForwardingRofRspForwAmAe0GabTransRegRx AM_AE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.21.1.46
rcKhiForwardingRofRspForwAmAe1GabTransRegTx AM_AE1GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.21.1.47
rcKhiForwardingRofRspForwAmAe1GabTransRegRx AM_AE1GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.48
rcKhiForwardingRofRspForwAmAe2GabTransRegTx AM_AE2GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.49
rcKhiForwardingRofRspForwAmAe2GabTransRegRx AM_AE2GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.50
rcKhiForwardingRofRspForwAmAe3GabTransRegTx AM_AE3GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.51
rcKhiForwardingRofRspForwAmAe3GabTransRegRx AM_AE3GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.52
rcKhiForwardingRofRspForwAmR6Le0GabTransRegTx AM_R6LE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.53
rcKhiForwardingRofRspForwAmR6Le0GabTransRegRx AM_R6LE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.54
rcKhiForwardingRofRspForwAmR6Le1GabTransRegTx AM_R6LE1GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.55
rcKhiForwardingRofRspForwAmR6Le1GabTransRegRx AM_R6LE1GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.56
rcKhiForwardingRofRspForwAmR6Le2GabTransRegTx AM_R6LE2GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.57
rcKhiForwardingRofRspForwAmR6Le2GabTransRegRx AM_R6LE2GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.58
rcKhiForwardingRofRspForwAmR6Le3GabTransRegTx AM_R6LE3GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.59
rcKhiForwardingRofRspForwAmR6Le3GabTransRegRx AM_R6LE3GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.60
rcKhiForwardingRofRspForwAmR5LeGabTransRegTx AM_R5LEGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.61
rcKhiForwardingRofRspForwAmR5LeGabTransRegRx AM_R5LEGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.62
rcKhiForwardingRofRspForwAmCifGabTransRegTx AM_CIFGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.63
rcKhiForwardingRofRspForwAmCifGabTransRegRx AM_CIFGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.64
rcKhiForwardingRofRspForwAmAlseGabTransRegTx AM_ALSEGAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.65
rcKhiForwardingRofRspForwAmAlseGabTransRegRx AM_ALSEGAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.66
rcKhiForwardingRofRspForwAmHle0GabTransRegTx AM_HLE0GAB_TRANSACTIONS_REG_TX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.67
rcKhiForwardingRofRspForwAmHle0GabTransRegRx AM_HLE0GAB_TRANSACTIONS_REG_RX	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.21.1.68

rcKhiForwardingRofRspDropTable

table

.1.3.6.1.4.1.2272.1.85.11.22 · 1 row entry · 52 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofRspDropTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofRspDropTable'

Copy

Drop RSP Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofRspDropEntry row .1.3.6.1.4.1.2272.1.85.11.22.1

Forwarding RSP Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofRspDropSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.22.1.1
rcKhiForwardingRofRspDropSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.22.1.2
rcKhiForwardingRofRspDropReg Reg	Integer32	.1.3.6.1.4.1.2272.1.85.11.22.1.3
rcKhiForwardingRofRspDropHab0RxErrCounterReg HAB0_RX_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.4
rcKhiForwardingRofRspDropHab1RxErrCounterReg HAB1_RX_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.5
rcKhiForwardingRofRspDropCif0RxErrCounterReg CIF0_RX_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.6
rcKhiForwardingRofRspDropCif1RxErrCounterReg CIF1_RX_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.7
rcKhiForwardingRofRspDropGsFloodingMeterRead GS_FLOODING_METER_RED	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.8
rcKhiForwardingRofRspDropGsMacLkupErrDA GS_MAC_LKUP_ERR_DA	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.22.1.9
rcKhiForwardingRofRspDropGsFilterActDeny GS_FILTER_ACT_DENY	SNMPv2-SMICounter64 Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.85.11.22.1.10
rcKhiForwardingRofRspDropGsIstDstNni GS_IST_DST_NNI	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.85.11.22.1.11
rcKhiForwardingRofRspDropGsSrcMacLkup GS_SRC_MAC_LKUP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.12
rcKhiForwardingRofRspDropGsUnknownSA GS_UNKNOWN_SA	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.13
rcKhiForwardingRofRspDropGsDstMacLkup GS_DST_MAC_LKUP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.14
rcKhiForwardingRofRspDropGsSrcKnockOut GS_SRC_KNOCK_OUT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.15
rcKhiForwardingRofRspDropGsNoUniNniMem GS_NO_UNI_NNI_MEM	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.16
rcKhiForwardingRofRspDropGsIstNoUniMem GS_IST_NO_UNI_MEM	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.17
rcKhiForwardingRofRspDropGsCidDiscard GS_CID_DISCARD	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.18
rcKhiForwardingRofRspDropGsLrnDisableUnkwnSA GS_LRN_DISABLE_UNKWN_SA	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.19
rcKhiForwardingRofRspDropGsInstMemParityExp GS_INST_MEM_PARITY_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.20
rcKhiForwardingRofRspDropGsPcOver4095Exp GS_PC_OVER_4095_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.21
rcKhiForwardingRofRspDropGsPackletActiveExp GS_PACKLET_ACTIVE_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.22
rcKhiForwardingRofRspDropGsNonAlignedAddrExp GS_NON_ALIGNED_ADDR_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.23
rcKhiForwardingRofRspDropGsIllegalRegionExp GS_ILLEGAL_REGION_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.24
rcKhiForwardingRofRspDropGsSplitOperActiveExp GS_SPLIT_OPER_ACTIVE_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.25
rcKhiForwardingRofRspDropGsSplitOperNotDoneExp GS_SPLIT_OPER_NOT_DONE_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.26
rcKhiForwardingRofRspDropGsGabTimeoutExp GS_GAB_TIMEOUT_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.27
rcKhiForwardingRofRspDropGsInvalidOptypeExp GS_INVALID_OPTYPE_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.28
rcKhiForwardingRofRspDropGsIllegalArgExp GS_ILLEGAL_ARG_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.29
rcKhiForwardingRofRspDropGsEccErrorExp GS_ECC_ERROR_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.30
rcKhiForwardingRofRspDropGsSearchError GS_SERCH_ERROR	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.31
rcKhiForwardingRofRspDropGsRadixSearchRunOnExp GS_RADIX_SEARCH_RUN_ON_EXP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.32
rcKhiForwardingRofRspDropGsSearchMgmtError GS_SEARCH_MGMT_ERROR	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.33
rcKhiForwardingRofRspDropGsHwFailureExp GS_HW_FAILURE_EXP	SNMPv2-SMICounter64 Constraints: range: 0-1023	.1.3.6.1.4.1.2272.1.85.11.22.1.34
rcKhiForwardingRofRspDropGsDontKnowExp GS_DONT_KNOW_EXP	SNMPv2-SMICounter64 Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.85.11.22.1.35
rcKhiForwardingRofRspDropGsMacLkupErrSA GS_MAC_LKUP_ERR_SA	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.36
rcKhiForwardingRofRspDropGsIpv4OcsErr GS_IPV4_OCS_ERR	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.37
rcKhiForwardingRofRspDropGsIsidLkupFail GS_ISID_LKUP_FAIL	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.38
rcKhiForwardingRofRspDropGsNniDstSpbDrop GS_NNI_DST_SPB_DROP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.39
rcKhiForwardingRofRspDropGsNniIstExtraUniCpy GS_NNI_IST_EXTRA_UNI_CPY	SNMPv2-SMICounter64 Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.85.11.22.1.40
rcKhiForwardingRofRspDropGsNniUnkwNBDA GS_NNI_UNKNOWN_BDA	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.41
rcKhiForwardingRofRspDropGsNNiIstDown GS_NNI_IST_DOWN	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.42
rcKhiForwardingRofRspDropGsPackletErr GS_PACKLET_ERR	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.43
rcKhiForwardingRofRspDropGsIsidLkupMiss GS_ISID_LKUP_MISS	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.22.1.44
rcKhiForwardingRofRspDropGsNniIstPeerUpBvid2Drop GS_NNI_IST_PEER_UP_BVID2_DROP	SNMPv2-SMICounter64 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.85.11.22.1.45
rcKhiForwardingRofRspDropGsUnknownMcastBda GS_UNKNOWN_MCAST_BDA	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.46
rcKhiForwardingRofRspDropGsNniCfmDrop GS_NNI_CFM_DROP	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.47
rcKhiForwardingRofRspDropGsIpNotEnDrop GS_IP_NOT_EN_DROP	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.48
rcKhiForwardingRofRspDropGsIpv6LkupFail GS_IPV6_LKUP_FAIL	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.49
rcKhiForwardingRofRspDropGsIpv6OcsErr GS_IPV6_OCS_ERR	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.50
rcKhiForwardingRofRspDropGsIpmcV4Drop GS_IPMC_V4_DROP	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.51
rcKhiForwardingRofRspDropGsV4LkupDrop GS_V4_LKUP_DROP	SNMPv2-SMICounter64 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.22.1.52

rcKhiForwardingRofRspStatusTable

table

.1.3.6.1.4.1.2272.1.85.11.23 · 1 row entry · 32 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofRspStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofRspStatusTable'

Copy

Status RSP Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofRspStatusEntry row .1.3.6.1.4.1.2272.1.85.11.23.1

Forwarding RSP Stats KHI - RoF.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiForwardingRofRspStatusSlot Slot Number	Integer32 Constraints: range: 100-1000000	.1.3.6.1.4.1.2272.1.85.11.23.1.1
rcKhiForwardingRofRspStatusSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.23.1.2
rcKhiForwardingRofRspStatusReg Reg	Integer32	.1.3.6.1.4.1.2272.1.85.11.23.1.3
rcKhiForwardingRofRspStatusDeviceIdReg DEVICE_ID_REG	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.11.23.1.4
rcKhiForwardingRofRspStatusPllStatusReg PLL_STATUS_REG	SNMPv2-SMICounter64 Enumerated Values: 1 md5 2 sha 4 sha256 255 any Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.5
rcKhiForwardingRofRspStatusEdi0StatusReg EDI0_STATUS_REG	SNMPv2-SMICounter64 Enumerated Values: 1 desCbc 5 tripleDesCbc 7 aesCbc 255 any Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.6
rcKhiForwardingRofRspStatusEdi1StatusReg EDI1_STATUS_REG	SNMPv2-SMICounter64 Constraints: range: 128-128 range: 192-192 range: 256-256	.1.3.6.1.4.1.2272.1.85.11.23.1.7
rcKhiForwardingRofRspStatusEdi2StatusReg EDI2_STATUS_REG	SNMPv2-SMICounter64 Enumerated Values: 1 modp768 2 modp1024 14 modp2048 255 any Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.8
rcKhiForwardingRofRspStatusEdi3StatusReg EDI3_STATUS_REG	SNMPv2-SMICounter64 Enumerated Values: 1 main 2 aggressive Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.9
rcKhiForwardingRofRspStatusEdi4StatusReg EDI4_STATUS_REG	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.85.11.23.1.10
rcKhiForwardingRofRspStatusEdi5StatusReg EDI5_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.11
rcKhiForwardingRofRspStatusAeStatusReg AE_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.12
rcKhiForwardingRofRspStatusAlse0StatusReg ALSE0_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.13
rcKhiForwardingRofRspStatusHab0StatusReg HAB0_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.14
rcKhiForwardingRofRspStatusHab1StatusReg HAB1_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.15
rcKhiForwardingRofRspStatusCif0StatusReg CIF0_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.16
rcKhiForwardingRofRspStatusCif1StatusReg CIF1_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.17
rcKhiForwardingRofRspStatusHleStatusReg HLE_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.18
rcKhiForwardingRofRspStatusPbmStatusReg PBM_STATUS_REG	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.11.23.1.19
rcKhiForwardingRofRspStatusSamThreadActive0Reg SAM_THREAD_ACTIVE0_REG	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.11.23.1.20
rcKhiForwardingRofRspStatusSamThreadActive1Reg SAM_THREAD_ACTIVE1_REG	SNMPv2-SMICounter64 Enumerated Values: 1 preSharedKey 2 dssSignatures 3 rsaSignatures 4 encryptionWithRsa 5 digitalCertificate Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.21
rcKhiForwardingRofRspStatusSamThreadActive2Reg SAM_THREAD_ACTIVE2_REG	SNMPv2-SMICounter64 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.85.11.23.1.22
rcKhiForwardingRofRspStatusSamThreadActive3Reg SAM_THREAD_ACTIVE3_REG	SNMPv2-SMICounter64 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.85.11.23.1.23
rcKhiForwardingRofRspStatusSamThreadActive4Reg SAM_THREAD_ACTIVE4_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.24
rcKhiForwardingRofRspStatusSamThreadActive5Reg SAM_THREAD_ACTIVE5_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.25
rcKhiForwardingRofRspStatusSamThreadActive6Reg SAM_THREAD_ACTIVE6_REG	SNMPv2-SMICounter64 Enumerated Values: 1 modp768 2 modp1024 14 modp2048 255 any Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.26
rcKhiForwardingRofRspStatusSamThreadActive7Reg SAM_THREAD_ACTIVE7_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.27
rcKhiForwardingRofRspStatusSamThreadCountReg SAM_THREAD_COUNT_REG	SNMPv2-SMICounter64 Enumerated Values: 1 up 2 down Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.28
rcKhiForwardingRofRspStatusAmPcGabPbmThreadStartsReg AM_PCGAB_PBM_THREAD_STARTS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.29
rcKhiForwardingRofRspStatusAmPcGabBkgrdThreadReg AM_PCGAB_BACKGROUND_THREAD_REG	SNMPv2-SMICounter64 Enumerated Values: 1 crl 2 ocsp 3 none Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.30
rcKhiForwardingRofRspStatusAmThreadActiveReg AM_THREAD_ACTIVE_REG	SNMPv2-SMICounter64 Enumerated Values: 1 v1 2 v2 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.23.1.31
rcKhiForwardingRofRspStatusAmThreadCountReg AM_THREAD_COUNT_REG	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.85.11.23.1.32

rcKhiForwardingRofRspErrorTable

table

.1.3.6.1.4.1.2272.1.85.11.24 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiForwardingRofRspErrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiForwardingRofRspErrorTable'

Copy

Status RSP Stats Key Health Indicator MIB for RoF.

rcKhiForwardingRofRspErrorEntry row .1.3.6.1.4.1.2272.1.85.11.24.1

Forwarding RSP Stats KHI - RoF.

Indexes

rcIkeActiveSAId rcIkeActiveSALocalIfIndex rcIkeActiveSALocalAddrType rcIkeActiveSALocalAddr rcIkeActiveSARemoteAddrType rcIkeActiveSARemoteAddr

Column	Syntax	OID
rcKhiForwardingRofRspErrorSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.24.1.1
rcKhiForwardingRofRspErrorSlice Slice Number	Integer32	.1.3.6.1.4.1.2272.1.85.11.24.1.2
rcKhiForwardingRofRspErrorReg Reg	Integer32	.1.3.6.1.4.1.2272.1.85.11.24.1.3
rcKhiForwardingRofRspErrorHifErrorStatusReg HIF_ERROR_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.4
rcKhiForwardingRofRspErrorHab0ErrorStatusReg HAB0_ERROR_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.5
rcKhiForwardingRofRspErrorHab1ErrorStatusReg HAB1_ERROR_STATUS_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.6
rcKhiForwardingRofRspErrorErdi0EccSoftErrorCntReg ERDI0_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.11.24.1.7
rcKhiForwardingRofRspErrorErdi1EccSoftErrorCntReg ERDI1_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Enumerated Values: 1 preSharedKey 2 dssSignatures 3 rsaSignatures 4 encryptionWithRsa Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.8
rcKhiForwardingRofRspErrorErdi2EccSoftErrorCntReg ERDI2_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.9
rcKhiForwardingRofRspErrorErdi3EccSoftErrorCntReg ERDI3_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Enumerated Values: 1 md5 2 sha 4 sha256 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.10
rcKhiForwardingRofRspErrorErdi4EccSoftErrorCntReg ERDI4_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Enumerated Values: 1 desCbc 5 tripleDesCbc 7 aesCbc Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.11
rcKhiForwardingRofRspErrorErdi5EccSoftErrorCntReg ERDI4_ECC_SOFT_ERROR_COUNT_REG	SNMPv2-SMICounter64 Constraints: range: 128-128 range: 192-192 range: 256-256	.1.3.6.1.4.1.2272.1.85.11.24.1.12
rcKhiForwardingRofRspErrorErdi0EccErrorCounterReg ERDI0_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Enumerated Values: 1 modp768 2 modp1024 14 modp2048 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.13
rcKhiForwardingRofRspErrorErdi1EccErrorCounterReg ERDI1_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Enumerated Values: 1 main 2 aggressive Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.14
rcKhiForwardingRofRspErrorErdi2EccErrorCounterReg ERDI2_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.15
rcKhiForwardingRofRspErrorErdi3EccErrorCounterReg ERDI3_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Enumerated Values: 1 inactive 2 active Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.16
rcKhiForwardingRofRspErrorErdi4EccErrorCounterReg ERDI4_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Enumerated Values: 1 initiator 2 responder Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.17
rcKhiForwardingRofRspErrorErdi5EccErrorCounterReg ERDI5_ECC_ERROR_COUNTER_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.18
rcKhiForwardingRofRspErrorCif0DropInfoReg CIF0_DROP_INFO_REG	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.19
rcKhiForwardingRofRspErrorCif1DropInfoReg CIF1_DROP_INFO_REG	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.11.24.1.20
rcKhiForwardingRofRspErrorHab0DropInfoReg HAB0_DROP_INFO_REG	SNMPv2-SMICounter64 Enumerated Values: 0 md5 1 sha 2 sha256 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.21
rcKhiForwardingRofRspErrorHab1DropInfoReg HAB1_DROP_INFO_REG	SNMPv2-SMICounter64 Enumerated Values: 0 desCbc 1 tripleDesCbc 2 aesCbc Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.11.24.1.22

rcKhiCppPortStatsTable

table

.1.3.6.1.4.1.2272.1.85.12.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiCppPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiCppPortStatsTable'

Copy

Khi Cpp Port Statistics MIB - All VSP Data.

rcKhiCppPortStatsEntry row .1.3.6.1.4.1.2272.1.85.12.3.1

Khi Cpp Port Statistics - VSP table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiCppPortStatsPort Port Number-this entry contains information about packet type, count of Rx and Tx packet	InterfaceIndex Enumerated Values: 1 main 2 aggressive Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.85.12.3.1.1
rcKhiCppPortStatsPacket Packet Type	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.85.12.3.1.2
rcKhiCppPortStatsPacketName Name of the Packet	OctetString Enumerated Values: 0 md5 1 sha1 2 sha256 3 aes-xcbc	.1.3.6.1.4.1.2272.1.85.12.3.1.3
rcKhiCppPortStatsRxPackets Rx count for a particular Packet Type	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.12.3.1.4
rcKhiCppPortStatsTxPackets Tx count for a particular Packet Type	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.12.3.1.5

rcKhiCppIoCopStatsTable

table

.1.3.6.1.4.1.2272.1.85.12.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiCppIoCopStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiCppIoCopStatsTable'

Copy

Khi Cpp IoCop Statistics MIB - All VSP Data.

rcKhiCppIoCopStatsEntry row .1.3.6.1.4.1.2272.1.85.12.4.1

Khi Cpp IoCop Statistics - VSP table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiCppIoCopStatsSlot Slot Number	Integer32	.1.3.6.1.4.1.2272.1.85.12.4.1.1
rcKhiCppIoCopStatsMacMgmtRxPackets MacMgmt Rx Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.12.4.1.2
rcKhiCppIoCopStatsIpFixRxPackets IpFix Rx Packets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.85.12.4.1.3

rcKhiMonitoringTable

table

.1.3.6.1.4.1.2272.1.85.13.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcKhiMonitoringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcKhiMonitoringTable'

Copy

Khi monitoring Data

rcKhiMonitoringEntry row .1.3.6.1.4.1.2272.1.85.13.1.1

Khi Monitoring line card entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcKhiMonitoringSlot An unique index used to identify a particular slot of line card in the system.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.85.13.1.1.1
rcKhiMonitoringAMRXErrThreshold AM RX error threshold.	Integer32r/w Enumerated Values: 1 preSharedKey 2 dssSignatures 3 rsaSignatures 4 encryptionWithRsa	.1.3.6.1.4.1.2272.1.85.13.1.1.2
rcKhiMonitoringAMShortPktErrThreshold AM Short packet error threshold.	Integer32r/w	.1.3.6.1.4.1.2272.1.85.13.1.1.3
rcKhiMonitoringAMExpPktThreshold AM Exp Packet threshold.	Integer32r/w Enumerated Values: 1 md5 2 sha 5 sha256	.1.3.6.1.4.1.2272.1.85.13.1.1.4
rcKhiMonitoringAMCongestionDropThreshold AM Congestion Drop threshold.	Integer32r/w Enumerated Values: 2 desCbc 3 tripleDesCbc 12 aesCbc	.1.3.6.1.4.1.2272.1.85.13.1.1.5
rcKhiMonitoringAMProcErrThreshold AM proc Error.	Integer32r/w Constraints: range: 128-128 range: 192-192 range: 256-256	.1.3.6.1.4.1.2272.1.85.13.1.1.6
rcKhiMonitoringPMProcErrThreshold PM proc Error.	Integer32r/w Enumerated Values: 1 modp768 2 modp1024 14 modp2048	.1.3.6.1.4.1.2272.1.85.13.1.1.7
rcKhiMonitoringFabricDropsThreshold Fabric drops.	Integer32r/w Enumerated Values: 1 main 2 aggressive	.1.3.6.1.4.1.2272.1.85.13.1.1.8
rcKhiMonitoringPoliceDropsThreshold Police Drops.	Integer32r/w	.1.3.6.1.4.1.2272.1.85.13.1.1.9
rcKhiMonitoringFoqDropsThreshold Foq Drops.	Integer32r/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.2272.1.85.13.1.1.10
rcKhiMonitoringLegacyDropsThreshold Legacy Drops.	Integer32r/w Enumerated Values: 1 initiator 2 responder	.1.3.6.1.4.1.2272.1.85.13.1.1.11

rcIkeProfileTable

table

.1.3.6.1.4.1.2272.1.86.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIkeProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIkeProfileTable'

Copy

This table contains a list of profiles
consisting of algorithms and other
configuration that can be used during an
IKE Phase 1 connection.

rcIkeProfileEntry row .1.3.6.1.4.1.2272.1.86.1.1

An entry containing configuration information
for authentication algorithms, encryption
algorithms, Diffie-Helman group, exchange-mode
and lifetime-seconds to be used for a Phase 1
negotiation.

Indexes

No indexes recorded

Column	Syntax	OID
rcIkeProfileName This object contains the name of this Profile.	OctetString	.1.3.6.1.4.1.2272.1.86.1.1.1
rcIkeProfileHashAlgorithm This object specifies the hash algorithms that can be used during IKE Phase 1 SA negotiation.	Enumerationr/w Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.86.1.1.2
rcIkeProfileEncryptionAlgorithm This object specifies the encryption algorithms that can be used during IKE Phase 1 SA negotiation.	Enumerationr/w Enumerated Values: 1 elanTransparent 2 elan 3 etree 4 l2vsn	.1.3.6.1.4.1.2272.1.86.1.1.3
rcIkeProfileEncryptKeyLen This object specifies the key length that should be be used during IKE Phase 1 SA negotiation.	Integer32r/w	.1.3.6.1.4.1.2272.1.86.1.1.4
rcIkeProfileDHGroup This object specifies the Diffie-Hellman groups that can be used during IKE Phase 1 SA negotiation.	Enumerationr/w	.1.3.6.1.4.1.2272.1.86.1.1.5
rcIkeProfileExchangeMode This object specifies the IKE Phase 1 negotiation mode. Only main mode is supported for this release.	Enumerationr/w Constraints: range: 1-1000000	.1.3.6.1.4.1.2272.1.86.1.1.6
rcIkeProfileLifetimeSeconds This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration.	Unsigned32r/w Enumerated Values: 1 none 2 flushMacFdb 3 syncMacFdb	.1.3.6.1.4.1.2272.1.86.1.1.7
rcIkeProfileRowStatus This object is used to create or delete entries in this table.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 config 2 discoverLocal 3 discoverRemote 4 management 5 discoverBoth 6 spbm 7 mgmtDiscoverLocal 8 mgmtDiscoverRemote 9 mgmtDiscoverBoth Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.86.1.1.8

rcIkePolicyTable

table

.1.3.6.1.4.1.2272.1.86.2 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIkePolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIkePolicyTable'

Copy

This table contains a list of IKE Phase 1
policy entries.

rcIkePolicyEntry row .1.3.6.1.4.1.2272.1.86.2.1

.

Indexes

No indexes recorded

Column	Syntax	OID
rcIkePolicyLocalIfIndex This object specifies the Interface Index of the local address. Only port and vlan if-index are supported for this release.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.86.2.1.1
rcIkePolicyLocalAddrType This object specifies the type of address field in the rcIkePolicyLocalAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Constraints: range: 1-16777215 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.2.1.2
rcIkePolicyLocalAddr This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkePolicyLocalAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.86.2.1.3
rcIkePolicyRemoteAddrType This object specifies the type of address field in the rcIkePolicyRemoteAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Constraints: range: 0-65 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.2.1.4
rcIkePolicyRemoteAddr This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkePolicyRemoteAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.86.2.1.5
rcIkePolicyName This object specifies the name given to the policy. The name should be assigned during creation of the policy. Changing the name after the policy is created is not allowed.	OctetStringr/w	.1.3.6.1.4.1.2272.1.86.2.1.6
rcIkePolicyProfileName This object specifies the name of the profile (rcIkeProfileName) that should be used for this policy.	OctetStringr/w Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.86.2.1.7
rcIkePolicyAuthenticationMethod This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in this release.	Enumerationr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.86.2.1.8
rcIkePolicyPSKValue This object specifies the value of the Pre-Shared Key if the authentication method is set to PSK.	OctetStringr/w	.1.3.6.1.4.1.2272.1.86.2.1.9
rcIkePolicyDPDTimeout This object specifies the Dead Peer Detection timeout in seconds.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.86.2.1.10
rcIkePolicyP2PFS This object specifies whether or not perfect forward secrecy is used when refreshing keys. Enable indicates that PFS SHOULD be used.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.86.2.1.11
rcIkePolicyP2PfsUseIkeGroup This object specifies whether or not to use the same GroupId (Diffie-Hellman Group) for phase 2 as was used in phase 1. If P2PFS is disabled, this entry SHOULD be ignored.	EnableValuer/w Enumerated Values: 1 config 2 discoverLocal 3 discoverRemote 4 management 5 discoverBoth 6 spbm 7 mgmtDiscoverLocal 8 mgmtDiscoverRemote 9 mgmtDiscoverBoth	.1.3.6.1.4.1.2272.1.86.2.1.12
rcIkePolicyP2PfsDHGroup This object specifies the Diffie-Hellman group to use for phase 2 when the object rcIkePolicyP2PFS is enabled and the object rcIkePolicyP2PfsUseIkeGroup is disabled.	Enumerationr/w	.1.3.6.1.4.1.2272.1.86.2.1.13
rcIkePolicyAdminState This object specifies whether the policy is administratively enabled or disabled.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.86.2.1.14
rcIkePolicyOperStatus This object specifies whether the policy is operationally up or down.	Enumeration	.1.3.6.1.4.1.2272.1.86.2.1.15
rcIkePolicyRowStatus This object is used to create or delete entries in this table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-16777215 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.86.2.1.16
rcIkePolicyRevocationCheckMethod This object specifies the proposed revocation-check method for digital-certificate type authentication-method.	Enumerationr/w Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.86.2.1.17
rcIkePolicyProfileVersion This object maps to the version of ike profile selected. Default value of this object is version 1 (v1)	Enumerationr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.86.2.1.18
rcIkePolicyPeerName This object specifies the value of the Peer name if the authentication method is set to digital certificate.	OctetStringr/w Enumerated Values: 1 elanTransparent 2 elan 3 etree 4 l2vsn	.1.3.6.1.4.1.2272.1.86.2.1.19

rcIkeActiveSATable

table

.1.3.6.1.4.1.2272.1.86.4 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIkeActiveSATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIkeActiveSATable'

Copy

This table contains a list of IKE Phase 1
Security Association entries.

rcIkeActiveSAEntry row .1.3.6.1.4.1.2272.1.86.4.1

.

Indexes

No indexes recorded

Column	Syntax	OID
rcIkeActiveSAId This object specifies the unique ID of a SA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.86.4.1.1
rcIkeActiveSALocalIfIndex This object specifies the interface index of the local address. Only port and vlan if-index are supported for this release.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.86.4.1.2
rcIkeActiveSALocalAddrType This object specifies the type of address field in the rcIkeActiveSALocalAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Constraints: range: 1-512 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.4.1.3
rcIkeActiveSALocalAddr This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkeActiveSALocalAddrType.	INET-ADDRESS-MIBInetAddress Constraints: range: 5-15	.1.3.6.1.4.1.2272.1.86.4.1.4
rcIkeActiveSARemoteAddrType This object specifies the type of address field in the rcIkeActiveSARemoteAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Constraints: range: 10-32 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.4.1.5
rcIkeActiveSARemoteAddr This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkeActiveSARemoteAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.86.4.1.6
rcIkeActiveSAName This object specifies the name for the SA.	OctetString	.1.3.6.1.4.1.2272.1.86.4.1.7
rcIkeActiveSAAuthenticationMethod This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in this release.	Enumeration Enumerated Values: 1 none 2 even 3 odd	.1.3.6.1.4.1.2272.1.86.4.1.8
rcIkeActiveSADPDTimeout This object specifies the Dead Peer Detection timeout in seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.86.4.1.9
rcIkeActiveSAHashAlgorithm This object specifies the hash algorithm negotiated for this IKE Phase 1 SA.	Enumeration	.1.3.6.1.4.1.2272.1.86.4.1.10
rcIkeActiveSAEncryptionAlgorithm This object specifies the encryption algorithm negotiated for this IKE Phase 1 SA.	Enumeration Constraints: range: 5-15	.1.3.6.1.4.1.2272.1.86.4.1.11
rcIkeActiveSAEncryptKeyLen This object specifies the encryption key length negotiated for this IKE Phase 1 SA.	Integer32 Enumerated Values: 1 none 2 ipv4Offset 3 ipv6Offset	.1.3.6.1.4.1.2272.1.86.4.1.12
rcIkeActiveSADHGroup This object specifies the Diffie-Hellman group negotiated for this IKE Phase 1 SA.	Enumeration	.1.3.6.1.4.1.2272.1.86.4.1.13
rcIkeActiveSAExchangeMode This object specifies the IKE Phase 1 SA mode.	Enumeration	.1.3.6.1.4.1.2272.1.86.4.1.14
rcIkeActiveSALifetimeSeconds This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.86.4.1.15
rcIkeActiveSAStatus This object specifies the amount of time to propose an IKE Phase 1 SA remain valid during IKE Phase 1 negotiation. A value of 0 means no expiration.	Enumeration	.1.3.6.1.4.1.2272.1.86.4.1.16
rcIkeActiveSAInitiator This object specifies the whether the SA was created by an Initiator or a Responder	Enumeration	.1.3.6.1.4.1.2272.1.86.4.1.17

rcIkeV2ProfileTable

table

.1.3.6.1.4.1.2272.1.86.5 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIkeV2ProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIkeV2ProfileTable'

Copy

This table contains a list of Ike v2 profiles
consisting of algorithms and other
configuration that can be used during an
IKE connection.

rcIkeV2ProfileEntry row .1.3.6.1.4.1.2272.1.86.5.1

An entry containing configuration information
for authentication algorithms, encryption
algorithms, Diffie-Helman group, exchange-mode
and lifetime-seconds to be used for
negotiation.

Indexes

No indexes recorded

Column	Syntax	OID
rcIkeV2ProfileName This object contains the name of this Profile.	OctetString Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.86.5.1.1
rcIkeV2ProfileHashAlgorithm This object specifies the hash algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - md5 bit 1 - sha bit 2 - sha256	Bitsr/w	.1.3.6.1.4.1.2272.1.86.5.1.2
rcIkeV2ProfileEncryptionAlgorithm This object specifies the encryption algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - desCbc bit 1 - tripleDesCbc bit 2 - aesCbc	Bitsr/w	.1.3.6.1.4.1.2272.1.86.5.1.3
rcIkeV2ProfileEncryptKeyLen This object specifies the key length that should be be used during IKE SA negotiation. It is represented in form of bits as follows- bit 0 - keylen-128 bit 1 - keylen-192 bit 2 - keylen-256	Bitsr/w	.1.3.6.1.4.1.2272.1.86.5.1.4
rcIkeV2ProfileDHGroup This object specifies the Diffie-Hellman groups that can be used during IKE SA negotiation. It is represented in form of bits as follows - bit 0 - modp768 bit 1 - modp1024 bit 2 - modp2048	Bitsr/w	.1.3.6.1.4.1.2272.1.86.5.1.5
rcIkeV2ProfileExchangeMode This object specifies the IKE negotiation mode. Only main mode is supported for this release.	Enumerationr/w	.1.3.6.1.4.1.2272.1.86.5.1.6
rcIkeV2ProfileLifetimeSeconds This object specifies the amount of time to propose an IKE SA remain valid during IKE negotiation. A value of 0 means no expiration.	Unsigned32r/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.86.5.1.7
rcIkeV2ProfileIntegrityAlgorithm This object specifies the integrity algorithms that can be used during IKE SA negotiation. It is represented in form of bits as follows - bit 0 - md5 bit 1 - sha1 bit 2 - sha256 bit 3 - aes-xcbc	Bitsr/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.86.5.1.8
rcIkeV2ProfileRowStatus This object is used to create or delete entries in this table.	SNMPv2-TCRowStatusr/w Enumerated Values: 0 none 1 mbps10 2 mbps100 Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.86.5.1.9

rcIkeV2SATable

table

.1.3.6.1.4.1.2272.1.86.6 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIkeV2SATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIkeV2SATable'

Copy

This table contains a list of IKE V2
Security Association entries.

rcIkeV2SAEntry row .1.3.6.1.4.1.2272.1.86.6.1

.

Indexes

No indexes recorded

Column	Syntax	OID
rcIkeV2SAId This object specifies the unique ID of a SA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.86.6.1.1
rcIkeV2SALocalIfIndex This object specifies the interface index of the local address. Only port and vlan if-index are supported for this release.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.86.6.1.2
rcIkeV2SALocalAddrType This object specifies the type of address field in the rcIkeActiveSALocalAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.6.1.3
rcIkeV2SALocalAddr This object specifies the string representation of the local peer ID. The type of value configured for this object is specified by the rcIkeV2SALocalAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.86.6.1.4
rcIkeV2SARemoteAddrType This object specifies the type of address field in the rcIkeV2SARemoteAddr. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Constraints: range: 0-128 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.86.6.1.5
rcIkeV2SARemoteAddr This object specifies the string representation of the remote peer ID. The type of value configured for this object is specified by the rcIkeV2SARemoteAddrType.	INET-ADDRESS-MIBInetAddress Enumerated Values: 1 cli 2 slip 3 ppp Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.86.6.1.6
rcIkeV2SAName This object specifies the name for the SA.	OctetString Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.86.6.1.7
rcIkeV2SAAuthenticationMethod This object specifies the proposed authentication method for the phase 1 security association. Only the Pre-Shared Key authentication method is supported in this release.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.86.6.1.8
rcIkeV2SADPDTimeout This object specifies the Dead Peer Detection timeout in seconds.	SNMPv2-SMIUnsigned32 Enumerated Values: 2400 baud2400 4800 baud4800 9600 baud9600 19200 baud19200 38400 baud38400 57600 baud57600 115200 baud115200 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.86.6.1.9
rcIkeV2SAHashAlgorithm This object specifies the hash algorithm negotiated for this IKEv2 SA.	Enumeration Enumerated Values: 1 seven 2 eight	.1.3.6.1.4.1.2272.1.86.6.1.10
rcIkeV2SAEncryptionAlgorithm This object specifies the encryption algorithm negotiated for this IKEv2 SA.	Enumeration	.1.3.6.1.4.1.2272.1.86.6.1.11
rcIkeV2SAEncryptKeyLen This object specifies the encryption key length negotiated for this IKE V2 SA.	Integer32	.1.3.6.1.4.1.2272.1.86.6.1.12
rcIkeV2SADHGroup This object specifies the Diffie-Hellman group negotiated for this IKE V2 SA.	Enumeration Constraints: range: 0-224	.1.3.6.1.4.1.2272.1.86.6.1.13
rcIkeV2SAExchangeMode This object specifies the IKE V2 SA mode.	Enumeration	.1.3.6.1.4.1.2272.1.86.6.1.14
rcIkeV2SALifetimeSeconds This object specifies the amount of time to propose an IKE V2 SA remain valid during IKE negotiation. A value of 0 means no expiration.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.86.6.1.15
rcIkeV2SAStatus This object specifies the amount of time to propose an IKE V2 SA remain valid during IKE V2 negotiation. A value of 0 means no expiration.	Enumeration Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.86.6.1.16
rcIkeV2SAInitiator This object specifies the whether the SA was created by an Initiator or a Responder	Enumeration	.1.3.6.1.4.1.2272.1.86.6.1.17
rcIkeV2SAIntegrityAlgorithm This object specifies the integrity algorithms that can be used during IKEv2 SA negotiation.	Enumeration	.1.3.6.1.4.1.2272.1.86.6.1.18

rcIsidServiceTable

table

.1.3.6.1.4.1.2272.1.87.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsidServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsidServiceTable'

Copy

A list of service instance entries. The number of
entries is given by rcIsidNumIsids.

rcIsidServiceEntry row .1.3.6.1.4.1.2272.1.87.2.1

Entry containing configuration information for a
particular Service entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsidServiceId A value that uniquely indentifies the service associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.87.2.1.1
rcIsidServiceType It represents the type of service associated with this entry.	Enumerationr/w	.1.3.6.1.4.1.2272.1.87.2.1.2
rcIsidServiceRowStatus Used to create/delete entries in the Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.87.2.1.3
rcIsidServiceMacLimitEnable Controls whether the mac-limit should be enabled. To enable, set this value to true. To disable, set this value to false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.87.2.1.4
rcIsidServiceMaxMacLimit A value used to indicate the maximum value of mac- address that can be learnt on a per service(i-sid) basis.	Integer32r/w	.1.3.6.1.4.1.2272.1.87.2.1.5
rcIsidServiceAction I-sid related actions.	Enumerationr/w Enumerated Values: 1 none 2 resetPcmcia 3 pcmciaStop 4 pcmciaStart	.1.3.6.1.4.1.2272.1.87.2.1.6
rcIsidServiceOrigin It represents the origin of this isid.	Enumeration Enumerated Values: 1 none 2 inProgress 3 success 4 fail	.1.3.6.1.4.1.2272.1.87.2.1.7
rcIsidServiceVnid A value that uniquely identifies the vxlan service associated with this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.87.2.1.8

rcIsidElanTransparentTable

table

.1.3.6.1.4.1.2272.1.87.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsidElanTransparentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsidElanTransparentTable'

Copy

A list of service instance entries of type elan-
transparent. This is created by rcIsidServiceEntry.

rcIsidElanTransparentEntry row .1.3.6.1.4.1.2272.1.87.3.1

Entry containing configuration information for a
particular Service entry of type elan-transparent.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsidElanTransparentId A value that uniquely identifies the service already created by rcIsidServiceTable.	Integer32	.1.3.6.1.4.1.2272.1.87.3.1.1
rcIsidElanTransparentPortMembers The set of ports that are members of this service type.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.87.3.1.2
rcIsidElanTransparentMltIds A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 which represents Mlt Id 512.	OctetStringr/w	.1.3.6.1.4.1.2272.1.87.3.1.3

rcIsidElanEndPointTable

table

.1.3.6.1.4.1.2272.1.87.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsidElanEndPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsidElanEndPointTable'

Copy

A list of elan end point entries.

rcIsidElanEndPointEntry row .1.3.6.1.4.1.2272.1.87.4.1

Entry containing configuration information for a
particular elan end point.

