NETI-ITS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
103

itsIfTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.2 · 1 row entry · 19 columns
Open in standard view 
Table with all service interfaces that is detected by the
device.  The table contains configuration objects common to
all types of interfaces.
itsIfEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.2.1
One interface is represented by one conceptual row in the table.
Rx and Tx is always relative the application domain.
Indexes
itsIfIndex
Column Syntax OID
itsIfIndex
The index in the table. The index is maintained across
re-boots. The index is a positive integer value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.1
itsIfIfIndex
A reference to the index in the ifTable in the IF-MIB. If
this is not known, the value is 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.2
itsIfName
The textual name of the interface. The value of this object
should be the name of the interface as assigned by the local
device and should be suitable for use in commands entered at
the device's console. This might be a…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.3
itsIfDescr
A textual string containing information about the interface.
This string should include the name of the manufacturer, the
product name and the version of the interface
hardware/software. This description would be the sa…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.4
itsIfSpeed
The interface's capacity in bits per second. This value would
be the same as presented by the object ifSpeed in the
ifTable.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.5
itsIfSuppressAlarm
The alarm suppression mode. When alarms are suppressed, no
alarms will be generated if a fault situation is detected on
the interface. Failures will still be shown by the object
itsIfFailure.

notSupported…
Enumerationr/w
Enumerated Values:
0notSupported
1none
2warning
3all
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.6
itsIfLoopMode
Loop-back mode of the interface. When the loop-back mode is
changed to line(2) or dtm(3), a timer is initialized with the
value of itsIfLoopTime. The loop-back mode is reset to
none(1) when the timer runs out.
…
Enumerationr/w
Enumerated Values:
0notSupported
1none
2line
3dtm
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.7
itsIfLoopTime deprecated
Timer for the loop-back mode. The loop-back mode is reset to
its normal mode none(0) after the specified number of
seconds. A timer value of 0 indicates infinite time, which
means that the interface stays in loop-back m…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.8
itsIfCapabilities
Capabilities of the interface. The corresponding bit is set if
the capability is supported by the interface.

multicast(0). It is possible to use in multicast connection.

allowProtection(1).…
Bits
Enumerated Values:
0multicast
1allowProtection
2requireCapacity
3channelPM
4interfacePM
5ttp
6mon
7loopl
8loopd
9sdi1483
10sdi1485
11sdi288
12sdi270
13sdi2967
14sdi2970
15fs
16avrs
19madi
20ref
21j2kEnc
22j2kDec
23hitps
24psType3
25dvrs
31compatible
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.9
itsIfProperties
Properties on the interface. A property can only be set if
the interface supports has the corresponding capability. The
capabilities of the interface can be determined by examine
itsIfCapabilities.

Curr…
Bitsr/w
Enumerated Values:
0tbd
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.10
itsIfDefects
Defects indicated on the interface since the last time the
object was read.

los(0) Loss of Signal was detected.

lof(1) Loss of Frame was detected.

ais(2). Alarm Indication Si…
Bits
Enumerated Values:
0los
1lof
2ais
3lop
4lod
5rdi
6lol
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.11
itsIfFailure
A textual string describing a fault status on the
interface. The object presents an empty string if there are
no faults on the interface.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.12
itsIfPMReference
A reference to an object that presents performance data
for the interface. The object is not part of this MIB.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.13
itsIfOperStatus
The operational state of the interface. This is the same as
the object ifOperStatus in the ifTable.

up(1). The interface passes data and is used by a TTP.

down(2). The interface is down. If…
Enumeration
Enumerated Values:
1up
2down
4unknown
5dormant
6notPresent
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.14
itsIfTxMuteOnFault
Controls the interface output in case of a fault.

notSupported(0). The interface does not support control of
transmitter on fault. This value can only be read, and can
never be written.

