HUAWEI-ETHOAM-MIB Table View

This table is used to create a Maintenance Domain (MD).
          
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.

hwDot1agCfmMdEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1

The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

hwDot1agCfmMdIndex

Column	Syntax	OID
hwDot1agCfmMdIndex This object indicates the index of the MD Table. hwDot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.1
hwDot1agCfmMdFormat This object indicates the format of the MD name. Options: 1. noMdName(1) -indicates that CCM packets have no maintenance domain name. 2. dns(2) -indicates that the maintenance domain name is CCM packets DNS nam…	Enumerationr/w Enumerated Values: 1 noMdName 2 dns 3 macAddress 4 string	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.2
hwDot1agCfmMdName This object indicates the name of the MD. The type/format of this object is determined by the value of the hwDot1agCfmMdFormat object. Each Maintenance Domain has unique name amongst all those used or ava…	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.3
hwDot1agCfmMdMdLevel This object indicates the level of the MD. The value ranges from 0 to 7. The greater the value, the higher the preference. By default, the value is 0.	HWDot1agCfmMDLevelr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.4
hwDot1agCfmMdMhfCreation This object indicates whether the management entity can create MIPs for the MD. Options: 1. defMHFnone(1) -indicates that the MIPs are not automatically created. 2. defMHFdefault(2) -indicates that the management e…	Enumerationr/w Enumerated Values: 1 defMHFnone 2 defMHFdefault 3 defMHFexplicit	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.5
hwDot1agCfmMdMhfIdPermission This object indicates what is to be included in the Sender ID TLV transmitted by MPs configured in the MD. Options: 1. sendIdNone(1) -indicates that the Sender ID TLV is not to be sent. 2. sendIdChassis(2) …	Enumerationr/w Enumerated Values: 1 sendIdNone 2 sendIdChassis 3 sendIdManage 4 sendIdChassisManage 5 sendIdDefer	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.6
hwDot1agCfmMdFormatName This object indicates the MD format name. The type/format of this object is determined by the value of the hwDot1agCfmMdFormatName object. Each Maintenance Domain has unique name amongst all those used or…	OctetStringr/w Constraints: range: 0-43	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.7
hwDot1agCfmMdRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.99

This table is used to create a Maintenance Association (MA).
Each row in the table represents an MA.
An MA is a set of MEPs, each configured with a single service instance.

hwDot1agCfmMaEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1

The MA table entry.

Indexes

hwDot1agCfmMdIndex hwDot1agCfmMaIndex

Column	Syntax	OID
hwDot1agCfmMaIndex This object indicates the index of the MA table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.1
hwDot1agCfmMaName This object indicates the name of the MA. This name MUST be unique within a maintenance domain.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.2
hwDot1agCfmMaMapType This object indicates what is associated with the MA. Options: 1. mapVlan(1) -indicates that a VLAN is associated with the current MA. 2. mapVsi(2) -indicates that a VSI is associated with the current MA. 3. mapL2vc(3)…	Enumerationr/w Enumerated Values: 1 mapVlan 2 mapVsi 3 mapL2vc 4 unbind 5 mapCcc	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.3
hwDot1agCfmMaMapVlanValue This object indicates the ID of the VLAN associated with the MA.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.4
hwDot1agCfmMaMapVsiName This object indicates the name of the VSI associated with the MA.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.5
hwDot1agCfmMaMapL2vcValue This object indicates the ID of the L2VC associated with the MA.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.6
hwDot1agCfmMaMapL2vcType This object indicates the encapsulation type of the L2VC associated with the MA. Options: 1. invalid(1) -invalid: indicates that no display shows that the L2VC is associated with the current MA. 2. l…	Enumerationr/w Enumerated Values: 1 invalid 2 l2vcRaw 3 l2vcTagged	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.7
hwDot1agCfmMaPktPriority This object indicates the priority of the 802.1ag packet sent in the MA. The value ranges from 0 to 7. The greater the value is, the higher the priority is. By default, the value is 7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.8
hwDot1agCfmMaCcmInterval This object indicates the interval for an MEP in the MA to send or probe CCMs. Options: 1. interval10ms(1) -10 milliseconds 2. interval20ms(2) -20 milliseconds 3. interval30ms(3) -30 milliseconds 4. interval50…	Enumerationr/w Enumerated Values: 1 interval10ms 2 interval20ms 3 interval30ms 4 interval50ms 5 interval100ms 6 interval1s 7 interval10s 8 interval3Dot3ms 9 interval1min 10 interval10min	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.9
hwDot1agCfmMaRmepActiveTime This object indicates the time period after which RMEP configurations are to be activated. The value ranges from 0 to 600 in seconds. By default, the value is 0.	Integer32r/w Constraints: range: 0-600	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.10
hwDot1agCfmMaMepFngAlarmTime This object indicates the delay for the RMEP to send trap messages. The value must be an integer multiple of 500, for example, 500, 1000, or 1500. The value ranges from 0 to 30000 in milliseconds. By default, the value …	Integer32r/w Constraints: range: 0-30000	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.11
hwDot1agCfmMaMepFngResetTime This object indicates the delay for the RMEP to send alarm clearance messages after the fault is rectified. The value must be an integer multiple of 500, for example, 500, 1000, or 1500. The value ranges from 0 to 30000…	Integer32r/w Constraints: range: 0-30000	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.12
hwDot1agCfmMaFormat This object indicates the format of the MA name. Options: 1. string(2) -indicates that the format of the MA name is string. 2. iccBased(32) -indicates that the format of the MA name is ICC-based. By default, the valu…	Enumerationr/w Enumerated Values: 2 string 32 iccBased	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.13
hwDot1agCfmMaFormatName This object indicates the MA format name. The type/format of this object is determined by the value of the hwDot1agCfmMaFormatName object.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.14
hwDot1agCfmMaMapCccName This object indicates the name of the CCC associated with the MA.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.15
hwDot1agCfmMaRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.99

This table is used to create a Maintenance Association End Point (MEP).

hwDot1agCfmMepEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1

The MEP table entry.

