hwLoadMode

Load protocol.
Options:
1.tftp(1)   -indicates that the Trivial File Transfer Protocol (TFTP) is used to perform
             the loading through the network port. Select tftp(1) when the transmission mode
             of the server is configured to TFTP. When TFTP is used for the loading, you need
             not enter the user name (hwLoadUserName) and password (hwLoadPassword).
2.modem(2)  -indicates that the XMODEM protocol is used to perform the loading through
             the serial port. When you use the HyperTerminal of the OS to perform serial
             port configuration on the server, select modem(2). Loading through the serial port
             does not require networking and maintenance through the command line interface
             does not require NM software.
3.ftp(3)    -indicates that the File Transfer Protocol (FTP) is used to perform loading
             through the network port. When the transmission mode of the server is configured to FTP,
             select ftp(3). When FTP is used for the loading, you need to enter the user name (hwLoadUserName)
             and password (hwLoadPassword).
4.smbLoadAnyBoards(4)-smbLoadAnyBoards.
5.sftp(5)   -indicates that the Secure File Transfer Protocol (SFTP) is used to perform the loading through
             the network port. Select sftp(5) when the transmission mode of the server is configured to SFTP.
             When SFTP is used for the loading, you need to enter the user name (hwLoadUserName)
             and password (hwLoadPassword). The instructions and data are encrypted during transmission.
6.other(255)-other.
The SFTP transmission mode is recommended.

MIB

HUAWEI-LOAD-BACKUP-MIB

OID

.1.3.6.1.4.1.2011.6.6.1.1.1.2

Type

column

Access

readwrite

Status

current

Parent

hwLoadParaEntry