hm2AgentStpCstPortAutoEdge

HM2-PLATFORM-SWITCHING-MIB · .1.3.6.1.4.1.248.12.1.2.15.9.1.16
MIB view Table view

Object

column r/w HM2-TC-MIBHmEnabledStatus 
This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
              
enable(1)  - enables the auto-edge mode for the port.
disable(2) - disables the auto-edge mode for the port.
              
The default auto-edge mode is enabled.

Context

MIB
HM2-PLATFORM-SWITCHING-MIB
OID
.1.3.6.1.4.1.248.12.1.2.15.9.1.16
Type
column
Access
readwrite
Status
current
Parent
hm2AgentStpCstPortEntry
Table
hm2AgentStpCstPortTable
Siblings
19

Syntax

HM2-TC-MIBHmEnabledStatus
Source
HM2-TC-MIBHmEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2AgentStpCstPortOperEdge
The MSTP operational status of a specific port for the CIST.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.1
hm2AgentStpCstDesignatedCost
The MSTP designated cost of a specific port in CIST.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.12.1.2.15.9.1.10
hm2AgentStpCstDesignatedPortId
The MSTP designated port ID of a specific port in CIST.
columnOctetString.1.3.6.1.4.1.248.12.1.2.15.9.1.11
hm2AgentStpCstExtPortPathCost
The MSTP external port path cost in CIST. The default value varies depending upon the link speed.
columnUnsigned32.1.3.6.1.4.1.248.12.1.2.15.9.1.12
hm2AgentStpCstPortBpduGuardEffect
BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.13
hm2AgentStpCstPortBpduFilter
This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.14
hm2AgentStpCstPortBpduFlood
This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.15
hm2AgentStpCstPortRootGuard
This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.17
hm2AgentStpCstPortTCNGuard
This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the TCN guard mode for the port. d…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.18
hm2AgentStpCstPortLoopGuard
This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guar…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.19
hm2AgentStpCstPortOperPointToPoint
The MSTP operational point to point mac of a specific port for the CIST.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.15.9.1.2
hm2AgentStpCstPortBpduFilterState
This command displays the BPDU Filter state on the port. enable(1) - BPDU Filter Mode is active on the port. disable(2) - BPDU Filter Mode is inactive on the port.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.248
hm2AgentStpCstPortTopologyChangeAck
The MSTP topology change acknowledge for a specific port in the CIST.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.15.9.1.3
hm2AgentStpCstPortEdge
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disable…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.15.9.1.4
hm2AgentStpCstPortForwardingState
The MSTP forwarding state of a specific port in CIST.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.15.9.1.5
hm2AgentStpCstPortId
The MSTP port identifier of a specific port in CIST.
columnOctetString.1.3.6.1.4.1.248.12.1.2.15.9.1.6
hm2AgentStpCstPortPathCost
The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
columnUnsigned32.1.3.6.1.4.1.248.12.1.2.15.9.1.7
hm2AgentStpCstPortPriority
The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
columnUnsigned32.1.3.6.1.4.1.248.12.1.2.15.9.1.8
hm2AgentStpCstDesignatedBridgeId
The MSTP designated bridge ID of a specific port in CIST.
columnOctetString.1.3.6.1.4.1.248.12.1.2.15.9.1.9