Indexes

hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier

Column	Syntax	OID
hwDot1agCfmMepIdentifier This object indicates the ID of the MEP. Integer that is unique among all the MEPs in the same MA. MEP Identifier is also known as the MEPID. The value ranges from 1 to 8191.	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.1
hwDot1agCfmMepIsVlanType This object indicates whether the MEP in the MA is a VLAN-based MEP. If the MEP is a VLAN-based MEP, the MA must have been associated with a VLAN and the interface and VLAN information need not be configured. If the MEP…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.2
hwDot1agCfmMepIfIndex This object indicates the interface to which the MEP is bound. The interface is either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. By default, the value of IfIndex…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.3
hwDot1agCfmMepDot1qVlan This object indicates the VLAN to which the interface that the MEP is bound to belong.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.4
hwDot1agCfmMepPeVlan This object indicates the QinQ PE VLAN bound to the MEP.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.5
hwDot1agCfmMepCeVlan This object indicates the QinQ CE VLAN bound to the MEP.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.6
hwDot1agCfmMepDirection This object indicates the direction in which the MEP sends the 802.1ag protocol packets. Options: 1. invalid(1) -indicates the invalid value. 2. dirInward(2) -indicates that the 802.1ag protocol packets sent by an …	Enumerationr/w Enumerated Values: 1 invalid 2 dirInward 3 dirOutward	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.7
hwDot1agCfmMepCcmSendEnabled This object indicates whether CCM sending is enabled on the MEP in an MA. The value of this object can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.8
hwDot1agCfmMepMacAddress This object indicates the MAC address of an MEP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.9
hwDot1agCfmMepRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.99

This table is used to create a Remote Maintenance Association End Point (RMEP).

hwDot1agCfmRMepEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1

The remote MEP table entity.

Indexes

hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmRMepIdentifier

Column	Syntax	OID
hwDot1agCfmRMepIdentifier This object indicates the ID of the RMEP. The value ranges from 1 to 8191.	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.1
hwDot1agCfmRMepMacAddress This object indicates the MAC address of the interface the RMEP resides.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.2
hwDot1agCfmRMepCcmRecvEnabled This object indicates whether CCM receiving is enabled on the current device. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.3
hwDot1agCfmRMepStateIsUp This object indicates the CFM status. Options: 1. up(1) -indicates that the CFM status is Up. 2. down(2) -indicates that the CFM status is Down. 3. invalid(3) -indicates that the CFM status is not enabled.	Enumeration Enumerated Values: 1 up 2 down 3 invalid	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.4
hwDot1agCfmRMepHighestPrDefect This object indicates the severity level of the fault on an RMEP. If the CFM status is Up, this object is displayed as none.	HWDot1agCfmHighestDefectPri Type Values: 0 none 1 defRDICCM 2 defMACstatus 3 defRemoteCCM 4 defErrorCCM 5 defXconCCM	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.5
hwDot1agCfmRMepRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.6.1.1.99

This table is used to display information about a Maintenance
Association Intermediate Point (MIP).

hwDot1agCfmMipEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1

The MIP table entry.

Indexes

hwDot1agCfmMipIfIndex

Column	Syntax	OID
hwDot1agCfmMipIfIndex This object indicates the interface on which the MIP resides.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.1
hwDot1agCfmMipLevel This object indicates the level of the MIP. The value ranges from 0 to 7.	HWDot1agCfmMDLevel Type Constraints: range: 0..7	.1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.2
hwDot1agCfmMipIfMacAddress This object indicates the MAC address of the interface on which the MIP resides.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.7.1.1.3

The entries related to the Mac Ping include the parameters input
by users and the returned results.

hwDot1agCfmMacPingEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1

This table is used to configure the MAC ping function.

Indexes

hwDot1agCfmMacPingIndex

Column	Syntax	OID
hwDot1agCfmMacPingIndex This object indicates the index of this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.1
hwDot1agCfmMacPingState This object indicates whether the MAC ping function is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.2
hwDot1agCfmMacPingMdName This object indicates the name of the MD where MAC ping is performed.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.3
hwDot1agCfmMacPingMaName This object indicates the name of the MA where MAC ping is performed.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.4
hwDot1agCfmMacPingMepId This object indicates the ID of the local MEP of the 802.1ag MAC ping operation. The value ranges from 1 to 8191. By default, the value is 0.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.5
hwDot1agCfmMacPingDestIsMepId This object indicates whether the destination MAC address of the LBM is the MAC address of the interface on which the RMEP resides.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.6
hwDot1agCfmMacPingDestMepId This object indicates the ID of the destination RMEP of the 802.1ag MAC ping operation. The value ranges from 1 to 8191. By default, the value is 0.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.7
hwDot1agCfmMacPingMacAddress This object indicates the destination MAC address of the LBM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.8
hwDot1agCfmMacPingOutIfIndex This object indicates the outbound interface that sends the LBM.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.9
hwDot1agCfmMacPingTimeOut This object indicates the timeout period for waiting for the LBR. The value ranges from 1 to 65535 in milliseconds. By default, the value is 2000.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.10
hwDot1agCfmMacPingCount This object indicates the number of ping operation times. The value ranges from 1 to 4294967295. By default, the value is 5.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.11
hwDot1agCfmMacPingPacketSize This object indicates the length of the LBM. The value ranges from 64 to 9500. By default, the value is 95.	Integer32r/w Constraints: range: 64-9500	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.12
hwDot1agCfmMacPingPriority This object indicates the priority of the sent LBM packet. The value ranges from 0 to 7 or can be 255. The value 255 is an invalid value. If the value is set to 255, this value should be identical with the priority valu…	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.13
hwDot1agCfmMacPingSendPacketNum This object indicates the number of sent LBMs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.14
hwDot1agCfmMacPingRecvPacketNum This object indicates the number of received LBRs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.15
hwDot1agCfmMacPingPacketLossRatio This object indicates the frame loss ratio on the physical link. The value ranges from 0 to 100.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.16
hwDot1agCfmMacPingRecvTimeDelayMin This object indicates the minimum delay in receiving the LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.17
hwDot1agCfmMacPingRecvTimeDelayMax This object indicates the maximum delay in receiving the LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.18
hwDot1agCfmMacPingRecvTimeDelayAvg This object indicates the average delay in receiving the LBM.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.19
hwDot1agCfmMacPingRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.8.1.1.99

This table is used to configure the MAC trace function.

hwDot1agCfmMacTraceEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1

Indicates the MAC Trace table entry.

