lost contact with one or more MEPs. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP loses contact with one or more other MEPs,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
hwDot1agCfmRMepMacAddress The MAC address of the remote faulty MEP
hwDot1agCfmRMepHighestPrDefect The fault in the highest level
hwDot1agCfmMdName The name of the faulty MD
hwDot1agCfmMdLevel The level of the faulty MD
hwDot1agCfmMaName The name of the faulty MA
hwDot3ahEfmNonThresholdRecovery
.1.3.6.1.4.1.2011.5.25.136.1.6.17
This object indicates that the non-threshold-crossing event is cleared.
hwTestMessageFailed
.1.3.6.1.4.1.2011.5.25.136.1.6.2
after tests are reported.
1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test is interrupted.
(through ctrl+c or mib)
hwCfmVlanOnewayDelay
.1.3.6.1.4.1.2011.5.25.136.1.6.23
This object indicates that the one-way delay exceeds the trap threshold in the VLAN networking.
hwCfmVlanOnewayDelayRecovery
.1.3.6.1.4.1.2011.5.25.136.1.6.24
This object indicates that the one-way delay falls below the trap threshold in the VLAN networking.
hwCfmVlanTwowayDelay
.1.3.6.1.4.1.2011.5.25.136.1.6.25
This object indicates that the two-way delay exceeds the trap threshold in the VLAN networking.
hwCfmVlanTwowayDelayRecovery
.1.3.6.1.4.1.2011.5.25.136.1.6.26
This object indicates that the two-way delay falls below the trap threshold in the VLAN networking.
hwDot3ahEfmLoopbackFailed
.1.3.6.1.4.1.2011.5.25.136.1.6.29
This object indicates that an hwDot3ahEfmLoopbackFailed notification is sent when loopback fails to start on an interface. This notification should not be sent more than once per second.
hwTestMessageCompleted
.1.3.6.1.4.1.2011.5.25.136.1.6.3
After the test is complete, report the results to the network management.
hwY1731AisDefectAlarm
.1.3.6.1.4.1.2011.5.25.136.1.6.30
This object indicates that the MEP receives an AIS PDU and enters the faulty state.
hwY1731AisDefectAlarmRecovery
.1.3.6.1.4.1.2011.5.25.136.1.6.31
This object indicates that the MEP does not receive an AIS PDU within the AIS PDU timeout period and exits the faulty state.
hwDot1agCfmUnexpectedMEGLevel
.1.3.6.1.4.1.2011.5.25.136.1.6.32
This object indicates that the MEP receives a CCM with an unexpected MEG level.
hwDot1agCfmUnexpectedMEGLevelCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.33
This object indicates that the MEP does not receive a CCM with an unexpected MEG level within the CCM timeout period.
hwDot1agCfmMismerge
.1.3.6.1.4.1.2011.5.25.136.1.6.34
This object indicates that the MEP receives a CCM carrying the correct MEG level but the incorrect MEG ID.
hwDot1agCfmMismergeCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.35
This object indicates that the MEP does not receive a CCM with an unexpected MEG ID within the CCM timeout period.
hwDot1agCfmUnexpectedMEP
.1.3.6.1.4.1.2011.5.25.136.1.6.36
This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, and unexpected MEP ID.
hwDot1agCfmUnexpectedMEPCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.37
This object indicates that the MEP does not receive a CCM with an unexpected MEP ID within the CCM timeout period.
hwDot1agCfmUnexpectedPeriod
.1.3.6.1.4.1.2011.5.25.136.1.6.38
This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, correct MEP ID, and unexpected period.
hwDot1agCfmUnexpectedPeriodCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.39
This object indicates that the MEP does not receive a CCM with an unexpected period within the CCM timeout period.
hwDot3ahEfmThresholdEvent
.1.3.6.1.4.1.2011.5.25.136.1.6.4
This object indicates that an hwDot3ahEfmThresholdEvent notification is sent when a local or remote threshold-crossing event is detected. A local threshold-crossing event is detected by the local entity, whereas a remote threshold-crossing event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a threshold event. This notification should not be sent more than once per second. The OAM entity can be obtained from the ifIndex in the variable bindings. The objects in the notification correspond to the values in a row instance of in the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events.
hwDot1agCfmUnexpectedMAC
.1.3.6.1.4.1.2011.5.25.136.1.6.40
This object indicates that the MEP receives a CCM with an unexpected MAC address.
hwDot1agCfmUnexpectedMACCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.41
This object indicates that the MEP does not receive a CCM with an unexpected MAC address within the CCM timeout period.
hwDot1agCfmLOC
.1.3.6.1.4.1.2011.5.25.136.1.6.42
This object indicates that the MEP does not receive any CCM from the RMEP within the CCM timeout period.
hwDot1agCfmLOCCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.43
This object indicates that the MEP receives n (n is greater than or equal to 3) CCMs from the RMEP (MEP ID = i) within the CCM timeout period.
hwDot1agCfmExceptionalMACStatus
.1.3.6.1.4.1.2011.5.25.136.1.6.44
This object indicates that the remote MEP is reporting an error status in its Port Status TLV or Interface Status TLV.
hwDot1agCfmExceptionalMACStatusCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.45
This object indicates that the remote MEP resumes from an error status indicated in its Port Status TLV or Interface Status TLV.
hwDot1agCfmRDI
.1.3.6.1.4.1.2011.5.25.136.1.6.46
This object indicates that the MEP receives a CCM with the RDI field set.
hwDot1agCfmRDICleared
.1.3.6.1.4.1.2011.5.25.136.1.6.47
This object indicates that the MEP receives a CCM with the RDI field cleared.
hwY1731AisExceedMaxPktNum
.1.3.6.1.4.1.2011.5.25.136.1.6.48
This object indicates that the number of packets sent or received in 1s exceeds the maximum value.
hwY1731AisExceedMaxPktNumCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.49
This object indicates that the number of packets sent or received in 1s falls below the maximum value.
hwDot3ahEfmNonThresholdEvent
.1.3.6.1.4.1.2011.5.25.136.1.6.5
This object indicates that an hwDot3ahEfmNonThresholdEvent notification is sent when a local or remote non-threshold-crossing event is detected. A local event is detected by the local entity, whereas a remote event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a non-threshold-crossing event. This notification should not be sent more than once per second. The OAM entity can be obtained from the ifIndex in the variable bindings. The objects in the notification correspond to the values in a row instance of the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events.
hwY1731LckDefect
.1.3.6.1.4.1.2011.5.25.136.1.6.50
This object indicates that the MEP enters the LCK faulty state.
hwY1731LckDefectCleared
.1.3.6.1.4.1.2011.5.25.136.1.6.51
This object indicates that the MEP exits from the LCK faulty state.
hwY1731Statistic
.1.3.6.1.4.1.2011.5.25.136.1.6.52
This object indicates that the Y.1731 statistic value exceeds the upper threshold.
hwY1731StatisticClear
.1.3.6.1.4.1.2011.5.25.136.1.6.53
This object indicates that the Y.1731 statistic value falls below the lower threshold.
hwY1731LckExceedThreshold
.1.3.6.1.4.1.2011.5.25.136.1.6.54
Indicates that the number of LCK packets transmitted in 1 second exceeds the upper limit.
hwY1731LckExceedThresholdRecovery
.1.3.6.1.4.1.2011.5.25.136.1.6.55
Indicates that the number of LCK packets transmitted in 1 second falls below the lower limit.
hwY1731TunnelNonSupport
.1.3.6.1.4.1.2011.5.25.136.1.6.56
This object indicates that Y.1731 does not support the current public tunnel.
hwY1731TunnelNonSupportResumed
.1.3.6.1.4.1.2011.5.25.136.1.6.57
This object indicates that the alarm that Y.1731 does not support the current public tunnel is cleared.
hwY1731TestIdStatistic
.1.3.6.1.4.1.2011.5.25.136.1.6.58
The Y.1731 statistic value exceeded the upper limit value of the threshold.
hwY1731TestIdStatisticClear
.1.3.6.1.4.1.2011.5.25.136.1.6.59
The Y.1731 statistic value fell below lower limit value of the threshold.
hwY1731PwTrunkNonSupport
.1.3.6.1.4.1.2011.5.25.136.1.6.60
This object indicates that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface.
hwY1731PwTrunkNonSupportResumed
.1.3.6.1.4.1.2011.5.25.136.1.6.61
This object indicates that The alarm that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface is cleared.
hwDot3ahEfmRemoteDyingGaspEvent
.1.3.6.1.4.1.2011.5.25.136.1.6.8
This object indicates that an hwDot3ahEfmRemoteDyingGaspEvent notification is sent when a remote Dying-Gasp event is detected. A remote event is detected through the reception of an Ethernet OAM Event Notification OAMPDU indicating a Dying-Gasp event.