hm2AgentPortDot3FlowControlMode

HM2-PLATFORM-SWITCHING-MIB · .1.3.6.1.4.1.248.12.1.2.13.1.14
MIB view Table view

Object

column r/w Enumeration 
Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
symmetric flow control allows the port to send
and receive pause frames. Enabling asymmetric
flow control allows the port to receive pause
frames but it will not transmit pause frames.

Context

MIB
HM2-PLATFORM-SWITCHING-MIB
OID
.1.3.6.1.4.1.248.12.1.2.13.1.14
Type
column
Access
readwrite
Status
current
Parent
hm2AgentPortConfigEntry
Table
hm2AgentPortConfigTable
Siblings
26

Syntax

Enumeration

Values & Constraints

Enumerated Values
1symmetric
2asymmetric
3disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2AgentPortDot1dBasePort
The number of this port.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.1
hm2AgentPortClearStats
Clear stats for this port only.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.10
hm2AgentPortMaxFrameSizeLimit
This object identifies the largest value that can be configured for hm2AgentPortMaxFrameSize.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.12.1.2.13.1.18
hm2AgentPortMaxFrameSize
This object identifies the currently configured maximum frame size value for this port. The maximum value that this object can be set to is the value of hm2AgentPortMaxFrameSizeLi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.12.1.2.13.1.19
hm2AgentPortIfIndex
The switchs Port IfIndex.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.12.1.2.13.1.2
hm2AgentPortBroadcastControlMode
If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the c…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.20
hm2AgentPortBroadcastControlThreshold
Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.21
hm2AgentPortMulticastControlMode
If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the c…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.22
hm2AgentPortMulticastControlThreshold
Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.23
hm2AgentPortUnicastControlMode
If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.24
hm2AgentPortSfpLinkLossAlert
If enabled, this object helps in the detecting the loss of a SFP link by deactivating its light.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.248
hm2AgentPortUnicastControlThreshold
Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.25
hm2AgentPortBroadcastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.26
hm2AgentPortMulticastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.27
hm2AgentPortUnicastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.28
hm2AgentPortVoiceVlanMode
Describes and Configures the Port Voice VLAN Mode. This object can only be set to disable(5).
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.29
hm2AgentPortVoiceVlanID
Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID. 0 can not be set.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.30
hm2AgentPortVoiceVlanPriority
Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured.
columnInteger32.1.3.6.1.4.1.248.12.1.2.13.1.31
hm2AgentPortVoiceVlanDataPriorityMode
Describes and Configures the Port Voice VLAN Data Priority Mode.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.32
hm2AgentPortVoiceVlanOperationalStatus
Describes the Port Voice VLAN Operational Status.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.33
hm2AgentPortVoiceVlanUntagged
Describes and Configures the Port Voice VLAN tagging mode.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.34
hm2AgentPortVoiceVlanNoneMode
Describes and Configures the Port Voice VLAN None mode.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.35
hm2AgentPortVoiceVlanDSCP
Describes and Configures the Port Voice VLAN DSCP value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.12.1.2.13.1.36
hm2AgentPortVoiceVlanAuthMode
Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.12.1.2.13.1.37
hm2AgentPortDot3FlowControlOperStatus
This object identifies operational status of the flow control per port.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.38
hm2AgentPortSwitchportMode
Different types of Switchport modes.
columnEnumeration.1.3.6.1.4.1.248.12.1.2.13.1.45