Indexes

hwDot1agCfmMacTraceIndex

Column	Syntax	OID
hwDot1agCfmMacTraceIndex This object indicates the index of this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.1
hwDot1agCfmMacTraceState This object indicates whether the MAC trace function is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.2
hwDot1agCfmMacTraceMdName This object indicates the name of the MD where MAC trace is performed.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.3
hwDot1agCfmMacTraceMaName This object indicates the name of the MA where MAC trace is performed.	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.4
hwDot1agCfmMacTraceMepId This object indicates the ID of the local MEP of the 802.1ag MAC trace operation. The value ranges from 1 to 8191. By default, the value is 0.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.5
hwDot1agCfmMacTraceDestIsMepId This object indicates whether the destination MAC address of the LTM is the MAC address of the interface on which the RMEP resides.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.6
hwDot1agCfmMacTraceDestMepId This object indicates the ID of the destination RMEP of the 802.1ag MAC trace operation. The value ranges from 1 to 8191. By default, the value is 0.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.7
hwDot1agCfmMacTraceMacAddress This object indicates the destination MAC address of the LTM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.8
hwDot1agCfmMacTraceOutIfIndex This object indicates the outbound interface that sends the LTM.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.9
hwDot1agCfmMacTraceTimeOut This object indicates the timeout period for waiting for the LTR. The value ranges from 1 to 65535, in milliseconds. By default, the value is 2000.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.10
hwDot1agCfmMacTraceTTL This object indicates the TTL value of the 802.1ag MAC trace operation. The value ranges from 1 to 255. By default, the value is 64.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.11
hwDot1agCfmMacTraceSendSeqNumber This object indicates the sequence number of the sent LTR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.12
hwDot1agCfmMacTraceResult This object indicates the result of the MAC trace operation. Options: 1. invalid(1) -indicates that the MAC trace operation is invalid. 2. successful(2) -indicates that the MAC trace operation succeeds. 3. failed(3) …	Enumeration Enumerated Values: 1 invalid 2 successful 3 failed	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.13
hwDot1agCfmMacTraceRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.9.1.1.99

This table is used to display information about the LTR for responding
to the MAC trace operation.

hwDot1agCfmMacTraceReplyEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1

The Mac Trace result table entry.

Indexes

hwDot1agCfmMacTraceReplySeqNumber hwDot1agCfmMacTraceReplyRecvOrder

Column	Syntax	OID
hwDot1agCfmMacTraceReplySeqNumber This object indicates the index of this table. The value is the sequence number of the LTR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.1
hwDot1agCfmMacTraceReplyRecvOrder This object indicates the index of this table. The value is the sequence in which the MAC trace results are displayed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.2
hwDot1agCfmMacTraceReplyTTL This object indicates the TTL of the LTR. The value ranges from 0 to 255.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.3
hwDot1agCfmMacTraceReplyForwarded This object indicates whether the device that sends the LTR keeps on forwarding LTMs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.4
hwDot1agCfmMacTraceReplyTerminalMep This object indicates whether the LTR is sent by an MEP.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.5
hwDot1agCfmMacTraceReplyRelayAction This object indicates the value of the Relay Action field in the LTR.	HWDot1agCfmRelayActionFieldValue Type Values: 1 rlyHit 2 rlyFdb 3 rlyMpdb 255 rlyInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.6
hwDot1agCfmMacTraceReplyIngressAction This object indicates the value of the Ingress Action field in the LTR.	HWDot1agCfmIngressActionFieldValue Type Values: 1 ingOk 2 ingDown 3 ingBlocked 4 ingVid 255 ingInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.7
hwDot1agCfmMacTraceReplyIngressMac This object indicates the physical MAC address carried in the ingress MAC address field in the LTR.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.8
hwDot1agCfmMacTraceReplyIngressIfName This object indicates the name of the inbound interface of the LTR.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.9
hwDot1agCfmMacTraceReplyEgressAction This object indicates the value of the Egress Action field in the LTR.	HWDot1agCfmEgressActionFieldValue Type Values: 1 egrOK 2 egrDown 3 egrBlocked 4 egrVid 255 egrInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.10
hwDot1agCfmMacTraceReplyEgressMac This object indicates the physical MAC address carried in the egress MAC address field in the LTR.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.11
hwDot1agCfmMacTraceReplyEgressIfName This object indicates the name of the interface that forwards the LTR.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.1.9.2.1.12

This table is used to get the index of the Maintenance Domain table.

hwDot1agCfmQueryMdIndexEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1

The Md Index table entry.

Indexes

hwDot1agCfmQueryMdName

Column	Syntax	OID
hwDot1agCfmQueryMdName This object indicates the name of the Maintenance Domain.	OctetString Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.1
hwDot1agCfmQueryMdIndex This object indicates the index to the Maintenance Domain table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.10.1.1.2

This table is used to get the index of the Maintenance Association table.

hwDot1agCfmQueryMaIndexEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1

The Ma Index table entry.

Indexes

hwDot1agCfmQueryMdName hwDot1agCfmQueryMaName

Column	Syntax	OID
hwDot1agCfmQueryMaName This object indicates the name of Maintenance Association.	OctetString Constraints: range: 1-43	.1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.1
hwDot1agCfmQueryMaIndex This object indicates the index to the Maintenance Association table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.10.2.1.2

This table is used to configure the GMAC trace function.

hwDot1agCfmGmacTraceEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1

Indicates the GMAC Trace table entry.