ena…
Enumerationr/w
Enumerated Values:
0notSupported
1enable
2disable
3freeze
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.15
itsIfPurpose
A string presenting the purpose of the TTP that is actively
(trying) to use the interface. If no TTP is using the
interface, then the purpose is empty. If an interface can be
used as input and output interface at the …
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.16
itsIfInterfaceType
Denotes the type of interface.
Enumeration
Enumerated Values:
1pdh
2sdh
3sdi
4dvb
5aes
6mon
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.17
itsIfMembersSrc
A list of values of the itsSrcTtpIndex for the source trail
termination points (TTPs) that are actively connected to
this interface. A TTP can only be connected to an
interface if its administrative state is `up'.
ItsTtpIndexList
Textual Convention: ItsTtpIndexList OctetString
Type Constraints:
range: 0
range: 4
range: 8
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.18
itsIfMembersSnk
A list of values of the itsSnkTtpIndex for the sink trail
termination points (TTPs) that are actively connected to
this interface. A TTP can only be connected to an
interface if its administrative state is `up'.
ItsTtpIndexList
Textual Convention: ItsTtpIndexList OctetString
Type Constraints:
range: 0
range: 4
range: 8
 .1.3.6.1.4.1.2928.6.2.16.1.1.2.1.19

itsIfPdhTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.3 · 1 row entry · 2 columns
Open in standard view 
Table with PDH interfaces.  The table contains configuration
objects specific for PDH interfaces.  The table is indexed using
the same index as the itsIfTable.
itsIfPdhEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.3.1
One PDH interface is represented by one conceptual row in the
table. The interface is also represented in the itsIfTable
using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfPdhSignal
Selects type of signal to transport, E3 or DS3.
Enumerationr/w
Enumerated Values:
1e3
2ds3
 .1.3.6.1.4.1.2928.6.2.16.1.1.3.1.1
itsIfPdhFraming
Selects the type of framing to use. The valid values depend on
selection of type on `itsIfPdhType'.

none(1). No framing.

g751(2). Only valid for E3.

g832(3). Only valid fo…
Enumerationr/w
Enumerated Values:
1none
2g751
3g832
4cbit
5m13
 .1.3.6.1.4.1.2928.6.2.16.1.1.3.1.2

itsIfSdhTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.4 · 1 row entry · 7 columns
Open in standard view 
Table with SDH interfaces.  The table contains configuration
objects specific for SDH interfaces.  The table is indexed using
the same index as the itsIfTable.
itsIfSdhEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.4.1
One SDH interface is represented by one conceptual row in the
table. The interface is also represented in the itsIfTable
using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfSdhTiming
Selects timing mode for the interface, i.e. clock source in
transmission path.
Enumerationr/w
Enumerated Values:
1loop
2internal
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.1
itsIfSdhMode
Sets SDH or SONET interface mode.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.2
itsIfSdhSs
Payload mapping type.
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.3
itsIfSdhS1
Synchronization message to send to external equipment in
transmission path. This defines the quality level of the
clock used to transmit data.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.4
itsIfSdhSoh
A string containing the values of some section overhead
bytes. The byte values are on the format byte name, equal
sign, byte value. The values are then separated by a single
space character. I.e. the format is `S1=n …
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.5
itsIfSdhPoh
A string containing the values of some path overhead bytes.
The byte values are on the format byte name, equal sign, byte
value. The values are then separated by a single space
character. I.e. the format is `B3=n G1=n…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.6
itsIfSdhJc
A string containing the values of some justification
counters. The byte values are on the format counter name,
equal sign, byte value. The values are then separated by a
single space character. I.e. the format is `RP…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.4.1.7

itsIfDvbTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.5 · 1 row entry · 2 columns
Open in standard view 
Table with DVB interfaces.  The table contains configuration
objects specific for DVB interfaces.  The table is indexed using
the same index as the itsIfTable.
itsIfDvbEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.5.1
One DVB interface is represented by one conceptual row in the
table. The interface is also represented in the itsIfTable
using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfDvbFormat
A textual string in a non-formal format describing the format
of the data.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.5.1.1
itsIfDvbOutputMode
Selects output mode.
Enumerationr/w
Enumerated Values:
1auto
2burst
3spread
 .1.3.6.1.4.1.2928.6.2.16.1.1.5.1.2

itsIfAesTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.6 · 1 row entry · 2 columns
Open in standard view 
Table with AES interfaces.  The table contains configuration
objects specific for AES interfaces.  The table is indexed
using the same index as the itsIfTable.
itsIfAesEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.6.1
One AES interface is represented by one conceptual row in the
table.
Indexes
itsIfIndex
Column Syntax OID
itsIfAesIsTimingProvider
Selects whether the interface will be used primarily as as
timing provider for other interfaces on the same board. This
object is applicable only if the interface supports reference
locking, i.e. if the `ref' bit is se…
Enumerationr/w
Enumerated Values:
0no
1wordClock
 .1.3.6.1.4.1.2928.6.2.16.1.1.6.1.1
itsIfAesReference
Selects the source interface to use as timing reference for
output alignment. The source can be any other interface on
the same board except itself. The value is the relative
interface number on the board, where the f…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.6.1.2

itsIfSdiTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.7 · 1 row entry · 7 columns
Open in standard view 
Table with SDI video interfaces.  The table contains configuration
objects specific to SDI interfaces.  The table is indexed using the
same index as the itsIfTable.
itsIfSdiEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.7.1
One SDI interface is represented by one conceptual row in the
table. The interface is also represented in the itsIfTable
using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfSdiFormat
Video source format. The format is presented as

`<pixels-per-line>x<lines-per-frame><i/p> @ <freq> Hz'

E.g. `1920x1080p @ 30 Hz'

The string is empty if no format is detected.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.1
itsIfSdiAutoSense
Controls whether autosense of the input/output signal shall
be enabled or not.

notSupported(0). The interface does not support autosense.

enable(1). Autosense is enabled. Input or output…
Enumerationr/w
Enumerated Values:
0notSupported
1enable
2disable
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.2
itsIfSdiIsTimingProvider
Selects whether the interface will be used primarily as as
timing provider for other interfaces on the same board. This
object is applicable only if the interface supports analog
video reference signal, or digital vid…
Enumerationr/w
Enumerated Values:
0no
1analog
2digital
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.3
itsIfSdiReference
Selects the source interface to use as timing reference for
output alignment. The source can be any interface on the
same board. The value is the relative interface number on
the board, where the first interface on th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4
itsIfSdiFsVDelay obsolete
Adjusts the vertical output delay in number of lines.

This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
itsIfCapabilities.
Integer32r/w
Constraints:
range: -3-1124
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.5
itsIfSdiFsHDelay obsolete
Adjusts the horizontal output delay in number of pixels.

This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
itsIfCapabilities.
Integer32r/w
Constraints:
range: -3865-259
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.6
itsIfSdiFsDelay
Adjusts the output delay in number of nanoseconds.

This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
itsIfCapabilities.
Integer32r/w
Constraints:
range: -20854167-20854167
 .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.7

itsIfMonTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.9 · 1 row entry · 3 columns
Open in standard view 
Table with monitor interfaces.  The table contains
configuration objects specific for monitor interfaces.  A
monitor interface is used for monitoring data on another
interface.  It outputs the same data as the in- or output of
the interface that it is monitoring.
          
The table is indexed using the same index as the itsIfTable.
itsIfMonEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.9.1
One monitor port is represented by one conceptual row in the
table. The interface is also represented in the itsIfTable
using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfMonMonitoredInterface
The relative number of the interface on the board that this
interface is selected to monitor. The first interface on the
board is number 1, the second is number 2 and so on. A value
of 0 denotes that no interface shal…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.9.1.1
itsIfMonDirection
The direction of the monitored interface.

in(1). Monitors the input data of the monitored interface.

out(2). Monitors the output data of the monitored interface.
Enumerationr/w
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.2928.6.2.16.1.1.9.1.2
itsIfEnableButton
Controls if a `monitor' push button on the device front panel
is enabled for selection of interface to monitor. This
object is only applicable for boards supporting this
function.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.9.1.3

itsIfJ2kTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.10 · 1 row entry · 10 columns
Open in standard view 
Table with JPEG 2000 interfaces.  The table contains
configuration objects specific for JPEG 2000 encoding and
decoding capable interfaces, i.e. when any of the bits
`j2kEnc' or `j2kDec' are set in `itsIfCapabilities'.
          
