hwadslLineStatusLastRetrainInfo

HUAWEI-ADSL-EXT-MIB · .1.3.6.1.4.1.2011.6.31.1.17.1.8
MIB view Table view

Object

column Enumeration 
Indicates the last retrained information performed on the line.                   
Options:
1. none(1)                           - No record is available                                                                                                       
2. cpe-l3-trigger(2)                 - The terminal initiates a low power consumption L3 request                                                                           
3. lom-us-trigger-dra(3)             - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment                                      
4. lom-ds-trigger-dra(4)             - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment                                    
5. cpe-never-answer-oam(5)           - No OAM response is received from the CPE all the time                                                                              
6. cpe-no-more-answer-oam(6)         - No OAM response is received from the CPE                                                                                           
7. persistent-ncd-us(7)              - Upstream continuous no cell delineation                                                                                                            
8. persistent-ncd-ds(8)              - Downstream continuous no cell delineation                                                                                                          
9. persistent-lcd-us(9)              - Upstream continuous loss of cell delineation                                                                                                            
10.persistent-lcd-ds(10)             - Downstream continuous loss of cell delineation                                                                                                          
11.l2-problem-co-drop(11)            - The CO is faulty during the switching from L0 to L2                                                                                
12.l2-problem-cpe-drop(12)           - The CPE is faulty during the switching from L0 to L2                                                                               
13.bitswap-refused-us-co-drop(13)    - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively                                                 
14.bitswap-refused-us-cpe-drop(14)   - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively                                              
15.channel-change-us-co-drop(15)     - The CO goes offline when the upstream net rate changes                                                                             
16.channel-change-us-cpe-drop(16)    - The CPE goes offline when the upstream net rate changes                                                                            
17.noise-increase-us-co-drop(17)     - The CO goes offline when the upstream noise increases                                                                              
18.noise-increase-us-cpe-drop(18)    - The CPE goes offline when the upstream noise increases                                                                             
19.bitswap-refused-ds-co-drop(19)    - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively                                               
20.bitswap-refused-ds-cpe-drop(20)   - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively                                              
21.channel-change-ds-co-drop(21)     - The CO goes offline when the downstream net rate changes                                                                           
22.channel-change-ds-cpe-drop(22)    - The CPE goes offline when the downstream net rate changes                                                                          
23.noise-increase-ds-co-drop(23)     - The CO goes offline when the downstream noise increases                                                                            
24.noise-increase-ds-cpe-drop(24)    - The CPE goes offline when the downstream noise increases                                                                           
25.lom-us-co-drop(25)                - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin                                        
26.lom-us-cpe-drop(26)               - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin                                       
27.lom-ds-co-drop(27)                - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin                                      
28.lom-ds-cpe-drop(28)               - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin                                     
29.sra-problem-us-co-drop(29)        - The CO goes offline when the upstream SRA is faulty                                                                                
30.sra-problem-us-cpe-drop(30)       - The CPE goes offline when the upstream SRA is faulty                                                                               
31.sra-failed-us-co-drop(31)         - The CO goes offline when the upstream SRA fails                                                                                    
32.sra-failed-us-cpe-drop(32)        - The CPE goes offline when the upstream SRA fails                                                                                   
33.sra-problem-ds-co-drop(33)        - The CO goes offline when the downstream SRA is fault                                                                               
34.sra-problem-ds-cpe-drop(34)       - The CPE goes offline when the downstream SRA is faulty                                                                             
35.sra-rejected-ds-co-drop(35)       - The CO goes offline when the downstream SRA is rejected                                                                            
36.sra-rejected-ds-cpe-drop(36)      - The CPE goes offline when the downstream SRA is rejected                                                                           
37.bitswap-problem-us-co-drop(37)    - The CO goes offline when the upstream bit swap is faulty                                                                           
38.bitswap-problem-us-cpe-drop(38)   - The CPE goes offline when the upstream bit swap is faulty                                                                          
39.bitswap-failed-us-co-drop(39)     - The CO goes offline when the upstream bit swap fails                                                                               
40.bitswap-failed-us-cpe-drop(40)    - The CPE goes offline when the upstream bit swap fails                                                                              
41.bitswap-problem-ds-co-drop(41)    - The CO goes offline when the downstream bit swap is faulty                                                                         
42.bitswap-problem-ds-cpe-drop(42)   - The CPE goes offline when the downstream bit swap is faulty                                                                        
43.bitswap-rejected-ds-co-drop(43)   - The CO goes offline when the downstream bit swap is rejected                                                                       
44.bitswap-rejected-ds-cpe-drop(44)  - The CPE goes offline when the downstream bit swap is rejected                                                                      
45.cpe-switched-off(45)              - The CPE power supply is shut down                                                                                                  
46.cpe-lost(46)                      - The CPE is disconnected                                                                                                            
47.co-reset(47)                      - The CO resets the chipset or line                                                                                                  
48.co-stop(48)                       - The CO actively deactivate the port                                                                                               
49.unknown(49)                       - Unknown reason

