HUAWEI-ADSL-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
32
Rows
32
Columns
468

hwadslAturChanInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.1 · 1 row entry · 10 columns
Open in standard view 
This table provides the channel parameters of the ATUR end of each port.
The index of this table is ifIndex.
hwadslAturChanInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.1.1
This table provides the channel parameters of the ATUR end of each port.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslAturChanCurrINPInfo
Indicates Impulse Noise Protection on upstream direction.
The value multiply 1/10000 is the real value.
Unit: DMT Symbol
DMT SymbolSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.1
hwadslAturChanRsSymbolsInfo
Indicates Reed-Solomon symbols on upstream direction.
The value multiply 1/10000 is the real value.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.2
hwadslAturChanRsRedundancyInfo
Indicates Reed-Solomon redundancy on upstream direction.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.3
hwadslAturChanRsDepthInfo
Indicates Reed-Solomon depth on upstream direction.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.4
hwadslAturChanSymbolLengthInfo
Indicates the Bit Number of the DMT Symbol on upstream direction.
Unit: bit
bitSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.5
hwadslAturChanPhyRrrcBitsInfo
The bits in the channel that used to retransmission on upstream direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.6
hwadslAturChanPhyRtxQueueInfo
Queues in send buffer on upstream direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.7
hwadslAturChanRsSizeInfo
Indicates Reed-Solomon Codeword Size on upstream direction.
Range: 0-255
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.8
hwadslAturChanCodeGainInfo
Indicates Code Gain on upstream direction.
It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.9
hwadslAturChanL2NetDataRate
In L2 state, this parameter reports the Net Data Rate in low power state.
The data rate is coded in steps of 1000 bit/s.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.1.1.10

hwadslAturPhysInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.2 · 1 row entry · 4 columns
Open in standard view 
This object provides the physical layer parameters of each ATUR.
The index of this table is ifIndex.
hwadslAturPhysInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.2.1
This object provides the physical layer parameters of each ATUR.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslAturTransmissionCapabilitiesInfo
The ATU transmission system capability list of the different
coding types. It is coded in a bit-map representation with 1
or more bits set. A bit set to '1' means that the ATU
supports the respective coding. The value m…
ADSL2-LINE-TC-MIBAdsl2TransmissionModeType
Textual Convention: ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Bits
Type Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapped
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapped
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53reserved13
54reserved14
55reserved15
 .1.3.6.1.4.1.2011.6.31.1.2.1.1
hwAdslAturCurrSignalAtnInfo
The signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R.
Range: 0-630
Unit: tenth dB
tenth dBUnsigned32
Constraints:
range: 0-630
 .1.3.6.1.4.1.2011.6.31.1.2.1.2
hwadslAturInvG994VendorId
The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.31.1.2.1.3
hwadslAturLInvSelfTestResult
The ATU self-test result, coded as a 32-bit value. The
most significant octet of the result is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discretiona…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.2.1.4

hwadslAtucChanInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.3 · 1 row entry · 13 columns
Open in standard view 
This object provides the channel parameters of each ATUC.
The index of this table is ifIndex.
hwadslAtucChanInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.3.1
This object provides the channel parameters of each ATUC.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslAtucChanCurrINPInfo
Indicates Impulse Noise Protection on downstream direction.
The value multiply 1/10000 is the real value.
If retransmission is used in a given transmit direction, this parameter reports
the actual impulse noise protect…
DMT SymbolSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.1
hwadslAtucChanRsSymbolsInfo
Indicates Reed-Solomon symbols on downstream direction.
The value multiply 1/10000 is the real value.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.2
hwadslAtucChanRsRedundancyInfo
Indicates Reed-Solomon redundancy on downstream direction.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.3
hwadslAtucChanRsDepthInfo
Indicates Reed-Solomon depth on downstream direction.
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.4
hwadslAtucChanSymbolLengthInfo
Indicates the Bit Number of the DMT Symbol on downstream direction.
Unit: bit
bitSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.5
hwadslAtucChanPhyRrrcBitsInfo
The bits in the channel that used to retransmission on downstream direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.6
hwadslAtucChanPhyRtxQueueInfo
Queues in send buffer on downstream direction.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.7
hwadslAtucChanRsSizeInfo
Indicates Reed-Solomon Codeword Size on downstream direction.
Range: 0-255
Unit: byte
byteSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.8
hwadslAtucChanCodeGainInfo
Indicates Code Gain on downstream direction.
It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.9
hwadslAtucChanPcbInfo
Indicates Power Cut-back on downstream direction.
It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB)
Unit: tenth dB
tenth dBSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.10
hwadslAtucChanActNetDataRate
Independent whether retransmission is used or not in a given transmit direction:
In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2)
at which the bearer channel is operat…
bits/secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.11
hwadslAtucChanActINPAgainstREIN
If retransmission is used in a given transmit direction,
this parameter reports the actual impulse noise protection (INP) against
REIN (under specific conditions detailed in G.998.4) on the bearer channel
in the L0 s…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.12
hwadslAtucChanL2NetDataRate
In L2 state, this parameter reports the Net Data Rate in low power state.
The data rate is coded in steps of 1000 bit/s.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.3.1.13

hwadslLineConfProfileCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.4 · 1 row entry · 4 columns
Open in standard view 
This table contains information on the ADSL line configuration.
The index of this table is adslLineConfProfileName.
hwadslLineConfProfileCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.4.1
This table contains information on the ADSL line configuration.
The index of this entry is adslLineConfProfileName.
Indexes
ADSL-LINE-MIBadslLineConfProfileName
Column Syntax OID
hwAdslAtucConfDownBitSwapCfg
Enables and disables the down bitswap of a template.
Options:
1. enabled(1) - Indicates that the downstream bit swap is enabled
2. disabled(2) - Indicates that the downstream bit swap is disabled
Default: enabled(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.4.1.1
hwAdslAtucConfUpBitSwapCfg
Enables and disables the up bitswap of a template.
Options:
1. enabled(1) - Indicates that the upstream bit swap is enabled
2. disabled(2) - Indicates that the upstream bit swap is disabled
Default: enabled(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.4.1.2
hwAdslTrellionsModeEnableCfg
Enables and disables the Trellions mode.
Options:
1. enabled(1) - Indicates that the trellis coding is enabled.
2. disabled(2) - Indicates that the trellis coding is disabled.
Default: enabled(1)
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.4.1.3
hwAdslTransmissionModeCfg
Indicates the transmission mode of this channel.
Options:
1. all(1) - All (G992.1, G992.2, T1.413)(Default)
2. fullRate(2) - Full rate(G992.1 or T1.413)
3. gliteOnly(3) - G992.2(g.lite) only
4. t1…
Enumerationr/w
Enumerated Values:
1all
2fullRate
3gliteOnly
4t1413Only
5gdmtOnly
6ghs
7g992Dot1
8g992Dot2
9g992Dot3
10g992Dot4
11g992Dot5
12adslAllOnly
13adslAndAdsl2
 .1.3.6.1.4.1.2011.6.31.1.4.1.4

hwAdslLinePvcCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.5 · 1 row entry · 9 columns
Open in standard view 
PVC configuration table of the ADSL port.
The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.
hwAdslLinePvcCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.5.1
PVC configuration table of the ADSL port.
The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.
Indexes
IF-MIBifIndex HUAWEI-ADSL-MIBhwAdsllinePvcVpi HUAWEI-ADSL-MIBhwAdslLinePvcVci
Column Syntax OID
hwAdslLinePvcVlanIdCfg
The VLAN ID of the adsl line PVC.
Range: 1-4000
Integer32r/w
Constraints:
range: 1-4000
 .1.3.6.1.4.1.2011.6.31.1.5.1.3
hwAdslLinePvcPriorityCfg
The Priority value of the adsl line PVC.
Range: 0-7
Default: 0
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.31.1.5.1.4
hwAdslLinePvcDsBandCfg
The down stream band of the adsl line PVC.
Range: 0-450
Default: 0
Integer32r/w
Constraints:
range: 0-450
 .1.3.6.1.4.1.2011.6.31.1.5.1.5
hwAdslLinePvcUsBandCfg
The up stream band of the adsl line PVC.
Range: 0-450
Integer32r/w
Constraints:
range: 0-450
 .1.3.6.1.4.1.2011.6.31.1.5.1.6
hwAdslLinePvcMCastEnableCfg
This object allows the adsl line PVC to support multicast.
Options:
1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast
2. disable(2) - Indicates that the PVC of the ADSL port is…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.5.1.7
hwAdslLinePvcIGMPEnableCfg
This object allows the adsl line PVC to support IGMP.
Options:
1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP
2. disable(2) - Indicates that the PVC of the ADSL port is disabled to s…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.5.1.8
hwAdslLinePvcIndexCfg
The index of the adsl line PVC.
Range: 1-8
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.2011.6.31.1.5.1.9
hwAdslLinePvcConnectTypeCfg
The Connected type of the adsl line PVC
Options:
1. auto(0) - The Connected type of the adsl line PVC is auto
2. llc1483B(1) - The Connected type of the adsl line PVC is llc1483B
3. pppoaLLC(2) - The Connected type…
Enumeration
Enumerated Values:
0auto
1llc1483B
2pppoaLLC
3pppoaVcmux
4ipoaLLc
5ipoaVcmux
 .1.3.6.1.4.1.2011.6.31.1.5.1.10
hwAdslLinePvcRowStatusCfg
Row status. Add or delete a table item.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.31.1.5.1.11

hwadslLineCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.6 · 1 row entry · 2 columns
Open in standard view 
This table includes common attributes describing both ends of the line.
The index of this table is ifIndex.
hwadslLineCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.6.1
This table includes common attributes describing both ends of the line.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslLineExtConfProfileCfg
The value of this object identifies the row
in the ADSL Extend Line Configuration Profile Table,
(adslLineExtConfProfileTable), which applies to this
ADSL line, and channels if applicable.

NULL - indicate…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.6.1.1
hwadslLineDynamicProfileCfg
The value of this object identifies the row
in the ADSL Dynamic Profile Table,which applies to this
ADSL line, and channels if applicable.

NULL - indicates that there is no Dynamic profile
bound to this …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.6.1.2

hwAdslLineBitAllocationInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.7 · 1 row entry · 5 columns
Open in standard view 
This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation
information for the current link. This information can be used to determine 
whether a given sub-carrier loop has sufficient margin to support ADSL 
data rates, and possibly to determine whether certain specific types 
of interference or line attenuation exist. The bit allocation information 
are only valid when the ATU-C is in the C-ACTIVE state.
The index of this table is ifIndex.
hwAdslLineBitAllocationInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.7.1
This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation
information for the current link. This information can be used to determine
whether a given sub-carrier loop has sufficient margin to support …
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslLineDownStreamBitsPerFrameInfo
Number of bits required per frame in the downstream data path for the
current configuration.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.7.1.1
hwAdslLineUpStreamBitsPerFrameInfo
Number of bits required per frame in the upstream data path for the
current configuration.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.7.1.2
hwAdslLineDownStreamBitAllocLowInfo
when used to Adsl board
This object contains the first 128 downstream sub-carrier bit allocations
(sub-carrier # 1-128). This object is 64 bytes in length, where each byte
contains 2 sub-carrier values.
…
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.6.31.1.7.1.3
hwAdslLineDownStreamBitAllocHighInfo
when used to Adsl board
This object contains the second 128 downstream sub-carrier bit allocations
(sub-carrier # 129-256). This object is 64 bytes in length, where each byte
contains 2 sub-carrier values.
…
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.6.31.1.7.1.4
hwAdslLineUpStreamBitAllocInfo
when used to Adsl board
This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64).
This Object is 32 bytes in length, where each byte contains 2 sub-carrier values.

