hwOntUpdateStateAndProgress

HUAWEI-LOAD-BACKUP-MIB · .1.3.6.1.4.1.2011.6.6.1.7.1.6
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
ONT update state and load progress or load error num.
data structure: ONT IP + ONT update state + load progress/error num
---------------------------------------------------------------------------------------------------------
|  ONT NUM |  ONT IP  | ONT update  |  load progress  |  ONT IP  | ONT update  |  load progress  |  _   |
|   (2B)   |   (4B)   |  state (1B) |   /error num(4B |   (4B)   |  state (1B) |   /error num(4B |      |
---------------------------------------------------------------------------------------------------------
load progress: percent, such as 20%
error num:
Loading of the OLT fails(1): Loading the ont-packetfile from the DC to the OLT failed.
Loading of the ONT fails(2): Loading the ont-packetfile from the OLT to the ONT failed.
ONT version does not match(3): After the ONT reset, the ONT version does not match the target ONT version.
If the ONT loading is successful, the loading progress is displayed as 100%.
If the ONT loading fails, the related error code is returned to indicate the reason.

Context

MIB
HUAWEI-LOAD-BACKUP-MIB
OID
.1.3.6.1.4.1.2011.6.6.1.7.1.6
Type
column
Access
readonly
Status
current
Parent
hwAgentUpdateOntEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LOAD-BACKUP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LOAD-BACKUP-MIB::hwOntUpdateStateAndProgress'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'HUAWEI-LOAD-BACKUP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LOAD-BACKUP-MIB::hwOntUpdateStateAndProgress.<hwOntFrameIndex>.<hwOntSlotIndex>.<hwOntPortIndex>.<hwUpdateOntIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-LOAD-BACKUP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-LOAD-BACKUP-MIB::hwOntUpdateStateAndProgress'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255