Indexes

No indexes recorded

Column	Syntax	OID
rcIsidElanEndPointIsid A value that uniquely identifies the i-sid of this elan end point.	Integer32	.1.3.6.1.4.1.2272.1.87.4.1.1
rcIsidElanEndPointCvid A value that uniquely identifies the customer vid of this elan end point. 4095 is not used. 4096 is reserved for untagged case	Integer32	.1.3.6.1.4.1.2272.1.87.4.1.2
rcIsidElanEndPointIfIndex The interface index for mlt or port of this elan end point.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.87.4.1.3
rcIsidElanEndPointRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.87.4.1.4
rcIsidElanEndPointBpdu set bpdu enable/disable for untagged end point. Disable to drop the bpdu, enable to forward the bpdu. Default is disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.87.4.1.5
rcIsidElanEndPointOrigin It represents the origin of service associated with this isid elan end point.	Enumeration Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.87.4.1.6

rcIsidInterfaceTable

table

.1.3.6.1.4.1.2272.1.87.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIsidInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIsidInterfaceTable'

Copy

A list of isid interface entries.

rcIsidInterfaceEntry row .1.3.6.1.4.1.2272.1.87.5.1

Entry containing information for a
particular isid interface (port/mlt).

Indexes

No indexes recorded

Column	Syntax	OID
rcIsidInterfaceIfIndex The interface index for this isid interface.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.87.5.1.1
rcIsidInterfaceIsid A value that uniquely identifies the i-sid of this isid interface.	Integer32	.1.3.6.1.4.1.2272.1.87.5.1.2
rcIsidInterfaceVlan A value that uniquely identifies the platform vlan of this isid interface.	Integer32	.1.3.6.1.4.1.2272.1.87.5.1.3
rcIsidInterfaceCvid A value that uniquely identifies the customer vid of this isid interface. 4095 is not used. 4096 is reserved for untagged case	Integer32 Constraints: range: 3-3 range: 5-6	.1.3.6.1.4.1.2272.1.87.5.1.4
rcIsidInterfaceType It represents the type of service associated with this isid interface.	Enumeration Constraints: range: 1-114	.1.3.6.1.4.1.2272.1.87.5.1.5
rcIsidInterfaceOrigin It represents the origin of service associated with this isid interface.	Enumeration Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.87.5.1.6
rcIsidInterfaceBpdu It represents bpdu for untagged isid interface. Disable is to drop the bpdu, enable is to forward the bpdu.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.87.5.1.7

rcMACSecCATable

table

.1.3.6.1.4.1.2272.1.88.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMACSecCATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMACSecCATable'

Copy

A Table which describes the Connectivity Associations 
in a System (VSP 4000/9000)

rcMACSecCAEntry row .1.3.6.1.4.1.2272.1.88.1.1

A conceptual row of rcMACSec Table

Indexes

rc2kDeviceFlash1FileSlot rc2kDeviceFlash1FileName

Column	Syntax	OID
rcMACSecConnectivityAssociationId A unique Id assigned to each connectivity association configured on the switch(VSP 4000/9000). This MIB element is used for internal logic only.	Integer32 Constraints: range: 5-6	.1.3.6.1.4.1.2272.1.88.1.1.1
rcMACSecConnectivityAssociationName A user configured name given to each Connectivity Association configured on the switch	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.88.1.1.2
rcMACSecConnectivityAssociationKey A pre shared, Connectivity Association Key associated with each connectivity association configured on the switch	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.88.1.1.3
rcMACSecConnectivityAssociationPortMembers The set of ports to which this connectivity association is associated with	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.88.1.1.4
rcMACSecConnectivityAssociationRowStatus Used to create and delete conceptual Rows of connectivity associations	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.88.1.1.5
rcMACSecConnectivityAssociationTxKeyParity Use Odd or Even Keys generated while programming in Switch Hardware	Enumerationr/w	.1.3.6.1.4.1.2272.1.88.1.1.6

rcMACSecIfConfigTable

table

.1.3.6.1.4.1.2272.1.88.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMACSecIfConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMACSecIfConfigTable'

Copy

Table which provides MACSec Configurations on a per port basis

rcMACSecIfConfigEntry row .1.3.6.1.4.1.2272.1.88.2.1

Conceptual Row of rcMACSecIfConfigTable

Indexes

No indexes recorded

Column	Syntax	OID
rcMACSecIfCAName Name of Connectivity Association attached to the port/interface	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.88.2.1.1
rcMACSecIfOffsetValue Using this parameter, Ipv4 + TCP/UDP header or Ipv6 + TCP/UDP header can be Offset from MACSec Encryption	Enumerationr/w	.1.3.6.1.4.1.2272.1.88.2.1.2
rcMACSecIfEncryptionEnable Encryption Status per port. Used to Enable/Disable Encryption for each macsec capable port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.88.2.1.3
rcMACSecIfClearStats Used to clear MACSec stats for a port. This will display always false when retrieved through SNMP Get.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.88.2.1.4

rc2kCpuEthernetPortTable

table

.1.3.6.1.4.1.2272.1.100.2 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCpuEthernetPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCpuEthernetPortTable'

Copy

2k CPU Ethernet Port table

rc2kCpuEthernetPortEntry row .1.3.6.1.4.1.2272.1.100.2.1

Entry containing information of 2k CPU Ethernet Port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCpuEthernetPortIfIndex IfIndex of the port.	InterfaceIndex Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.2.1.1
rc2kCpuEthernetPortDescr Port description	OctetString	.1.3.6.1.4.1.2272.1.100.2.1.2
rc2kCpuEthernetPortAdminStatus Used to configure the admininstrative status of the port.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.2.1.3
rc2kCpuEthernetPortOperStatus Used to indicate the administrative status of the port.	Enumeration	.1.3.6.1.4.1.2272.1.100.2.1.4
rc2kCpuEthernetPortAddr Used to configure the port's IP address	SNMPv2-SMIIpAddressr/w Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.100.2.1.5
rc2kCpuEthernetPortMask Used to configure the port's net mask	SNMPv2-SMIIpAddressr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.6
rc2kCpuEthernetPortGateway Used to configure the the IP address of the gateway that should be used to forward IP traffic.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.7
rc2kCpuEthernetPortNetwork Used to configure the network that can be used to remotely manage this device.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.8
rc2kCpuEthernetPortAutoNegotiate Used to configure auto-negotiation on this port.	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.2.1.9
rc2kCpuEthernetPortAdminDuplex Used to configure the administrative duplex setting for this port.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.10
rc2kCpuEthernetPortOperDuplex Used to indicate the operational duplex setting for this port.	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.11
rc2kCpuEthernetPortAdminSpeed Used to configure the administrative speed setting for this port.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.12
rc2kCpuEthernetPortOperSpeed Used to indicate the operational duplex setting for this port.	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.2.1.13
rc2kCpuEthernetPortEnableBootp Used to enable/disable the Bootp feature on this port.	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.2.1.14
rc2kCpuEthernetPortMgmtMacAddr Used to indicate the mac addr for this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.2.1.15

rc2kCpuSerialPortTable

table

.1.3.6.1.4.1.2272.1.100.3 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCpuSerialPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCpuSerialPortTable'

Copy

2k CPU Serial Port table

rc2kCpuSerialPortEntry row .1.3.6.1.4.1.2272.1.100.3.1

Entry containing information of 2k CPU Serial Port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCpuSerialPortIfIndex IfIndex for this port.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.3.1.1
rc2kCpuSerialPortDescr Port description.	OctetString	.1.3.6.1.4.1.2272.1.100.3.1.2
rc2kCpuSerialPortMode Used to configure the mode this port should operate in.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.3.1.3
rc2kCpuSerialPortAdminStatus Used to configure the administrative status setting for this port.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.3.1.4
rc2kCpuSerialPortOperStatus Used to indicate the operational status setting for this port.	Enumeration	.1.3.6.1.4.1.2272.1.100.3.1.5
rc2kCpuSerialPortBaudRate Used to configure the baud rate of this port.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.3.1.6
rc2kCpuSerialPortDataBits Used to configure the number of data bits, per byte of data, this port should send/receive.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.3.1.7
rc2kCpuSerialPortMyAddr Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes.	SNMPv2-SMIIpAddressr/w Constraints: range: 1-6	.1.3.6.1.4.1.2272.1.100.3.1.8
rc2kCpuSerialPortPeerAddr Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.100.3.1.9
rc2kCpuSerialPortSlipMtu Used to configure the MTU for this port. Used for slip only.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.3.1.10
rc2kCpuSerialPortSlipTxRxCompress Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only.	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.3.1.11
rc2kCpuSerialPortSlipRxCompress Used to enable/disable compression for receiving packets on this port. Used for slip only.	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.3.1.12
rc2kCpuSerialPortPppConfigFile Used to configure the configuration file to use for PPP.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.3.1.13

rc2kDeviceGlobalTable

table

.1.3.6.1.4.1.2272.1.100.4.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDeviceGlobalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDeviceGlobalTable'

Copy

2k CPU Ethernet Port table

rc2kDeviceGlobalEntry row .1.3.6.1.4.1.2272.1.100.4.1.1

Entry containing information of 2k CPU Ethernet Port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDeviceGlobalSlot slot number	Integer32	.1.3.6.1.4.1.2272.1.100.4.1.1.1
rc2kDeviceGlobalFlashBytesUsed bytes used	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.2
rc2kDeviceGlobalFlashBytesFree bytes free	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.3
rc2kDeviceGlobalFlashNumFiles # files in flash	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.4
rc2kDeviceGlobalPcmciaBytesUsed bytes used	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.4.1.1.5
rc2kDeviceGlobalPcmciaBytesFree bytes free	SNMPv2-SMIInteger32 Enumerated Values: 1 enable 2 disable Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.4.1.1.6
rc2kDeviceGlobalPcmciaNumFiles # files in pcmcia	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.4.1.1.7
rc2kDeviceGlobalAction none(1), resetPcmcia(2), ..	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.8
rc2kDeviceGlobalResult Used to indicate the result of the last action performed on one of the system's device.	Enumeration Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.9
rc2kDeviceGlobalFlash1BytesUsed bytes used	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.10
rc2kDeviceGlobalFlash1BytesFree bytes free	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.11
rc2kDeviceGlobalFlash1NumFiles # files in flash	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.12
rc2kDeviceGlobalUsbBytesUsed bytes used in USB	SNMPv2-SMICounter64 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.13
rc2kDeviceGlobalUsbBytesFree bytes free in USB	SNMPv2-SMICounter64 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.14
rc2kDeviceGlobalUsbNumFiles # files in USB	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.4.1.1.15
rc2kDeviceGlobalExtflashBytesUsed bytes used in Extflash	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.4.1.1.16
rc2kDeviceGlobalExtflashBytesFree bytes free in Extflash	SNMPv2-SMICounter64 Enumerated Values: 1 gen1 2 gen2 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.4.1.1.17
rc2kDeviceGlobalExtflashNumFiles # files in Extflash	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.4.1.1.18
rc2kDeviceGlobalIntflashBytesUsed bytes used in intflash. It is used to replace rc2kDeviceGlobalFlashBytesUsed	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.4.1.1.19
rc2kDeviceGlobalIntflashBytesFree bytes free in intflash. It is used to replace rc2kDeviceGlobalFlashByteFree	SNMPv2-SMICounter64 Enumerated Values: 1 jitc 2 disable 3 non-jitc Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.4.1.1.20

rc2kDeviceFlashFileTable

table

.1.3.6.1.4.1.2272.1.100.4.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDeviceFlashFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDeviceFlashFileTable'

Copy

2k Flash table

rc2kDeviceFlashFileEntry row .1.3.6.1.4.1.2272.1.100.4.3.1

Entry containing information of 2k CPU Serial Port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDeviceFlashFileSlot slot number	Integer32 Enumerated Values: 1 disable 2 high 3 low	.1.3.6.1.4.1.2272.1.100.4.3.1.1
rc2kDeviceFlashFileName name of file	OctetString	.1.3.6.1.4.1.2272.1.100.4.3.1.2
rc2kDeviceFlashFileDate date	OctetString	.1.3.6.1.4.1.2272.1.100.4.3.1.3
rc2kDeviceFlashFileSize size in bytes	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.4.3.1.4

rc2kDevicePcmciaFileTable

table

.1.3.6.1.4.1.2272.1.100.4.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDevicePcmciaFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDevicePcmciaFileTable'

Copy

2k PCMCIA table

rc2kDevicePcmciaFileEntry row .1.3.6.1.4.1.2272.1.100.4.5.1

Entry containing information of 2k CPU Serial Port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDevicePcmciaFileSlot slot number	Integer32	.1.3.6.1.4.1.2272.1.100.4.5.1.1
rc2kDevicePcmciaFileName name of file	OctetString	.1.3.6.1.4.1.2272.1.100.4.5.1.2
rc2kDevicePcmciaFileDate date	OctetString	.1.3.6.1.4.1.2272.1.100.4.5.1.3
rc2kDevicePcmciaFileSize size in bytes	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.100.4.5.1.4

rc2kDeviceFlash1FileTable

table

.1.3.6.1.4.1.2272.1.100.4.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDeviceFlash1FileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDeviceFlash1FileTable'

Copy

2k Flash1 table

rc2kDeviceFlash1FileEntry row .1.3.6.1.4.1.2272.1.100.4.8.1

Entry containing infomation of 2k Flash1 Files

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDeviceFlash1FileSlot slot number	Integer32 Enumerated Values: 1 up 2 down 3 testing 4 reset	.1.3.6.1.4.1.2272.1.100.4.8.1.1
rc2kDeviceFlash1FileName name of file	OctetString Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant	.1.3.6.1.4.1.2272.1.100.4.8.1.2
rc2kDeviceFlash1FileDate date	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.8.1.3
rc2kDeviceFlash1FileSize size in bytes	SNMPv2-SMIInteger32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.8.1.4

rc2kDeviceExtflashFileTable

table

.1.3.6.1.4.1.2272.1.100.4.9 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDeviceExtflashFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDeviceExtflashFileTable'

Copy

2k Flash table

rc2kDeviceExtflashFileEntry row .1.3.6.1.4.1.2272.1.100.4.9.1

Entry containing information of extflash files

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDeviceExtflashFileSlot slot number	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.9.1.1
rc2kDeviceExtflashFileName name of file	OctetString	.1.3.6.1.4.1.2272.1.100.4.9.1.2
rc2kDeviceExtflashFileDate date	OctetString Enumerated Values: 0 none 1 other 536969472 rc2kBackplane 538837248 rc2kSFM 546177280 rc2kBFM0 546177282 rc2kBFM2 546177283 rc2kBFM3 546177286 rc2kBFM6 546177288 rc2kBFM8 605946112 rc2kFSFM 613351682 rc2kDPM2 613351690 rc2kEDPM2 613351861 rc2kDPM1 613351863 rc2kDPM3 613351871 rc2kEDPM3 630128906 rc2kEEDPM2 630129087 rc2kEEDPM3 807272704 rc2kMGSFM 1888354564 rc2kBFM4	.1.3.6.1.4.1.2272.1.100.4.9.1.3
rc2kDeviceExtflashFileSize size in bytes	SNMPv2-SMIUnsigned32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.9.1.4

rc2kDeviceUsbFileTable

table

.1.3.6.1.4.1.2272.1.100.4.10 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kDeviceUsbFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kDeviceUsbFileTable'

Copy

2k Usb table

rc2kDeviceUsbFileEntry row .1.3.6.1.4.1.2272.1.100.4.10.1

Entry containing information of USB files

Indexes

No indexes recorded

Column	Syntax	OID
rc2kDeviceUsbFileSlot slot number	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.10.1.1
rc2kDeviceUsbFileName name of file	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.10.1.2
rc2kDeviceUsbFileDate date	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.4.10.1.3
rc2kDeviceUsbFileSize size in bytes	SNMPv2-SMIUnsigned32 Enumerated Values: 1 none 2 modemCard 3 ethernetCard 4 ataDisk Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.4.10.1.4

rc2kBootConfigTable

table

.1.3.6.1.4.1.2272.1.100.5 · 1 row entry · 57 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kBootConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kBootConfigTable'

Copy

2k Boot Configuration table

rc2kBootConfigEntry row .1.3.6.1.4.1.2272.1.100.5.1

Entry containing boot configuration information.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kBootConfigSlot slot number, VSP uses 1,2	Integer32	.1.3.6.1.4.1.2272.1.100.5.1.1
rc2kBootConfigLastBootConfigSource boot config source	OctetString	.1.3.6.1.4.1.2272.1.100.5.1.2
rc2kBootConfigLastRuntimeImageSource runtime image source	OctetString Enumerated Values: 1 unsupported 2 notpresent 3 present 4 running	.1.3.6.1.4.1.2272.1.100.5.1.3
rc2kBootConfigLastRuntimeConfigSource runtime config source	OctetString Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 failure	.1.3.6.1.4.1.2272.1.100.5.1.4
rc2kBootConfigPrimaryImageSource image source	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.5.1.5
rc2kBootConfigPrimaryConfigSource config source	OctetStringr/w Enumerated Values: 0 undefined 1 e0 2 e1 3 e2 4 e3 5 e4 6 e5 7 e6 8 e7	.1.3.6.1.4.1.2272.1.100.5.1.6
rc2kBootConfigSecondaryImageSource image source	OctetStringr/w Enumerated Values: 0 undefined 1 p120616 2 p120618 3 p120617 4 p120615 5 p120724 6 p120672 7 p120851 8 p120939	.1.3.6.1.4.1.2272.1.100.5.1.7
rc2kBootConfigSecondaryConfigSource config source	OctetStringr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.2272.1.100.5.1.8
rc2kBootConfigTertiaryImageSource image source	OctetStringr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.2272.1.100.5.1.9
rc2kBootConfigTertiaryConfigSource config source	OctetStringr/w Enumerated Values: 1 singleport 2 dualport	.1.3.6.1.4.1.2272.1.100.5.1.10
rc2kBootConfigEnableAutoBoot auto boot mode	SNMPv2-TCTruthValuer/w Enumerated Values: 1 on 2 off Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.11
rc2kBootConfigEnableFactoryDefaults use factory default	SNMPv2-TCTruthValuer/w Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.12
rc2kBootConfigEnableDebugMode debug mode	SNMPv2-TCTruthValuer/w Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.13
rc2kBootConfigEnableHwWatchDogTimer hw watch dog timer	SNMPv2-TCTruthValuer/w Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.14
rc2kBootConfigEnableRebootOnError reboot on error	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.15
rc2kBootConfigEnableTelnetServer telnet server	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.16
rc2kBootConfigEnableRloginServer rlogin server	SNMPv2-TCTruthValuer/w Constraints: range: 1-8 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.17
rc2kBootConfigEnableFtpServer ftp server	SNMPv2-TCTruthValuer/w Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.18
rc2kBootConfigEnableTftpServer tftp server	SNMPv2-TCTruthValuer/w Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.19
rc2kBootConfigSwVersion current sw version	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.5.1.20
rc2kBootConfigMulticastConfigProfile multicast config	Integer32	.1.3.6.1.4.1.2272.1.100.5.1.21
rc2kBootConfigEnableSshServer ssh server	SNMPv2-TCTruthValuer/w Enumerated Values: 1 modeSingle 2 mode100 Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.22
rc2kBootConfigEnableAltLed Boot flag for enableing Alternate LED	SNMPv2-TCTruthValuer/w Enumerated Values: 0 none 1 oneEight 2 oneQuarter 3 threeEight 4 halfSdram 5 fiveEight 6 threeQuarter 7 sevenEights 8 allSdram 9 notpresent Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.23
rc2kBootConfigPrimaryBackupConfigSource primary backup config source (safeconfig)	OctetStringr/w Enumerated Values: 0 none 1 oneEight 2 oneQuarter 3 threeEight 4 halfSdram 5 fiveEight 6 threeQuarter 7 sevenEights 8 allSdram 9 notpresent	.1.3.6.1.4.1.2272.1.100.5.1.24
rc2kBootConfigSecondaryBackupConfigSource secondary backup config source (safeconfig)	OctetStringr/w Enumerated Values: 1 modeSingle 2 mode100	.1.3.6.1.4.1.2272.1.100.5.1.25
rc2kBootConfigTertiaryBackupConfigSource tertiary backup config source (safeconfig)	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.100.5.1.26
rc2kBootConfigEnable8616ReAutoneg Enable re-autoneg for 8616SX Cards (Intel GMAC fix)	SNMPv2-TCTruthValuer/w Constraints: range: 0-100 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.27
rc2kBootConfigMezzImageSource Mezz image source	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.5.1.28
rc2kBootConfigEnableMezz Enable/disable Mezz Flag	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.29
rc2kBootConfigPrimaryLicenseSource primary license file name	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.5.1.30
rc2kBootConfigSecondaryLicenseSource secondary license file name	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.5.1.31
rc2kBootConfigTertiaryLicenseSource tertiary license file name	OctetStringr/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.5.1.32
rc2kBootConfigUnknownDstMacDiscardobsolete Enable/disable to discard the unknown destination mac address. A device reboot is required for the change to take effect.	SNMPv2-TCTruthValuer/w Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.33
rc2kBootConfigUnknownDstMacDiscardOperStatusobsolete Indicates the device operational status of unknown destination mac discard.	Enumeration	.1.3.6.1.4.1.2272.1.100.5.1.34
rc2kBootConfigEnableAutoAssignIp Enable/disable auto-assign-ip feature	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.35
rc2kBootConfigUpgradeBootImageSource Upgrade boot image source	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.100.5.1.36
rc2kBootConfigUpgradeRuntimeImageSource Upgrade runtime image source	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.100.5.1.37
rc2kBootConfigUpgradeMezzImageSource Upgrade mezz image source	OctetStringr/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.5.1.38
rc2kBootConfigUpgradeConfigSource Upgrade config source	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.5.1.39
rc2kBootConfigUpgradeRModImageSource upgrade RMod image source	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.5.1.40
rc2kBootConfigUpgradeRCModImageSource upgrade RCMod image source	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.5.1.41
rc2kBootConfigUpgradeESMImageSource upgrade ESM image source	OctetStringr/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.5.1.42
rc2kBootConfigFallBackBootImageSource upgrade fall-back boot monitor source	OctetStringr/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.5.1.43
rc2kBootConfigEnableCfPcCompat Enable/disable CF PC compatibility flag	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.44
rc2kBootConfigLinecardCompatibilityMode This indicates the admin compatibility mode of the IO cards on the Chassis. In gen1 mode, both the generation 1 cards and generation 2 (ROF) cards will be supported and the max number of FIB records will be set to…	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.5.1.45
rc2kBootConfigEnableSpbmConfigMode Enables spbm-config-mode	SNMPv2-TCTruthValuer/w Constraints: range: 1-8 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.46
rc2kBootConfigEnableIpv6Mode In VSP8200 IPv6 routes with prefix-length greater than 64 bits can be supported only when this flag is enabled.	SNMPv2-TCTruthValuer/w Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.47
rc2kBootConfigEnableEnhancedsecureMode Enable/disable Enhancedsecure Mode Flag	Enumerationr/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.100.5.1.48
rc2kBootConfigEnableUrpfMode From VOSS5.x onwards, unicast reverse path feature will be supported on small system platforms only if this flag is enabled. Configuring the Urpf Mode will result in config save and a reboot.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.49
rc2kBootConfigEnableFlowControlMode Enable/disable Flow Control Mode Flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.50
rc2kBootConfigAdvancedFeatureBwReservation Allow to enable the port forwarding bandwidth working as loopback ports to support advanced feature mode, or disable the reservation for full port mode. Enable can be in levels of high and low. In level of high, the sys…	Enumerationr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.100.5.1.51
rc2kBootConfigEnableVxlanGwFullInterworkingMode Enables vxlan gateway full interworking mode.	SNMPv2-TCTruthValuer/w Constraints: range: 0-32 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.52
rc2kBootConfigNniMstp Flag to decide whether configuration of mstp and other vlans on the NNI is allowed, default is not allowed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.53
rc2kBootConfigEnableDvrLeafMode DVR can be configured as controller or leaf. IP related configuration and show commands are not allowed on leaf. dvr-leaf-mode flag has to be enabled first before user can configure as DVR leaf. When boot up with this …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.54
rc2kBootConfigEnablevrfScaling Flag to Enable or Disable vrf scaling.	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.55
rc2kBootConfigLinerateDirectedBroadcast Flag to Enable or Disable Linerate Directed Broadcast. With this flag set, IP directed broadcast will operate at linerate. Without this flag, all IP directed broadcast is handled in legacy mode by the CP and is limited …	SNMPv2-TCTruthValuer/w Constraints: range: 6-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.56
rc2kBootConfigEnableSyslogRfc5424Format Flag to enable or disable the syslog output format. Enable will align syslog format with RFC 5424.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.5.1.59

rc2kCardTable

table

.1.3.6.1.4.1.2272.1.100.6 · 1 row entry · 35 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCardTable'

Copy

2k Card table

rc2kCardEntry row .1.3.6.1.4.1.2272.1.100.6.1

Entry containing information of 2k Card

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCardIndex slot number.	Integer32	.1.3.6.1.4.1.2272.1.100.6.1.1
rc2kCardFrontType Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: | 6 | 1 | 5 | 4 …	Enumeration	.1.3.6.1.4.1.2272.1.100.6.1.2
rc2kCardFrontDescription description	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.3
rc2kCardFrontAdminStatus Used to indicate the administrative status of this card	Enumerationr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.100.6.1.4
rc2kCardFrontOperStatus Used to indicate the operational status of this card.	Enumeration Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.100.6.1.5
rc2kCardFrontSerialNum manufacturer serial number of card	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.100.6.1.6
rc2kCardFrontHwVersion hardware version	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.6.1.7
rc2kCardFrontPartNumber manufacturer part number of card	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.8
rc2kCardFrontDateCode manufacturer date code	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.9
rc2kCardFrontDeviations deviations	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.6.1.10
rc2kCardFrontMacAddr base mac address	SNMPv2-TCMacAddress Constraints: range: 0-7 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.6.1.11
rc2kCardBackType Refer to rc2kCardFrontType for the encoding scheme	Enumeration Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.100.6.1.12
rc2kCardBackDescription customer card description	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.100.6.1.13
rc2kCardBackSerialNum customer serial number of card	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.14
rc2kCardBackHwVersion hardware version	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.15
rc2kCardBackPartNumber customer part number	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.6.1.16
rc2kCardBackDateCode customer date code	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.6.1.17
rc2kCardBackDeviations customer deviations	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.6.1.18
rc2kCardPCMCIAType Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none(1).	Enumeration	.1.3.6.1.4.1.2272.1.100.6.1.19
rc2kCardPCMCIADescr PCMCIA descriptor	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.20
rc2kCardASICDescr ASIC descriptor	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.6.1.21
rc2kCardFrontMasterIO Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices.	SNMPv2-TCTruthValue Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.6.1.22
rc2kCardSmltOnSingleCpSupported Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not.	SNMPv2-TCTruthValue Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.6.1.23
rc2kCardMezzCard Used to indicate the CPU Mezz card	Enumeration	.1.3.6.1.4.1.2272.1.100.6.1.24
rc2kCardFrontPoeOperStatus Used to indicate the operational status of this card.	Enumeration	.1.3.6.1.4.1.2272.1.100.6.1.25
rc2kCardMezzSerialNum Used to get the serial number of the mezz	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.100.6.1.26
rc2kCardMezzHwVersion Used to get the HW version of the mezz. The value of HW Version corresponds to the value of part number.	Enumeration Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.6.1.27
rc2kCardMezzPartNum Used to get the part number of the mezz. The value of part number corresponds to the value of HW Version.	Enumeration Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.6.1.28
rc2kCardSlotPriority Used to indicate the priority of the slot for power management. It will take effect only after reboot.	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.6.1.29
rc2kCardSlotOriginalPriority Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot.	Enumeration	.1.3.6.1.4.1.2272.1.100.6.1.30
rc2kCardMode Used to indicate the single port or dual port is using	Enumerationr/w Enumerated Values: 1 green 2 yellow 3 red 4 uncolored	.1.3.6.1.4.1.2272.1.100.6.1.31
rc2kCardSlotPower Administrately turn on or off power on this slot. it only applicable on Standby CP & IO and SF Card	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.6.1.32
rc2kCardModuleSerialNum Module serial number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.6.1.33
rc2kCardModulePartNumber Module part number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.34
rc2kCardModuleAssemblyDate Module assemly date. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP	OctetString	.1.3.6.1.4.1.2272.1.100.6.1.35

rc2kQosQosTable

table

.1.3.6.1.4.1.2272.1.100.8.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosQosTable'

Copy

This table is used to define the Quality Of
Service(QOS) profiles for the system.  The system 
can support eight different QOS levels.  Each QOS
level can be individually configured.

rc2kQosQosEntry row .1.3.6.1.4.1.2272.1.100.8.1.1

QOS profile entry.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosQosRow Used to uniquely identify a row in this table.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.8.1.1.1
rc2kQosQosLevel QOS level	Integer32	.1.3.6.1.4.1.2272.1.100.8.1.1.2
rc2kQosQosName Qos level name	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.8.1.1.3
rc2kQosQosAdminWeight Administrative transmit opportunity percentage	SNMPv2-SMIInteger32r/w Enumerated Values: 1 green 2 yellow 3 red 4 uncolored Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.8.1.1.4
rc2kQosQosOperWeight Operational transmit opportunity percentage	SNMPv2-SMIInteger32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.8.1.1.5
rc2kQosOctapidModeobsolete Octapid mode	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.8.1.1.6
rc2kQosQosAdminThreshold Administrative queue threshold	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.8.1.1.7
rc2kQosQosOperThreshold Operational queue threshold	Enumeration	.1.3.6.1.4.1.2272.1.100.8.1.1.8
rc2kQosPidMode Pid mode	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.8.1.1.9
rc2kQosQosDropThresholdPercentage The threshold percentage for QoS trap timer for a particular queuing class	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.1.1.10
rc2kQosQosDropActualPercentage The actual page drop percentage on a queue	Integer32	.1.3.6.1.4.1.2272.1.100.8.1.1.11
rc2kQosQosDropTrapState Disable/enable page drop traps for a particular queuing class	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.100.8.1.1.12

rc2kQosIngressTagToQosTable

table

.1.3.6.1.4.1.2272.1.100.8.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosIngressTagToQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosIngressTagToQosTable'

Copy

This table is used to specify the 802.1P
to QOS (802.1P->QOS) mapping on packet 
ingress.

rc2kQosIngressTagToQosEntry row .1.3.6.1.4.1.2272.1.100.8.2.1

Entry containing information of 8021P->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosIngressTagToQosRow Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.100.8.2.1.1
rc2kQosIngressTagToQosInIeee8021P 802.1P	Integer32	.1.3.6.1.4.1.2272.1.100.8.2.1.2
rc2kQosIngressTagToQosQosLevel Qos level	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.2.1.3

rc2kQosIngressDsFieldToQosTable

table obsolete

.1.3.6.1.4.1.2272.1.100.8.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosIngressDsFieldToQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosIngressDsFieldToQosTable'

Copy

This table is used to specify the DSCP
field to QOS (DsField->QOS) mapping on
packet ingress.

rc2kQosIngressDsFieldToQosEntry row .1.3.6.1.4.1.2272.1.100.8.3.1

Entry containing information of DsField->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosIngressDsFieldToQosRowobsolete Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.100.8.3.1.1
rc2kQosIngressDsFieldToQosInDsFieldobsolete diffserv dsField	Integer32	.1.3.6.1.4.1.2272.1.100.8.3.1.2
rc2kQosIngressDsFieldToQosQosLevelobsolete qos level	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.3.1.3

rc2kQosEgressQosToTagTable

table

.1.3.6.1.4.1.2272.1.100.8.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressQosToTagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressQosToTagTable'

Copy

This table is used to specify the QOS to
802.1P (QOS->802.1P) mapping on packet
egress.

rc2kQosEgressQosToTagEntry row .1.3.6.1.4.1.2272.1.100.8.4.1

Entry containing information of Qos->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressQosToTagRow Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.100.8.4.1.1
rc2kQosEgressQosToTagQosLevel qos level	Integer32	.1.3.6.1.4.1.2272.1.100.8.4.1.2
rc2kQosEgressQosToTagOutIeee8021P 802.1P	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.4.1.3

rc2kQosEgressQosToDsFieldTable

table obsolete

.1.3.6.1.4.1.2272.1.100.8.5 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressQosToDsFieldTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressQosToDsFieldTable'

Copy

This table is used to specify the QOS to
DSCP field (QOS->DsField) mapping on packet
egress.

rc2kQosEgressQosToDsFieldEntry row .1.3.6.1.4.1.2272.1.100.8.5.1

Entry containing information of Qos->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressQosToDsFieldRowobsolete Used to uniquely identify a row in this table.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.8.5.1.1
rc2kQosEgressQosToDsFieldQosLevelobsolete qos level	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.8.5.1.2
rc2kQosEgressQosToDsFieldOutDsFieldobsolete diffserv dsField	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.5.1.3

rc2kQosTrafficProfileTable

table

.1.3.6.1.4.1.2272.1.100.8.6 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosTrafficProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosTrafficProfileTable'

Copy

This table is used to specify traffic profiles 
for the system.  These traffic profiles are
used for policying purposes to guarantee streams
of traffic do not egress the system above a
certain rate.  These traffic profiles are applied
in the 'rcIpFilterTable'.

rc2kQosTrafficProfileEntry row .1.3.6.1.4.1.2272.1.100.8.6.1

Entry containing information of Qos->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosTrafficProfileId Profile id	Integer32 Constraints: range: 0-3	.1.3.6.1.4.1.2272.1.100.8.6.1.1
rc2kQosTrafficProfileName Profile name	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.8.6.1.2
rc2kQosTrafficProfileEnable Enable this entry	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.6.1.3
rc2kQosTrafficProfileTranslateDscpEnable Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.6.1.4
rc2kQosTrafficProfileInProfileDscp Used to specify the DSCP value for 'good' packets.	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.8.6.1.5
rc2kQosTrafficProfileOutProfileDscp Used to specify the DSCP value for 'violation' packets.	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.8.6.1.6
rc2kQosTrafficProfileDiscardEnable Used to specify whether packets that fall outside the traffic profile should be discarded.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.6.1.7
rc2kQosTrafficProfileAverageRate Average rate in packets per second.	SNMPv2-SMIInteger32r/w Constraints: range: 1-5	.1.3.6.1.4.1.2272.1.100.8.6.1.8
rc2kQosTrafficProfilePeakRateobsolete Peak rate in packets per second.	SNMPv2-SMIInteger32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.8.6.1.9
rc2kQosTrafficProfileRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.8.6.1.10

rc2kQosIngressDscpToQosTable

table

.1.3.6.1.4.1.2272.1.100.8.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosIngressDscpToQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosIngressDscpToQosTable'

