This trap message is reported when the patch rollback is successful.
hwPatRollBackFailTrap
.1.3.6.1.4.1.2011.6.6.2.5.1.0.2
This trap message is reported when the patch rollback fails.
hwPatColdPatDiffTrap
.1.3.6.1.4.1.2011.6.6.2.5.1.0.3
message is reported when the states of cold patches on the active and
standby control boards are inconsistent.
hwPatchInActiveTrap
.1.3.6.1.4.1.2011.6.6.2.5.1.0.4
message is reported when a patch stays in the activated state for 24 hours
for the first time. 24 hours later, if the patch is still in the activated state, this trap
message is reported every 6 hours.
hwPatchInDeActiveTrap
.1.3.6.1.4.1.2011.6.6.2.5.1.0.5
message is reported when a patch stays in the deactivated state for 24 hours
for the first time. 24 hours later, if the patch is still in the deactivated state, this trap
message is reported every 6 hours.
hwPatchRestoreTrap
.1.3.6.1.4.1.2011.6.6.2.5.1.0.6
message is reported when the standby control board is reset because the patch
statuses on the active and standby control boards are different.
hwPatchInActiveStateTrap
.1.3.6.1.4.1.2011.6.6.2.5.2.0.1
message is reported when a patch stays in the activated state for 24 hours for
the first time. 24 hours later, if the patch is still in the activated state, this trap message
is reported every 6 hours.
hwPatchInDeactiveStateTrap
.1.3.6.1.4.1.2011.6.6.2.5.2.0.2
message is reported when a patch stays in the deactivated state for 24 hours for the
first time. 24 hours later, if the patch is still in the deactivated state, this trap message is
reported every 6 hours.
hwColdPatchInconsistentTrap
.1.3.6.1.4.1.2011.6.6.2.5.2.0.3
message is reported when the states of cold patches on the active and
standby control boards are inconsistent.
hwPatchNeedResetBoardTrap
.1.3.6.1.4.1.2011.6.6.2.5.2.0.4
patch is activated or deleted, the operation takes effect in certain
cases only after board or system reset. In such cases, if the board or system
is not reset 24 hours after the patch is activated or deleted, this trap message
is sent. If the board or system has not reset all the time, this trap message
is sent once every 24 hours.
hwNoNeedSaveTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.1
o need to save the database.
After the database is saved, this trap message is reported when the database is saved again
while no change is made on the database.
hwBackupGuageTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.2
This trap message is reported when a backup operation starts and it tells us the guage of backup.
hwNoRollBackStartTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.3
message is reported when duplicating files starts from the master area
to the slave area in the board.
hwNoRollBackResultTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.4
message is reported when the duplication of a file from the active area to the
standby area is complete.
hwSaveStartTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.5
This trap message is reported when the data saving starts.
hwLoadTransferFileTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.6
This trap message is reported when the file transfer during loading is complete.
hwSaveCompleteTrap
.1.3.6.1.4.1.2011.6.6.8.1.0.7
This trap message is reported when the data saving is complete.
hwDuplicatingFileStartTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.1
message is reported when duplicating files starts from the master area
to the slave area in the board.
hwAutoBackupFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.10
This trap message is reported when the automatic backup fails.
hwAutoLoadStartTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.11
start of the board, if the board software version is different from the
board software version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade starts.
hwAutoLoadCompleteTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.12
start of the board, if the board software version is different from the board software
version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade is complete.
hwAutoLoadFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.13
start of the board, if the board software version is different from the board software version
configured in the system, the system upgrades the board program automatically. This trap message is reported
when the automatic upgrade fails.
hwAutoBackupSuccessTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.14
This trap is reported when a log or an alarm is automatically uploaded successfully.
hwLoadInStandbyChannelTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.15
This trap is reported the main channel of loading is invalid, load in standby channel.
hwAutoLoadBoardStartTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.16
start of the board, if the board software version is different from the
board software version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade starts.
hwAutoLoadBoardCompleteTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.17
start of the board, if the board software version is different from the board software
version configured in the system, the system upgrades the board program automatically.
This trap message is reported when the automatic upgrade is complete.
hwAutoLoadBoardFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.18
start of the board, if the board software version is different from the board software version
configured in the system, the system upgrades the board program automatically. This trap message is reported
when the automatic upgrade fails.
hwSaveFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.19
This trap message is reported when the auto data saving is failed.
hwDuplicatingFileSuccessTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.2
message is reported when duplicating files succeeded from the master area
to the slave area in the board.
hwSaveRecoverTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.20
This trap message is reported when the data saving is successful.
hwSoftwarePacketDeactiveTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.21
This trap message is reported when the device does not restart within 24 hours after the software package updates.
hwSoftwarePacketActiveTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.22
This trap message is reported when the device restarts.
hwVsAutoBackupSuccessTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.23
This trap is reported when a log or an alarm is automatically uploaded successfully.
hwVsAutoBackupFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.24
This trap message is reported when the automatic backup fails.
hwAutoBackupSuccessInetTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.25
This trap is reported when a log or an alarm is automatically uploaded successfully.
hwDuplicatingFileFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.3
message is reported when duplicating files failed from the master area
to the slave area in the board.
hwLoadStartTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.4
This trap message is reported when the loading operation starts.
hwLoadSuccessTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.5
This trap message is reported when the loading is successful.
hwLoadFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.6
This trap message is reported when the loading fails.
hwBackupStartTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.7
This trap message is reported when the backup starts.
hwBackupSuccessTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.8
This trap message is reported when the backup is successful.
hwBackupFailTrap
.1.3.6.1.4.1.2011.6.6.8.2.0.9
This trap message is reported when the backup fails.