Indexes

hwDot1agCfmGmacTraceIndex

Column	Syntax	OID
hwDot1agCfmGmacTraceIndex This object indicates the index of this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.1
hwDot1agCfmGmacTraceState This object indicates whether the GMAC trace function is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.2
hwDot1agCfmGmacTraceMacAddress This object indicates the destination MAC address of the LTM.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.3
hwDot1agCfmGmacTraceServiceType This object indicates the service type associated with the gmac trace. Options: 1. vlan(1) -indicates that a VLAN is associated with the gmac trace. 2. invalid(255) -indicates that no service type is specified for …	Enumerationr/w Enumerated Values: 1 vlan 255 invalid	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.4
hwDot1agCfmGmacTraceVlanValue This object indicates the VLAN to the destination MAC address.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.5
hwDot1agCfmGmacTraceVsiName This object indicates the name of the VSI associated with the GMAC trace.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.6
hwDot1agCfmGmacTraceL2vcValue This object indicates the ID of the L2VC associated with the GMAC trace.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.7
hwDot1agCfmGmacTraceL2vcType This object indicates the encapsulation type of the L2VC associated with the gmac trace. Options: 1. invalid(1) -indicates that no display shows that the L2VC is associated with the current gmac trac…	Enumerationr/w Enumerated Values: 1 invalid 2 l2vcRaw 3 l2vcTagged	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.8
hwDot1agCfmGmacTraceDot1qVlan This object indicates the DOT1Q VLAN ID to the destination MAC address.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.9
hwDot1agCfmGmacTracePeVlan This object indicates the QinQ PE VLAN bound to the GMAC trace.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.10
hwDot1agCfmGmacTraceCeVlan This object indicates the QinQ CE VLAN bound to the GMAC trace.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.11
hwDot1agCfmGmacTraceOutIfIndex This object indicates the outbound interface that sends the LTM.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.12
hwDot1agCfmGmacTraceTimeOut This object indicates the timeout period for waiting for the LTR. The value ranges from 1 to 65535, in milliseconds. By default, the value is 2000.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.13
hwDot1agCfmGmacTraceDisplayHostInfo This object indicates whether the LTR include host information.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.14
hwDot1agCfmGmacTraceSendSeqNumber This object indicates the sequence number of the sent LTR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.15
hwDot1agCfmGmacTraceResult This object indicates the result of the GMAC trace operation. Options: 1. invalid(1) -indicates that the GMAC trace operation is invalid. 2. successful(2) -indicates that the GMAC trace operation succeeds. 3. failed(…	Enumeration Enumerated Values: 1 invalid 2 successful 3 failed	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.16
hwDot1agCfmGmacTraceRowStatus This object indicates the row status of this table. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.1.11.2.1.99

This table is used to display information about the LTR for responding
to the GMAC trace operation.

hwDot1agCfmGmacTraceReplyEntry row .1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1

The GMAC Trace result table entry.

Indexes

hwDot1agCfmGmacTraceReplySeqNumber hwDot1agCfmGmacTraceReplyRecvOrder

Column	Syntax	OID
hwDot1agCfmGmacTraceReplySeqNumber This object indicates the index of this table. The value is the sequence number of the LTR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.1
hwDot1agCfmGmacTraceReplyRecvOrder This object indicates the index of this table. The value is the sequence in which the GMAC trace results are displayed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.2
hwDot1agCfmGmacTraceReplyTTL This object indicates the TTL of the LTR. The value ranges from 0 to 255.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.3
hwDot1agCfmGmacTraceReplyForwarded This object indicates whether the device that sends the LTR keeps on forwarding LTMs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.4
hwDot1agCfmGmacTraceReplyHostInfo This object indicates the host name and IP address of each hop.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.5
hwDot1agCfmGmacTraceReplyRelayAction This object indicates the value of the Relay Action field in the LTR.	HWDot1agCfmRelayActionFieldValue Type Values: 1 rlyHit 2 rlyFdb 3 rlyMpdb 255 rlyInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.6
hwDot1agCfmGmacTraceReplyIngressAction This object indicates the value of the Ingress Action field in the LTR.	HWDot1agCfmIngressActionFieldValue Type Values: 1 ingOk 2 ingDown 3 ingBlocked 4 ingVid 255 ingInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.7
hwDot1agCfmGmacTraceReplyIngressMac This object indicates the physical MAC address carried in the ingress MAC address field in the LTR.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.8
hwDot1agCfmGmacTraceReplyIngressIfName This object indicates the name of the inbound interface of the LTR.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.9
hwDot1agCfmGmacTraceReplyEgressAction This object indicates the value of the Egress Action field in the LTR.	HWDot1agCfmEgressActionFieldValue Type Values: 1 egrOK 2 egrDown 3 egrBlocked 4 egrVid 255 egrInvalid	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.10
hwDot1agCfmGmacTraceReplyEgressMac This object indicates the physical MAC address carried in the egress MAC address field in the LTR.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.11
hwDot1agCfmGmacTraceReplyEgressIfName This object indicates the name of the interface that forwards the LTR.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.1.11.3.1.12

Set the detection mode table in the last one kilometer on the interface.

hwDot3ahEfmDetectModeEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1

Set the detection mode entity in the last one kilometer on the interface.

Indexes

No indexes recorded

Column	Syntax	OID
hwDot3ahEfmDetectMode Detection mode ( fast detection and standard detection)	HWDetectTyper/w Type Values: 1 normalDetect 2 fastDetect	.1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.11
hwDot3ahEfmDetectInterval Time interval of detection	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.12
hwDot3ahEfmDetectMalfunction Failure description from 802.3ah and from associated modules.	Integer32 Constraints: range: 0-768	.1.3.6.1.4.1.2011.5.25.136.1.2.2.1.1.13

This table contains the primary controls and status for the
OAM capabilities of an Ethernet like interface.  There will be
one row in this table for each Ethernet like interface in the
system that supports the OAM functions defined in [802.3ah].

