hwadslAtucChanActNetDataRate
HUAWEI-ADSL-EXT-MIB ·
.1.3.6.1.4.1.2011.6.31.1.3.1.11
Object
Independent whether retransmission is used or not in a given transmit direction: In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. The data rate is coded in steps of 1000 bit/s.
Context
- MIB
- HUAWEI-ADSL-EXT-MIB
- OID
.1.3.6.1.4.1.2011.6.31.1.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Units
- bits/second
- Parent
- hwadslAtucChanInfoEntry
- Table
- hwadslAtucChanInfoTable
- Siblings
- 12
Syntax
bits/second SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwadslAtucChanCurrINPInfo Indicates Impulse Noise Protection on downstream direction.
The value multiply 1/10000 is the real value.
If retransmission is used in a given transmit direction, this parameter r… | column | DMT Symbol SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.1 |
| hwadslAtucChanPcbInfo Indicates Power Cut-back on downstream direction.
It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB)
Unit: tenth dB | column | tenth dB SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.10 |
| hwadslAtucChanActINPAgainstREIN If retransmission is used in a given transmit direction,
this parameter reports the actual impulse noise protection (INP) against
REIN (under specific conditions detailed in G.9… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.12 |
| hwadslAtucChanL2NetDataRate In L2 state, this parameter reports the Net Data Rate in low power state.
The data rate is coded in steps of 1000 bit/s. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.13 |
| hwadslAtucChanRsSymbolsInfo Indicates Reed-Solomon symbols on downstream direction.
The value multiply 1/10000 is the real value.
Unit: byte | column | byte SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.2 |
| hwadslAtucChanRsRedundancyInfo Indicates Reed-Solomon redundancy on downstream direction.
Unit: byte | column | byte SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.3 |
| hwadslAtucChanRsDepthInfo Indicates Reed-Solomon depth on downstream direction.
Unit: byte | column | byte SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.4 |
| hwadslAtucChanSymbolLengthInfo Indicates the Bit Number of the DMT Symbol on downstream direction.
Unit: bit | column | bit SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.5 |
| hwadslAtucChanPhyRrrcBitsInfo The bits in the channel that used to retransmission on downstream direction. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.6 |
| hwadslAtucChanPhyRtxQueueInfo Queues in send buffer on downstream direction. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.7 |
| hwadslAtucChanRsSizeInfo Indicates Reed-Solomon Codeword Size on downstream direction.
Range: 0-255
Unit: byte | column | byte SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.8 |
| hwadslAtucChanCodeGainInfo Indicates Code Gain on downstream direction.
It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB). | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.3.1.9 |