ES-RACKTIVITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
411

eESNTable

table
.1.3.6.1.4.1.34097.9.65.1 · 1 row entry · 65 columns
Open in standard view 
Temperature Humidity Presure Airflow Waterleak
eESNEntry entry .1.3.6.1.4.1.34097.9.65.1.1
Temperature Humidity Presure Airflow Waterleak
Indexes
esnModuleIndex esnIndex
Column Syntax OID
aGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.1
aSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.2
aCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.3
aVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUhundredth
Textual Convention: Uhundredth Unsigned32
 .1.3.6.1.4.1.34097.9.65.1.1.4
aStatePortCur
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
CURPORTSTATE
Textual Convention: CURPORTSTATE Enumeration
Type Values:
0portOff
1portOnNoWarning
2portOff1
3portOnWithWarningCurrent
4portOff2
5portOnWithWarningPower
6portOff3
7portOnWithWarningCurrentAndPower
8portOffWithError
9portOnNoWarning1
10portOffWithError1
11portOnWithWarningCurrent1
12portOffWithError2
13portOnWithWarningPower1
14portOffWithError3
15portOnWithWarnCurrentAndPower1
16portOffWithDelayOn
17portOnNoWarning2
18portOffWithDelayOn1
19portOnWithWarningCurrent2
20portOffWithDelayOn2
21portOnWithWarningPower2
22portOffWithDelayOn3
23portOnWithWarnCurrentAndPower2
 .1.3.6.1.4.1.34097.9.65.1.1.8
aTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.65.1.1.11
aHumidity
Gets the relative humidity. (unit: 0.1RH)
RHUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.65.1.1.12
aAirflow
Gets the current airflow level. (unit: 0.1m/s)
m/sUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.65.1.1.23
aDewPoint
Gets the current dewpoint. Taking the current humidity into consideration, condensation will occur if the temperature drops below this level. (unit: 0.1K)
KUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.25
aPressure
Gets the atmospheric pressure. (unit: 0.1hPa)
hPaUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.65.1.1.26
aAnalogueInput
Gets the value of an analog input (voltage). (unit: mV)
mVSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.27
aWaterleak
Gets the current state of the water leak sensor.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.28
aMotionDetected
Gets or resets whether motion has been detected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.65.1.1.29
aIOPort
Gets the state of a digital input.
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.65.1.1.30
aHighCurrent
The current for high values (unit: 0.1A)
AInteger32
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.41
aHighPower
The power for high values (unit: 0.01kW)
kWInteger32
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.43
aModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10001
aFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.65.1.1.10002
aHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.65.1.1.10003
aFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10004
aHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10005
aDisplayTimeOn
Gets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)
minUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.65.1.1.10032
aMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10047
aMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10049
aMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.65.1.1.10052
aMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.65.1.1.10053
aMinHumidityWarning
Gets, sets or defaults the minimum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)
RHUnsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.65.1.1.10054
aMaxHumidityWarning
Gets, sets or defaults the maximum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)
RHUnsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.65.1.1.10055
aCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10078
aPowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10080
aVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10086
aTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10087
aHumidityWarningEvent
Enables or disables the SNMP trap if the humidity warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10088
aDewPointWarning
Gets, sets or defaults the dewpoint warning level. If the temperature difference between the current temperature and the dewpoint temperature drops below this value, an event is generated. (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10092
aDewPointWarningEvent
Enables or disables the SNMP trap if the dewpoint warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10093
aDewPointViolationEvent
Enables or disables the SNMP trap if the dewpoint temperature is reached.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10094
aPressureWarningEvent
Enables or disables the SNMP trap if the atmospheric pressure warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10095
aMinPressureWarning
Gets, sets or defaults the minimum atmospheric pressure warning level. (unit: 0.1hPa)
hPaUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10096
aMaxPressureWarning
Gets, sets or defaults the maximum atmospheric pressure warning level. (unit: 0.1hPa)
hPaUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10097
aDisplayBrightness
Gets, sets or defaults the display brightness (if supported).
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.65.1.1.10098
aMotionSensitivity
Gets, sets or defaults the sensitivity of a motion sensor.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.34097.9.65.1.1.10107
aExternalSensorLabel
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10109
aRelayLabel
Gets, sets or defaults an Energy Sensor relay label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10110
aMinAnalogueInputWarning
Gets, sets or defaults the lower warning level for an analog input. A warning is generated if this level is exceeded. (unit: mV)
mVUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10111
aMaxAnalogueInputWarning
Gets, sets or defaults the upper warning level for an analog input. A warning is generated if this level is exceeded.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10112
aWaterleakWarning
Gets, sets or defaults the water leak detection state (0 = disabled, other values = enabled).
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10113
aMinAirflowWarning
Gets, sets or defaults the minimum warning level for an airflow sensor. A warning is generated if this level is exceeded.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10114
aMaxAirflowWarning
Gets, sets or defaults the maximum warning level for an airflow sensor. A warning is generated if this level is exceeded.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.65.1.1.10115
aAnalogueInputWarningEvent
Enables or disables the SNMP trap if the analog input warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10116
aWaterleakWarningEvent
Enables or disables the SNMP trap if a water leak is detected.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10117
aAirflowWarningEvent
Enables or disables the SNMP trap if the airflow warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10118
aRelayAssertActionEvent
Enables or disables the SNMP trap if an Energy Sensor relay is asserted.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10119
aRelayDeassertActionEvent
Enables or disables the SNMP trap if an Energy Sensor relay is deasserted.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10120
aMotionWarning
Gets, sets or defaults the motion warning threshold.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.34097.9.65.1.1.10141
aMotionWarningEvent
Enables or disables the SNMP trap if the motion warning threshold is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10149
aDeviceID
The ID of the device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10150
aDeviceVersion
The version of the device.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.65.1.1.10151
aSysName
The full name of the device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.65.1.1.10152
aMaxHighCurrentWarning
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.10165
aMinHighCurrentWarning
Gets sets or defaults the minimum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.10176
aMinHighPowerWarning
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.10177
aMaxHighPowerWarning
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.65.1.1.10178
aIOPortWarningEvent
Enables or disables the SNMP trap if the IO Port change state.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.65.1.1.10192
esnIndex
Index for the selected ESN Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.65.1.1.65537
esnModuleIndex
Selected ESN Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.65.1.1.65538

