HM2-PLATFORM-SWITCHING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
53
Rows
53
Columns
292

hm2AgentLagSummaryConfigTable

table
.1.3.6.1.4.1.248.12.1.2.2.2 · 1 row entry · 15 columns
Open in standard view 
A summary table of the switch's LAG config entries
hm2AgentLagSummaryConfigEntry entry .1.3.6.1.4.1.248.12.1.2.2.2.1
Switch's LAG config entry
Indexes
hm2AgentLagSummaryLagIndex
Column Syntax OID
hm2AgentLagSummaryLagIndex
Agent LAG IfIndex.

This value corresponds with the LAG interface in the ifTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.1
hm2AgentLagSummaryName
Agent LAG Name.

The associated name of the LAG used during creation.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.248.12.1.2.2.2.1.2
hm2AgentLagSummaryFlushTimer obsolete
Agent LAG FlushTimer.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.3
hm2AgentLagSummaryLinkTrap
Agent LAG LinkTrap.

Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.2.2.1.4
hm2AgentLagSummaryAdminMode
Agent LAG AdminMode.

Administratively enables or disables this LAG interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.2.2.1.5
hm2AgentLagSummaryStpMode
Agent LAG StpMode

Administratively enables or disables STP on this interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.2.2.1.6
hm2AgentLagSummaryAddPort
Agent LAG AddPort.

Set to a non 0 value to add a port to the LAG. Values correspond to
ifIndex values in the ifTable.

Note: agentPortType for the port to be added must be full duplex
and t…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.7
hm2AgentLagSummaryDeletePort
Agent LAG DeletePort.

Set to a non 0 value to remove a port from the LAG. Values correspond to
ifIndex values in the ifTable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.8
hm2AgentLagSummaryStatus
Agent LAG Status.

active(1) - This LAG is enabled.
destroy(6) - Set to this value to remove the LAG.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.2.2.1.9
hm2AgentLagSummaryType
Agent LAG Type.

static(1) - This LAG is staticly maintained.
dynamic(2) - This LAG is dynamicly maintained.
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.248.12.1.2.2.2.1.10
hm2AgentLagSummaryStaticCapability
Agent LAG Static Capability

enable(1) - Static capability is enabled for this LAG interface
disable(2) - Static capability is disabled for this LAG interface
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.2.2.1.11
hm2AgentLagSummaryHashOption
LAG Hashing Option.

Valid values correspond to

1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination MAC, VLAN, EtherType, and incoming port
…
Enumerationr/w
Enumerated Values:
1sourceMacVlan
2destMacVlan
3sourceDestMacVlan
4sourceIPsourcePort
5destIPdestPort
6sourceDestIPPort
7enhanced
 .1.3.6.1.4.1.248.12.1.2.2.2.1.12
hm2AgentLagSummaryMinimumActiveLinks
Agent LAG Threshold.
This configures the threshold(i.e minimum number of active ports)
value for trunk port .
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.248.12.1.2.2.2.1.13
hm2AgentLagSummaryMaxFrameSizeLimit
This object identifies the largest value that can be
configured for hm2AgentLagSummaryMaxFrameSize.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.248
hm2AgentLagSummaryMaxFrameSize
This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set
to is the value of hm2AgentLagSummaryMaxFrameSizeLimit. For Ethernet ports
which sup…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.2.2.1.249

hm2AgentLagDetailedConfigTable

table
.1.3.6.1.4.1.248.12.1.2.2.3 · 1 row entry · 4 columns
Open in standard view 
A detailed table of the switch's LAG config entries
hm2AgentLagDetailedConfigEntry entry .1.3.6.1.4.1.248.12.1.2.2.3.1
Switch's LAG config entry
Indexes
hm2AgentLagDetailedLagIndex hm2AgentLagDetailedIfIndex
Column Syntax OID
hm2AgentLagDetailedLagIndex
LAG index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.2.3.1.1
hm2AgentLagDetailedIfIndex
LAG port index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.2.3.1.2
hm2AgentLagDetailedPortSpeed
LAG port speed. See agentPortType for a description and list
of valid values.
ObjectIdentifier .1.3.6.1.4.1.248.12.1.2.2.3.1.3
hm2AgentLagDetailedPortStatus
LAG port status.

active(1) - Actively participating in the LAG.
inactive(2) - Not participating in the LAG.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.248.12.1.2.2.3.1.4

hm2AgentSwitchAddressAgingTimeoutTable

table
.1.3.6.1.4.1.248.12.1.2.8.4 · 1 row entry · 1 columns
Open in standard view 
The switch's address aging timeout table
hm2AgentSwitchAddressAgingTimeoutEntry entry .1.3.6.1.4.1.248.12.1.2.8.4.1
Aging information about a specific Filtering Database.
Indexes
Q-BRIDGE-MIBdot1qFdbId
Column Syntax OID
hm2AgentSwitchAddressAgingTimeout
The FDB entry's address aging timeout (in seconds)
Integer32r/w
Constraints:
range: 10-500000
 .1.3.6.1.4.1.248.12.1.2.8.4.1.1

hm2AgentSwitchStaticMacFilteringTable

table
.1.3.6.1.4.1.248.12.1.2.8.5 · 1 row entry · 5 columns
Open in standard view 
The switch's static Mac filtering table
hm2AgentSwitchStaticMacFilteringEntry entry .1.3.6.1.4.1.248.12.1.2.8.5.1
Per port ingress/egress filter configuration based on VLAN Id and MAC address.
Indexes
hm2AgentSwitchStaticMacFilteringVlanId hm2AgentSwitchStaticMacFilteringAddress
Column Syntax OID
hm2AgentSwitchStaticMacFilteringVlanId
The Static MAC Filter Vlan Id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.8.5.1.1
hm2AgentSwitchStaticMacFilteringAddress
The Static MAC Filter MAC address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.5.1.2
hm2AgentSwitchStaticMacFilteringSourcePortMask
The Static MAC Filter source port mask.

When setting this value, the system will ignore configuration for ports not
between the first and last valid ports. Configuration of any port numbers
between this …
Hm2AgentPortMaskr/w
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.5.1.3
hm2AgentSwitchStaticMacFilteringDestPortMask
The Static MAC Filter destination port mask.

When setting this value, the system will ignore configuration for ports not
between the first and last valid ports. Configuration of any port numbers
between …
Hm2AgentPortMaskr/w
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.5.1.4
hm2AgentSwitchStaticMacFilteringStatus
The Static MAC Filter status.

Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.5.1.5

hm2AgentSwitchSnoopingCfgTable

table
.1.3.6.1.4.1.248.12.1.2.8.6.1 · 1 row entry · 4 columns
Open in standard view 
A table of the IGMP/MLD Snooping Global configuration entries.
hm2AgentSwitchSnoopingCfgEntry entry .1.3.6.1.4.1.248.12.1.2.8.6.1.1
Represents entry for Snooping switch Configuration.
Indexes
hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchSnoopingProtocol
The protocol type of network protocol in use.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.12.1.2.8.6.1.1.1
hm2AgentSwitchSnoopingAdminMode
This enables or disables Snooping on the system.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.6.1.1.2
hm2AgentSwitchSnoopingPortMask
IGMP/MLD Snooping Port Mask.

This allows configuration of IGMP/MLD Snooping on selected ports.
IGMP/MLD Snooping cannot be enabled on an interface that has routing
enabled, or is a member of a LAG. If a …
Hm2AgentPortMaskr/w
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.6.1.1.3
hm2AgentSwitchSnoopingMulticastControlFramesProcessed
Multicast Control Frames Processed by CPU.
The number of multicast control frames that have been processed by the CPU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.6.1.1.4

hm2AgentSwitchSnoopingIntfTable

table
.1.3.6.1.4.1.248.12.1.2.8.7.1 · 1 row entry · 8 columns
Open in standard view 
A table of the IGMP/MLD Snooping Interface configuration entries.
hm2AgentSwitchSnoopingIntfEntry entry .1.3.6.1.4.1.248.12.1.2.8.7.1.1
Represents entry for a IGMP/MLD Snooping Interface.
Indexes
IF-MIBifIndex hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchSnoopingIntfIndex
The port number to be selected. Each port maps to an interface.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.1
hm2AgentSwitchSnoopingIntfAdminMode
This enables or disables IGMP/MLD Snooping on a selected interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.2
hm2AgentSwitchSnoopingIntfGroupMembershipInterval
The amount of time in seconds that a switch will wait for a report
from a particular group on the selected interface before deleting the
interface from the entry. This value must be greater than
hm2AgentSwitchSnoopingIn…
Integer32r/w
Constraints:
range: 2-3600
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.3
hm2AgentSwitchSnoopingIntfMaxResponseTime
The amount of time in seconds a switch will wait after sending
a query on the selected interface because it did not receive a report for
a particular group in that interface. This value must be less
than hm2AgentSwitch…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.4
hm2AgentSwitchSnoopingIntfMRPExpirationTime
The amount of time in seconds that a switch will wait for a query to be
received on the selected interface before the interface is removed from
the list of interfaces with multicast routers attached.
A value of 0 repres…
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.5
hm2AgentSwitchSnoopingIntfFastLeaveAdminMode
This enables or disables IGMP/MLD Snooping on the selected interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.6
hm2AgentSwitchSnoopingIntfMulticastRouterMode
The port explicitly configured by management to be IGMP query port for all VLANs.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.7
hm2AgentSwitchSnoopingIntfVlanIDs
This field lists all the VlanIDs which include the selected interface.
VlanList
Textual Convention: VlanList OctetString
 .1.3.6.1.4.1.248.12.1.2.8.7.1.1.8

