LIGHTSTREAM-MIB Table View

Card specific information

cardEntry row .1.3.6.1.4.1.711.2.1.2.1.1

An entry in the chassis card table. (1-n)

Indexes

cardIndex

Column	Syntax	OID
cardIndexmandatory Unique Index consisting of card number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.2.1.1.1
cardNamemandatory Name of Card	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.711.2.1.2.1.1.2
cardBoardTypemandatory Board type of this card.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.711.2.1.2.1.1.3
cardLcSoftwareVersionmandatory Software revision of process running in the line card	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.711.2.1.2.1.1.4
cardLccSoftwareVersionmandatory Software revision of process controlling card	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.711.2.1.2.1.1.5
cardPIDmandatory Unique Process ID for LCC process (from OS).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.2.1.1.6
cardMaxVCsmandatory Maximum Virtual Circuits Supported by this card	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.2.1.1.7
cardOperStatusmandatory Card Operational status	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 empty	.1.3.6.1.4.1.711.2.1.2.1.1.8
cardAdminStatusmandatory Administratively Desired Status of this card	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.711.2.1.2.1.1.9
cardStatusWordmandatory Card status word, for use with the UB Net/Director product	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.2.1.1.10
cardConfigRegistermandatory Actual Card Enable Status as read from status register	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 empty	.1.3.6.1.4.1.711.2.1.2.1.1.11

Port specific information

portInfoEntry row .1.3.6.1.4.1.711.2.1.3.1.1

An entry in the Edge Port table.

Indexes

portInfoIndex

Column	Syntax	OID
portInfoIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.3.1.1.1
portInfoTypemandatory Object id of the port information table used with this port. (e.g. ls1InfoTable for the low speed line card version 1	Enumeration Enumerated Values: 1 empty 2 error 3 unknown 4 switch 5 np 6 lsEdge 7 lsTrunk 8 msTrunk 10 msEdge 11 plc12fac1 12 plc18eac1 13 plc1Lstoken 14 plc18sac1Edge 15 plc18sac1Trunk 30 clc1Gen 31 clc12oc3ac1Edge 32 clc12oc3ac1Trunk 33 clc18t3ac1Edge 34 clc18t3ac1Trunk 35 clc12taxiac1Edge 36 clc12taxiac1Trunk 37 clc18t1e1cbrac1	.1.3.6.1.4.1.711.2.1.3.1.1.2
portInfoSpecificmandatory Object id of the port information table used with this port. (e.g. ls1InfoTable for the low speed line card version 1	ObjectIdentifier	.1.3.6.1.4.1.711.2.1.3.1.1.3
portInfoNamemandatory The name of this port. This is primary used as a help aid to identification. There is no absolute need for it to be set.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.711.2.1.3.1.1.4
portInfoErrorLimitmandatory The maximum error for this port, expressed as an inverse power of ten. I.E. 3 sets an acceptable error rate of 10**-3 receive+transmit errors. When this object is set to the value 0, the error limit trap…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.3.1.1.5

Edge Port Address table specific Information

ls1InfoEntry row .1.3.6.1.4.1.711.2.1.4.1.1

An entry in the Edge Port Address table.

Indexes

ls1InfoIfIndex

Column	Syntax	OID
ls1InfoIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.1
ls1InfoTypemandatory Level 1 interface type used for this port	Enumeration Enumerated Values: 1 v35 2 rs422 3 rs530 4 t1 99 unknown	.1.3.6.1.4.1.711.2.1.4.1.1.2
ls1InfoOperCsuTypemandatory Identifier of operational CSU Interface	Enumeration Enumerated Values: 1 none 2 larse	.1.3.6.1.4.1.711.2.1.4.1.1.3
ls1InfoAdminCsuTypemandatory Identifier of administartively specified CSU Interface	Enumerationr/w Enumerated Values: 1 none 2 larse	.1.3.6.1.4.1.711.2.1.4.1.1.4
ls1InfoOperRcvBaudRatemandatory Operation receive baud rate	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.5
ls1InfoAdminRcvBaudRatemandatory Adminsitratively desired receive baud rate	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.6
ls1InfoOperXmitBaudRatemandatory Operation transmit baud rate.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.7
ls1InfoAdminXmitBaudRatemandatory Admistratively desired transmission baud rate	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.8
ls1InfoOperNetIntTypemandatory Operational network Interface Type for this port: DCE, DTE, or DCE with local tt loopback. This last option provides the ability to interface to DTE devices which are unable to return the tt signal as required for full…	Enumeration Enumerated Values: 1 dce 2 dte 3 dceTTloop	.1.3.6.1.4.1.711.2.1.4.1.1.9
ls1InfoAdminNetIntTypemandatory Administrative or desired Network Interface Type for DCE, DTE, or DCE with local tt loopback. This last option provides the ability to interface to DTE devices which are unable to return the tt signal as required for …	Enumerationr/w Enumerated Values: 1 dce 2 dte 3 dceTTloop	.1.3.6.1.4.1.711.2.1.4.1.1.10
ls1InfoOperModemStatemandatory Operational Status of certain modem signals. A bitmask which gives the current state of certain modmem signals is returned. If the Port is configured as a DTE, bit 0 will be DCD and bit 1 DSR. If the Port is configur…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.13
ls1InfoOperProtocolmandatory Operational higher level protocol stack to support on this port.	Enumeration Enumerated Values: 1 trunk 2 frameRelay 3 frameForwarding 4 ppp 5 unknown	.1.3.6.1.4.1.711.2.1.4.1.1.15
ls1InfoAdminProtocolmandatory Administratively desired higher level protocol stack to support on this port.	Enumerationr/w Enumerated Values: 1 trunk 2 frameRelay 3 frameForwarding 4 ppp 5 unknown	.1.3.6.1.4.1.711.2.1.4.1.1.16
ls1InfoOperControlBandwidthSizemandatory The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by ls1InfoOperRcvBaudRate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.21
ls1InfoAdminControlBandwidthSizemandatory The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable ls1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.22
ls1InfoOperDataBandwidthSizemandatory The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by ls1InfoOperRcvBaudRate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.23
ls1InfoAdminDataBandwidthSizemandatory The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable ls1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor. Th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.24
ls1InfoOperLoopModemandatory Operational loop mode for this port: none, internal, external, or remote	Enumeration Enumerated Values: 1 none 2 internal 3 external 4 remote	.1.3.6.1.4.1.711.2.1.4.1.1.25
ls1InfoAdminLoopModemandatory Administrative or desired loop mode for this port: none, internal, external, or remote	Enumerationr/w Enumerated Values: 1 none 2 internal 3 external 4 remote	.1.3.6.1.4.1.711.2.1.4.1.1.26
ls1InfoLcAutoEnablemandatory State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will remain disabled until configured and started by the LCC software on the NP. This parameter…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.711.2.1.4.1.1.27
ls1InfoLcDebugLevelmandatory Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.28
ls1InfoDataCellCapacitymandatory The portion of this port's capacity in cells that is allocated for data traffic.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.29
ls1InfoDataCellAvailablemandatory The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth consumed by VCs created using this port. It does not count VCs which have been configured …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.30
ls1InfoMeasuredBaudRatemandatory This is the line rate as measured from the line card.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.31
ls1InfoLinkUtilizationmandatory This is an estimated utilization on the link.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.1.1.32
ls1InfoAdminOperTriggermandatory When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.	Enumerationr/w Enumerated Values: 1 trigger 99 other	.1.3.6.1.4.1.711.2.1.4.1.1.99

