hm2AgentPortMaxFrameSize
HM2-PLATFORM-SWITCHING-MIB ·
.1.3.6.1.4.1.248.12.1.2.13.1.19
Object
This object identifies the currently configured maximum frame size value for this port. The maximum value that this object can be set to is the value of hm2AgentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
Context
- MIB
- HM2-PLATFORM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.248.12.1.2.13.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2AgentPortConfigEntry
- Table
- hm2AgentPortConfigTable
- Siblings
- 26
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentPortDot1dBasePort The number of this port. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.1 |
| hm2AgentPortClearStats Clear stats for this port only. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.10 |
| hm2AgentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
symmetric flow control allows the… | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.14 |
| hm2AgentPortMaxFrameSizeLimit This object identifies the largest value that can be
configured for hm2AgentPortMaxFrameSize. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.18 |
| hm2AgentPortIfIndex The switchs Port IfIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.2 |
| hm2AgentPortBroadcastControlMode If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the c… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.20 |
| hm2AgentPortBroadcastControlThreshold Configures the broadcast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.21 |
| hm2AgentPortMulticastControlMode If enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the c… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.22 |
| hm2AgentPortMulticastControlThreshold Configures the multicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.23 |
| hm2AgentPortUnicastControlMode If enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast
traffic on this Ethernet port exceeds the… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.24 |
| hm2AgentPortSfpLinkLossAlert If enabled, this object helps in the detecting the loss of a SFP link by
deactivating its light. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.248 |
| hm2AgentPortUnicastControlThreshold Configures the unicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.25 |
| hm2AgentPortBroadcastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.26 |
| hm2AgentPortMulticastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.27 |
| hm2AgentPortUnicastControlThresholdUnit Configures the units of the threshold value to percentage of
port speed or absolute packets per second. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.28 |
| hm2AgentPortVoiceVlanMode Describes and Configures the Port Voice VLAN Mode. This object
can only be set to disable(5). | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.29 |
| hm2AgentPortVoiceVlanID Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. 0 can not be set. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.30 |
| hm2AgentPortVoiceVlanPriority Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.13.1.31 |
| hm2AgentPortVoiceVlanDataPriorityMode Describes and Configures the Port Voice VLAN Data Priority Mode. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.32 |
| hm2AgentPortVoiceVlanOperationalStatus Describes the Port Voice VLAN Operational Status. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.33 |
| hm2AgentPortVoiceVlanUntagged Describes and Configures the Port Voice VLAN tagging mode. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.34 |
| hm2AgentPortVoiceVlanNoneMode Describes and Configures the Port Voice VLAN None mode. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.35 |
| hm2AgentPortVoiceVlanDSCP Describes and Configures the Port Voice VLAN DSCP value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.13.1.36 |
| hm2AgentPortVoiceVlanAuthMode Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.13.1.37 |
| hm2AgentPortDot3FlowControlOperStatus This object identifies operational status of the flow control per port. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.38 |
| hm2AgentPortSwitchportMode Different types of Switchport modes. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.13.1.45 |