hm2AgentSwitchSnoopingVlanTable

table
.1.3.6.1.4.1.248.12.1.2.8.8.1 · 1 row entry · 6 columns
Open in standard view 
A table of the IGMP/MLD Snooping Vlan configuration entries.
hm2AgentSwitchSnoopingVlanEntry entry .1.3.6.1.4.1.248.12.1.2.8.8.1.1
Represents entry for a IGMP/MLD Snooping Vlan.
Indexes
Q-BRIDGE-MIBdot1qVlanIndex hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchSnoopingVlanAdminMode
This enables or disables IGMP/MLD Snooping on a selected Vlan interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.1
hm2AgentSwitchSnoopingVlanGroupMembershipInterval
The amount of time in seconds that a switch will wait for a report
from a particular group on the selected vlan before deleting the
interface participating in the vlan from the entry. This value must
be greater than hm2…
Integer32r/w
Constraints:
range: 2-3600
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.2
hm2AgentSwitchSnoopingVlanMaxResponseTime
The amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for
a particular group in the interface participating in the vlan.
This value must be less …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.3
hm2AgentSwitchSnoopingVlanFastLeaveAdminMode
This enables or disables IGMP/MLD Snooping on the selected vlan.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.4
hm2AgentSwitchSnoopingVlanMRPExpirationTime
The amount of time in seconds that a switch will wait for a query to be
received on the selected interface participating in the vlan before the
interface is removed from the list of interfaces with multicast routers
att…
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.5
hm2AgentSwitchSnoopingVlanReportSuppMode
This enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.8.1.1.6

hm2AgentSwitchVlanStaticMrouterTable

table
.1.3.6.1.4.1.248.12.1.2.8.9.1 · 1 row entry · 1 columns
Open in standard view 
A table of the IGMP/MLD Static Mrouter Configuration parameters.
hm2AgentSwitchVlanStaticMrouterEntry entry .1.3.6.1.4.1.248.12.1.2.8.9.1.1
Represents entry for a IGMP/MLD Static Mrouter.
Indexes
IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchVlanStaticMrouterAdminMode
This enables or disables IGMP/MLD mrouter on a per interface per VLAN basis.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.9.1.1.1

hm2AgentSwitchMFDBTable

table
.1.3.6.1.4.1.248.12.1.2.8.10.1 · 1 row entry · 7 columns
Open in standard view 
The Multicast Forwarding Database table
hm2AgentSwitchMFDBEntry entry .1.3.6.1.4.1.248.12.1.2.8.10.1.1
Contains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User.
Indexes
hm2AgentSwitchMFDBVlanId hm2AgentSwitchMFDBMacAddress hm2AgentSwitchMFDBProtocolType
Column Syntax OID
hm2AgentSwitchMFDBVlanId
Vlan Index for which this entry is associated with.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.1
hm2AgentSwitchMFDBMacAddress
A multicast MAC address for which the switch has forwarding and or
filtering information.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.2
hm2AgentSwitchMFDBProtocolType
The component that is responsible for this entry in the Multicast
Forwarding Database.
Enumeration
Enumerated Values:
1static
2gmrp
3igmp
4mld
248mrp-mmrp
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.3
hm2AgentSwitchMFDBType
This displays the type of the entry.

static(1) - Entries configured by the end user
dynamic(2) - Entries added as a result of a learning process or protocol
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.4
hm2AgentSwitchMFDBDescription
Text description of this multicast table entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.5
hm2AgentSwitchMFDBForwardingPortMask
BitMask indicating which ports this entry indicates should be forwarded.

To obtain port numbers from interface numbers, use the objects
hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentPor…
Hm2AgentPortMask
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.6
hm2AgentSwitchMFDBFilteringPortMask
BitMask indicating which ports this entry indicates should be filtered.

To obtain port numbers from interface numbers, use the objects
hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentPort…
Hm2AgentPortMask
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.10.1.1.7

hm2AgentSwitchMFDBSummaryTable

table
.1.3.6.1.4.1.248.12.1.2.8.10.2 · 1 row entry · 3 columns
Open in standard view 
The multicast forwarding database summary table.
hm2AgentSwitchMFDBSummaryEntry entry .1.3.6.1.4.1.248.12.1.2.8.10.2.1
Summarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address.
Indexes
hm2AgentSwitchMFDBSummaryVlanId hm2AgentSwitchMFDBSummaryMacAddress
Column Syntax OID
hm2AgentSwitchMFDBSummaryVlanId
Vlan Index for which this entry is associated with.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.10.2.1.1
hm2AgentSwitchMFDBSummaryMacAddress
A multicast MAC address for which the switch has forwarding and or
filtering information.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.10.2.1.2
hm2AgentSwitchMFDBSummaryForwardingPortMask
Port Mask indicating which ports this entry indicates should be forwarded.

To obtain port numbers from interface numbers, use the objects
hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentP…
Hm2AgentPortMask
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.8.10.2.1.3

hm2AgentSwitchVlanMacAssociationTable

table
.1.3.6.1.4.1.248.12.1.2.8.17.1 · 1 row entry · 3 columns
Open in standard view 
The switch's MAC To VLAN association table
hm2AgentSwitchVlanMacAssociationEntry entry .1.3.6.1.4.1.248.12.1.2.8.17.1.1
VLAN to be assigned to untagged or priority tagged
packets based on MAC address.
Indexes
hm2AgentSwitchVlanMacAssociationMacAddress hm2AgentSwitchVlanMacAssociationVlanId
Column Syntax OID
hm2AgentSwitchVlanMacAssociationMacAddress
The Mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.17.1.1.1
hm2AgentSwitchVlanMacAssociationVlanId
The VLAN the Mac address assigned to
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.17.1.1.2
hm2AgentSwitchVlanMacAssociationRowStatus
The Mac to VLAN association row status.

Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.17.1.1.3

hm2AgentSwitchProtectedPortTable

table
.1.3.6.1.4.1.248.12.1.2.8.18.1 · 1 row entry · 3 columns
Open in standard view 
The switch's protected port mapping table
hm2AgentSwitchProtectedPortEntry entry .1.3.6.1.4.1.248.12.1.2.8.18.1.1
Protected ports assigned to groups.
Indexes
hm2AgentSwitchProtectedPortGroupId
Column Syntax OID
hm2AgentSwitchProtectedPortGroupId
The group that this port belongs to
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.8.18.1.1.1
hm2AgentSwitchProtectedPortGroupName
The name of the group
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.248.12.1.2.8.18.1.1.2
hm2AgentSwitchProtectedPortPortList
The set of ports that are protected in this group
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.248.12.1.2.8.18.1.1.3

hm2AgentSwitchVlanSubnetAssociationTable

table
.1.3.6.1.4.1.248.12.1.2.8.19.1 · 1 row entry · 4 columns
Open in standard view 
The switch's Subnet To VLAN association table
hm2AgentSwitchVlanSubnetAssociationEntry entry .1.3.6.1.4.1.248.12.1.2.8.19.1.1
VLAN to be assigned to untagged or priority tagged
packets based on IP address and Subnet Mask.
Indexes
hm2AgentSwitchVlanSubnetAssociationIPAddress hm2AgentSwitchVlanSubnetAssociationSubnetMask hm2AgentSwitchVlanSubnetAssociationVlanId
Column Syntax OID
hm2AgentSwitchVlanSubnetAssociationIPAddress
The ip address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.19.1.1.1
hm2AgentSwitchVlanSubnetAssociationSubnetMask
The subnet mask
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.19.1.1.2
hm2AgentSwitchVlanSubnetAssociationVlanId
The VLAN that the IP address and subnet mask assigned to
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.19.1.1.3
hm2AgentSwitchVlanSubnetAssociationRowStatus
The Subnet to VLAN association row status.

Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.19.1.1.4

hm2AgentSwitchSnoopingQuerierCfgTable

table
.1.3.6.1.4.1.248.12.1.2.8.20.1 · 1 row entry · 4 columns
Open in standard view 
A table of the IGMP/MLD Snooping Querier Global configuration entries.
hm2AgentSwitchSnoopingQuerierCfgEntry entry .1.3.6.1.4.1.248.12.1.2.8.20.1.1
Represents entry for Snooping Querier Configuration.
Indexes
hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchSnoopingQuerierAdminMode
This enables or disables Snooping Querier on the system.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.20.1.1.1
hm2AgentSwitchSnoopingQuerierVersion
This specifies the multicast protocol versions that are
supported by the system.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.20.1.1.2
hm2AgentSwitchSnoopingQuerierQueryInterval
This specified the timer interval after which the system
generates general queries.
Integer32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.248.12.1.2.8.20.1.1.4
hm2AgentSwitchSnoopingQuerierExpiryInterval
This specified the timer interval after which the detected
other querier information is no longer valid.
Integer32r/w
Constraints:
range: 60-300
 .1.3.6.1.4.1.248.12.1.2.8.20.1.1.5

hm2AgentSwitchSnoopingQuerierVlanTable

table
.1.3.6.1.4.1.248.12.1.2.8.20.2 · 1 row entry · 8 columns
Open in standard view 
A table of the Snooping Querier Vlan configuration entries.
hm2AgentSwitchSnoopingQuerierVlanEntry entry .1.3.6.1.4.1.248.12.1.2.8.20.2.1
Represents entry for a Snooping Querier configurable Vlan.
Indexes
Q-BRIDGE-MIBdot1qVlanIndex hm2AgentSwitchSnoopingProtocol
Column Syntax OID
hm2AgentSwitchSnoopingQuerierVlanAdminMode
This enables or disables Snooping Querier on a selected Vlan interface.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.1
hm2AgentSwitchSnoopingQuerierVlanOperMode
This specifies the current state of the Snooping Querier on a selected vlan interface
Enumeration
Enumerated Values:
0disabled
1querier
2non-querier
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.2
hm2AgentSwitchSnoopingQuerierElectionParticipateMode deprecated
This object is deprecated.
This enables or disables the Snooping Querier Election Participation mode. When enabled
snooping querier switch will participate in querier election up on discovering another
querier in the s…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.3
hm2AgentSwitchSnoopingQuerierVlanAddress
This specifies the default source ip address to be used while generating general queries on
the specified vlan.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.4
hm2AgentSwitchSnoopingQuerierOperVersion
This specifies the multicast protocol version that is currently being used by the snooping
switch for the specified vlan while generating query messages.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.5
hm2AgentSwitchSnoopingQuerierOperMaxResponseTime
The amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for
a particular group in the interface participating in the vlan. This
object is valid onl…
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.6
hm2AgentSwitchSnoopingQuerierLastQuerierAddress
This specifies the last querier's ip address for the specified vlan.
It represents the detected other multicast querier in the vlan.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.7
hm2AgentSwitchSnoopingQuerierLastQuerierVersion
This specifies the multicast protocol version that is currently being used
by the detected other multicast querier for the specified vlan.
(-1) - indicates that parameter is not available.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.20.2.1.8

hm2AgentDaiVlanConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.21.4 · 1 row entry · 6 columns
Open in standard view 
A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
hm2AgentDaiVlanConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.21.4.1
A row instance contains the configuration for Dynamic
ARP Inspection at each existing VLAN.
Indexes
hm2AgentDaiVlanIndex
Column Syntax OID
hm2AgentDaiVlanIndex
This object indicates the VLAN number on which Dynamic ARP
Inspection feature is configured.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.1
hm2AgentDaiVlanDynArpInspEnable
This object indicates whether Dynamic ARP Inspection is
enabled in this VLAN.

If this object is set to 'true', Dynamic ARP Inspection
is enabled.

If this object is set to 'false', Dynamic A…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.2
hm2AgentDaiVlanLoggingEnable
This object indicates whether the Dynamic ARP Inspection
logging is enabled on this VlAN.
If this object is set to 'true', Dynamic ARP Inspection
logging is enabled.
If this object is set to 'false', Dynamic ARP Inspect…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.3
hm2AgentDaiVlanArpAclName
This object indicates the ARP ACL name set for this VLAN. Notice
that the ACL is regarded only if the corresponding row in
'agentArpAclTable' is active.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.4
hm2AgentDaiVlanArpAclStaticFlag
If an ARP ACL is defined for the VLAN and there is no match for
the received ARP packet, the further proceeding depends on this
MIB object. If it is 'true', then the packet is dropped, otherwise
the packet is checked ag…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.5
hm2AgentDaiVlanBindingCheckEnable
If enabled, the ARP frame received on an untrusted port (in a DAI
enabled VLAN) is checked against the ARP ACL and the DHCP Snooping
bindings database. If disabled it is only checked against the ARP
ACL.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.4.1.248

hm2AgentDaiVlanStatsTable

table
.1.3.6.1.4.1.248.12.1.2.8.21.6 · 1 row entry · 10 columns
Open in standard view 
A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
hm2AgentDaiVlanStatsEntry entry .1.3.6.1.4.1.248.12.1.2.8.21.6.1
A row instance contains the Dynamic ARP Inspection
statistics per VLAN.
Indexes
hm2AgentDaiVlanStatsIndex
Column Syntax OID
hm2AgentDaiVlanStatsIndex
This object indicates the VLAN number on which Dynamic ARP
Inspection statistics are retrieved.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.1
hm2AgentDaiVlanPktsForwarded
Number of valid ARP packets forwarded by DAI.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.2
hm2AgentDaiVlanPktsDropped
Number of invalid ARP packets dropped by DAI.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.3
hm2AgentDaiVlanDhcpDrops
Number of ARP packets that were dropped by DAI as
there is no matching DHCP Snooping binding entry found.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.4
hm2AgentDaiVlanDhcpPermits
Number of ARP packets that were forwarded by DAI as
there is a matching DHCP Snooping binding entry found.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.5
hm2AgentDaiVlanAclDrops
Number of ARP packets that were dropped by DAI as
there is no matching ARP ACL rule found for this Vlan and
the static flag is set on this vlan.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.6
hm2AgentDaiVlanAclPermits
Number of ARP packets that were permitted by DAI as
there is a matching ARP ACL rule found for this Vlan.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.7
hm2AgentDaiVlanSrcMacFailures
Number of ARP packets that were dropped by DAI as the
sender mac address in ARP packet didn't match the source
mac in ethernet header.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.8
hm2AgentDaiVlanDstMacFailures
Number of ARP packets that were dropped by DAI as the
target mac address in ARP reply packet didn't match the
destination mac in ethernet header.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.9
hm2AgentDaiVlanIpValidFailures
Number of ARP packets that were dropped by DAI as the
sender IP address in ARP packet or target IP address in
ARP reply packet is invalid. Invalid addresses include
0.0.0.0, 255.255.255.255, IP multicast addresses,
clas…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.21.6.1.10

hm2AgentDaiIfConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.21.7 · 1 row entry · 4 columns
Open in standard view 
A table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature.
hm2AgentDaiIfConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.21.7.1
A row instance contains the configuration for
Dynamic ARP Inspection at each physical
interface capable of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentDaiIfTrustEnable
This object indicates whether the interface is trusted for
Dynamic ARP Inspection purpose.

If this object is set to 'true', the interface is trusted.
ARP packets coming to this interface will be forwarded…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.7.1.1
hm2AgentDaiIfRateLimit
This object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets
exceeds the value of this object for consecutively
burst interval seconds, ARP packets will be
dropped. Valu…
packets per secondInteger32r/w
Constraints:
range: -1-300
 .1.3.6.1.4.1.248.12.1.2.8.21.7.1.2
hm2AgentDaiIfBurstInterval
This object indicates the burst interval value
for rate limiting purpose on this interface.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.248.12.1.2.8.21.7.1.3
hm2AgentDaiIfAutoDisable
This object indicates whether a port is auto-disabled when the
configured ARP threshold is exceeded.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.21.7.1.248

hm2AgentArpAclTable

table
.1.3.6.1.4.1.248.12.1.2.8.22.1 · 1 row entry · 2 columns
Open in standard view 
A table of the ARP ACL entries
hm2AgentArpAclEntry entry .1.3.6.1.4.1.248.12.1.2.8.22.1.1
Represents entry for an ARP ACL
Indexes
hm2AgentArpAclName
Column Syntax OID
hm2AgentArpAclName
Name of the ARP ACL, which must consist of 1 to 31 alphanumeric
characters and uniquely identify this ARP ACL. This object must
be set to complete a new ARP ACL row instance.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.248.12.1.2.8.22.1.1.1
hm2AgentArpAclRowStatus
The status of this conceptual row. Entries can not be deleted until all rows in
arpAclRuleTable with corresponding values of arpAclIndex have been deleted.

active(1) - This ACL instance is active.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.22.1.1.2

hm2AgentArpAclRuleTable

table
.1.3.6.1.4.1.248.12.1.2.8.22.2 · 1 row entry · 3 columns
Open in standard view 
A table of the ARP ACL Rule entries
hm2AgentArpAclRuleEntry entry .1.3.6.1.4.1.248.12.1.2.8.22.2.1
Represents entry for a set of ARP ACL-match rules
Indexes
hm2AgentArpAclName hm2AgentArpAclRuleMatchSenderIpAddr hm2AgentArpAclRuleMatchSenderMacAddr
Column Syntax OID
hm2AgentArpAclRuleMatchSenderIpAddr
Sender IP address match value for the ARP ACL.
This address must be a unicast address unequal to 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.22.2.1.1
hm2AgentArpAclRuleMatchSenderMacAddr
Sender MAC address match value for the ARP ACL.
This address must be a unicast address unequal to 00:0:00:00:00:00.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.22.2.1.2
hm2AgentArpAclRuleRowStatus
The status of this conceptual row.

active(1) - This ACL Rule is active.
notInService(2) - Row has been suspended.
notReady(3) - Row has incomplete values.
createAndGo(4) - Accept row val…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.22.2.1.3

hm2AgentDhcpSnoopingVlanConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.3 · 1 row entry · 2 columns
Open in standard view 
A table provides the mechanism to control DHCP SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
hm2AgentDhcpSnoopingVlanConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.3.1
A row instance contains the configuration for DHCP
SNOOPING at each existing VLAN.
Indexes
hm2AgentDhcpSnoopingVlanIndex
Column Syntax OID
hm2AgentDhcpSnoopingVlanIndex
This object indicates the VLAN number on which DHCP SNOOPING
Inspection feature is configured.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.23.3.1.1
hm2AgentDhcpSnoopingVlanEnable
This object indicates whether DHCP SNOOPING is
enabled in this VLAN.

