itsIfSdiIsTimingProvider
NETI-ITS-MIB ·
.1.3.6.1.4.1.2928.6.2.16.1.1.7.1.3
Object
column
r/w
Enumeration
Selects whether the interface will be used primarily as as
timing provider for other interfaces on the same board. This
object is applicable only if the interface supports analog
video reference signal, or digital video reference signal, i.e.
if any of the bits `avrs' or `dvrs' is set in
itsIfCapabilities.
no(0). Used primarily as normal transport interface and
secondarily as digital timing provider. Operational state is
non-dormant and alarms are raised only when ingress or egress
connection exists.
analog(1). Used primarily as analog timing provider. Neither
ingress nor egress connections are allowed. Operational
state is non-dormant and alarms can be raised as needed.
This value can only be set if the interface supports analog
video reference signal, i.e. the `avrs' bit is set in
itsIfCapabilities.
digital(1). Used primarily as digital timing provider and
secondarily as transport interface. Operational state is
non-dormant and alarms can be raised as needed regardless
if any ingress or egress connection exists. This value can
only be set if the interface supports digital video reference
signal, i.e. the `dvrs' bit is set in itsIfCapabilities.
Context
- MIB
- NETI-ITS-MIB
- OID
.1.3.6.1.4.1.2928.6.2.16.1.1.7.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- itsIfSdiEntry
- Table
- itsIfSdiTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | no |
1 | analog |
2 | digital |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| itsIfSdiFormat Video source format. The format is presented as
`<pixels-per-line>x<lines-per-frame><i/p> @ <freq> Hz'
E.g. `1920x1080p @ 30 Hz'
The … | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.1 |
| itsIfSdiAutoSense Controls whether autosense of the input/output signal shall
be enabled or not.
notSupported(0). The interface does not support autosense.
enable(1).… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.2 |
| itsIfSdiReference Selects the source interface to use as timing reference for
output alignment. The source can be any interface on the
same board. The value is the relative interface number on
th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4 |
| itsIfSdiFsVDelay obsolete Adjusts the vertical output delay in number of lines.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
it… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.5 |
| itsIfSdiFsHDelay obsolete Adjusts the horizontal output delay in number of pixels.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.6 |
| itsIfSdiFsDelay Adjusts the output delay in number of nanoseconds.
This object is applicable only if the interface supports
reference locking, i.e. if the `ref' bit is set in
itsIf… | column | Integer32 | .1.3.6.1.4.1.2928.6.2.16.1.1.7.1.7 |