The table is indexed using the same index as the itsIfTable.
itsIfJ2kEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.10.1
One JPEG 2000 capable interface is represented by one
conceptual row in the table. The interface is also
represented in the itsIfTable using the same index.
Indexes
itsIfIndex
Column Syntax OID
itsIfJ2kEncoderEnable
Selects whether the JPEG 2000 encoder functionality is
enabled of not for the interface. The rate of the JPEG 2000
stream is calculated from the channel capacity set in the
channel manager (NETI-CHMGR-MIB). This objec…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.1
itsIfJ2kDecoderActive
Indicates whether the JPEG 2000 decoder functionality is
active or not. The interface acting as JPEG 2000 decoder is
automatic. Only an egress interface can act as decoder.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.2
itsIfJ2kSignalFormat
Indicates for which format JPEG 2000 is configured. The
choice of format affects the available VBI configuration, the
number of audio groups, and the configurable bandwidth range.

notApplicable(0). If the…
Enumerationr/w
Enumerated Values:
0notApplicable
1sdSdi
3hdSdiEu
4hdSdiUs
5hd3gSdiEu
6hd3gSdiUs
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.3
itsIfJ2kRateVideo
The actual JPEG 2000 code stream bit rate. Applicable for
both encoder and decoder interfaces.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.4
itsIfJ2kRateVideoMax
The maximum JPEG 2000 code stream bit rate, calculated from
the channel capacity, ANC, audio and VBI configurations.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.5
itsIfJ2kRateVbi
The VBI service bit rate detected and forwarded.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.6
itsIfJ2kRateAnc
The ancillary data bit rate detected and forwarded.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.7
itsIfJ2kRateAudio
The audio bit rate detected and forwarded.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.8
itsIfJ2kAudioSampleSize
The number of bits used for the audio samples: default 20-bit
audio or extended 24-bit audio. This value is applicable
only for SD-SDI signal format (PAL/NTSC), and only on source
interfaces. The value zero (0) indica…
Unsigned32r/w
Constraints:
range: 0-0
range: 20-20
range: 24-24
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.9
itsIfJ2kReduceAudioTransportBitrate
Enables or disables enhanced audio transport, using a reduced
transport bitrate for the audio. This is only applicable for
HD and 3G format, and only when the JPEG 2000 encodes is
enabled (`itsIfJ2KEncodedEnable').
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.10.1.10

itsIfSdiAudioTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.11 · 1 row entry · 2 columns
Open in standard view 
Table with audio groups.  The table contains configuration
objects specific for audio groups in SDI streams.  Each audio
group consists of 4 audio channels.  Audio group 5-8 is
available only for 3G-SDI.  The table is indexed per
interface and per audio group.
itsIfSdiAudioEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.11.1
One audio group is represented by one conceptual row in the
table. An entry may only exist for an interface that is
capable of JPEG 2000, i.e. when any of the bits `j2kEnc' or
`j2kDec' are set in `itsIfCapabilities'. T…
Indexes
itsIfIndex itsIfSdiAudioIndex
Column Syntax OID
itsIfSdiAudioIndex
Index in the table. The index specifies the audio group
number. Index 5-8 is only available for 3G-SDI.
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2928.6.2.16.1.1.11.1.1
itsIfSdiAudioForward
Indicates whether the audio group is enabled for transmission
or not. Only applicable for source end interfaces.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.11.1.2

itsIfSdiVbiTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.12 · 1 row entry · 3 columns
Open in standard view 
Table with Vertical Blanking Interval (VBI); lines outside
the actual picture that are used to forward data.  The number
of lines in the VBI depends on the format of the SDI signal.
VBI is only used in SD signals (PAL/NTSC).
itsIfSdiVbiEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.12.1
One entry per VBI line. An entry may only exist for an
interface that is capable of JPEG 2000, i.e. when any of the
bits `j2kEnc' or `j2kDec' are set in `itsIfCapabilities'.
The data is valid only if the interface is e…
Indexes
itsIfIndex itsIfSdiVbiIndex
Column Syntax OID
itsIfSdiVbiIndex
The index in the table for the VBI line. This is not the
same as the line number.
Integer32
Constraints:
range: 1-46
 .1.3.6.1.4.1.2928.6.2.16.1.1.12.1.1
itsIfSdiVbiLineNumber
The line number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.12.1.2
itsIfSdiVbiForward
Indicates whether the VBI line number is enabled for
forwarding or not. The value is applicable only for source
interfaces.
Enumerationr/w
Enumerated Values:
0notApplicable
1yes
2no
 .1.3.6.1.4.1.2928.6.2.16.1.1.12.1.3