eThreePhasePowerTable

table
.1.3.6.1.4.1.34097.9.66.1 · 1 row entry · 2 columns
Open in standard view 
NO_INFO
eThreePhasePowerEntry entry .1.3.6.1.4.1.34097.9.66.1.1
NO_INFO
Indexes
threephasepowerModuleIndex threephasepowerIndex
Column Syntax OID
threephasepowerIndex
Index for the selected ThreePhasePower Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.66.1.1.65537
threephasepowerModuleIndex
Selected ThreePhasePower Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.66.1.1.65538

eDisplayModuleTable

table
.1.3.6.1.4.1.34097.9.68.1 · 1 row entry · 15 columns
Open in standard view 
NO_INFO
eDisplayModuleEntry entry .1.3.6.1.4.1.34097.9.68.1.1
NO_INFO
Indexes
displaymoduleModuleIndex displaymoduleIndex
Column Syntax OID
dGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.68.1.1.1
dSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.68.1.1.2
dCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.68.1.1.3
dTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.68.1.1.11
dTimeOnline
Gets the amount of seconds since the last reset. (unit: s)
sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.68.1.1.24
dModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.68.1.1.10001
dFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.68.1.1.10002
dHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.68.1.1.10003
dFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.68.1.1.10004
dHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.68.1.1.10005
dMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.68.1.1.10052
dMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.68.1.1.10053
dDisplayAllDevices
If a display need to show all devices or just a small list
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.68.1.1.10237
displaymoduleIndex
Index for the selected DisplayModule Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.68.1.1.65537
displaymoduleModuleIndex
Selected DisplayModule Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.68.1.1.65538