hwDot3ahEfmEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1

An entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. Entries in
the table are created automatically for each interface
supporting Ethernet OAM. The status of t…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmAdminState This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The hwDot3ahEfmAdminState always starts in the…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1
hwDot3ahEfmOperStatus At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. Options: 1. disabled(1) -indicates th…	Enumeration Enumerated Values: 1 disabled 2 linkFault 3 passiveWait 4 activeSendLocal 5 sendLocalAndRemote 6 sendLocalAndRemoteOk 7 oamPeeringLocallyRejected 8 oamPeeringRemotelyRejected 9 operational 10 nonOperHalfDuplex	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.2
hwDot3ahEfmMode This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. Options: 1. active(1) -indicates that OAM on Ethernet interfaces…	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.3
hwDot3ahEfmMaxOamPduSize The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local impl…	octetsUnsigned32 Constraints: range: 64-1518	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.4
hwDot3ahEfmConfigRevision The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate configuration changes have occurred which might require the…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.5
hwDot3ahEfmFunctionsSupported The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently …	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.6
hwDot3ahEfmTimeout The EFM Timeout object defines the max time that the EFM session stays in detect mode since the last OAMPDU received. if there's no OAMPDU received within the time the timeout value defines, the EFM session will turn i…	millisecondsUnsigned32r/w Constraints: range: 300-30000	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.7
hwDot3ahEfmInterval The EFM interval object defines the interval of sending OAM PDUs. The value of EFM interval should be the same as the value of the peer interface. The interval value must be an exact integ…	millisecondsUnsigned32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.8

This table contains information about the OAM peer for a
particular Ethernet like interface. OAM entities communicate
with a single OAM peer entity on Ethernet links on which OAM
is enabled and operating properly.  There is one entry in this
table for each entry in the hwDot3ahEfmTable for which information
on the peer OAM entity is available.

hwDot3ahEfmPeerEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1

An entry in the table, containing information on the peer OAM
entity for a single Ethernet like interface.

Note that there is at most one OAM peer for each Ethernet like
interface. Entries are automaticall…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmPeerMacAddress The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU.	OctetString	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.1
hwDot3ahEfmPeerVendorOui The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to zero befor…	HWDot3Oui Type Constraints: range: 3	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.2
hwDot3ahEfmPeerVendorInfo The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additi…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.3
hwDot3ahEfmPeerMode The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last…	Enumeration Enumerated Values: 1 active 2 passive 3 unknown	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.4
hwDot3ahEfmPeerMaxOamPduSize The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The max…	octetsUnsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.5
hwDot3ahEfmPeerConfigRevision The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. The configuration revis…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.6
hwDot3ahEfmPeerFunctionsSupported The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to t…	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7

This table contains controls for the loopback state of the
local link as well as indicating the status of the loopback
function.  There is one entry in this table for each entry in
hwDot3ahEfmTable that supports loopback functionality (where
hwDot3ahEfmFunctionsSupported includes the loopbackSupport bit
set).
          
Loopback can be used to place the remote OAM entity in a state
where every received frame (except OAMPDUs) is echoed back
over the same interface on which they were received.   In this
state, at the remote entity, 'normal' traffic is disabled as
only the looped back frames are transmitted on the interface.
Loopback is thus an intrusive operation that prohibits normal
data flow and should be used accordingly.

hwDot3ahEfmLoopbackEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1

An entry in the table, containing information on the loopback
status for a single Ethernet like interface. Entries in the
table are automatically created whenever the local OAM entity
supports loopback capabilities. T…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmLoopbackStatus The loopback status of the OAM entity. When operating in normal mode with no loopback in progress, the status reads noLoopback(1). The values initiatingLooopback(2) and terminatingLoopback(4) can be read or written. Th…	Enumerationr/w Enumerated Values: 1 noLoopback 2 initiatingLoopback 3 remoteLoopback 4 terminatingLoopback 5 localLoopback 6 unknown	.1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.1
hwDot3ahEfmLoopbackIgnoreRx Since OAM loopback is a disruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. Options: 1. igno…	Enumerationr/w Enumerated Values: 1 ignore 2 process	.1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.2
hwDot3ahEfmLoopbackTimeout This object specifies the timeout period for a remote loopback. The value ranges from 0 to 1000 in minutes. The default value is 20 minutes. 0 indicates that no timeout period is set.	minutesUnsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.136.1.2.2.4.1.3

This table contains statistics for the OAM function on a
particular Ethernet like interface. There is an entry in the
table for every entry in the hwDot3ahEfmTable.
          
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah].  Given the OAM
protocol is a slow protocol, the counters increment at a slow
rate.

hwDot3ahEfmStatsEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1

An entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. Entries are automatically created for every entry
in the hwDot3ahEfmTable. Counters are maint…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmInformationTx A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.1
hwDot3ahEfmInformationRx A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the val…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.2
hwDot3ahEfmUniqueEventNotificationTx A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame m…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.3
hwDot3ahEfmUniqueEventNotificationRx A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a fra…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.4
hwDot3ahEfmDuplicateEventNotificationTx A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.5
hwDot3ahEfmDuplicateEventNotificationRx A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.6
hwDot3ahEfmLoopbackControlTx A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.7
hwDot3ahEfmLoopbackControlRx A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by th…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.8
hwDot3ahEfmVariableRequestTx A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.9
hwDot3ahEfmVariableRequestRx A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by th…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.10
hwDot3ahEfmVariableResponseTx A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated b…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.11
hwDot3ahEfmVariableResponseRx A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by t…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.12
hwDot3ahEfmOrgSpecificTx A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicat…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.13
hwDot3ahEfmOrgSpecificRx A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.14
hwDot3ahEfmUnsupportedCodesTx A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as i…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.15
hwDot3ahEfmUnsupportedCodesRx A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indi…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.16
hwDot3ahEfmFramesLostDueToOam A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contenti…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.5.1.17

Ethernet OAM includes the ability to generate and receive
Event Notification OAMPDUs to indicate various link problems.
This table contains the mechanisms to enable Event
Notifications and configure the thresholds to generate the
standard Ethernet OAM events.  There is one entry in the table
for every entry in hwDot3ahEfmTable that supports OAM events
(where hwDot3ahEfmFunctionsSupported includes the eventSupport
bit set). The values in the table are maintained across
changes to hwDot3ahEfmOperStatus.
          