If this object is set to 'true', DHCP SNOOPING
is enabled.

If this object is set to 'false', DHCP SNOOPING
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.3.1.2

hm2AgentDhcpSnoopingIfConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.4 · 1 row entry · 5 columns
Open in standard view 
A table provides the mechanism to configure the trust
state for DHCP snooping purpose at each physical
interface capable of this feature.
hm2AgentDhcpSnoopingIfConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.4.1
A row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentDhcpSnoopingIfTrustEnable
This object indicates whether the interface is trusted for
DHCP snooping purpose.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.4.1.1
hm2AgentDhcpSnoopingIfLogEnable
This object indicates whether the Logging needs on DHCP snooping validations
or not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.4.1.2
hm2AgentDhcpSnoopingIfRateLimit
This object indicates rate limit value for DHCP
Snooping purpose. If the incoming rate of DHCP packets
exceeds the value of this object for consecutively
burst interval seconds, DHCP packets will be
dropped. Value of -1…
packets per secondInteger32r/w
Constraints:
range: -1-150
 .1.3.6.1.4.1.248.12.1.2.8.23.4.1.3
hm2AgentDhcpSnoopingIfBurstInterval
This object indicates the burst interval value
for rate limiting purpose on this interface.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.248.12.1.2.8.23.4.1.4
hm2AgentDhcpSnoopingIfAutoDisable
This object indicates whether a port is auto-disabled when the
configured threshold is reached.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.4.1.248

hm2AgentIpsgIfConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.5 · 1 row entry · 2 columns
Open in standard view 
A table provides the mechanism to configure the IPSG
at each physical interface capable of this feature.
hm2AgentIpsgIfConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.5.1
A row instance contains the configuration for
IPSG at each physical interface capable of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentIpsgIfVerifySource
This object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source IP address
to be a valid client address. Setting this variable to false automaticall…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.5.1.1
hm2AgentIpsgIfPortSecurity
This object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source MAC address
to be a valid client address. The port security option cannot be enable…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.5.1.2

hm2AgentDhcpSnoopingStatsTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.7 · 1 row entry · 3 columns
Open in standard view 
A table provides the mechanism for statics of DHCP snooping.
hm2AgentDhcpSnoopingStatsEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.7.1
A row instance contains the DHCP snooping statistics per VLAN.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentDhcpSnoopingMacVerifyFailures
This object indicates the number of failure verifications of client mac address with
source mac address
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.23.7.1.1
hm2AgentDhcpSnoopingInvalidClientMessages
This object indicates the number of invalid DHCP releases and deny messages
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.23.7.1.2
hm2AgentDhcpSnoopingInvalidServerMessages
This object indicates the number of invalid DHCP server mesaages
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.23.7.1.3

hm2AgentStaticIpsgBindingTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.8 · 1 row entry · 6 columns
Open in standard view 
A table of the IPSG static entries
hm2AgentStaticIpsgBindingEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.8.1
Represents a binding in IPSG table
Indexes
hm2AgentStaticIpsgBindingIfIndex hm2AgentStaticIpsgBindingVlanId hm2AgentStaticIpsgBindingMacAddr hm2AgentStaticIpsgBindingIpAddr
Column Syntax OID
hm2AgentStaticIpsgBindingIfIndex
Interface on which this IPSG binding is going to be added.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.1
hm2AgentStaticIpsgBindingVlanId
VLAN to which this IPSG binding is going to be added.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.2
hm2AgentStaticIpsgBindingMacAddr
MAC address match value for the IPSG Binding.
This address must be a unicast address unequal to 00:0:00:00:00:00.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.3
hm2AgentStaticIpsgBindingIpAddr
IP address match value for the IPSG Binding.
This address must be a unicast address unequal to 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.4
hm2AgentStaticIpsgBindingRowStatus
The status of this conceptual row.

active(1) - This DHCP Snooping binding is active.
notInService(2) - Row has been suspended.
notReady(3) - Row has incomplete values.
createAndGo(4) - A…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.5
hm2AgentStaticIpsgBindingHwStatus
Set to true when Binding is applied to the Hardware
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.8.1.248

hm2AgentDynamicIpsgBindingTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.9 · 1 row entry · 5 columns
Open in standard view 
A table of the IPSG dynamic entries
hm2AgentDynamicIpsgBindingEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.9.1
Represents a binding in IPSG table
Indexes
hm2AgentDynamicIpsgBindingIfIndex hm2AgentDynamicIpsgBindingVlanId hm2AgentDynamicIpsgBindingMacAddr hm2AgentDynamicIpsgBindingIpAddr
Column Syntax OID
hm2AgentDynamicIpsgBindingIfIndex
Interface on which this IPSG binding is added.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.23.9.1.1
hm2AgentDynamicIpsgBindingVlanId
VLAN to which this IPSG binding is going to be added.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.23.9.1.2
hm2AgentDynamicIpsgBindingMacAddr
MAC address match value for the IPSG Binding.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.23.9.1.3
hm2AgentDynamicIpsgBindingIpAddr
Sender IP address match value for the IPSG Binding.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.23.9.1.4
hm2AgentDynamicIpsgBindingHwStatus
Set to true when Binding is applied to the Hardware
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.23.9.1.248

hm2AgentStaticDsBindingTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.10 · 1 row entry · 5 columns
Open in standard view 
A table of the DHCP SNOOPING static entries
hm2AgentStaticDsBindingEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.10.1
Represents a binding in DHCP SNOOPING table
Indexes
hm2AgentStaticDsBindingMacAddr
Column Syntax OID
hm2AgentStaticDsBindingIfIndex
Interface on which this DHCP SNOOPING binding is going to be added.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.23.10.1.1
hm2AgentStaticDsBindingVlanId
VLAN to which this DHCP SNOOPING binding is going to be added.
Q-BRIDGE-MIBVlanIdr/w
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.248.12.1.2.8.23.10.1.2
hm2AgentStaticDsBindingMacAddr
MAC address match value for the DHCP SNOOPING Binding.
This address must be a unicast address unequal to 00:0:00:00:00:00.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.23.10.1.3
hm2AgentStaticDsBindingIpAddr
IP address match value for the DHCP SNOOPING Binding.
This address must be a unicast address unequal to 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.23.10.1.4
hm2AgentStaticDsBindingRowStatus
The status of this conceptual row.

active(1) - This DHCP Snooping binding is active.
notInService(2) - Row has been suspended.
notReady(3) - Row has incomplete values.
createAndGo(4) - A…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.8.23.10.1.5

hm2AgentDynamicDsBindingTable

table
.1.3.6.1.4.1.248.12.1.2.8.23.11 · 1 row entry · 5 columns
Open in standard view 
A table of the DHCP SNOOPING Dynamic entries
hm2AgentDynamicDsBindingEntry entry .1.3.6.1.4.1.248.12.1.2.8.23.11.1
Represents a binding in DHCP SNOOPING table
Indexes
hm2AgentDynamicDsBindingMacAddr
Column Syntax OID
hm2AgentDynamicDsBindingIfIndex
Interface on which this DHCP SNOOPING binding is going to be added.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.23.11.1.1
hm2AgentDynamicDsBindingVlanId
VLAN to which this DHCP SNOOPING binding is going to be added.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.23.11.1.2
hm2AgentDynamicDsBindingMacAddr
MAC address match value for the DHCP SNOOPING Binding.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.23.11.1.3
hm2AgentDynamicDsBindingIpAddr
IP address match value for the DHCP SNOOPING Binding.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.12.1.2.8.23.11.1.4
hm2AgentDynamicDsBindingLeaseRemainingTime
This specifies the period for which the DHCP SNOOPING Binding is valid.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.23.11.1.5

hm2AgentDhcpL2RelayIfConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.24.2 · 1 row entry · 2 columns
Open in standard view 
A table provides the mechanism to enable/disable and configure
the trust state for DHCP L2Relay purpose at each physical
interface capable of this feature.
hm2AgentDhcpL2RelayIfConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.24.2.1
A row instance contains the configuration for
DHCP L2 Relay at each physical interface capable of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentDhcpL2RelayIfEnable
This object indicates whether the DHCP L2Relay is enabled
or not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.24.2.1.1
hm2AgentDhcpL2RelayIfTrustEnable
This object indicates whether the interface is trusted for
DHCP L2 Relay purpose.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.24.2.1.2

hm2AgentDhcpL2RelayVlanConfigTable

table
.1.3.6.1.4.1.248.12.1.2.8.24.3 · 1 row entry · 5 columns
Open in standard view 
A table provides the mechanism to control DHCP L2 Relay
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
hm2AgentDhcpL2RelayVlanConfigEntry entry .1.3.6.1.4.1.248.12.1.2.8.24.3.1
A row instance contains the configuration for DHCP
L2 Relay at each existing VLAN.
Indexes
hm2AgentDhcpL2RelayVlanIndex
Column Syntax OID
hm2AgentDhcpL2RelayVlanIndex
This object indicates the VLAN number on which DHCP L2 Relay
feature is configured.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.248.12.1.2.8.24.3.1.1
hm2AgentDhcpL2RelayVlanEnable
This object indicates whether DHCP L2 Relay is
enabled in this VLAN.