itsIfSdiAncTable

table
.1.3.6.1.4.1.2928.6.2.16.1.1.13 · 1 row entry · 5 columns
Open in standard view 
Table with ancillary data.  This is embedded into the SDI
signal but is not video.
itsIfSdiAncEntry entry .1.3.6.1.4.1.2928.6.2.16.1.1.13.1
One DID/SDID combination is represented by one conceptual row
in the table. An entry may only exist for an interface that
is capable of JPEG 2000, i.e. when any of the bits `j2kEnc'
or `j2kDec' are set in `itsIfCapabil…
Indexes
itsIfIndex itsIfSdiAncIndex
Column Syntax OID
itsIfSdiAncIndex
An index in the table, with one row per DID/SDID combination.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2928.6.2.16.1.1.13.1.1
itsIfSdiAncDescription
A string that identifies or describes the service
corresponding to the DID/SDID combination.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.1.13.1.2
itsIfSdiAncDid
The Data ID. Identifies the type of ANC. If the value is
less than 0x08 then the ancillary data is of type 2, which
means that the SDID is also present and should be used.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.13.1.3
itsIfSdiAncSdid
The Secondary Data ID. This has the value of 0 if the
ancillary data is of type 1.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.13.1.4
itsIfSdiAncForward
Indicates if the DID/SDID combination is enabled for
forwarding or not. The value is applicable only for source
interfaces.
Enumerationr/w
Enumerated Values:
0notApplicable
1yes
2no
 .1.3.6.1.4.1.2928.6.2.16.1.1.13.1.5

itsIfPs3Table

table
.1.3.6.1.4.1.2928.6.2.16.1.1.14 · 1 row entry · 9 columns
Open in standard view 
Table with settings for hitless 1+1 protection.
itsIfPs3Entry entry .1.3.6.1.4.1.2928.6.2.16.1.1.14.1
One interface that is capable of hitless 1+1 protection is
represented by one row in this table. An entry may only
exist for an interface that is capable of switch type 3,
i.e. when the bits `hitps' or `psType3' is se…
Indexes
itsIfIndex
Column Syntax OID
itsIfPs3DifferentialDelay
Measured differential delay in microseconds between the two
paths. Zero (0) indicates that standby protection is used.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.1
itsIfPs3DifferentialDelayValid
Specifies if the value of itsIfPs3DifferentialDelay is valid
or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.2
itsIfPs3AheadInterface
The index of the sink trail termination point (TTP) that is
ahead. Minus one indicates either that information is not
available or is invalid.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.3
itsIfPs3HitlessProtection
Specifies if hitless protection shall be attempted or not.

true(1). Will attempt to reach a hitless protection state.

false(2). Will only attempt to reach a standby protection
state.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.4
itsIfPs3ProtectionStatus
The current protection state.
ItsProtectionStatus
Textual Convention: ItsProtectionStatus Enumeration
Type Values:
1unavailable
2unprotected
3standbyProtected
4hitlessCapable
5hitlessProtected
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.5
itsIfPs3ExpectedProtectionStatus
The expected protection state. When the current protection
state (see itsIfPs3ProtectionStatus) is lower than the expected
protection state, an alarm is raised. The alarm is cleared
when the expected protection state …
ItsProtectionStatusr/w
Textual Convention: ItsProtectionStatus Enumeration
Type Values:
1unavailable
2unprotected
3standbyProtected
4hitlessCapable
5hitlessProtected
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.6
itsIfPs3ForceHit
A write of zero (0) resets the buffers, and will therefore
minimize the the latency penalty incurred by the 1+1
buffering.
Unsigned32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.7
itsIfPs3ActiveInterface
The index of the sink trail termination point (TTP) that is
is selected as source. Minus one indicates either that
information is not available or is invalid.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.8
itsIfPs3MaxExpDifferentialDelay
Maximum expected differential delay in milliseconds where 0
(zero) implies largest possible value for channel capacity
and service type. If measured differential delay is above
this, hitless protected status can not be…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.1.14.1.9

