itsSnkTtpTConnection2
NETI-ITS-MIB ·
.1.3.6.1.4.1.2928.6.2.16.1.3.3.1.16
Object
column
Integer32
A reference to the corresponding terminating connection in
the table chmgrTConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB) for the second established connection when 1+1
protection is used where the two channel originate from two
different trail termination points (TTPs). If the two
channels originate from the same TTP, then only one entry is
used in the chmgrTConnectionTable, referenced by
itsSnkTtpTConnection, and the value of this object is then
-1.
The value is the index into the table, i.e. the value of
chmgrTConnIndex.
Context
- MIB
- NETI-ITS-MIB
- OID
.1.3.6.1.4.1.2928.6.2.16.1.3.3.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- itsSnkTtpEntry
- Table
- itsSnkTtpTable
- Siblings
- 16
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| itsSnkTtpIndex The index in the table. The index is persistent across reboots. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.1 |
| itsSnkTtpDefects Defects indicated on the trail termination point since the
last time the object was read.
los(0) Loss of Signal was detected.
lof(1) Loss of Frame wa… | column | Bits | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.10 |
| itsSnkTtpFailure A textual string describing a fault status on the trail
termination point (TTP). A configuration error is regarded as
a fault state, which is indicated when the administrative
sta… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.11 |
| itsSnkTtpPMReference A reference to an object that presents performance data for
the trail termination point. The object is not part of this
MIB. If the selected local interface (itsSnkLocalIf) does n… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.12 |
| itsSnkTtpAdminStatus The administrative state of the connection. The value
controls the desired state of the connection from the trail
termination point (TTP).
up(1). The connection sha… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.13 |
| itsSnkTtpOperStatus The operational state of the trail termination point (TTP).
up(1). The TTP is up and a connection is established to all
destinations.
down(2). The co… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.14 |
| itsSnkTtpRowStatus See SNMPv2-TC. Use itsSnkTtpAdminStatus to activate and
de-activate a connection. The following values are supported:
active(1). The object always reads active.
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.15 |
| itsSnkTtpPSAllow Controls if termination of an 1+1 is allowed:
true(1). Allows termination of two channels or connections
for a 1+1 protected service.
false(2). Deni… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.17 |
| itsSnkTtpName The textual name of the trail termination point (TTP). The
value of this object should be the name of the TTP as
assigned by the local device and should be suitable for use
in com… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.2 |
| itsSnkTtpCustomerId A customer identification number that represents the customer
or user of the trail termination point (TTP). The value could
be used e.g. for identifying the customer in Charge Dat… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.3 |
| itsSnkTtpPurpose A string describing the purpose of the TTP. The object use is
for administrative purpose. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.4 |
| itsSnkTtpLocalIf A reference to the local interface that shall be used by the
trail termination point (TTP). The value is representing the
index in the itsIfTable. The value must point to an exist… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.5 |
| itsSnkTtpLocalDsti The DSTI (DTM Service Type Instance) for the sink trail
termination point. The value is used by the connection to
refer to this trail termination point. The DSTI must be
unique am… | column | NETI-CHMGR-MIBDsti | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.6 |
| itsSnkTtpPSActiveChannel The channel to use on a 1+1 protected connection. When a
connection is being established, the first established
channel will become the active channel. The device will
switch to t… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.7 |
| itsSnkTtpSuppressAlarm The alarm suppression mode. When alarms are suppressed, no
alarms will be generated if a fault situation is detected on
the trail termination point (TTP). Failures will still be
s… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.8 |
| itsSnkTtpTConnection A reference to the corresponding terminating connection in
the table chmgrTConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). The value is the index into that table,
i.… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.16.1.3.3.1.9 |