If this object is set to 'true', DHCP L2 Relay
is enabled.

If this object is set to 'false', DHCP L2 Relay
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.24.3.1.2
hm2AgentDhcpL2RelayCircuitIdVlanEnable
This object indicates whether DHCP CircuitId is
enabled for L2 relaying in this VLAN.

If this object is set to 'true', DHCP CircuitId
is enabled.

If this object is set to 'false', DHCP Circ…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.8.24.3.1.3
hm2AgentDhcpL2RelayRemoteIdVlanEnable
When this object is set with a non-empty string, DHCP RemoteId is
enabled for L2 relaying in this VLAN. Notice that you can set this
object only if hm2AgentDhcpL2RelayVlanRemoteIdType is 'other'.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.248.12.1.2.8.24.3.1.4
hm2AgentDhcpL2RelayVlanRemoteIdType
This option determines the content of the option 82 Remote ID.
ip(1) - inserts the IP address
mac(2) - inserts the MAC adress
client-id(3) - inserts the client identifier (sysName)
other(4) - inserts th…
Enumerationr/w
Enumerated Values:
1ip
2mac
3client-id
4other
 .1.3.6.1.4.1.248.12.1.2.8.24.3.1.248

hm2AgentDhcpL2RelayStatsTable

table
.1.3.6.1.4.1.248.12.1.2.8.24.7 · 1 row entry · 4 columns
Open in standard view 
A table provides the mechanism for statics of DHCP L2 Relay.
hm2AgentDhcpL2RelayStatsEntry entry .1.3.6.1.4.1.248.12.1.2.8.24.7.1
A row instance contains the DHCP L2Relay statistics per interface.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentDhcpL2RelayUntrustedSrvrMsgsWithOptn82
This object indicates the number of DHCP server messages received with Option-82 field
on the untrusted interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.24.7.1.1
hm2AgentDhcpL2RelayUntrustedClntMsgsWithOptn82
This object indicates the number of DHCP client messages received with Option-82 field
on the untrusted interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.24.7.1.2
hm2AgentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82
This object indicates the number of DHCP server messages received without Option-82 field
on the trusted interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.24.7.1.3
hm2AgentDhcpL2RelayTrustedClntMsgsWithoutOptn82
This object indicates the number of DHCP client messages received without Option-82 field
on the trusted interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.24.7.1.4

hm2AgentSwitchVoiceVlanDeviceTable

table
.1.3.6.1.4.1.248.12.1.2.8.25.2 · 1 row entry · 2 columns
Open in standard view 
A table of the Voice Vlan device entries.
hm2AgentSwitchVoiceVlanDeviceEntry entry .1.3.6.1.4.1.248.12.1.2.8.25.2.1
Represents entry for a Voice Device on the interface.
Indexes
hm2AgentSwitchVoiceVlanInterfaceNum hm2AgentSwitchVoiceVlanDeviceMacAddress
Column Syntax OID
hm2AgentSwitchVoiceVlanInterfaceNum
The interface number of this interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.1.2.8.25.2.1.1
hm2AgentSwitchVoiceVlanDeviceMacAddress
The Voice Device Mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.12.1.2.8.25.2.1.2

hm2AgentSdmTemplateTable

table
.1.3.6.1.4.1.248.12.1.2.8.28.1 · 1 row entry · 8 columns
Open in standard view 
Displays Switch Database Management Template Information.
hm2AgentSdmTemplateEntry entry .1.3.6.1.4.1.248.12.1.2.8.28.1.1
Information about a SDM Template table entry.
Indexes
hm2AgentSdmTemplateId
Column Syntax OID
hm2AgentSdmTemplateId
The SDM Template type this instance is associated with.
Enumeration
Enumerated Values:
2ipv4RoutingDefault
3ipv4DataCenter
10ipv4RoutingUnicast
11ipv4RoutingMulticast
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.1
hm2AgentArpEntries
The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.2
hm2AgentIPv4UnicastRoutes
The maximum number of IPv4 unicast forwarding table entries.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.3
hm2AgentIPv6NdpEntries
The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.4
hm2AgentIPv6UnicastRoutes
The maximum number of IPv6 unicast forwarding table entries.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.5
hm2AgentEcmpNextHops
The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.6
hm2AgentIPv4MulticastRoutes
The maximum number of IPv4 multicast forwarding table entries.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.7
hm2AgentIPv6MulticastRoutes
The maximum number of IPv6 multicast forwarding table entries.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.28.1.1.8

hm2AgentPrivateVlanTable

table
.1.3.6.1.4.1.248.12.1.2.8.31.1 · 1 row entry · 2 columns
Open in standard view 
A table of the Private VLAN configuration entries.
hm2AgentPrivateVlanEntry entry .1.3.6.1.4.1.248.12.1.2.8.31.1.1
Represents entry for a Private VLAN.
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
hm2AgentPrivateVlanType
Enables vlan for Private Vlan and configures private vlan type.
Enumerationr/w
Enumerated Values:
1primary
2isolated
3community
4unconfigured
 .1.3.6.1.4.1.248.12.1.2.8.31.1.1.1
hm2AgentPrivateVlanAssociate
This field lists all the VlanIDs which are associated with the selected vlan.
If the selected vlan type is not primary(1), a zero-length bitmask is returned.
VlanListr/w
Textual Convention: VlanList OctetString
 .1.3.6.1.4.1.248.12.1.2.8.31.1.1.2

hm2AgentPrivateVlanIntfAssocTable

table
.1.3.6.1.4.1.248.12.1.2.8.31.2 · 1 row entry · 5 columns
Open in standard view 
A table of the Private VLAN Interface configuration entries.
hm2AgentPrivateVlanIntfAssocEntry entry .1.3.6.1.4.1.248.12.1.2.8.31.2.1
Represents entry for a Private VLAN Interface.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentPrivateVlanIntfAssocHostPrimary
Configures the primary host vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocHostSecondary before
the association will be operational.

NOTE: Both hm2Agen…
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.248.12.1.2.8.31.2.1.1
hm2AgentPrivateVlanIntfAssocHostSecondary
Configures the secondary host vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocHostPrimary before
the association will be operational.
To remove host-association valu…
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.248.12.1.2.8.31.2.1.2
hm2AgentPrivateVlanIntfAssocPromiscuousPrimary
Configures the primary promiscuous vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocPromiscuousSecondary before
the association will be operational.
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.248.12.1.2.8.31.2.1.3
hm2AgentPrivateVlanIntfAssocPromiscuousSecondary
Configures the secondary promiscuous vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocPromiscuousPrimary before
the association will be operational.
VlanListr/w
Textual Convention: VlanList OctetString
 .1.3.6.1.4.1.248.12.1.2.8.31.2.1.4
hm2AgentPrivateVlanIntfAssocOperational
Shows the operational private vlans associated with the interface.
VlanList
Textual Convention: VlanList OctetString
 .1.3.6.1.4.1.248.12.1.2.8.31.2.1.5

hm2AgentSwitchGmrpPortTable

table
.1.3.6.1.4.1.248.12.1.2.8.249.10 · 1 row entry · 2 columns
Open in standard view 
GMRP control and status information for a bridge port.
Augments dot1dPortGmrpEntry in P-BRIDGE-MIB.
hm2AgentSwitchGmrpPortEntry entry .1.3.6.1.4.1.248.12.1.2.8.249.10.1
GMRP control and status information for a bridge port.
Augments dot1dPortGmrpEntry in P-BRIDGE-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentSwitchGmrpPortPktRx
The total number of GMRP packets received,
in all VLANs, on this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.249.10.1.1
hm2AgentSwitchGmrpPortPktTx
The total number of GMRP packets transmitted,
in all VLANs, on this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.249.10.1.2

hm2AgentSwitchGvrpPortTable

table
.1.3.6.1.4.1.248.12.1.2.8.249.15 · 1 row entry · 2 columns
Open in standard view 
GVRP control and status information for a bridge port.
Augments dot1qPortVlanEntry in Q-BRIDGE-MIB.
hm2AgentSwitchGvrpPortEntry entry .1.3.6.1.4.1.248.12.1.2.8.249.15.1
GVRP control and status information for a bridge port.
Augments dot1qPortVlanEntry in Q-BRIDGE-MIB.
Indexes
No indexes recorded
Column Syntax OID
hm2AgentSwitchGvrpPortPktRx
The total number of GVRP packets received on this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.249.15.1.1
hm2AgentSwitchGvrpPortPktTx
The total number of GVRP packets transmitted on this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.8.249.15.1.2

hm2AgentSwitchDVlanTagInterfaceTable

table
.1.3.6.1.4.1.248.12.1.2.8.250.1 · 1 row entry · 2 columns
Open in standard view 
A table that holds the double vlan tagging status per interface.
hm2AgentSwitchDVlanTagInterfaceEntry entry .1.3.6.1.4.1.248.12.1.2.8.250.1.1
A table entry specifying the double vlan tagging status per interface.
Indexes
hm2AgentSwitchDVlanTagInterfaceIfIndex
Column Syntax OID
hm2AgentSwitchDVlanTagInterfaceIfIndex
Interface ID on to which the double vlan tagging status is mapped
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.1.2.8.250.1.1.1
hm2AgentSwitchDVlanTagInterfaceStatus
Controls the Double Vlan Tag status on this interface.