Byte 1 - 3…
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2011.6.31.1.7.1.5

hwXdslPortCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.8 · 1 row entry · 21 columns
Open in standard view 
This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information.
Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports
The index of this table is ifIndex.
hwXdslPortCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.8.1
This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information.
Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwXdslPortMaxMacLearnCfg
Set Max MAC count on the xDSL port.
Range: 0-255
Default: 255
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.8.1.1
hwXdslPortRateMonitorThresholdCfg
Set Port monitoring rate threshold percent. Including upstream and downstream.
Range: 0-100
Default: 0
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.31.1.8.1.2
hwXdslPortUpThresholdTxRateCfg
Set Port monitoring upstream rate threshold value.
Default: 0
Unit:bps
bpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.3
hwXdslPortDownThresholdTxRateCfg
Set Port monitoring downstream rate threshold value.
Default: 0
Unit:bps
bpsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.4
hwXdslPortRateMonitorAlarmEnableCfg
Enables or disables port rate monitor alarm.
Options:
1. enabled(1) - Enables port rate monitor alarm
2. disabled(2) - Disables port rate monitor alarm
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.8.1.5
hwXdslPortUpTimeCfg
Duration of the xDSL port activation
Unit: second
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.6
hwXdslPortNTEPowerStatusCfg
NTE power status, this object is defaulted off(2).
Options:
1. on(1) - NTE power status is on
2. off(2) - NTE power status is off
3. unknown(3) - NTE power is in unknown status
Enumeration
Enumerated Values:
1on
2off
3unknown
 .1.3.6.1.4.1.2011.6.31.1.8.1.7
hwXdslPortCurrentUpRateCfg
Xdsl port current upstream value.
Range: 0-30000
Default: 0
Integer32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.2011.6.31.1.8.1.8
hwXdslPortCurrentDownRateCfg
Xdsl port current downstream value.
Range: 0-30000
Default: 0
Integer32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.2011.6.31.1.8.1.9
hwXdslPortFarEndRunStateCfg
Remote running status of the xDSL port. This object is defaulted unknown(1).
Options:
1. unknown(1) - Unknown status
2. noModem(2) - Port is not connected to modem
3. handshake(3) - Handshake status
4. showtime(4) …
Enumeration
Enumerated Values:
1unknown
2noModem
3handshake
4showtime
 .1.3.6.1.4.1.2011.6.31.1.8.1.10
hwXdslPortPowerStateCfg
Xdsl port power state.
Options:
1. l0(1) - Full-on state
2. l2(2) - Low power state
3. l3(3) - Idle state
4. l1(4) - Low power state
5. invalidValue(-1) - Invalid state …
Enumeration
Enumerated Values:
-1invalidValue
1l0
2l2
3l3
4l1
 .1.3.6.1.4.1.2011.6.31.1.8.1.11
hwXdslPortUpCntCfg
The up counts of xDSL port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.12
hwXdslPortUpCntAdminStatusCfg
Admin the up counts of xDSL port.
Options:
1. reset(0) - Reset the up counts of xDSL port
Enumerationr/w
Enumerated Values:
0reset
 .1.3.6.1.4.1.2011.6.31.1.8.1.13
hwXdslPortLastUpTimeCfg
Last up time of a xDSL port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.8.1.14
hwXdslPortLastDownTimeCfg
Last down time of a xDSL port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.8.1.15
hwXdslPortClearUpCntTimeCfg
The time when up counts of a xDSL port is cleared.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.8.1.16
hwXdslPortRetrainCntCfg
The retrain counts of xDSL Line.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.17
hwXdslPortLastRetrainReasonCfg
The last retrain reson of xDSL Line, coded as bit mask.
Only one bit can be set valid, all bits set valid means invalid retrain reason.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.8.1.18
hwXdslPortLoopFlagCfg
Loop flag.
Options:
1. false(0) - No loop
2. true (1) - Loop
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.2011.6.31.1.8.1.19
hwXdslPortUpThresholdCfg
Set Port monitoring upstream rate threshold percent value.
Range: 0-100
Default: 0
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.31.1.8.1.20
hwXdslPortDownThresholdCfg
Set Port monitoring downstream rate threshold percent value.
Range: 0-100
Default: 0
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.31.1.8.1.21

hwAdslLinePreActParaInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.9 · 1 row entry · 7 columns
Open in standard view 
This table provides one row for each ADSL PORT.
Each row contains the preactived parameters.
The index of this table is ifIndex.
hwAdslLinePreActParaInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.9.1
This table provides one row for each ADSL PORT.
Each row contains the preactived parameters.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslAtucPrevSnrMgnInfo
Noise Margin as seen by this ATU-C at the
time of the last adslAtucRateChangeTrap event.
Unit: tenth dB
tenth dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.9.1.1
hwAdslAturPrevSnrMgnInfo
Noise Margin as seen by this ATU-R at
the time of the last adslAtucRateChangeTrap event.
Unit: tenth dB
tenth dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.9.1.2
hwAdslAtucPrevAttainableRateInfo
Indicates the maximum attainable data rate
by the ATU-C at the time of the last
adslAtucRateChangeTrap event.
Unit: bps
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.9.1.3
hwAdslAturPrevAttainableRateInfo
Indicates the maximum attainable data rate
by the ATU-R at the time of the last
adslAtucRateChangeTrap event.
Unit: bps
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.9.1.4
hwAdslAtucPreAtnInfo
Measured difference in the total power
transmitted as seen by this ATU-C at the time
of the last adslAtucRateChangeTrap event.
Unit: tenth dB
tenth dBSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.9.1.5
hwAdslAturPreAtnInfo
Measured difference in the total power
transmitted as seen by this ATU-R at the time of the
last adslAtucRateChangeTrap event.
Unit: tenth dB
tenth dBSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.9.1.6
hwAdslPreActiveTimeInfo
The last time at that the port was activated.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.9.1.7

hwPortThreePriorityCfgTable

table obsolete
.1.3.6.1.4.1.2011.6.31.1.10 · 1 row entry · 1 columns
Open in standard view 
Adsl port three priority table.
The index of this table is ifIndex.
hwPortThreePriorityCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.10.1
Adsl port three priority table.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwPortThreePriorityEnableCfg obsolete
Three Priority status of the interface.
Options:
1. enable(1) - Adsl port three priority is enabled
2. disable(2) - Adsl port three priority is disabled
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.10.1.1

hwSlotMacMaxNoLimitCfgTable

table obsolete
.1.3.6.1.4.1.2011.6.31.1.11 · 1 row entry · 1 columns
Open in standard view 
Max mac learning no limit table.
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwSlotMacMaxNoLimitCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.11.1
Max mac learning no limit table.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwSlotMacMaxNoLimitEnableCfg obsolete
This object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses.
Options:
1. enable(1) - Don't limit the max NO. of learning mac addresses in the slot
2. disable(2) - L…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.11.1.1

hwXdslPortStateStatisticInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.12 · 1 row entry · 11 columns
Open in standard view 
XDSL port state staticstic table.
Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards
The indexes of this table are ifType, hwFrameIndex, hwSlotIndex.
hwXdslPortStateStatisticInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.12.1
XDSL port state staticstic table.
Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards
The indexes of this entry are ifTyp…
Indexes
RFC1213-MIBifType HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwXdslPortStatePortNumberInfo
This object is port number of one slot.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.1
hwXdslPortStateBitmapListInfo
The type of port status:
2 failed;
8 testing;
9 activated;
10 activating;
11 deactivated;
18 localloopback;
19 remoteloopback;
20 blocked;
37 utopialoopback;
38 afeloopback;
39 hybridloopback;
255 unknow…
OctetString .1.3.6.1.4.1.2011.6.31.1.12.1.2
hwXdslTotalOfActivatedPortsInfo
The total of the activated ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.3
hwXdslTotalOfDeactivatedPortsInfo
The total of the deactivated ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.4
hwXdslTotalOfActivatingPortsInfo
The total of the activating ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.5
hwXdslTotalOfTestingPortsInfo
The total of the Testing ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.6
hwXdslTotalOfBlockedPortsInfo
The total of the blocked ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.7
hwXdslTotalOfLocalLoopbackPortsInfo
The total of the local testing ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.8
hwXdslTotalOfRemoteLoopbackPortsInfo
The total of the remote testing ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.9
hwXdslTotalOfFailedPortsInfo
The total of the failed ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.10
hwXdslTotalOfUnknownPortsInfo
The total of the unknown xDSL ports.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.12.1.11

hwadslLineExtConfProfileCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.13 · 1 row entry · 76 columns
Open in standard view 
This table contains information on the ADSL extend line
configuration. One entry in this table reflects a
extend line profile defined by a manager which can be used to
configure the ADSL line.
The index of this table is hwadslLineExtConfProfileNameCfg.
hwadslLineExtConfProfileCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.13.1
This table contains information on the ADSL extend line
configuration. One entry in this table reflects a
extend line profile defined by a manager which can be used to
configure the ADSL line.
The index of this entry is…
Indexes
hwadslLineExtConfProfileNameCfg
Column Syntax OID
hwadslLineExtConfProfileNameCfg
This object is used by the hwadslLineExtConfProfileTable
in order to identify a row of this table.
Indicates the name of the extended line profile.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.31.1.13.1.1
hwadslLineDisableToneSection1BeginCfg
The begin index of the first section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.2
hwadslLineDisableToneSection1EndCfg
The end index of the first section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.3
hwadslLineDisableToneSection1FlagCfg
The enable flag of the first section.
Options:
1. enabled(1) - The first tone section is enabled
2. disabled(2) - The first tone section is disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.13.1.4
hwadslLineDisableToneSection2BeginCfg
The begin index of the second section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.5
hwadslLineDisableToneSection2EndCfg
The end index of the second section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.6
hwadslLineDisableToneSection2FlagCfg
The enable flag of the second section.
Options:
1. enabled(1) - The second tone section is enabled
2. disabled(2) - The second tone section is disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.13.1.7
hwadslLineDisableToneSection3BeginCfg
The begin index of the third section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.8
hwadslLineDisableToneSection3EndCfg
The end index of the third section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.9
hwadslLineDisableToneSection3FlagCfg
The enable flag of the third section.
Options:
1. enabled(1) - The third tone section is enabled
2. disabled(2) - The third tone section is disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.13.1.10
hwadslLineDisableToneSection4BeginCfg
The begin index of the fourth section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.11
hwadslLineDisableToneSection4EndCfg
The end index of the fourth section.
Range: 0-511
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.12
hwadslLineDisableToneSection4FlagCfg
The enable flag of the fourth section.
Options:
1. enabled(1) - The fourth tone section is enabled
2. disabled(2) - The fourth tone section is disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.13.1.13
hwadsl2ChConfProfMinProtectionDsCfg
If retransmission is not used in downstream direction,this parameter
is minimum impulse noise protection on downstream direction. The
minimum impulse noise protection for the bearer channel, expressed
in symbols. The …
HUAWEI-ADSL-MIBHWADSLSYMBOLPROTECTIONr/w .1.3.6.1.4.1.2011.6.31.1.13.1.14
hwadsl2ChConfProfMinProtectionUsCfg
If retransmission is not used in upstream direction,this parameter
is minimum impulse noise protection on upstream direction. The
minimum impulse noise protection for the bearer channel, expressed
in symbols. The para…
HUAWEI-ADSL-MIBHWADSLSYMBOLPROTECTIONr/w .1.3.6.1.4.1.2011.6.31.1.13.1.15
hwAdslExtDsMinTrainSnrMgnCfg
Maximum Trainning Margin in downstream.
Range: 0-310
Default: 30
Unit: tenth dB
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.13.1.16
hwAdslExtUsMinTrainSnrMgnCfg
Maximum Trainning Margin in upstream.
Range: 0-310
Default: 30
Unit: tenth dB
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.13.1.17
hwAdslExtDsMaxPsdCfg
Maximum PSD margin in downstream.
dBm/HzInteger32r/w
Constraints:
range: -60--30
 .1.3.6.1.4.1.2011.6.31.1.13.1.18
hwadsl2TSSiPsdMaskDsCfg
The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G992.3 or G992.5 and it may
impose PSD restrictions (breakpoints) in addition to the
Limit PSD mask defined in G992.5.
Th…
ADSL2-LINE-TC-MIBAdsl2PsdMaskDsr/w
Textual Convention: ADSL2-LINE-TC-MIBAdsl2PsdMaskDs OctetString
Type Constraints:
range: 0..96
 .1.3.6.1.4.1.2011.6.31.1.13.1.19
hwadsl2TranMissionStardardMaskCfg
The transmission stardard mask .
The Mask bit and the corresponding Transmission Standard:
0x 1 1 1 1 1 1
ETSI T1.413 G992.5 G992.3 G992.2 G992.1
The Default BitMask: 0X0.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.13.1.20
hwadsl2TransMissionAnnexMaskCfg
The transMission annex Mask.
The Mask bit and the corresponding Transmission Annex:
0x 1 1 1 1 1
Annex .J Annex .M Annex .L Annex .B Annex .A
The Default BitMask: 0X0.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.13.1.21
hwadsl2TransMissionAnnexMScopeCfg
Annex M expand scope:
1-Tone Index(7~32)
2-Tone Index(7~36)
3-Tone Index(7~40)
4-Tone Index(7~44)
5-Tone Index(7~48)
6-Tone Index(7~52)
7-Tone Index(7~56)
8-Tone Index(7~60)
9-Tone Index(7~64)
-1-invalidValue
HUAWEI-ADSL-MIBHWADSL2ANNEXMSCOPEr/w .1.3.6.1.4.1.2011.6.31.1.13.1.22
hwadsl2L2ModeStateCfg
The state of L2 power management mode.
Options:
1. disabled(1) - The L2 power management mode is disabled
2. enabled(2) - The L2 power management mode is enabled
3. forced(3) - The L2 power management mode is forced
…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3forced
 .1.3.6.1.4.1.2011.6.31.1.13.1.23
hwadsl2L2ModeMinDataRateCfg
Minimum data rate in L2 mode.
Range: 128-16384
Default: 256
Unit: Kbps
KbpsInteger32r/w
Constraints:
range: 128-16384
 .1.3.6.1.4.1.2011.6.31.1.13.1.24
hwadsl2L2ModeMaxDataRateCfg
Maximum data rate in L2 mode.
Range: 128-16384
Default: 1024
Unit: Kbps
KbpsInteger32r/w
Constraints:
range: 128-16384
 .1.3.6.1.4.1.2011.6.31.1.13.1.25
hwadsl2L2ModePayloadRateThresholdCfg
Threshold for the Payload Rate Ratio.
Range: 128-16384
Default: 128
Unit: Kbps
KbpsInteger32r/w
Constraints:
range: 128-16384
 .1.3.6.1.4.1.2011.6.31.1.13.1.26
hwadsl2L2ModeGuardTimeCfg
Guard time before entering L2 mode.
Range: 0-1024
Default: 60
Unit: seconds
secondsInteger32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.31.1.13.1.27
hwadsl2L2ModeIntervalTimeCfg
The minimum interval between two records of L2 mode.
Range: 0-255
Default: 255
Unit: seconds
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.28
hwadsl2L2ModeIntervalPowerValueCfg
Maximum aggregate transmit power reduction per L2 request or L2 power trim.
Range: 0-31
Default: 3
Unit: db
dbInteger32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.31.1.13.1.29
hwadsl2L2ModeTotalPowerValueCfg
Total maximum aggregate transmit power reduction in L2.
Range: 0-31
Default: 9
Unit: db
dbInteger32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.31.1.13.1.30
hwadslExtUsPhyRcontrolCfg
To enable or disable the PHY-R function on upstream direction.
Options:
1. enable(1) - The PHY-R function on upstream direction is enabled
2. disable(2) - The PHY-R function on upstream direction is disabled
Default: …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.13.1.31
hwadslExtUsINPmaxCfg
Maximum Impulse Noise Protection on upstream direction.
The parameter can take the following values:
noProtection(1),
halfSymbol(2),
singleSymbol(3),
twoSymbols(4),
threeSymbols(5),
fourSymbols(6),
fiveSymbols(7),
sixSy…
DMT SymbolADSL2-LINE-TC-MIBAdsl2SymbolProtectionr/w
Textual Convention: ADSL2-LINE-TC-MIBAdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.13.1.32
hwadslExtUsMinRtxRatioCfg
Minimum rtx ratio on upstream direction.
Range: 0-255
Default: 0
Unit: 1/256
1/256Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.33
hwadslExtUsMinRSoverheadCfg
The minimum value of R/N on upstream direction.
Range: 0-128
Default: 0
Unit: 1/256
1/256Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.31.1.13.1.34
hwadslExtDsPhyRcontrolCfg
To enable or disable the PHY-R function on downstream direction.
Options:
1. enable(1) - The PHY-R function on downstream direction is enabled
2. disable(2) - The PHY-R function on downstream direction is disabled
Def…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.13.1.35
hwadslExtDsINPmaxCfg
Maximum Impulse Noise Protection on downstream direction.
The parameter can take the following values:
noProtection(1),
halfSymbol(2),
singleSymbol(3),
twoSymbols(4),
threeSymbols(5),
fourSymbols(6),
fiveSymbols(7),
six…
DMT SymbolADSL2-LINE-TC-MIBAdsl2SymbolProtectionr/w
Textual Convention: ADSL2-LINE-TC-MIBAdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.13.1.36
hwadslExtDsMinRtxRatioCfg
Minimum rtx ratio on downstream direction.
Range: 0-255
Default: 0
Unit: 1/256
1/256Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.37
hwadslExtDsMinRSoverheadCfg
The minimum value of R/N on downstream direction.
Range: 0-128
Default: 0
Unit: 1/256
1/256Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.31.1.13.1.38
hwadsl2TSSiPsdMaskUsCfg
The upstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G992.3 or G992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G992.5.
This i…
ADSL2-LINE-TC-MIBAdsl2PsdMaskUsr/w
Textual Convention: ADSL2-LINE-TC-MIBAdsl2PsdMaskUs OctetString
Type Constraints:
range: 0..12
 .1.3.6.1.4.1.2011.6.31.1.13.1.39
hwadslLConfProfAdslModeCfg
The ADSL2 management model specified includes an ADSL Mode
attribute which identifies an instance of ADSL Mode-Specific
PSD Configuration object in the ADSL Line Profile. The
following classes of ADSL operating mode are…
Enumerationr/w
Enumerated Values:
-1invalidValue
1defMode
2adsl
3adsl2Pots
4adsl2Isdn
5adsl2PlusPots
6adsl2PlusIsdn
7adsl2ReachExtended
 .1.3.6.1.4.1.2011.6.31.1.13.1.40
hwadslLineExtConfProfileRowStatusCfg
This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
'active'. When 'active' is set, the system
will validate the profile.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.31.1.13.1.41
hwadsl2L2ModeL2TimeCfg
This minimum time (in seconds) between an entry into the
L2 state and the first power trim in the L2 state and between
two consecutive power trims in the L2 State.
It ranges from 0 to 255 seconds.
Range: 0-255
Default:…
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.42
hwadslLineExtConfProfRtxModeDs
The mode of operation of G.998.4 retransmission in downstream direction.
Options:
1. forbidden(0) - G.998.4 retransmission not allowed.
2. preferred(1) - G.998.4 retr…
Enumerationr/w
Enumerated Values:
0forbidden
1preferred
2forced
3testmode
 .1.3.6.1.4.1.2011.6.31.1.13.1.43
hwadslLineExtConfProfLeftrThreshDs
If retransmission is used in downstream direction, this parameter specifies the
threshold for declaring a near-end leftr defect. The value is coded as a fraction of the
NDR with valid range from 0.01 to 0.99 with incr…
0.01Unsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.2011.6.31.1.13.1.44
hwadslLineExtConfProfMinEtrRtxDs
If retransmission is used in downstream direction, this parameter specifies the
minimum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.
bits/secondUnsigned32r/w
Constraints:
range: 32000-32000000
 .1.3.6.1.4.1.2011.6.31.1.13.1.45
hwadslLineExtConfProfMaxEtrRtxDs
If retransmission is used in downstream direction, this parameter specifies the
maxmum expected throughput for the bearer channel.The values range in steps of
1000 bit/s.
bits/secondUnsigned32r/w
Constraints:
range: 32000-32000000
 .1.3.6.1.4.1.2011.6.31.1.13.1.46
hwadslLineExtConfProfMaxNdrRtxDs
If retransmission is used in downstream direction, this parameter specifies the
maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
bits/secondUnsigned32r/w
Constraints:
range: 32000-32000000
 .1.3.6.1.4.1.2011.6.31.1.13.1.47
hwadslLineExtConfProfMaxDelayRtxDs
If retransmission is used in downstream direction, this parameter specifies
the maximum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges f…
millisecondsUnsigned32r/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.2011.6.31.1.13.1.48
hwadslLineExtConfProfMinDelayRtxDs
If retransmission is used in downstream direction, this parameter specifies
the minimum for the instantaneous delay due to the effect of retransmission only
(see G.998.4 for detailed specification). The delay ranges f…
millisecondsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.31.1.13.1.49
hwadslLineExtConfProfMinInpShineRtxDs
If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against SHINE for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of …
symbolsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.31.1.13.1.50
hwadslLineExtConfProfShineRatioRtxDs
If retransmission is used in downstream direction, this parameter specifies
the SHINE ratio (detailed definition see G.998.4).
The values range from 0 to 0.100 in increments of 0.001.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.31.1.13.1.51
hwadslLineExtConfProfMinInpReinRtxDs
If retransmission is used in downstream direction, this parameter specifies
the minimum impulse noise protection against REIN for the bearer channel if it is
transported over DMT symbols with a subcarrier spacing of 4…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.31.1.13.1.52
hwadslLineExtConfProfIatReinRtxDs
If retransmission is used in downstream direction, this parameter specifies
the inter-arrival time that shall be assumed for REIN protection.
Options:
1. frequency100Hz(0) - an inter-arrival time derived from a REIN …
Enumerationr/w
Enumerated Values:
0frequency100Hz
1frequency120Hz
 .1.3.6.1.4.1.2011.6.31.1.13.1.53
hwadsl2LExtLineProfReferenceClock
This object configures the clock reference for the ATU-C
in an ADSL line. Represented as an enumeration.
Options:
1. freeRun(1) - Indicates the local clock
2. system(2) - Indicates the system clock
Enumerationr/w
Enumerated Values:
1freeRun
2system
 .1.3.6.1.4.1.2011.6.31.1.13.1.54
hwadsl2LExtLineProfRfiBands
The RFI notch parameter.
It is a string consist of begin tone index,
end tone index.
This is a string of 4 groups of values in the following
structure:
Octets 0+1 - Index of start sub-carrier used in the context
…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.31.1.13.1.55
hwadsl2LExtLineProfDpboEPsd
This parameter defines the PSD mask that is assumed to be permitted at the exchange.
This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints
for DPBOEPSD is 16.
This is a string of 16 p…
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2011.6.31.1.13.1.56
hwadsl2LExtLineProfDpboEsEL
This configuration parameter defines the assumed electrical length of
cables (E-side cables) connecting exchange based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to
spec…
0.5dBUnsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.57
hwadsl2LExtLineProfDpboEselMin
DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using
the SOL model (expansion of a KVz and ADSL2 provision of additional KVz areas from this KVz
using cross-cables to additional KVz)…
0.5dBUnsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.58
hwadsl2LExtLineProfDpboEsCableModelA
This configuration parameter defines a cable model in terms of three scalars
DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency
dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…
Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.2011.6.31.1.13.1.59
hwadsl2LExtLineProfDpboEsCableModelB
This configuration parameter defines a cable model in terms of three scalars
DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency
dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…
Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.2011.6.31.1.13.1.60
hwadsl2LExtLineProfDpboEsCableModelC
This configuration parameter defines a cable model in terms of three scalars
DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency
dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…
Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.2011.6.31.1.13.1.61
hwadsl2LExtLineProfDpboMus
DPBOMUS defines the assumed minimum usable receive signal PSD (in dBm/Hz) for
exchange based services, used to modify parameter DPBOFMAX defined below. It
shall be coded as an unsigned integer representing a PSD level…
0.5dBm/HzUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.62
hwadsl2LExtLineProfDpboFMin
DPBOFMIN defines the minimum frequency from which the DPBO shall be applied.
It shall be coded as a 16 bits unsigned integer representing a frequency in
multiple of 4.3125 KHz. The range of valid values is from 0 kHz …
4.3125 KHzUnsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.63
hwadsl2LExtLineProfDpboFMax
DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be
coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz.
The range of valid values is from 138 kHz (coded …
4.3125 KHzUnsigned32r/w
Constraints:
range: 32-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.64
hwadsl2LExtLineProfMaxNomPsdUs
Maximum PSD margin in upstream.
dBm/HzInteger32r/w
Constraints:
range: -60--30
 .1.3.6.1.4.1.2011.6.31.1.13.1.65
hwadsl2LExtLineProfMaxNomAtpDs
The maximum nominal aggregate transmit power in the
downstream direction during initialization and showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.66
hwadsl2LExtLineProfMaxNomAtpUs
The maximum nominal aggregate transmit power in the upstream
direction during initialization and showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.13.1.67
hwadsl2LExtLineProfInmIatoDs
The parameter of downstream impulse noise monitoring inter arrival time offset.
This is the inter arrival time offset that the xTU receiver shall use to determine
in which bin of the inter arrival time histogram the IA…
Unsigned32r/w
Constraints:
range: 3-511
 .1.3.6.1.4.1.2011.6.31.1.13.1.68
hwadsl2LExtLineProfInmIatsDs
The parameter of downstream impulse noise monitoring inter arrival time step.
This is the inter arrival time step that the xTU receiver shall use to determine
in which bin of the inter arrival time histogram the IAT is…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.31.1.13.1.69
hwadsl2LExtLineProfInmCcDs
The parameter of downstream impulse noise monitoring cluster continuation value.
This is the cluster continuation value that the xTU receiver shall use
in the cluster indication process described in the relevant ITU-T …
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.31.1.13.1.70
hwadsl2LExtLineProfInmInpeqModeDs
The parameter of downstream impulse noise monitoring equivalent impulse noise protect mode.
This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP,
as defined in th…
Unsigned32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.2011.6.31.1.13.1.71
hwadsl2LExtLineProfForceInpDs
The parameter indicates that the framer settings of the upstream bearer
shall be selected such that the impulse noise protection computed according
to the formula specified in the relevant recommendation is greater th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.6.31.1.13.1.72
hwadsl2LExtLineProfForceInpUs
The parameter indicates that the framer settings of the upstream bearer
shall be selected such that the impulse noise protection computed according
to the formula specified in the relevant recommendation is greater th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.6.31.1.13.1.73
hwadsl2LExtLineProfInitPolicy
If retransmission is not used in a given transmit direction, this parameter indicates
which policy shall be applied to determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY…
Enumerationr/w
Enumerated Values:
1policy0
2policy1
3policy2
 .1.3.6.1.4.1.2011.6.31.1.13.1.74
hwadsl2LExtLineProfL3Time
This minimum time (in seconds) between an entry into the
L3 state and the L0 or L2 state.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.31.1.13.1.75
hwadsl2LExtLineProfL3ModeState
Power management state enabling. The state of L3 power management mode.
Options:
1. enabled(1) - The L3 power management mode is enabled
2. disabled(2) - The L3 power management mode is disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.31.1.13.1.76

hwAdslLineLatestActParaInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.14 · 1 row entry · 18 columns
Open in standard view 
This table provides one row for each ADSL port.
Each row contains the latest actived parameters.
The index of this table is ifIndex.
hwAdslLineLatestActParaInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.14.1
This table provides one row for each ADSL port.
Each row contains the latest actived parameters.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslLineLatestActiveTimeInfo
Actual time when latest actived.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.14.1.1
hwAdslLineLatestDeactiveTimeInfo
Actual time when latest deactived. If port is actived, the value is invalid.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.14.1.2
hwAdslAtucLatestTxRateInfo
Actual transmit rate on this channel when latest actived.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.3
hwAdslAturLatestTxRateInfo
Actual transmit rate on this channel when latest actived.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.4
hwAdslAtucLatestSnrMgnInfo
Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event.
Unit: tenth dB.
tenth dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.14.1.5
hwAdslAturLatestSnrMgnInfo
Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event.
Unit: tenth dB.
tenth dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.31.1.14.1.6
hwAdslAtucLatestAtnInfo
Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event.
Unit: tenth dB.
tenth dBSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.7
hwAdslAturLatestAtnInfo
Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event.
Unit: tenth dB.
tenth dBSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.8
hwAdslAtucLatestAttainableRateInfo
Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.9
hwAdslAturLatestAttainableRateInfo
Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.10
hwAdslAtucLatestConfTxRateInfo
Configured transmit rate for ADSL port. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for ATUC receive rates.
Unit: bps.
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.11
hwAdslAturLatestConfTxRateInfo
Configured receive rate for ADSL port. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for ATUC receive rates.
Unit: bps.
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.12
hwAdslAtucLatestInterleaveDelayInfo
Interleave delay for this channel when latest actived.
Unit: milliseconds
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.13
hwAdslAturLatestInterleaveDelayInfo
Interleave delay for this channel when latest actived.
Unit: milliseconds
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.14
hwAdslAtucLatestTargetSnrMgnInfo
Port Signal/Noise Margin.
Range: 0-310
Unit: tenth dB
tenth dBInteger32
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.14.1.15
hwAdslAturLatestTargetSnrMgnInfo
Port Signal/Noise Margin.
Range: 0-310
Unit: tenth dB
tenth dBInteger32
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.14.1.16
hwAdslAtucLatestTxRateThresholdInfo
Port down stream threshold.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.17
hwAdslAturLatestTxRateThresholdInfo
Port up stream threshold.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.14.1.18

hwXdslPortPerformanceStatInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.15 · 1 row entry · 10 columns
Open in standard view 
XDSL port performance staticstic table.
The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.
hwXdslPortPerformanceStatInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.15.1
XDSL port performance staticstic table.
The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.
Indexes
IF-MIBifIndex hwXdslPort15minutesPerformanceIntervalInfo
Column Syntax OID
hwXdslPort15minutesPerformanceIntervalInfo
The index of the interval which is queried.
Range: 0-96
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.31.1.15.1.1
hwXdslPort15minutesPerformanceInBytesInfo
Read the receive bytes of xDSL port during 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.2
hwXdslPort15minutesPerformanceOutBytesInfo
Read the transmit bytes of xDSL port during 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.3
hwXdslPortSyncSuccNumberInfo
Number of successful activations of the ADSL/G.SHDSL port within 15 minutes
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.4
hwXdslPortSyncFailNumberInfo
Number of failed activations of the ADSL/G.SHDSL port within 15 minutes
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.5
hwXdslPortAtucCodeViolationInfo
Number of head errors of the ATUC cell within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.6
hwXdslPortAturCodeViolationInfo
Number of head errors of the ATUR cell within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.7
hwXdslPortAtucFecSecondsInfo
Seconds of the ATUC FEC errors within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.8
hwXdslPortAturFecSecondsInfo
Seconds of the ATUR FEC errors within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.9
hwXdslPortCurrent15minutesStatTimeInfo
Read the Stat. time of current 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.15.1.10

hwadslAtucPhysInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.16 · 1 row entry · 5 columns
Open in standard view 
This table provides the physical layer parameters of each ATUC.
The index of this table is ifIndex.
hwadslAtucPhysInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.16.1
This table provides the physical layer parameters of each ATUC.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslAtucCurrTransModeInfo
A set of ADSL line transmission modes.
HUAWEI-ADSL-MIBHWADSLTRANSMISSIONMODETYPE .1.3.6.1.4.1.2011.6.31.1.16.1.1
hwAdslAtucCurrSignalAtnInfo
Current signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C.
Range: 0-630
Unit: tenth dB
tenth dBUnsigned32
Constraints:
range: 0-630
 .1.3.6.1.4.1.2011.6.31.1.16.1.2
hwadslAtucInvG994VendorId
The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.31.1.16.1.3
hwadslAtucLInvSelfTestResult
The ATU self-test result, coded as a 32-bit value. The
most significant octet of the result is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discretiona…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.16.1.4
hwadslAtucTransmissionCapabilitiesInfo
The ATU transmission system capability list of the different
coding types. It is coded in a bit-map representation with 1
or more bits set. A bit set to '1' means that the ATU
supports the respective coding. The value m…
ADSL2-LINE-TC-MIBAdsl2TransmissionModeType
Textual Convention: ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Bits
Type Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapped
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapped
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53reserved13
54reserved14
55reserved15
 .1.3.6.1.4.1.2011.6.31.1.16.1.5

hwadslLineExtInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.17 · 1 row entry · 10 columns
Open in standard view 
This table is an extension of RFC 2662. It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system. An entry extends the adslLineEntry defined in
[RFC2662]. Each entry corresponds to an ADSL
line.
The index of this table is ifIndex.
hwadslLineExtInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.17.1
This table is an extension of RFC 2662. It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system. An entry extends the adslLineEntry …
Indexes
No indexes recorded
Column Syntax OID
hwadsl2LineTransAtucActualInfo
The actual transmission mode of the ATU-C.
During ADSL line initialization, the ADSL
Transceiver Unit - Remote terminal end (ATU-R)
will determine the mode used for the link.
This value will be limited a single transmis…
ADSL2-LINE-TC-MIBAdsl2TransmissionModeType
Textual Convention: ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Bits
Type Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapped
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapped
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53reserved13
54reserved14
55reserved15
 .1.3.6.1.4.1.2011.6.31.1.17.1.1
hwadslLineStatusRtxUsedDs
This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime)
in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter
in upstream is RTX_USED_us. In G…
Enumeration
Enumerated Values:
-1invalidValue
1rtxInuse
2rtxUnusedModeForbidden
3rtxUnusedNotSupportedXtuc
4rtxUnusedNotSupportedXtur
5rtxUnusedNotSupportedXtucAndXtur
 .1.3.6.1.4.1.2011.6.31.1.17.1.2
hwadslLineStatusInitResult
Indicates the result of the last full initialization performed
on the line.
Options:
1. noFail(0) - Successful initialization
2. configError(1) - Configuration failure
3. configNotFea…
Enumeration
Enumerated Values:
-1invalidValue
0noFail
1configError
2configNotFeasible
3commFail
4noPeerXtu
5otherCause
6ginpNotSelected
 .1.3.6.1.4.1.2011.6.31.1.17.1.3
hwadslLineStatusSigAttenDs
The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (physical values are 0 to 1…
0.1 dBUnsigned32
Constraints:
range: 0-1270
range: 2147483646-2147483647
 .1.3.6.1.4.1.2011.6.31.1.17.1.4
hwadslLineStatusSigAttenUs
The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (physical values are 0 to 1…
0.1 dBUnsigned32
Constraints:
range: 0-1270
range: 2147483646-2147483647
 .1.3.6.1.4.1.2011.6.31.1.17.1.5
hwadslLineStatusActPsdDs
Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(physical values are -90 to 0 dBm/Hz).
A value of…
0.1 dBInteger32
Constraints:
range: -900-0
range: 2147483647-2147483647
 .1.3.6.1.4.1.2011.6.31.1.17.1.6
hwadslLineStatusActPsdUs
Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (physical values
are -90 to 0 dBm/Hz).
A value of 0x7FFF…
0.1 dBInteger32
Constraints:
range: -900-0
range: 2147483647-2147483647
 .1.3.6.1.4.1.2011.6.31.1.17.1.7
hwadslLineStatusLastRetrainInfo
Indicates the last retrained information performed on the line.
Options:
1. none(1) - No record is available …
Enumeration
Enumerated Values:
1none
2cpe-l3-trigger
3lom-us-trigger-dra
4lom-ds-trigger-dra
5cpe-never-answer-oam
6cpe-no-more-answer-oam
7persistent-ncd-us
8persistent-ncd-ds
9persistent-lcd-us
10persistent-lcd-ds
11l2-problem-co-drop
12l2-problem-cpe-drop
13bitswap-refused-us-co-drop
14bitswap-refused-us-cpe-drop
15channel-change-us-co-drop
16channel-change-us-cpe-drop
17noise-increase-us-co-drop
18noise-increase-us-cpe-drop
19bitswap-refused-ds-co-drop
20bitswap-refused-ds-cpe-drop
21channel-change-ds-co-drop
22channel-change-ds-cpe-drop
23noise-increase-ds-co-drop
24noise-increase-ds-cpe-drop
25lom-us-co-drop
26lom-us-cpe-drop
27lom-ds-co-drop
28lom-ds-cpe-drop
29sra-problem-us-co-drop
30sra-problem-us-cpe-drop
31sra-failed-us-co-drop
32sra-failed-us-cpe-drop
33sra-problem-ds-co-drop
34sra-problem-ds-cpe-drop
35sra-rejected-ds-co-drop
36sra-rejected-ds-cpe-drop
37bitswap-problem-us-co-drop
38bitswap-problem-us-cpe-drop
39bitswap-failed-us-co-drop
40bitswap-failed-us-cpe-drop
41bitswap-problem-ds-co-drop
42bitswap-problem-ds-cpe-drop
43bitswap-rejected-ds-co-drop
44bitswap-rejected-ds-cpe-drop
45cpe-switched-off
46cpe-lost
47co-reset
48co-stop
49unknown
 .1.3.6.1.4.1.2011.6.31.1.17.1.8
hwadslLineStatusLineRateDs
The actual line rate downstream.
Unit: bits/second
bits/secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.17.1.9
hwadslLineStatusLineRateUs
The actual line rate upstream.
Unit: bits/second
bits/secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.17.1.10

hwadslAtucChanPerfDataInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.18 · 1 row entry · 26 columns
Open in standard view 
Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel.
The index of this table is ifIndex.
hwadslAtucChanPerfDataInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.18.1
Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslAtucChanFecBlksInfo
The count of all blocks received with FEC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.1
hwadslAtucChanHecBlksInfo
The count of all blocks received with HEC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.2
hwadslAtucChanCrcBlksInfo
The count of all blocks received with CRC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.3
hwadslAtucChanPerfCurr15MinFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.4
hwadslAtucChanPerfCurr15MinHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.5
hwadslAtucChanPerfCurr15MinCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.6
hwadslAtucChanPerfCurr1DayFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel during the current day as
measured by adslAtucChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.7
hwadslAtucChanPerfCurr1DayHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel during the current day as
measured by adslAtucChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.8
hwadslAtucChanPerfCurr1DayCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel during the current day as
measured by adslAtucChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.9
hwadslAtucChanPerfPrev1DayFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.10
hwadslAtucChanPerfPrev1DayHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.11
hwadslAtucChanPerfPrev1DayCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.12
hwadslAtucChanRtxCWInfo
The count of units request retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.13
hwadslAtucChanRtxCorrectedCWInfo
The count of units corrected by retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.14
hwadslAtucChanRtxUncorrectedCWInfo
The count of units uncorrected by retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.15
hwadslAtucChanPerfCurr15MinRtxCWInfo
The count of units request retransmission on this
channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.16
hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo
The count of units corrected by retransmission on this
channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.17
hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on
this channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.18
hwadslAtucChanPerfCurr1DayRtxCWInfo
The count of units request retransmission on
this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.19
hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo
The count of units corrected by retransmission
on this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.20
hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo
The count of units uncorrected by retransmission
on this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.21
hwadslAtucChanPerfPrev1DayRtxCWInfo
The count of units request retransmission on this channel
within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.22
hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo
The count of units corrected by retransmission on this
channel within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.23
hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on this
channel within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.18.1.24
hwadslAtucChanCurr15MStartTime
Start time of the current 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.18.1.25
hwadslAtucChanCurr1DayStartTime
Start time of the current 1-day performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.18.1.26

hwadslAturChanPerfDataInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.19 · 1 row entry · 26 columns
Open in standard view 
Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel.
The index of this table is ifIndex.
hwadslAturChanPerfDataInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.19.1
Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwadslAturChanFecBlksInfo
The count of all blocks received with FEC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.1
hwadslAturChanHecBlksInfo
The count of all blocks received with HEC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.2
hwadslAturChanCrcBlksInfo
The count of all blocks received with CRC anomalies
since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.3
hwadslAturChanPerfCurr15MinFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.4
hwadslAturChanPerfCurr15MinHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.5
hwadslAturChanPerfCurr15MinCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel within the current 15 minutes
interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.6
hwadslAturChanPerfCurr1DayFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel during the current day as
measured by adslAturChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.7
hwadslAturChanPerfCurr1DayHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel during the current day as
measured by adslAturChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.8
hwadslAturChanPerfCurr1DayCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel during the current day as
measured by adslAturChanPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.9
hwadslAturChanPerfPrev1DayFecBlksInfo
The count of all blocks received with FEC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.10
hwadslAturChanPerfPrev1DayHecBlksInfo
The count of all blocks received with HEC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.11
hwadslAturChanPerfPrev1DayCrcBlksInfo
The count of all blocks received with HEC anomalies
on this channel within the most recent previous
1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.12
hwadslAturChanRtxCWInfo
The count of units request retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.13
hwadslAturChanRtxCorrectedCWInfo
The count of units corrected by retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.14
hwadslAturChanRtxUncorrectedCWInfo
The count of units uncorrected by retransmission since agent reset.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.15
hwadslAturChanPerfCurr15MinRtxCWInfo
The count of units request retransmission on this
channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.16
hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo
The count of units corrected by retransmission on
this channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.17
hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on
this channel within the current 15 minutes interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.18
hwadslAturChanPerfCurr1DayRtxCWInfo
The count of units request retransmission on
this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.19
hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo
The count of units corrected by retransmission
on this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.20
hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo
The count of units uncorrected by retransmission
on this channel during the current day.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.21
hwadslAturChanPerfPrev1DayRtxCWInfo
The count of units request retransmission on this
channel within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.22
hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo
The count of units corrected by retransmission on this
channel within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.23
hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on this
channel within the most recent previous 1-day period.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.19.1.24
hwadslAturChanCurr15MStartTime
Start time of the current 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.19.1.25
hwadslAturChanCurr1DayStartTime
Start time of the current 1-day performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.19.1.26

hwadslAturChanIntervalInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.20 · 1 row entry · 7 columns
Open in standard view 
Period table of collecting the ATUR channel performance data.
This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods).
The indexes of this table are ifIndex and adslAturChanIntervalNumber.
hwadslAturChanIntervalInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.20.1
Period table of collecting the ATUR channel performance data.
This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods).
The indexes of this entr…
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAturChanIntervalNumber
Column Syntax OID
hwadslAturChanIntervalFecBlksInfo
The count of all blocks received with FRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.20.1.1
hwadslAturChanIntervalHecBlksInfo
The count of all blocks received with HRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.20.1.2
hwadslAturChanIntervalCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.20.1.3
hwadslAturChanIntervalRtxCWInfo
The count of units request retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.20.1.4
hwadslAturChanIntervalRtxCorrectedCWInfo
The count of units corrected by retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.20.1.5
hwadslAturChanIntervalRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.20.1.6
hwAdslAturChanIntervalStartTime
Start time of the historical 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.20.1.7

hwadslLineAlarmConfProfileCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.21 · 1 row entry · 3 columns
Open in standard view 
This table contains information on the ADSL line configuration. 
One entry in this table reflects a profile defined by a manager 
which can be used to configure the modem for a physical line.
The entry contains information on the ADSL line configuration.
Each entry consists of a list of parameters that represents the 
configuration of an ADSL modem.
When 'dynamic' profiles are implemented, a default profile will always exist. 
This profile's name will be set to 'DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified in this document.
When 'static' profiles are implemented, profiles are automatically created or 
destroyed as ADSL physical lines are discovered and removed by the system. 
The name of the profile will be equivalent to the decimal value of the line's
interface index.
The index of this table is adslLineAlarmConfProfileName.
hwadslLineAlarmConfProfileCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.21.1
This table contains information on the ADSL line configuration.
One entry in this table reflects a profile defined by a manager
which can be used to configure the modem for a physical line.
The entry contains informat…
Indexes
ADSL-LINE-MIBadslLineAlarmConfProfileName
Column Syntax OID
hwadslLineAlarmConfProfileDyingGaspCfg
This object enables/disables the report of LOSS-OF-POWER
alarm in an ADSL line. This object is defaulted enable(1).
Options:
1. enable(1) - The report of LOSS-OF-POWER alarm in an ADSL line is enabled
2. disable(2) - T…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.21.1.1
hwadslLineAlarmConfProfXturThresh15MinLeftrs
A threshold for the hwAdslAturPerfCurr15MLeftrs counter,
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.2011.6.31.1.21.1.2
hwAdslLineAlarmConfProfileActiveFailAlarmSwitch
This object enable/disable the active fail alarm switch.
Options:
1. enable(1) - The active fail alarm switch is enabled
2. disable(2) - The active fail alarm switch is disabled
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.31.1.21.1.3

hwAdslPortPerformanceStatInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.22 · 1 row entry · 44 columns
Open in standard view 
This table is used to describe the performance statistics of the ADSL port within 15 minutes.
The indexes of this table are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex.
hwAdslPortPerformanceStatInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.22.1
This table is used to describe the performance statistics of the ADSL port within 15 minutes.
The indexes of this entry are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex.
Indexes
IF-MIBifIndex hwAdslPort15minutesPerformanceIntervalIndex
Column Syntax OID
hwAdslPort15minutesPerformanceIntervalIndex
The index of the interval which is queried.
Range: 0-96
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.31.1.22.1.1
hwAdslPort15minutesPerformanceInBytesInfo
Read the received bytes of xDSL port during 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.2
hwAdslPort15minutesPerformanceOutBytesInfo
Read the transmitted bytes of xDSL port during 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.3
hwAdslPortSyncSuccNumberInfo
Number of successful activations within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.4
hwAdslPortSyncFailNumberInfo
Number of failed activations within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.5
hwAdslPortAtucCodeViolationInfo
Seconds of head errors of the ATUC cell within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.6
hwAdslPortAturCodeViolationInfo
Seconds of the head errors of the ATUC cell within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.7
hwAdslPortAtucFecSecondsInfo
Seconds of the ATUC FEC errors within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.8
hwAdslPortAturFecSecondsInfo
Seconds of the ATUR FEC errors within 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.9
hwAdslPortCurrent15minutesTimeElapseInfo
Seconds that is passed within the current 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.10
hwAdslPortAtucHecDropCellsCntInfo
ATUC cells discarded with HEC Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.11
hwAdslPortAturHecDropCellsCntInfo
ATUR cells discarded with HEC Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.12
hwAdslLineConfProfileInfo
The value of this object identifies the row
in the ADSL Line Configuration Profile Table,
(adslLineConfProfileTable), which applies for this
ADSL line, and channels if applicable.
For 'dynamic' mode, in the case whi…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.22.1.13
hwAdslPort15minUpTimeInfo
The up time in the interval.
Unit: seconds
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.14
hwAdslAtucCurrAtnInfo
Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU.
Range: 0-630
Unit: tenth dB
tenth dBUnsigned32
Constraints:
range: 0-630
 .1.3.6.1.4.1.2011.6.31.1.22.1.15
hwAdslAtucCurrSnrMgnInfo
Noise Margin as seen by this ATU with respect to its
received signal.
Unit: tenth dB
tenth dBInteger32
Constraints:
range: -640-640
 .1.3.6.1.4.1.2011.6.31.1.22.1.16
hwAdslAtucCurrAttainableRateInfo
Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.17
hwAdslAtucChanCurrTxRateInfo
The actual transmitted rate on this channel.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.18
hwAdslAturCurrAtnInfo
Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU.
Range: 0-630
Unit: tenth dB
tenth dBUnsigned32
Constraints:
range: 0-630
 .1.3.6.1.4.1.2011.6.31.1.22.1.19
hwAdslAturCurrSnrMgnInfo
Noise Margin as seen by this ATU with respect to its
received signal.
Range: (-640)-(640)
Unit: tenth dB
tenth dBInteger32
Constraints:
range: -640-640
 .1.3.6.1.4.1.2011.6.31.1.22.1.20
hwAdslAturCurrAttainableRateInfo
Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.21
hwAdslAturChanCurrTxRateInfo
The actual transmitted rate on this channel.
Unit: bps
bpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.22.1.22
hwAdslAtucIntervalESsInfo
Seconds of the ATU-C errors at the interval.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.23
hwAdslAtucIntervalLofsInfo
The count of seconds in the interval when there was Loss
of Framing.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.24
hwAdslAtucIntervalLolsInfo
The count of seconds in the interval when there was Loss
of Link.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.25
hwAdslAtucIntervalLossInfo
The count of seconds in the interval when there was Loss
of Signal.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.26
hwAdslAtucIntervalLprsInfo
The count of seconds in the interval when there was Loss
of Power.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.27
hwAdslAturIntervalESsInfo
Seconds of the ATU-R errors at the interval.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.28
hwAdslAturIntervalLofsInfo
The count of seconds in the interval when there was
Loss of Framing.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.29
hwAdslAturIntervalLossInfo
The count of seconds in the interval when there was
Loss of Signal.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.30
hwAdslAturIntervalLprsInfo
The count of seconds in the interval when there was
Loss of Power.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.31
hwAdslAtucChanIntervalReceivedBlksInfo
The count of all encoded blocks received on this channel
during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.32
hwAdslAtucChanIntervalTransmittedBlksInfo
The count of all encoded blocks transmitted on this
channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.33
hwAdslAtucChanIntervalCorrectedBlksInfo
The count of all blocks received with errors that were
corrected on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.34
hwAdslAtucChanIntervalUncorrectBlksInfo
The count of all blocks received with uncorrectable
errors on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.35
hwAdslAturChanIntervalReceivedBlksInfo
The count of all encoded blocks received on this channel
during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.36
hwAdslAturChanIntervalTransmittedBlksInfo
The count of all encoded blocks transmitted on this
channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.37
hwAdslAturChanIntervalCorrectedBlksInfo
The count of all blocks received with errors that were
corrected on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.38
hwAdslAturChanIntervalUncorrectBlksInfo
The count of all blocks received with uncorrectable
errors on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.39
hwAdslAtucIntervalSesLInfo
For the each interval, adslAtucIntervalSesL
reports the number of seconds during which
there have been severely errored seconds-line.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.40
hwAdslAtucIntervalUasLInfo
For the each interval, adslAtucIntervalUasL
reports the number of seconds during which
there have been unavailable seconds-line.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.41
hwAdslAturIntervalSesLInfo
For the each interval, adslAturIntervalSesL
reports the number of seconds during which
there have been severely errored seconds-line.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.42
hwAdslAturIntervalUasLInfo
For the each interval, adslAturIntervalUasL
reports the number of seconds during which
there have been unavailable seconds-line.
Unit: seconds
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.22.1.43
hwAdslPortCurrentActModeInfo
Instantaneous value of the technology type
that line is currently trained up under.
Options:
1. adsl(1) - Indicates that line is currently trained up under adsl type
2. adsl2(2) - Indicates that line is current…
Enumeration
Enumerated Values:
1adsl
2adsl2
3adsl2plus
 .1.3.6.1.4.1.2011.6.31.1.22.1.44

hwadslPortRateChangeTrapParaInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.23 · 1 row entry · 7 columns
Open in standard view 
ADSL line rate change trap parameter table.
The index of this table is ifIndex.
hwadslPortRateChangeTrapParaInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.23.1
ADSL line rate change trap parameter table.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslPortRateChangeTrapIPIAIDInfo
The port IPIAID is reported when the port rate changes.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.31.1.23.1.1
hwAdslPortRateChangeTrapMUXIDInfo
The port MUXID is reported when the port rate changes.
Range: 0-20
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.31.1.23.1.2
hwAdslPortRateChangeTrapTimeStampInfo
The time stamp of Line rate change trap.
Standard Unix format; as the number of seconds since 1/1/1970.
Unit:Seconds.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.23.1.3
hwAdslPortRateChangeTrapDSLineRateInfo
Down stream line rate after line rate change.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.23.1.4
hwAdslPortRateChangeTrapUSLineRateInfo
Up stream line rate after line rate change.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.23.1.5
hwAdslPortRateChangeTrapEventTypeInfo
Event type reported during the previous change of the rate
If both the upstream and downstream rates change, this leaf outputs character string 'DU'.
If only the upstream rates changes, this leaf outputs character strin…
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.6.31.1.23.1.6
hwAdslPortRateChangeTrapDslTypeInfo
DSL line type of the port whose rate changes.
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.2011.6.31.1.23.1.7

hwadslAtucPerfDataInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.25 · 1 row entry · 34 columns
Open in standard view 
Table of querying the performance statistics of the ATUC port.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this table is ifIndex.
hwadslAtucPerfDataInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.25.1
Table of querying the performance statistics of the ATUC port.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslAtucPerfFailFullInitsInfo
The count of the line initialization failed attempts since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.1
hwAdslAtucPerfCurr15MinFailFullInitsInfo
The count of the line initialization failed attempts in the current 15 minutes interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.2
hwAdslAtucPerfCurr1DayFailFullInitsInfo
The count of the line initialization failed attempts in the day
as measured by adslAtucPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.3
hwAdslAtucPerfPrev1DayFailFullInitsInfo
The count of the line initialization failed attempts in the most recent previous 1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.4
hwAdslAtucPerfFullInitsInfo
Count of the line initialization full attempts since agent reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.5
hwAdslAtucPerfCurr15MinFullInitsInfo
Count of the line initialization full attempts in the current 15 minute interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.6
hwAdslAtucPerfCurr1DayFullInitsInfo
Count of the line initialization full attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.7
hwAdslAtucPerfPrev1DayFullInitsInfo
Count of the line initialization full attempts in the most recent previous 1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.8
hwAdslAtucPerfCurr15MLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a near-end leftr defect present observed over the current 15 minutes
accumulation period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.9
hwAdslAtucPerfCurr15MEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the current 15 minutes
accumulation period.
The near-end counter is only defined in upst…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.10
hwAdslAtucPerfCurr15MMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes
accumulation period.
The near-end value i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.11
hwAdslAtucPerfCurr1DayLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a near-end leftr defect present observed over the current 24 hours
accumulation period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.12
hwAdslAtucPerfCurr1DayEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits current observed over the current 24 hours
accumulation period.
The near-end counter is only defined …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.13
hwAdslAtucPerfCurr1DayMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours
accumulation period.
The near-end value is …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.14
hwAdslAtucPerfPrev1DayLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a near-end leftr defect present over the previous 24 hours
accumulation period during this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.15
hwAdslAtucPerfPrev1DayEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the previous 24 hours
accumulation period during this interval.
The near-end counter is …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.16
hwAdslAtucPerfPrev1DayMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours
accumulation period during this interval.
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.17
hwAdslAtucPerfCurrEverBeforeLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a near-end leftr defect present observed ever before.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.18
hwAdslAtucPerfCurrEverBeforeEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed ever before.
The near-end counter is only defined in upstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.19
hwAdslAtucPerfCurrEverBeforeMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed ever before.
The near-end value is only defined in upstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.20
hwAdslAtucPerfCurr15MStartTime
Start time of the current 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.25.1.21
hwAdslAtucPerfCurr1DayStartTime
Start time of the current 1-day performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.25.1.22
hwAdslAtucPerfCurr15MInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 15 minutes.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.25.1.23
hwAdslAtucPerfCurr15MInmame
This parameter is a count of the INMAME anomalies
occurring on the line during current 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.24
hwAdslAtucPerfCurr15MInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during current 15 minutes.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.25.1.25
hwAdslAtucPerfCurr1DayInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 1 day.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.25.1.26
hwAdslAtucPerfCurr1DayInmame
This parameter is a count of the INMAME anomalies
occurring on the line during current 1 day.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.27
hwAdslAtucPerfCurr1DayInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during current 1 day.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.25.1.28
hwAdslAtucPerfPre1DayInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during the most recent previous 1-day period.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.25.1.29
hwAdslAtucPerfPre1DayInmame
This parameter is a count of the INMAME anomalies
occurring on the line during the most recent previous 1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.30
hwAdslAtucPerfPre1DayInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during the most recent previous 1-day period.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.25.1.31
hwAdslAtucPerfCurrEverBeforeInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line ever before.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.25.1.32
hwAdslAtucPerfCurrEverBeforeInmame
This parameter is a count of the INMAME anomalies
occurring on the line ever before.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.25.1.33
hwAdslAtucPerfCurrEverBeforeInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line ever before.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.25.1.34

hwadslAtucIntervalInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.26 · 1 row entry · 9 columns
Open in standard view 
This table provides one row for each ATUC
performance data collection interval.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this table is ifIndex.
hwadslAtucIntervalInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.26.1
This table provides one row for each ATUC
performance data collection interval.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAtucIntervalNumber
Column Syntax OID
hwAdslAtucIntervalFailFullInitsInfo
The count of the line initialization failed attempts during the interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.1
hwAdslAtucIntervalFullInitsInfo
Count of the line initialization full attempts during the interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.2
hwAdslAtucIntervalLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a near-end leftr defect present observed over the previous 15 minutes
accumulation period during the interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.3
hwAdslAtucIntervalEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the previous 15 minutes
accumulation period during the interval.
The near-end counter is…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.4
hwAdslAtucIntervalMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the previous 15 minutes
accumulation period during the interval…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.5
hwAdslAtucIntervalStartTime
Start time of the historical 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.26.1.6
hwAdslAtucIntervalInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line at 15 minutes interval.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.26.1.7
hwAdslAtucIntervalInmame
This parameter is a count of the INMAME anomalies
occurring on the line at 15 minutes interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.26.1.8
hwAdslAtucIntervalInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line at 15 minutes interval.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.26.1.9

hwadslAtucChanIntervalInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.28 · 1 row entry · 7 columns
Open in standard view 
Period table of collecting the ATUC channel performance data
This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods).
The indexes of this table are ifIndex and adslAtucChanIntervalNumber.
hwadslAtucChanIntervalInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.28.1
Period table of collecting the ATUC channel performance data
This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods).
The indexes of this entry…
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAtucChanIntervalNumber
Column Syntax OID
hwadslAtucChanIntervalFecBlksInfo
The count of all blocks received with FRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.28.1.1
hwadslAtucChanIntervalHecBlksInfo
The count of all blocks received with HRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.28.1.2
hwadslAtucChanIntervalCrcBlksInfo
The count of all blocks received with CRC anomalies
on this channel during this interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.2011.6.31.1.28.1.3
hwadslAtucChanIntervalRtxCWInfo
The count of units request retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.28.1.4
hwadslAtucChanIntervalRtxCorrectedCWInfo
The count of units corrected by retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.28.1.5
hwadslAtucChanIntervalRtxUncorrectedCWInfo
The count of units uncorrected by retransmission on this channel during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.28.1.6
hwAdslAtucChanIntervalStartTime
Start time of the historical 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.28.1.7

hwAdsl2SCStatusInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.29 · 1 row entry · 8 columns
Open in standard view 
The table hwAdsl2SCStatusInfoTable contains status parameters
of the ADSL2 sub-carriers.
The indexes of this table are ifIndex and hwAdsl2SCStatusDirectionInfo.
hwAdsl2SCStatusInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.29.1
The table hwAdsl2SCStatusInfoTable contains status parameters
of the ADSL2 sub-carriers.
The indexes of this entry are ifIndex and hwAdsl2SCStatusDirectionInfo.
Indexes
IF-MIBifIndex hwAdsl2SCStatusDirectionInfo
Column Syntax OID
hwAdsl2SCStatusDirectionInfo
The direction of the sub-carrier is either
upstream or downstream.
Options:
1. upstream(1) - The direction of the sub-carrier is upstream
2. downstream(2) - The direction of the sub-carrier is downstream
Enumeration
Enumerated Values:
1upstream
2downstream
 .1.3.6.1.4.1.2011.6.31.1.29.1.1
hwAdsl2SCStatusSnrInfo
The SNR Margin per sub-carrier, expressing the ratio between
the received signal power and received noise power per
subscriber. It is an array of 512 octets, designed for
supporting up to 512 (downstream) sub-carriers.…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.6.31.1.29.1.2
hwAdsl2SCStatusBitsAllocInfo
The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on ups…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.31.1.29.1.3
hwAdsl2SCStatusGainAllocInfo
The gain allocation per sub-carrier. An array of 512 16-bits
values, designed for supporting up to 512 (downstream) sub-
carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream …
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.31.1.29.1.4
hwAdsl2SCStatusLogInfo
An array of up to 512 real H(f) logarithmic representation
values in dB for the respective transmission direction. It is
designed to support up to 512 (downstream) sub-carriers.
The number of utilized values on downstre…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.31.1.29.1.5
hwAdsl2SCStatusQlnInfo
An array of up to 512 real Quiet Line Noise values in dBm/Hz
for the respective transmission direction. It is designed for
up to 512 (downstream) sub-carriers.
The number of utilized values on downstream direction depen…
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.6.31.1.29.1.6
hwAdsl2SCStatusSnrMarginInfo
SNR Margin is the maximum increase in dB of the noise power
received at the ATU (ATU-R on downstream direction and ATU-C
on upstream direction), such that the BER requirements are met
for all bearer channels received at…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.31.1.29.1.7
hwAdsl2SCStatusTxPSDInfo
The PSD MASK per sub-carrier. An array of 512 16-bits
values, designed for supporting up to 512 (downstream) sub-carriers.
It ranges from -1400 to -300 units of 0.1 dBm/Hz (physical values
are -140 to -30 dBm/Hz)
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.6.31.1.29.1.8

