hwFrameIndex
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.1.1.1
Object
column
Integer32
The index of a shelf in the device.
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwFrameEntry
- Table
- hwFrameTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1024
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwFrameResetTimeout Used to set the delay time of shelf reset, in unit of seconds.
When you set hwFrameResetTimeout, you also need to set hwFrameAdminStatus to reset(3) or resetwithoutloadeddata(9).
… | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.1.1.10 |
| hwFrameCLEICode Frame CLEI Code (COMMON LANGUAGE Location Identifier Code):
Used to identify the location and the type of a telecommunication device.
For the definition of the CLEI Code, refer to… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.11 |
| hwFrameTypeName Frame information description, to describe name information of the frame. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.12 |
| hwFrameExtendPort The extending port of main frame which is used to connect extended frame. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.13 |
| hwFrameUplinkPort The uplink port of extended frame. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.14 |
| hwFrameRackID Indicates the ID of the rack. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.1.1.15 |
| hwFrameExtendingSubId Sub ID of extending frame.
If extend type is ETH, sub ID is 0xffffffff, it is invalid.
If extend type is GPON, sub ID is ont ID, it is valid. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.16 |
| hwFrameExtendType The type of extended frame connecting to the main frame, its value is the same as the ifType of the extending port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.17 |
| hwFrameHardwareDesc Hardware description of frame. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.18 |
| hwFrameGponDeviceSn ONT serial number. The valid length of the serial number is 8, and 0 indicates that the node is not set. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.19 |
| hwFrameType The type of a shelf, which can be obtained from HUAWEI-TC-MIB.mib. | column | HUAWEI-TC-MIBHWFrameType | .1.3.6.1.4.1.2011.6.3.3.1.1.2 |
| hwFramePhySerialNum The vendor-specific serial number string for the physical entity.
The preferred value is the serial number string actually printed
on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.20 |
| hwFrameFanAlarm This MIB node is used to query the alarm status of the fan in the extended frame, which is represented by bits.
Functions of each bit are as follows:
1: faSupportQuery(0) - i… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.1.1.21 |
| hwFrameMacAddress The remote frame mac address, and its format is XX-XX-XX-XX-XX-XX.
For local frame, the value is invalid. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.22 |
| hwLpuSlotNums Number of LPUs supported by the device. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.1.1.23 |
| hwFrameCreateTime This object is used for getting the time of adding or creating a frame. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.3.3.1.1.25 |
| hwFrameDesc The description about the frame.
It is used to describe some extra information.
For convenient management, you can set the location of the room in
which the shelf is located as th… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.3 |
| hwSlots The number of physical slots in the shelf. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.4 |
| hwFrameOperStatus The operation status of frame.
Options:
1. normal(1) -indicates that the shelf is running normally
2. fault(2) -indicates that the shelf is faulty
3. other(3) -indicates t… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.1.1.5 |
| hwFrameAdminStatus The administration status of frame.
Options:
1. nooperation(-1) - default state of the system
2. disable(1) - indicates that the frame administration state is disable
3. en… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.1.1.6 |
| hwFrameQueryAssit The number of assist frame of this frame. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.1.1.65536 |
| hwFrameRowStatus The device that supports the slave shelf allows you to add a shelf (createAndGo(4))
and delete a shelf (destroy(6)) only.
The device that does not support the slave shelf and does… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.3.3.1.1.7 |
| hwBackplaneVersion Backplane board version information.
Use the new-line character \n (ACSII 0x0A)
to space various version information.
It mainly contains the following information:
Hardware PCB ve… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.8 |
| hwBackplanePhySerialNum The vendor-specific serial number string for the physical entity.
The preferred value is the serial number string actually printed
on the component itself. | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.1.1.9 |