eEnergyMonitorTable

table
.1.3.6.1.4.1.34097.9.69.1 · 1 row entry · 43 columns
Open in standard view 
NO_INFO
eEnergyMonitorEntry entry .1.3.6.1.4.1.34097.9.69.1.1
NO_INFO
Indexes
energymonitorModuleIndex energymonitorIndex
Column Syntax OID
eGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.1
eSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.2
eCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.3
eVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUhundredth
Textual Convention: Uhundredth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.4
eFrequency
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
HzUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.5
eCurrent
Gets the current of an outlet. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.6
ePower
Gets the power of an outlet. (unit: W)
WSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.7
eActiveEnergy
Gets the energy used by an outlet. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.9
eApparentEnergy
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
kVAhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.10
eTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.11
eApparentPower
Gets the apparent power of an outlet. (unit: VA)
VASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.15
ePowerFactor
Gets the power factor of an outlet. (unit: %)
%SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.16
eTotalCurrent
Gets the total current of a power module. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.17
eTotalRealPower
Gets the total power level of a power module. (unit: W)
WSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.18
eTotalApparentPower
Gets the total apparent power of a power module. (unit: VA)
VASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.19
eTotalActiveEnergy
Gets the total energy of a power module. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.20
eTotalApparentEnergy
Gets the total apparent energy of a power module. (unit: 0.001kVAh)
kVAhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.69.1.1.21
eTotalPowerFactor
Gets the total power factor of a power module. (unit: %)
%SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.22
eTimeOnline
Gets the amount of seconds since the last reset. (unit: s)
sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.69.1.1.24
eTotalHarmonicDistortion
total harmonic distortion - outlet (unit: 0.1%)
%Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.69.1.1.50
eModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.69.1.1.10001
eFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.69.1.1.10002
eHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.69.1.1.10003
eFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.69.1.1.10004
eHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.69.1.1.10005
eMaxCurrentWarning
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-8000
 .1.3.6.1.4.1.34097.9.69.1.1.10039
eMaxPowerWarning
Gets, sets or defaults the maximum power warning level of an outlet. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-2000
 .1.3.6.1.4.1.34097.9.69.1.1.10041
eMaxTotalCurrentWarning
Gets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-16000
 .1.3.6.1.4.1.34097.9.69.1.1.10043
eMaxTotalPowerWarning
Gets, sets or defaults the maximum total power warning level. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-4000
 .1.3.6.1.4.1.34097.9.69.1.1.10045
eMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.69.1.1.10047
eMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.69.1.1.10049
eMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.69.1.1.10052
eMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.69.1.1.10053
eCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10078
ePowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10080
eTotalCurrentWarningEvent
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10082
eTotalPowerWarningEvent
Enables or disables the SNMP trap if the total power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10084
eVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10086
eTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10087
eMicroIntTimeThreshold
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
msUnsigned32r/w
Constraints:
range: 10-65535
 .1.3.6.1.4.1.34097.9.69.1.1.10135
eMicroIntEvent
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.69.1.1.10136
energymonitorIndex
Index for the selected EnergyMonitor Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.69.1.1.65537
energymonitorModuleIndex
Selected EnergyMonitor Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.69.1.1.65538