Edge Port Address table specific Information

ms1InfoEntry row .1.3.6.1.4.1.711.2.1.4.2.1

An entry in the Edge Port Address table.

Indexes

ms1InfoIfIndex

Column	Syntax	OID
ms1InfoIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.1
ms1InfoOperCableLengthmandatory Operational value for Cable Length used for this port.	Enumeration Enumerated Values: 1 t3CableLength1 2 t3CableLength2 3 e3CableLength1 4 e3CableLength2 5 e3CableLength3 6 e3CableLength4	.1.3.6.1.4.1.711.2.1.4.2.1.2
ms1InfoAdminCableLengthmandatory Administrative value for Cable Length used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.	Enumerationr/w Enumerated Values: 1 t3CableLength1 2 t3CableLength2 3 e3CableLength1 4 e3CableLength2 5 e3CableLength3 6 e3CableLength4	.1.3.6.1.4.1.711.2.1.4.2.1.3
ms1InfoOperProtocolmandatory Operational higher level protocol stack to support on this port.	Enumeration Enumerated Values: 1 trunk 2 atmUni 3 unknown	.1.3.6.1.4.1.711.2.1.4.2.1.4
ms1InfoAdminProtocolmandatory Administratively desired higher level protocol stack to support on this port.	Enumerationr/w Enumerated Values: 1 trunk 2 atmUni 3 unknown	.1.3.6.1.4.1.711.2.1.4.2.1.5
ms1InfoOperControlBandwidthSizemandatory The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.10
ms1InfoAdminControlBandwidthSizemandatory The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.11
ms1InfoOperDataBandwidthSizemandatory The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.12
ms1InfoAdminDataBandwidthSizemandatory The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor. Th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.13
ms1InfoLcAutoEnablemandatory State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will remain disabled until configured and started by the LCC software on the NP. This parameter…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.711.2.1.4.2.1.14
ms1InfoLcDebugLevelmandatory Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.15
ms1InfoOperScramblemandatory Operational value for Cell Payload scrambling used for this port.	Enumeration Enumerated Values: 1 t3ScrambleEnable 2 t3ScrambleDisable	.1.3.6.1.4.1.711.2.1.4.2.1.16
ms1InfoAdminScramblemandatory Administrative value for Cell Payload scrambling used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.	Enumerationr/w Enumerated Values: 1 t3ScrambleEnable 2 t3ScrambleDisable	.1.3.6.1.4.1.711.2.1.4.2.1.17
ms1InfoDataCellCapacitymandatory The portion of this port's capacity in cells that is allocated for data traffic.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.18
ms1InfoDataCellAvailablemandatory The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth consumed by VCs created using this port. It does not count VCs which have been configured …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.19
ms1InfoLinkUtilizationmandatory This is an estimated utilization on the link.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.2.1.20
ms1InfoOperFramingmandatory Operational ATM framing typein use on this port.	Enumeration Enumerated Values: 1 plcp 2 t3-Hec 3 g-804	.1.3.6.1.4.1.711.2.1.4.2.1.21
ms1InfoAdminOperTriggermandatory When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.	Enumerationr/w Enumerated Values: 1 trigger 99 other	.1.3.6.1.4.1.711.2.1.4.2.1.99

Edge Port Address table specific Information

npInfoEntry row .1.3.6.1.4.1.711.2.1.4.3.1

An entry in the NP configuration table.

Indexes

npInfoIfIndex

Column	Syntax	OID
npInfoIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.1
npInfoIPCommittedRatemandatory Default committed rate for IP circuits	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.5
npInfoIPCommittedBurstmandatory Default committed burst rate for IP circuits	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.6
npInfoIPExcessRatemandatory Default excess rate for IP circuits	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.7
npInfoIPExcessBurstmandatory Default excess burst rate for IP circuits	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.8
npInfoIPNCircuitsmandatory Number of IP circuits supported	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.3.1.9
npInfoAdminOperTriggermandatory When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.	Enumerationr/w Enumerated Values: 1 trigger 99 other	.1.3.6.1.4.1.711.2.1.4.3.1.99

Edge Port Address table specific Information

clc1InfoEntry row .1.3.6.1.4.1.711.2.1.4.4.1

An entry in the Edge Port Address table.