When the value is enable(1), it becomes a core port.
If at least one port has value enable(1), all other
ports which have value disable(2) become …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.8.250.1.1.2

hm2AgentPortMirrorTable

table
.1.3.6.1.4.1.248.12.1.2.10.4 · 1 row entry · 11 columns
Open in standard view 
This table includes entries for each Port Mirroring session.
hm2AgentPortMirrorEntry entry .1.3.6.1.4.1.248.12.1.2.10.4.1
Provides configuration of a Port Mirroring session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping.
Indexes
hm2AgentPortMirrorSessionNum
Column Syntax OID
hm2AgentPortMirrorSessionNum
The Session number of this mirroring entry. The number of sessions is
fixed and platform dependant.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.10.4.1.1
hm2AgentPortMirrorDestinationPort
The port which traffic from the mirrored ports will be sent to.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.1.2.10.4.1.2
hm2AgentPortMirrorSourcePortMask
The ports from which traffic will be sent to the destination port.
The destination port can not be included in this list of ports.
Hm2AgentPortMaskr/w
Textual Convention: Hm2AgentPortMask OctetString
 .1.3.6.1.4.1.248.12.1.2.10.4.1.3
hm2AgentPortMirrorAdminMode
The status of this port mirroring session.

enable(1) - This session is active and all traffic from the source ports
will be mirrored to the destination port.
disable(2) - This session is not…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.10.4.1.4
hm2AgentPortMirrorSourceVlan
The vlan from which traffic will be sent to the destination port.
Unsigned32r/w
Constraints:
range: 0-4042
 .1.3.6.1.4.1.248.12.1.2.10.4.1.5
hm2AgentPortMirrorRemoteSourceVlan
The remote vlan from which traffic will be sent to the destination port.
Unsigned32r/w
Constraints:
range: 2-4042
range: 0-0
 .1.3.6.1.4.1.248.12.1.2.10.4.1.6
hm2AgentPortMirrorRemoteDestinationVlan
The VLAN that forwards the network traffic to the destination switch.
Unsigned32r/w
Constraints:
range: 2-4042
range: 0-0
 .1.3.6.1.4.1.248.12.1.2.10.4.1.7
hm2AgentPortMirrorReflectorPort
The port which traffic from the mirrored ports will be sent to in case of destination being remote VLAN.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.1.2.10.4.1.8
hm2AgentPortMirrorAllowMgmtMode
The status of the management access possibility for this session.

enable(1) - Management is allowed - The device is accessible via this port and is
responsive to protocols while mirroring the pr…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.10.4.1.9
hm2AgentPortMirrorReset
Removes, reset(2) the configuration for this session.
Returns always other(1) when read.
Enumerationr/w
Enumerated Values:
1other
2reset
 .1.3.6.1.4.1.248.12.1.2.10.4.1.248
hm2AgentPortMirrorDestinationPortSecondary
The secondary port which traffic from the mirrored
ports will be sent to.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.12.1.2.10.4.1.249

hm2AgentPortMirrorTypeTable

table
.1.3.6.1.4.1.248.12.1.2.10.5 · 1 row entry · 2 columns
Open in standard view 
This table includes entries for each source ports direction of port mirroring.
hm2AgentPortMirrorTypeEntry entry .1.3.6.1.4.1.248.12.1.2.10.5.1
Provides configuration of a Port Mirroring direction specifying the
session of the port mirroring and source port.
Indexes
hm2AgentPortMirrorSessionNum hm2AgentPortMirrorTypeSourcePort
Column Syntax OID
hm2AgentPortMirrorTypeSourcePort
The port from which traffic will be sent to the destination port.
This port should be a source port in the corresponding session.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.10.5.1.1
hm2AgentPortMirrorTypeType
The direction of the data to be mirrored on this source port.
none(0) - No configuration is set.
tx(1) - The data that is transmitted from the source port.
rx(2) - The data that is received on the source port.
txrx(3) …
Enumerationr/w
Enumerated Values:
0none
1tx
2rx
3txrx
 .1.3.6.1.4.1.248.12.1.2.10.5.1.2

hm2AgentDot3adAggPortTable

table
.1.3.6.1.4.1.248.12.1.2.12 · 1 row entry · 2 columns
Open in standard view 
This table provides 802.3ad link aggregation information for each
physical port that is not available through the standard MIB.
hm2AgentDot3adAggPortEntry entry .1.3.6.1.4.1.248.12.1.2.12.1
Information about a table entry. The hm2AgentDot3adAggPort identifies
the external interface number of the port.
Indexes
hm2AgentDot3adAggPort
Column Syntax OID
hm2AgentDot3adAggPort
ifIndex of this physical port
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.12.1.1
hm2AgentDot3adAggPortLACPMode
Enable/disable 802.3ad LACP on this port
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.12.1.2

hm2AgentPortConfigTable

table
.1.3.6.1.4.1.248.12.1.2.13 · 1 row entry · 27 columns
Open in standard view 
A table of the switch's physical port config entries
hm2AgentPortConfigEntry entry .1.3.6.1.4.1.248.12.1.2.13.1
Switch's physical port config entry
Indexes
hm2AgentPortDot1dBasePort
Column Syntax OID
hm2AgentPortDot1dBasePort
The number of this port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.248.12.1.2.13.1.1
hm2AgentPortIfIndex
The switchs Port IfIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.13.1.2
hm2AgentPortClearStats
Clear stats for this port only.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.10
hm2AgentPortDot3FlowControlMode
Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
symmetric flow control allows the port to send
and receive pause frames. …
Enumerationr/w
Enumerated Values:
1symmetric
2asymmetric
3disable
 .1.3.6.1.4.1.248.12.1.2.13.1.14
hm2AgentPortMaxFrameSizeLimit
This object identifies the largest value that can be
configured for hm2AgentPortMaxFrameSize.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.13.1.18
hm2AgentPortMaxFrameSize
This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set
to is the value of hm2AgentPortMaxFrameSizeLimit. For Ethernet ports
which support 8…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.13.1.19
hm2AgentPortBroadcastControlMode
If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.20
hm2AgentPortBroadcastControlThreshold
Configures the broadcast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate.
Integer32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.12.1.2.13.1.21
hm2AgentPortMulticastControlMode
If enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.22
hm2AgentPortMulticastControlThreshold
Configures the multicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate.
Integer32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.12.1.2.13.1.23
hm2AgentPortUnicastControlMode
If enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.24
hm2AgentPortUnicastControlThreshold
Configures the unicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate.
Integer32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.12.1.2.13.1.25
hm2AgentPortBroadcastControlThresholdUnit
Configures the units of the threshold value to percentage of
port speed or absolute packets per second.
Enumerationr/w
Enumerated Values:
1percent
2pps
 .1.3.6.1.4.1.248.12.1.2.13.1.26
hm2AgentPortMulticastControlThresholdUnit
Configures the units of the threshold value to percentage of
port speed or absolute packets per second.
Enumerationr/w
Enumerated Values:
1percent
2pps
 .1.3.6.1.4.1.248.12.1.2.13.1.27
hm2AgentPortUnicastControlThresholdUnit
Configures the units of the threshold value to percentage of
port speed or absolute packets per second.
Enumerationr/w
Enumerated Values:
1percent
2pps
 .1.3.6.1.4.1.248.12.1.2.13.1.28
hm2AgentPortVoiceVlanMode
Describes and Configures the Port Voice VLAN Mode. This object
can only be set to disable(5).
Enumerationr/w
Enumerated Values:
1none
2vlanid
3dot1p
4vlanidanddot1p
5untagged
6disable
 .1.3.6.1.4.1.248.12.1.2.13.1.29
hm2AgentPortVoiceVlanID
Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. 0 can not be set.
Integer32r/w
Constraints:
range: 0-4042
 .1.3.6.1.4.1.248.12.1.2.13.1.30
hm2AgentPortVoiceVlanPriority
Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured.
Integer32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.248.12.1.2.13.1.31
hm2AgentPortVoiceVlanDataPriorityMode
Describes and Configures the Port Voice VLAN Data Priority Mode.
Enumerationr/w
Enumerated Values:
1trust
2untrust
 .1.3.6.1.4.1.248.12.1.2.13.1.32
hm2AgentPortVoiceVlanOperationalStatus
Describes the Port Voice VLAN Operational Status.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.248.12.1.2.13.1.33
hm2AgentPortVoiceVlanUntagged
Describes and Configures the Port Voice VLAN tagging mode.
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.13.1.34
hm2AgentPortVoiceVlanNoneMode
Describes and Configures the Port Voice VLAN None mode.
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.13.1.35
hm2AgentPortVoiceVlanDSCP
Describes and Configures the Port Voice VLAN DSCP value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.12.1.2.13.1.36
hm2AgentPortVoiceVlanAuthMode
Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.37
hm2AgentPortDot3FlowControlOperStatus
This object identifies operational status of the flow control per port.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.248.12.1.2.13.1.38
hm2AgentPortSwitchportMode
Different types of Switchport modes.
Enumerationr/w
Enumerated Values:
1general
2access
3trunk
4host
5promiscuous
 .1.3.6.1.4.1.248.12.1.2.13.1.45
hm2AgentPortSfpLinkLossAlert
If enabled, this object helps in the detecting the loss of a SFP link by
deactivating its light.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.13.1.248