The standard threshold crossing events are:
  - Errored Symbol Period Event.  Generated when the number of
    symbol errors exceeds a threshold within a given window
    defined by a number of symbols (for example, 1,000 symbols
    out of 1,000,000 had errors).
  - Errored Frame Period Event.  Generated when the number of
    frame errors exceeds a threshold within a given window
    defined by a number of frames (for example, 10 frames out
    of 1000 had errors).
  - Errored Frame Event.  Generated when the number of frame
    errors exceeds a threshold within a given window defined
    by a period of time (for example, 10 frames in 1 second
    had errors).
  - Errored Frame Seconds Summary Event.  Generated when the
    number of errored frame seconds exceeds a threshold within
    a given time period (for example, 10 errored frame seconds
    within the last 100 seconds).  An errored frame second is
    defined as a 1 second interval which had >0 frame errors.
There are other events (dying gasp, critical events) that are
not threshold crossing events but which can be
enabled/disabled via this table.

hwDot3ahEfmEventConfigEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1

Entries are automatically created and deleted from this
table, and exist whenever the OAM entity supports Ethernet OAM
events (as indicated by the eventSupport bit in
hwDot3ahEfmFunctionsSuppported). Values in the tabl…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmErrSymPeriodWindowHi The two objects hwDot3ahEfmErrSymPeriodWindowHi and hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is define…	2^32 symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.1
hwDot3ahEfmErrSymPeriodWindowLo The two objects hwDot3ahEfmErrSymPeriodWindowHi and hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is define…	symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.2
hwDot3ahEfmErrSymPeriodThresholdHi The two objects hwDot3ahEfmErrSymPeriodThresholdHi and hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause …	2^32 symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.3
hwDot3ahEfmErrSymPeriodThresholdLo The two objects hwDot3ahEfmErrSymPeriodThresholdHi and hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause …	symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.4
hwDot3ahEfmErrSymPeriodEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.5
hwDot3ahEfmErrFramePeriodWindow The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received over the physical layer in one second. If hwDot…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.6
hwDot3ahEfmErrFramePeriodThreshold The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of ev…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.7
hwDot3ahEfmErrFramePeriodEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.8
hwDot3ahEfmErrFrameWindow The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If hwDot3ahEfmErrFrameThreshold frame errors occur within a window of hwDot3ahEfmErrFrame…	tenths of a secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.9
hwDot3ahEfmErrFrameThreshold The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of eve…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.10
hwDot3ahEfmErrFrameEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.11
hwDot3ahEfmErrFrameSecsSummaryWindow The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 600 (60 seconds). If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur within a window of hwDot3…	tenths of a secondInteger32r/w Constraints: range: 100-9000	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.12
hwDot3ahEfmErrFrameSecsSummaryThreshold The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically …	errored frame secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.13
hwDot3ahEfmErrFrameSecsEvNotifEnable If true, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs. By default, this object should have the value true for Ethernet like interfaces that supp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.14
hwDot3ahEfmDyingGaspEnable If true, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags field to its peer OAM entity when a dying gasp event occurs. The exact definition of a dying gasp event is implementation depen…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.15
hwDot3ahEfmCriticalEventEnable If true, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs. The exact definition of a critical event is implementation dependent.…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.16
hwDot3ahEfmThresholdTriggerErrDown This object indicates whether threshold event will trigger error-shutdown. If it is enabled(1), after EFM checks that the threshold event happens, the current interface will be set to administrative down. …	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.17
hwDot3ahEfmNonThresholdCriticalEventTriggerErrDown This object indicates whether non-threshold critical event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold critical event happens, the current interface will be set to administr…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.18
hwDot3ahEfmNonThresholdDyinggaspTriggerErrDown This object indicates whether non-threshold dying gasp event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold dying gasp event happens, the current interface will be set to admin…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.19
hwDot3ahEfmNonThresholdLinkFaultTriggerErrDown This object indicates whether non-threshold link fault event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold link fault event happens, the current interface will be set to admin…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.20
hwDot3ahEfmNonThresholdTimeoutTriggerErrDown This object indicates whether non-threshold time out event will trigger error-shutdown. If it is enabled(1), after EFM checks that the non-threshold time out event happens, the current interface will be set to administr…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.6.1.21

This table records a history of the events that have occurred
at the Ethernet OAM level.  These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM.  Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU.
          
This table contains both threshold crossing events and
non-threshold crossing events.  The parameters for the
threshold window, threshold value, and actual value
(hwDot3ahEfmEventLogWindowXX, hwDot3ahEfmEventLogThresholdXX,
hwDot3ahEfmEventLogValue) are only applicable to threshold
crossing events, and are returned as all F's (2^32 - 1) for
non-threshold crossing events.
Entries in the table are automatically created when such
events are detected.  The size of the table is implementation
dependent.  When the table reaches its maximum size, older
entries are automatically deleted to make room for newer
entries.

hwDot3ahEfmEventLogEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1

An entry in the hwDot3ahEfmEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicati…

Indexes

IF-MIBifIndex hwDot3ahEfmEventLogIndex

Column	Syntax	OID
hwDot3ahEfmEventLogIndex An arbitrary integer for identifying individual events within the event log.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.1
hwDot3ahEfmEventLogTimestamp The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated events, the time of the event is indicated…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.2
hwDot3ahEfmEventLogOui The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining th…	HWDot3Oui Type Constraints: range: 3	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.3
hwDot3ahEfmEventLogType The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFrameEvent(2), …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.4
hwDot3ahEfmEventLogLocation Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)). Options: 1. local(1) -indicates that an EfmEvent occurred locally. 2. remote(2) -indicates that an EfmEven…	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.5
hwDot3ahEfmEventLogWindowHi If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the thr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.6
hwDot3ahEfmEventLogWindowLo If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the thr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.7
hwDot3ahEfmEventLogThresholdHi If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold cross…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.8
hwDot3ahEfmEventLogThresholdLo If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold cross…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.9
hwDot3ahEfmEventLogValue If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (for example, 11, when 11 occurrences happened in 5 seconds while the…	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.10
hwDot3ahEfmEventLogRunningTotal Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing eve…	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.11
hwDot3ahEfmEventLogEventTotal Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing eve…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.2.2.7.1.12

This table contains configurations of binding relationships
between EFM and other modules.

hwDot3ahEfmManagerEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1

This entry contains configurations of binding relationships
between EFM and other modules.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEfmTriggerIfDown This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface link state will be set to block (EFM down),and all the data exce…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.1
hwDot3ahEfmHoldUpTime This object specifies the time elapsed an EFM interface is in the faulty state. The value ranges from 0 to 50 in seconds. The default value is 0.	Integer32r/w Constraints: range: 0-50	.1.3.6.1.4.1.2011.5.25.136.1.2.2.8.1.2

This table contains information about the OAM Evrrp project for
a particular Ethernet like interface.

hwDot3ahEvrrpEntry row .1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1

An entry in the table of hwDot3ahEvrrpTable, containing information on
the OAM Evrrp entity for a single Ethernet like interface.