Indexes

clc1InfoIfIndex

Column	Syntax	OID
clc1InfoIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.1
clc1InfoOperProtocolmandatory Operational higher level protocol stack to support on this port.	Enumeration Enumerated Values: 1 trunk 2 atmUni 3 unknown	.1.3.6.1.4.1.711.2.1.4.4.1.4
clc1InfoAdminProtocolmandatory Administratively desired higher level protocol stack to support on this port.	Enumerationr/w Enumerated Values: 1 trunk 2 atmUni 3 unknown	.1.3.6.1.4.1.711.2.1.4.4.1.5
clc1InfoOperLoopModemandatory Operational loop mode for this port: none, internal, or external.	Enumeration Enumerated Values: 1 none 2 internal 3 external	.1.3.6.1.4.1.711.2.1.4.4.1.6
clc1InfoAdminLoopModemandatory Administrative or desired loop mode for this port: none, internal, or external.	Enumerationr/w Enumerated Values: 1 none 2 internal 3 external	.1.3.6.1.4.1.711.2.1.4.4.1.7
clc1InfoOperControlBandwidthSizemandatory The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by the port bit rate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.10
clc1InfoAdminControlBandwidthSizemandatory The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable clc1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.11
clc1InfoOperDataBandwidthSizemandatory The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by the port bit rate and the result divided by 1000 to derive the actual bandwidth.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.12
clc1InfoAdminDataBandwidthSizemandatory The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable clc1InfoAdimOperTrigger will cause this value to become the operation value. This is a scaling factor. T…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.13
clc1InfoLcAutoEnablemandatory State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will remain disabled until configured and started by the LCC software on the NP. This parameter…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.711.2.1.4.4.1.14
clc1InfoLcDebugLevelmandatory Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.15
clc1InfoOperScramblemandatory Operational value for Cell Payload scrambling used for this port.	Enumeration Enumerated Values: 1 scrambleEnable 2 scrambleDisable	.1.3.6.1.4.1.711.2.1.4.4.1.16
clc1InfoAdminScramblemandatory Administrative value for Cell Payload scrambling used for this port. Setting the trigger variable clc1InfoAdimOperTrigger will cause this value to become the operation value.	Enumerationr/w Enumerated Values: 1 scrambleEnable 2 scrambleDisable	.1.3.6.1.4.1.711.2.1.4.4.1.17
clc1InfoDataCellCapacitymandatory The portion of this port's capacity in cells that is allocated for data traffic.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.18
clc1InfoDataCellAvailablemandatory The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth consumed by VCs created using this port. It does not count VCs which have been configured …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.19
clc1InfoLinkUtilizationmandatory This is an estimated utilization on the link.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.4.4.1.20
clc1InfoOperClockmandatory Operational value for the source of transmit clock for this port.	Enumeration Enumerated Values: 1 internalClock 2 externalClock	.1.3.6.1.4.1.711.2.1.4.4.1.21
clc1InfoAdminClockmandatory Administrative value for the source of transmit clock used for this port. Setting the trigger variable clc1InfoAdimOperTrigger will cause this value to become the operation value.	Enumerationr/w Enumerated Values: 1 internalClock 2 externalClock	.1.3.6.1.4.1.711.2.1.4.4.1.22
clc1InfoAdminOperTriggermandatory When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.	Enumerationr/w Enumerated Values: 1 trigger 99 other	.1.3.6.1.4.1.711.2.1.4.4.1.99

Edge Port Address table specific Information

oc3InfoEntry row .1.3.6.1.4.1.711.2.1.4.5.1

An entry in the Edge Port Address table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
oc3InfoReceiveSignalDetectmandatory This value indicates that a receive signal has been detected on thei port	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.4.5.1.1
oc3InfoTransmitSafetySwitchmandatory State of the Safety Switch with the single mode interface. When the saftey switch is enabled, the laser is disabled. This variable is undefined for multimode interfaces.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.711.2.1.4.5.1.2
oc3InfoMediumTypemandatory This variable identifies whether a SONET or a SDH signal is used across this interface.	Enumerationr/w Enumerated Values: 1 sonet 2 sdh	.1.3.6.1.4.1.711.2.1.4.5.1.3

Table of current file transfers

mmaNumNameEntry row .1.3.6.1.4.1.711.2.1.6.16.1

An entry in the file transfer table.

Indexes

mmaNumNameNumber

Column	Syntax	OID
mmaNumNameNumbermandatory Unique Index consisting of chassis ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.6.16.1.1
mmaNumNamemandatory Name of chassis corresponding to value of mmaNumNameNumber.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.711.2.1.6.16.1.2

Collector table of current collections

collectEntry row .1.3.6.1.4.1.711.2.1.7.1.1

An entry in the Collector collection table. (1-n)

Indexes

collectIndex

Column	Syntax	OID
collectIndexmandatory Unique Index consisting of collection number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.1.1.1
collectStatusmandatory Collection status of this collection row entry.	Enumerationr/w Enumerated Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.711.2.1.7.1.1.2
collectStartmandatory Collection start time. If specified and status is valid means a collection will start at time. Time is the UNIX real time in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.1.1.3
collectFinishmandatory Collection finish time in TOD seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.1.1.4
collectIntervalmandatory Collection Interval, in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.1.1.5
collectFileNamemandatory Automatically generated filename for this collection. The file name is 'Collect.n' where 'n' is the collectIndex.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.711.2.1.7.1.1.6
collectFileSizemandatory Max Size of the circular file named in collectFileName. Actual maximum size of file is value of collectFileSize * 1024.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.1.1.7
collectOperStatusmandatory Collection status of this collection row entry.	Enumerationr/w Enumerated Values: 1 waiting 2 running 3 underCreation	.1.3.6.1.4.1.711.2.1.7.1.1.8