itsSrcTtpTable

table
.1.3.6.1.4.1.2928.6.2.16.1.2.3 · 1 row entry · 13 columns
Open in standard view 
Table with source trail termination points.
itsSrcTtpEntry entry .1.3.6.1.4.1.2928.6.2.16.1.2.3.1
One conceptual row represents one source trail termination point.
Indexes
itsSrcTtpIndex
Column Syntax OID
itsSrcTtpIndex
The index in the table. The index is persistent cross reboots.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.1
itsSrcTtpName
The textual name of the trail termination point (TTP). The
value of this object should be the name of the TTP as
assigned by the local device and should be suitable for use
in commands entered at the device's console. T…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.2
itsSrcTtpCustomerId
A customer identification number that represents the customer
or user of the trail termination point (TTP). The value could
be used e.g. for identifying the customer in Charge Data
Records. The value zero (0) represents…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.3
itsSrcTtpPurpose
A string describing the purpose of the TTP. The string is for
administrative use.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.4
itsSrcTtpLocalIf
A reference to the local interface that shall be used by the
trail termination point (TTP). The value is representing the
index in the itsIfTable. The value must refers to an existing
entry in itsIfTable. When a TTP is …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.5
itsSrcTtpLocalDsti
The DSTI (DTM Service Type Instance) for the source trail
termination point. The value is used by the connection to
refer to this trail termination point. The DSTI must be unique
among the ITS source trail termination p…
NETI-CHMGR-MIBDstir/w
Textual Convention: NETI-CHMGR-MIBDsti Unsigned32
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.6
itsSrcTtpMode
The TTP mode. The associated interface, itsSrcTtpLocalIf,
must have the capability to support the property when the
administrative state of the TTP is set to up.

unicast(1). The trail termination point sh…
Enumerationr/w
Enumerated Values:
1unicast
2multicast
3compatible
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.7
itsSrcTtpODescription
A reference to the corresponding description of the
connection in the chmgrODescriptionTable in the Channel
Manager MIB (NETI-CHMGR-MIB). The value is the index into the
table, i.e. the value of chmgrODescrIndex. When a…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.8
itsSrcTtpOConnection
A reference to the corresponding originating connection in
the table chmgrOConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). When an originating connection is
established from this trail termination point, an…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.9
itsSrcTtpFailure
A textual string describing a fault status on the trail
termination point (TTP). A configuration error is regarded as
a fault state, which is indicated when the administrative
state is down. A network related fault can …
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.10
itsSrcTtpAdminStatus
The administrative state of the connection. The value
controls the desired state of the connection from the trail
termination point (TTP). Note that the associated interface
must have capabilities that matches the prope…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.11
itsSrcTtpOperStatus
The operational state of the trail termination point (TTP).

up(1). The TTP is up and a connection is established to all
destinations. If the connection is 1+1 protected, both the
channels are established …
Enumeration
Enumerated Values:
1up
2down
4unknown
5dormant
9partial
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.12
itsSrcTtpRowStatus
See SNMPv2-TC. Use itsSrcTtpAdminStatus to activate and
de-activate a connection. The following values are supported:

active(1). The object always reads active.

createAndGo(4). A new concep…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.13

itsSrcIndexLookupTable

table
.1.3.6.1.4.1.2928.6.2.16.1.2.4 · 1 row entry · 1 columns
Open in standard view 
Table to lookup a DSTI to an index in the itsSrcTtpTable.
itsSrcIndexLookupEntry entry .1.3.6.1.4.1.2928.6.2.16.1.2.4.1
One conceptual row represents one lookup entry.
Indexes
itsSrcTtpLocalDsti
Column Syntax OID
itsSrcIndexLookupIndex
The value refers to the index in table itsSrcTtpTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.2.4.1.1

