hwStatusCollectMask

Collecting status mask.
Options:
1.cpu(0)                 -indicates that the CPU usage of the control board.
2.board(1)               -indicates that the running status of the board.
3.frame(2)               -indicates that the running status of the shelf.
4.temperature(3)         -indicates that the environmental temperature.
5.power(4)               -indicates that the status of the power supply.
6.fan(5)                 -indicates that the status of the fan monitoring objects.
7.upstreamport(6)        -indicates the status of the uplink port.
8.syncstatus(7)          -indicates the sync status.
9.esc(8)                 -indicates the Esc state.
10.lswport(9)            -indicates the Lsw ports status.
11.ap(10)                -indicates the the running status of the fault ap, return 100 logs at most.
12.h248mginterface(11)   -indicates the H248 MG interface status.
13.mgcpmginterface(12)   -indicates the MGCP MG interface status.
14.tcu(13)               -indicates the Tcu state.
15.uplinkporttraffic(14) -indicates the traffic on the uplink port.
16.onustatus(15)         -indicates the status of the ONU.
17.xpontraffic(16)       -indicates the traffic on the xPON port.
18.mxusnmpinfo(17)       -indicates the SNMP information about the MxU.
19.potsvoltage(18)       -indicates the voltage status of the pots board.
20.boardversion(19)      -indicates the version of the board.
21.gponProtectGroup(20)  -indicates the status of Gpon protect group.
22.linkAggregation(21)   -indicates the status of link aggregation.
23.serviceProcessBoardProtectGroup(22)    -indicates the status of ServiceProcessBoard protect group.
24.serviceProcessSPUBProtectGroup(23)     -indicates the status of ServiceProcessSPUB protect group.
25.numberOfConfigedServicePort(24)        -indicates the number of configed service-port.
From left to right, each bit indicates a status parameter.
If the bit is set to 1, it indicates collecting the corresponding status parameter.
If the bit is set to 0, it indicates ignoring the corresponding status parameter.
The value of the status parameter is the serial number of the bit.
For example, if only status parameters cpu, board, and fan need to be collected,
the mask value is 11000100 (binary), that is, 0xC4.

MIB

HUAWEI-LOAD-BACKUP-MIB

OID

.1.3.6.1.4.1.2011.6.6.5.3

Type

scalar

Access

readwrite

Status

current

Parent

hwStatusCollect