Collector table of current collections

collectDbEntry row .1.3.6.1.4.1.711.2.1.7.2.1

An entry in the Collector group database. (1-n)

Indexes

collectDBIndex collectDBInstance

Column	Syntax	OID
collectDBIndexmandatory Unique Index equal to collectIndex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.2.1.1
collectDBInstancemandatory Record instance within a group ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.7.2.1.2
collectDBObjectIDmandatory Object identifier of a member of a group specified by the group ID and instance.	ObjectIdentifierr/w	.1.3.6.1.4.1.711.2.1.7.2.1.3
collectDBStatusmandatory Collection status of this collection database row entry.	Enumerationr/w Enumerated Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.711.2.1.7.2.1.4

EdgePort Port Address table specific information

edgePortEntry row .1.3.6.1.4.1.711.2.1.8.1.1.1

An entry in the EdgePort Port Address table.

Indexes

edgeIfIndex

Column	Syntax	OID
edgeIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.1
edgeUpcTypemandatory Usage Parameter Control model type. This parameter selects the UPC model, which regulates the flow of data into the network.	Enumerationr/w Enumerated Values: 1 ansiCompliant	.1.3.6.1.4.1.711.2.1.8.1.1.1.2
edgeUserDataPerCellmandatory User data bits per cell. This specifies the expected packing efficiency when frames are converted to cells. It does not affect the actual packing of data into cells but serves as an estimate on which bandwidth allocat…	Integer32r/w Constraints: range: 1-384	.1.3.6.1.4.1.711.2.1.8.1.1.1.3
edgeCellDelayVariancemandatory Cell Delay Variance in microseconds. This is the typical variance in the delay added as a cell is processed by an switch	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.4
edgePrincipalScalemandatory Principal bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the principal portion of a VC's bandwidth. This is specified as a codepoint as follows: Co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.5
edgeSecondaryScalemandatory Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as follows: Co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.6
edgeMeteringFactormandatory Scale factor for the metering time charge, a value (divided by 256) by which to increase the time or slow down metering of traffic into the network. A value of 256 would typically keep the metering rate close to the m…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.7
edgeMeteringBurstSizemandatory This is the minimum number of cells to burst at a time	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.1.1.1.8
edgeCallSetupRetrymandatory This specifies the initial time to wait between successive failed attempts to establish a connection. This interval is in seconds. An incremental backoff algorithm may applied to this value. See Parameter edgeCallSet…	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.711.2.1.8.1.1.1.9
edgeCallSetupBackoffmandatory This specifies the maximum power of 2 to backoff in call setup retry attempts. For each retry up to this maxumim the retry timer will be adjusted by multipliing by 2**(n). The first retry will be multiplied by 2**0 or …	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.711.2.1.8.1.1.1.10
edgeMaxFrameSizemandatory This specifies the maximum frame size that can be transmitted on this edge port. The size is specified in bytes.	Integer32r/w Constraints: range: 48-8152	.1.3.6.1.4.1.711.2.1.8.1.1.1.11

The Parameters for the Data Link Connection Management
Interface for the frame relay service on this
interface.

frProvMiEntry row .1.3.6.1.4.1.711.2.1.8.2.1.1

The Parameters for a particular Data Link Con-
nection Management Interface.

Indexes

frProvMiIfIndex

Column	Syntax	OID
frProvMiIfIndexmandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.2.1.1.1
frProvMiStatemandatory This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface.	Enumerationr/w Enumerated Values: 1 noLmiConfigured 2 lmiFRIF 3 ansiT1-617-D 4 ccittQ-933-A	.1.3.6.1.4.1.711.2.1.8.2.1.1.2
frProvMiAddressLenmandatory This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion.	Enumerationr/w Enumerated Values: 2 two-octets	.1.3.6.1.4.1.711.2.1.8.2.1.1.3
frProvMiNetRequestIntervalmandatory This is the maximum number of seconds between successive status enquiry messages. If a status enquiry message does not arrive within this time an error event occurs. This is also refered to as T392 and nT2. …	Integer32r/w Constraints: range: 5-30	.1.3.6.1.4.1.711.2.1.8.2.1.1.4
frProvMiNetErrorThresholdmandatory This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down by the network side of the interface. This is also refered to as N392 and nN2.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.711.2.1.8.2.1.1.5
frProvMiNetMonitoredEventsmandatory This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interf…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.711.2.1.8.2.1.1.6
frProvMiMaxSupportedVCsmandatory The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. This variable will limit the creation of more than this number of VCs. It will not delete VCs which…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.2.1.1.7
frProvMiMulticastmandatory This indicates whether the Frame Relay inter- face is using a multicast service.	Enumerationr/w Enumerated Values: 1 nonBroadcast	.1.3.6.1.4.1.711.2.1.8.2.1.1.8
frProvMiUserPollingIntervalmandatory This is the number of seconds between succes- sive status enquiry messages sent by the user portion of a NNI interface. This is also refered to as T391 and nT1.	Integer32r/w Constraints: range: 5-30	.1.3.6.1.4.1.711.2.1.8.2.1.1.9
frProvMiUserFullEnquiryIntervalmandatory Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage by the user portion of a NNI interface. This is also refered to as N391 and nN1.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.711.2.1.8.2.1.1.10
frProvMiUserErrorThresholdmandatory This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down by the user side of the NNI interface. This is also refered to as N392 and nT2.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.711.2.1.8.2.1.1.11
frProvMiUserMonitoredEventsmandatory This is the number of status polling intervals over which the error threshold is counted on a NNI interface. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.711.2.1.8.2.1.1.12
frProvMiNetInterfaceTypemandatory This variable states which type of Network Interface should be used. UNI provides for a User Network Interface, while NNI provides for a Network to Network Interface.	Enumerationr/w Enumerated Values: 1 niUNI 2 niNNI	.1.3.6.1.4.1.711.2.1.8.2.1.1.13

