hm2AgentLagSummaryMaxFrameSize
HM2-PLATFORM-SWITCHING-MIB ·
.1.3.6.1.4.1.248.12.1.2.2.2.1.249
Object
This object identifies the currently configured maximum frame size value for this port. The maximum value that this object can be set to is the value of hm2AgentLagSummaryMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
Context
- MIB
- HM2-PLATFORM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.248.12.1.2.2.2.1.249- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2AgentLagSummaryConfigEntry
- Table
- hm2AgentLagSummaryConfigTable
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentLagSummaryLagIndex Agent LAG IfIndex.
This value corresponds with the LAG interface in the ifTable. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.1 |
| hm2AgentLagSummaryType Agent LAG Type.
static(1) - This LAG is staticly maintained.
dynamic(2) - This LAG is dynamicly maintained. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.2.2.1.10 |
| hm2AgentLagSummaryStaticCapability Agent LAG Static Capability
enable(1) - Static capability is enabled for this LAG interface
disable(2) - Static capability is disabled for this LAG interface | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.11 |
| hm2AgentLagSummaryHashOption LAG Hashing Option.
Valid values correspond to
1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination M… | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.2.2.1.12 |
| hm2AgentLagSummaryMinimumActiveLinks Agent LAG Threshold.
This configures the threshold(i.e minimum number of active ports)
value for trunk port . | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.13 |
| hm2AgentLagSummaryName Agent LAG Name.
The associated name of the LAG used during creation. | column | OctetString | .1.3.6.1.4.1.248.12.1.2.2.2.1.2 |
| hm2AgentLagSummaryMaxFrameSizeLimit This object identifies the largest value that can be
configured for hm2AgentLagSummaryMaxFrameSize. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.248 |
| hm2AgentLagSummaryFlushTimer obsolete Agent LAG FlushTimer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.3 |
| hm2AgentLagSummaryLinkTrap Agent LAG LinkTrap.
Configures sending Link Up/Down traps when the LAG interface goes Up or Down. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.4 |
| hm2AgentLagSummaryAdminMode Agent LAG AdminMode.
Administratively enables or disables this LAG interface. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.5 |
| hm2AgentLagSummaryStpMode Agent LAG StpMode
Administratively enables or disables STP on this interface. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.6 |
| hm2AgentLagSummaryAddPort Agent LAG AddPort.
Set to a non 0 value to add a port to the LAG. Values correspond to
ifIndex values in the ifTable.
Note: agentPortType for the po… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.7 |
| hm2AgentLagSummaryDeletePort Agent LAG DeletePort.
Set to a non 0 value to remove a port from the LAG. Values correspond to
ifIndex values in the ifTable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.8 |
| hm2AgentLagSummaryStatus Agent LAG Status.
active(1) - This LAG is enabled.
destroy(6) - Set to this value to remove the LAG. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.9 |