hm2AgentPortVoiceVlanUntagged
HM2-PLATFORM-SWITCHING-MIB ·
.1.3.6.1.4.1.248.12.1.2.13.1.34
Object
column
r/w
Enumeration
Describes and Configures the Port Voice VLAN tagging mode.
Context
- MIB
- HM2-PLATFORM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.248.12.1.2.13.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2AgentPortConfigEntry
- Table
- hm2AgentPortConfigTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | false |
1 | true |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentPortDot1dBasePort The number of this port. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.1 |
| hm2AgentPortClearStats Clear stats for this port only. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.10 |
| hm2AgentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
symmetric flow control allows the… | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.14 |
| hm2AgentPortMaxFrameSizeLimit This object identifies the largest value that can be
configured for hm2AgentPortMaxFrameSize. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.18 |
| hm2AgentPortMaxFrameSize This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set
to is the value of hm2AgentPortMaxFrameSizeLi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.19 |
| hm2AgentPortIfIndex The switchs Port IfIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.2 |
| hm2AgentPortBroadcastControlMode If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the c… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.20 |
| hm2AgentPortBroadcastControlThreshold Configures the broadcast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.21 |
| hm2AgentPortMulticastControlMode If enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the c… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.22 |
| hm2AgentPortMulticastControlThreshold Configures the multicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.23 |
| hm2AgentPortUnicastControlMode If enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast
traffic on this Ethernet port exceeds the… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.24 |
| hm2AgentPortSfpLinkLossAlert If enabled, this object helps in the detecting the loss of a SFP link by
deactivating its light. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.248 |
| hm2AgentPortUnicastControlThreshold Configures the unicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.25 |
| hm2AgentPortBroadcastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.26 |
| hm2AgentPortMulticastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.27 |
| hm2AgentPortUnicastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.28 |
| hm2AgentPortVoiceVlanMode Describes and Configures the Port Voice VLAN Mode. This object
can only be set to disable(5). | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.29 |
| hm2AgentPortVoiceVlanID Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. 0 can not be set. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.30 |
| hm2AgentPortVoiceVlanPriority Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.31 |
| hm2AgentPortVoiceVlanDataPriorityMode Describes and Configures the Port Voice VLAN Data Priority Mode. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.32 |
| hm2AgentPortVoiceVlanOperationalStatus Describes the Port Voice VLAN Operational Status. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.33 |
| hm2AgentPortVoiceVlanNoneMode Describes and Configures the Port Voice VLAN None mode. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.35 |
| hm2AgentPortVoiceVlanDSCP Describes and Configures the Port Voice VLAN DSCP value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.36 |
| hm2AgentPortVoiceVlanAuthMode Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.37 |
| hm2AgentPortDot3FlowControlOperStatus This object identifies operational status of the flow control per port. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.38 |
| hm2AgentPortSwitchportMode Different types of Switchport modes. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.45 |