hwXdslPortFarEndRunStateCfg

HUAWEI-ADSL-EXT-MIB · .1.3.6.1.4.1.2011.6.31.1.8.1.10
MIB view Table view

Object

column Enumeration 
Remote running status of the xDSL port. This object is defaulted unknown(1).
Options:
1. unknown(1)   - Unknown status
2. noModem(2)   - Port is not connected to modem
3. handshake(3) - Handshake status
4. showtime(4)  - Port is activated

Context

MIB
HUAWEI-ADSL-EXT-MIB
OID
.1.3.6.1.4.1.2011.6.31.1.8.1.10
Type
column
Access
readonly
Status
current
Parent
hwXdslPortCfgEntry
Table
hwXdslPortCfgTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2noModem
3handshake
4showtime

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwXdslPortMaxMacLearnCfg
Set Max MAC count on the xDSL port. Range: 0-255 Default: 255
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.1
hwXdslPortPowerStateCfg
Xdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5…
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.8.1.11
hwXdslPortUpCntCfg
The up counts of xDSL port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.31.1.8.1.12
hwXdslPortUpCntAdminStatusCfg
Admin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.8.1.13
hwXdslPortLastUpTimeCfg
Last up time of a xDSL port.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.31.1.8.1.14
hwXdslPortLastDownTimeCfg
Last down time of a xDSL port.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.31.1.8.1.15
hwXdslPortClearUpCntTimeCfg
The time when up counts of a xDSL port is cleared.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.31.1.8.1.16
hwXdslPortRetrainCntCfg
The retrain counts of xDSL Line.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.31.1.8.1.17
hwXdslPortLastRetrainReasonCfg
The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.31.1.8.1.18
hwXdslPortLoopFlagCfg
Loop flag. Options: 1. false(0) - No loop 2. true (1) - Loop
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.8.1.19
hwXdslPortRateMonitorThresholdCfg
Set Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.2
hwXdslPortUpThresholdCfg
Set Port monitoring upstream rate threshold percent value. Range: 0-100 Default: 0
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.20
hwXdslPortDownThresholdCfg
Set Port monitoring downstream rate threshold percent value. Range: 0-100 Default: 0
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.21
hwXdslPortUpThresholdTxRateCfg
Set Port monitoring upstream rate threshold value. Default: 0 Unit:bps
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.6.31.1.8.1.3
hwXdslPortDownThresholdTxRateCfg
Set Port monitoring downstream rate threshold value. Default: 0 Unit:bps
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.6.31.1.8.1.4
hwXdslPortRateMonitorAlarmEnableCfg
Enables or disables port rate monitor alarm. Options: 1. enabled(1) - Enables port rate monitor alarm 2. disabled(2) - Disables port rate monitor alarm
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.8.1.5
hwXdslPortUpTimeCfg
Duration of the xDSL port activation Unit: second
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.6.31.1.8.1.6
hwXdslPortNTEPowerStatusCfg
NTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power status is on 2. off(2) - NTE power status is off 3. unknown(3) - NTE power is in unknown …
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.8.1.7
hwXdslPortCurrentUpRateCfg
Xdsl port current upstream value. Range: 0-30000 Default: 0
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.8
hwXdslPortCurrentDownRateCfg
Xdsl port current downstream value. Range: 0-30000 Default: 0
columnInteger32.1.3.6.1.4.1.2011.6.31.1.8.1.9