itsIfSdiAutoSense
NETI-ITS-MIB ·
.1.3.6.1.4.1.2928.6.2.16.1.1.7.1.2
Object
column
r/w
Enumeration
Controls whether autosense of the input/output signal shall
be enabled or not.
notSupported(0). The interface does not support autosense.
enable(1). Autosense is enabled. Input or output speed is
automatically detected and the interface speed will
automatically be configured to this detected speed regardless
of the configured capacity of the transport channel.
disable(2). Autosense is disabled. The interface is configured
to a speed in accordance with the capacity of the transported
channel.
Context
- MIB
- NETI-ITS-MIB
- OID
.1.3.6.1.4.1.2928.6.2.16.1.1.7.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- itsIfSdiEntry
- Table
- itsIfSdiTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notSupported |
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| itsIfSdiFormat Video source format. The format is presented as
`<pixels-per-line>x<lines-per-frame><i/p> @ <freq> Hz'
E.g. `1920x1080p @ 30 Hz'
The … | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.1 |
| itsIfSdiIsTimingProvider Selects whether the interface will be used primarily as as
timing provider for other interfaces on the same board. This
object is applicable only if the interface supports analog… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.3 |
| itsIfSdiReference Selects the source interface to use as timing reference for
output alignment. The source can be any interface on the
same board. The value is the relative interface number on
th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4 |
| itsIfSdiFsVDelay obsolete Adjusts the vertical output delay in number of lines.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
it… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.5 |
| itsIfSdiFsHDelay obsolete Adjusts the horizontal output delay in number of pixels.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.6 |
| itsIfSdiFsDelay Adjusts the output delay in number of nanoseconds.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
itsIf… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.7 |