Note that there is at most one OAM Evrrp for each Ethernet like
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwDot3ahEvrrpCpuState This object indicates the state in the OAMPDU which sended by the peer interface. Options: 1. master(1) -If it is master(1), EFM will make the link work as the master state. 2. slave(2) -if it is slave(2), EFM will m…	Enumeration Enumerated Values: 1 master 2 slave 3 unknown	.1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.1
hwDot3ahEvrrpTriggerIfDownobsolete This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface link state will be set to EFM down. And all of the PDU operation…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.2
hwDot3ahEvrrpHoldUpTimeobsolete This object specifies the time elapsed an EFM interface is in the faulty state. The value ranges from 0 to 50 in seconds. The default value is 0.	Integer32r/w Constraints: range: 0-50	.1.3.6.1.4.1.2011.5.25.136.1.2.2.9.1.3

The definition of the tested packets format and the transmission of the tested packets

hwTestMessageEntry row .1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1

Entry for Test Message Table.

Indexes

hwTestMessageIndex

Column	Syntax	OID
hwTestMessageIndex Set the index for the tested packets table	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.1
hwTestMessageMacAddress The destination MAC address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.11
hwTestMessageVlanID VLAN index	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.12
hwTestMessageInterface If the interface is specified, specify the interface name.	OctetStringr/w	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.13
hwTestMessageServiceInstance Name of the service instance	OctetStringr/w	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.14
hwTestMessagePacketSize The length of the sent tested packets ranges from 64 to 1518 in byte, and the default value is 64.	Unsigned32r/w Constraints: range: 64-1518	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.15
hwTestMessageSendPackets The number of the sent tested packets ranges from 1 to 65535 in integer, and the default value is 5.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.16
hwTestMessageSendSpeed Enumerated type indicates the rate of sending the packets: oneMbps and fiveMbps. The default is oneMbps.	HWTestMessageSendSpeedr/w Type Values: 1 oneMbps 2 fiveMbps	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.17
hwTestMessageSendEnabled The sending and termination of the tested packets	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.18
hwTestMessageSendFinished View whether the tested packets are stopped to be sent: 1, 2, 3, 4, and 5 indicate that has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupt…	HWTestMessageFinishedValue Type Values: 1 ready 2 testing 3 finished 4 failed 5 stop	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.19
hwTestMessageRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.136.1.4.1.2.1.51

View the returned results after tests

hwTestMessageResultEntry row .1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1

Entry for Test Message Table.

Indexes

hwTestMessageIndex

Column	Syntax	OID
hwTestMessageResultSendPackets The number of the sent packets	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.11
hwTestMessageResultReceivedPackets The number of the received packets	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.12
hwTestMessageResultPacketsLost Packets loss ratio	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.13
hwTestMessageResultSendBytes The number of the sent bytes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.14
hwTestMessageResultReceivedBytes The number of the received bytes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.15
hwTestMessageResultBytesLost The number of the lost bytes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.16
hwTestMessageBeginTimeStamp The time of starting the Test operation	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.17
hwTestMessageEndTimeStamp The time of ending the Test operation	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.25.136.1.4.1.3.1.18

This table is used to configure OAM functions for base.

hwY1731BaseConfigEntry row .1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1

The configuration entry of base config.

Indexes

hwDot1agCfmMdIndex hwDot1agCfmMaIndex

Column	Syntax	OID
hwY1731PwMeasureMode This object indicates the PW measure mode. Options: 1. invalid(1) -indicates that the value is invalid if MA is associated with a VLAN. 2. symmetry(2) -indicates that the type of the CfmMdMhfIdPermission is symmetry.…	Enumerationr/w Enumerated Values: 1 invalid 2 symmetry 3 asymmetry	.1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.1
hwY1731OneDelayThreshold This object indicates the alarm threshold for the one-way ETH-DM. This object can be set only in VLAN. The value ranges from 1 to 4294967295. If hwY1731OneDelayThreshold is set to 0, the default alarm threshold of the o…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.2
hwY1731TwoDelayThreshold This object indicates the alarm threshold for the two-way ETH-DM. This object can be set only in VLAN. The value ranges from 1 to 4294967295. If hwY1731TwoDelayThreshold is set to 0, the default alarm threshold of the t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.8.1.1.1.3

This table is used to configure OAM functions for performance monitoring.

hwY1731ConfigEntry row .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1

The configuration entry of performance monitoring functions.

Indexes

hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwY1731RemoteIp hwY1731VcId hwY1731MacAddress hwY1731ResvIndex

