hwDot3ahEfmOperStatus
HUAWEI-ETHOAM-MIB ·
.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.2
Object
column
Enumeration
At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. Options: 1. disabled(1) -indicates that the type of the EfmOperStatus is disabled. 2. linkFault(2) -indicates that the type of the EfmOperStatus is linkFault. 3. passiveWait(3) -indicates that the type of the EfmOperStatus is passiveWait. 4. activeSendLocal(4) -indicates that the type of the EfmOperStatus is activeSendLocal. 5. sendLocalAndRemote(5) -indicates that the type of the EfmOperStatus is sendLocalAndRemote. 6. sendLocalAndRemoteOk(6) -indicates that the type of the EfmOperStatus is sendIdNone. 7. oamPeeringLocallyRejected(7) -indicates that the type of the EfmOperStatus is sendLocalAndRemoteOk. 8. oamPeeringRemotelyRejected(8) -indicates that the type of the EfmOperStatus is oamPeeringRemotelyRejected. 9. operational(9) -indicates that the type of the EfmOperStatus is operational. 10. nonOperHalfDuplex(10) -indicates that the type of the EfmOperStatus is nonOperHalfDuplex.
Context
- MIB
- HUAWEI-ETHOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwDot3ahEfmEntry
- Table
- hwDot3ahEfmTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | linkFault |
3 | passiveWait |
4 | activeSendLocal |
5 | sendLocalAndRemote |
6 | sendLocalAndRemoteOk |
7 | oamPeeringLocallyRejected |
8 | oamPeeringRemotelyRejected |
9 | operational |
10 | nonOperHalfDuplex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDot3ahEfmAdminState This object is used to provision the default administrative
OAM mode for this interface. This object represents the
desired state of OAM for this interface.
The hw… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.1 |
| hwDot3ahEfmMode This object configures the mode of OAM operation for this
Ethernet like interface. OAM on Ethernet interfaces may be in
'active' mode or 'passive' mode.
Options:
1. active(1) -i… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.3 |
| hwDot3ahEfmMaxOamPduSize The largest OAMPDU that the OAM entity supports. OAM
entities exchange maximum OAMPDU sizes and negotiate to use
the smaller of the two maximum OAMPDU sizes between the peers.
Th… | column | octets Unsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.4 |
| hwDot3ahEfmConfigRevision The configuration revision of the OAM entity as reflected in
the latest OAMPDU sent by the OAM entity. The config revision
is used by OAM entities to indicate configuration chang… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.5 |
| hwDot3ahEfmFunctionsSupported The OAM functions supported on this Ethernet like interface.
OAM consists of separate functional sets beyond the basic
discovery process which is always required. These functiona… | column | Bits | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.6 |
| hwDot3ahEfmTimeout The EFM Timeout object defines the max time that the EFM session
stays in detect mode since the last OAMPDU received. if there's
no OAMPDU received within the time the timeout va… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.7 |
| hwDot3ahEfmInterval The EFM interval object defines the interval of sending OAM PDUs.
The value of EFM interval should be the same as the value of
the peer interface.
T… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.2.2.2.1.8 |