A table containing information about specific DLCIs and
corresponding circuits.

frCktEntry row .1.3.6.1.4.1.711.2.1.8.3.1.1

The information regarding a single Data Link
Connection Identifier.

Indexes

frCktSrcIfIndex frCktSrcDlci

Column	Syntax	OID
frCktSrcNodemandatory The Node Identifier for the source end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.1
frCktSrcIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See comments above to calculate ifIndex value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.2
frCktSrcDlcimandatory The Data Link Connection Identifier for this virtual circuit.	LightStreamDLCI	.1.3.6.1.4.1.711.2.1.8.3.1.1.3
frCktAdminDestNodemandatory The Node Identifier for the Destination end of this virtual circuit. This variable takes effect when frCktStatus is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.10
frCktOperDestNodemandatory The Node Identifier for the Destination end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.11
frCktAdminDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See comments above to calculate ifIndex. This variable takes effect when frCktStatus is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.12
frCktOperDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See comments above to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.13
frCktAdminDestDlcimandatory The Data Link Connection Identifier for this virtual circuit. This variable takes effect when frCktStatus is set.	LightStreamDLCIr/w	.1.3.6.1.4.1.711.2.1.8.3.1.1.14
frCktOperDestDlcimandatory The Data Link Connection Identifier for this virtual circuit.	LightStreamDLCI	.1.3.6.1.4.1.711.2.1.8.3.1.1.15
frCktAdminSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from Source to Destination. It is specified in bits per second. This variable takes effe…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.25
frCktOperSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from source to destination. It is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.26
frCktAdminSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from source to destina…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.27
frCktOperSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from source to destinat…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.28
frCktAdminSrcMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to support from source to destination. It is specified in bits per second. This variable takes…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.29
frCktOperSrcMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to support from source to destination. It is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.30
frCktAdminSrcMaxBurstmandatory This variable indicates the Total Burst Size, which is the maximum amount of insured plus uninsured data bytes that the network will at- tempt to deliver over the measurement interval from the Source to the Destination.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.31
frCktOperSrcMaxBurstmandatory This variable indicates the Total Burst Size, which is the maximum amount of insured plus uninsured data bytes that the network will at- tempt to deliver over the measurement interval from the Source to the Destination.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.32
frCktAdminDestInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. It is specified in bits per second. This variable takes eff…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.33
frCktOperDestInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. It is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.34
frCktAdminDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from destination to…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.35
frCktOperDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from destination to …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.36
frCktAdminDestMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to transfer from destination to source. It is specified in bits per second. This variable take…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.37
frCktOperDestMaxRatemandatory This variable, the maximum rate is the total data throughput that the network will allow to pass on this VC under optimal network conditions from destination to source. It is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.38
frCktAdminDestMaxBurstmandatory This variable indicates the Total Burst Size, which is the maximum amount of insured plus uninsured data bytes that the network will at- tempt to deliver over the measurement interval from the Destination to the Source.…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.39
frCktOperDestMaxBurstmandatory This variable indicates the Total Burst Size, which is the maximum amount of insured plus uninsured data bytes that the network will at- tempt to deliver over the measurement interval from the Destination to the Source.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.40
frCktOperSecondaryScalemandatory Operational version of the Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.41
frCktAdminSecondaryScalemandatory Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as follows: Co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.1.1.42
frCktOperPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit.	Enumeration Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.3.1.1.43
frCktAdminPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit. This variable takes effect when frCktStatus is set.	Enumerationr/w Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.3.1.1.44
frCktOperTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.3.1.1.45
frCktAdminTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit. This variable takes effect when frCktStatus is set.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.3.1.1.46
frCktOperUserDataPerCellmandatory Operational User data bits per cell, specifies the expected packing efficiency when frames are converted to cells. It does not affect the actual packing of data into cells but serves as an estimate on which bandwidth al…	Integer32 Constraints: range: 0-384	.1.3.6.1.4.1.711.2.1.8.3.1.1.47
frCktAdminUserDataPerCellmandatory Administrative User data bits per cell, specifies the expected packing efficiency when frames are converted to cells. It does not affect the actual packing of data into cells but serves as an estimate on which bandwidt…	Integer32r/w Constraints: range: 0-384	.1.3.6.1.4.1.711.2.1.8.3.1.1.48
frCktStatusmandatory This variable indicates the Status of this Virtual Circuit. It may be enabled or disabled. In order to modify a Virtual Circuit, the new desired variables should be modified and then this variable shou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 delete	.1.3.6.1.4.1.711.2.1.8.3.1.1.99

A table containing information about specific DLCIs and
corresponding circuits.

frCktInfoEntry row .1.3.6.1.4.1.711.2.1.8.3.2.1

The information regarding a single Data Link
Connection Identifier.