hwxdslDynamicProfCfgTable

table
.1.3.6.1.4.1.2011.6.31.1.30 · 1 row entry · 51 columns
Open in standard view 
This table includes common parameters of the xDSL Dynamic profile.
The index of this table is hwxdslDynamicProfProfileNameCfg.
hwxdslDynamicProfCfgEntry entry .1.3.6.1.4.1.2011.6.31.1.30.1
This table includes common parameters of the xDSL Dynamic profile.
The index of this entry is hwxdslDynamicProfProfileNameCfg.
Indexes
hwxdslDynamicProfProfileNameCfg
Column Syntax OID
hwxdslDynamicProfProfileNameCfg
The name of xDSL Dynamic Profile.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.31.1.30.1.1
hwxdslDynamicProfXtuTransSysEnaCfg
XTU Transmission System Enabling (ATSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the XTUs may apply the …
Bitsr/w
Enumerated Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapped
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapped
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53reserved13
54reserved14
55reserved15
56reserved16
57reserved17
58reserved18
59reserved19
60reserved20
61reserved21
62reserved22
63reserved23
64reserved24
65reserved25
66reserved26
67reserved27
68reserved28
69reserved29
70reserved30
71reserved31
72g9932AnnexAPots
73g9932AnnexAIsdn
74g9932AnnexBPots
75g9932AnnexBIsdn
76g9932AnnexCPots
77g9932AnnexCIsdn
78reserved32
79reserved33
 .1.3.6.1.4.1.2011.6.31.1.30.1.2
hwxdslDynamicProfBitSwapDSCfg
Enables or disables the bit swap downstream of a line.
Options:
1. disable(1) - The bit swap downstream of a line is disabled
2. enable(2) - The bit swap downstream of a line is enabled
3. invalidValue(-1) …
Enumerationr/w
Enumerated Values:
-1invalidValue
1disable
2enable
 .1.3.6.1.4.1.2011.6.31.1.30.1.3
hwxdslDynamicProfBitSwapUSCfg
Enables or disables the bit swap upstream of a line.
Options:
1. disable(1) - The bit swap upstream of a line is disabled
2. enable(2) - The bit swap upstream of a line is enabled
3. invalidValue(-1) - Inva…
Enumerationr/w
Enumerated Values:
-1invalidValue
1disable
2enable
 .1.3.6.1.4.1.2011.6.31.1.30.1.4
hwxdslDynamicProfTargetSnrmDsCfg
The target Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.5
hwxdslDynamicProfTargetSnrmUsCfg
The target Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.6
hwxdslDynamicProfMaxSnrmDsCfg
The maximum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 31…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.7
hwxdslDynamicProfMaxSnrmUsCfg
The maximum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 31…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.8
hwxdslDynamicProfMinSnrmDsCfg
The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 31…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.9
hwxdslDynamicProfMinSnrmUsCfg
The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 31…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.2011.6.31.1.30.1.10
hwxdslDynamicProfCh1MinProtectionDsCfg
Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not requi…
Enumerationr/w
Enumerated Values:
-1invalidValue
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteenSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.30.1.11
hwxdslDynamicProfCh1MinProtectionUsCfg
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not require…
Enumerationr/w
Enumerated Values:
-1invalidValue
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteenSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.30.1.12
hwxdslDynamicProfCh1MaxDelayDsCfg
Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual o…
millisecondsUnsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.6.31.1.30.1.13
hwxdslDynamicProfCh1MaxDelayUsCfg
Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual one-w…
millisecondsUnsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.6.31.1.30.1.14
hwxdslDynamicProfCh2MinProtectionDsCfg
Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not requi…
Enumerationr/w
Enumerated Values:
-1invalidValue
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteenSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.30.1.15
hwxdslDynamicProfCh2MinProtectionUsCfg
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not require…
Enumerationr/w
Enumerated Values:
-1invalidValue
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteenSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.2011.6.31.1.30.1.16
hwxdslDynamicProfCh2MaxDelayDsCfg
Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual o…
millisecondsUnsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.6.31.1.30.1.17
hwxdslDynamicProfCh2MaxDelayUsCfg
Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The XTUs shall choose the S (factor) and
D (depth) values such that the actual one-w…
millisecondsUnsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.6.31.1.30.1.18
hwxdslDynamicProfPmModeCfg
Power management state Enabling. Defines the power states the
xTU-C or xTU-R may autonomously transition to on this line.
The various bit positions are: allowTransitionsToIdle (0) and
allowTransitionsToLowPower (1). A b…
Bitsr/w
Enumerated Values:
0allowTransitionsToIdle
1allowTransitionsToLowPower
 .1.3.6.1.4.1.2011.6.31.1.30.1.19
hwxdslDynamicProfL0TimeCfg
This minimum time (in seconds) between an exit from the L2
state and the next Entry into the L2 state. It ranges from 0
to 255 seconds.
Range: 0-255
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.30.1.20
hwxdslDynamicProfL2TimeCfg
This minimum time (in seconds) between an entry into the
L2 state and the first power trim in the L2 state and between
two consecutive power trims in the L2 State.
It ranges from 0 to 255 seconds.
Range: 0-255
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.30.1.21
hwxdslDynamicProfL2AtprCfg
The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single power trim in the L2 state.
It ranges from 0 dB to 31 dB.
Range: 0-31
Unit: dB
dBUnsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.31.1.30.1.22
hwxdslDynamicProfL2AtprtCfg
The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and power trims.
Range: 0-31
Uni…
dBUnsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.31.1.30.1.23
hwxdslDynamicProfDpboEPsdCfg
This parameter defines the PSD mask that is assumed to be permitted at the exchange.
This parameter shall use the same format as PSDMASKds. The maximum number of breakpoints
for DPBOEPSD is 16.
This is a string of 16 …
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2011.6.31.1.30.1.24
hwxdslDynamicProfDpboEsELCfg
This configuration parameter defines the assumed electrical length of
cables (E-side cables) connecting exchange based DSL services to a remote
flexibility point (cabinet), that hosts the xTU-C that is subject to
spec…
0.5dBUnsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2011.6.31.1.30.1.25
hwxdslDynamicProfDpboEscmCfg
This configuration parameter defines a cable model in terms of three scalars
DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency
dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.2011.6.31.1.30.1.26
hwxdslDynamicProfDpboMusCfg
DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for
exchange based services, used to modify parameter DPBOFMAX defined below. It
shall be coded as an unsigned integer representing a PSD level…
0.5dBm/HzUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.30.1.27
hwxdslDynamicProfDpboFMinCfg
DPBOFMIN defines the minimum frequency from which the DPBO shall be applied.
It shall be coded as a 16 bits unsigned integer representing a frequency in
multiple of 4.3125 KHz. The range of valid values is from 0 kHz …
4.3125 KHzUnsigned32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.2011.6.31.1.30.1.28
hwxdslDynamicProfDpboFMaxCfg
DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be
coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz.
The range of valid values is from 138 kHz (coded …
4.3125 KHzUnsigned32r/w
Constraints:
range: 32-6956
 .1.3.6.1.4.1.2011.6.31.1.30.1.29
hwxdslDynamicProfUpboPsdBandCfg
This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band except US0. A UPBOPSD defined for each band ahsll consist of two
parameters [a, b]. Parameter a shall be …
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.31.1.30.1.30
hwxdslDynamicProfUpboKLFCfg
This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB
(UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the
electrical loop length shall…
Enumerationr/w
Enumerated Values:
-1invalidValue
1forced
2auto
 .1.3.6.1.4.1.2011.6.31.1.30.1.31
hwxdslDynamicProfUpboKLCfg
This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by
the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0)
to 128 dB (coded as 1280) in s…
0.1 dBUnsigned32r/w
Constraints:
range: 0-1280
 .1.3.6.1.4.1.2011.6.31.1.30.1.32
hwxdslDynamicProfRfiBandsCfg
The subset of PSD mask breakpoints that shall be
used to notch an RFI band.
It is a string of bands consist of begin tone index
and end tone index.
for example :0-10,20-50,100-4095
It can contain as most as 16 bands.
OctetStringr/w
Constraints:
range: 0-159
 .1.3.6.1.4.1.2011.6.31.1.30.1.33
hwxdslDynamicProfToneBlackOutCfg
The subset of subcarriermask that shall be
used to mask the subcarriers.
It is a string of bands consist of begin tone index
and end tone index.
For example :0-10,20-50,100-4095.
It can contain as most as 8 bands.
OctetStringr/w
Constraints:
range: 0-79
 .1.3.6.1.4.1.2011.6.31.1.30.1.34
hwxdslDynamicProfCarMaskDSCfg
Sub-carriers mask. A bitmap of 512 bits that allows masking
up to 512 downstream sub-carriers, depending on NSCds. If bit
i (0 <= i < NSCds) is set to '1', the respective
downstream sub-carrier i is masked, and if…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.31.1.30.1.35
hwxdslDynamicProfCarMaskUSCfg
Sub-carriers mask. A bitmap of 64 bits that allows masking
up to 64 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the respective
upstream sub-carrier i is masked, and if set…
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.6.31.1.30.1.36
hwxdslDynamicProfXdslModeCfg
The xDSL mode is a way of categorizing the various XDSL
transmission modes into groups, each group (XDSL Mode) shares
the same PSD configuration.
Options:
1. defMode (1) - XDSL transmit mode is …
Enumerationr/w
Enumerated Values:
-1invalidValue
1defMode
2adsl
3adsl2Pots
4adsl2Isdn
5adsl2PlusPots
6adsl2PlusIsdn
7adsl2ReachExtended
8g9923PotsNonOverlapped
9g9923PotsOverlapped
10g9923IsdnNonOverlapped
11g9923isdnOverlapped
14g9924potsNonOverlapped
15g9924potsOverlapped
18g9923AnnexIAllDigNonOverlapped
19g9923AnnexIAllDigOverlapped
20g9923AnnexJAllDigNonOverlapped
21g9923AnnexJAllDigOverlapped
22g9924AnnexIAllDigNonOverlapped
23g9924AnnexIAllDigOverlapped
24g9923AnnexLMode1NonOverlapped
25g9923AnnexLMode2NonOverlapped
26g9923AnnexLMode3Overlapped
27g9923AnnexLMode4Overlapped
28g9923AnnexMPotsNonOverlapped
29g9923AnnexMPotsOverlapped
30g9925PotsNonOverlapped
31g9925PotsOverlapped
32g9925IsdnNonOverlapped
33g9925isdnOverlapped
36g9925AnnexIAllDigNonOverlapped
37g9925AnnexIAllDigOverlapped
38g9925AnnexJAllDigNonOverlapped
39g9925AnnexJAllDigOverlapped
40g9925AnnexMPotsNonOverlapped
41g9925AnnexMPotsOverlapped
42vdsl2Pots
43vdsl2Isdn
 .1.3.6.1.4.1.2011.6.31.1.30.1.37
hwxdslDynamicProfMaxNomPsdDsCfg
The maximum nominal transmit PSD in the downstream
direction during initialization and show time. It ranges from
-600 to -300 units of 0.1 dBm/Hz(physical values are -60 to
-30 dBm/Hz). The invalid value is -1. If data …
0.1 dBInteger32r/w
Constraints:
range: -600--300
range: -1--1
 .1.3.6.1.4.1.2011.6.31.1.30.1.38
hwxdslDynamicProfMaxNomPsdUsCfg
The maximum nominal transmit PSD in the upstream
direction during initialization and show time. It ranges from
-600 to -300 units of 0.1 dBm/Hz(physical values are -60 to
-30 dBm/Hz). The invalid value is -1. If data is…
0.1 dBInteger32r/w
Constraints:
range: -600--300
range: -1--1
 .1.3.6.1.4.1.2011.6.31.1.30.1.39
hwxdslDynamicProfMaxNomAtpDsCfg
The maximum nominal aggregate transmit power in the
downstream direction during initialization and show time. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm).
Range: 0-255
Unit: 0.1 dBm
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.30.1.40
hwxdslDynamicProfMaxNomAtpUsCfg
The maximum nominal aggregate transmit power in the
upstream direction during initialization and show time. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm).
Range: 0-255
Unit: 0.1 dBm
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.31.1.30.1.41
hwxdslDynamicProfPsdMaskDsCfg
This configuration parameter defines the downstream PSD mask
applicable at the U C2 reference point.
This MIB PSD mask may impose PSD restrictions in addition
to the Limit PSD mask defined in the relevant Recommendati…
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.31.1.30.1.42
hwxdslDynamicProfPsdMaskUsCfg
This configuration parameter defines the upstream PSD
mask applicable at the U R2 reference point. This MIB
PSD mask may impose PSD restrictions in addition to the
Limit PSD mask defined in the relevant Recommendatio…
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2011.6.31.1.30.1.43
hwxdslDynamicProfLimitMaskCfg
This configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line.
Options:
1. profile8a (1) - The G.993.2 profile is profile8a
2. profile8b (2) - The G.993.2 profile is …
Enumerationr/w
Enumerated Values:
-1invalidValue
1profile8a
2profile8b
3profile8c
4profile8d
5profile12a
6profile12b
7profile17a
8profile30a
 .1.3.6.1.4.1.2011.6.31.1.30.1.44
hwxdslDynamicProfClassMaskCfg
In order to reduce the number of configuration possibilities,
the limit PSD masks are grouped in the following PSD mask classes:
Options:
1. annexA998-D-32(1) - Class 998 Annex A: D-32, D-64, D-48, D-128…
Enumerationr/w
Enumerated Values:
-1invalidValue
1annexA998-D-32
2annexA998-D-64
3annexB997-M1c-A-7
4annexB997-M1x-M-8
5annexB997-M1x-M
6annexB997-M2x-M-8
7annexB997-M2x-A
8annexB997-M2x-M
9annexB998-M1x-A
10annexB998-M1x-B
11annexB998-M1x-NUS0
12annexB998-M2x-A
13annexB998-M2x-M
14annexB998-M2x-B
15annexB998-M2x-NUS0
16annexBHPE17-M1
17annexBHPE30-M1
18annexB997E17-M2x-A
19annexB997E30-M2x-NUS0
20annexB998E17-M2x-NUS0
21annexB998E17-M2x-NUS0-M
22annexB998ADE17-M2x-NUS0-M
23annexB998ADE17-M2x-B
24annexB998E30-M2x-NUS0
25annexB998E30-M2x-NUS0-M
26annexB998ADE30-M2x-NUS0-M
27annexB998ADE17-M2x-A
28annexB998ADE30-M2x-NUS0-A
29annexA998-D-48
30annexA998-D-128
31annexB998ADE17-M2x-M
 .1.3.6.1.4.1.2011.6.31.1.30.1.45
hwxdslDynamicProfBandOptUsageCfg
Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).
Options:
1. disable(1) - Indicates Opt is unused
2. enable(2) - Indicates Opt usage is for upstream
3. invalidValue…
Enumerationr/w
Enumerated Values:
-1invalidValue
1disable
2enable
 .1.3.6.1.4.1.2011.6.31.1.30.1.46
hwxdslDynamicProfVirtualNoiseModeDsCfg
Defines the Virtual Noise of downsteam.
Options:
1. disable(1) -unused
2. enable(2) -used
3. invalidValue(-1) -invalid Value
Huawei defined.
Enumerationr/w
Enumerated Values:
-1invalidValue
1disable
2enable
 .1.3.6.1.4.1.2011.6.31.1.30.1.47
hwxdslDynamicProfVirtualNoiseModeUsCfg
Defines the Virtual Noise of upstream.
Options:
1. disable(1) -unused
2. enable(2) -used
3. invalidValue(-1) -invalid Value
Huawei defined.
Enumerationr/w
Enumerated Values:
-1invalidValue
1disable
2enable
 .1.3.6.1.4.1.2011.6.31.1.30.1.48
hwxdslDynamicProfVirtualNoiseDsCfg
The Virtual Noise of downsteam.
This is a string of 32 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduc…
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.31.1.30.1.49
hwxdslDynamicProfVirtualNoiseUsCfg
The Virtual Noise of upsteam.
This is a string of 16 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reducti…
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2011.6.31.1.30.1.50
hwxdslDynamicProfRowStatusCfg
This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.31.1.30.1.51

hwXdslPortIopCaptureInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.31 · 1 row entry · 2 columns
Open in standard view 
The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture.
The index of this table is ifIndex.
hwXdslPortIopCaptureInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.31.1
The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture.
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwXdslPortIopCaptureOperTypeCfg
Start or stop IOP information capture of xDSL port.
Options:
1. start(1) - Start IOP information capture of xDSL port
2. stop(2) - Stop IOP information capture of xDSL port
3. invalid(-1) - Invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1start
2stop
 .1.3.6.1.4.1.2011.6.31.1.31.1.1
hwXdslPortIopCaptureOperStatusInfo
Port IOP capture status
Options:
1. noCapture(1) - Indicates that the capture is not performed
2. capturing(2) - Indicates that the capture is being performed
3. iop-generate(3) - Indicates that the IOP file is g…
Enumeration
Enumerated Values:
-1invalid
1noCapture
2capturing
3iop-generate
4captured
 .1.3.6.1.4.1.2011.6.31.1.31.1.2

hwXdslDynamicInfoCollectInfoTable

table deprecated
.1.3.6.1.4.1.2011.6.31.1.32 · 1 row entry · 4 columns
Open in standard view 
The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect.
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwXdslDynamicInfoCollectInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.32.1
The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex
Column Syntax OID
hwXdslDynamicInfoCollectInfo deprecated
Start Dynamic information collecting of xDSL port.
Options:
1. start(1) - Indicates the collecting starts
2. invalid(-1) - Invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1start
 .1.3.6.1.4.1.2011.6.31.1.32.1.1
hwXdslDynamicInfoCollectStatusInfo deprecated
Board Dynamic information collecting status.
Options:
1. noCollect(1) - Indicates that collecting data is not performed
2. collecting(2) - Indicates that collecting data is being performed
3. collected(3) - Indicates …
Enumeration
Enumerated Values:
1noCollect
2collecting
3collected
 .1.3.6.1.4.1.2011.6.31.1.32.1.2
hwXdslDynamicInfoCollectTimeInfo deprecated
Time at which collecting the optimization information is complete.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.32.1.3
hwXdslDynamicInfoCollectPortList deprecated
This object defines the operating port list of certain xDSL board.
Each bit of this string specifies a port. If that bit has a value of '1', then that port is
included in the set of ports; the port is not included if i…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.31.1.32.1.4

hwadslAturPerfDataInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.33 · 1 row entry · 26 columns
Open in standard view 
This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this table is ifIndex.
hwadslAturPerfDataInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.33.1
This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The index of this entry is ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
hwAdslAturPerfCurr15MStartTime
Start time of the current 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.33.1.1
hwAdslAturPerfCurr1DayStartTime
Start time of the current 1-day performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.33.1.2
hwAdslAturPerfCurr15MInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 15 minutes.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.33.1.3
hwAdslAturPerfCurr15MInmame
This parameter is a count of the INMAME anomalies
occurring on the line during current 15 minutes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.4
hwAdslAturPerfCurr15MInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during current 15 minutes.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.33.1.5
hwAdslAturPerfCurr1DayInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during current 1 day.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.33.1.6
hwAdslAturPerfCurr1DayInmame
This parameter is a count of the INMAME anomalies
occurring on the line during current 1 day.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.7
hwAdslAturPerfCurr1DayInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during current 1 day.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.33.1.8
hwAdslAturPerfPre1DayInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line during the most recent previous 1-day period.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.33.1.9
hwAdslAturPerfPre1DayInmame
This parameter is a count of the INMAME anomalies
occurring on the line during the most recent previous 1-day period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.10
hwAdslAturPerfPre1DayInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line during the most recent previous 1-day period.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.33.1.11
hwAdslAturPerfCurrEverBeforeInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line ever before.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.33.1.12
hwAdslAturPerfCurrEverBeforeInmame
This parameter is a count of the INMAME anomalies
occurring on the line ever before.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.13
hwAdslAturPerfCurrEverBeforeInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line ever before.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.33.1.14
hwAdslAturPerfCurr15MLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a far-end leftr defect present observed over the current 15 minutes
accumulation period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.15
hwAdslAturPerfCurr15MEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the current 15 minutes
accumulation period.
The far-end counter is only defined in downs…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.16
hwAdslAturPerfCurr15MMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes
accumulation period.
The far-end value is…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.17
hwAdslAturPerfCurr1DayLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a far-end leftr defect present observed over the current 24 hours
accumulation period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.18
hwAdslAturPerfCurr1DayEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits current observed over the current 24 hours
accumulation period.
The far-end counter is only defined i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.19
hwAdslAturPerfCurr1DayMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours
accumulation period.
The far-end value is o…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.20
hwAdslAturPerfPrev1DayLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a far-end leftr defect present over the previous 24 hours
accumulation period during this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.21
hwAdslAturPerfPrev1DayEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the previous 24 hours
accumulation period during this interval.
The far-end counter i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.22
hwAdslAturPerfPrev1DayMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours
accumulation period during this interval.
…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.23
hwAdslAturPerfCurrEverBeforeLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a far-end leftr defect present observed ever before.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.24
hwAdslAturPerfCurrEverBeforeEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed ever before.
The far-end counter is only defined in downstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.25
hwAdslAturPerfCurrEverBeforeMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed ever before.
The far-end value is only defined in downstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.33.1.26

hwadslAturIntervalInfoTable

table
.1.3.6.1.4.1.2011.6.31.1.34 · 1 row entry · 7 columns
Open in standard view 
This table provides one row for each Atur
performance data collection interval.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The indexes of this table are ifIndex and adslAturIntervalNumber.
hwadslAturIntervalInfoEntry entry .1.3.6.1.4.1.2011.6.31.1.34.1
This table provides one row for each Atur
performance data collection interval.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).
The indexes of this entry are ifIndex and adslAturIntervalN…
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAturIntervalNumber
Column Syntax OID
hwAdslAturIntervalStartTime
Start time of the historical 15-minute performance statistics.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.31.1.34.1.1
hwAdslAturIntervalInmainpeq
This parameter is a count of the INMAINPEQi anomalies
occurring on the line at 15 minutes interval.
Each INMAINPEQ needs 4 bytes.
OctetString
Constraints:
range: 0-68
 .1.3.6.1.4.1.2011.6.31.1.34.1.2
hwAdslAturIntervalInmame
This parameter is a count of the INMAME anomalies
occurring on the line at 15 minutes interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.34.1.3
hwAdslAturIntervalInmaiat
This parameter is a count of the INMAIATi anomalies
occurring on the line at 15 minutes interval.
Each INMAIAT needs 4 bytes.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.31.1.34.1.4
hwAdslAturIntervalLeftrs
If retransmission is used in a given transmit direction, this parameter is a count of
the seconds with a far-end leftr defect present observed over the previous 15 minutes
accumulation period during the interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.34.1.5
hwAdslAturIntervalEfb
If retransmission is used in a given transmit direction, this parameter
is a count of the number of error-free bits observed over the previous 15 minutes
accumulation period during the interval.
The far-end counter is …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.34.1.6
hwAdslAturIntervalMinEftr
If retransmission is used in a given transmit direction, this parameter MINEFTR reports
the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes
accumulation period during the interval.
The far…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.31.1.34.1.7