hm2AgentProtocolGroupTable

table
.1.3.6.1.4.1.248.12.1.2.14.2 · 1 row entry · 4 columns
Open in standard view 
A table of the switch's Protocol-based VLAN entries
hm2AgentProtocolGroupEntry entry .1.3.6.1.4.1.248.12.1.2.14.2.1
Switch's Protocol-based VLAN entry
Indexes
hm2AgentProtocolGroupId
Column Syntax OID
hm2AgentProtocolGroupId
Group identifier of the Protocol-based VLAN entry.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.14.2.1.1
hm2AgentProtocolGroupName
Group name of the Protocol-based VLAN entry.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.12.1.2.14.2.1.2
hm2AgentProtocolGroupVlanId
VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
Integer32r/w
Constraints:
range: 0-4093
 .1.3.6.1.4.1.248.12.1.2.14.2.1.3
hm2AgentProtocolGroupStatus
The status of the Protocol-based VLAN entry.

active(1) - this entry is active
createAndGo(4) - used to create a new entry
destroy(6) - remove this entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.14.2.1.7

hm2AgentProtocolGroupPortTable

table
.1.3.6.1.4.1.248.12.1.2.14.3 · 1 row entry · 2 columns
Open in standard view 
A table of the switch's physical port config entries
hm2AgentProtocolGroupPortEntry entry .1.3.6.1.4.1.248.12.1.2.14.3.1
Switch's physical port config entry
Indexes
hm2AgentProtocolGroupId hm2AgentProtocolGroupPortIfIndex
Column Syntax OID
hm2AgentProtocolGroupPortIfIndex
The interface number of this instance.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.12.1.2.14.3.1.1
hm2AgentProtocolGroupPortStatus
The status of this entry.

active(1) - the port is associated with this group
createAndGo(4) - add the port to this group
createAndWait(5) - add the port to this group
destroy(6) - remove th…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.14.3.1.2

hm2AgentProtocolGroupProtocolTable

table
.1.3.6.1.4.1.248.12.1.2.14.4 · 1 row entry · 2 columns
Open in standard view 
A table of the switch's physical port config entries
hm2AgentProtocolGroupProtocolEntry entry .1.3.6.1.4.1.248.12.1.2.14.4.1
Switch's physical port config entry
Indexes
hm2AgentProtocolGroupId hm2AgentProtocolGroupProtocolID
Column Syntax OID
hm2AgentProtocolGroupProtocolID
The protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137).
Other protocol Ids in the range 1536 to 65535 can also be configured.
Integer32
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.248.12.1.2.14.4.1.1
hm2AgentProtocolGroupProtocolStatus
The status of this entry.

active(1) - the port is associated with this group
createAndGo(4) - add the port to this group
createAndWait(5) - add the port to this group
destroy(6) - remove th…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.14.4.1.2

hm2AgentStpPortTable

table
.1.3.6.1.4.1.248.12.1.2.15.7 · 1 row entry · 9 columns
Open in standard view 
STP port table.
hm2AgentStpPortEntry entry .1.3.6.1.4.1.248.12.1.2.15.7.1
STP port entry.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentStpPortState
The administrative STP state for the port.

enable(1) - enables STP on the port.
disable(2) - disables STP on the port.

The default port STP state is enabled for the first 4095
ports and di…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.7.1.1
hm2AgentStpPortStatsMstpBpduRx
The MSTP BPDUs received on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.2
hm2AgentStpPortStatsMstpBpduTx
The MSTP BPDUs sent from a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.3
hm2AgentStpPortStatsRstpBpduRx
The RSTP BPDUs received on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.4
hm2AgentStpPortStatsRstpBpduTx
The RSTP BPDUs sent from a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.5
hm2AgentStpPortStatsStpBpduRx
The STP BPDUs received on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.6
hm2AgentStpPortStatsStpBpduTx
The STP BPDUs sent from a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.7
hm2AgentStpPortUpTime
Time since port was reset.
It is displayed in days, hours, minutes, and seconds.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.7.1.8
hm2AgentStpPortMigrationCheck
Force the specified port to transmit RSTP or MSTP BPDUs.

Supported values:
false(0) - BPDUs are not to be transmitted.
true(1) - BPDUs are to be transmitted

A non-zero value indicates that…
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.15.7.1.9

hm2AgentStpCstPortTable

table
.1.3.6.1.4.1.248.12.1.2.15.9 · 1 row entry · 20 columns
Open in standard view 
CIST port table.
hm2AgentStpCstPortEntry entry .1.3.6.1.4.1.248.12.1.2.15.9.1
CIST port entry.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentStpCstPortOperEdge
The MSTP operational status of a specific port for the CIST.
HM2-TC-MIBHmEnabledStatus
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.1
hm2AgentStpCstPortOperPointToPoint
The MSTP operational point to point mac of a specific port for the CIST.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.15.9.1.2
hm2AgentStpCstPortTopologyChangeAck
The MSTP topology change acknowledge for a specific port in the CIST.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.15.9.1.3
hm2AgentStpCstPortEdge
The administrative state of a specific port in CIST.

enable(1) - enables the port.
disable(2) - disables the port.

The default port state is disabled.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.4
hm2AgentStpCstPortForwardingState
The MSTP forwarding state of a specific port in CIST.
Enumeration
Enumerated Values:
1discarding
2learning
3forwarding
4disabled
5manualFwd
6notParticipate
 .1.3.6.1.4.1.248.12.1.2.15.9.1.5
hm2AgentStpCstPortId
The MSTP port identifier of a specific port in CIST.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.9.1.6
hm2AgentStpCstPortPathCost
The MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.
Unsigned32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.248.12.1.2.15.9.1.7
hm2AgentStpCstPortPriority
The MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128.
Unsigned32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.248.12.1.2.15.9.1.8
hm2AgentStpCstDesignatedBridgeId
The MSTP designated bridge ID of a specific port in CIST.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.248.12.1.2.15.9.1.9
hm2AgentStpCstDesignatedCost
The MSTP designated cost of a specific port in CIST.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.9.1.10
hm2AgentStpCstDesignatedPortId
The MSTP designated port ID of a specific port in CIST.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.9.1.11
hm2AgentStpCstExtPortPathCost
The MSTP external port path cost in CIST. The default value varies depending upon the link speed.
Unsigned32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.248.12.1.2.15.9.1.12
hm2AgentStpCstPortBpduGuardEffect
BPDU Guard Mode effect on the port.

enable(1) - BPDU Guard Mode is enabled on the port.
disable(2) - BPDU Guard Mode is disabled on the port.
HM2-TC-MIBHmEnabledStatus
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.13
hm2AgentStpCstPortBpduFilter
This command sets BPDU Filter mode on the port.

enable(1) - BPDU Filter Mode is enabled on the port.
disable(2) - BPDU Filter Mode is disabled on the port.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.14
hm2AgentStpCstPortBpduFlood
This command sets BPDU Flood mode on the port.

enable(1) - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.15
hm2AgentStpCstPortAutoEdge
This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.

enable(1) - enables the auto-edge mode for the port.
disable(2) - disa…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.16
hm2AgentStpCstPortRootGuard
This command sets a port to discard any superior information
received by the port and thus protect against root of the device
from changing.The port gets put into discarding state and does
not forward any packets.
…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.17
hm2AgentStpCstPortTCNGuard
This command restricts the port from propagating any topology change
information received through that port.

enable(1) - enables the TCN guard mode for the port.
disable(2) - disables the TCN guard mode …
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.18
hm2AgentStpCstPortLoopGuard
This command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member.

enable(1) - enables the loop guard mode for the port.
disable(2) - disabl…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.19
hm2AgentStpCstPortBpduFilterState
This command displays the BPDU Filter state on the port.

enable(1) - BPDU Filter Mode is active on the port.
disable(2) - BPDU Filter Mode is inactive on the port.
HM2-TC-MIBHmEnabledStatus
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.15.9.1.248

hm2AgentStpMstTable

table
.1.3.6.1.4.1.248.12.1.2.15.10 · 1 row entry · 10 columns
Open in standard view 
MST table.
hm2AgentStpMstEntry entry .1.3.6.1.4.1.248.12.1.2.15.10.1
MST entry.
Indexes
hm2AgentStpMstId
Column Syntax OID
hm2AgentStpMstId
The MSTP instance ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.10.1.1
hm2AgentStpMstBridgePriority
The MSTP bridge priority in a specific instance. The priority is
in the increments of 4096. The recommended default value is 32768.
Unsigned32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.248.12.1.2.15.10.1.2
hm2AgentStpMstBridgeIdentifier
The MSTP bridge identifier in a specific instance.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.248.12.1.2.15.10.1.3
hm2AgentStpMstDesignatedRootId
The MSTP designated root bridge identifier in a specific instance.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.248.12.1.2.15.10.1.4
hm2AgentStpMstRootPathCost
The MSTP root path cost in a specific instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.10.1.5
hm2AgentStpMstRootPortId
The MSTP root port ID in a specific instance.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.10.1.6
hm2AgentStpMstTimeSinceTopologyChange
The MSTP time since the last topology change in a specific instance.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.10.1.7
hm2AgentStpMstTopologyChangeCount
The MSTP count of topology changes in a specific instance.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.10.1.8
hm2AgentStpMstTopologyChangeParm
The MSTP topology change parameter in a specific instance.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.248.12.1.2.15.10.1.9
hm2AgentStpMstRowStatus
The MSTP instance status.

