hwXdslPortLastRetrainReasonCfg
HUAWEI-ADSL-EXT-MIB ·
.1.3.6.1.4.1.2011.6.31.1.8.1.18
Object
column
SNMPv2-SMIUnsigned32
The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason.
Context
- MIB
- HUAWEI-ADSL-EXT-MIB
- OID
.1.3.6.1.4.1.2011.6.31.1.8.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwXdslPortCfgEntry
- Table
- hwXdslPortCfgTable
- Siblings
- 20
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXdslPortMaxMacLearnCfg Set Max MAC count on the xDSL port.
Range: 0-255
Default: 255 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.1 |
| hwXdslPortFarEndRunStateCfg Remote running status of the xDSL port. This object is defaulted unknown(1).
Options:
1. unknown(1) - Unknown status
2. noModem(2) - Port is not connected to modem
3. handshak… | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.10 |
| hwXdslPortPowerStateCfg Xdsl port power state.
Options:
1. l0(1) - Full-on state
2. l2(2) - Low power state
3. l3(3) - Idle state
4. l1(4) - Low power state
5… | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.11 |
| hwXdslPortUpCntCfg The up counts of xDSL port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.31.1.8.1.12 |
| hwXdslPortUpCntAdminStatusCfg Admin the up counts of xDSL port.
Options:
1. reset(0) - Reset the up counts of xDSL port | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.13 |
| hwXdslPortLastUpTimeCfg Last up time of a xDSL port. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.31.1.8.1.14 |
| hwXdslPortLastDownTimeCfg Last down time of a xDSL port. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.31.1.8.1.15 |
| hwXdslPortClearUpCntTimeCfg The time when up counts of a xDSL port is cleared. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.31.1.8.1.16 |
| hwXdslPortRetrainCntCfg The retrain counts of xDSL Line. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.31.1.8.1.17 |
| hwXdslPortLoopFlagCfg Loop flag.
Options:
1. false(0) - No loop
2. true (1) - Loop | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.19 |
| hwXdslPortRateMonitorThresholdCfg Set Port monitoring rate threshold percent. Including upstream and downstream.
Range: 0-100
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.2 |
| hwXdslPortUpThresholdCfg Set Port monitoring upstream rate threshold percent value.
Range: 0-100
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.20 |
| hwXdslPortDownThresholdCfg Set Port monitoring downstream rate threshold percent value.
Range: 0-100
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.21 |
| hwXdslPortUpThresholdTxRateCfg Set Port monitoring upstream rate threshold value.
Default: 0
Unit:bps | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.8.1.3 |
| hwXdslPortDownThresholdTxRateCfg Set Port monitoring downstream rate threshold value.
Default: 0
Unit:bps | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.6.31.1.8.1.4 |
| hwXdslPortRateMonitorAlarmEnableCfg Enables or disables port rate monitor alarm.
Options:
1. enabled(1) - Enables port rate monitor alarm
2. disabled(2) - Disables port rate monitor alarm | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.5 |
| hwXdslPortUpTimeCfg Duration of the xDSL port activation
Unit: second | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.6.31.1.8.1.6 |
| hwXdslPortNTEPowerStatusCfg NTE power status, this object is defaulted off(2).
Options:
1. on(1) - NTE power status is on
2. off(2) - NTE power status is off
3. unknown(3) - NTE power is in unknown … | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.8.1.7 |
| hwXdslPortCurrentUpRateCfg Xdsl port current upstream value.
Range: 0-30000
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.8 |
| hwXdslPortCurrentDownRateCfg Xdsl port current downstream value.
Range: 0-30000
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.31.1.8.1.9 |