hm2AgentStpCstPortOperEdge
HM2-PLATFORM-SWITCHING-MIB ·
.1.3.6.1.4.1.248.12.1.2.15.9.1.1
Object
column
HM2-TC-MIBHmEnabledStatus
The MSTP operational status of a specific port for the CIST.
Context
- MIB
- HM2-PLATFORM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.248.12.1.2.15.9.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hm2AgentStpCstPortEntry
- Table
- hm2AgentStpCstPortTable
- Siblings
- 19
Syntax
HM2-TC-MIBHmEnabledStatus
- Source
- HM2-TC-MIBHmEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentStpCstDesignatedCost The MSTP designated cost of a specific port in CIST. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.12.1.2.15.9.1.10 |
| hm2AgentStpCstDesignatedPortId The MSTP designated port ID of a specific port in CIST. | column | OctetString | .1.3.6.1.4.1.248.12.1.2.15.9.1.11 |
| hm2AgentStpCstExtPortPathCost The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | column | Unsigned32 | .1.3.6.1.4.1.248.12.1.2.15.9.1.12 |
| hm2AgentStpCstPortBpduGuardEffect BPDU Guard Mode effect on the port.
enable(1) - BPDU Guard Mode is enabled on the port.
disable(2) - BPDU Guard Mode is disabled on the port. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.13 |
| hm2AgentStpCstPortBpduFilter This command sets BPDU Filter mode on the port.
enable(1) - BPDU Filter Mode is enabled on the port.
disable(2) - BPDU Filter Mode is disabled on the port. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.14 |
| hm2AgentStpCstPortBpduFlood This command sets BPDU Flood mode on the port.
enable(1) - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.15 |
| hm2AgentStpCstPortAutoEdge This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
enable(1) - enables the auto-e… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.16 |
| hm2AgentStpCstPortRootGuard This command sets a port to discard any superior information
received by the port and thus protect against root of the device
from changing.The port gets put into discarding state… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.17 |
| hm2AgentStpCstPortTCNGuard This command restricts the port from propagating any topology change
information received through that port.
enable(1) - enables the TCN guard mode for the port.
d… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.18 |
| hm2AgentStpCstPortLoopGuard This command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member.
enable(1) - enables the loop guar… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.19 |
| hm2AgentStpCstPortOperPointToPoint The MSTP operational point to point mac of a specific port for the CIST. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.15.9.1.2 |
| hm2AgentStpCstPortBpduFilterState This command displays the BPDU Filter state on the port.
enable(1) - BPDU Filter Mode is active on the port.
disable(2) - BPDU Filter Mode is inactive on the port. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.248 |
| hm2AgentStpCstPortTopologyChangeAck The MSTP topology change acknowledge for a specific port in the CIST. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.15.9.1.3 |
| hm2AgentStpCstPortEdge The administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disable… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.15.9.1.4 |
| hm2AgentStpCstPortForwardingState The MSTP forwarding state of a specific port in CIST. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.15.9.1.5 |
| hm2AgentStpCstPortId The MSTP port identifier of a specific port in CIST. | column | OctetString | .1.3.6.1.4.1.248.12.1.2.15.9.1.6 |
| hm2AgentStpCstPortPathCost The MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed. | column | Unsigned32 | .1.3.6.1.4.1.248.12.1.2.15.9.1.7 |
| hm2AgentStpCstPortPriority The MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128. | column | Unsigned32 | .1.3.6.1.4.1.248.12.1.2.15.9.1.8 |
| hm2AgentStpCstDesignatedBridgeId The MSTP designated bridge ID of a specific port in CIST. | column | OctetString | .1.3.6.1.4.1.248.12.1.2.15.9.1.9 |