Indexes

frCktInfoIfIndex frCktInfoDlci

Column	Syntax	OID
frCktInfoIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See comments above to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.2.1.1
frCktInfoDlcimandatory The Data Link Connection Identifier for this virtual circuit.	LightStreamDLCI	.1.3.6.1.4.1.711.2.1.8.3.2.1.2
frCktInfoLclLMImandatory This variable indicates the local LMI state of the circuit.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.3.2.1.3
frCktInfoRmtLMImandatory This variable indicates the remote LMI state of the circuit.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.3.2.1.4
frCktInfoCallIDIncomingmandatory This variable indicates the Call Identifier assigned to the incomming half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.2.1.5
frCktInfoCallIDOutgoingmandatory This variable indicates the Call Identifier assigned to the outgoing half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.2.1.6
frCktInfoDownstreamStatemandatory This variable indicates the state of the downstream half of the circuit. (passing data from the local port to the remote end of the network)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.3.2.1.7
frCktInfoUpstreamStatemandatory This variable indicates the state of the upstream half of the circuit. (passing data from the port at the remote end of the network to the local port)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.3.2.1.8
frCktInfoLastAtmErrmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow.	OctetString	.1.3.6.1.4.1.711.2.1.8.3.2.1.9
frCktInfoDataCellsRequiredmandatory This variable indicates the bandwidth in cells needed to establish this VC. The value returned combines the committed and the Secondary bandwidth needs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.3.2.1.10
frCktInfoLastAtmLocationmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow. The format of the string is: nodenum:ifIndex where all numbe…	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.711.2.1.8.3.2.1.11

A table containing information about Frame Forwarding
circuits for every port.

ffCktEntry row .1.3.6.1.4.1.711.2.1.8.4.1.1

The information regarding a single Data Link
Connection Identifier.

Indexes

ffCktSrcIfIndex

Column	Syntax	OID
ffCktSrcNodemandatory The Node Identifier for the source end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.1
ffCktSrcIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.2
ffCktAdminDestNodemandatory The Node Identifier for the Destination end of this virtual circuit. This variable takes effect when ffCktStatus is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.9
ffCktOperDestNodemandatory The Node Identifier for the Destination end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.10
ffCktAdminDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex. This variable takes effect when ffCktStatus is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.11
ffCktOperDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.12
ffCktAdminSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from source to destination. This is specified in bits per second. This variable takes e…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.21
ffCktOperSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from source to destination. This is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.22
ffCktAdminSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from source to destin…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.23
ffCktOperSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from source to destin…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.24
ffCktAdminSrcMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to transfer from source to destination. This is specified in bits per second. This variable ta…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.25
ffCktOperSrcMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to support from source to destination. This is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.26
ffCktAdminSrcMaxBurstmandatory This variable indicates the Total Burst Size, the maximum amount of insured plus uninsured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from sourc…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.27
ffCktOperSrcMaxBurstmandatory This variable indicates the Total Burst Size, the maximum amount of insured plus uninsured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from sourc…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.28
ffCktAdminDestInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. This is specified in bits per second. This variable takes e…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.29
ffCktOperDestInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. This is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.30
ffCktAdminDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from destination to s…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.31
ffCktOperDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from destination to …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.32
ffCktAdminDestMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to transfer from destination to source. This is specified in bits per second. This variable ta…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.33
ffCktOperDestMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to support from destination to source. This is specified in bits per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.34
ffCktAdminDestMaxBurstmandatory This variable indicates the Total Burst Size, the maximum amount of insured plus uninsured data, in bytes, that the network agrees to transfer during the measurement interval from destination to source. This var…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.35
ffCktOperDestMaxBurstmandatory This variable indicates the Total Burst Size, the maximum amount of insured plus uninsured data, in bytes, that the network agrees to transfer, during the measurement interval from destination to source.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.1.1.36
ffCktOperPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit.	Enumeration Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.4.1.1.37
ffCktAdminPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit. This variable takes effect when ffCktStatus is set.	Enumerationr/w Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.4.1.1.38
ffCktOperTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.4.1.1.39
ffCktAdminTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit. This variable takes effect when ffCktStatus is set.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.4.1.1.40
ffCktStatusmandatory This variable indicates the Status of this Virtual Circuit. It may be enabled or disabled. In order to modify a Virtual Circuit, the new desired variables should be modified and then this variable shou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 delete	.1.3.6.1.4.1.711.2.1.8.4.1.1.99

A table containing information about specific Frame
Forwarding virtual circuits.

ffCktInfoEntry row .1.3.6.1.4.1.711.2.1.8.4.2.1

The information regarding a single Data Link
Connection Identifier.

Indexes

ffCktInfoIfIndex

Column	Syntax	OID
ffCktInfoIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.2.1.1
ffCktInfoDownstreamStatemandatory This variable indicates the state of the downstream half of the circuit. (passing data from the local port to the remote end of the network)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.4.2.1.2
ffCktInfoUpstreamStatemandatory This variable indicates the state of the upstream half of the circuit. (passing data from the port at the remote end of the network to the local port)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.4.2.1.3
ffCktInfoCallIDIncomingmandatory This variable indicates the Call Identifier assigned to the incomming half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.2.1.4
ffCktInfoCallIDOutgoingmandatory This variable indicates the Call Identifier assigned to the outgoing half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.2.1.5
ffCktInfoLastAtmErrmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow.	OctetString	.1.3.6.1.4.1.711.2.1.8.4.2.1.6
ffCktInfoDataCellsRequiredmandatory This variable indicates the bandwidth in cells needed to establish this VC. The value returned combines the committed and the Secondary bandwidth needs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.4.2.1.7
ffCktInfoLastAtmLocationmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow. The format of the string is: nodenum:ifIndex where all numbe…	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.711.2.1.8.4.2.1.8

A table containing information about specific VCIs and
corresponding circuits.

sUniCktEntry row .1.3.6.1.4.1.711.2.1.8.5.1.1

The information regarding a single Data Link
Connection Identifier.