Copy

This table is used to specify the DSCP to
QOS (Dscp->QOS) mapping on packet ingress.

rc2kQosIngressDscpToQosEntry row .1.3.6.1.4.1.2272.1.100.8.7.1

Entry containing information of Dscp->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosIngressDscpToQosRow Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.100.8.7.1.1
rc2kQosIngressDscpToQosInDscp A 6-bit value used to define the Differentiated Service Code Point(DSCP).	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.2272.1.100.8.7.1.2
rc2kQosIngressDscpToQosInDscpBinaryFormat The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order).	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.100.8.7.1.3
rc2kQosIngressDscpToQosQosLevel qos level	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.100.8.7.1.4

rc2kQosEgressQosToDscpTable

table

.1.3.6.1.4.1.2272.1.100.8.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressQosToDscpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressQosToDscpTable'

Copy

This table is used to specify the QOS to
DSCP field (QOS->DsField) mapping on packet
egress.

rc2kQosEgressQosToDscpEntry row .1.3.6.1.4.1.2272.1.100.8.8.1

Entry containing information of Qos->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressQosToDscpRow Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.100.8.8.1.1
rc2kQosEgressQosToDscpQosLevel qos level	Integer32	.1.3.6.1.4.1.2272.1.100.8.8.1.2
rc2kQosEgressQosToDscpOutDscp A 6-bit value used to define the Differentiated Service Code Point(DSCP).	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.8.1.3
rc2kQosEgressQosToDscpOutDscpBinaryFormat The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order).	OctetString	.1.3.6.1.4.1.2272.1.100.8.8.1.4

rc2kQosEgressGreenColorQosToTagTable

table

.1.3.6.1.4.1.2272.1.100.8.9 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressGreenColorQosToTagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressGreenColorQosToTagTable'

Copy

This table is used to specify the green color
QOS to 802.1P (QOS -> 802.1P) mapping on packet 
egress.

rc2kQosEgressGreenColorQosToTagEntry row .1.3.6.1.4.1.2272.1.100.8.9.1

Entry containing infomation of Qos -> Qos mapping
for green colored packets.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressGreenColorQosToTagRow Used to uniquely identify a row in this table.	Integer32 Enumerated Values: 1 smf 2 mmf 3 ds3	.1.3.6.1.4.1.2272.1.100.8.9.1.1
rc2kQosEgressGreenColorQosToTagQosLevel Qos level	Integer32	.1.3.6.1.4.1.2272.1.100.8.9.1.2
rc2kQosEgressGreenColorQosToTagOutIeee8021P 802.1P. This value shows the Pbit mapping with Qos level on the egress packet	Integer32r/w Enumerated Values: 1 sonet 2 sdh 3 ds3CbitAdm 4 ds3CbitPlcp 5 ds3M23Adm 6 ds3M23Plcp	.1.3.6.1.4.1.2272.1.100.8.9.1.3

rc2kQosEgressYellowColorQosToTagTable

table

.1.3.6.1.4.1.2272.1.100.8.10 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressYellowColorQosToTagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressYellowColorQosToTagTable'

Copy

This table is used to specify the yellow color
QOS to 802.1P (QOS -> 802.1P) mapping on packet 
egress.

rc2kQosEgressYellowColorQosToTagEntry row .1.3.6.1.4.1.2272.1.100.8.10.1

Entry containing infomation of Qos -> Qos mapping
for Yellow colored packets.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressYellowColorQosToTagRow Used to uniquely identify a row in this table.	Integer32 Enumerated Values: 1 off 2 internal 3 external 4 ds3PayloadLoop 5 ds3DiagLoop 6 ds3LineLoop	.1.3.6.1.4.1.2272.1.100.8.10.1.1
rc2kQosEgressYellowColorQosToTagQosLevel Qos level	Integer32	.1.3.6.1.4.1.2272.1.100.8.10.1.2
rc2kQosEgressYellowColorQosToTagOutIeee8021P 802.1P, The value shows the Pbit Mapping with the Qos level on Egress packet	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.10.1.3

rc2kQosEgressRedColorQosToTagTable

table

.1.3.6.1.4.1.2272.1.100.8.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressRedColorQosToTagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressRedColorQosToTagTable'

Copy

This table is used to specify the red color
QOS to 802.1P (QOS -> 802.1P) mapping on packet 
egress.

rc2kQosEgressRedColorQosToTagEntry row .1.3.6.1.4.1.2272.1.100.8.11.1

Entry containing infomation of Qos -> Qos mapping
for red colored packets.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressRedColorQosToTagRow Used to uniquely identify a row in this table.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.100.8.11.1.1
rc2kQosEgressRedColorQosToTagQosLevel Qos level	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.100.8.11.1.2
rc2kQosEgressRedColorQosToTagOutIeee8021P 802.1P. The value shows the Pbit mapping with the Qos level of Egress packet	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.11.1.3

rc2kQosWredThresholdHighDropTable

table

.1.3.6.1.4.1.2272.1.100.8.12.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosWredThresholdHighDropTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosWredThresholdHighDropTable'

Copy

This table is used to specify the WRED drop 
thresholds for High Drop Curve Set

rc2kQosWredThresholdHighDropEntry row .1.3.6.1.4.1.2272.1.100.8.12.1.1

Entry containing information for different Qmin
and Qmax for High Drop Curve Set

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosWredThresholdHighDropColor Colored Queue for WRED Threshold High Drop Curve Set.	Enumeration Enumerated Values: 1 ubr 2 vbr	.1.3.6.1.4.1.2272.1.100.8.12.1.1.1
rc2kQosWredThresholdHighDropQmin Minimum drop threshold.	Integer32r/w Constraints: range: 86-733490	.1.3.6.1.4.1.2272.1.100.8.12.1.1.2
rc2kQosWredThresholdHighDropQmax Maximum drop threshold.	Integer32r/w Constraints: range: 86-733490	.1.3.6.1.4.1.2272.1.100.8.12.1.1.3

rc2kQosWredThresholdMediumDropTable

table

.1.3.6.1.4.1.2272.1.100.8.12.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosWredThresholdMediumDropTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosWredThresholdMediumDropTable'

Copy

This table is used to specify the WRED drop
thresholds for Medium Drop Curve Set

rc2kQosWredThresholdMediumDropEntry row .1.3.6.1.4.1.2272.1.100.8.12.2.1

Entry containing information for different Qmin
and Qmax for Medium Drop Curve Set

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosWredThresholdMediumDropColor Colored Queue for WRED Threshold Medium Drop Curve Set.	Enumeration	.1.3.6.1.4.1.2272.1.100.8.12.2.1.1
rc2kQosWredThresholdMediumDropQmin Minimum drop threshold.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.100.8.12.2.1.2
rc2kQosWredThresholdMediumDropQmax Maximum drop threshold.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.100.8.12.2.1.3

rc2kQosWredThresholdLowDropTable

table

.1.3.6.1.4.1.2272.1.100.8.12.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosWredThresholdLowDropTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosWredThresholdLowDropTable'

Copy

This table is used to specify the WRED drop 
thresholds for Low Drop Curve Set

rc2kQosWredThresholdLowDropEntry row .1.3.6.1.4.1.2272.1.100.8.12.3.1

Entry containing information for different
Qmin and Qmax for Low Drop Curve Set

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosWredThresholdLowDropColor Colored Queue for WRED Threshold Low Drop Curve Set.	Enumeration	.1.3.6.1.4.1.2272.1.100.8.12.3.1.1
rc2kQosWredThresholdLowDropQmin Minimum drop threshold.	Integer32r/w Enumerated Values: 1 notManaged 2 downVerify 3 down 4 upVerify 5 up	.1.3.6.1.4.1.2272.1.100.8.12.3.1.2
rc2kQosWredThresholdLowDropQmax Maximum drop threshold.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.12.3.1.3

rc2kQosStatsTable

table

.1.3.6.1.4.1.2272.1.100.8.14 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosStatsTable'

Copy

This table contains Qos statistic of the for all interface. 
Which includes Pbit Tx and drop by pages in 8 Qos level

rc2kQosStatsEntry row .1.3.6.1.4.1.2272.1.100.8.14.1

Qos Statistics table entry contain the pbit Tx and dorp of a interface

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosStatsIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.8.14.1.1
rc2kQosStatsTxPbit0Pages Number of Pages Transmitted for p-bit 0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.2
rc2kQosStatsDrPbit0Pages Number of Pages Dropped for p-bit 0	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.3
rc2kQosStatsTxPbit1Pages Number of Pages Transmitted for p-bit 1	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.4
rc2kQosStatsDrPbit1Pages Number of Pages Dropped for p-bit 1	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.100.8.14.1.5
rc2kQosStatsTxPbit2Pages Number of Pages Transmitted for p-bit 2	SNMPv2-SMICounter64 Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.100.8.14.1.6
rc2kQosStatsDrPbit2Pages Number of Pages Dropped for p-bit 2	SNMPv2-SMICounter64 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.100.8.14.1.7
rc2kQosStatsTxPbit3Pages Number of Pages Transmitted for p-bit 3	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.8
rc2kQosStatsDrPbit3Pages Number of Pages Dropped for p-bit 3	SNMPv2-SMICounter64 Enumerated Values: 1 bridged 2 ip 3 ipx 4 muxIpIpx Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.9
rc2kQosStatsTxPbit4Pages Number of Pages Transmitted for p-bit 4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.10
rc2kQosStatsDrPbit4Pages Number of Pages Dropped for p-bit 4	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.11
rc2kQosStatsTxPbit5Pages Number of Pages Transmitted for p-bit 5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.12
rc2kQosStatsDrPbit5Pages Number of Pages Dropped for p-bit 5	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.13
rc2kQosStatsTxPbit6Pages Number of Pages Transmitted for p-bit 6	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.14
rc2kQosStatsDrPbit6Pages Number of Pages Dropped for p-bit 6	SNMPv2-SMICounter64 Constraints: range: 0-60	.1.3.6.1.4.1.2272.1.100.8.14.1.15
rc2kQosStatsTxPbit7Pages Number of Pages Transmitted for p-bit 7	SNMPv2-SMICounter64 Enumerated Values: 1 llc 2 snap 3 ether-ii 4 raw Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.14.1.16
rc2kQosStatsDrPbit7Pages Number of Pages Dropped for p-bit 7	SNMPv2-SMICounter64 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.100.8.14.1.17

rc2kQosEgressQosPCPTable

table

.1.3.6.1.4.1.2272.1.100.8.18 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosEgressQosPCPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosEgressQosPCPTable'

Copy

This table is used to specify 
the Priority Code Point table.

rc2kQosEgressQosPCPEntry row .1.3.6.1.4.1.2272.1.100.8.18.1

Entry containing information of PCP Table

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosEgressQosPCPRow Used to uniquely identify a row in this table.	Integer32 Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.100.8.18.1.1
rc2kQosEgressQosPCPLevel Qos level	Integer32	.1.3.6.1.4.1.2272.1.100.8.18.1.2
rc2kQosEgressQosPCPInProfileIeee8021P In Profile 802.1P	Integer32	.1.3.6.1.4.1.2272.1.100.8.18.1.3
rc2kQosEgressQosPCPOutOfProfileIeee8021P Out Of Profile 802.1P	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.100.8.18.1.4

rc2kQosFabricInterfaceStatsTable

table

.1.3.6.1.4.1.2272.1.100.8.24 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosFabricInterfaceStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosFabricInterfaceStatsTable'

Copy

rc2kQosFabricInterfaceStatsEntry row .1.3.6.1.4.1.2272.1.100.8.24.1

A Fabric Interface Drop Statistics table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosFabricInterfaceStatsSlotNumber Slot Number	Integer32	.1.3.6.1.4.1.2272.1.100.8.24.1.1
rc2kQosFabricInterfaceStatsLaneNumber Lane number. 0 - Left, 1 - Middle, 2 - Right.	Integer32 Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.100.8.24.1.2
rc2kQosFabricInterfaceStatsFOQDropEvents Count of FOQ drop events occurred in this drop-trap time period.	SNMPv2-SMICounter64 Constraints: range: 3-15	.1.3.6.1.4.1.2272.1.100.8.24.1.3
rc2kQosFabricInterfaceStatsFOQTotalDropEvents Total count of FOQ drop events	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.24.1.4
rc2kQosFabricInterfaceStatsFabricDropEvents Count of Fabric drop events occurred in this drop-trap time period.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.24.1.5
rc2kQosFabricInterfaceStatsFabricTotalDropEvents Total count of Fabric drop events	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.8.24.1.6

rc2kQosQueueProfileTable

table

.1.3.6.1.4.1.2272.1.100.8.25 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosQueueProfileTable'

Copy

This table is used to specify queue profiles
for the ports to which the profiles will be linked to.
These queue profiles are used for shaping the egress
queues of the port by specifying the transmit opportunity
 percentages and rate-limit percentages for each of Tx queues.

rc2kQosQueueProfileEntry row .1.3.6.1.4.1.2272.1.100.8.25.1

Entry containing information of port egress queue shaping

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosQueueProfileId A value that uniquely identifies Queue Profile.	Integer32	.1.3.6.1.4.1.2272.1.100.8.25.1.1
rc2kQosQueueProfileName An administratively-assigned name for this Queue Profile.	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.8.25.1.2
rc2kQosQueueProfileApply When apply is issued by the administrator, the Queue Profile attributes are committed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.25.1.3
rc2kQosQueueProfileRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.8.25.1.4

rc2kQosQueueTable

table

.1.3.6.1.4.1.2272.1.100.8.26 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kQosQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kQosQueueTable'

Copy

This table is used to specify egress queue 
Weight values  and rate-limit enabled/disabled status
for a particular Tx queue under a specific Queue Profile.

rc2kQosQueueEntry row .1.3.6.1.4.1.2272.1.100.8.26.1

Entry containing information of egress queue shaping parameters

Indexes

No indexes recorded

Column	Syntax	OID
rc2kQosQueuePId Queue Profile ID under which this queue parameters are set.	Integer32	.1.3.6.1.4.1.2272.1.100.8.26.1.1
rc2kQosQueueId Tx Queue id for which the qos queue parameters are set.	Integer32	.1.3.6.1.4.1.2272.1.100.8.26.1.2
rc2kQosQueueAdminWeight Administrative transmit opportunity percentage for this queue	Integer32r/w	.1.3.6.1.4.1.2272.1.100.8.26.1.3
rc2kQosQueueOperWeight Operational transmit opportunity percentage for this queue	Integer32	.1.3.6.1.4.1.2272.1.100.8.26.1.4
rc2kQosQueueAdminRateLimitStatus Administrative rate limit status for this queue	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.26.1.5
rc2kQosQueueOperRateLimitStatus Operational rate limit staus for this queue	SNMPv2-TCTruthValue Constraints: range: 0-2147483647 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.8.26.1.6

rc2kAtmPortTable

table

.1.3.6.1.4.1.2272.1.100.9.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtmPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtmPortTable'

Copy

ATM port table

rc2kAtmPortEntry row .1.3.6.1.4.1.2272.1.100.9.2.1

Entry containing information of ATM port

Indexes

No indexes recorded

Column	Syntax	OID
rc2kAtmPortIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.9.2.1.1
rc2kAtmPortNumVpiBits # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.2.1.2
rc2kAtmPortNumVciBits # of vci bits	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.2.1.3
rc2kAtmPortMediaType media type	Enumeration	.1.3.6.1.4.1.2272.1.100.9.2.1.4
rc2kAtmPortScrambleEnable enable scramble	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.9.2.1.5
rc2kAtmPortFramingMode port framing mode	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.2.1.6
rc2kAtmPortClockSource clock source	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.2.1.7
rc2kAtmPortLineSpeed line speed	Enumeration	.1.3.6.1.4.1.2272.1.100.9.2.1.8
rc2kAtmPortLoopBackMode loop back mode	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.2.1.9
rc2kAtmPortMacAddress XLR assigned MAC addr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.9.2.1.10

rc2kAtmPvcTable

table

.1.3.6.1.4.1.2272.1.100.9.3 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtmPvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtmPvcTable'

Copy

ATM Pvc table

rc2kAtmPvcEntry row .1.3.6.1.4.1.2272.1.100.9.3.1

Entry containing information of ATM Pvc

Indexes

No indexes recorded

Column	Syntax	OID
rc2kAtmPvcIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.9.3.1.1
rc2kAtmPvcVpi vpi of this pvc	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.100.9.3.1.2
rc2kAtmPvcVci vci of this pvc	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.2272.1.100.9.3.1.3
rc2kAtmPvcPvcId internal pvc id	SNMPv2-SMIInteger32 Enumerated Values: 1 other 541327874 rc2k2xOc3PosBaseMMF 541331970 rc2k2xOc3PosBaseSMF 541393409 rc2k1xOc12PosBaseMMF 541397505 rc2k1xOc12PosBaseSMF 542376452 rc2k4xOc3cBaseMM 542380548 rc2k4xOc3cBaseSM 542388740 rc2k4xOc3cBaseCOPPER 542441985 rc2k1x0c12cBaseMM 542446081 rc2k1x0c12cBaseSM 542839298 rc2k2xE3 542970370 rc2k2xDs3 807469572 rc2k4x100BaseTX 808518146 rc2k2x100BaseFX 808518148 rc2k4x100BaseFX 808583681 rc2k1x1000BaseSXBB 808591873 rc2k1x1000BaseLXBB 808616449 rc2k1x1000BaseSXRBB 808624641 rc2k1x1000BaseLXRBB Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.9.3.1.4
rc2kAtmPvcName name of pvc	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.9.3.1.5
rc2kAtmPvcEncapsulation encapsulation	Enumerationr/w Enumerated Values: 0 up 1 down 2 testing 3 unknown	.1.3.6.1.4.1.2272.1.100.9.3.1.6
rc2kAtmPvcServiceType service type	Enumerationr/w Enumerated Values: 0 up 1 down 2 testing 3 unknown	.1.3.6.1.4.1.2272.1.100.9.3.1.7
rc2kAtmPvcPeakCellRate Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.8
rc2kAtmPvcSustainedCellRate Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.9
rc2kAtmPvcMaxBurstSize max burst size	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.10
rc2kAtmPvcRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.9.3.1.11
rc2kAtmPvcOamLbMgmtEnable Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.9.3.1.12
rc2kAtmPvcOamLbSendFrequency Number of seconds between transmitting OAM loopback request	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.13
rc2kAtmPvcOamLbRetryFrequency Number of seconds between retry	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.14
rc2kAtmPvcOamLbUpCount Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.15
rc2kAtmPvcOamLbDownCount Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down.	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.3.1.16
rc2kAtmPvcOamTrapEnable Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.9.3.1.17
rc2kAtmPvcOamVcStatus Indicate the status of PVC link. Not Managed--VC is not being managed by OAM. Down Verify --An OAM loopback failed. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really down. Afte…	Enumeration	.1.3.6.1.4.1.2272.1.100.9.3.1.18
rc2kAtmPvcOamLbRequestSent Number of OAM loopback request sent	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.3.1.19
rc2kAtmPvcOamLbReplySent Number of OAM loopback reply sent	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.3.1.20
rc2kAtmPvcOamLbReplyReceived Number of OAM loopback reply received	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.3.1.21

rc2kAtm1483ElanTable

table

.1.3.6.1.4.1.2272.1.100.9.5 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtm1483ElanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtm1483ElanTable'

Copy

ATM 1483Elan table

rc2kAtm1483ElanEntry row .1.3.6.1.4.1.2272.1.100.9.5.1

Entry containing information of ATM 1483Elan

Indexes

rc2kCpuEthernetPortIpv6RouteNetwork rc2kCpuEthernetPortIpv6RoutePrefixLength rc2kCpuEthernetPortIpv6RouteGateway

Column	Syntax	OID
rc2kAtm1483ElanIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.9.5.1.1
rc2kAtm1483ElanElanId Elan Id	SNMPv2-SMIInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.100.9.5.1.2
rc2kAtm1483ElanNumPvcIds # pvc-ids in list	Integer32	.1.3.6.1.4.1.2272.1.100.9.5.1.3
rc2kAtm1483ElanPvcIds list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids.	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.9.5.1.4
rc2kAtm1483ElanVlanId vlan tag for this 1483	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.5.1.5
rc2kAtm1483ElanRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.9.5.1.6
rc2kAtm1483ElanConnectType connection type	Enumerationr/w Constraints: range: 1-11	.1.3.6.1.4.1.2272.1.100.9.5.1.7
rc2kAtm1483ElanVlanMacAddress mac for vlan	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.9.5.1.8
rc2kAtm1483ElanDummyMacAddress dummy mac for the other router	SNMPv2-TCMacAddress Enumerated Values: 1 other 1627259136 cpu56 1627263232 cpur 1627267328 lc Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.9.5.1.9
rc2kAtm1483ElanLocalIpAddress local ip, if ConnectType is ip(2)	SNMPv2-SMIIpAddressr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.5.1.10
rc2kAtm1483ElanRemoteIpAddress remote ip, if ConnectType is ip(2)	SNMPv2-SMIIpAddressr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.5.1.11
rc2kAtm1483ElanInArpSendEnable enable arp sending on the port, if ConnectType is ip(2)	SNMPv2-TCTruthValuer/w Constraints: range: 0-20 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.9.5.1.12
rc2kAtm1483ElanInArpSendInterval interval of arp sending on the port, if ConnectType is ip(2)	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.5.1.13
rc2kAtm1483ElanIpxVlanEncapMethod vlan encapsulation method, if ConnectType is ipx(3)	Enumerationr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.5.1.14
rc2kAtm1483ElanIpxNetworkNum network number, if ConnectType is ipx(3)	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.5.1.15
rc2kAtm1483ElanStgId An identifier used to identify a STG in the device, only in bridge mode	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.9.5.1.16
rc2kAtm1483ElanrcStgTaggedBpduVlanId The VLAN ID to be used for tagging BPDUs, only in bridge mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.9.5.1.17
rc2kAtm1483ElanIpxNetworkAddr network number, instead of rc2kAtm1483ElanIpxNetworkNum	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.9.5.1.18

rc2kAtmSioCardConfigTable

table

.1.3.6.1.4.1.2272.1.100.9.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtmSioCardConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtmSioCardConfigTable'

Copy

2kAtm Sio Card Config Table

rc2kAtmSioCardConfigEntry row .1.3.6.1.4.1.2272.1.100.9.8.1

Entry containing information of 2kAtm Sio Card Config.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kAtmSioCardConfigSlotIndex slot Index.	Integer32	.1.3.6.1.4.1.2272.1.100.9.8.1.1
rc2kAtmSioCardConfigAction	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.8.1.2
rc2kAtmSioCardConfigTraceMode	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.8.1.3
rc2kAtmSioCardConfigImageFileName ATM Image file name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.9.8.1.4
rc2kAtmSioCardConfigElanStatsEnable Enable/Disable Elan Statistics collection	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.9.8.1.5
rc2kAtmSioCardConfigStatsPollPeriod Time interval after which Elan statistics would be polled	Integer32r/w	.1.3.6.1.4.1.2272.1.100.9.8.1.6

rc2kAtmPortStatsTable

table

.1.3.6.1.4.1.2272.1.100.9.10 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtmPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtmPortStatsTable'

Copy

ATM port statistics table

rc2kAtmPortStatsEntry row .1.3.6.1.4.1.2272.1.100.9.10.1

Entry containing information of ATM port statistics

Indexes

No indexes recorded

Column	Syntax	OID
rc2kAtmPortStatsIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.9.10.1.1
rc2kAtmPortStatsInCells Number of Cells received from ATM interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.9.10.1.2
rc2kAtmPortStatsOutCells Number of Cells transmitted by ATM interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.9.10.1.3
rc2kAtmPortStatsOutIdleCells Number of Idle Cells transmitted	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.9.10.1.4
rc2kAtmPortStatsInHecCorrected Number of received cells in which HCS was corrected	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.5
rc2kAtmPortStatsInHecUncorrected Number of received cells dropped because HCS couldn't be corrected	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.6
rc2kAtmPortStatsInUnknownProtos Number of received cells dropped with wrong VPI/VCI	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.7
rc2kAtmPortStatsInPkts Number of AAL5 CPCS PDUs received	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.8
rc2kAtmPortStatsOutPkts Number of AAL5 CPCS PDUs transmitted	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.9
rc2kAtmPortStatsInDroppedPkts Number of AAL5 CPCS PDUs dropped due to resource exhaustion	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.10
rc2kAtmPortStatsOutDroppedPkts Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.10.1.11

rc2kAtmVPortStatsTable

table

.1.3.6.1.4.1.2272.1.100.9.11 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kAtmVPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kAtmVPortStatsTable'

Copy

ATM Elan statistics table

rc2kAtmVPortStatsEntry row .1.3.6.1.4.1.2272.1.100.9.11.1

Entry containing information of ATM Elan statistics

Indexes

No indexes recorded

Column	Syntax	OID
rc2kAtmVPortStatsIfIndex port number	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.9.11.1.1
rc2kAtmVPortStatsVlanId Vlan Id	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.100.9.11.1.2
rc2kAtmVPortStatsClear Clear Elan Stats	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2272.1.100.9.11.1.3
rc2kAtmVPortStatsInOctets AAL5 CPCS PDU octects received from ATM interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.9.11.1.4
rc2kAtmVPortStatsOutOctets AAL5 CPCS PDU octects transmitted out of ATM interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.100.9.11.1.5
rc2kAtmVPortStatsInErrors AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors	SNMPv2-SMICounter32 Enumerated Values: 1 critical 2 high 3 low Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.6
rc2kAtmVPortStatsOutErrors Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors	SNMPv2-SMICounter32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.11.1.7
rc2kAtmVPortStatsInDiscards Number of received AAL5 CPCS PDUs discarded	SNMPv2-SMICounter32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.11.1.8
rc2kAtmVPortStatsOutDiscards Number of AAL5 CPCS PDUs which are to be transmitted but discarded	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.9
rc2kAtmVPortStatsInUcastPkts Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.10
rc2kAtmVPortStatsOutUcastPkts Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address	SNMPv2-SMICounter32 Constraints: range: 1-12 range: 21-26	.1.3.6.1.4.1.2272.1.100.9.11.1.11
rc2kAtmVPortStatsInMulticastPkts Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type)	SNMPv2-SMICounter32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.9.11.1.12
rc2kAtmVPortStatsOutMulticastPkts Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.13
rc2kAtmVPortStatsInBroadcastPkts Received ethernet/IP/IPX packets whose destination address in broadcast address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.14
rc2kAtmVPortStatsOutBroadcastPkts Forwarded ethernet/IP/IPX packets whose destination address in broadcast address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.9.11.1.15

rc2kMdaCardTable

table

.1.3.6.1.4.1.2272.1.100.10 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kMdaCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kMdaCardTable'

Copy

Mda card table

rc2kMdaCardEntry row .1.3.6.1.4.1.2272.1.100.10.1

Entry containing information of Mda card

Indexes

No indexes recorded

Column	Syntax	OID
rc2kMdaCardSlotNum Slot number	Integer32	.1.3.6.1.4.1.2272.1.100.10.1.1
rc2kMdaCardMdaNum MDA number within slot. MDAs are numbered from left to right.	Integer32	.1.3.6.1.4.1.2272.1.100.10.1.2
rc2kMdaCardType Refer to rc2kCardFrontType for the encoding scheme	Enumeration	.1.3.6.1.4.1.2272.1.100.10.1.3
rc2kMdaCardDescription description of mda card	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.4
rc2kMdaCardAdminStatus administration status of mda card	Enumerationr/w	.1.3.6.1.4.1.2272.1.100.10.1.5
rc2kMdaCardOperStatus operation status of mda card.	Enumeration	.1.3.6.1.4.1.2272.1.100.10.1.6
rc2kMdaCardSerialNum serial number of mad card	SNMPv2-TCDisplayString Constraints: range: 1-2 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.7
rc2kMdaCardHwVersion hardware version of mda card	SNMPv2-TCDisplayString Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.8
rc2kMdaCardPartNumber part number of mda card	SNMPv2-TCDisplayString Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.9
rc2kMdaCardDateCode date code of mda card	SNMPv2-TCDisplayString Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.10
rc2kMdaCardDeviations hardware deviation information of mda card	SNMPv2-TCDisplayString Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.100.10.1.11
rc2kMdaCardMacAddr base mac address of mda card	SNMPv2-TCMacAddress Constraints: range: 0-32 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.100.10.1.12
rc2kMdaCardNumPorts number of ports on mda card	SNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.10.1.13
rc2kMdaCardFirstIfIndex first ifindex number on mda card	InterfaceIndex Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.10.1.14
rc2kMdaCardLastIfIndex last ifindex number on mda card	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.100.10.1.15

rc2kCpuEthernetPortRouteTable

table

.1.3.6.1.4.1.2272.1.100.11 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCpuEthernetPortRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCpuEthernetPortRouteTable'

Copy

2k CPU Ethernet Port Route table

rc2kCpuEthernetPortRouteEntry row .1.3.6.1.4.1.2272.1.100.11.1

Entry containing information of 2k CPU Ethernet Port

Indexes

rc2kCardAsicInfoIndex rc2kCardAsicInfoForwardingSlice

Column	Syntax	OID
rc2kCpuEthernetPortRouteNetwork Used to configure the network that can be used to remotely manage this device.	SNMPv2-SMIIpAddressr/w Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.100.11.1.1
rc2kCpuEthernetPortRouteGateway Used to configure the the IP address of the gateway that should be used to forward IP traffic.	SNMPv2-SMIIpAddressr/w Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.100.11.1.2
rc2kCpuEthernetPortRouteRowStatus row status	SNMPv2-TCRowStatusr/w Constraints: range: 0-20 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.11.1.3

rc2kCpuEthernetPortIpv6RouteTable

table

.1.3.6.1.4.1.2272.1.100.13 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCpuEthernetPortIpv6RouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCpuEthernetPortIpv6RouteTable'

Copy

2k CPU Ethernet Port Route table for Ipv6

rc2kCpuEthernetPortIpv6RouteEntry row .1.3.6.1.4.1.2272.1.100.13.1

Entry containing information of 2k CPU Ethernet Port Ipv6

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCpuEthernetPortIpv6RouteNetwork Used to configure the ipv6 network that can be used to remotely manage this device.	IPV6-TCIpv6Address Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.13.1.1
rc2kCpuEthernetPortIpv6RoutePrefixLength The length of the prefix (in bits).	Integer32	.1.3.6.1.4.1.2272.1.100.13.1.2
rc2kCpuEthernetPortIpv6RouteGateway Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.100.13.1.3
rc2kCpuEthernetPortIpv6RouteRowStatus row status	SNMPv2-TCRowStatusr/w Constraints: range: 3-12 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.100.13.1.4

rc2kCardModTable

table

.1.3.6.1.4.1.2272.1.100.14 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCardModTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCardModTable'

Copy

RTM info table

rc2kCardModEntry row .1.3.6.1.4.1.2272.1.100.14.1

Entry containing RTM information

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCardModIndex slot number.	Integer32	.1.3.6.1.4.1.2272.1.100.14.1.1
rc2kCardModPresent Indicates if the RTM in this slot is present	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.14.1.2
rc2kCardModType RTM type	Enumeration	.1.3.6.1.4.1.2272.1.100.14.1.3
rc2kCardModDescription RTM description	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.4
rc2kCardModSerialNum RTM serial number	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.5
rc2kCardModHwVersion RTM hardware version	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.6
rc2kCardModPartNumber RTM part number	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.7
rc2kCardModDateCode RTM date code	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.8
rc2kCardModDeviations RTM deviations	OctetString	.1.3.6.1.4.1.2272.1.100.14.1.9
rc2kCardModCpldId RTM CPLD ID value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.14.1.10
rc2kCardModCpldRev RTM CPLD revision value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.14.1.11

rc2kCardPerfTable

table

.1.3.6.1.4.1.2272.1.100.15 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCardPerfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCardPerfTable'

Copy

This table represents the Card/Slot level DRAM
size, DRAM Used, DRAM Free and CPU Utilization
for the R Module and RC Module cards

rc2kCardPerfEntry row .1.3.6.1.4.1.2272.1.100.15.1

Entry containing information of Card performance

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCardPerfId This represents the slot number. This is only for line cards, slot 5 and 6 should not be used.	Integer32	.1.3.6.1.4.1.2272.1.100.15.1.1
rc2kCardPerfDramSize This represents DRAM Size in Mega bytes	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.15.1.2
rc2kCardPerfDramUsed This represents the amount of DRAM used in kilo bytes	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.15.1.3
rc2kCardPerfDramFree This represents the amount of DRAM Free in kilo bytes	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.15.1.4
rc2kCardPerfCPUUtilization This represents the percentage of CPU utilization	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.15.1.5

rc2kSysAggrRateLimiterStatsTable

table

.1.3.6.1.4.1.2272.1.100.16 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kSysAggrRateLimiterStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kSysAggrRateLimiterStatsTable'

Copy

This table represents the Card/Slot level Aggregate rate limiter stats for power ranger cards.

rc2kSysAggrRateLimiterStatsEntry row .1.3.6.1.4.1.2272.1.100.16.1

Card/Slot level Aggregate rate limiter stats for power ranger cards indexed by slot number

Indexes

rc2kBootConfigHostSlot

Column	Syntax	OID
rc2kSysAggrRateLimiterStatsId This represents the slot number. This is only for line cards, slot 5 and 6 should not be used.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.100.16.1.1
rc2kSysAggrRateLimiterIngGreenLane0 Number of packets passed or marked green by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.2
rc2kSysAggrRateLimiterIngRedLane0 Number of packets dropped or marked red by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 1-120	.1.3.6.1.4.1.2272.1.100.16.1.3
rc2kSysAggrRateLimiterEgrGreenLane0 Number of packets passed or marked green by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 1-120	.1.3.6.1.4.1.2272.1.100.16.1.4
rc2kSysAggrRateLimiterEgrRedLane0 Number of packets dropped or marked red by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.100.16.1.5
rc2kSysAggrRateLimiterIngGreenLane1 Number of packets passed or marked green by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.100.16.1.6
rc2kSysAggrRateLimiterIngRedLane1 Number of packets dropped or marked red by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.7
rc2kSysAggrRateLimiterEgrGreenLane1 Number of packets passed or marked green by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.8
rc2kSysAggrRateLimiterEgrRedLane1 Number of packets dropped or marked red by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 1-4	.1.3.6.1.4.1.2272.1.100.16.1.9
rc2kSysAggrRateLimiterIngGreenLane2 Number of packets passed or marked green by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.16.1.10
rc2kSysAggrRateLimiterIngRedLane2 Number of packets dropped or marked red by the Ingress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.11
rc2kSysAggrRateLimiterEgrGreenLane2 Number of packets passed or marked green by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.12
rc2kSysAggrRateLimiterEgrRedLane2 Number of packets dropped or marked red by the Egress Aggregate rate limiter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.13
rc2kSysAggrRateLimiterStatsClear Clear the Aggregate Rate limiter Stats	SNMPv2-SMIInteger32r/w Enumerated Values: 1 normal 2 highWarning 3 highCritial Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.16.1.14

rc2kPowerConsumptionInfoTable

table

.1.3.6.1.4.1.2272.1.100.17 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kPowerConsumptionInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kPowerConsumptionInfoTable'

Copy

Power consumption info table for all slots

rc2kPowerConsumptionInfoEntry row .1.3.6.1.4.1.2272.1.100.17.1

Entry containing power consumption information of
the slot

Indexes

rcVossSystemFanTrayInfoTrayId

Column	Syntax	OID
rc2kPowerConsumptionInfoIndex Slot number.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.2272.1.100.17.1.1
rc2kPowerConsumptionInfoPowerStatus Power operation status of this slot	Enumeration Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.17.1.2
rc2kPowerConsumptionInfoBasePower The base power required for this slot	SNMPv2-SMIInteger32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.100.17.1.3
rc2kPowerConsumptionInfoConsumedPower The actual consumed power of this slot. Value will be set zero when Power status is 'off' rc2kPowerConsumptionInfoPowerStatus	SNMPv2-SMIInteger32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.100.17.1.4
rc2kPowerConsumptionInfoPowerPriority Used to indicate the priority of the slot for power management	Enumeration Enumerated Values: 1 unknown 2 frontToBack 3 backToFront	.1.3.6.1.4.1.2272.1.100.17.1.5
rc2kPowerConsumptionInfoSlotDescription User to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc	OctetString	.1.3.6.1.4.1.2272.1.100.17.1.6
rc2kPowerConsumptionInfoCardDescription Hardware description of this card	OctetString	.1.3.6.1.4.1.2272.1.100.17.1.7

rc2kTemperatureTable

table

.1.3.6.1.4.1.2272.1.100.18 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kTemperatureTable'

