hwY1731RemoteIp
HUAWEI-ETHOAM-MIB ·
.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1
Object
column
SNMPv2-SMIIpAddress
This object indicates the IP address of the remote end.
Context
- MIB
- HUAWEI-ETHOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- hwY1731ConfigEntry
- Table
- hwY1731ConfigTable
- Siblings
- 46
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwY1731SingleLossEnable This object indicates whether the single-ended ETH-LM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.10 |
| hwY1731SingleLossIsContinue This object indicates whether the single-ended ETH-LM sending is continual.
If the value is 'false', it indicates that the single-ended ETH-LM is on-demand. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.11 |
| hwY1731SingleLossMepId This object indicates the ID of the local MEP that is specified
in the single-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.12 |
| hwY1731SingleLossDestIsMepId This object indicates whether the destination MAC address of
the single-ended ETH-LM is the specified RMEP's MAC address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.13 |
| hwY1731SingleLossDestMepId This object indicates the ID of the remote MEP that is specified
in the single-ended ETH-LM operation.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.14 |
| hwY1731SingleLossMacAddress This object indicates the MAC address of the remote end. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.15 |
| hwY1731SingleLossInterval This object indicates the interval of the sent LMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.16 |
| hwY1731SingleLossCount This object indicates the number of LMM frames to be sent.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.17 |
| hwY1731SingleLoss8021pValue This object indicates the 802.1p priority of the sent LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.18 |
| hwY1731DualLossEnable This object indicates whether the dual-ended ETH-LM is enabled.
The value can be:
enabled
disabled
By default, the value is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.19 |
| hwY1731VcId This object indicates the VC ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.2 |
| hwY1731DualLossMepId This object indicates the ID of the local MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.20 |
| hwY1731DualLossDestMepId This object indicates the ID of the remote MEP that is specified
in the dual-ended ETH-LM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.21 |
| hwY1731OneDelayEnable This object indicates whether the one-way ETH-DM sending is enabled.
The value can be:
enabled
disabled
By default, the value is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.22 |
| hwY1731OneDelayIsContinue This object indicates whether the one-way ETH-DM sending is continual.
If the value is 'false', it indicates that the one-way ETH-DM is on-demand. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.23 |
| hwY1731OneDelayMepId This object indicates the ID of the local MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.24 |
| hwY1731OneDelayDestIsMepId This object indicates whether the destination MAC address of
the one-way ETH-DM is the specified RMEP's MAC address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.25 |
| hwY1731OneDelayDestMepId This object indicates the ID of the remote MEP that is specified
in the one-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.26 |
| hwY1731OneDelayMacAddress This object indicates the MAC address of the RMEP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.27 |
| hwY1731OneDelayInterval This object indicates the interval of the sent 1DM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.28 |
| hwY1731OneDelayCount This object indicates the number of the sent 1DM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.29 |
| hwY1731MacAddress This object indicates the MAC address of the remote end. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.3 |
| hwY1731OneDelay8021pValue This object indicates the 802.1p priority of the sent 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.30 |
| hwY1731TwoDelayEnable This object indicates whether the two-way ETH-DM sending is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.31 |
| hwY1731TwoDelayIsContinue This object indicates whether the two-way ETH-DM sending is continual.
If the value is 'false', it indicates that the two-way ETH-DM is on-demand. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.32 |
| hwY1731TwoDelayMepId This object indicates the ID of the local MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.33 |
| hwY1731TwoDelayDestIsMepId This object indicates whether the destination MAC address of
the two-way ETH-DM is the specified RMEP's MAC address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.34 |
| hwY1731TwoDelayDestMepId This object indicates the ID of the remote MEP that is specified
in the two-way ETH-DM operation.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.35 |
| hwY1731TwoDelayMacAddress This object indicates the destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.36 |
| hwY1731TwoDelayInterval This object indicates the interval of the sent DMM frames.
When on-demand OAM, the value can be:
1 second
10 seconds
When proactive OAM, the value can be:
1 second
10 … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.37 |
| hwY1731TwoDelayCount This object indicates the number of the sent DMM frames.
The value can be 0 or ranges from 1 to 60.
When proactive OAM, the value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.38 |
| hwY1731TwoDelay8021pValue This object indicates the 802.1p priority of the sent DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 - 8 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.39 |
| hwY1731ResvIndex This object indicates the index for reserve. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.4 |
| hwY1731SingleLossRecv8021pValue This object indicates the 802.1p priority of the received LMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.40 |
| hwY1731OneDelayRecv8021pValue This object indicates the 802.1p priority of the received 1DM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.41 |
| hwY1731TwoDelayRecv8021pValue This object indicates the 802.1p priority of the received DMM packets.
The priority value ranges from 0 to 7. It maps a 8 bits number.
0 - 1 (0x01)
1 - 2 (0x02)
2 - 4 (0x04)
3 … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.42 |
| hwY1731SingleLossRecvMepId This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.43 |
| hwY1731OneDelayRecvMepId This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.44 |
| hwY1731TwoDelayRecvMepId This object indicates the ID of the local MEP.
The value can be 0 or ranges from 1 to 8191.
The value 0 is an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.45 |
| hwY1731OneDelayPacketSize This object indicates the size of one-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the val… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.46 |
| hwY1731TwoDelayPacketSize This object indicates the size of a two-way ETH-DM packet.
The value can be 0 or ranges from 64 to 1518.
The value 0 means that the packet size is not specified.
By default, the v… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.47 |
| hwY1731ServiceType This object indicates the type of service.
Options:
1. vlan(1) -indicates that the type of service is vlan.
2. vsi(2) -indicates that the type of service is vsi.
3. vll(3) … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.5 |
| hwY1731SingleLossRecvEnable This object indicates whether the single-ended ETH-LM receiving is enabled on the MEP
in the MA to implement the single-ended ETH-LM.
The value can be:
enabled
disab… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.6 |
| hwY1731OneDelayRecvEnable This object indicates whether the one-way ETH-DM receiving is enabled on the MEP
in the MA to implement the one-way ETH-DM.
The value can be:
enabled
disabled
By def… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.7 |
| hwY1731OneDelayRecvEnableIsContinue This object indicates whether the one-way ETH-DM receiving is continual. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.8 |
| hwY1731TwoDelayRecvEnable This object indicates whether the two-way ETH-DM receiving is enabled on the MEP
in the MA to implement the two-way ETH-DM.
The value can be:
enabled
disabled
By def… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.136.1.8.1.2.1.9 |