Indexes

sUniCktSrcIfIndex sUniCktSrcVCI

Column	Syntax	OID
sUniCktSrcNodemandatory The Node Identifier for the source end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.1
sUniCktSrcIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.2
sUniCktSrcVCImandatory The Data Link Connection Identifier for this virtual circuit.	VCI	.1.3.6.1.4.1.711.2.1.8.5.1.1.3
sUniCktAdminDestNodemandatory The Node Identifier for the Destination end of this virtual circuit. This variable takes effect when sUniCktSts is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.10
sUniCktOperDestNodemandatory The Node Identifier for the Destination end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.11
sUniCktAdminDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex. This variable takes effect when sUniCktSts is set.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.12
sUniCktOperDestIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.13
sUniCktAdminDestVCImandatory The Data Link Connection Identifier for this virtual circuit. This variable takes effect when sUniCktSts is set.	VCIr/w	.1.3.6.1.4.1.711.2.1.8.5.1.1.14
sUniCktOperDestVCImandatory The Data Link Connection Identifier for this virtual circuit.	VCI	.1.3.6.1.4.1.711.2.1.8.5.1.1.15
sUniCktOperPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit.	Enumeration Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.5.1.1.22
sUniCktAdminPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit. This variable takes effect when sUniCktSts is set.	Enumerationr/w Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.5.1.1.23
sUniCktOperTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.5.1.1.24
sUniCktAdminTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit. This variable takes effect when sUniCktSts is set.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.5.1.1.25
sUniCktAdminSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from source to destination. This is specified in cells per second. This …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.26
sUniCktOperSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from source to destination. This is specified in cells per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.27
sUniCktAdminSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in cells, that the network agrees to transfer under normal conditions, during the measurement interval from source to destina…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.28
sUniCktOperSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in cells, that the network agrees to transfer under normal conditions, during the measurement interval from source to destina…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.29
sUniCktAdminSrcMaxRatemandatory This variable, the maximum rate is the the total amount of insured plus uninsured data throughput that the network attempts to support under normal network conditions from destination to source. This is specified in ce…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.30
sUniCktOperSrcMaxRatemandatory This variable, the maximum rate is the the total amount of insured plus uninsured data throughput that the network attempts to support under normal network conditions from destination to source. This is specified in ce…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.31
sUniCktAdminSrcMaxBurstmandatory This variable is the maximum Burst Size, the maximum amount of insured plus uninsured data, in cells, that the network will attempt to deliver over the measurement interval from the Source to the Destination. This vari…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.32
sUniCktOperSrcMaxBurstmandatory This variable indicates the maximum Burst Size, the maximum amount of insured plus uninsured cells, that the network will attempt to deliver over the measurement interval from the Source to the Destination.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.33
sUniCktAdminDestInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. This is specified in cells per second. This variable takes …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.34
sUniCktOperDestInsuredRatemandatory This variable, the Insured Rate, is the rate of insured data that the network commits to supporting under normal network conditions from destination to source. This is specified in cells per second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.35
sUniCktAdminDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in cells, that the network agrees to transfer under normal conditions, during the measurement interval from destination to sou…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.36
sUniCktOperDestInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in cells, that the network agrees to transfer under normal conditions, during the measurement interval from destination to sou…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.37
sUniCktAdminDestMaxRatemandatory This variable, the maximum rate is the the total amount of insured plus uninsured data throughput that the network attempts to support under normal network conditions from destination to source. This is specified in ce…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.38
sUniCktOperDestMaxRatemandatory This variable, the maximum rate is the the total amount of insured plus uninsured data throughput that the network attempts to support under normal network conditions from destination to source. This is specified in ce…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.39
sUniCktAdminDestMaxBurstmandatory This variable is the maximum Burst Size, the maximum amount of insured plus uninsured cells that the network will attempt to deliver over the measurement interval from the Destination to the Source. This…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.40
sUniCktOperDestMaxBurstmandatory This variable indicates the maximum Burst Size, the maximum amount of insured plus uninsured cells that the network will attempt to deliver over the measurement interval from the Destination to the Source.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.41
sUniCktAdminSecondaryScalemandatory Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as follows: Co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.42
sUniCktOperSecondaryScalemandatory Operational version of the Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.1.1.43
sUniCktStsmandatory This variable indicates the Status of this Virtual Circuit. It may be enabled or disabled. In order to modify a Virtual Circuit, the new desired variables should be modified and then this variable shou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 delete	.1.3.6.1.4.1.711.2.1.8.5.1.1.99

A table containing information about specific VCIs and
corresponding circuits.

sUniCktInfoEntry row .1.3.6.1.4.1.711.2.1.8.5.2.1

The information regarding a single Data Link
Connection Identifier.

Indexes

sUniCktInfoIfIndex sUniCktInfoVCI

Column	Syntax	OID
sUniCktInfoIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.2.1.1
sUniCktInfoVCImandatory The Data Link Connection Identifier for this virtual circuit.	VCI	.1.3.6.1.4.1.711.2.1.8.5.2.1.2
sUniCktInfoUniToNetCallIDmandatory This variable indicates the Call Identifier assigned to the incomming half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.2.1.3
sUniCktInfoNetToUniCallIDmandatory This variable indicates the Call Identifier assigned to the outgoing half of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.2.1.4
sUniCktInfoUniToNetStatemandatory This variable indicates the state of the UniToNet half of the circuit. (passing data from the local port to the remote end of the network)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.5.2.1.5
sUniCktInfoNetToUniStatemandatory This variable indicates the state of the NetToUni half of the circuit. (passing data from the port at the remote end of the network to the local port)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.5.2.1.6
sUniCktInfoLastAtmErrmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow.	OctetString	.1.3.6.1.4.1.711.2.1.8.5.2.1.7
sUniCktInfoDataCellsRequiredmandatory This variable indicates the bandwidth in cells needed to establish this VC. The value returned combines the committed and the Secondary bandwidth needs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.5.2.1.8
sUniCktInfoLastAtmLocationmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow. The format of the string is: nodenum:ifIndex where all numbe…	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.711.2.1.8.5.2.1.9

A table containing information about specific PVCs.

pvcEntry row .1.3.6.1.4.1.711.2.1.8.6.1.1

The information regarding a single PVC.

