hm2AgentLagSummaryMaxFrameSizeLimit
HM2-PLATFORM-SWITCHING-MIB ·
.1.3.6.1.4.1.248.12.1.2.2.2.1.248
Object
column
SNMPv2-SMIInteger32
This object identifies the largest value that can be configured for hm2AgentLagSummaryMaxFrameSize.
Context
- MIB
- HM2-PLATFORM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.248.12.1.2.2.2.1.248- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hm2AgentLagSummaryConfigEntry
- Table
- hm2AgentLagSummaryConfigTable
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2AgentLagSummaryLagIndex Agent LAG IfIndex.
This value corresponds with the LAG interface in the ifTable. | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.1 |
| hm2AgentLagSummaryType Agent LAG Type.
static(1) - This LAG is staticly maintained.
dynamic(2) - This LAG is dynamicly maintained. | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.2.2.1.10 |
| hm2AgentLagSummaryStaticCapability Agent LAG Static Capability
enable(1) - Static capability is enabled for this LAG interface
disable(2) - Static capability is disabled for this LAG interface | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.11 |
| hm2AgentLagSummaryHashOption LAG Hashing Option.
Valid values correspond to
1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination M… | column | Enumeration | .1.3.6.1.4.1.248.12.1.2.2.2.1.12 |
| hm2AgentLagSummaryMinimumActiveLinks Agent LAG Threshold.
This configures the threshold(i.e minimum number of active ports)
value for trunk port . | column | Integer32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.13 |
| hm2AgentLagSummaryName Agent LAG Name.
The associated name of the LAG used during creation. | column | OctetString | .1.3.6.1.4.1.248.12.1.2.2.2.1.2 |
| hm2AgentLagSummaryMaxFrameSize This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set
to is the value of hm2AgentLagSummaryMaxFrame… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.249 |
| hm2AgentLagSummaryFlushTimer obsolete Agent LAG FlushTimer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.3 |
| hm2AgentLagSummaryLinkTrap Agent LAG LinkTrap.
Configures sending Link Up/Down traps when the LAG interface goes Up or Down. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.4 |
| hm2AgentLagSummaryAdminMode Agent LAG AdminMode.
Administratively enables or disables this LAG interface. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.5 |
| hm2AgentLagSummaryStpMode Agent LAG StpMode
Administratively enables or disables STP on this interface. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.6 |
| hm2AgentLagSummaryAddPort Agent LAG AddPort.
Set to a non 0 value to add a port to the LAG. Values correspond to
ifIndex values in the ifTable.
Note: agentPortType for the po… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.7 |
| hm2AgentLagSummaryDeletePort Agent LAG DeletePort.
Set to a non 0 value to remove a port from the LAG. Values correspond to
ifIndex values in the ifTable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.12.1.2.2.2.1.8 |
| hm2AgentLagSummaryStatus Agent LAG Status.
active(1) - This LAG is enabled.
destroy(6) - Set to this value to remove the LAG. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.12.1.2.2.2.1.9 |