Copy

Table for retrieving the temperatures 
of each card (CP, IO, SF) on the chassis

rc2kTemperatureEntry row .1.3.6.1.4.1.2272.1.100.18.1

Contains information regarding the temperature of
each slot (CP, IO and SF) on the chassis.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kTemperatureSlotIndex Slot number of either a CP (1,2) or IO (3-12) or SF (21-26).	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.18.1.1
rc2kTemperatureSlotDescription Used to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc.	OctetString Enumerated Values: 1 unknown 2 up 3 down 4 notpresent	.1.3.6.1.4.1.2272.1.100.18.1.2
rc2kTemperatureZone1Temperature Zone 1 temperature measured in celsius degree	SNMPv2-SMIGauge32 Enumerated Values: 1 low 2 medium 3 high Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.3
rc2kTemperatureZone2Temperature Zone 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 2 is not available on this slot.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.4
rc2kTemperatureZone3Temperature Zone 3 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 3 is not available on this slot.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.5
rc2kTemperatureZone4Temperature Zone 4 temperature measured in celsius degree	SNMPv2-SMIGauge32 Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.100.18.1.6
rc2kTemperatureZone5Temperature Zone 5 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 5 is not available on this slot.	SNMPv2-SMIGauge32 Enumerated Values: 1 present 2 notPresent Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.7
rc2kTemperatureHighTemperature Highest temperature measured in celsius degree	SNMPv2-SMIGauge32 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.100.18.1.8
rc2kTemperatureLowTemperature Lowest temperature measured in celsius degree	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.9
rc2kTemperatureAlarmThreshold When the card temperature crosses this threshold, an alarm will be set.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.100.18.1.10
rc2kTemperatureShutdownThreshold When the card temperature crosses this threshold, the card will be shutdown.	SNMPv2-SMIGauge32 Constraints: range: 1-16000	.1.3.6.1.4.1.2272.1.100.18.1.11

rc2kUsbTable

table

.1.3.6.1.4.1.2272.1.100.19 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kUsbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kUsbTable'

Copy

Table for retrieving the data for
the USBs inserted on the chassis

rc2kUsbEntry row .1.3.6.1.4.1.2272.1.100.19.1

Contains information regarding the data for
USBs inserted on the chassis

Indexes

No indexes recorded

Column	Syntax	OID
rc2kUsbSlotIndex Slot number of CP in which USB is inserted.	Integer32 Constraints: range: 64-5000000	.1.3.6.1.4.1.2272.1.100.19.1.1
rc2kUsbSlotDescription Used to indicate the slot type information. Such as, 'Slot1'..'Slot2.	OctetString	.1.3.6.1.4.1.2272.1.100.19.1.2
rc2kUsbVendorId Indicates the Vendor Id for the inserted USB. Value is assigned by USB-IF.	OctetString	.1.3.6.1.4.1.2272.1.100.19.1.3
rc2kUsbManufacturer Indicates the Manufacturer for the inserted USB.	OctetString	.1.3.6.1.4.1.2272.1.100.19.1.4
rc2kUsbProductId Indicates the Product Id for the inserted USB. Value is assigned by manufacturer.	OctetString	.1.3.6.1.4.1.2272.1.100.19.1.5
rc2kUsbProductName Indicates the Product Name for the inserted USB.	OctetString Constraints: range: 1-16000	.1.3.6.1.4.1.2272.1.100.19.1.6
rc2kUsbSerialNumber Indicates the Serial Number for the inserted USB.	OctetString Constraints: range: 3-12	.1.3.6.1.4.1.2272.1.100.19.1.7
rc2kUsbRevision Indicates the release number for the inserted USB.	OctetString Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.100.19.1.8
rc2kUsbMaxCurrent Returns the Max Power as defined by specification for the inserted USB. The units are milliamps.	milliampsSNMPv2-SMIInteger32 Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.100.19.1.9

rc2kCardAsicInfoTable

table

.1.3.6.1.4.1.2272.1.100.20 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kCardAsicInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kCardAsicInfoTable'

Copy

A table that contains asic information that 
is specific to a forwarding slice on a 
second generation IO module.

rc2kCardAsicInfoEntry row .1.3.6.1.4.1.2272.1.100.20.1

Second Generation Card attributes

Indexes

No indexes recorded

Column	Syntax	OID
rc2kCardAsicInfoIndex A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 3 to the value of rcChasNumSlots	Integer32	.1.3.6.1.4.1.2272.1.100.20.1.1
rc2kCardAsicInfoForwardingSlice A unique value for each forwarding slice on the card.	Integer32	.1.3.6.1.4.1.2272.1.100.20.1.2
rc2kCardAsicInfoQE QE version for the forwarding slice on IO card	OctetString	.1.3.6.1.4.1.2272.1.100.20.1.3
rc2kCardAsicInfoZagrosFpga Zagros FPGA for the forwarding slice on IO card	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.2272.1.100.20.1.4
rc2kCardAsicInfoRsp RSP for the forwarding slice on IO card	OctetString	.1.3.6.1.4.1.2272.1.100.20.1.5
rc2kCardAsicInfoPhyRev PHY revision for the forwarding slice on IO card	OctetString	.1.3.6.1.4.1.2272.1.100.20.1.6

rc2kIoCardTemperatureTable

table

.1.3.6.1.4.1.2272.1.100.21 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kIoCardTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kIoCardTemperatureTable'

Copy

Table for retrieving the temperatures the sensors
located on the FPGA's and FA's on the generation 2
IO cards.

rc2kIoCardTemperatureEntry row .1.3.6.1.4.1.2272.1.100.21.1

Contains information regarding the temperatures of
FPGA's and FA's on the generation 2 IO cards.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kIoCardTemperatureSlotIndex Slot number of the IO card	Integer32	.1.3.6.1.4.1.2272.1.100.21.1.1
rc2kIoCardTemperatureFPGASensor1Temperature Temperature of the FPGA Sensor 1, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.2
rc2kIoCardTemperatureFPGASensor2Temperature Temperature of the FPGA Sensor 2, located on the Zagros on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.3
rc2kIoCardTemperatureFPGASensor3Temperature Temperature of the FPGA Sensor 3, located on the RSP on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.4
rc2kIoCardTemperatureFPGASensor4Temperature Temperature of the FPGA Sensor 4, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.5
rc2kIoCardTemperatureFPGASensor5Temperature Temperature of the FPGA Sensor 5, located on the Zagros on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 1-386	.1.3.6.1.4.1.2272.1.100.21.1.6
rc2kIoCardTemperatureFPGASensor6Temperature Temperature of the FPGA Sensor 6, located on the RSP on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.21.1.7
rc2kIoCardTemperatureFPGASensor7Temperature Temperature of the FPGA Sensor 7, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Enumerated Values: 8 eight 64 sixtyfour Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.8
rc2kIoCardTemperatureFPGASensor8Temperature Temperature of the FPGA Sensor 8, located on the Zagros on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.100.21.1.9
rc2kIoCardTemperatureFPGASensor9Temperature Temperature of the FPGA Sensor 9, located on the RSP on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.100.21.1.10
rc2kIoCardTemperatureFPGAZoneHighTemperature Highest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.100.21.1.11
rc2kIoCardTemperatureFPGAZoneLowTemperature Lowest temperature of all the FPGA sensors located on this IO card, measured in celsius degrees.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.12
rc2kIoCardTemperatureFPGAZoneAlarmThreshold When the FPGA temperature crosses this threshold on this IO card, an alarm will be set.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.100.21.1.13
rc2kIoCardTemperatureFPGAZoneShutdownThreshold When the FPGA temperature crosses this threshold on this IO card, the card will be shutdown.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.100.21.1.14
rc2kIoCardTemperatureFASensor1Temperature Temperature of the FA Sensor 1, located on the first slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.100.21.1.15
rc2kIoCardTemperatureFASensor2Temperature Temperature of the FA Sensor 2, located on the second slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-600	.1.3.6.1.4.1.2272.1.100.21.1.16
rc2kIoCardTemperatureFASensor3Temperature Temperature of the FA Sensor 3, located on the third slice, measured in celsius degrees. A value of 0 for this mib object indicates that this sensor is not available on this slot.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.100.21.1.17
rc2kIoCardTemperatureFAZoneHighTemperature Highest temperature of all the FA sensors located on this IO card, measured in celsius degrees.	celsiusSNMPv2-SMIInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.100.21.1.18
rc2kIoCardTemperatureFAZoneLowTemperature Lowest temperature of all the FA sensors located on this IO card, measured in celsius degrees.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.19
rc2kIoCardTemperatureFAZoneAlarmThreshold When the FA temperature crosses this threshold on this IO card, an alarm will be set.	celsiusSNMPv2-SMIInteger32 Enumerated Values: 1 created 2 committed 3 modified Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.20
rc2kIoCardTemperatureFAZoneShutdownThreshold When the FA temperature crosses this threshold on this IO card, the card will be shutdown.	celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.100.21.1.21

rc2kBootConfigHostTable

table

.1.3.6.1.4.1.2272.1.100.22 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rc2kBootConfigHostTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rc2kBootConfigHostTable'

Copy

Table for the bootconfig host info on the device

rc2kBootConfigHostEntry row .1.3.6.1.4.1.2272.1.100.22.1

Entry containing boot config host information.

Indexes

No indexes recorded

Column	Syntax	OID
rc2kBootConfigHostSlot slot number, VSP uses 1,2	Integer32	.1.3.6.1.4.1.2272.1.100.22.1.1
rc2kBootConfigHostTftpHash Enables tftp hashing	SNMPv2-TCTruthValuer/w Constraints: range: 1-386 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.100.22.1.2
rc2kBootConfigHostTftpRetransmit Set tftp retransmit timeout counter	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.100.22.1.3
rc2kBootConfigHostTftpTimeout Set tftp timeout counter	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.100.22.1.4
rc2kBootConfigHostUser Configure host user	OctetStringr/w Enumerated Values: 1 hipri 2 balanced 3 lopri	.1.3.6.1.4.1.2272.1.100.22.1.5
rc2kBootConfigHostPassword Configure host password	OctetStringr/w	.1.3.6.1.4.1.2272.1.100.22.1.6

rcVossSystemTemperatureTable

table

.1.3.6.1.4.1.2272.1.101.1.1.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVossSystemTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVossSystemTemperatureTable'

Copy

Table for retrieving the temperatures 
of each temperature sensor for Single CP
system

rcVossSystemTemperatureEntry row .1.3.6.1.4.1.2272.1.101.1.1.2.1

Contains information regarding the temperature of
each sensor on the device.

Indexes

No indexes recorded

Column	Syntax	OID
rcVossSystemTemperatureSensorIndex Temperature Sensor Index. The range depends on the number of sensors on the device. For CN3240 device, there are 4 temperature sensors	Integer32	.1.3.6.1.4.1.2272.1.101.1.1.2.1.1
rcVossSystemTemperatureSensorDescription Used to describle the name of the sensor	OctetString	.1.3.6.1.4.1.2272.1.101.1.1.2.1.2
rcVossSystemTemperatureTemperature Sensor temperature measured in celsius degree	celsiusSNMPv2-SMIGauge32 Enumerated Values: 1 tailDrop 2 lowDrop 3 mediumDrop 4 highDrop Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.101.1.1.2.1.3
rcVossSystemTemperatureWarningThreshold Temperature value of Warning threshold of this sensor. When the temperature crosses this threshold, a warning message will be generated	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.101.1.1.2.1.4
rcVossSystemTemperatureCriticalThreshold Temperature value of Critical threshold of this sensor. When the temperature crosses this threshold, whether the system is being shutdown or a critical message is generated depends on the hardware capability	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.101.1.1.2.1.5
rcVossSystemTemperatureStatus Indicates the current temperature status based on the. Warning and critical Threshold	Enumeration	.1.3.6.1.4.1.2272.1.101.1.1.2.1.6

rcVossSystemFanTrayInfoTable

table

.1.3.6.1.4.1.2272.1.101.1.1.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVossSystemFanTrayInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVossSystemFanTrayInfoTable'

Copy

Table for the fan tray module info on the device

rcVossSystemFanTrayInfoEntry row .1.3.6.1.4.1.2272.1.101.1.1.3.1

Contains information regarding a fan tray unit

Indexes

No indexes recorded

Column	Syntax	OID
rcVossSystemFanTrayInfoTrayId Fan tray ID. 3 trays on the device DSG8032, 3 trays on the device DSG9032 4 trays on the device DSG8064	Integer32	.1.3.6.1.4.1.2272.1.101.1.1.3.1.1
rcVossSystemFanTrayInfoDescription Description of the fan tray	OctetString	.1.3.6.1.4.1.2272.1.101.1.1.3.1.2
rcVossSystemFanTrayInfoSerialNumber The fan tray serial number.	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.101.1.1.3.1.3
rcVossSystemFanTrayInfoPartNumber The fan tray part number.	OctetString	.1.3.6.1.4.1.2272.1.101.1.1.3.1.4
rcVossSystemFanTrayInfoFlowType Direction of the Fan Flow: - unknown(1) - Flow can not be determined. - fronttoback(2) - Front to back flow. - backtofront(3) - Back to front flow.	Enumeration	.1.3.6.1.4.1.2272.1.101.1.1.3.1.5

rcVossSystemFanInfoTable

table

.1.3.6.1.4.1.2272.1.101.1.1.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVossSystemFanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVossSystemFanInfoTable'

Copy

Table for the fan info on each fan tray on
device this

rcVossSystemFanInfoEntry row .1.3.6.1.4.1.2272.1.101.1.1.4.1

Contains information regarding a fan tray unit

Indexes

No indexes recorded

Column	Syntax	OID
rcVossSystemFanInfoTrayId FanInfo tray ID. 3 trays on the device CN3240	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.101.1.1.4.1.1
rcVossSystemFanInfoFanId FanInfo unit ID on a fan tray. Each FanInfo tray has 2 fans on the device CN3240	Integer32	.1.3.6.1.4.1.2272.1.101.1.1.4.1.2
rcVossSystemFanInfoDescription Description of the fan tray	OctetString	.1.3.6.1.4.1.2272.1.101.1.1.4.1.3
rcVossSystemFanInfoOperStatus Actual status of the FanInfo: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated.	Enumeration	.1.3.6.1.4.1.2272.1.101.1.1.4.1.4
rcVossSystemFanInfoOperSpeed Indicate the cuurent operational speed of the fan	Enumeration Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.101.1.1.4.1.5

rcVossUsbTable

table

.1.3.6.1.4.1.2272.1.101.1.1.7 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVossUsbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVossUsbTable'

Copy

Table for the USB module info on the device

rcVossUsbEntry row .1.3.6.1.4.1.2272.1.101.1.1.7.1

Contains information regarding a USB module

Indexes

No indexes recorded

Column	Syntax	OID
rcVossUsbTrayId The Index of USB	Integer32	.1.3.6.1.4.1.2272.1.101.1.1.7.1.1
rcVossUsbStatus The present status of the USB storage	Enumeration	.1.3.6.1.4.1.2272.1.101.1.1.7.1.2
rcVossUsbDescription Description of USB	OctetString	.1.3.6.1.4.1.2272.1.101.1.1.7.1.3

rcPrQosPolicyTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosPolicyTable'

Copy

A list of GPID entries. The number of entries is
given by rcPrQosPolicyNumPolicies.

rcPrQosPolicyEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.2.1

Entry containing configuration information for a
particular global policer.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosPolicyGpId A value that uniquely identifies Global Policer associated with this entry.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1
rcPrQosPolicyName An administratively-assigned name for this Global Policer.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2
rcPrQosPolicyPeakRate Global Policer Peak Rate in Kilobit/sec.	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3
rcPrQosPolicySvcRate Global Policer Service Rate in Kilobit/sec.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4
rcPrQosPolicyLaneMembers The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the co…	LaneSetr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5
rcPrQosPolicyRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 2000-10000000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6

rcPrQosLocalPolicyTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.3 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosLocalPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosLocalPolicyTable'

Copy

A list of policer entries.

rcPrQosLocalPolicyEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.3.1

An entry containing configuration information for
a particular local policer. This field will
return 0 for CB as tap.lane.lpid is not used.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosLocalPolicyGpId A value of Global Policer ID corresponding to this local policer.	Integer32 Enumerated Values: 1 created 2 applied 3 modified	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1
rcPrQosLocalPolicyIndex The slot number of the VSP chassis on which stats are collected. Valid slots are IO slots which are in slots 3 to 12.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2
rcPrQosLocalPolicyPeakRate Global Peak Rate in Kilobit/sec.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3
rcPrQosLocalPolicySvcRate Global Policer Service Rate in Kilobit/sec.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4
rcPrQosLocalPolicyTotalPkts Global Policer Total Packets Count.	SNMPv2-SMICounter64 Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5
rcPrQosLocalPolicyTotalBytes Global Policer Total Bytes Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6
rcPrQosLocalPolicyBytesOverPeak Global Policer Bytes over Peak Rate Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7
rcPrQosLocalPolicyBytesOverSvc Global Policer Bytes over Service Rate Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8
rcPrQosLocalPolicyTotalPktsDropped The count of Global Policer Total Packets dropped due to reasons other than policing, e.g. congestion.	SNMPv2-SMICounter64 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9
rcPrQosLocalPolicyLaneMember The lane that this Gpid has a local policing account on	OctetString Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10
rcPrQosLocalPolicyGreenPackets The total number of packets received that were below committed rate.	SNMPv2-SMICounter64 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11
rcPrQosLocalPolicyGreenBytes The total number of bytes received that were below the committed rate.	SNMPv2-SMICounter64 Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12
rcPrQosLocalPolicyYellowPackets The total number of packets received that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13
rcPrQosLocalPolicyYellowBytes The total number of bytes received that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14
rcPrQosLocalPolicyRedPackets The total number of packets received that were above the peak rate.	SNMPv2-SMICounter64 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15
rcPrQosLocalPolicyRedBytes The total number of bytes received that were above the peak rate.	SNMPv2-SMICounter64 Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16
rcPrQosLocalPolicyStatsClear Clear Qos Policy statistics.	SNMPv2-TCTruthValuer/w Constraints: range: 0-6 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17

rcPrQosTxQueueTemplateTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.4 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosTxQueueTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosTxQueueTemplateTable'

Copy

A list of egress queue templates. The number of 
templates is given by rcPrQosTxQueueNumTemplates.

rcPrQosTxQueueTemplateEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.4.1

Entry containing configuration information for a
particular egress queue template. Queue is a set of
egress queues.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosTxQueueTemplateId A value that uniquely identifies Egress Queue Template.	Integer32 Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1
rcPrQosTxQueueTemplateName An administratively-assigned name for this egress Queue Template.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2
rcPrQosTxQueueTemplateMaxQueues Maximum number of queues in this Template.	Enumerationr/w Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3
rcPrQosTxQueueTemplateBalancedQueues Total number of Balanced Queues in this Template.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4
rcPrQosTxQueueTemplateHiPriQueues Total number of High Priority Queues in this Template.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5
rcPrQosTxQueueTemplateLoPriQueues Total number of Low Priority Queues in this Template.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6
rcPrQosTxQueueTemplateTotalQueues Total number of queues in this Template.	SNMPv2-SMIInteger32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7
rcPrQosTxQueueTemplateBalancedQList List of Balanced Queues in this Template.	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8
rcPrQosTxQueueTemplateHiPriQList List of High Priority Queues in this Template.	OctetString Enumerated Values: 1 highPri 2 balanced 3 lowPri	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9
rcPrQosTxQueueTemplateLoPriQList List of Low Priority Queues in this Template.	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10
rcPrQosTxQueueTemplateTotalQLists List of Total Physical Queues in this Template.	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11
rcPrQosTxQueueTemplateMinRateTotal Sum of minimum rate guarantees for this template.	Integer32 Constraints: range: 0-8000	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12
rcPrQosTxQueueTemplateMaxRateHiPri Sum of maximum rate guarantees for high priority queues of this template.	Integer32 Enumerated Values: 1 tailDrop 2 lowDrop 3 mediumDrop 4 highDrop	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13
rcPrQosTxQueueTemplatePortMembers Port members of this template.	PortSetr/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14
rcPrQosTxQueueTemplateFlags Bitset indicated template state.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15
rcPrQosTxQueueTemplateApply When apply is issued by the administrator, the Egress Queue Set attributes are committed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16
rcPrQosTxQueueTemplateRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-2147483647 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17

rcPrQosTxQueueTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.5 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosTxQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosTxQueueTable'

Copy

A list of elementary Egress queue entries.

rcPrQosTxQueueEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.5.1

Entry containing configuration information for a
particular elementary egress queue.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosTxQueueTid Template ID of the template this queue belongs to.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1
rcPrQosTxQueueQid Queue Offset from the base queue for this port.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2
rcPrQosTxQueueName An NNSC name for this egress queue. Allowed only for 8 NNSC queues.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3
rcPrQosTxQueueStyle Egress queue style.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4
rcPrQosTxQueueWeight Egress queue weight. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32 Constraints: range: 192-297	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5
rcPrQosTxQueueMaxRate Egress queue maximum rate, Kbs	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6
rcPrQosTxQueueMinRate Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7
rcPrQosTxQueueBquantum Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8
rcPrQosTxQueueMaxLength Maximum queue length.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9
rcPrQosTxQueueWredCurveSet Random Early Detection Number.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10
rcPrQosTxQueueRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11

rcPrQosTxQueueStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosTxQueueStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosTxQueueStatsTable'

Copy

A list of elementary Egress queue stats entries.

rcPrQosTxQueueStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.6.1

Entry containing statistics information for a
particular elementary egress queue.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosTxQueueStatsPort Port index of the stats table.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1
rcPrQosTxQueueStatsQid Queue Offset from the base queue for this port.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2
rcPrQosTxQueueStatsTotalPages Total pages offered to the queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3
rcPrQosTxQueueStatsDroppedPages Total pages dropped by the queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4
rcPrQosTxQueueStatsUtilization Utilization percentage of the queue.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5

rcPrQosIngressExpToQosTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosIngressExpToQosTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosIngressExpToQosTable'

Copy

This table is used to specify the Mpls EXP to
QOS (Exp bit->QOS) mapping on packet ingress.

rcPrQosIngressExpToQosEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.7.1

Entry containing information of Exp bit->Qos mapping

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosIngressExpToQosIndex Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1
rcPrQosIngressExpToQosMplsExp The Mpls Exp bit level.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.2
rcPrQosIngressExpToQosLevel qos level	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.3
rcPrQosIngressExpToQosRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4

rcPrQosEgressQosToExpTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosEgressQosToExpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosEgressQosToExpTable'

Copy

This table is used to specify the QOS to
Mpls EXP bit field (QOS->Exp bit) mapping on packet
egress.

rcPrQosEgressQosToExpEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.8.1

Entry containing information of Qos->Exp bit mapping

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosEgressQosToExpIndex Used to uniquely identify a row in this table.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1
rcPrQosEgressQosToExpQosLevel qos level	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.2
rcPrQosEgressQosToExpMplsExp The Mpls EXP bit level.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.3
rcPrQosEgressQosToExpRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4

rcPrQosSubportQueueSetTemplateTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.9 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosSubportQueueSetTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosSubportQueueSetTemplateTable'

Copy

A list of elementary egress queue templates.

rcPrQosSubportQueueSetTemplateEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.9.1

Entry containing configuration information for
a particular egress queue template. Queue is a
set of egress queues

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosSubportQueueSetTemplatePortIndex Port Index.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.1
rcPrQosSubportQueueSetTemplateIndex A name assigned for this Subport Queue Set.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.2
rcPrQosSubportQueueSetTemplatePort Port assigned for this Subport Queue Set.	InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.3
rcPrQosSubportQueueSetTemplateApply When apply is issued by the administrators, the subport queue set attributes are committed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.4
rcPrQosSubportQueueSetTemplateSubportProfileName Name of the subport queue profile to be applied for this template.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.5
rcPrQosSubportQueueSetTemplateAssignment Name of the trunk to this queue set is assigned.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.6
rcPrQosSubportQueueSetTemplateRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.7
rcPrQosSubportQueueSetTemplateMinRate Minimum Rate. Minimum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Min Rate can be configured is 10000.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.8
rcPrQosSubportQueueSetTemplateMaxRate Maximum Rate. Maximum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Max Rate can be configured is 10000.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.9
rcPrQosSubportQueueSetTemplateMaxRateState Enable/Disable the maximum rate.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.10
rcPrQosSubportQueueSetTemplateStatus Bitset indicating Subport Queue Set status.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.11

rcPrQosIsidRateLimitsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.10 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosIsidRateLimitsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosIsidRateLimitsTable'

Copy

Isid Rate Limits Tables are 
for R-Module cards only

rcPrQosIsidRateLimitsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.10.1

Isid Rate Limits Table

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosIsidRateLimitsSlotNumber Slot number.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.1
rcPrQosIsidRateLimitsLaneNumber Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped under Lane 3. For a 3 Port 10G card (8683XLR), Port 1 comes und…	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.2
rcPrQosIsidRateLimitsAdminState Admin control for the Rate Limiter Table.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.3

rcPrQosIsidRateLimitsIsidTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.11 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosIsidRateLimitsIsidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosIsidRateLimitsIsidTable'

Copy

Table contain rate limit for all Power Range card  (R module).
Based on Slot and lane number and Isid ID

rcPrQosIsidRateLimitsIsidEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.11.1

Entry of Rate limit per slot and lane and Isid ID

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosIsidRateLimitsIsidSlotNumber Slot number.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.1
rcPrQosIsidRateLimitsIsidLaneNumber Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped under Lane 3. For a 3 Port 10G card (8683XLR), Port 1 comes und…	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.2
rcPrQosIsidRateLimitsIsidIsidId Isid Id.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.3
rcPrQosIsidRateLimitsIsidRateLimit Rate Limit in Mbps.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.4

rcPrQosSubportProfileTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.12 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosSubportProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosSubportProfileTable'

Copy

Table contain Subport Queue Profile information

rcPrQosSubportProfileEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.12.1

Subport Queue Profile Table entry

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosSubportProfileIndex A value that uniquely identifies the Subport Queue Profile.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.1
rcPrQosSubportProfileName Subport Queue Profile table name to be used.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.2
rcPrQosSubportProfileBalancedQueues Total number of Balanced Queues in this profile.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.3
rcPrQosSubportProfileHighPriQueues Total number of High Priority Queues in this profile.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.4
rcPrQosSubportProfileLowPriQueues Total number of Low Priority Queues in this profile.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.5
rcPrQosSubportProfileBalancedQList List of Balanced Queues in this profile.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.6
rcPrQosSubportProfileHighPriQList List of High Priority Queues in this profile.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.7
rcPrQosSubportProfileLowPriQList List of Low Priority Queues in this profile.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.8
rcPrQosSubportProfileRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.9

rcPrQosSubportProfileQueueTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.13 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosSubportProfileQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosSubportProfileQueueTable'

Copy

A list of elementary subport queue entries.

rcPrQosSubportProfileQueueEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.13.1

Entry containing configuration information for
a particular subport egress queue.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosSubportProfileQueueProfileIndex Profile index of the profie this queue belongs to.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.1
rcPrQosSubportProfileQueueQIndex Queue offset from the base queue.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.2
rcPrQosSubportProfileQueueQStyle Queue style.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.3
rcPrQosSubportProfileQueueMaxRate Queue maximum rate in percentage.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.4
rcPrQosSubportProfileQueueMinRate Queue minimum rate in percentage.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.5
rcPrQosSubportProfileQueueMaxLength Maximum queue length.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.6
rcPrQosSubportProfileQueueWredCurveSet Weighted Random Early Detection setting.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.7
rcPrQosSubportProfileQueueQPriority Q Priority.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.8

rcPrQosSubportQueueSetEqmapTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.14 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosSubportQueueSetEqmapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosSubportQueueSetEqmapTable'

Copy

Internal QoS to Egress Queue mapping table.

rcPrQosSubportQueueSetEqmapEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.14.1

Entry containing egress queue id for an
internal QoS level on a subport q set.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosSubportQueueSetEqmapPortIndex Port Index.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.1
rcPrQosSubportQueueSetEqmapIndex Subport Queue Set Index.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.2
rcPrQosSubportQueueSetEqmapInternalQos Internal QoS.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.3
rcPrQosSubportQueueSetEqmapPort Port assigned for this Subport Queue Set.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.4
rcPrQosSubportQueueSetEqmapEgressQueue Egress Queue Id assigned for the specified Internal QoS Lvl.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.5

rcPrQosCosQuePortStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.15 · 1 row entry · 34 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosCosQuePortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosCosQuePortStatsTable'

Copy

This table is used to get the qos cos queue port stats.

rcPrQosCosQuePortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.15.1

Entry containing information of port Qos cosq stats

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosCosQuePortStatsIndex Used to indicate the loopback port number from 192(1/1) to 297(2/42).	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.1
rcPrQosCosQuePortStatsQue0OutPackets the out packets for Cos queue 0.	SNMPv2-SMICounter64 Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.2
rcPrQosCosQuePortStatsQue0OutBytes the out bytes for Cos queue 0.	SNMPv2-SMICounter64 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.3
rcPrQosCosQuePortStatsQue0DropPackets the drop packets for Cos queue 0.	SNMPv2-SMICounter64 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.4
rcPrQosCosQuePortStatsQue0DropBytes the drop bytes for Cos queue 0.	SNMPv2-SMICounter64 Constraints: range: 0-127	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.5
rcPrQosCosQuePortStatsQue1OutPackets the out packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.6
rcPrQosCosQuePortStatsQue1OutBytes the out bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.7
rcPrQosCosQuePortStatsQue1DropPackets the drop packets for Cos queue 1.	SNMPv2-SMICounter64 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.8
rcPrQosCosQuePortStatsQue1DropBytes the drop bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.9
rcPrQosCosQuePortStatsQue2OutPackets the out packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.10
rcPrQosCosQuePortStatsQue2OutBytes the out bytes for Cos queue 2.	SNMPv2-SMICounter64 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.11
rcPrQosCosQuePortStatsQue2DropPackets the drop packets for Cos queue 2.	SNMPv2-SMICounter64 Constraints: range: 1-16	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.12
rcPrQosCosQuePortStatsQue2DropBytes the drop bytes for Cos queue 2.	SNMPv2-SMICounter64 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.13
rcPrQosCosQuePortStatsQue3OutPackets the out packets for Cos queue 3.	SNMPv2-SMICounter64 Enumerated Values: 0 none 1 etherBegin 2 macDstBegin 3 macSrcBegin 4 ethTypeLenBegin 5 arpBegin 6 ipHdrBegin 7 ipOptionsBegin 8 ipPayloadBegin 9 ipTosBegin 10 ipProtoBegin 11 ipSrcBegin 12 ipDstBegin 13 tcpBegin 14 tcpSrcportBegin 15 tcpDstportBegin 16 tcpFlagsEnd 17 udpBegin 18 udpSrcportBegin 19 udpDstportBegin 20 etherEnd 21 ipHdrEnd 22 icmpMsgBegin 23 tcpEnd 24 udpEnd 25 ipv6HdrBegin Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.14
rcPrQosCosQuePortStatsQue3OutBytes the out bytes for Cos queue 3.	SNMPv2-SMICounter64 Constraints: range: 0-25	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.15
rcPrQosCosQuePortStatsQue3DropPackets the drop packets for Cos queue 3.	SNMPv2-SMICounter64 Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.16
rcPrQosCosQuePortStatsQue3DropBytes the drop bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.17
rcPrQosCosQuePortStatsQue4OutPackets the out packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.18
rcPrQosCosQuePortStatsQue4OutBytes the out bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.19
rcPrQosCosQuePortStatsQue4DropPackets the drop packets for Cos queue 4.	SNMPv2-SMICounter64 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.20
rcPrQosCosQuePortStatsQue4DropBytes the drop bytes for Cos queue 4.	SNMPv2-SMICounter64 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.21
rcPrQosCosQuePortStatsQue5OutPackets the out packets for Cos queue 5.	SNMPv2-SMICounter64 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.22
rcPrQosCosQuePortStatsQue5OutBytes the out bytes for Cos queue 5.	SNMPv2-SMICounter64 Enumerated Values: 1 inVlan 2 outVlan 3 inPort 4 outPort Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.23
rcPrQosCosQuePortStatsQue5DropPackets the drop packets for Cos queue 5.	SNMPv2-SMICounter64 Constraints: range: 0-2000	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.24
rcPrQosCosQuePortStatsQue5DropBytes the drop bytes for Cos queue 5.	SNMPv2-SMICounter64 Enumerated Values: 1 deny 2 permit Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.25
rcPrQosCosQuePortStatsQue6OutPackets the out packets for Cos queue 6.	SNMPv2-SMICounter64 Enumerated Values: 1 none 2 mirror 3 count 4 mirror-count 5 ipfix 6 mirror-ipfix 7 count-ipfix 8 mirror-count-ipfix Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.26
rcPrQosCosQuePortStatsQue6OutBytes the out bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.27
rcPrQosCosQuePortStatsQue6DropPackets the drop packets for Cos queue 6.	SNMPv2-SMICounter64 Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.28
rcPrQosCosQuePortStatsQue6DropBytes the drop bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.29
rcPrQosCosQuePortStatsQue7OutPackets the out packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.30
rcPrQosCosQuePortStatsQue7OutBytes the out bytes for Cos queue 7.	SNMPv2-SMICounter64 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.31
rcPrQosCosQuePortStatsQue7DropPackets the drop packets for Cos queue 7.	SNMPv2-SMICounter64 Enumerated Values: 1 ipv4 2 ipv6 3 nonipv6 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.32
rcPrQosCosQuePortStatsQue7DropBytes the drop bytes for Cos queue 7.	SNMPv2-SMICounter64 Enumerated Values: 1 deny 2 permit Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.33
rcPrQosCosQuePortStatsClearStat Clear Stats.	SNMPv2-TCTruthValuer/w Constraints: range: 0-4094 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.34

rcPrQosCosQueLoopbackPortStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.16 · 1 row entry · 34 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosCosQueLoopbackPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosCosQueLoopbackPortStatsTable'

Copy

This table is used to get the qos cos queue port stats.

rcPrQosCosQueLoopbackPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.16.1

Entry containing information of port Qos cosq stats

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosCosQueLoopbackPortStatsIndex Used to indicate the port number from 1 to 2.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.1
rcPrQosCosQueLoopbackPortStatsQue0OutPackets the out packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.2
rcPrQosCosQueLoopbackPortStatsQue0OutBytes the out bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.3
rcPrQosCosQueLoopbackPortStatsQue0DropPackets the drop packets for Cos queue 0.	SNMPv2-SMICounter64 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.4
rcPrQosCosQueLoopbackPortStatsQue0DropBytes the drop bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.5
rcPrQosCosQueLoopbackPortStatsQue1OutPackets the out packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.6
rcPrQosCosQueLoopbackPortStatsQue1OutBytes the out bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.7
rcPrQosCosQueLoopbackPortStatsQue1DropPackets the drop packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.8
rcPrQosCosQueLoopbackPortStatsQue1DropBytes the drop bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.9
rcPrQosCosQueLoopbackPortStatsQue2OutPackets the out packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.10
rcPrQosCosQueLoopbackPortStatsQue2OutBytes the out bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.11
rcPrQosCosQueLoopbackPortStatsQue2DropPackets the drop packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.12
rcPrQosCosQueLoopbackPortStatsQue2DropBytes the drop bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.13
rcPrQosCosQueLoopbackPortStatsQue3OutPackets the out packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.14
rcPrQosCosQueLoopbackPortStatsQue3OutBytes the out bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.15
rcPrQosCosQueLoopbackPortStatsQue3DropPackets the drop packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.16
rcPrQosCosQueLoopbackPortStatsQue3DropBytes the drop bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.17
rcPrQosCosQueLoopbackPortStatsQue4OutPackets the out packets for Cos queue 4.	SNMPv2-SMICounter64 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.18
rcPrQosCosQueLoopbackPortStatsQue4OutBytes the out bytes for Cos queue 4.	SNMPv2-SMICounter64 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.19
rcPrQosCosQueLoopbackPortStatsQue4DropPackets the drop packets for Cos queue 4.	SNMPv2-SMICounter64 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.20
rcPrQosCosQueLoopbackPortStatsQue4DropBytes the drop bytes for Cos queue 4.	SNMPv2-SMICounter64 Enumerated Values: 0 none 1 deny 2 permit Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.21
rcPrQosCosQueLoopbackPortStatsQue5OutPackets the out packets for Cos queue 5.	SNMPv2-SMICounter64 Enumerated Values: 0 phbcs0 8 phbcs1 10 phbaf11 12 phbaf12 14 phbaf13 16 phbcs2 18 phbaf21 20 phbaf22 22 phbaf23 24 phbcs3 26 phbaf31 28 phbaf32 30 phbaf33 32 phbcs4 34 phbaf41 36 phbaf42 38 phbaf43 40 phbcs5 46 phbef 48 phbcs6 56 phbcs7 256 disable Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.22
rcPrQosCosQueLoopbackPortStatsQue5OutBytes the out bytes for Cos queue 5.	SNMPv2-SMICounter64 Enumerated Values: 0 zero 1 one 2 two 3 three 4 four 5 five 6 six 7 seven 8 disable Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.23
rcPrQosCosQueLoopbackPortStatsQue5DropPackets the drop packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.24
rcPrQosCosQueLoopbackPortStatsQue5DropBytes the drop bytes for Cos queue 5.	SNMPv2-SMICounter64 Enumerated Values: 1 deny 2 permit Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.25
rcPrQosCosQueLoopbackPortStatsQue6OutPackets the out packets for Cos queue 6.	SNMPv2-SMICounter64 Constraints: range: 0-16000	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.26
rcPrQosCosQueLoopbackPortStatsQue6OutBytes the out bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.27
rcPrQosCosQueLoopbackPortStatsQue6DropPackets the drop packets for Cos queue 6.	SNMPv2-SMICounter64 Enumerated Values: 1 up 2 down Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.28
rcPrQosCosQueLoopbackPortStatsQue6DropBytes the drop bytes for Cos queue 6.	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.29
rcPrQosCosQueLoopbackPortStatsQue7OutPackets the out packets for Cos queue 7.	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.30
rcPrQosCosQueLoopbackPortStatsQue7OutBytes the out bytes for Cos queue 7.	SNMPv2-SMICounter64 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.31
rcPrQosCosQueLoopbackPortStatsQue7DropPackets the drop packets for Cos queue 7.	SNMPv2-SMICounter64 Enumerated Values: 0 platinum 1 gold 2 silver 3 bronze 4 standard 5 custom 6 premium 7 critical 8 disable Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.32
rcPrQosCosQueLoopbackPortStatsQue7DropBytes the drop bytes for Cos queue 7.	SNMPv2-SMICounter64 Constraints: range: 0-31	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.33
rcPrQosCosQueLoopbackPortStatsClearStat Clear stats.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.34

rcPrQosCosQueCppPortStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.1.17 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrQosCosQueCppPortStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrQosCosQueCppPortStatsTable'

Copy

This table is used to get the qos cos queue port stats.

rcPrQosCosQueCppPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.17.1

Entry containing information of port Qos cosq stats

Indexes

No indexes recorded

Column	Syntax	OID
rcPrQosCosQueCppPortStatsIndex Used to indicate the cos queue number from 0 to 15.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.1
rcPrQosCosQueCppPortStatsOutPackets the out packets for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.2
rcPrQosCosQueCppPortStatsOutBytes the out bytes for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.3
rcPrQosCosQueCppPortStatsDropPackets the drop packets for cpp port.	SNMPv2-SMICounter64 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.4
rcPrQosCosQueCppPortStatsDropBytes the drop bytes for cpp port.	SNMPv2-SMICounter64 Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.5

rcPrFilterActTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.2.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterActTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterActTable'

Copy

A table of Acts to store information of each Act
entry. This table is indexed by the Act Id.

rcPrFilterActEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1

One Act Entry holding Act information.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterActId A table of Acts to store information of each Act. This table is indexed by the Act Id.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1
rcPrFilterActName A descriptive name chosen by the administrator for the Act Entry.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2
rcPrFilterActArpAttrs Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only valid option for Arp attributes.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3
rcPrFilterActEthernetAttrs Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 2-255	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4
rcPrFilterActIpAttrs Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect all other selections.	Integer32r/w Enumerated Values: 0 phbcs0 8 phbcs1 10 phbaf11 12 phbaf12 14 phbaf13 16 phbcs2 18 phbaf21 20 phbaf22 22 phbaf23 24 phbcs3 26 phbaf31 28 phbaf32 30 phbaf33 32 phbcs4 34 phbaf41 36 phbaf42 38 phbaf43 40 phbcs5 46 phbef 48 phbcs6 56 phbcs7 256 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5
rcPrFilterActProtocolAttrs Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32), icmpv6MsgType(64) none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6
rcPrFilterActApply When apply is issued by the administrator, the ACT attributes cannot be modified.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7
rcPrFilterActRowStatus Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-5 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8
rcPrFilterActIpv6Attrs Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(4), nextHdr(16), none: If selected then unselect all other selections.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9

rcPrFilterActPatternTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.2.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterActPatternTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterActPatternTable'

Copy

A table of user-defined parameters of  Acls to
store information of each Acl. This table is indexed
by the Act Id and PatternIndex.

rcPrFilterActPatternEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1

Entry containing Configuration information for a
particular Act.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterActPatternActId An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1
rcPrFilterActPatternIndex Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL.	Integer32 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2
rcPrFilterActPatternName A descriptive name chosen by the administrator for the Acl Pattern Entry.	OctetStringr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3
rcPrFilterActPatternBase User defined fields from headers to be used in the Aces of the Acl.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4
rcPrFilterActPatternOffset Set Offset in bytes to the beginning offset of the user defined field with selected header option as base.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5
rcPrFilterActPatternLength The number of bytes to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-15 are valid.	Integer32r/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6
rcPrFilterActPatternRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7

rcPrFilterAclTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.3.1 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAclTable'

Copy

A table of Acls to store information of each Acl.
This table is indexed by the Acl Id.

rcPrFilterAclEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1

Entry containing Configuration information for
a particular Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAclId A unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1
rcPrFilterAclActId A unique identifier for Act entry in the range of Table Size.	Integer32r/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.2
rcPrFilterAclName A descriptive name chosen by the administrator for the Acl Entry.	OctetStringr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3
rcPrFilterAclType An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'in' and an egress packet is assigned a value 'out'.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4
rcPrFilterAclAceListSize Indicates the number of Aces in a particular Acl.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5
rcPrFilterAclDefaultAction Indicates action to be taken when none of the Aces in the Acl match.	Enumerationr/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6
rcPrFilterAclGlobalAction Indicates action is applied to all Aces that match in an Acl.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.7
rcPrFilterAclState Enables/Disables the state of all Aces in the Acl	EnableValuer/w Constraints: range: 0-14 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8
rcPrFilterAclVlanList An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9
rcPrFilterAclPortList Indicates the ports to be added to this Acl Entry.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10
rcPrFilterAclRowStatus Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl.	SNMPv2-TCRowStatusr/w Constraints: range: 1-2048 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11
rcPrFilterAclNumVlanIds Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12
rcPrFilterAclPktType Indicates the packet type that this ACL is applicable to.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13
rcPrFilterAclControlPktRule When the rcPrFilterAclDefaultAction object is set to deny then control packets follow this rule. Otherwise, the object value can be ignored.	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14
rcPrFilterAclVlanId Destination Vlan Id for mirroring the packets. The value 0 means no vlan is being mirrored. When the value of rcPrFilterAclVlanId is non-zero, the values of rcPrFilterAclMltId and rcPrFilterAclDstPortList must be 0.	Integer32r/w Enumerated Values: 1 eq 2 ne	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15
rcPrFilterAclMltId Destination Mlt Id for mirroring the packets. The value 0 means no mlt is being mirrored. When the value of rcPrFilterAclMltId is non-zero, the values of rcPrFilterAclVlanId and rcPrFilterAclDstPortList must be 0.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16
rcPrFilterAclDstPortList Destination Port List for mirroring the packets. The value 0 means no port(s) is being mirrored. When the value of rcPrFilterAclDstPortList is non-zero, the values of rcPrFilterAclVlanId and rcPrFilterAclMltId must be 0.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17
rcPrFilterAclIpfixState Value indicating whether ipfix option on the Acl is enabled.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18

rcPrFilterAclStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.3.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAclStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAclStatsTable'

Copy

A table of Acls Statistics entries to store the 
Default Acl statistics for each Acl. 
This table is indexed by the Acl Id.

rcPrFilterAclStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1

Entry containing default statistics information for
a particular Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAclStatsAclId A unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 0 zero 1 one 2 two 3 three 4 four 5 five 6 six 7 seven	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1
rcPrFilterAclStatsMatchDefaultCounterPkts Packet count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action.	SNMPv2-SMICounter64 Enumerated Values: 1 eq 2 ne 8 mask Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.2
rcPrFilterAclStatsMatchDefaultOctets Byte count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.3
rcPrFilterAclStatsClear Clear default statistics for ACL Filters.	SNMPv2-TCTruthValuer/w Constraints: range: 0-7 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4
rcPrFilterAclStatsMatchDefaultSecurityPkts Security packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5
rcPrFilterAclStatsMatchDefaultSecurityOctets Security octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6
rcPrFilterAclStatsMatchDefaultQosPkts QOS packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7
rcPrFilterAclStatsMatchDefaultQosOctets QOS octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8
rcPrFilterAclStatsMatchGlobalSecurityPkts Security packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9
rcPrFilterAclStatsMatchGlobalSecurityOctets Security octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Enumerated Values: 1 eq 2 ne Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10
rcPrFilterAclStatsMatchGlobalQosPkts QOS packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11
rcPrFilterAclStatsMatchGlobalQosOctets QOS octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12

rcPrFilterAceTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.1 · 1 row entry · 36 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceTable'

Copy

A table of Aces to store information of each Ace
in context of its parent Acl. This is indexed by
AclId and AceId.

rcPrFilterAceEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1

One Ace entry holding Ace information. Ace is a
member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceAclId An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1
rcPrFilterAceId AceId uniquely identifies one Ace entry.	Integer32 Constraints: range: 4096-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2
rcPrFilterAceName A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one.	OctetStringr/w Enumerated Values: 1 eq 2 ne 8 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3
rcPrFilterAceMode Operating Mode associated with the Ace is effective on the packets matching this Ace.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4
rcPrFilterAceRemarkDscp The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13)…	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5
rcPrFilterAceRemarkDot1Priority Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P.	Enumerationr/w Constraints: range: 1-4084	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6
rcPrFilterAceRedirectNextHop Redirect matching IP traffic to the next hop.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7
rcPrFilterAceRedirectUnreach Set the desired behavior for redirected traffic in case the specified next-hop is not reachable.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8
rcPrFilterAcePolice Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired.	Integer32r/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9
rcPrFilterAceAdminState Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled.	EnableValuer/w Constraints: range: 1-2000 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10
rcPrFilterAceOperState The current operational state of the Ace.	Enumeration Enumerated Values: 1 operation	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11
rcPrFilterAceEgressQueue Indicates the Egress Queue for 10/100 card. If only 1 value is specified then this value is applied to Queue1g and Queue10g as well. If 2 values are specified then the first value is applied to 10/100 card and the sec…	Integer32r/w Enumerated Values: 1 eq	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12
rcPrFilterAceEgressQueue1g Indicates the Egress Queue for 1gig card.	Integer32r/w Enumerated Values: 1 arpRequest 2 arpResponse	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13
rcPrFilterAceEgressQueue10g Indicates the Egress Queue for 10gig card.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14
rcPrFilterAceEgressQueueNNSC Ace Egress Queue NNSC.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15
rcPrFilterAceFlags Bitmask for the flags: none(0): Default value for the flags. stopOnMatch(1): set desired behavior for flag whether to stop or continue in case an Ace matching the packet is found. Whe…	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16
rcPrFilterAceStopOnMatch Value indicating whether stop-on-match option on the Ace is enabled.	EnableValuer/w Constraints: range: 1-2048 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17
rcPrFilterAceMltIndex If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports.	Integer32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18
rcPrFilterAceRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1500 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19
rcPrFilterAceIpfixState Value indicating whether ipfix option on the Ace is enabled.	EnableValuer/w Constraints: range: 1-100 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20
rcPrFilterAceRedirectNextHopIpv6 Redirect matching IPv6 traffic to the next hop.	IPV6-TCIpv6Addressr/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 prefix 9 mask 10 range Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21
rcPrFilterAceDstPortList Destination Port List for mirroring the packets.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22
rcPrFilterAceDstVlanId Destination Vlan to mirror the packets.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23
rcPrFilterAceDstMltId Destination Mlt to mirror the packets.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24
rcPrFilterAceInternalQos Internal QOS Level assigned to the packet flow. DefVal = 8 is Disable	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25
rcPrFilterAceCount Value indicating whether Count option on the Ace is enabled.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26
rcPrFilterAceLog Value indicating whether log option on the Ace is enabled.	EnableValuer/w Constraints: range: 1-2048 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27
rcPrFilterAceCopytoPcap Value indicating whether copy to pcap option on the Ace is enabled.	EnableValuer/w Constraints: range: 1-2000 Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28
rcPrFilterAceDstIp Destination IP address to mirror the packets.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29
rcPrFilterAceDstIpTtl Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30
rcPrFilterAceDstIpDscp Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to …	Enumerationr/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 prefix 9 mask 10 range	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31
rcPrFilterAceMonitoringIsidOffset Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.32
rcPrFilterAceMonitoringIsid Actual monitor I-SID value in which packets are mirrored to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.33
rcPrFilterAceMirroringQos Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.34
rcPrFilterAceRemoveTag Used to remove inner vlan tag of the mirrored packet into the SPB network. By default it is set to false and vlan tag will not be removed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.35
rcPrFilterAceRedirectNextHopVrfName VRF Name associated with IP/IPv6 redirect next hop.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.36

rcPrFilterAceEthSrcAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthSrcAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthSrcAddrTable'

Copy

A table of Aces to store Ethernet Source MAC
Address Header information of each Ace in context
of its parent Acl.

rcPrFilterAceEthSrcAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1

One Ace entry holding Ace Ethernet Source MAC Address
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthSrcAddrAclId An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1
rcPrFilterAceEthSrcAddrAceId An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2
rcPrFilterAceEthSrcAddrList The list of ethernet source address to match.	OctetStringr/w Enumerated Values: 1 eq 2 ne 8 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3
rcPrFilterAceEthSrcAddrListCount Count to store the number of discrete ranges entered for the ethernet src address.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4
rcPrFilterAceEthSrcAddrOper Operators for Ace Ethernet Source MAC Address.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5
rcPrFilterAceEthSrcAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6
rcPrFilterAceEthSrcAddrOperMask The Mac Address mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthSrcAddrOper is set to 'eq'. In case of…	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7

rcPrFilterAceEthDstAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthDstAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthDstAddrTable'

Copy

A table of Aces to store Ethernet Destination MAC
Address Header information of each Ace in context
of its parent Acl.

rcPrFilterAceEthDstAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1

One Ace entry holding Ace Ethernet Destination
MAC Address information. An Ace is a member of one
Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthDstAddrAclId An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1
rcPrFilterAceEthDstAddrAceId An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2
rcPrFilterAceEthDstAddrList List of ethernet destination address to match.	OctetStringr/w Enumerated Values: 1 eq 2 ne	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3
rcPrFilterAceEthDstAddrListCount Count to store the number of discrete ranges entered for the ethernet dst address.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4
rcPrFilterAceEthDstAddrOper Operators for Ace Ethernet Destination MAC Address.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5
rcPrFilterAceEthDstAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6
rcPrFilterAceEthDstAddrOperMask The Mac Address mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthDstAddrOper is set to 'eq'. In case of…	OctetStringr/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7

rcPrFilterAceEthEtherTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthEtherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthEtherTable'

Copy

A table of Aces to store Ethernet Ether Header 
information of each Ace in context of its parent 
Acl.

rcPrFilterAceEthEtherEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1

One Ace entry holding Ace Ethernet Ether
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthEtherAclId An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 5 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1
rcPrFilterAceEthEtherAceId An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2
rcPrFilterAceEthEtherTypeList EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. …	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3
rcPrFilterAceEthEtherTypeListCount Count to store the number of discrete ranges entered for the ethernet types.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4
rcPrFilterAceEthEtherTypeOper Ethernet Type Operators.	Enumerationr/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5
rcPrFilterAceEthEtherRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-2000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6

rcPrFilterAceEthVlanTagPrioTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.5 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthVlanTagPrioTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthVlanTagPrioTable'

Copy

A table of Aces to store Ethernet Vlan Tag 
Priority Header information of each Ace in context 
of its parent Acl.

rcPrFilterAceEthVlanTagPrioEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1

One Ace entry holding Ace Ethernet Vlan Tag Priority
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthVlanTagPrioAclId An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1
rcPrFilterAceEthVlanTagPrioAceId An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2
rcPrFilterAceEthVlanTagPrioVlanTagPrio Priority bits (3-bit field) from the 802.1Q/p tag.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3
rcPrFilterAceEthVlanTagPrioOper Operators for Ace Ethernet Vlan Tag Priority.	Enumerationr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4
rcPrFilterAceEthVlanTagPrioRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-1000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5
rcPrFilterAceEthVlanTagPrioOperMask The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not for ERS8600	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6

rcPrFilterAceEthPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthPortTable'

Copy

A table of Aces to store Ethernet  Port 
Header information of each Ace in context 
of its parent Acl.

rcPrFilterAceEthPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1

One Ace entry holding Ace Ethernet Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthPortAclId An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1
rcPrFilterAceEthPortAceId An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2
rcPrFilterAceEthPortPort Port Number or Port List to match on.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3
rcPrFilterAceEthPortOper Operator for Ace Ethernet Port.	Enumerationr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4
rcPrFilterAceEthPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-1000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5

rcPrFilterAceEthVlanIdTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.7 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthVlanIdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthVlanIdTable'

Copy

A table of Aces to store Ethernet Vlan Id
Header information of each Ace in context 
of its parent Acl.

rcPrFilterAceEthVlanIdEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1

One Ace entry holding Ace Ethernet Vlan Id
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthVlanIdAclId An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 2 ne 3 le 4 ge	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1
rcPrFilterAceEthVlanIdAceId An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2
rcPrFilterAceEthVlanIdVlanIdList Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3
rcPrFilterAceEthVlanIdOper Operator for Ace Ethernet VlanId.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4
rcPrFilterAceEthVlanIdRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4096 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5
rcPrFilterAceEthVlanIdOperMask The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlanId in VSP 9000 to replace rcPrFilterAceEthVlanIdVlanIdList	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6
rcPrFilterAceEthVlanIdVlanId Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7

rcPrFilterAceArpTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceArpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceArpTable'

Copy

A table of Aces to store Arp Header information
of each Ace in context of its parent Acl.

rcPrFilterAceArpEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1

One Ace entry holding Ace Arp Header information.
Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceArpAclId An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1
rcPrFilterAceArpAceId An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2
rcPrFilterAceArpType Ace Arp Operation.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3
rcPrFilterAceArpOper Operator for Ace Arp Operation.	Enumerationr/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4
rcPrFilterAceArpValue Ace Arp can be a request or a response.	Enumerationr/w Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5
rcPrFilterAceArpRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1500 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6

rcPrFilterAceIpSrcAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.9 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpSrcAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpSrcAddrTable'

Copy

A table of Aces to store IP Source Address Header 
information of each Ace in context of its parent Acl.

rcPrFilterAceIpSrcAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1

One Ace entry holding Ace IP Source Address Header
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpSrcAddrAclId An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1
rcPrFilterAceIpSrcAddrAceId An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2
rcPrFilterAceIpSrcAddrList The list of ip source address to match from IP header. Not applicable to VSP9000	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.3
rcPrFilterAceIpSrcAddrListCount Count to store the number of discrete ranges entered for the ip src address. Not applicable to VSP9000	Integer32r/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.4
rcPrFilterAceIpSrcAddrOper Operators for Ace Ip Source Address.	Enumerationr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5
rcPrFilterAceIpSrcAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1500 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6
rcPrFilterAceIpSrcAddrIpAddr IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000	SNMPv2-SMIIpAddressr/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7
rcPrFilterAceIpSrcAddrOperMaskRange The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected.	SNMPv2-SMIIpAddressr/w Enumerated Values: 1 eq 2 ne Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8

rcPrFilterAceIpDstAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.10 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpDstAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpDstAddrTable'

Copy

A table of Aces to store IP Destination Address 
Header information of each Ace in context of its 
parent Acl.

rcPrFilterAceIpDstAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1

One Ace entry holding Ace IP Destination Address
Header information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpDstAddrAclId An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1
rcPrFilterAceIpDstAddrAceId An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2
rcPrFilterAceIpDstAddrList The list of ip dst address to match from IP header. Not applicable to VSP9000	OctetStringr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.3
rcPrFilterAceIpDstAddrListCount Count to store the number of discrete ranges entered for the IP Destination Address. Not applicable to VSP9000	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.4
rcPrFilterAceIpDstAddrOper Operators for Ace IP Destination Address.	Enumerationr/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5
rcPrFilterAceIpDstAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 eq 6 matchAny 7 matchAll 8 mask Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6
rcPrFilterAceIpDstAddrIpAddr IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7
rcPrFilterAceIpDstAddrOperMaskRange The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8

rcPrFilterAceIpDscpTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.11 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpDscpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpDscpTable'

Copy

A table of Aces to store IP Dscp Header information 
of each Ace in context of its parent Acl.

rcPrFilterAceIpDscpEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1

One Ace entry holding Ace IP Dscp Header information.
An Ace is a member of one Acl.

Indexes

rcPrFilterAcePattern1AclId rcPrFilterAcePattern1AceId

Column	Syntax	OID
rcPrFilterAceIpDscpAclId An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1
rcPrFilterAceIpDscpAceId An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2
rcPrFilterAceIpDscpList The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13)…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3
rcPrFilterAceIpDscpListCount Count to store the number of discrete ranges entered for the dscp values.	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4
rcPrFilterAceIpDscpOper Operators for Ace Ip Dscp.	Enumerationr/w Enumerated Values: 1 eq 3 le 4 ge	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5
rcPrFilterAceIpDscpRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6
rcPrFilterAceIpDscpOperMask The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDscpOper is set ro eq	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7

rcPrFilterAceIpProtoTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.12 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpProtoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpProtoTable'

Copy

A table of Aces to store IP Proto Header information 
of each Ace in context of its parent Acl.

rcPrFilterAceIpProtoEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1

One Ace entry holding Ace IP Proto Header information.
An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpProtoAclId An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1
rcPrFilterAceIpProtoAceId An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2
rcPrFilterAceIpProtoList Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set proto…	OctetStringr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3
rcPrFilterAceIpProtoListCount Count to store the number of discrete ranges entered for the ethernet protocol ids.	Integer32r/w Enumerated Values: 1 eq 3 le 4 ge	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4
rcPrFilterAceIpProtoOper Operators for Ace Ip Protocols.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5
rcPrFilterAceIpProtoRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6

rcPrFilterAceIpOptionsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.13 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpOptionsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpOptionsTable'

Copy

A table of Aces to store IP Options Header 
information of each Ace in context of its parent Acl.

rcPrFilterAceIpOptionsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1

One Ace entry holding Ace IP Options Header
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpOptionsAclId An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1
rcPrFilterAceIpOptionsAceId An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2
rcPrFilterAceIpOptionsOptions Ip options to be matched from the IP Header.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3
rcPrFilterAceIpOptionsOper Logical Operator - only 'any' is valid at present.	Enumerationr/w Enumerated Values: 1 eq 3 le 4 ge	.1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4
rcPrFilterAceIpOptionsRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5

rcPrFilterAceIpFragTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.14 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpFragTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpFragTable'

Copy

A table of Aces to store IP Fragmentation Header 
information of each Ace in context of its parent Acl.

rcPrFilterAceIpFragEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1

One Ace entry holding Ace IP Fragmentation Header
information. An Ace is a member of one Acl.

Indexes

rcPrFilterAceStatsAclId rcPrFilterAceStatsAceId rcPrFilterAceStatsPortId

Column	Syntax	OID
rcPrFilterAceIpFragAclId An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1
rcPrFilterAceIpFragAceId An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2
rcPrFilterAceIpFragFragmentation Ip Fragmentation bits to be matched from the IP Header.	Enumerationr/w Constraints: range: 0-703	.1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3
rcPrFilterAceIpFragOper Operator for Ip fragmentation.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4
rcPrFilterAceIpFragRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5

rcPrFilterAceProtoTcpSrcPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.15 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoTcpSrcPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoTcpSrcPortTable'

Copy

A table of Aces to store TCP Source Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoTcpSrcPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1

One entry holding Ace Protocol TCP Source Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoTcpSrcPortAclId An index to the AceProtoTcpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1
rcPrFilterAceProtoTcpSrcPortAceId An index to the AceProtoTcpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2
rcPrFilterAceProtoTcpSrcPortPort Port Number or Port List to match on.	OctetStringr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3
rcPrFilterAceProtoTcpSrcPortCount Count to store the number of discrete ranges entered for the TCP source port.	Integer32r/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4
rcPrFilterAceProtoTcpSrcPortOper Operator for Ace Protocol TcpSrcPort.	Enumerationr/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 mask 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5
rcPrFilterAceProtoTcpSrcPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1500 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6

rcPrFilterAceProtoUdpSrcPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.16 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoUdpSrcPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoUdpSrcPortTable'

Copy

A table of Aces to store UDP Source Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoUdpSrcPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1

One entry holding Ace Protocol UDP Source Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoUdpSrcPortAclId An index to the AceProtoUdpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 2 ne 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1
rcPrFilterAceProtoUdpSrcPortAceId An index to the AceProtoUdpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Enumerated Values: 0 zero 1 one 2 two 3 three 4 four 5 five 6 six 7 seven 254 notConfigured	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2
rcPrFilterAceProtoUdpSrcPortPort Port Number or Port List to match on.	OctetStringr/w Enumerated Values: 1 eq 2 ne 8 mask 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3
rcPrFilterAceProtoUdpSrcPortCount Count to store the number of discrete ranges entered for the UDP source port.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4
rcPrFilterAceProtoUdpSrcPortOper Operator for Ace Protocol UdpSrcPort.	Enumerationr/w Enumerated Values: 1 eq 2 ne 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5
rcPrFilterAceProtoUdpSrcPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-4096 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6

rcPrFilterAceProtoTcpDstPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.17 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoTcpDstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoTcpDstPortTable'

Copy

A table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoTcpDstPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1

One entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoTcpDstPortAclId An index to the AceProtoTcpDstPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-14	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1
rcPrFilterAceProtoTcpDstPortAceId An index to the AceProtoTcpDstPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2
rcPrFilterAceProtoTcpDstPortPort Port Number or Port List to match on.	OctetStringr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3
rcPrFilterAceProtoTcpDstPortCount Count to store the number of discrete ranges entered for the TCP dest port.	Integer32r/w Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4
rcPrFilterAceProtoTcpDstPortOper Operator for Ace Protocol TcpDstPort.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5
rcPrFilterAceProtoTcpDstPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6

rcPrFilterAceProtoUdpDstPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.18 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoUdpDstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoUdpDstPortTable'

Copy

A table of Aces to store UDP Dest Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoUdpDstPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1

One entry holding Ace Protocol UDP Dest Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoUdpDstPortAclId An index to the AceProtoUdpDstPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1
rcPrFilterAceProtoUdpDstPortAceId An index to the AceProtoUdpDstPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 prefix 9 mask 10 range 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2
rcPrFilterAceProtoUdpDstPortPort Port Number or Port List to match on.	OctetStringr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3
rcPrFilterAceProtoUdpDstPortCount Count to store the number of discrete ranges entered for the UDP dest port.	Integer32r/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 8 prefix 9 mask 10 range 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4
rcPrFilterAceProtoUdpDstPortOper Operator for Ace Protocol UdpDstPort.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5
rcPrFilterAceProtoUdpDstPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 eq 2 ne 8 mask 254 notConfigured 255 any Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6

rcPrFilterAceProtoIcmpMsgTypeTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.19 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoIcmpMsgTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoIcmpMsgTypeTable'

Copy

A table of Aces to store ICMP message type information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoIcmpMsgTypeEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1

One entry holding Ace ICMP message type
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoIcmpMsgTypeAclId An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 noOperation 7 recordRoute 10 experimentalMeasurement 11 mtuProbe 12 mtuReply 15 encode 68 timestamp 82 traceroute 130 baseSecurity 131 looseSourceRoute 133 extendedSecurity 134 commercialSecurity 136 streamID 137 strictSourceRouting 142 experimentalAccessControl 144 imiTrafficDescriptor 145 extendedIP 147 addressExtension 148 routeAlert 149 selectiveDirectedBroadcast 150 nsapAddresses 151 dynamicPacketState 152 upstreamMulticastPacket 205 experimentalFlowControl	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1
rcPrFilterAceProtoIcmpMsgTypeAceId An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Enumerated Values: 5 any 254 notConfigured	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2
rcPrFilterAceProtoIcmpMsgTypeList One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).	OctetStringr/w Enumerated Values: 0 noFragment 1 anyFragment 2 moreFragment 3 unused3 4 lastFragment 5 unused5 6 unused6 7 unused7 254 notConfigured	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3
rcPrFilterAceProtoIcmpMsgTypeCount Count to store the number of discrete ranges entered for the ICMP message types.	Integer32r/w Enumerated Values: 1 eq 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4
rcPrFilterAceProtoIcmpMsgTypeOper Operator for Ace Protocol IcmpMsgTypes.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5
rcPrFilterAceProtoIcmpMsgTypeRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6

rcPrFilterAceProtoTcpFlagsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.20 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoTcpFlagsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoTcpFlagsTable'

Copy

A table of Aces to store TCP Flags information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoTcpFlagsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1

One entry holding Ace Protocol TCP flags
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoTcpFlagsAclId An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1
rcPrFilterAceProtoTcpFlagsAceId An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2
rcPrFilterAceProtoTcpFlagsList One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3
rcPrFilterAceProtoTcpFlagsCount Count to store the number of discrete ranges entered for the TCP flags.	Integer32r/w Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4
rcPrFilterAceProtoTcpFlagsOper Operator for Ace Protocol TcpFlags.	Enumerationr/w Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5
rcPrFilterAceProtoTcpFlagsRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-1500 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6
rcPrFilterAceProtoTcpFlagsOperMask The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAceProtoTcpFlagsOper is set to eq	Integer32r/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7

rcPrFilterAcePattern1Table

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.21 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAcePattern1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAcePattern1Table'

Copy

A table of pattern fields for Aces to manage the
settings for each user defined field.

rcPrFilterAcePattern1Entry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1

One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAcePattern1AclId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1
rcPrFilterAcePattern1AceId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 2 ne 3 le 4 ge 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2
rcPrFilterAcePattern1Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetStringr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3
rcPrFilterAcePattern1Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetStringr/w Enumerated Values: 1 eq 2 ne 3 le 4 ge 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4
rcPrFilterAcePattern1Oper Operators for Ace Pattern.	Enumerationr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5
rcPrFilterAcePattern1RowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 eq 2 ne 254 notConfigured 255 any Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6

rcPrFilterAcePattern2Table

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.22 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAcePattern2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAcePattern2Table'

Copy

A table of pattern fields for Aces to manage the
settings for each user defined field.

rcPrFilterAcePattern2Entry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1

One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAcePattern2AclId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1
rcPrFilterAcePattern2AceId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 8 mask 9 range 254 notConfigured	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2
rcPrFilterAcePattern2Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetStringr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3
rcPrFilterAcePattern2Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetStringr/w Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4
rcPrFilterAcePattern2Oper Operators for Ace Pattern.	Enumerationr/w Enumerated Values: 1 eq 8 mask 9 range 254 notConfigured	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5
rcPrFilterAcePattern2RowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6

rcPrFilterAcePattern3Table

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.23 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAcePattern3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAcePattern3Table'

Copy

A table of pattern fields for Aces to manage the
settings for each user defined field.

rcPrFilterAcePattern3Entry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1

One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAcePattern3AclId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 2 ne 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1
rcPrFilterAcePattern3AceId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2
rcPrFilterAcePattern3Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetStringr/w Enumerated Values: 1 eq 2 ne 254 notConfigured 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3
rcPrFilterAcePattern3Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4
rcPrFilterAcePattern3Oper Operators for Ace Pattern.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5
rcPrFilterAcePattern3RowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-4096 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6

rcPrFilterAceStatsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.24 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceStatsTable'

Copy

A table of ACE Statistics Entries to store per-ACE-per-Port
Statistics

rcPrFilterAceStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1

Ace Statistics entry holding per-ACE-per-port Statistics

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceStatsAclId An index to the AceStatsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1
rcPrFilterAceStatsAceId An index to the AceStatsEntry, a unique identifier for ACE entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq 3 le 4 ge 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2
rcPrFilterAceStatsPortId An index to the AceStatsEntry, a unique identifier of the portId. This object is not being used in VSP 9000. It should be alway in VVSP 9000	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3
rcPrFilterAceStatsMatchCountPkts Count of packets that match this particular Ace on this particular port.	SNMPv2-SMICounter64 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4
rcPrFilterAceStatsMatchCountOctets Byte count of traffic that match this particular Ace on this particular port	SNMPv2-SMICounter64 Enumerated Values: 1 eq 3 le 4 ge 255 any Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5
rcPrFilterAceStatsClear Clear Per-ACE-Per-Port statistics.	SNMPv2-TCTruthValuer/w Constraints: range: 0-32 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6

rcPrFilterAceEthShowTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.25 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceEthShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceEthShowTable'

Copy

A table of Aces to store Ethernet Header
information of each Ace in context of
its parent Acl.

rcPrFilterAceEthShowEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1

One Ace entry holding Ace Ethernet information.
Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceEthShowAclId An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1
rcPrFilterAceEthShowAceId An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2
rcPrFilterAceEthShowSrcAddrList The list of ethernet source address to match.	OctetString Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3
rcPrFilterAceEthShowSrcAddrOper Operators for Ace Ethernet Source MAC Address.	Enumeration Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4
rcPrFilterAceEthShowDstAddrList List of ethernet destination address to match.	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5
rcPrFilterAceEthShowDstAddrOper Operators for Ace Ethernet Destination MAC Address.	Enumeration Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6
rcPrFilterAceEthShowEtherTypeList EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. …	OctetString Enumerated Values: 1 eq 2 ne 3 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7
rcPrFilterAceEthShowEtherTypeOper Ethernet Type Operators.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8
rcPrFilterAceEthShowVlanTagPrio Priority bits (3-bit field) from the 802.1Q/p tag.	Enumeration Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9
rcPrFilterAceEthShowVlanTagPrioOper Operators for Ace Ethernet Vlan Tag Priority.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10
rcPrFilterAceEthShowPort Port Number or Port List to match on.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11
rcPrFilterAceEthShowPortOper Operator for Ace Ethernet Port.	Enumeration Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12
rcPrFilterAceEthShowVlanIdList Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthShowVlanId instead	OctetString Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.13
rcPrFilterAceEthShowVlanIdOper Operator for Ace Ethernet VlanId.	Enumeration Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14
rcPrFilterAceEthShowSrcAddrOperMask The mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthSrcAddrOper is set to 'eq'. In case of the prefix…	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15
rcPrFilterAceEthShowDstAddrOperMask The mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFilterAceEthDstAddrOper is set to 'eq'. In case of the prefix…	OctetString Enumerated Values: 1 eq 2 ne 3 mask	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16
rcPrFilterAceEthShowVlanTagPrioOperMask The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not for ERS8600	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17
rcPrFilterAceEthShowVlanIdOperMask The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlanId in VSP 9000 to replace rcPrFilterAceEthVlanIdVlanIdList	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18
rcPrFilterAceEthShowVlanId Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19

rcPrFilterAceIpShowTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.26 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpShowTable'

Copy

A table of Aces to store IP Header
information of each Ace in context of
its parent Acl.

rcPrFilterAceIpShowEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1

One Ace entry holding Ace IP information.
Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpShowAclId An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1
rcPrFilterAceIpShowAceId An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2
rcPrFilterAceIpShowSrcAddrList The list of ip source address to match from IP header. Not applicable to VSP9000	OctetString Enumerated Values: 1 eq 2 ne	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.3
rcPrFilterAceIpShowSrcAddrOper Operators for Ace Ip Source Address.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4
rcPrFilterAceIpShowDstAddrList The list of ip dst address to match from IP header. Not applicable to VSP9000	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.5
rcPrFilterAceIpShowDstAddrOper Operators for Ace Ip Destination Address.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6
rcPrFilterAceIpShowDscpList The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13)…	OctetString Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7
rcPrFilterAceIpShowDscpOper Operators for Ace Ip Dscp.	Enumeration Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8
rcPrFilterAceIpShowProtoList Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set proto…	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9
rcPrFilterAceIpShowProtoOper Operators for Ace Ip Protocols.	Enumeration Enumerated Values: 1 eq 2 ne 3 mask 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10
rcPrFilterAceIpShowOptions Ip options to be matched from the IP Header.	Enumeration Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11
rcPrFilterAceIpShowOptionsOper Logical Operator - only 'any' is valid at present.	Enumeration Enumerated Values: 1 eq 2 ne 3 mask 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12
rcPrFilterAceIpShowFragmentation Ip Fragmentation bits to be matched from the IP Header.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13
rcPrFilterAceIpShowFragOper Operator for Ip fragmentation.	Enumeration Enumerated Values: 1 eq 2 ne 255 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14
rcPrFilterAceIpShowSrcAddrIpAddr IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000	SNMPv2-SMIIpAddress Enumerated Values: 1 eq 255 any Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15
rcPrFilterAceIpShowSrcAddrOperMaskRange The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16
rcPrFilterAceIpShowDstAddrIpAddr IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000	SNMPv2-SMIIpAddress Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17
rcPrFilterAceIpShowDstAddrOperMaskRange The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected.	SNMPv2-SMIIpAddress Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18
rcPrFilterAceIpShowDscpOperMask The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDscpOper is set ro eq	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19

rcPrFilterAceProtoShowTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.27 · 1 row entry · 25 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoShowTable'

Copy

A table of Aces to store Protocol Header
information of each Ace in context of
its parent Acl.

rcPrFilterAceProtoShowEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1

One Ace entry holding Ace Ethernet information.
Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoShowAclId An index to the AceProtoShowEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1
rcPrFilterAceProtoShowAceId An index to the AceProtoShowEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2
rcPrFilterAceProtoShowTcpSrcPort Port Number or Port List to match on. Not applicable to VSP9000	OctetString Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.3
rcPrFilterAceProtoShowTcpSrcPortOper Operator for Ace Protocol TcpSrcPort. Not applicable to VSP9000	Enumeration Enumerated Values: 1 eq 8 mask 9 range	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.4
rcPrFilterAceProtoShowUdpSrcPort Port Number or Port List to match on. Not applicable to VSP9000	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.5
rcPrFilterAceProtoShowUdpSrcPortOper Operator for Ace Protocol UdpSrcPort. Not applicable to VSP9000	Enumeration Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.6
rcPrFilterAceProtoShowTcpDstPort Port Number or Port List to match on. Not applicable to VSP9000	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.7
rcPrFilterAceProtoShowTcpDstPortOper Operator for Ace Protocol TcpDstPort. Not applicable to VSP9000	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.8
rcPrFilterAceProtoShowUdpDstPort Port Number or Port List to match on. Not applicable to VSP9000	OctetString Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.9
rcPrFilterAceProtoShowUdpDstPortOper Operator for Ace Protocol UdpDstPort. Not applicable to VSP9000	Enumeration Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.10
rcPrFilterAceProtoShowIcmpMsgTypeList One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11
rcPrFilterAceProtoShowIcmpMsgTypeOper Operator for Ace Protocol IcmpMsgTypes.	Enumeration Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12
rcPrFilterAceProtoShowTcpFlagsList One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63	OctetString Enumerated Values: 1 eq 8 mask 9 range	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13
rcPrFilterAceProtoShowTcpFlagsOper Operator for Ace Protocol TcpFlags.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14
rcPrFilterAceProtoShowSrcPort Port Number or Port List to match on.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15
rcPrFilterAceProtoShowSrcPortOper Operator for Ace Protocol SrcPort.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16
rcPrFilterAceProtoShowSrcPortOperMaskRange The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoSrcPortOper is set to 'range'. ('range' is not supported in…	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17
rcPrFilterAceProtoShowDstPort Port Number or Port List to match on.	OctetString Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18
rcPrFilterAceProtoShowDstPortOper Operator for Ace Protocol DstPort.	Enumeration Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19
rcPrFilterAceProtoShowDstPortOperMaskRange The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoDstPortOper is set to 'range'. ('range' is not supported in…	Integer32 Enumerated Values: 1 no-operation 2 max-segment-size 3 wsopt 4 sack-permitted 5 sack 8 tsopt 9 partial-order-conn-perm 10 partial-order-service-profile 11 cc 12 cc-new 13 cc-echo 14 tcp-alt-checksum-req 15 tcp-alt-checksum-data 19 md5 27 quick-start-resp 28 user-timeout-opt	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20
rcPrFilterAceProtoShowTcpFlagsOperMask The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAceProtoTcpFlagsOper is set to eq	Integer32 Enumerated Values: 5 any	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21
rcPrFilterAceProtoShowRoutingTypeType Value of Protocol routing-type.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.22
rcPrFilterAceProtoShowRoutingTypeOper Operator for Ace Protocol RoutingType.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.23
rcPrFilterAceProtoShowIcmpv6MsgTypeList One or a list of ICMPv6 messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.24
rcPrFilterAceProtoShowIcmpv6MsgTypeOper Operator for Ace Protocol Icmpv6MsgTypes.	Enumeration Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.25

rcPrFilterAcePatternShowTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.28 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAcePatternShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAcePatternShowTable'

Copy

A table of Aces to store Pattern 1, 2, 3 
Header information of each Ace in context of
its parent Acl.

rcPrFilterAcePatternShowEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1

One Ace entry holding Ace Pattern 1, 2, 3
information. Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAcePatternShowAclId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Enumerated Values: 1 eq	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1
rcPrFilterAcePatternShowAceId An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2
rcPrFilterAcePatternShowPattern1Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3
rcPrFilterAcePatternShowPattern1Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4
rcPrFilterAcePatternShowPattern1Oper Operators for Ace Pattern.	Enumeration Constraints: range: 1-2048	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5
rcPrFilterAcePatternShowPattern2Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetString Constraints: range: 1-2000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6
rcPrFilterAcePatternShowPattern2Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7
rcPrFilterAcePatternShowPattern2Oper Operators for Ace Pattern.	Enumeration Enumerated Values: 1 eq	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8
rcPrFilterAcePatternShowPattern3Name A descriptive name chosen by the administrator for the Ace Pattern Entry.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9
rcPrFilterAcePatternShowPattern3Value Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set …	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10
rcPrFilterAcePatternShowPattern3Oper Operators for Ace Pattern.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11

rcPrFilterAceIpv6SrcAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.29 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpv6SrcAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpv6SrcAddrTable'

Copy

A table of Aces to store IPv6 Source Address Header
information of each Ace in context of its parent Acl.

rcPrFilterAceIpv6SrcAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1

One Ace entry holding Ace IPv6 Source Address Header
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpv6SrcAddrAclId An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-1500	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1
rcPrFilterAceIpv6SrcAddrAceId An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2
rcPrFilterAceIpv6SrcAddrList The list of ipv6 source address to match from IPv6 header.	OctetStringr/w Enumerated Values: 1 eq	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3
rcPrFilterAceIpv6SrcAddrListCountobsolete Count to store the number of discrete ranges entered for the ipv6 src address.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4
rcPrFilterAceIpv6SrcAddrOper Operators for Ace Ipv6 Source Address.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5
rcPrFilterAceIpv6SrcAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6
rcPrFilterAceIpv6SrcAddrOperMask The ipv6 mask value when rcPrFilterAceIpv6SrcAddrOper mask is selected.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.7

rcPrFilterAceIpv6DstAddrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.30 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpv6DstAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpv6DstAddrTable'

Copy

A table of Aces to store IPv6 Destination Address
Header information of each Ace in context of its
parent Acl.

rcPrFilterAceIpv6DstAddrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1

One Ace entry holding Ace IPv6 Destination Address
Header information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpv6DstAddrAclId An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1
rcPrFilterAceIpv6DstAddrAceId An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2
rcPrFilterAceIpv6DstAddrList The list of ipv6 dst address to match from IPv6 header.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3
rcPrFilterAceIpv6DstAddrListCountobsolete Count to store the number of discrete ranges entered for the IPv6 Destination Address.	Integer32r/w Enumerated Values: 1 up 2 down 3 testing 4 unknown	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4
rcPrFilterAceIpv6DstAddrOper Operators for Ace IPv6 Destination Address.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5
rcPrFilterAceIpv6DstAddrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6
rcPrFilterAceIpv6DstAddrOperMask The ipv6 mask value when rcPrFilterAceIpv6DstAddrOper mask is selected.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.7

rcPrFilterAceIpv6NextHdrTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.31 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpv6NextHdrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpv6NextHdrTable'

Copy

A table of Aces to store IPv6 Next header
Header information of each Ace in context of its
parent Acl.

rcPrFilterAceIpv6NextHdrEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1

One Ace entry holding Ace IPv6 Next header
information. An Ace is a member of one Acl.

Indexes

rcVrfId

Column	Syntax	OID
rcPrFilterAceIpv6NextHdrAclId An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1
rcPrFilterAceIpv6NextHdrAceId An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2
rcPrFilterAceIpv6NextHdrNextHdr The ipv6 next header to look for.	Ipv6NextHdrr/w Type Values: 0 hop-by-hop 1 icmpv4 2 igmpv4 4 ipInIp 6 tcp 8 egp 17 udp 41 ipv6 43 routing 44 frag 46 rsvp 50 ipsecESP 51 ipsecAh 58 icmpv6 59 noNxtHdr 60 destOptions 255 undefined	.1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3
rcPrFilterAceIpv6NextHdrOper Operators for Ace IPv6 Next header.	Enumerationr/w Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4
rcPrFilterAceIpv6NextHdrRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5

rcPrFilterAceIpv6ShowTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.32 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpv6ShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpv6ShowTable'

Copy

A table of Aces to display ipv6
information of each Ace in context of
its parent Acl.

rcPrFilterAceIpv6ShowEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1

One Ace entry holding Ace ipv6 information.
Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpv6ShowAclId An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1
rcPrFilterAceIpv6ShowAceId An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2
rcPrFilterAceIpv6ShowSrcAddrList The list of Ipv6 source address to display.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3
rcPrFilterAceIpv6ShowSrcAddrOper Operators for Ace Ipv6 Source Address.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4
rcPrFilterAceIpv6ShowDstAddrList List of Ipv6 destination address to display.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5
rcPrFilterAceIpv6ShowDstAddrOper Operators for Ace Ipv6 Destination Address.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6
rcPrFilterAceIpv6ShowNxtHdrNxtHdr Ipv6 next hdr to display.	Ipv6NextHdr Enumerated Values: 1 perVrfperNexthop 2 perVrf	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7
rcPrFilterAceIpv6ShowNxtHdrOper Operator for Ace Ipv6 next hdr.	Enumeration	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8
rcPrFilterAceIpv6ShowTrafficClsOper Operator for Ace Ipv6 Traffic Class	Enumeration Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.9
rcPrFilterAceIpv6ShowTrafficCls Ipv6 traffic class value to display.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.10
rcPrFilterAceIpv6ShowSrcAddrMask ipv6 SrcAddr Mask value to display.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.11
rcPrFilterAceIpv6ShowDstAddrMask ipv6 DstAddr Mask value to display.	OctetString	.1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.12

rcPrFilterAceProtoSrcPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.33 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoSrcPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoSrcPortTable'

Copy

A table of Aces to store TCP/UDP Source Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoSrcPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1

One entry holding Ace Protocol TCP/UDP Source Port
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoSrcPortAclId An index to the AceProtoSrcPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1
rcPrFilterAceProtoSrcPortAceId An index to the AceProtoSrcPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2
rcPrFilterAceProtoSrcPortPort Port Number or Port List to match on.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3
rcPrFilterAceProtoSrcPortCount Count to store the number of discrete ranges entered for the TCP source port.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4
rcPrFilterAceProtoSrcPortOper Operator for Ace Protocol SrcPort.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5
rcPrFilterAceProtoSrcPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-18 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6
rcPrFilterAceProtoSrcPortOperMaskRange The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoSrcPortOper is set to 'range'. ('range' is not supported in…	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7

rcPrFilterAceProtoDstPortTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.34 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoDstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoDstPortTable'

Copy

A table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoDstPortEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1

One entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl.

Indexes

rcCbSwitchingEngine9600Id

Column	Syntax	OID
rcPrFilterAceProtoDstPortAclId An index to the AceProtoDstPortEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1
rcPrFilterAceProtoDstPortAceId An index to the AceProtoDstPortEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2
rcPrFilterAceProtoDstPortPort Port Number or Port List to match on.	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3
rcPrFilterAceProtoDstPortCount Count to store the number of discrete ranges entered for the TCP dest port.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4
rcPrFilterAceProtoDstPortOper Operator for Ace Protocol DstPort.	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5
rcPrFilterAceProtoDstPortRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-640 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6
rcPrFilterAceProtoDstPortOperMaskRange The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProtoDstPortOper is set to 'range'. ('range' is not supported in…	Integer32r/w Enumerated Values: 1 sci 2 sfi	.1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7

rcPrFilterAceProtoTcpOptionTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.35 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoTcpOptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoTcpOptionTable'

Copy

A table of Aces to store TCP Option information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoTcpOptionEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1

One entry holding Ace Protocol TCP option
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoTcpOptionAclId An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 21-26	.1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1
rcPrFilterAceProtoTcpOptionAceId An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2
rcPrFilterAceProtoTcpOptionHeader TCP options to be matched from the TCP Header. 1 No-Operation 2 MaximumSegmentSize 3 WSOPT - Window Scale 4 SACK Permitted 5 SACK 8 TSOPT - Time Stamp Option 9 Partial Order Connection Permitted 10 Partial …	Enumerationr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3
rcPrFilterAceProtoTcpOptionOper Logical Operator - only 'any' is valid at present.	Enumerationr/w Constraints: range: 1-640	.1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4
rcPrFilterAceProtoTcpOptionRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 sci 2 sfi Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5

rcPrFilterAceIpv6TrafficClsTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.36 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceIpv6TrafficClsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceIpv6TrafficClsTable'

Copy

A table of Aces to store IPv6 Traffic Class
Header information of each Ace in context of its
parent Acl.

rcPrFilterAceIpv6TrafficClsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1

One Ace entry holding Ace IPv6 Traffic Class
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceIpv6TrafficClsAclId An index to the AceIpv6TrafficClsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.1
rcPrFilterAceIpv6TrafficClsAceId An index to the AceIpv6TrafficClsEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.2
rcPrFilterAceIpv6TrafficClsRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.3
rcPrFilterAceIpv6TrafficClsOper Operators for Ace IPv6 Traffic Class	Enumerationr/w Constraints: range: 1-1152	.1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.4
rcPrFilterAceIpv6TrafficClsTrafficCls Ipv6 Traffic Class value	Integer32r/w Enumerated Values: 1 sci 2 sfi	.1.3.6.1.4.1.2272.1.202.1.1.2.4.36.1.5

rcPrFilterAceProtoRoutingTypeTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.37 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoRoutingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoRoutingTypeTable'

Copy

A table of Ace's to store IPv6 Routing header type
information of each Ace in context of its
parent Acl.

rcPrFilterAceProtoRoutingTypeEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1

One Ace entry holding Ace IPv6 routing header type
information. An Ace is a member of one Acl.

Indexes

No indexes recorded

Column	Syntax	OID
rcPrFilterAceProtoRoutingTypeAclId An index to the AceProtoRoutingTypeEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.1
rcPrFilterAceProtoRoutingTypeAceId An index to the AceProtoRoutingTypeEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.2
rcPrFilterAceProtoRoutingTypeType The ipv6 routing header type to look for.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.3
rcPrFilterAceProtoRoutingTypeOper Operators for Ace IPv6 routing header type.	Enumerationr/w Constraints: range: 1-72	.1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.4
rcPrFilterAceProtoRoutingTypeRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.37.1.5

rcPrFilterAceProtoIcmpv6MsgTypeTable

table

.1.3.6.1.4.1.2272.1.202.1.1.2.4.38 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPrFilterAceProtoIcmpv6MsgTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPrFilterAceProtoIcmpv6MsgTypeTable'

Copy

A table of Aces to store ICMPv6 message type information
of each Ace in context of its parent Acl.

rcPrFilterAceProtoIcmpv6MsgTypeEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1

One entry holding Ace ICMPv6 message type
information. An Ace is a member of one Acl.

Indexes

rcVrrpTmpOperationsIfIndex rcVrrpTmpOperationsInetAddrType rcVrrpTmpOperationsVrId

Column	Syntax	OID
rcPrFilterAceProtoIcmpv6MsgTypeAclId An index to the AceProtoIcmpv6MsgTypeEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.1
rcPrFilterAceProtoIcmpv6MsgTypeAceId An index to the AceProtoIcmpv6MsgTypeEntry, a unique identifier for Ace entry in the range of Table Size.	Integer32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.2
rcPrFilterAceProtoIcmpv6MsgTypeList One or a list of ICMPv6 messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).	OctetStringr/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.3
rcPrFilterAceProtoIcmpv6MsgTypeCount Count to store the number of discrete ranges entered for the ICMP message types.	Integer32r/w	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.4
rcPrFilterAceProtoIcmpv6MsgTypeOper Operator for Ace Protocol Icmpv6MsgTypes.	Enumerationr/w Enumerated Values: 1 initialize 2 backup 3 master	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.5
rcPrFilterAceProtoIcmpv6MsgTypeRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.38.1.6

rcVrfConfigTable

table

.1.3.6.1.4.1.2272.1.203.1.1.1.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrfConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrfConfigTable'

Copy

This table is for creating the new Virtual Routers.

rcVrfConfigEntry row .1.3.6.1.4.1.2272.1.203.1.1.1.2.1

The entries in this table can be added/deleted
using the rcVrfRowStatus.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrfId The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1
rcVrfRowStatus The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishi…	SNMPv2-TCRowStatusr/w Constraints: range: 1-4096 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2
rcVrfName The Name of the Virtual Router.	OctetStringr/w	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3
rcVrfContextName The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management.	OctetStringr/w	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4
rcVrfTrapEnable This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5
rcVrfMaxRoutes This object specifies the maximum number of routes that this VRF can support. The default value is 10000.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6
rcVrfAdminStatus The administrative state of the Virtual Router.	Enumerationr/w	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7
rcVrfVpnId The Virtual Private Network Identifier of the Virtual Router.	VPNIdr/w Type Constraints: range: 7	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8
rcVrfRpTrigger This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple RPs can be acted on simultaneously. Also, individual RPs c…	VrfRpTriggerBitCoder/w Type Values: 0 rip 1 ospf 2 bgp 3 isis 4 pim 5 mvr 6 pim6 7 msdp	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9
rcVrfMaxRoutesTrapEnable This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes Exceeded Traps Disabled	SNMPv2-TCTruthValuer/w Constraints: range: 0-0 range: 4-4 range: 16-16 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10

rcVrfStatTable

table

.1.3.6.1.4.1.2272.1.203.1.1.2.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrfStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrfStatTable'

Copy

This table contains statistics for the Virtual Router.

rcVrfStatEntry row .1.3.6.1.4.1.2272.1.203.1.1.2.2.1

Entries in this table are per rcVrfId.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrfStatRouteEntries Total number of routes for this VRF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1
rcVrfStatFIBEntries Total number of FIB Entries for this VRF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2
rcVrfStatUpTime The time in (in hundredths of a second) since this VRF entry has been operational.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3
rcVrfOperStatus The operational status of the Virtual Router.	Enumeration	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4
rcVrfRpStatus This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-code that specifies the status of the RPs. The …	VrfRpTriggerBitCode Type Values: 0 rip 1 ospf 2 bgp 3 isis 4 pim 5 mvr 6 pim6 7 msdp	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5
rcVrfRouterAddressType Router Address Type of this VRF.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6
rcVrfRouterAddress Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, loopback interface is optional.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7

rcVrfIpVpnTable

table

.1.3.6.1.4.1.2272.1.203.1.1.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrfIpVpnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrfIpVpnTable'

Copy

Table required to configure vpn under ip.

rcVrfIpVpnTableEntry row .1.3.6.1.4.1.2272.1.203.1.1.4.1

Entries in this table are per rcVrfId.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrfIpVpnVrfId The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other attributes like the vrf name, rcVrfMaxRoutesTrapEnable etc.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.203.1.1.4.1.1
rcVrfIpVpnStatus The status of IpVpn.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.203.1.1.4.1.2
rcVrfIpVpnImportRTList The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode.	IdListr/w	.1.3.6.1.4.1.2272.1.203.1.1.4.1.3
rcVrfIpVpnExportRTList The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode.	IdListr/w	.1.3.6.1.4.1.2272.1.203.1.1.4.1.4
rcVrfIpVpnSvcLblAllocOpt The service label allocation option for the ipvpn	Enumerationr/w	.1.3.6.1.4.1.2272.1.203.1.1.4.1.5
rcVrfIpVpnRowStatus RowStatus for the Vpn Entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.203.1.1.4.1.6
rcVrfIpVpnIsidNumber IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged.	Integer32r/w	.1.3.6.1.4.1.2272.1.203.1.1.4.1.7

rcVrfNameTable

table

.1.3.6.1.4.1.2272.1.203.1.1.5 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrfNameTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrfNameTable'

Copy

This table is for EDM and SNMP agent to get source vrf name
for inter-vrf route redistribute.

rcVrfNameEntry row .1.3.6.1.4.1.2272.1.203.1.1.5.1

Each entry has the vrfid and name for source vrf needed by
inter-vrf route redistribute.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrfNameVrfId The unique id of this virtual router instance.	VrfIdentifier Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.203.1.1.5.1.1
rcVrfNameVrfName The Name of the Virtual Router.	OctetString	.1.3.6.1.4.1.2272.1.203.1.1.5.1.2

rcCbQueuingEngine2kTable

table

.1.3.6.1.4.1.2272.1.204.1.1.1.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbQueuingEngine2kTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbQueuingEngine2kTable'

Copy

Table containing the 2k based queuing engine
entries for the system.

rcCbQueuingEngine2kEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.2.1

Entry for the QE Table

Indexes

No indexes recorded

Column	Syntax	OID
rcCbQueuingEngine2kId Index for an entry in the QE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- IO on slot 3: 1..3 IO on slot 4: 4..6 CP on slot 1: 7 CP on slot 2: …	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1
rcCbQueuingEngine2kStatus Status of a given QE interface.	DeviceStatus Enumerated Values: 1 none 2 preemptHoldDownTimer	.1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2

rcCbSwitchingEngine4kTable

table

.1.3.6.1.4.1.2272.1.204.1.1.1.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbSwitchingEngine4kTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbSwitchingEngine4kTable'

Copy

Table containing the 4k based switching
engine entries for the system.

rcCbSwitchingEngine4kEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.3.1

Entry for the SE Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcCbSwitchingEngine4kId Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- SF on slot 13: 1..3 SF on slot 14: 4..6 ... SF on slot 18: 16..18	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1
rcCbSwitchingEngine4kStatus Status of a given SE Device.	DeviceStatus Type Values: 1 invalid 2 down 3 up 4 disabled	.1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2

rcCbSwitchingEngine9600Table

table

.1.3.6.1.4.1.2272.1.204.1.1.1.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbSwitchingEngine9600Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbSwitchingEngine9600Table'

Copy

Table containing the 9600 based switching
engine entries for the system.

rcCbSwitchingEngine9600Entry row .1.3.6.1.4.1.2272.1.204.1.1.1.4.1

Entry for the SE 9600 Table.

Indexes

No indexes recorded

Column	Syntax	OID
rcCbSwitchingEngine9600Id Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- SF on slot 21: 1..2 SF on slot 22: 3..4 ... SF on slot 26: 11..12	Integer32 Enumerated Values: 1 dormant 2 active	.1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1
rcCbSwitchingEngine9600Status Status of a given Fast SE Device.	DeviceStatus Constraints: range: 0-21600 Type Values: 1 invalid 2 down 3 up 4 disabled	.1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2
rcCbSwitchingEngine9600Mode Mode of given Fast SE Device either BME or SE.	SfDeviceMode Constraints: range: 200-1000 Type Values: 1 other 2 bme 3 se	.1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3

rcCbQe2kSerdesLinkTable

table

.1.3.6.1.4.1.2272.1.204.1.1.1.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbQe2kSerdesLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbQe2kSerdesLinkTable'

Copy

Table containing the Serdes Link Information
for the system.

rcCbQe2kSerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.5.1

Entry for a QE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.

Indexes

No indexes recorded

Column	Syntax	OID
rcCbQe2kSerdesLinkId This ID maps to a particular serdes port number for the identified device. Here's the mapping: rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1 ... rcCbQe2kSerdesLinkId 20 = port 19; Slot 3; QE Devi…	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1
rcCbQe2kSerdesLinkType Link type of the serdes interface	Enumeration	.1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2
rcCbQe2kSerdesLinkStatus Interface Status	DeviceStatus Type Values: 1 invalid 2 down 3 up 4 disabled	.1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3
rcCbQe2kSerdesLinkConnectedToDevice The SE/BME ID to which the QE2k ID is attached to. Note that IDs 16 & 18 are unused.	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4
rcCbQe2kSerdesLinkConnectedToSlot The slot number of the switch fabric card to which the QE2k ID is attached to.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5

rcCbSESerdesLinkTable

table

.1.3.6.1.4.1.2272.1.204.1.1.1.6 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbSESerdesLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbSESerdesLinkTable'

Copy

Table containing the Serdes Link Information
for the system.

rcCbSESerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.6.1

Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.

Indexes

No indexes recorded

Column	Syntax	OID
rcCbSESerdesLinkId This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 33 = port 0; Slot 21; Device 2 SESerdesLinkId…	Integer32 Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1
rcCbSESerdesLinkType Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi.	Enumeration	.1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2
rcCbSESerdesLinkStatus Interface Status	DeviceStatus Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3
rcCbSESerdesLinkConnectedToDevice The QE2k ID to which the SE/BME ID is attached to.	Integer32 Enumerated Values: 1 mobTunnel 2 accessTunnel 3 resPeerAccessTunnel	.1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4
rcCbSESerdesLinkConnectedToSlot The slot number of the switch fabric card to which the QE2k ID is attached to.	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5

rcCbSE9600SerdesLinkTable

table

.1.3.6.1.4.1.2272.1.204.1.1.1.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbSE9600SerdesLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbSE9600SerdesLinkTable'

Copy

Table containing the Fast Serdes Link Information
for the system.

rcCbSE9600SerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.7.1

Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.

Indexes

No indexes recorded

Column	Syntax	OID
rcCbSE9600SerdesLinkId This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 97 = port 0; Slot 21; Device 2 SESerdesLink…	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1
rcCbSE9600SerdesLinkType Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi.	Enumeration	.1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2
rcCbSE9600SerdesLinkStatus Interface Status	DeviceStatus Type Values: 1 invalid 2 down 3 up 4 disabled	.1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3
rcCbSE9600SerdesLinkConnectedToDevice The QE2k ID to which the SE/BME ID is attached to.	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4
rcCbSE9600SerdesLinkConnectedToSlot The slot number of the switch fabric card to which the QE2k ID is attached to.	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5

rcCbSPITable

table obsolete

.1.3.6.1.4.1.2272.1.204.1.1.1.8 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcCbSPITable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcCbSPITable'

Copy

Table containing the system peripheral interface info.

rcCbSPIEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.8.1

SPI table entry

Indexes

No indexes recorded

Column	Syntax	OID
rcCbSPIIdobsolete The Index for the SPI Table. Here is the layout of the IDs in relation to the system: Location ID(s) --------------------- Slot 1: 1..6 Slot 2: 7..12 ... Slot 12: 57..72 Current impleme…	Integer32	.1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1
rcCbSPIStatusobsolete SPI Status	DeviceStatus Type Values: 1 invalid 2 down 3 up 4 disabled	.1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2

rcVrrpTmpOperationsTable

table

.1.3.6.1.4.1.2272.1.206.1.1.7 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpTmpOperationsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpTmpOperationsTable'

Copy

Unified Operations table for a VRRP router which
consists of a sequence (i.e., one or more conceptual
rows) of 'rcVrrpTmpOperationsEntry' items which describe
the operational characteristics of a virtual router.

rcVrrpTmpOperationsEntry row .1.3.6.1.4.1.2272.1.206.1.1.7.1

An entry in the rcVrrpTmpOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIn…

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpTmpOperationsIfIndex Interface index on which the virtual router is configured.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.206.1.1.7.1.1
rcVrrpTmpOperationsInetAddrType The IP address type of RcVrrpTmpOperationsEntry. This value applies to both rcVrrpTmpOperationsMasterIpAddr and rcVrrpTmpOperationsPrimaryIpAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.206.1.1.7.1.2
rcVrrpTmpOperationsVrId This object contains the Virtual Router Identifier (VRID).	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2272.1.206.1.1.7.1.3
rcVrrpTmpOperationsVirtualMacAddr The virtual MAC address of the virtual router. Although this object can be derived from the 'rcVrrpTmpOperationsVrId' object, it is defined so that it is easily obtainable by a management application and can be included…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.206.1.1.7.1.4
rcVrrpTmpOperationsState The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup event. - `backup', which indicates the virtual rout…	Enumeration	.1.3.6.1.4.1.2272.1.206.1.1.7.1.5
rcVrrpTmpOperationsPriority This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that…	Integer32r/w	.1.3.6.1.4.1.2272.1.206.1.1.7.1.6
rcVrrpTmpOperationsAddrCount The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the rcVrrpTmpAssociatedAddrTable that correspond to a given IP version/VRID/ifIndex.	Integer32 Enumerated Values: 1 none 2 reset	.1.3.6.1.4.1.2272.1.206.1.1.7.1.7
rcVrrpTmpOperationsMasterIpAddr The master router's real IP address. Master router would set this address to rcVrrpTmpOperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP address listed as the source in VRRP …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.206.1.1.7.1.8
rcVrrpTmpOperationsPrimaryIpAddr In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the rcVrrpTmpOperationsMasterIpAddr', should the virtu…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.206.1.1.7.1.9
rcVrrpTmpOperationsAdvInterval The time interval between sending advertisement messages. Only the master router sends VRRP advertisements. It is configured in seconds, but it is converted into centiseconds that is used in the VRRP packets.	secondsInteger32r/w Enumerated Values: 1 yahoo 2 gtalk 3 avaya	.1.3.6.1.4.1.2272.1.206.1.1.7.1.10
rcVrrpTmpOperationsPreemptMode Controls whether a higher priority virtual router will preempt a lower priority master.	SNMPv2-TCTruthValuer/w Constraints: range: 0-255 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.206.1.1.7.1.11
rcVrrpTmpOperationsAcceptMode Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is False. This object is not relevant for rows…	SNMPv2-TCTruthValuer/w Constraints: range: 1-49151 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.206.1.1.7.1.12
rcVrrpTmpOperationsUpTime This is the value of the `sysUpTime' object when this virtual router (i.e., the `rcVrrpTmpOperationsState') transitioned out of `initialized'.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.206.1.1.7.1.13
rcVrrpTmpOperationsStorageType The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.	SNMPv2-TCStorageTyper/w Enumerated Values: 1 asRequested 2 required Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.206.1.1.7.1.14
rcVrrpTmpOperationsRowStatus The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to active(1), no other objects in the conceptual row can be mod…	SNMPv2-TCRowStatusr/w Constraints: range: 0-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.206.1.1.7.1.15

rcVrrpTmpAssociatedIpAddrTable

table

.1.3.6.1.4.1.2272.1.206.1.1.8 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpTmpAssociatedIpAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpTmpAssociatedIpAddrTable'

Copy

The table of addresses associated with this virtual
router.

rcVrrpTmpAssociatedIpAddrEntry row .1.3.6.1.4.1.2272.1.206.1.1.8.1

An entry in the table contains an IP address that is
associated with a virtual router. The number of rows
for a given IP version, VrID and ifIndex will equal the
number of IP addresses associated (e.g., backed up) by
t…

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpTmpAssociatedIpAddr The assigned IP addresses that a virtual router is responsible for backing up. The size of this object is either 4 or 16 depending on rcVrrpTmpOperationsInetAddrType.	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.2272.1.206.1.1.8.1.1
rcVrrpTmpAssociatedIpAddrPrefixLength The length of the prefix (in bits).	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.206.1.1.8.1.2
rcVrrpTmpAssociatedStorageType The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.206.1.1.8.1.3
rcVrrpTmpAssociatedIpAddrRowStatus The RowStatus variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Setting this ob…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.206.1.1.8.1.4

rcVrrpTmpRouterStatisticsTable

table

.1.3.6.1.4.1.2272.1.206.1.2.5 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpTmpRouterStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpTmpRouterStatisticsTable'

Copy

Table of virtual router statistics.

rcVrrpTmpRouterStatisticsEntry row .1.3.6.1.4.1.2272.1.206.1.2.5.1

An entry in the table, containing statistics
information about a given virtual router.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpTmpStatisticsMasterTransitions The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicate…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.1
rcVrrpTmpStatisticsRcvdAdvertisements The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.2
rcVrrpTmpStatisticsAdvIntervalErrors The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. Discontinuities in the value of this counter can occur at r…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.3
rcVrrpTmpStatisticsIpTtlErrors The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Discontinuities in the value of this counter can occur at re-in…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.4
rcVrrpTmpStatisticsRcvdPriZeroPackets The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicat…	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.206.1.2.5.1.5
rcVrrpTmpStatisticsSentPriZeroPackets The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated b…	SNMPv2-SMICounter32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.206.1.2.5.1.6
rcVrrpTmpStatisticsRcvdInvalidTypePkts The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other tim…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.7
rcVrrpTmpStatisticsAddressListErrors The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value of this counter can occur at re-initialization of the manag…	SNMPv2-SMICounter32 Enumerated Values: 1 icmp 6 tcp 17 udp 58 icmpv6 89 ospfv3 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.8
rcVrrpTmpStatisticsPacketLengthErrors The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times…	SNMPv2-SMICounter32 Enumerated Values: 1 permit 2 drop Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.9
rcVrrpTmpStatisticsRcvdInvalidAuthentications The total number of packets received with an unknown authentication type.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.206.1.2.5.1.10
rcVrrpTmpStatisticsDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local manag…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.206.1.2.5.1.11
rcVrrpTmpStatisticsRefreshRate The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in this entry.	milli-secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.206.1.2.5.1.12

rcVrrpTmpRouterGlobalStatisticsTable

table

.1.3.6.1.4.1.2272.1.206.1.2.6 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpTmpRouterGlobalStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpTmpRouterGlobalStatisticsTable'

Copy

Table of virtual router global statistics. It shows the global statistics, depending on IP version.

rcVrrpTmpRouterGlobalStatisticsEntry row .1.3.6.1.4.1.2272.1.206.1.2.6.1

An entry in the table, containing global statistics information about a given IP type.