Indexes

pvcSrcIfIndex pvcSrcPvcId

Column	Syntax	OID
pvcSrcIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.1
pvcSrcPvcIdmandatory The local PVC Connection Identifier for this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.2
pvcSrcNodemandatory The Node Identifier for the source end of this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.3
pvcSrcInsuredRatemandatory This variable, the Insured Rate is the rate of insured data that the network commits to supporting under normal network conditions from Source to Destination. It is specified in bits per second. This variable takes effe…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.4
pvcSrcInsuredBurstmandatory This variable indicates the Insured Burst Size, which is the amount of insured data, in bytes, that the network agrees to transfer under normal conditions, during the measurement interval from source to destina…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.5
pvcSrcMaxRatemandatory This variable, the Maximum Rate is the the maximum amount of insured plus uninsured data throughput that the network agrees to support from source to destination. It is specified in bits per second. This variable takes…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.6
pvcSrcMaxBurstmandatory This variable indicates the Total Burst Size, which is the maximum amount of insured plus uninsured data bytes that the network will at- tempt to deliver over the measurement interval from the Source to the Destination.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.7
pvcSecondaryScalemandatory Secondary bandwidth scaling factor. This is used to scale down the actual amount of bandwidth to allocate for the Secondary portion of a VC's bandwidth. This is specified as a codepoint as follows: Co…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.6.1.1.8
pvcPrinBwTypemandatory This variable indicates the type of service supported on primary portion of this Virtual Circuit. This variable takes effect when pvcStatus is set. This variable may not be modified unless pvcStatus is se…	Enumerationr/w Enumerated Values: 1 guaranteed 2 insured	.1.3.6.1.4.1.711.2.1.8.6.1.1.9
pvcTransPrimandatory This variable indicates the transfer priority supported on this Virtual Circuit. This variable takes effect when pvcStatus is set. This variable may not be modified unless pvcStatus is set to disabled.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.711.2.1.8.6.1.1.10
pvcUserDataPerCellmandatory User data bits per cell, specifies the expected packing efficiency when frames are converted to cells. It does not affect the actual packing of data into cells but serves as an estimate on which bandwidth allocation an…	Integer32r/w Constraints: range: 0-384	.1.3.6.1.4.1.711.2.1.8.6.1.1.11
pvcStatusmandatory This variable indicates the Status of this Virtual Circuit. It may be enabled or disabled. In order to modify a Virtual Circuit, the new desired variables should be modified and then this variable shou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 delete	.1.3.6.1.4.1.711.2.1.8.6.1.1.99

A table containing information about specific endpoints and
corresponding circuits.

mcEndptEntry row .1.3.6.1.4.1.711.2.1.8.7.1.1

The information regarding a single endpoint.

Indexes

mcEndptLclIfIndex mcEndptLclCktid mcEndptLclInstance

Column	Syntax	OID
mcEndptLclIfIndexmandatory The ifIndex Value of the ifEntry this virtual circuit is layered onto. See above comments to calculate ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.7.1.1.1
mcEndptLclCktidmandatory The Local Circuit Identifier for this virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.7.1.1.2
mcEndptLclInstancemandatory A Locally significant index used to separate the different remote endpoints for this multicast virtual circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.7.1.1.3
mcEndptDestmandatory The Destination for this segment of the multicast virtual circuit. The format of the string is: nodenum:ifIndex:cktID where all numbers are specified in decimal. For example 5142:6000:16 refers to the remote e…	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.711.2.1.8.7.1.1.4
mcEndptServiceTypemandatory This variable is provided for future expansion, to allow creation of VCs between dissimilar protocols. This variable cannot be modified while mcEndptStatus is set to active.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.7.1.1.5
mcEndptRmtVCstatusmandatory This variable indicates the remote state of the circuit. For FR this would be the LMI status.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.7.1.1.6
mcEndptCallIDIncomingmandatory This variable indicates the Call Identifier assigned to the incomming (from the net) direction of this circuit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.711.2.1.8.7.1.1.7
mcEndptDownstreamStatemandatory This variable indicates the state of the downstream direction of the circuit. (passing data from the local port to the remote end of the network)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.7.1.1.8
mcEndptUpstreamStatemandatory This variable indicates the state of the upstream direction of the circuit. (passing data from the port at the remote end of the network to the local port)	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.711.2.1.8.7.1.1.9
mcEndptLastAtmErrmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow.	OctetString	.1.3.6.1.4.1.711.2.1.8.7.1.1.10
mcEndptLastAtmLocationmandatory This variable indicates the last error, if any, returned by the Atm Connection Management layer when an attempt was made to create a connection or flow. The format of the string is: nodenum:ifIndex where all numbe…	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.711.2.1.8.7.1.1.11
mcEndptStatusmandatory This variable indicates the Status of this Virtual Circuit. It may be enabled or disabled. In order to modify a Virtual Circuit, the new desired variables should be modified and then this variable shou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 delete 4 createRequest 5 underCreation	.1.3.6.1.4.1.711.2.1.8.7.1.1.99