Supported values:
active(1) - valid instance.
notReady(3) - row has incomplete values.
createAndGo(4) - used to create a new instance.
destroy(6) …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.15.10.1.10

hm2AgentStpMstPortTable

table
.1.3.6.1.4.1.248.12.1.2.15.11 · 1 row entry · 17 columns
Open in standard view 
MST port table.
hm2AgentStpMstPortEntry entry .1.3.6.1.4.1.248.12.1.2.15.11.1
MST port entry.
Indexes
hm2AgentStpMstId IF-MIBifIndex
Column Syntax OID
hm2AgentStpMstPortForwardingState
The MSTP forwarding state of a specific port in a specific instance.
Enumeration
Enumerated Values:
1discarding
2learning
3forwarding
4disabled
5manualFwd
6notParticipate
 .1.3.6.1.4.1.248.12.1.2.15.11.1.1
hm2AgentStpMstPortId
The MSTP port identifier of a specific port in a specific instance.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.11.1.2
hm2AgentStpMstPortPathCost
The MSTP port path cost in a specific instance. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.
Unsigned32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.248.12.1.2.15.11.1.3
hm2AgentStpMstPortPriority
The MSTP port priority in a specific instance. The priority is
in the increments of 16. The default value is 128.
Unsigned32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.248.12.1.2.15.11.1.4
hm2AgentStpMstDesignatedBridgeId
The MSTP designated bridge ID of a specific port in a specific instance.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.248.12.1.2.15.11.1.5
hm2AgentStpMstDesignatedCost
The MSTP designated cost of a specific port in a specific instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.11.1.6
hm2AgentStpMstDesignatedPortId
The MSTP designated port ID of a specific port in a specific instance.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.11.1.7
hm2AgentStpMstPortLoopInconsistentState
The loop inconsistent state of a specific port in a specific instance.
This value can only report as true(1) when loop guard is enabled on the port
and the port has transitioned from blocking state in this MST instance.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.15.11.1.8
hm2AgentStpMstPortTransitionsIntoLoopInconsistentState
The number of times this interface has transitioned into loop inconsistent state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.11.1.9
hm2AgentStpMstPortTransitionsOutOfLoopInconsistentState
The number of times this interface has transitioned out of loop inconsistent state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.11.1.10
hm2AgentStpMstPortRole
The current port pole for a specific port (i.e., root, alternate, designated or backup) in a specific instance.
Enumeration
Enumerated Values:
1root
2alternate
3designated
4backup
5master
6disabled
 .1.3.6.1.4.1.248.12.1.2.15.11.1.248
hm2AgentStpCstAutoPortPathCost
The Spanning Tree auto port path cost. If the value is true, the port
path cost will be calculated depending on link speed corresponding to the
recommendation specified in IEEE 802.1s Table 13-2 which varies depending…
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.15.11.1.249
hm2AgentStpMstPortReceivedBridgeId
The received bridge ID on a specific port in a specific instance.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.248.12.1.2.15.11.1.250
hm2AgentStpMstPortReceivedRPC
The received root path cost of a specific port in a specific instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.11.1.251
hm2AgentStpMstPortReceivedPortId
The received port ID on a specific port in a specific instance.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.248.12.1.2.15.11.1.252
hm2AgentStpMstAutoPortPathCost
The Spanning Tree auto port path cost of a given instance. If the value
is true, the port path cost will be calculated depending on link speed
corresponding to the recommendation specified in IEEE 802.1s Table 13-2
w…
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.248.12.1.2.15.11.1.253
hm2AgentStpMstPortReceivedRegionalRPC
The received regional (internal) root path cost of a specific port in a specific instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.15.11.1.254

hm2AgentStpMstVlanTable

table
.1.3.6.1.4.1.248.12.1.2.15.12 · 1 row entry · 1 columns
Open in standard view 
MST VLAN table.
hm2AgentStpMstVlanEntry entry .1.3.6.1.4.1.248.12.1.2.15.12.1
MST VLAN entry.
Indexes
hm2AgentStpMstId Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
hm2AgentStpMstVlanRowStatus
The association status of an MSTP instance and a VLAN.

Supported values:
active(1) - valid association between an MSTP instance and a VLAN.
notReady(3) - inconsistent values for the the associatio…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.15.12.1.1

hm2AgentClassOfServicePortTable

table
.1.3.6.1.4.1.248.12.1.2.17.1 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the 802.1p priority
mapping to traffic class priority queue for every physical port.
hm2AgentClassOfServicePortEntry entry .1.3.6.1.4.1.248.12.1.2.17.1.1
A 802.1p priority mapped to a traffic class priority queue.
Indexes
IF-MIBifIndex hm2AgentClassOfServicePortPriority
Column Syntax OID
hm2AgentClassOfServicePortPriority
The Priority value determined for the received frame.
This value is equivalent to the priority indicated in
the tagged frame received, or one of the evaluated
priorities, determined according to the media type.
…
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.12.1.2.17.1.1.1
hm2AgentClassOfServicePortClass
Traffic class priority queue the received frame is mapped to.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.12.1.2.17.1.1.2

hm2AgentKeepalivePortTable

table
.1.3.6.1.4.1.248.12.1.2.31 · 1 row entry · 12 columns
Open in standard view 
Keepalive port table.
hm2AgentKeepalivePortEntry entry .1.3.6.1.4.1.248.12.1.2.31.1
Keepalive port table.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2AgentKeepalivePortState
The keepalive state for the port.

enable(1) - enables keepalive on the port.
disable(2) - disables keepalive on the port.

The default port keepalive state is disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.248.12.1.2.31.1.1
hm2AgentKeepalivePortLoopDetected
Keepalive status for the port.

yes (1) - loop detected on the port.
no (2) - no loop detected on the port.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.248.12.1.2.31.1.2
hm2AgentKeepalivePortLoopCount
The loop count on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.31.1.3
hm2AgentKeepalivePortRxAction
Action on detecting a loop on the port.

trap (10) - send a trap.
auto-disable (11) - execute auto disable configured action.
all (12) - all above mentioned actions.
Enumerationr/w
Enumerated Values:
10trap
11auto-disable
12all
 .1.3.6.1.4.1.248.12.1.2.31.1.5
hm2AgentKeepalivePortLastLoopDetectedTime
TimeStamp when last loop was detected on a port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.248.12.1.2.31.1.7
hm2AgentKeepalivePortTpidType
Type of TPID to be used for loop protection or None if no vlan based loop protection is required.
Enumerationr/w
Enumerated Values:
0none
1dot1q
2dot1ad
 .1.3.6.1.4.1.248.12.1.2.31.1.8
hm2AgentKeepalivePortVlanId
Vlan Id to be used for loop protection or None if no vlan based loop protection is required.
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.248.12.1.2.31.1.9
hm2AgentKeepalivePortMode
The keepalive mode for the port.

active(1) - enables transmission of keepalive check frames.
passive(2) - disables transmission of check frames, only reception is active.

The default port …
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.248.12.1.2.31.1.248
hm2AgentKeepalivePortTxFrameCount
The amount of keepalive check frames sent on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.31.1.249
hm2AgentKeepalivePortRxFrameCount
The amount of keepalive check frames received on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.31.1.250
hm2AgentKeepalivePortDiscardFrameCount
The amount of keepalive check frames discarded on a specific port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.12.1.2.31.1.251
hm2AgentKeepalivePortStatsClear
Clear keepalive statistics on a specific port. When read always returns 'other'.
Enumerationr/w
Enumerated Values:
1other
2clear
 .1.3.6.1.4.1.248.12.1.2.31.1.252

hm2AgentPortRedirectTable

table
.1.3.6.1.4.1.248.12.1.2.248.1 · 1 row entry · 3 columns
Open in standard view 
This table includes entries for each Redirect session.
hm2AgentPortRedirectEntry entry .1.3.6.1.4.1.248.12.1.2.248.1.1
Provides configuration of a Redirect session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping.
Indexes
hm2AgentPortRedirectDestinationPort
Column Syntax OID
hm2AgentPortRedirectDestinationPort
The port which traffic from the redirected ports will be sent to.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.248.12.1.2.248.1.1.1
hm2AgentPortRedirectSourcePortMask
The ports from which traffic will be redirected to the destination port.
The destination port can not be included in this list of ports.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.248.12.1.2.248.1.1.2
hm2AgentPortRedirectRowStatus
The status of this port mirroring session.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.12.1.2.248.1.1.3