Column	Syntax	OID
hwY1731RemoteIp This object indicates the IP address of the remote end.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1
hwY1731VcId This object indicates the VC ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2
hwY1731MacAddress This object indicates the MAC address of the remote end.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3
hwY1731ResvIndex This object indicates the index for reserve.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4
hwY1731ServiceType This object indicates the type of service. Options: 1. vlan(1) -indicates that the type of service is vlan. 2. vsi(2) -indicates that the type of service is vsi. 3. vll(3) -indicates that the type of service is …	Enumeration Enumerated Values: 1 vlan 2 vsi 3 vll 4 unknown 5 unbind 6 ccc	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5
hwY1731SingleLossRecvEnable This object indicates whether the single-ended ETH-LM receiving is enabled on the MEP in the MA to implement the single-ended ETH-LM. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.6
hwY1731OneDelayRecvEnable This object indicates whether the one-way ETH-DM receiving is enabled on the MEP in the MA to implement the one-way ETH-DM. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7
hwY1731OneDelayRecvEnableIsContinue This object indicates whether the one-way ETH-DM receiving is continual.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8
hwY1731TwoDelayRecvEnable This object indicates whether the two-way ETH-DM receiving is enabled on the MEP in the MA to implement the two-way ETH-DM. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9
hwY1731SingleLossEnable This object indicates whether the single-ended ETH-LM sending is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.10
hwY1731SingleLossIsContinue This object indicates whether the single-ended ETH-LM sending is continual. If the value is 'false', it indicates that the single-ended ETH-LM is on-demand.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.11
hwY1731SingleLossMepId This object indicates the ID of the local MEP that is specified in the single-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.12
hwY1731SingleLossDestIsMepId This object indicates whether the destination MAC address of the single-ended ETH-LM is the specified RMEP's MAC address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.13
hwY1731SingleLossDestMepId This object indicates the ID of the remote MEP that is specified in the single-ended ETH-LM operation. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.14
hwY1731SingleLossMacAddress This object indicates the MAC address of the remote end.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15
hwY1731SingleLossInterval This object indicates the interval of the sent LMM frames. When on-demand OAM, the value can be: 1 second 10 seconds When proactive OAM, the value can be: 1 second 10 seconds 30 seconds Options: 1. invali…	Enumerationr/w Enumerated Values: 1 invalid 2 interval1s 3 interval10s 4 interval30s	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.16
hwY1731SingleLossCount This object indicates the number of LMM frames to be sent. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.17
hwY1731SingleLoss8021pValue This object indicates the 802.1p priority of the sent LMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.18
hwY1731DualLossEnable This object indicates whether the dual-ended ETH-LM is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.19
hwY1731DualLossMepId This object indicates the ID of the local MEP that is specified in the dual-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.20
hwY1731DualLossDestMepId This object indicates the ID of the remote MEP that is specified in the dual-ended ETH-LM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.21
hwY1731OneDelayEnable This object indicates whether the one-way ETH-DM sending is enabled. The value can be: enabled disabled By default, the value is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22
hwY1731OneDelayIsContinue This object indicates whether the one-way ETH-DM sending is continual. If the value is 'false', it indicates that the one-way ETH-DM is on-demand.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23
hwY1731OneDelayMepId This object indicates the ID of the local MEP that is specified in the one-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24
hwY1731OneDelayDestIsMepId This object indicates whether the destination MAC address of the one-way ETH-DM is the specified RMEP's MAC address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25
hwY1731OneDelayDestMepId This object indicates the ID of the remote MEP that is specified in the one-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26
hwY1731OneDelayMacAddress This object indicates the MAC address of the RMEP.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27
hwY1731OneDelayInterval This object indicates the interval of the sent 1DM frames. When on-demand OAM, the value can be: 1 second 10 seconds When proactive OAM, the value can be: 1 second 10 seconds 30 seconds Options: 1. invali…	Enumerationr/w Enumerated Values: 1 invalid 2 interval1s 3 interval10s 4 interval30s	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28
hwY1731OneDelayCount This object indicates the number of the sent 1DM frames. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29
hwY1731OneDelay8021pValue This object indicates the 802.1p priority of the sent 1DM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.30
hwY1731TwoDelayEnable This object indicates whether the two-way ETH-DM sending is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31
hwY1731TwoDelayIsContinue This object indicates whether the two-way ETH-DM sending is continual. If the value is 'false', it indicates that the two-way ETH-DM is on-demand.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32
hwY1731TwoDelayMepId This object indicates the ID of the local MEP that is specified in the two-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33
hwY1731TwoDelayDestIsMepId This object indicates whether the destination MAC address of the two-way ETH-DM is the specified RMEP's MAC address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34
hwY1731TwoDelayDestMepId This object indicates the ID of the remote MEP that is specified in the two-way ETH-DM operation. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35
hwY1731TwoDelayMacAddress This object indicates the destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36
hwY1731TwoDelayInterval This object indicates the interval of the sent DMM frames. When on-demand OAM, the value can be: 1 second 10 seconds When proactive OAM, the value can be: 1 second 10 seconds 30 seconds Options: 1. invali…	Enumerationr/w Enumerated Values: 1 invalid 2 interval1s 3 interval10s 4 interval30s	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37
hwY1731TwoDelayCount This object indicates the number of the sent DMM frames. The value can be 0 or ranges from 1 to 60. When proactive OAM, the value is 0.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38
hwY1731TwoDelay8021pValue This object indicates the 802.1p priority of the sent DMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) 6 - …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.39
hwY1731SingleLossRecv8021pValue This object indicates the 802.1p priority of the received LMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.40
hwY1731OneDelayRecv8021pValue This object indicates the 802.1p priority of the received 1DM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.41
hwY1731TwoDelayRecv8021pValue This object indicates the 802.1p priority of the received DMM packets. The priority value ranges from 0 to 7. It maps a 8 bits number. 0 - 1 (0x01) 1 - 2 (0x02) 2 - 4 (0x04) 3 - 8 (0x08) 4 - 16 (0x10) 5 - 32 (0x20) …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.42
hwY1731SingleLossRecvMepId This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.43
hwY1731OneDelayRecvMepId This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.44
hwY1731TwoDelayRecvMepId This object indicates the ID of the local MEP. The value can be 0 or ranges from 1 to 8191. The value 0 is an invalid value.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.45
hwY1731OneDelayPacketSize This object indicates the size of one-way ETH-DM packet. The value can be 0 or ranges from 64 to 1518. The value 0 means that the packet size is not specified. By default, the value is 0.	Integer32r/w Constraints: range: 0-0 range: 64-1518	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.46
hwY1731TwoDelayPacketSize This object indicates the size of a two-way ETH-DM packet. The value can be 0 or ranges from 64 to 1518. The value 0 means that the packet size is not specified. By default, the value is 0.	Integer32r/w Constraints: range: 0-0 range: 64-1518	.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.47