itsSnkTtpTable

table
.1.3.6.1.4.1.2928.6.2.16.1.3.3 · 1 row entry · 17 columns
Open in standard view 
Table with sink trail termination points.
itsSnkTtpEntry entry .1.3.6.1.4.1.2928.6.2.16.1.3.3.1
One conceptual row represents one sink trail termination point.
Indexes
itsSnkTtpIndex
Column Syntax OID
itsSnkTtpIndex
The index in the table. The index is persistent across reboots.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.1
itsSnkTtpName
The textual name of the trail termination point (TTP). The
value of this object should be the name of the TTP as
assigned by the local device and should be suitable for use
in commands entered at the device's console. T…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.2
itsSnkTtpCustomerId
A customer identification number that represents the customer
or user of the trail termination point (TTP). The value could
be used e.g. for identifying the customer in Charge Data
Records. The value zero (0) represents…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.3
itsSnkTtpPurpose
A string describing the purpose of the TTP. The object use is
for administrative purpose.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.4
itsSnkTtpLocalIf
A reference to the local interface that shall be used by the
trail termination point (TTP). The value is representing the
index in the itsIfTable. The value must point to an existing
interface. When the TTP is created, …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.5
itsSnkTtpLocalDsti
The DSTI (DTM Service Type Instance) for the sink trail
termination point. The value is used by the connection to
refer to this trail termination point. The DSTI must be
unique among the ITS sink trail termination point…
NETI-CHMGR-MIBDstir/w
Textual Convention: NETI-CHMGR-MIBDsti Unsigned32
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.6
itsSnkTtpPSActiveChannel
The channel to use on a 1+1 protected connection. When a
connection is being established, the first established
channel will become the active channel. The device will
switch to the other channel when it detects a fault…
Enumerationr/w
Enumerated Values:
1primary
2secondary
3none
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.7
itsSnkTtpSuppressAlarm
The alarm suppression mode. When alarms are suppressed, no
alarms will be generated if a fault situation is detected on
the trail termination point (TTP). Failures will still be
shown by the object itsSnkTtpFailure.
…
Enumerationr/w
Enumerated Values:
0notSupported
1none
2warning
3all
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.8
itsSnkTtpTConnection
A reference to the corresponding terminating connection in
the table chmgrTConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). The value is the index into that table,
i.e. the value of chmgrTConnIndex.
…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.9
itsSnkTtpDefects
Defects indicated on the trail termination point since the
last time the object was read.

los(0) Loss of Signal was detected.

lof(1) Loss of Frame was detected.

ais(2). Alarm…
Bits
Enumerated Values:
0los
1lof
2ais
3lop
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.10
itsSnkTtpFailure
A textual string describing a fault status on the trail
termination point (TTP). A configuration error is regarded as
a fault state, which is indicated when the administrative
state is down. A network related fault can …
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.11
itsSnkTtpPMReference
A reference to an object that presents performance data for
the trail termination point. The object is not part of this
MIB. If the selected local interface (itsSnkLocalIf) does not
support performance monitoring for th…
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.12
itsSnkTtpAdminStatus
The administrative state of the connection. The value
controls the desired state of the connection from the trail
termination point (TTP).

up(1). The connection shall be active.

down(2). Th…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.13
itsSnkTtpOperStatus
The operational state of the trail termination point (TTP).

up(1). The TTP is up and a connection is established to all
destinations.

down(2). The connection is down to all destinations.
…
Enumeration
Enumerated Values:
1up
2down
5dormant
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.14
itsSnkTtpRowStatus
See SNMPv2-TC. Use itsSnkTtpAdminStatus to activate and
de-activate a connection. The following values are supported:

active(1). The object always reads active.

createAndGo(4). A new concep…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.15
itsSnkTtpTConnection2
A reference to the corresponding terminating connection in
the table chmgrTConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB) for the second established connection when 1+1
protection is used where the two chan…
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.16
itsSnkTtpPSAllow
Controls if termination of an 1+1 is allowed:

true(1). Allows termination of two channels or connections
for a 1+1 protected service.

false(2). Denies termination of a second channel or
co…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.17

itsSnkIndexLookupTable

table
.1.3.6.1.4.1.2928.6.2.16.1.3.4 · 1 row entry · 1 columns
Open in standard view 
Table to lookup a DSTI to an index in the itsSnkTtpTable.
itsSnkIndexLookupEntry entry .1.3.6.1.4.1.2928.6.2.16.1.3.4.1
One conceptual row represents one lookup entry.
Indexes
itsSnkTtpLocalDsti
Column Syntax OID
itsSnkIndexLookupIndex
The value refers to the index in table itsSnkTtpTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.16.1.3.4.1.1