Context

MIB
HUAWEI-ADSL-EXT-MIB
OID
.1.3.6.1.4.1.2011.6.31.1.17.1.8
Type
column
Access
readonly
Status
current
Parent
hwadslLineExtInfoEntry
Table
hwadslLineExtInfoTable
Siblings
9

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2cpe-l3-trigger
3lom-us-trigger-dra
4lom-ds-trigger-dra
5cpe-never-answer-oam
6cpe-no-more-answer-oam
7persistent-ncd-us
8persistent-ncd-ds
9persistent-lcd-us
10persistent-lcd-ds
11l2-problem-co-drop
12l2-problem-cpe-drop
13bitswap-refused-us-co-drop
14bitswap-refused-us-cpe-drop
15channel-change-us-co-drop
16channel-change-us-cpe-drop
17noise-increase-us-co-drop
18noise-increase-us-cpe-drop
19bitswap-refused-ds-co-drop
20bitswap-refused-ds-cpe-drop
21channel-change-ds-co-drop
22channel-change-ds-cpe-drop
23noise-increase-ds-co-drop
24noise-increase-ds-cpe-drop
25lom-us-co-drop
26lom-us-cpe-drop
27lom-ds-co-drop
28lom-ds-cpe-drop
29sra-problem-us-co-drop
30sra-problem-us-cpe-drop
31sra-failed-us-co-drop
32sra-failed-us-cpe-drop
33sra-problem-ds-co-drop
34sra-problem-ds-cpe-drop
35sra-rejected-ds-co-drop
36sra-rejected-ds-cpe-drop
37bitswap-problem-us-co-drop
38bitswap-problem-us-cpe-drop
39bitswap-failed-us-co-drop
40bitswap-failed-us-cpe-drop
41bitswap-problem-ds-co-drop
42bitswap-problem-ds-cpe-drop
43bitswap-rejected-ds-co-drop
44bitswap-rejected-ds-cpe-drop
45cpe-switched-off
46cpe-lost
47co-reset
48co-stop
49unknown

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwadsl2LineTransAtucActualInfo
The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This…
columnADSL2-LINE-TC-MIBAdsl2TransmissionModeType.1.3.6.1.4.1.2011.6.31.1.17.1.1
hwadslLineStatusLineRateUs
The actual line rate upstream. Unit: bits/second
columnbits/second SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.31.1.17.1.10
hwadslLineStatusRtxUsedDs
This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the par…
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.17.1.2
hwadslLineStatusInitResult
Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) …
columnEnumeration.1.3.6.1.4.1.2011.6.31.1.17.1.3
hwadslLineStatusSigAttenDs
The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 uni…
column0.1 dB Unsigned32.1.3.6.1.4.1.2011.6.31.1.17.1.4
hwadslLineStatusSigAttenUs
The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 uni…
column0.1 dB Unsigned32.1.3.6.1.4.1.2011.6.31.1.17.1.5
hwadslLineStatusActPsdDs
Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical…
column0.1 dB Integer32.1.3.6.1.4.1.2011.6.31.1.17.1.6
hwadslLineStatusActPsdUs
Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values…
column0.1 dB Integer32.1.3.6.1.4.1.2011.6.31.1.17.1.7
hwadslLineStatusLineRateDs
The actual line rate downstream. Unit: bits/second
columnbits/second SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.6.31.1.17.1.9