itsSrcTtpAdminStatus
NETI-ITS-MIB ·
.1.3.6.1.4.1.2928.6.2.16.1.2.3.1.11
Object
column
r/w
Enumeration
The administrative state of the connection. The value
controls the desired state of the connection from the trail
termination point (TTP). Note that the associated interface
must have capabilities that matches the properties of the
TTP to be able to successfully change the administrative
state to up(1).
up(1). The connection shall be active.
down(2). The connection shall be in-active. The active
connection is torn down and alarms are cleared.
Context
- MIB
- NETI-ITS-MIB
- OID
.1.3.6.1.4.1.2928.6.2.16.1.2.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- itsSrcTtpEntry
- Table
- itsSrcTtpTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| itsSrcTtpIndex The index in the table. The index is persistent cross reboots. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.1 |
| itsSrcTtpFailure A textual string describing a fault status on the trail
termination point (TTP). A configuration error is regarded as
a fault state, which is indicated when the administrative
sta… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.10 |
| itsSrcTtpOperStatus The operational state of the trail termination point (TTP).
up(1). The TTP is up and a connection is established to all
destinations. If the connection is 1+1 prote… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.12 |
| itsSrcTtpRowStatus See SNMPv2-TC. Use itsSrcTtpAdminStatus to activate and
de-activate a connection. The following values are supported:
active(1). The object always reads active.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.13 |
| itsSrcTtpName The textual name of the trail termination point (TTP). The
value of this object should be the name of the TTP as
assigned by the local device and should be suitable for use
in com… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.2 |
| itsSrcTtpCustomerId A customer identification number that represents the customer
or user of the trail termination point (TTP). The value could
be used e.g. for identifying the customer in Charge Dat… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.3 |
| itsSrcTtpPurpose A string describing the purpose of the TTP. The string is for
administrative use. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.4 |
| itsSrcTtpLocalIf A reference to the local interface that shall be used by the
trail termination point (TTP). The value is representing the
index in the itsIfTable. The value must refers to an exis… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.5 |
| itsSrcTtpLocalDsti The DSTI (DTM Service Type Instance) for the source trail
termination point. The value is used by the connection to
refer to this trail termination point. The DSTI must be unique
… | column | NETI-CHMGR-MIBDsti | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.6 |
| itsSrcTtpMode The TTP mode. The associated interface, itsSrcTtpLocalIf,
must have the capability to support the property when the
administrative state of the TTP is set to up.
un… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.7 |
| itsSrcTtpODescription A reference to the corresponding description of the
connection in the chmgrODescriptionTable in the Channel
Manager MIB (NETI-CHMGR-MIB). The value is the index into the
table, i.… | column | Unsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.8 |
| itsSrcTtpOConnection A reference to the corresponding originating connection in
the table chmgrOConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). When an originating connection is
establish… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.2.3.1.9 |