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpTmpRouterGlobalStatisticsInetAddrType The IP address type of rcVrrpTmpRouterGlobalStatisticsEntry. It can be either IPv4 or IPv6	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 sha1 2 aesXcbc 3 md5 4 null 5 sha2	.1.3.6.1.4.1.2272.1.206.1.2.6.1.1
rcVrrpTmpRouterGlobalStatisticsChecksumErrors The total number of VRRP packets received with an invalid VRRP checksum value.	SNMPv2-SMICounter64 Enumerated Values: 1 des3Cbc 2 aes128Cbc 3 aesCtr 4 null Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.206.1.2.6.1.2
rcVrrpTmpRouterGlobalStatisticsVersionErrors The total number of VRRP packets received with an unknown or unsupported version number.	SNMPv2-SMICounter64 Enumerated Values: 1 ah 2 es Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.206.1.2.6.1.3
rcVrrpTmpRouterGlobalStatisticsVrIdErrors The total number of VRRP packets received with an invalid VRID for this virtual router.	SNMPv2-SMICounter64 Enumerated Values: 1 transport 2 tunnel Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.206.1.2.6.1.4

rcVrrpExtOperationsTable

table

.1.3.6.1.4.1.2272.1.206.2.3.11 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVrrpExtOperationsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVrrpExtOperationsTable'

Copy

Unified Operations table for a VRRP router which consists of
a sequence (i.e., one or more conceptual rows) of
'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items
which describe the operational characteristics of a virtual
router.
This table is an extention of 'rcVrrpTmpOperationsTable'.It
contains the mib objects that are Nortel specific.

rcVrrpExtOperationsEntry row .1.3.6.1.4.1.2272.1.206.2.3.11.1

An entry in the rcVrrpExtOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIn…

Indexes

No indexes recorded

Column	Syntax	OID
rcVrrpExtOperationsAction Used to trigger an action on this vrrp interface.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.206.2.3.11.1.1
rcVrrpExtOperationsBackUpMaster Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT.	Enumerationr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.206.2.3.11.1.2
rcVrrpExtOperationsBackUpMasterState Indicate whether backup VRRP switch traffic forwarding is enabled or not.	Enumeration Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.206.2.3.11.1.3
rcVrrpExtOperationsCriticalIpAddr IP address of the interface that will cause a shutdown event.Only IPv6 address is supported as of now.	INET-ADDRESS-MIBInetAddressr/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.206.2.3.11.1.4
rcVrrpExtOperationsCriticalIpAddrEnabled Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (::). No effect if an user-defined IP address does not exist.	SNMPv2-TCTruthValuer/w Constraints: range: 1-4294967295 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.206.2.3.11.1.5
rcVrrpExtOperationsControl This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the ro…	Enumerationr/w	.1.3.6.1.4.1.2272.1.206.2.3.11.1.6
rcVrrpExtOperationsHoldDownTimer Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master.	secondsInteger32r/w	.1.3.6.1.4.1.2272.1.206.2.3.11.1.7
rcVrrpExtOperationsHoldDownState Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise.	Enumeration	.1.3.6.1.4.1.2272.1.206.2.3.11.1.8
rcVrrpExtOperationsHoldDownTimeRemaining Used to indicate the amount of time (in seconds) left before the rcVrrpExtOperationsHoldDownTimer will expire.	secondsInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.206.2.3.11.1.9
rcVrrpExtOperationsFasterAdvInterval This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead …	Integer32r/w	.1.3.6.1.4.1.2272.1.206.2.3.11.1.10
rcVrrpExtOperationsFasterAdvIntervalEnabled Used to indicate if the Faster Advertisement Interval should be used.'Disable' means use regular Advertisement interval.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.206.2.3.11.1.11
rcVrrpExtOperationsLinkLocalAddr The assigned virtual address of the router. For IPv6 it is the Linklocal addresses to the virtual router interface. For Ipv4 it is the IP address of the virtual interface.	INET-ADDRESS-MIBInetAddressr/w Enumerated Values: 1 inBound 2 outBound 3 bothDirections Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.206.2.3.11.1.12
rcVrrpExtOperationsGlobalIpAddr The assigned Global addresses to the virtual router interface. This mib object support only IPv6 address as of now. This object is not used anymore since we can have multiple global IPv6 IPs for an interface. rcVrrpTm…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.206.2.3.11.1.13
rcVrrpExtOperationsMasterAdvInterval This is the Advertisement Interval contained in advertisements received from the Master. This value is saved by virtual routers in the Backup state and is used to compute Skew_time and Master_Down_Interval. The initial …	millisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2272.1.206.2.3.11.1.14

rcWlanMobSwTunnelTable

table

.1.3.6.1.4.1.2272.1.207.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcWlanMobSwTunnelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcWlanMobSwTunnelTable'

Copy

this table contains entries of the Access and Mobility tunnels
that are established at the local switch.

rcWlanMobSwTunnelEntry row .1.3.6.1.4.1.2272.1.207.2.1

A peer mobility switch or an access point.With one rcWlanMobSwTunnelIntfId
there ccould be two endpoints with different rcWlanMobSwTunnelPeerDeviceId
in the case of mobility tunnel established with SMLT pair

Indexes

No indexes recorded

Column	Syntax	OID
rcWlanMobSwTunnelIntfId Used to display Logical Port (for example, WLAN tunnel) for the tunnel.	Integer32	.1.3.6.1.4.1.2272.1.207.2.1.1
rcWlanMobSwTunnelPeerDeviceId The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel.	SNMPv2-TCMacAddress Constraints: range: 0-32 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.207.2.1.2
rcWlanMobSwTunnelPeerAddrType This object indicates the type of internet address in the corresponding instance of rcWlanMobSwTunnelPeerAddr. Currently, only the values ipv4(1) and ipv6(2) are allowed.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.207.2.1.3
rcWlanMobSwTunnelPeerAddr The address of the peer mobility switch or access point. The type of address is indicated by the corresponding instance of rcWlanMobSwTunnelPeerAddrType.	OctetString Enumerated Values: 1 permit 2 drop	.1.3.6.1.4.1.2272.1.207.2.1.4
rcWlanMobSwTunnelPeerUdpPort Indicates the UDP port which the peer mobility switch or access point will use for control protocol communication with the local switch.	INET-ADDRESS-MIBInetPortNumber Enumerated Values: 1 inBound 2 outBound 3 bothDirections Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.207.2.1.5
rcWlanMobSwTunnelStatus Indicates the status of the mobility tunnel connection to this peer mobility switch, or the access tunnel to this access point.	Enumeration	.1.3.6.1.4.1.2272.1.207.2.1.6
rcWlanMobSwTunnelType The tunnel type.	Enumeration	.1.3.6.1.4.1.2272.1.207.2.1.7

rcWlanTunnelStatTable

table

.1.3.6.1.4.1.2272.1.207.4 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcWlanTunnelStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcWlanTunnelStatTable'

Copy

A table used to store wireless LAN tunnel statistics.

rcWlanTunnelStatEntry row .1.3.6.1.4.1.2272.1.207.4.1

interface counters

Indexes

No indexes recorded

Column	Syntax	OID
rcWlanTunnelStatInterfaceId Used to display Logical Port (for example, WLAN tunnel) for the tunnel.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.207.4.1.1
rcWlanTunnelStatPeerDeviceId The MAC address that uniquely identifies the peer mobility switch or access point on the other side of the tunnel.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.207.4.1.2
rcWlanTunnelStatBridgeInUnicastFrames The total number of incoming unicast frames that were bridged.	SNMPv2-SMICounter64 Enumerated Values: 1 up 2 down Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.3
rcWlanTunnelStatBridgeInMulticastFrames The total number of incoming multicast frames that were bridged.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.4
rcWlanTunnelStatBridgeInBroadcastFrames The total number of incoming broadcast frames that were bridged.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.5
rcWlanTunnelStatBridgeInDiscards The total number of frames that were discarded by the bridging entity.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.6
rcWlanTunnelStatBridgeOutFrames The total number of outgoing frames that were bridged.	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.207.4.1.7
rcWlanTunnelStatRouteInUnicastFrames The total number of incoming unicast frames that were routed.	SNMPv2-SMICounter64 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.207.4.1.8
rcWlanTunnelStatRouteInMulticastFrames The total number of incoming multicast frames that were routed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.9
rcWlanTunnelStatRouteInDiscards The total number of incoming frames that were discarded by the routing entity.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.10
rcWlanTunnelStatRouteOutUnicastFrames The total number of outgoing unicast frames that were routed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.11
rcWlanTunnelStatRouteOutMulticastFrames The total number of outgoing multicast frames that were routed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.12
rcWlanTunnelStatKeepaliveInFrames The total number of incoming keepalive frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.13
rcWlanTunnelStatKeepaliveOutFrames The total number of outgoing keepalive frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.14
rcWlanTunnelStatAllInFrames The total number of incoming frames that were bridged, routed and incoming keepalive frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.15
rcWlanTunnelStatAllOutFrames The total number of outgoing frames that were bridged, routed and outgoing keepalive frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.16
rcWlanTunnelStatAllInDiscardFrames The total number of incoming frames that were discarded.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.17
rcWlanTunnelStatAllOutDiscardFrames The total number of outgoing frames that were discarded.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.207.4.1.18
rcWlanTunnelStatReset This is an action object. When this object is set to reset(2), statistics for the tunnel will be cleared. Read on this object always returns none(1).	Enumerationr/w	.1.3.6.1.4.1.2272.1.207.4.1.19

rcVspTalkGroupTable

table

.1.3.6.1.4.1.2272.1.208.1.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVspTalkGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVspTalkGroupTable'

Copy

Vsp Talk Group includes IM configuraton and users

rcVspTalkGroupEntry row .1.3.6.1.4.1.2272.1.208.1.2.1

Entry of the IM group

Indexes

No indexes recorded

Column	Syntax	OID
rcVspTalkGroupType Type of vsp messaging group	Enumeration	.1.3.6.1.4.1.2272.1.208.1.2.1.1
rcVspTalkGroupServerAddress Messaging server address	OctetStringr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.2
rcVspTalkGroupServerPort The TCP port for Messaging	Integer32r/w	.1.3.6.1.4.1.2272.1.208.1.2.1.3
rcVspTalkGroupServerOldSslTypeEnable Enable/disable using old style SSL interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.208.1.2.1.4
rcVspTalkGroupServerEncryption Encrytion option.	Enumerationr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.5
rcVspTalkGroupServerProxy Messaging server proxy	OctetStringr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.6
rcVspTalkGroupClientUsername Messaging client Username for this device	OctetStringr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.7
rcVspTalkGroupClientPassword Password for rcVspTalkGroupClientUsername which is registered in the server.	OctetStringr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.8
rcVspTalkGroupClientMembers A list of members of this messaging group. There is a max of 12 members, with names seperated by comma	OctetStringr/w	.1.3.6.1.4.1.2272.1.208.1.2.1.9
rcVspTalkGroupEnable Adminstratively Enable/disable this messaging group	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.208.1.2.1.10
rcVspTalkGroupRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.208.1.2.1.11

rcIpsecPolicyTable

table

.1.3.6.1.4.1.2272.1.213.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecPolicyTable'

Copy

The policy table is used to store all the
attribute values under the policy. An IPSec
policy typically consists of a policy name,
raddr and laddr to which the policy is associated 
to, the protocol to which policy is applied,and 
the associated action whether to permit or drop
the packets

rcIpsecPolicyEntry row .1.3.6.1.4.1.2272.1.213.1.1

An Ipsec Policy table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecPolicyName This object contains name of the Ipsec policy.	OctetString	.1.3.6.1.4.1.2272.1.213.1.1.1
rcIpsecPolicyDstAddressType This object specifies the type of address field in the rcIpsecPolicyDstAddress. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.213.1.1.2
rcIpsecPolicyDstAddress The destination interface address to which the policy is added.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.213.1.1.3
rcIpsecPolicySrcAddressType This object specifies the type of address field in the rcIpsecPolicySrcAddress. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.213.1.1.4
rcIpsecPolicySrcAddress The source interface address of the router to which the policy is added.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.213.1.1.5
rcIpsecPolicySrcPort The TCP/UDP source port number for which the policy is added.	Integer32r/w	.1.3.6.1.4.1.2272.1.213.1.1.6
rcIpsecPolicyDstPort The TCP/UDP destination port number for which the policy is added.	Integer32r/w	.1.3.6.1.4.1.2272.1.213.1.1.7
rcIpsecPolicyAdminFlag The flag is used to enable the policy created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.213.1.1.8
rcIpsecPolicyL4Protocol This object specifies the IP protocol number for the l4 protocol to which this particular policy is added.	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.1.1.9
rcIpsecPolicyAction The object contains a value that set the action for the IPSec policy, either to permit or drop the packet.	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.1.1.10
rcIpsecPolicyRowStatus Used to create/delete entries in the rcIpsecPolicyTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.213.1.1.11

rcIpsecSATable

table

.1.3.6.1.4.1.2272.1.213.2 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecSATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecSATable'

Copy

The Security Association(SA) table is used to 
store all the attribute values under the security 
association. An IPSec SA typically consists of SA 
name, security parameter index, encapsulation 
protocol, authentication algorithm, encryption 
algorithm, mode of SA, key mode used and SA lifetime.

rcIpsecSAEntry row .1.3.6.1.4.1.2272.1.213.2.1

A Security Association structure table
entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecSAName This object contains name of the security association.	OctetString	.1.3.6.1.4.1.2272.1.213.2.1.1
rcIpsecSASpi This object contains, Security Parameter Index (SPI), which is an identification tag added to the header. This along with protocol value and destination are used to identify a SA	Unsigned32r/w	.1.3.6.1.4.1.2272.1.213.2.1.2
rcIpsecSAHashAlgorithm This object contains the hash algorithm used in this SA. The algorithms used are SHA1, AES_CBC, MD5 and SHA2	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.2.1.3
rcIpsecSAEncryptAlgorithm This object contains the encryption algorithm used in this SA. The algorithms used are 3DES_CBC, AES128_CBC and AES_CTR	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.2.1.4
rcIpsecSAAuthMethod This object specifies authentication Method of the SA. It can be AH (Authentication Header) or ES (Encapsulated Security Payload).	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.2.1.5
rcIpsecSAMode This flag is used to switch between transport and tunnel mode. Transport mode is used to protect the upper layer protocols whereas tunnel mode is used to protect the whole IP packet.	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.2.1.6
rcIpsecSAKeyMode This flag selects configuration mode of shared keys, manual or automatic.	Enumerationr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.213.2.1.7
rcIpsecSAEncryptKeyName Key Value for the Encryption Key. Maximum size is 64	OctetStringr/w Enumerated Values: 1 rwa 2 rw 3 l1 4 l2	.1.3.6.1.4.1.2272.1.213.2.1.8
rcIpsecSAHashKeyName Key value for the Hash Key. Maximum size is 64.	OctetStringr/w	.1.3.6.1.4.1.2272.1.213.2.1.9
rcIpsecSAHashKeyLength Number of bits used in the Hash key. The values are as follows: AES-XCBC-MAC - 32 MD5 - 32 SHA1 - 40 SHA2 - 64	Integer32r/w	.1.3.6.1.4.1.2272.1.213.2.1.10
rcIpsecSAEncryptKeyLength Number of bits used in the Encryption key. The values are as follows: 3DES - 48 AES-CBC - 32, 48, 64 AES-CTR - 32	Integer32r/w	.1.3.6.1.4.1.2272.1.213.2.1.11
rcIpsecSALifetimeSeconds The life time in seconds for a security association.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.213.2.1.12
rcIpsecSALifetimeKbytes The traffic, in kilobytes, that can pass between IPSec peers using a given security association before that security association expires.	Unsigned32r/w	.1.3.6.1.4.1.2272.1.213.2.1.13
rcIpsecSARowStatus Used to create/delete entries in the rcIpsecSATable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.213.2.1.14

rcIpsecInterfacePolicyTable

table

.1.3.6.1.4.1.2272.1.213.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecInterfacePolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecInterfacePolicyTable'

Copy

This table is used to store the policy and 
interface details while linking the policy 
to an interface. This table contains the                               
policy name, ifindex, direction on which
the policy is applied and the enable flag to
enable/disable ipsec on the interface.

rcIpsecInterfacePolicyEntry row .1.3.6.1.4.1.2272.1.213.3.1

A Policy interface link table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecInterfacePolicyName This object contains name of the Ipsec policy that is to be linked with the interface.	OctetString	.1.3.6.1.4.1.2272.1.213.3.1.1
rcIpsecInterfacePolicyIfIndex If index to which the policy is applied.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.213.3.1.2
rcIpsecInterfacePolicyIfEnabled The value for this attribute is set when Ipsec is enabled on the interface and admin state of the policy is in enabled state	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.213.3.1.3
rcIpsecInterfacePolicyIfDirection This object contains the direction of traffic in the interface, where security needs to be applied. Whether its inBound, outBound or both Directions	Enumerationr/w Enumerated Values: 1 none 2 flushGrpMember 3 flushMrouter 4 flushSender	.1.3.6.1.4.1.2272.1.213.3.1.4
rcIpsecInterfacePolicyRowStatus Used to create/delete entries in the rcIpsecInterfacePolicyTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.213.3.1.5

rcIpsecOspf6VirtualLinkPolicyTable

table

.1.3.6.1.4.1.2272.1.213.4 · 1 row entry · 14 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecOspf6VirtualLinkPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecOspf6VirtualLinkPolicyTable'

Copy

This table is used to store all the
attribute values under Ospf virtual
link policy.  This table contains the 
virtual link area id, neighbour id, SA name
policy action, policy direction, admin status 
of the policy, source address, destination 
address, virtual link id, interface index
and operation status of the virtual link.

rcIpsecOspf6VirtualLinkPolicyEntry row .1.3.6.1.4.1.2272.1.213.4.1

An OSPF virtual link Policy table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecOspf6VirtualLinkPolicyAreaId A 32-bit integer uniquely identifying the Ospf virtual link area.	SNMPv2-SMIIpAddress Enumerated Values: 1 version1 2 version2 Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.213.4.1.1
rcIpsecOspf6VirtualLinkPolicyNeighbor A 32-bit integer uniquely identifying the Ospf virtual link neighbour.	SNMPv2-SMIIpAddress Enumerated Values: 1 snoop 2 pim 3 snoopSpb 4 routerSpb 5 dvmrp 6 none Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.213.4.1.2
rcIpsecOspf6VirtualLinkPolicySAName This object contains the security association linked to the virtual link.	OctetStringr/w	.1.3.6.1.4.1.2272.1.213.4.1.3
rcIpsecOspf6VirtualLinkPolicyAdminStatus The flag is used to enable the policy created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.213.4.1.4
rcIpsecOspf6VirtualLinkPolicyAction The object contains a value that set the action of the IPSec Ospf virtual link policy, either to permit or drop.	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.4.1.5
rcIpsecOspf6VirtualLinkPolicyDirection The object indicates the policy direction for the virtual link.	Enumerationr/w	.1.3.6.1.4.1.2272.1.213.4.1.6
rcIpsecOspf6VirtualLinkPolicySrcAddressType This object specifies the type of address field in thercIpsecOspf6VirtualLinkSrcAddress. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.213.4.1.7
rcIpsecOspf6VirtualLinkPolicySrcAddress The source interface address to which the policy is added.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.213.4.1.8
rcIpsecOspf6VirtualLinkPolicyDstAddressType This object specifies the type of address field in thercIpsecOspf6VirtualLinkDstAddress. Only IPv6 address types are supported for this release.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.213.4.1.9
rcIpsecOspf6VirtualLinkPolicyDstAddress The destination interface address to which the policy is added.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.213.4.1.10
rcIpsecOspf6VirtualLinkPolicyLinkID This object contains unique id for an ospf virtual link.	Integer32 Enumerated Values: 1 network 2 access	.1.3.6.1.4.1.2272.1.213.4.1.11
rcIpsecOspf6VirtualLinkPolicyIfIndex The interface If index to which Ospf virtual link the policy is added.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.213.4.1.12
rcIpsecOspf6VirtualLinkPolicyOperStatus Operation status of the link, up or down.	Enumeration	.1.3.6.1.4.1.2272.1.213.4.1.13
rcIpsecOspf6VirtualLinkPolicyRowStatus Used to create/delete entries in the rcIpsecOspf6VirtualLinkPolicyTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.213.4.1.14

rcIpsecPolicySALinkTable

table

.1.3.6.1.4.1.2272.1.213.5 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecPolicySALinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecPolicySALinkTable'

Copy

This table is used to store the policy and 
security association details while linking 
the policy to a SA. This table contains the                               
policy name, and the SA name to which the
policy is linked.

rcIpsecPolicySALinkEntry row .1.3.6.1.4.1.2272.1.213.5.1

A Policy interface link table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecPolicySALinkPolicyName This object contains name of the Ipsec policy.	OctetString	.1.3.6.1.4.1.2272.1.213.5.1.1
rcIpsecPolicySALinkSAName This object contains name of the Security Association.	OctetString Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.213.5.1.2
rcIpsecPolicySALinkRowStatus Used to create/delete entries in the rcIpsecPolicySALinkTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.213.5.1.3

rcIpsecStatisticsTable

table

.1.3.6.1.4.1.2272.1.213.6 · 1 row entry · 40 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcIpsecStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcIpsecStatisticsTable'

Copy

This contains the IPSec statistics / counter
values on the switch level for all the IPSec
enabled interfaces.

rcIpsecStatisticsEntry row .1.3.6.1.4.1.2272.1.213.6.1

An Ipsec stats table entry.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpsecStatisticsIfIndex Interface If index for which the statistics is captured for this interface.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.213.6.1.1
rcIpsecStatisticsInSuccesses The total number of ingress packets successfully carried on IPSec for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.2
rcIpsecStatisticsInSPViolations The total number of ingress packets discarded by IPSec if security policy violation since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.3
rcIpsecStatisticsInNotEnoughMemories The total number of inbound packets discarded by IPSec if not enough memory available since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.4
rcIpsecStatisticsInAHESPReplays The total number of inbound packets discarded by IPSec if AH replay check failed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.5
rcIpsecStatisticsInESPReplays The total number of inbound packets discarded by IPSec if ESP replay check failed since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 include 2 exclude Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.6
rcIpsecStatisticsInAHFailures The total number of inbound packets discarded by IPSec if AH authentication check failed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.7
rcIpsecStatisticsInESPFailures The total number of inbound packets discarded by IPSec if ESP authentication check failed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.8
rcIpsecStatisticsOutSuccesses The total number of outbound packets successfully carried on IPSec since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.9
rcIpsecStatisticsOutSPViolations The total number of outbound packets discarded by IPSec if security policy violation since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.10
rcIpsecStatisticsOutNotEnoughMemories The total number of outbound packets discarded by IPSec if not enough memory available since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.11
rcIpsecStatisticsgeneralError The total number of general occurs since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.12
rcIpsecStatisticsInAHSuccesses The total number of inbound packets carried by IPSec if AH authentication succeeded since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 none 2 flushEntry 3 flushGrp Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.13
rcIpsecStatisticsOutAHSuccesses The total number of outbound packets carried by IPSec if AH authentication succeeded since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.14
rcIpsecStatisticsInESPSuccesses The total number of inbound packets carried by IPSec if ESP authentication succeeded since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.15
rcIpsecStatisticsOutESPSuccesses The total number of outbound packets carried by IPSec if ESP authentication succeeded since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.16
rcIpsecStatisticsOutKBytes The total number of outbound packets greater than 1 KB for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.17
rcIpsecStatisticsOutBytes The total number of outbound byte sized packets for this interface	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.18
rcIpsecStatisticsInKBytes The total number of inbound packets greater than 1 KB for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.19
rcIpsecStatisticsInBytes The total number of inbound byte sized packets for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.20
rcIpsecStatisticsTotalPacketsProcessed The total number of packets processed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.21
rcIpsecStatisticsTotalPacketsByPassed The total number of packets bypassed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.22
rcIpsecStatisticsOutAHFailures The total number of outbound packets discarded by IPSec if AH authentication check failed since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 other 2 pimSparseMode 3 pimSsmMode 4 mldOnly Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.23
rcIpsecStatisticsOutESPFailures The total number of outbound packets discarded by IPSec if ESP authentication check failed since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.24
rcIpsecStatisticsInMD5Hmacs The total number of inbound HMAC MD5 occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.25
rcIpsecStatisticsInSHA1Hmacs The total number of inbound HMAC SHA1 occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.26
rcIpsecStatisticsInAESXCBCs The total number of inbound AES XCBC MAC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.27
rcIpsecStatisticsInAnyNullAuth Total number of inbound packets without any Authentication algorithm for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.28
rcIpsecStatisticsIn3DESCBCs The total number of inbound Triple DES CBC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.29
rcIpsecStatisticsInAESCBCs The total number of inbound AES CBC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.30
rcIpsecStatisticsInAESCTRs The total number of outbound DES CBC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 pruned 2 forwarding Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.31
rcIpsecStatisticsInAnyNullEncrypt Total number of inbound packets without any Encryption algorithm for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.32
rcIpsecStatisticsOutMD5Hmacs The total number of outbound HMAC MD5 occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.33
rcIpsecStatisticsOutSHA1Hmacs The total number of outbound HMAC SHA1 occurrences since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 other 2 pimSparseMode 3 pimSsmMode 4 mldOnly Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.34
rcIpsecStatisticsOutAESXCBCs The total number of outbound AES XCBC MAC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.35
rcIpsecStatisticsOutInAnyNullAuth Total number of packets without any Authentication algorithm for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.36
rcIpsecStatisticsOut3DESCBCs The total number of outbound Triple DES CBC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.37
rcIpsecStatisticsOutAESCBCs The total number of outbound AES CBC occurrences since boot time for this interface.	SNMPv2-SMICounter64 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.213.6.1.38
rcIpsecStatisticsOutAESCTRs The total number of outbound DES CBC occurrence since boot time for this interface.	SNMPv2-SMICounter64 Enumerated Values: 1 other 2 pimSparseMode 3 pimSsmMode 4 mldOnly Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.39
rcIpsecStatisticsOutInAnyNullEncrypt Total number of packets without any Encryption algorithm for this interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.213.6.1.40

rcASGGlobalAccountsTable

table

.1.3.6.1.4.1.2272.1.214.1.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcASGGlobalAccountsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcASGGlobalAccountsTable'

Copy

Display ASG supported service login usernames and their permission levels

rcASGGlobalAccountsEntry row .1.3.6.1.4.1.2272.1.214.1.2.1

Contains an entry of rcASGGlobalAccountsEntry which has username and persmission levels

Indexes

No indexes recorded

Column	Syntax	OID
rcASGGlobalAccountsUsername ASG supported username	OctetString	.1.3.6.1.4.1.2272.1.214.1.2.1.1
rcASGGlobalAccountsAccessLevel permission level of the username	Enumeration	.1.3.6.1.4.1.2272.1.214.1.2.1.2

rcMldNewGroupTable

table

.1.3.6.1.4.1.2272.1.215.1.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldNewGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldNewGroupTable'

Copy

The (conceptual) table listing the multicast
groups configured in the device.

rcMldNewGroupEntry row .1.3.6.1.4.1.2272.1.215.1.1.1

An entry (conceptual row) representing an
Mld group.

Indexes

No indexes recorded

Column	Syntax	OID
rcMldNewGroupIpv6Address Multicast Group Address that others want to join to. A group address can be the same for many incoming ports.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.1.1.1
rcMldNewGroupMembers IP Address of a source that has sent group report wishing to join this group.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.1.1.2
rcMldNewGroupInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.1.1.3
rcMldNewGroupExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.1.1.4
rcMldNewGroupIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.1.1.5

rcMldInterfaceExtnTable

table

.1.3.6.1.4.1.2272.1.215.1.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldInterfaceExtnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldInterfaceExtnTable'

Copy

rcMldInterfaceExtnEntry row .1.3.6.1.4.1.2272.1.215.1.2.1

Indexes

No indexes recorded

Column	Syntax	OID
rcMldInterfaceExtnIfIndex An unique value to identify a physical interface or a logical interface (VLAN)	InterfaceIndex Constraints: range: 0-18724	.1.3.6.1.4.1.2272.1.215.1.2.1.1
rcMldInterfaceExtnSnoopEnable Enable snoop on interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.215.1.2.1.2
rcMldInterfaceExtnFlushAction MLD flush action	Enumerationr/w Constraints: range: 1-18724	.1.3.6.1.4.1.2272.1.215.1.2.1.16
rcMldInterfaceExtnSsmEnable Enable SSM.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.215.1.2.1.18
rcMldInterfaceExtnNewQuerier The address of the new MLD querier.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.2.1.25
rcMldInterfaceExtnDynamicDowngradeEnable enable dynamic downgrade the MLD version when older version query message was received.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.215.1.2.1.30
rcMldInterfaceExtnOperVersion The operational version of MLD which is running on this interface.	Enumeration	.1.3.6.1.4.1.2272.1.215.1.2.1.32
rcMldInterfaceExtnMcastMode MLD interface mode.	Enumeration	.1.3.6.1.4.1.2272.1.215.1.2.1.34

rcMldSnoopTraceTable

table

.1.3.6.1.4.1.2272.1.215.1.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldSnoopTraceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldSnoopTraceTable'

Copy

The table listing the multicast groups
traversing the snoop enabled router

rcMldSnoopTraceEntry row .1.3.6.1.4.1.2272.1.215.1.4.1

The entry listing the multicast groups
traversing the snoop enabled router

Indexes

No indexes recorded

Column	Syntax	OID
rcMldSnoopGrpAddr Ip multicast address of group traversing the router	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.4.1.1
rcMldSnoopSrcAddr Ip source address of the multicast group address	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.4.1.2
rcMldSnoopOutVlan Egress vlan id for the multicast group	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.4.1.3
rcMldSnoopInPort Ingress port for the multicast group	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.4.1.4
rcMldSnoopInVlan Ingress vlan id for the multicast source	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.4.1.5
rcMldSnoopOutPort Egress port of the multicast group	PortSet Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.215.1.4.1.6
rcMldSnoopType The port type on which the snoop entry is learnt	Enumeration	.1.3.6.1.4.1.2272.1.215.1.4.1.7

rcMldv2CacheTable

table

.1.3.6.1.4.1.2272.1.215.1.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldv2CacheTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldv2CacheTable'

Copy

The (conceptual) table listing the MLDv2 specific data
corresponding to each interface, port  and multicast group pair on
a Router.

rcMldv2CacheEntry row .1.3.6.1.4.1.2272.1.215.1.5.1

An entry (conceptual row) representing an Mldv2 Group.

Indexes

rcPimIpv6NbrSecAddressIfIndex rcPimIpv6NbrSecAddressType rcPimIpv6NbrSecAddressPrimary rcPimIpv6NbrSecAddress

Column	Syntax	OID
rcMldv2CacheEntryGroupAddress Multicast group Address that others want to join. A group address can be the same for many incoming ports.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.5.1.1
rcMldv2CacheEntryIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.5.1.2
rcMldv2CacheEntryInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	InterfaceIndex Constraints: range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.215.1.5.1.3
rcMldv2CacheEntryVersion1HostTimer The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface. This entry only applies to MLDv1 hosts. Upon hearing any MLDv1 Repor…	SNMPv2-SMIInteger32 Constraints: range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.215.1.5.1.5
rcMldv2CacheEntrySourceFilterMode The current group state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration	.1.3.6.1.4.1.2272.1.215.1.5.1.6

rcMldRouterSrcListTable

table

.1.3.6.1.4.1.2272.1.215.1.6 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldRouterSrcListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldRouterSrcListTable'

Copy

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair on
a Router.

rcMldRouterSrcListEntry row .1.3.6.1.4.1.2272.1.215.1.6.1

An entry (conceptual row) representing an
Mld Source.

Indexes

No indexes recorded

Column	Syntax	OID
rcMldRouterSrcListGroupAddress The IPv6 multicast group address for which this entry contains information.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.6.1.1
rcMldRouterSrcListIfIndex The interface for which this entry contains information for an IP multicast group address.	InterfaceIndex Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.215.1.6.1.2
rcMldRouterSrcListInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.6.1.3
rcMldRouterSrcListHostAddress The host address to which this entry corresponds.	IPV6-TCIpv6Address Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.215.1.6.1.4
rcMldRouterSrcListMemberAddress IPv6 Address of a member that has sent source specific report wishing to join this source.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.6.1.5
rcMldRouterSrcListExpire This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.6.1.6
rcMldRouterSrcListMode The current member state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.215.1.6.1.7
rcMldRouterSrcListMemberExpire This value indicates the time until the member for this source will expire	SNMPv2-SMIInteger32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.215.1.6.1.8

rcMldSenderTable

table

.1.3.6.1.4.1.2272.1.215.1.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMldSenderTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMldSenderTable'

Copy

The (conceptual) table listing the multicast
senders.

rcMldSenderEntry row .1.3.6.1.4.1.2272.1.215.1.7.1

An entry (conceptual row) representing an
MLD senser.

Indexes

No indexes recorded

Column	Syntax	OID
rcMldSenderGrpAddr IPv6 multicast group address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.7.1.1
rcMldSenderIfIndex Interface index of the sender.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.215.1.7.1.2
rcMldSenderMemberAddr Ipv6 Host Address.	IPV6-TCIpv6Address Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.215.1.7.1.3
rcMldSenderAction none(1), flushEntry(2), flushGrp(3).	Enumerationr/w Constraints: range: 1-500	.1.3.6.1.4.1.2272.1.215.1.7.1.4
rcMldSenderPort Mld Sender port.	InterfaceIndex Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.215.1.7.1.5

rcMRouteIpv6Table

table

.1.3.6.1.4.1.2272.1.216.1.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteIpv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteIpv6Table'

Copy

The (conceptual) table containing multicast routing
information for IPv6 datagrams sent by particular sources to
the IPv6 multicast groups known to this router.

rcMRouteIpv6Entry row .1.3.6.1.4.1.2272.1.216.1.1.1

An entry (conceptual row) containing the multicast routing
information for IPv6 datagrams from a particular source and
addressed to a particular IPv6 multicast group address.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteIpv6Group The IPv6 multicast group address for which this entry contains multicast routing information.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.1.1.1
rcMRouteIpv6Source The network address which when combined with the corresponding value of rcMRouteIpv6SourceMask identifies the sources for which this entry contains multicast routing information.	IPV6-TCIpv6Address Constraints: range: 1-500	.1.3.6.1.4.1.2272.1.216.1.1.1.2
rcMRouteIpv6SourceMask The network mask which when combined with the corresponding value of rcMRouteIpv6Source identifies the sources for which this entry contains multicast routing information.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.1.1.3
rcMRouteIpv6UpstreamNeighbor The address of the upstream neighbor (e.g., RPF neighbor) from which IPv6 datagrams from these sources to this multicast address are received.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.1.1.4
rcMRouteIpv6InIfIndex The value of ifIndex for the interface on which IPv6 datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may…	SNMPv2-SMIInteger32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.216.1.1.1.5
rcMRouteIpv6ExpiryTime The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.216.1.1.1.7
rcMRouteIpv6Protocol The routing mechanism via which this route was learned.	Enumeration	.1.3.6.1.4.1.2272.1.216.1.1.1.11

rcMRouteIpv6NextHopTable

table

.1.3.6.1.4.1.2272.1.216.1.2 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteIpv6NextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteIpv6NextHopTable'

Copy

The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IPv6 multicast
datagrams.  Each entry is one of a list of next hops on
outgoing interfaces for particular sources sending to a
particular multicast group address.

rcMRouteIpv6NextHopEntry row .1.3.6.1.4.1.2272.1.216.1.2.1

An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IPv6 multicast datagrams from
particular sources to a IPv6 multicast group address are
routed.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteIpv6NextHopGroup The IPv6 multicast group for which this entry specifies a next hop on an outgoing interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.2.1.1
rcMRouteIpv6NextHopSource The network address which when combined with the corresponding value of rcMRouteIpv6NextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.	IPV6-TCIpv6Address Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.216.1.2.1.2
rcMRouteIpv6NextHopSourceMask The network mask which when combined with the corresponding value of rcMRouteIpv6NextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.2.1.3
rcMRouteIpv6NextHopIfIndex The ifIndex value of the interface for the outgoing interface for this next hop.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.216.1.2.1.4
rcMRouteIpv6NextHopAddress The address of the next hop specific to this entry. For most interfaces, this is identical to rcMRouteIpv6NextHopGroup. NBMA interfaces, however, may have multiple next hop addresses out a single outgoing interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.1.2.1.5
rcMRouteIpv6NextHopState An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IPv6 datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' …	Enumeration	.1.3.6.1.4.1.2272.1.216.1.2.1.6
rcMRouteIpv6NextHopExpiryTime The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.216.1.2.1.8
rcMRouteIpv6NextHopClosestMemberHops The minimum number of hops between this router and any member of this IPv6 multicast group reached via this next hop on this outgoing interface. Any IPv6 multicast datagrams for the group which have a TTL less than thi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.216.1.2.1.9
rcMRouteIpv6NextHopProtocol The routing mechanism via which this next-hop was learned.	Enumeration Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.216.1.2.1.10

rcMRouteIpv6InterfaceTable

table

.1.3.6.1.4.1.2272.1.216.1.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteIpv6InterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteIpv6InterfaceTable'

Copy

The (conceptual) table containg multicast routing
information specific to interfaces.

rcMRouteIpv6InterfaceEntry row .1.3.6.1.4.1.2272.1.216.1.3.1

An entry (conceptual row) containing the multicast routing
information for a particular interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteIpv6InterfaceIfIndex The ifIndex value of the interface for which this entry contains information.	SNMPv2-SMIInteger32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.216.1.3.1.1
rcMRouteIpv6InterfaceTtl The datagram TTL threshold for the interface. Any IPv6 multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded ou…	Integer32	.1.3.6.1.4.1.2272.1.216.1.3.1.2
rcMRouteIpv6InterfaceProtocol The routing protocol running on this interface.	Enumeration Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.216.1.3.1.3

rcMRouteIpv6StatsTable

table

.1.3.6.1.4.1.2272.1.216.2.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcMRouteIpv6StatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcMRouteIpv6StatsTable'

Copy

the table containing IPv6 Multicast statistics.

rcMRouteIpv6StatsEntry row .1.3.6.1.4.1.2272.1.216.2.3.1

An entry containing the ipv6 multicast statistics
information for the specific group ipv6 address.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteIpv6StatsGroupAddress the IPv6 multicast group address for which this entry contains ipv6 multicast statistics.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.216.2.3.1.1
rcMRouteIpv6StatsSourceCount The number of sources corresponding to the specific group and vrf.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.216.2.3.1.2
rcMRouteIpv6StatsPkts The total number of frames that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.216.2.3.1.3
rcMRouteIpv6StatsBytes The total number of bytes that are processed corresponding to the specific group and vrf.	SNMPv2-SMICounter64 Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.216.2.3.1.4
rcMRouteIpv6StatsAverageSizePerPkt The average length of packets that are processed corresponding to the specific group and vrf.	SNMPv2-SMIInteger32 Constraints: range: 7-7	.1.3.6.1.4.1.2272.1.216.2.3.1.5

rcPimIpv6InterfaceTable

table

.1.3.6.1.4.1.2272.1.217.1.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPimIpv6InterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPimIpv6InterfaceTable'

Copy

The (conceptual) table listing the router's PIM IPv6 interfaces.
IGMP and PIM are enabled on all IPv6 interfaces listed in this
table.

rcPimIpv6InterfaceEntry row .1.3.6.1.4.1.2272.1.217.1.2.1

An entry (conceptual row) in the rcPimIpv6InterfaceTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcPimIpv6InterfaceIfIndex The ifIndex value of this PIM interface.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.217.1.2.1.1
rcPimIpv6InterfaceAddress The IPv6 address of the PIM interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.2.1.2
rcPimIpv6InterfaceNetMask The network mask for the IPv6 address of the PIM interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.2.1.3
rcPimIpv6InterfaceMode The configured mode of this PIM interface.	Enumeration	.1.3.6.1.4.1.2272.1.217.1.2.1.4
rcPimIpv6InterfaceDR The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value ::.	IPV6-TCIpv6Address Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.217.1.2.1.5
rcPimIpv6InterfaceHelloInterval The frequency at which PIM Hello messages are transmitted on this interface.	secondsUnsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.217.1.2.1.6
rcPimIpv6InterfaceRowStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.217.1.2.1.7
rcPimIpv6InterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the rcPimIpv6JoinPruneInterval.	secondsUnsigned32r/w	.1.3.6.1.4.1.2272.1.217.1.2.1.8

rcPimIpv6NeighborTable

table

.1.3.6.1.4.1.2272.1.217.1.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPimIpv6NeighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPimIpv6NeighborTable'

Copy

The (conceptual) table listing the router's PIM IPv6 neighbors.

rcPimIpv6NeighborEntry row .1.3.6.1.4.1.2272.1.217.1.3.1

An entry (conceptual row) in the rcPimIpv6NeighborTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcPimIpv6NeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.217.1.3.1.1
rcPimIpv6NeighborAddress The IPv6 address of the PIM neighbor for which this entry contains information.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.3.1.2
rcPimIpv6NeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Enumerated Values: 1 disable 2 enable 3 notApplicable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.217.1.3.1.3
rcPimIpv6NeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out.	SNMPv2-SMITimeTicks Enumerated Values: 1 v1 2 v2 3 v3 4 notApplicable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.217.1.3.1.4

rcPimIpv6RPSetTable

table

.1.3.6.1.4.1.2272.1.217.1.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPimIpv6RPSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPimIpv6RPSetTable'

Copy

The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IPv6 multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.

rcPimIpv6RPSetEntry row .1.3.6.1.4.1.2272.1.217.1.4.1

An entry (conceptual row) in the rcPimIpv6RPSetTable.

