hwadslLineStatusRtxUsedDs
HUAWEI-ADSL-EXT-MIB ·
.1.3.6.1.4.1.2011.6.31.1.17.1.2
Object
column
Enumeration
This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us. In G.992.3 and G992.5 only the downstream parameter RTX_USED_ds is relevant, the value in the upstream direction shall be ignored. In G.993.2, both parameters are relevant. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value This parameter shall also be reported in the case of RTX_MODE=RTX_FORCED with INIT FAILURE or with RTX_MODE=RTX_TESTMODE with INIT FAILURE.
Context
- MIB
- HUAWEI-ADSL-EXT-MIB
- OID
.1.3.6.1.4.1.2011.6.31.1.17.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwadslLineExtInfoEntry
- Table
- hwadslLineExtInfoTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalidValue |
1 | rtxInuse |
2 | rtxUnusedModeForbidden |
3 | rtxUnusedNotSupportedXtuc |
4 | rtxUnusedNotSupportedXtur |
5 | rtxUnusedNotSupportedXtucAndXtur |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwadsl2LineTransAtucActualInfo The actual transmission mode of the ATU-C.
During ADSL line initialization, the ADSL
Transceiver Unit - Remote terminal end (ATU-R)
will determine the mode used for the link.
This… | column | ADSL2-LINE-TC-MIBAdsl2TransmissionModeType | .1.3.6.1.4.1.2011.6.31.1.17.1.1 |
| hwadslLineStatusLineRateUs The actual line rate upstream.
Unit: bits/second | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.31.1.17.1.10 |
| hwadslLineStatusInitResult Indicates the result of the last full initialization performed
on the line.
Options:
1. noFail(0) - Successful initialization
2. configError(1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.17.1.3 |
| hwadslLineStatusSigAttenDs The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 uni… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.31.1.17.1.4 |
| hwadslLineStatusSigAttenUs The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 uni… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2011.6.31.1.17.1.5 |
| hwadslLineStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(physical… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.31.1.17.1.6 |
| hwadslLineStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (physical values… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2011.6.31.1.17.1.7 |
| hwadslLineStatusLastRetrainInfo Indicates the last retrained information performed on the line.
Options:
1. none(1) - No record is available … | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.17.1.8 |
| hwadslLineStatusLineRateDs The actual line rate downstream.
Unit: bits/second | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.31.1.17.1.9 |