Indexes

rcDvrHostEntriesIpAddrType rcDvrHostEntriesIpAddr rcDvrHostEntriesMask rcDvrHostEntriesL3Isid

Column	Syntax	OID
rcPimIpv6RPSetComponent A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.217.1.4.1.1
rcPimIpv6RPSetGroupAddress The IPv6 multicast group address which, when combined with rcPimIpv6RPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.4.1.2
rcPimIpv6RPSetGroupMask The multicast group address mask which, when combined with rcPimIpv6RPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.4.1.3
rcPimIpv6RPSetAddress The IPv6 address of the Candidate-RP.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.217.1.4.1.4
rcPimIpv6RPSetHoldTime The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.	secondsUnsigned32	.1.3.6.1.4.1.2272.1.217.1.4.1.5
rcPimIpv6RPSetExpiryTime The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.217.1.4.1.6

rcPimIpv6NbrSecAddressTable

table

.1.3.6.1.4.1.2272.1.217.1.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcPimIpv6NbrSecAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcPimIpv6NbrSecAddressTable'

Copy

The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the rcPimIpv6NeighborTable defined).

rcPimIpv6NbrSecAddressEntry row .1.3.6.1.4.1.2272.1.217.1.7.1

An entry (conceptual row) in the rcPimIpv6NbrSecAddressTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcPimIpv6NbrSecAddressIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	InterfaceIndex Enumerated Values: 1 local 2 dynamic 3 subnet 4 ecmp 5 bb-loc 6 bb-non-loc 7 default 8 redist Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.217.1.7.1.1
rcPimIpv6NbrSecAddressType The address type of this PIM neighbor.	INET-ADDRESS-MIBInetAddressType Constraints: range: 1-255 Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.217.1.7.1.2
rcPimIpv6NbrSecAddressPrimary The primary IP address of this PIM neighbor. The InetAddressType is given by the rcPimIpv6NbrSecAddressType object.	OctetString	.1.3.6.1.4.1.2272.1.217.1.7.1.3
rcPimIpv6NbrSecAddress The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object.	OctetString	.1.3.6.1.4.1.2272.1.217.1.7.1.4

rcVxlanVtepTable

table

.1.3.6.1.4.1.2272.1.218.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVxlanVtepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVxlanVtepTable'

Copy

The table for vxlan tunnel end point.

rcVxlanVtepEntry row .1.3.6.1.4.1.2272.1.218.3.1

Entry contains the configuration information about the vxlan tunnel end point

Indexes

No indexes recorded

Column	Syntax	OID
rcVxlanVtepId An index used to uniquely identify this vxlan tunnel end point.	Integer32	.1.3.6.1.4.1.2272.1.218.3.1.1
rcVxlanVtepIpAddr A value that uniquely identifies the destination IP address of vtep tunnel	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.218.3.1.2
rcVxlanVtepName An administratively-assigned name for this vxlan tunnel end point. By default name will be VTEP-<#ID>-<IP address>	OctetStringr/w	.1.3.6.1.4.1.2272.1.218.3.1.3
rcVxlanVtepRowStatus Used to create/delete vxlan tunnel end point	SNMPv2-TCRowStatusr/w Constraints: range: 0-64 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.218.3.1.4
rcVxlanVtepNextHopVrfName Next hop vrf name to reach remote vtep	OctetString	.1.3.6.1.4.1.2272.1.218.3.1.5

rcVxlanVnidTable

table

.1.3.6.1.4.1.2272.1.218.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVxlanVnidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVxlanVnidTable'

Copy

A Vxlan vnid table.

rcVxlanVnidEntry row .1.3.6.1.4.1.2272.1.218.4.1

Entry containing vnid and i-sid information for a
particular vxlan tunnel end point.

Indexes

rcDvrDatabaseDestIpAddrType rcDvrDatabaseDestIpAddr rcDvrDatabaseDestMask rcDvrDatabaseL3Isid rcDvrDatabaseEcmpIndex

Column	Syntax	OID
rcVxlanVnidIdentifier A value that uniquely identifies the vnid of this vxlan tunnel end point.	Integer32	.1.3.6.1.4.1.2272.1.218.4.1.1
rcVxlanVnidIsid A value that uniquely identifies the i-sid of this Vxlan end point.	Integer32r/w	.1.3.6.1.4.1.2272.1.218.4.1.2
rcVxlanVnidRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.218.4.1.3
rcVxlanVnidAction Vnid related actions.	Enumerationr/w	.1.3.6.1.4.1.2272.1.218.4.1.4

rcVxlanVnidEndPointTable

table

.1.3.6.1.4.1.2272.1.218.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVxlanVnidEndPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVxlanVnidEndPointTable'

Copy

Attributes of vnid table at vxlan tunnel end point.

rcVxlanVnidEndPointEntry row .1.3.6.1.4.1.2272.1.218.5.1

Entry containing configuration information for a
particular vnid at vxlan tunnel end point.

Indexes

No indexes recorded

Column	Syntax	OID
rcVxlanVnidEndPointVnid A value that uniquely identifies the vnid of this vxlan tunnel end point.	Integer32	.1.3.6.1.4.1.2272.1.218.5.1.1
rcVxlanVnidEndPointVtepId vxlan tunnel end point id associated with given vnid	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.218.5.1.2
rcVxlanVnidEndPointIsid A value that uniquely identifies the i-sid of this vxlan tunnel end point.	Integer32	.1.3.6.1.4.1.2272.1.218.5.1.3
rcVxlanVnidEndPointRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.218.5.1.4

rcVxlanVtepNextHopTable

table

.1.3.6.1.4.1.2272.1.218.6 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVxlanVtepNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVxlanVtepNextHopTable'

Copy

The table to store nexthop information for the remote vtep

rcVxlanVtepNextHopEntry row .1.3.6.1.4.1.2272.1.218.6.1

Entry contains the nexthop information for the remote vtep

Indexes

No indexes recorded

Column	Syntax	OID
rcVxlanVtepNextHopVtepId An index used to uniquely identify the remote vtep.This value is same as the vtep identifier in the rcVxlanVtepTable	Integer32	.1.3.6.1.4.1.2272.1.218.6.1.1
rcVxlanVtepNextHopIp An index that uniquely identifies the next hop IP address of the remote vtep	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.218.6.1.2
rcVxlanVtepNextHopIfIndex Next hop destination ifindex to reach the remote vtep	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.218.6.1.3
rcVxlanVtepNextHopVid Next hop vlan id to reach the remote vtep	Integer32	.1.3.6.1.4.1.2272.1.218.6.1.4

rcVxlanVnidElanEndPointTable

table

.1.3.6.1.4.1.2272.1.218.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcVxlanVnidElanEndPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcVxlanVnidElanEndPointTable'

Copy

A list of elan end point entries.

rcVxlanVnidElanEndPointEntry row .1.3.6.1.4.1.2272.1.218.7.1

Entry containing configuration information for a
particular elan end point.

Indexes

No indexes recorded

Column	Syntax	OID
rcVxlanVnidElanEndPointVnid A value that uniquely identifies the vnid of this elan end point.	Integer32	.1.3.6.1.4.1.2272.1.218.7.1.1
rcVxlanVnidElanEndPointCvid A value that uniquely identifies the customer vid of this elan end point. 4095 is not used. 4096 is reserved for untagged case	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.218.7.1.2
rcVxlanVnidElanEndPointIfIndex The interface index for mlt or port of this elan end point.	InterfaceIndex Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.218.7.1.3
rcVxlanVnidElanEndPointIsid A i-sid value associated with vnid	Integer32	.1.3.6.1.4.1.2272.1.218.7.1.4
rcVxlanVnidElanEndPointRowStatus Row status for create/delete elan end point under vnid	SNMPv2-TCRowStatusr/w Constraints: range: 1-255 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.218.7.1.5

rcDvrRouteTable

table

.1.3.6.1.4.1.2272.1.219.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrRouteTable'

Copy

Table of DVR routes that are in the CP DVR Table. This table 
contains network routes only (all non /32 routes).

rcDvrRouteEntry row .1.3.6.1.4.1.2272.1.219.2.1

An entry of rcDvrRoute Table. An entry exists for
each network route in a DVR domain.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrRouteDestIpAddrType Dest Ip address type of the DVR route table entry. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.2.1.1
rcDvrRouteDestIpAddr Dest Ip address of the DVR route table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrRouteDestIpAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.2.1.2
rcDvrRouteDestMask Dest mask of the DVR route table entry.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.219.2.1.3
rcDvrRouteL3Isid L3 I-sid of the DVR route table entry.	Integer32	.1.3.6.1.4.1.2272.1.219.2.1.4
rcDvrRouteEcmpIndex Ecmp Index for the Ecmp routes of the DVR route table entry.	Integer32 Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.219.2.1.5
rcDvrRouteNextHopMac Next hop BEB of the DVR route table entry.	SNMPv2-TCMacAddress Constraints: range: 7-7 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.2.1.6
rcDvrRouteL2Isid L2 I-sid of the DVR route table entry.	Integer32 Enumerated Values: 1 controller 2 non-dvr-beb	.1.3.6.1.4.1.2272.1.219.2.1.7
rcDvrRouteCost Cost of the DVR route table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.2.1.8
rcDvrRouteNextHopName Nexthop BEB's hostname of the DVR route table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.2.1.9
rcDvrRouteType Route type of the DVR route table entry.	Enumeration	.1.3.6.1.4.1.2272.1.219.2.1.10
rcDvrRouteVrfId VRF Id of the DVR route table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.2.1.11

rcDvrMembersTable

table

.1.3.6.1.4.1.2272.1.219.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrMembersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrMembersTable'

Copy

Table of DVR members in a DVR domain. It contains 
all Controllers and Leaf nodes.

rcDvrMembersEntry row .1.3.6.1.4.1.2272.1.219.3.1

An entry of rcDvrMembers Table. It contains
all Controller and Leaf nodes.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrMemberMacAddress Mac address of the DVR members table entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.3.1.1
rcDvrMemberSysId Sys-id of the DVR members table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.3.1.2
rcDvrMemberNickName Nick-name of the DVR members table entry.	OctetString Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.219.3.1.3
rcDvrMemberRole DVR role of the DVR members table entry.	Enumeration	.1.3.6.1.4.1.2272.1.219.3.1.4
rcDvrMemberDomainId DVR domain id of the DVR members table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.3.1.5

rcDvrInterfacesTable

table

.1.3.6.1.4.1.2272.1.219.4 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrInterfacesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrInterfacesTable'

Copy

Table of DVR Interfaces in a DVR domain. DVR 
interfaces are created when IP is configured on the DVR 
enabled L2VSN(vlan, i-sid).

rcDvrInterfacesEntry row .1.3.6.1.4.1.2272.1.219.4.1

An entry of rcDvrInterfaces Table. An entry exists
for each interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrInterfaceVlanIpAddrType Vlan Ip address type of the DVR interfaces table entry. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.4.1.1
rcDvrInterfaceVlanIpAddr Dest Ip address of the DVR interfaces table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrInterfaceVlanIpAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.4.1.2
rcDvrInterfaceL3Isid L3 I-sid of the DVR interfaces table entry.	Integer32	.1.3.6.1.4.1.2272.1.219.4.1.3
rcDvrInterfaceL2Isid L2 I-sid of the DVR interfaces table entry.	Integer32	.1.3.6.1.4.1.2272.1.219.4.1.4
rcDvrInterfaceVlanIpMask Vlan Ip address mask of the DVR interfaces table entry.	INET-ADDRESS-MIBInetAddressPrefixLength Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.219.4.1.5
rcDvrInterfaceVrfId VRF Id of the DVR interfaces table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.4.1.6
rcDvrInterfaceVlanId Vlan Id of the DVR interfaces table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.4.1.7
rcDvrInterfaceGwIpAddrType The address type of the DVR Gateway IP address. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.4.1.8
rcDvrInterfaceGwIpAddr DVR Gateway IP address of the DVR interfaces table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrInterfaceGwIpAddrType.	INET-ADDRESS-MIBInetAddress Enumerated Values: 1 lldp 2 cdp Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.4.1.9
rcDvrInterfaceAdminState Admin state of the DVR interfaces table entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.219.4.1.10
rcDvrInterfaceSpbmcState SPBMC state of the DVR interfaces table entry.	Enumeration	.1.3.6.1.4.1.2272.1.219.4.1.11
rcDvrInterfaceIgmpVersion The version of IGMP which is running on this DVR interface.	Enumeration	.1.3.6.1.4.1.2272.1.219.4.1.12

rcDvrHostEntriesTable

table

.1.3.6.1.4.1.2272.1.219.5 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrHostEntriesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrHostEntriesTable'

Copy

Table of DVR host entries in a DVR domain.

rcDvrHostEntriesEntry row .1.3.6.1.4.1.2272.1.219.5.1

An entry of rcDvrHostEntries Table. A entry exists for
each /32 host route in DVR domain.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrHostEntriesIpAddrType IP address type of the DVR host-entries table entry. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.5.1.1
rcDvrHostEntriesIpAddr IP address of the DVR host-entries table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrHostEntriesIpAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.5.1.2
rcDvrHostEntriesMask Mask of the DVR host-entries table entry.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.219.5.1.3
rcDvrHostEntriesL3Isid L3 I-sid of the DVR host-entries table entry.	SNMPv2-SMIInteger32 Enumerated Values: 1 rsa Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.5.1.4
rcDvrHostEntriesMacAddr Mac address of the DVR host-entries table entry.	SNMPv2-TCMacAddress Constraints: range: 2048-2048 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.5.1.5
rcDvrHostEntriesL2Isid L2 I-sid of the DVR host-entries table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-46	.1.3.6.1.4.1.2272.1.219.5.1.6
rcDvrHostEntriesPort Port of the DVR host-entries table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.5.1.7
rcDvrHostEntriesDomainId Domain Id of the DVR host-entries table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.5.1.8
rcDvrHostEntriesType Host entry type of the DVR host-entries table entry.	Enumeration	.1.3.6.1.4.1.2272.1.219.5.1.9
rcDvrHostEntriesNextHopName Next hop of the DVR host-entries table entry.	OctetString Constraints: range: 1-45	.1.3.6.1.4.1.2272.1.219.5.1.10
rcDvrHostEntriesNextHopMac Next hop as mac of the DVR host-entries table entry.	SNMPv2-TCMacAddress Constraints: range: 0-64 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.5.1.11
rcDvrHostEntriesClear True to clear the entry. Always returns false.	SNMPv2-TCTruthValuer/w Constraints: range: 0-45 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.219.5.1.12
rcDvrHostEntriesVrfId VRF Id of the DVR host-entries table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.219.5.1.13

rcDvrL3vsnTable

table

.1.3.6.1.4.1.2272.1.219.6 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrL3vsnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrL3vsnTable'

Copy

Table of DVR L3VSN in a DVR domain. On DVR Controller, it has
all configured vrfIds/vrf names. On DVR Leaf, it only has 
internal created vrfIds/vrf names.

rcDvrL3vsnEntry row .1.3.6.1.4.1.2272.1.219.6.1

An entry of rcDvrL3vsn Table. An entry exists for each
vrfId.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrL3vsnVrfId L3VSN VrfId of the DVR L3VSN table entry.	SNMPv2-SMIInteger32 Enumerated Values: 1 none 2 success 3 failed 4 inProgress Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.6.1.1
rcDvrL3vsnIsid L3VSN I-sid of the DVR L3VSN table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-81	.1.3.6.1.4.1.2272.1.219.6.1.2
rcDvrL3vsnVrfName L3VSN vrf name of the DVR L3VSN table entry.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.2272.1.219.6.1.3
rcDvrL3vsnInjectDefaultRouteDisable l3VSN inject-default-route-disable of the DVR L3VSN table entry. This is used when the user wants to disable the default feature of injecting the default route (0.0.0.0/0.0.0.0) into the DVR domain for a specific L3VSN…	SNMPv2-TCTruthValuer/w Constraints: range: 7-1185 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.219.6.1.4

rcDvrDatabaseTable

table

.1.3.6.1.4.1.2272.1.219.7 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrDatabaseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrDatabaseTable'

Copy

Table of DVR database that are in the CP DVR Table. This table
contains all network and host routes

rcDvrDatabaseEntry row .1.3.6.1.4.1.2272.1.219.7.1

An entry of rcDvrDatabase Table. An entry exists for
each network or host route in a DVR domain.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrDatabaseDestIpAddrType Dest Ip address type of the DVR database table entry. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.7.1.1
rcDvrDatabaseDestIpAddr Dest Ip address of the DVR database table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrDatabaseDestIpAddrType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.7.1.2
rcDvrDatabaseDestMask Dest mask of the DVR database table entry.	INET-ADDRESS-MIBInetAddressPrefixLength Enumerated Values: 1 onlineCaCert 2 onlineSubjectCert 3 offlineCaCert 4 offlineSubjectCert Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.219.7.1.3
rcDvrDatabaseL3Isid L3 I-sid of the DVR database table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.219.7.1.4
rcDvrDatabaseEcmpIndex Ecmp Index for the Ecmp routes of the DVR databasse table entry.	Integer32 Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.219.7.1.5
rcDvrDatabaseNextHop Next hop BEB of the DVR database table entry.	SNMPv2-TCMacAddress Constraints: range: 0-1000 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.7.1.6
rcDvrDatabaseL2Isid L2 I-sid of the DVR database table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.7.1.7
rcDvrDatabaseOutgoingInterface Outgoing interface (ports or mlt) of the DVR database table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.7.1.8
rcDvrDatabaseSpbCost Spb cost of the DVR database table entry.	SNMPv2-SMIInteger32 Enumerated Values: 1 rsaEncryption 2 md2withRSAEncryption 3 md4withRSAEncryption 4 md5withRSAEncryption 5 sha1withRSAEncryption 11 sha256withRSAEncryption 12 sha384withRSAEncryption 13 sha512withRSAEncryption 14 sha224withRSAEncryption Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.7.1.9
rcDvrDatabasePrefixCost Prefix cost of the DVR database table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-2049	.1.3.6.1.4.1.2272.1.219.7.1.10
rcDvrDatabaseNextHopName Nexthop BEB's hostname of the DVR database table entry.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.219.7.1.11
rcDvrDatabaseAge Age(uptime since created) of the DVR database table entry.	SNMPv2-SMITimeTicks Enumerated Values: 1 rsaEncryption 2 md2withRSAEncryption 3 md4withRSAEncryption 4 md5withRSAEncryption 5 sha1withRSAEncryption 11 sha256withRSAEncryption 12 sha384withRSAEncryption 13 sha512withRSAEncryption 14 sha224withRSAEncryption Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.219.7.1.12
rcDvrDatabaseVrfId VRF Id of the DVR database table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-2048	.1.3.6.1.4.1.2272.1.219.7.1.13

rcDvrBackboneEntriesTable

table

.1.3.6.1.4.1.2272.1.219.8 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrBackboneEntriesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrBackboneEntriesTable'

Copy

Table of DVR backbone entries in a DVR domain. 
Used for inter DVR route redistribution.

rcDvrBackboneEntriesEntry row .1.3.6.1.4.1.2272.1.219.8.1

An entry of rcDvrBackboneEntriesTable.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrBackboneEntriesIpAddrType IP address type of the DVR backbone-entries table entry. It can be either IPv4 or IPv6 for DVR feature.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.219.8.1.1
rcDvrBackboneEntriesIpAddr IP address of the DVR backbone-entries table entry. Support ipv4 size(4) and ipv6 size(16) depending on rcDvrBackboneEntriesIpAddrType.	INET-ADDRESS-MIBInetAddress Enumerated Values: 0 digitalSignature 1 nonRepudiation 2 keyEncipherment 3 dataEncipherment 4 keyAgreement 5 keyCertSign 6 cRLSign 7 encipherOnly 8 decipherOnly Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.219.8.1.2
rcDvrBackboneEntriesL3Isid L3 I-sid of the DVR backbone-entries table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-129	.1.3.6.1.4.1.2272.1.219.8.1.3
rcDvrBackboneEntriesDomainId Domain id of the DVR backbone-entries table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.219.8.1.4
rcDvrBackboneEntriesEcmpIndex Ecmp Index for the Ecmp routes of the DVR backbone-entries table entry.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.219.8.1.5
rcDvrBackboneEntriesHostMacAddr Host mac address of the DVR backbone-entries table entry.	SNMPv2-TCMacAddress Constraints: range: 0-1000 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.8.1.6
rcDvrBackboneEntriesL2Isid L2 I-sid of the DVR backbone-entries table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.219.8.1.7
rcDvrBackboneEntriesAdvControllerName Advertising controller of the DVR backbone-entries table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.8.1.8
rcDvrBackboneEntriesAdvController Advertising controller as mac of the DVR backbone-entries table entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.8.1.9
rcDvrBackboneEntriesNextHopName Next hop of the DVR backbone-entries table entry.	OctetString Enumerated Values: 1 caCert 2 rootCaCert	.1.3.6.1.4.1.2272.1.219.8.1.10
rcDvrBackboneEntriesNextHopMac Next hop as mac of the DVR backbone-entries table entry.	SNMPv2-TCMacAddress Constraints: range: 1-64 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.8.1.11

rcDvrBackboneMembersTable

table

.1.3.6.1.4.1.2272.1.219.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDvrBackboneMembersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDvrBackboneMembersTable'

Copy

Table of DVR backbone members in a DVR domain. It contains 
all Controllers and NON DVR BEBs.

rcDvrBackboneMembersEntry row .1.3.6.1.4.1.2272.1.219.9.1

An entry of rcDvrBackboneMembersTable. It contains
all Controllers and NON DVR BEBs.

Indexes

No indexes recorded

Column	Syntax	OID
rcDvrBackboneMemberMacAddress Mac address of the DVR backbone members table entry.	SNMPv2-TCMacAddress Constraints: range: 0-1000 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.219.9.1.1
rcDvrBackboneMemberSysId Sys-id of the DVR backbone members table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.9.1.2
rcDvrBackboneMemberNickName Nick-name of the DVR backbone members table entry.	OctetString	.1.3.6.1.4.1.2272.1.219.9.1.3
rcDvrBackboneMemberRole DVR role of the DVR backbone members table entry.	Enumeration Enumerated Values: 1 rsaEncryption 2 md2withRSAEncryption 3 md4withRSAEncryption 4 md5withRSAEncryption 5 sha1withRSAEncryption 11 sha256withRSAEncryption 12 sha384withRSAEncryption 13 sha512withRSAEncryption 14 sha224withRSAEncryption	.1.3.6.1.4.1.2272.1.219.9.1.4
rcDvrBackboneMemberDomainId DVR domain id of the DVR backbone members table entry.	SNMPv2-SMIInteger32 Constraints: range: 0-2049	.1.3.6.1.4.1.2272.1.219.9.1.5

rcLldpPortCdpConfigTable

table

.1.3.6.1.4.1.2272.1.220.1.2.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLldpPortCdpConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLldpPortCdpConfigTable'

Copy

The table contains the configuration of CDP
on the device's interfaces.

rcLldpPortCdpConfigEntry row .1.3.6.1.4.1.2272.1.220.1.2.1.1

An entry in the rcLldpPortCdpConfigTable,
containing the status of CDP on an interface.

Indexes

No indexes recorded

Column	Syntax	OID
rcLldpPortCdpConfigIfIndex The ifIndex value of the local interface. It is local port interface index	InterfaceIndex Constraints: range: 0-2048	.1.3.6.1.4.1.2272.1.220.1.2.1.1.1
rcLldpPortCdpConfigAdminState Admininstrattely state of the CDP message on the interface. the value of this object has no meaning if CDP compatible mode is globally disabled (rcLldpGlobalCdpCompatibleModeEnbale is set to false)	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.220.1.2.1.1.2

rcLldpPortCdpRemTable

table

.1.3.6.1.4.1.2272.1.220.1.2.2 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLldpPortCdpRemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLldpPortCdpRemTable'

Copy

The table contains the Remote device information
obtained via receiving CDP messages on
the local interface. Each rows is per physical network
connection known to this agent

rcLldpPortCdpRemEntry row .1.3.6.1.4.1.2272.1.220.1.2.2.1

An entry of the rcLldpPortCdpRemTable,
contains the information received via CDP on one
interface from one device. Entries is craeted when
CDP message is received from neighbor and it is
deleted when CDP is disbaled…

Indexes

No indexes recorded

Column	Syntax	OID
rcLldpPortCdpRemLocalPortNum The port interface index value used to identify the port component (contained in the local chassis with the LLDP/CDP agent) associated with this entry. The rcLldpPortCdpRemLocalPortNum identifies the port on which the …	InterfaceIndex Enumerated Values: 0 digitalSignature 1 nonRepudiation 2 keyEncipherment 3 dataEncipherment 4 keyAgreement 5 keyCertSign 6 cRLSign 7 encipherOnly 8 decipherOnly Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.220.1.2.2.1.1
rcLldpPortCdpRemIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: range: 0-129	.1.3.6.1.4.1.2272.1.220.1.2.2.1.2
rcLldpPortCdpRemAddressType The type of address identifier encoding used in the associated 'rcLldpPortCdpRemAddress' object.		.1.3.6.1.4.1.2272.1.220.1.2.2.1.3
rcLldpPortCdpRemAddress The string value used to identify the management address component associated with the remote system. It is reported in the Address TLV of the most recently received CDP message. And it is associated with rcLldpPortC…	LLDP-MIBLldpManAddress Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.220.1.2.2.1.4
rcLldpPortCdpRemVersion The Version string as reported in CDP message	SNMPv2-TCDisplayString Constraints: range: 0-1000 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.220.1.2.2.1.5
rcLldpPortCdpRemDeviceIdType An indication of the format of Device Id (rcLldpPortCdpRemDeviceId) of remote device.	Enumeration Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.220.1.2.2.1.6
rcLldpPortCdpRemDeviceId The value of string of remote device as reported in CDP message. The zero-length string indicates no Device-ID field TLV reported	SNMPv2-TCDisplayString Constraints: range: 0-80 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.220.1.2.2.1.7
rcLldpPortCdpRemPortId The string value used to identify the port component associated with the remote system. This will typically be the value of the ifName	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.220.1.2.2.1.8
rcLldpPortCdpRemPlatform The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.220.1.2.2.1.9
rcLldpPortCdpRemCapabilities The bitmap value used to identify which system capabilities are supported on the retome system.	LLDP-MIBLldpSystemCapabilitiesMap Type Values: 0 other 1 repeater 2 bridge 3 wlanAccessPoint 4 router 5 telephone 6 docsisCableDevice 7 stationOnly	.1.3.6.1.4.1.2272.1.220.1.2.2.1.10
rcLldpPortCdpRemSysName The string value used to identify the system name of the remote system. The valud of sysName MIB objec	OctetString	.1.3.6.1.4.1.2272.1.220.1.2.2.1.11
rcLldpPortCdpRemLastChange Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.220.1.2.2.1.12

rcLldpRemExtendedTable

table

.1.3.6.1.4.1.2272.1.220.1.2.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcLldpRemExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcLldpRemExtendedTable'

Copy

This table is a extended table of lldpRemTable.
It contains additional objects for lldpRemTable

rcLldpRemExtendedEntry row .1.3.6.1.4.1.2272.1.220.1.2.3.1

Information about a particular physical network connection.
This entry is additinal objects of the lldpRemTable

Indexes

No indexes recorded

Column	Syntax	OID
rcLldpRemExtendedProtocolType Indicates the entry is CDP or LLDP protocol	Enumeration	.1.3.6.1.4.1.2272.1.220.1.2.3.1.1
rcLldpRemExtendedIpAddress The neighbor Ip address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.220.1.2.3.1.2

rcSflowStatsTable

table

.1.3.6.1.4.1.2272.1.221.1.1.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcSflowStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcSflowStatsTable'

Copy

This table is used to show/clear sflow statistics.

rcSflowStatsEntry row .1.3.6.1.4.1.2272.1.221.1.1.2.1

Entry containing sflow stats information.

Indexes

No indexes recorded

Column	Syntax	OID
rcSflowStatsIndex sflow Collector id.	Integer32	.1.3.6.1.4.1.2272.1.221.1.1.2.1.1
rcSflowStatsDatagramCount Number of datagrams sent to collector.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.221.1.1.2.1.2
rcSflowStatsClearStats Used to clear the sflow statistics.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.221.1.1.2.1.3

rcDigitalCertKeyTable

table

.1.3.6.1.4.1.2272.1.222.1.1.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDigitalCertKeyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDigitalCertKeyTable'

Copy

table containing all the information related to the key-pair, required
to get the Digital Certificate from the Certificate Authority.

rcDigitalCertKeyEntry row .1.3.6.1.4.1.2272.1.222.1.1.2.1

the entry specifies the key-pair
name, size and the algorithm used for the generation of key-pair.

Indexes

No indexes recorded

Column	Syntax	OID
rcDigitalCertKeyType defines the algorithm used to generate the key-pair	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.2.1.1
rcDigitalCertKeySize defines the size of the key-pair to be generated	Integer32	.1.3.6.1.4.1.2272.1.222.1.1.2.1.2
rcDigitalCertKeyName refers to the name of the key-pair generated for the subject. It is an auto generated entity, generated as the combination of key-type and key-size	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.2.1.3
rcDigitalCertKeyRowStatus used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.222.1.1.2.1.4

rcDigitalCertCaTable

table

.1.3.6.1.4.1.2272.1.222.1.1.3 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDigitalCertCaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDigitalCertCaTable'

Copy

table containing all the information related to the Certificate Authority issuing the Digital Certificate

rcDigitalCertCaEntry row .1.3.6.1.4.1.2272.1.222.1.1.3.1

entry containing
information about the Certificate Authority

Indexes

No indexes recorded

Column	Syntax	OID
rcDigitalCertCaName user defined name referring to the Certificate Authority issuing the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.3.1.1
rcDigitalCertCaCommonName defines the Common Name of the Certificate Authority issuing the Digital Certificate	OctetStringr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.2
rcDigitalCertCaKeyName defines the name of the associated key pair . It refers to the Key Name entry of the rcDigitalCertKeyTable	OctetStringr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.3
rcDigitalCertCaCaUrl defines the URL of the Certificate Authority issuing the Digital Certificate	OctetStringr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.4
rcDigitalCertCaAction specifies the various actions Certificate Authority can take- 'noop' - No operation 'caauth' - Certificate Authority (CA) authentication. 'enroll' - Certificate Enrolment Request. 'renew' - Certificate R…	Enumerationr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.5
rcDigitalCertCaActionChallengePassword specifies the challenge password required to perform the scep operation	OctetStringr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.6
rcDigitalCertCaLastActionStatus specifies the status of the last action 'none' - No action was performed yet. 'success' - Execution of the action triggered is completed successfully. 'failed' - Execution of the action trig…	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.3.1.7
rcDigitalCertCaLastActionFailureReason defines the reason of failure for the last action performed by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.3.1.8
rcDigitalCertCaInstallRootCaFileName installs the Root Certificate Authority's certificate obtained offline	OctetStringr/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.9
rcDigitalCertCaSubjectCertificateValidityDays number of days for which subject certificate will remain valid	Integer32r/w	.1.3.6.1.4.1.2272.1.222.1.1.3.1.10
rcDigitalCertCaUsePost specifies the HTTP request type : URL or POST , TRUE for EJBCA and FALSE for Win2012 CA	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.3.1.11
rcDigitalCertCaRowStatus used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.222.1.1.3.1.12

rcDigitalCertTable

table

.1.3.6.1.4.1.2272.1.222.1.1.4 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDigitalCertTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDigitalCertTable'

Copy

table of information about digital certificate

rcDigitalCertEntry row .1.3.6.1.4.1.2272.1.222.1.1.4.1

entry containing
information about digital certificates

Indexes

No indexes recorded

Column	Syntax	OID
rcDigitalCertType uniquely identifies the certificate 'onlineCaCert' - Certificate Authority's Certificate obtained Online from Certificate Authority 'onlineSubjectCert' - Subject Certificate obtained Online from Certificate Autho…	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.4.1.1
rcDigitalCertVersionNumber specifies the version number of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.2
rcDigitalCertSerialNumber specifies the serial number of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.3
rcDigitalCertIssuerName specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.4
rcDigitalCertValidStartPeriod specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.222.1.1.4.1.5
rcDigitalCertValidEndPeriod specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.222.1.1.4.1.6
rcDigitalCertCertificateSignatureAlgorithm specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.4.1.7
rcDigitalCertCertificateSignature specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.8
rcDigitalCertSubject specifies the details of the subject on its certificate as issued by Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.9
rcDigitalCertSubjectPublicKeyAlgorithm specifies the algorithm used to generate the subject's public key for the certificate issued by the Certificate Authority	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.4.1.10
rcDigitalCertSubjectPublicKey specifies the public key of the subject used to the Certificate Signing Request	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.11
rcDigitalCertHasBasicConstraint specifies whether certificate contains basic certificate constraint	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.4.1.12
rcDigitalCertHasKeyUsage specifies whether certificate contains basic key usage constraint	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.4.1.13
rcDigitalCertIsCa specifies if this is ca certificate or not	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.4.1.14
rcDigitalCertKeyUsage specifies the purpose of the key used in the certificate.It is represented in form of bits as follows- bit 0 - digitalSignature bit 1 - nonRepudiation bit 2 - keyEncipherment bit 3 - dataEncipherment bit 4 - keyAgreemen…	Bits	.1.3.6.1.4.1.2272.1.222.1.1.4.1.15
rcDigitalCertStatus specifies the status of the certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.16
rcDigitalCertInstalled specifies whether the certificate is installed or not	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.4.1.17
rcDigitalCertCdpUrl specifies the CDP URL present in the Extensions field of the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.18
rcDigitalCertOcspUrl specifies the OCSP URL present in the AIA field of the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.19
rcDigitalCertExtendedKeyUsage specifies the purpose for which the key may be used, in addition to or in place of the basic purposes indicated in the key-usage field of the certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.4.1.20

rcDigitalCertStoreTable

table

.1.3.6.1.4.1.2272.1.222.1.1.5 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the nortel variant from /opt/observium/mibs/nortel.

Command help

Walk rcDigitalCertStoreTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-CITY' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-CITY::rcDigitalCertStoreTable'

Copy

table of information about offline intermidate CA and root certificate

rcDigitalCertStoreEntry row .1.3.6.1.4.1.2272.1.222.1.1.5.1

entry containing
information about offline intermidate CA and root digital certificates

Indexes

No indexes recorded

Column	Syntax	OID
rcDigitalCertStoreType uniquely identifies the certificate 'caCert' - Certificate Authority's Certificate 'rootCaCert' - Root Certificate Authority's Certificate	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.5.1.1
rcDigitalCertStoreCommonName defines the Common Name of the Certificate Authority issuing the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.2
rcDigitalCertStoreVersionNumber specifies the version number of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.3
rcDigitalCertStoreSerialNumber specifies the serial number of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.4
rcDigitalCertStoreIssuerName specifies the issuer's name of the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.5
rcDigitalCertStoreValidStartPeriod specifies the start date of the validation period of the certificate for the subject as issued by the Certificate Authority	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.222.1.1.5.1.6
rcDigitalCertStoreValidEndPeriod specifies the last date of the validation period of the certificate for the subject as issued by the Certificate Authority	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.222.1.1.5.1.7
rcDigitalCertStoreCertificateSignatureAlgorithm specifies the algorithm used for the issuer's signature on the certificate for the subject as issued by the Certificate Authority	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.5.1.8
rcDigitalCertStoreCertificateSignature specifies the issuer's signature on the certificate for the subject as issued by the Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.9
rcDigitalCertStoreSubject specifies the details of the subject on its certificate as issued by Certificate Authority	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.10
rcDigitalCertStoreSubjectPublicKeyAlgorithm specifies the algorithm used to generate the subject's public key for the certificate issued by the Certificate Authority	Enumeration	.1.3.6.1.4.1.2272.1.222.1.1.5.1.11
rcDigitalCertStoreSubjectPublicKey specifies the public key of the subject used to the Certificate Signing Request	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.12
rcDigitalCertStoreHasBasicConstraint specifies whether certificate contains basic certificate constraint	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.5.1.13
rcDigitalCertStoreHasKeyUsage specifies whether certificate contains basic key usage constraint	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.5.1.14
rcDigitalCertStoreIsCa specifies if this is ca certificate or not	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.5.1.15
rcDigitalCertStoreKeyUsage specifies the purpose of the key used in the certificate.It is represented in form of bits as follows- bit 0 - digitalSignature bit 1 - nonRepudiation bit 2 - keyEncipherment bit 3 - dataEncipherment bit 4 - keyAgreemen…	Bits	.1.3.6.1.4.1.2272.1.222.1.1.5.1.16
rcDigitalCertStoreStatus specifies the status of the certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.17
rcDigitalCertStoreInstalled specifies whether the certificate is installed or not	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.222.1.1.5.1.18
rcDigitalCertStoreCdpUrl specifies the CDP URL present in the Extensions field of the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.19
rcDigitalCertStoreOcspUrl specifies the OCSP URL present in the AIA field of the Digital Certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.20
rcDigitalCertStoreExtendedKeyUsage specifies the purpose for which the key may be used, in addition to or in place of the basic purposes indicated in the key-usage field of the certificate	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.21
rcDigitalCertStoreCaFileName stores the intermediate and root Certificate Authority's certificate filename obtained offline	OctetString	.1.3.6.1.4.1.2272.1.222.1.1.5.1.22