eMasterTable

table
.1.3.6.1.4.1.34097.9.77.1 · 1 row entry · 126 columns
Open in standard view 
NO_INFO
eMasterEntry entry .1.3.6.1.4.1.34097.9.77.1.1
NO_INFO
Indexes
masterModuleIndex masterIndex
Column Syntax OID
mGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.1
mSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.2
mCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.3
mVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUhundredth
Textual Convention: Uhundredth Unsigned32
 .1.3.6.1.4.1.34097.9.77.1.1.4
mTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.77.1.1.11
mCurrentIP
Gets the current IP address. To set the IP address, use IPADDR instead.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.14
mTotalCurrent
Gets the total current of a power module. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.77.1.1.17
mTotalRealPower
Gets the total power level of a power module. (unit: W)
WSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.18
mTotalActiveEnergy
Gets the total energy of a power module. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.77.1.1.20
mLineCurrent
Gets the current line current. (unit: 0.001A)
AUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.32
mFuseCurrent
Gets the current through a fuse. (unit: 0.001A)
AUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.33
mCurrentSubNetMask
Gets the current subnet mask. To set the subnet mask use SNMSK instead.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.34
mCurrentDNSServer
Gets the current DNS server. To set the DNS server use DNSSRV instead.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.35
mCurrentStdGateway
Gets the current standard gateway. To set the standard gateway use STDGW instead.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.36
mUPSPresent
Checks if a UPS is present.
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.37
mUPSStatus
Gets the working status of a UPS (if its working on its batteries or not).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.38
mUPSEstimatedRunTime
Gets the estimated run time of a UPS. (unit: min)
minUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.39
mUPSBatteryLevel
The current UPS battery level. (unit: 0.1%)
%Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.77.1.1.40
mHighCurrent
The current for high values (unit: 0.1A)
AStenth
Textual Convention: Stenth Integer32
 .1.3.6.1.4.1.34097.9.77.1.1.41
mUpsCommunicationStatus
Status information of communication with the UPS
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.42
mHighPower
The power for high values (unit: 0.01kW)
kWInteger32
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.43
mTotalHighCurrent
The current for high values (unit: 0.1A)
AInteger32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.44
mTotalHighPower
The power for high values (unit: 0.01kW)
kWInteger32
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.45
mPositiveEnergy
Gets the positive energy used by an outlet. (unit: 0.001kWh)
kWhUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.46
mNegativeEnergy
Gets the negative energy used by an outlet. (unit: 0.001kWh)
kWhUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.47
mTotalPositiveEnergy
Gets the positive energy of the module. (unit: 0.001kWh)
kWhUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.48
mTotalNegativeEnergy
Gets the negative energy of the module. (unit: 0.001kWh)
kWhUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.34097.9.77.1.1.49
mCloudStatus
Gets the status of the connection with the cloud. 0 = Idle state; 1 = Disabled; 2 = Initialising; 3 = Initialising - No connection; 4 = Initialising - No key; 5 = Connection Ok; 6 = Connection Failed; 7 = Connection Fai…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.77.1.1.56
mStatus
status of a module
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.1000
mModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10001
mFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10002
mHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10003
mFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10004
mHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10005
mRackName
Gets, sets or defaults the name of the rack.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10006
mRackPosition
Gets, sets or defaults the position in the rack.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10007
mIPAddress
Gets, sets or defaults the IP address (when DHCP is disabled).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10011
mSubNetMask
Gets, sets or defaults the subnet mask (when DHCP is disabled).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10012
mStdGateWay
Gets, sets or defaults the standard gateway (when DHCP is disabled).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10013
mDnsServer
Gets, sets or defaults the IP address of the used DNS server (when DHCP is disabled).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10014
mMAC
Gets the MAC address of a master module.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.34097.9.77.1.1.10015
mDHCPEnable
Enables, disables or defaults DHCP. Set to 1 to enable DHCP, or 0 to disable DHCP.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10016
mNTPServer
Gets, sets or defaults the NTP (Network Time Protocol) server IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10017
mUseDefaultNTPServer
Enables, disables or defaults the usage of the default NTP (Network Time Protocol) server (pool.ntp.org).
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10018
mUseNTP
Enables, disables or defaults NTP (Network Time Protocol). Set to 1 to enable NTP, or 0 to disable NTP.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10019
mSNMPTrapRecvIP
Gets, sets or defaults the SNMP trap receiver IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10020
mSNMPTrapRecvPort
Gets, sets or defaults the SNMP tap receiver port.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10021
mSNMPControl
Enables, disables or defaults write access over SNMP. Set to 1 to disable write access, or 0 to enable write access.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10024
mECSServer
Gets, sets or defaults the ECS (Energy Cloud Sentinel) server IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10028
mUseECSServer
Enables, disables or defaults the use of an ECS (Energy Cloud Sentinel) server. Set to 1 to enable or 0 to disable.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10029
mDisplayLock
Gets, sets or defaults the display lock. If the display is locked, you can still view information on the display, but you are not allowed to change settings through the menu system.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.77.1.1.10031
mDisplayTimeOn
Gets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)
minUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.77.1.1.10032
mMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10047
mMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10049
mMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.77.1.1.10052
mMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.77.1.1.10053
mGeneralEventEnable
Gets, sets or defaults general events. If set to 0, no events will be generated. Set to 1 to generate events on media indicated by the event bitfields.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10074
mSNMPSysContact
Gets, sets or defaults the SNMP contact information.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10075
mCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10078
mPowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10080
mTotalCurrentWarningEvent
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10082
mTotalPowerWarningEvent
Enables or disables the SNMP trap if the total power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10084
mVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10086
mTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10087
mDisplayBrightness
Gets, sets or defaults the display brightness (if supported).
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.77.1.1.10098
mECSServerPort
Gets, sets or defaults the ECS (Energy Cloud Sentinel) server port.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10106
mExternalSensorLabel
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10109
mHttpsOnly
Enables or disables the use of HTTPS (secure HTTP). Set to 1 to enable HTTPS only, or 0 to also enable HTTP.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10127
mTelnetSsl
Enables or disables the use of Telnet SSL (secure Telnet). Set to 1 to enable Telnet SSL, or 0 to disable Telnet SSL).
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10128
mCookieTimeToLive
The TTL (Time To Live) of the website cookie. (unit: min)
minUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10130
mLineCurrentWarningThreshold
Gets, sets the warning threshold of the linecurrent. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10131
mLineCurrentOffThreshold
Gets, sets the off threshold of the linecurrent. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.77.1.1.10132
mLineCurrentWarningEvent
Enables or disables the SNMP trap if the linecurrent warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10133
mLineCurrentOffEvent
Enables or disables the SNMP trap if the linecurrent off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10134
mFuseCurrentWarningThreshold
Gets, sets or defaults the maximum current warning threshold per fuse. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 0-32000
 .1.3.6.1.4.1.34097.9.77.1.1.10142
mFuseCurrentOffThreshold
Gets, sets or defaults the maximum current off threshold per fuse. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 0-32000
 .1.3.6.1.4.1.34097.9.77.1.1.10143
mFuseCurrentWarningEvent
Enables or disables the SNMP trap if the fusecurrent warning threshold is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10144
mFuseCurrentOffEvent
Enables or disables the SNMP trap if the fusecurrent off threshold is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10145
mDeviceID
The ID of the device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10150
mDeviceVersion
The version of the device.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10151
mSysName
The full name of the device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10152
mElectricalTopology
Gets the electrical topology of the unit.
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.34097.9.77.1.1.10153
mFusePortTopology
Gets the topology between the outlets and fuses.
Unsigned32
Constraints:
range: 0-6
 .1.3.6.1.4.1.34097.9.77.1.1.10154
mLineFuseTopology
Gets the topology between the inlet (cable or connection) and the fuses.
Unsigned32
Constraints:
range: 0-3
 .1.3.6.1.4.1.34097.9.77.1.1.10155
mSSOIPAddress
Gets, sets the IP address of an SSO (Smart Style Office).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.77.1.1.10156
mSSOLoginCredentials
Gets, sets the login credentials of an SSO (Smart Style Office).
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10157
mSSOGracefullShutdown
Gets, sets the string to send if the UPS' battery level is below the set threshold.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10158
mUPSWarningLevel
Gets, sets or defaults the graceful shutdown threshold of a UPS.
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.77.1.1.10159
mUPSOffLevel
Gets, sets or defaults the threshold of a UPS to set outlets off.
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.77.1.1.10160
mMaxHighCurrentWarning
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10165
mUpsMonitoringProtocol
Disables/Enables UPS monitoring and selects the protocol used for UPS monitoring. 0 = Disabled; 1 = Use old APC protocol
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10167
mUpsEmergencyThreshold
When the UPS battery level goes below this threshold a shutdown request will be sent to all agents (unit: 0.1%)
%Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.77.1.1.10168
mUpsRecoveryThreshold
When the UPS battery level goes above this threshold a outlets will be powered on as configured by the user (unit: 0.1%)
%Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.77.1.1.10169
mUpsEventFlags
Event flags for events related to the UPS monitoring
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.77.1.1.10170
mRecoveryPowerThreshold
When the UPS was on battery and it went below UPSEMERGTHRES, the outlets that have a load below the RECOVPOWERTHRES will be power cycled once the UPS is back on mains power and exceeds UPSRECOVTHRES (unit: W)
WUnsigned32r/w
Constraints:
range: 20-4000
 .1.3.6.1.4.1.34097.9.77.1.1.10171
mMinHighCurrentWarning
Gets sets or defaults the minimum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10176
mMinHighPowerWarning
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10177
mMaxHighPowerWarning
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10178
mHeartbeatInterval
Interval (in seconds) between 2 heartbeat SNMP traps, Set to 0 to disable (unit: s)
sUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.77.1.1.10179
mMinTotalHighCurrentWarning
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10180
mMaxTotalHighCurrentWarning
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
AInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10181
mMinTotalHighPowerWarning
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10182
mMaxTotalHighPowerWarning
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
kWInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10183
mCloudState
Set if the device needs to push info to the init cloud (val=0) or to the normal cloud (val=1)
Unsigned32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.34097.9.77.1.1.10208
mSensorBias
get or set the DC sensor bias (unit: mV)
mVInteger32r/w
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.34097.9.77.1.1.10210
mDaisyChainDeviceMode
allowed modes: 0: standalone (master without daisy chain slaves) 1: daisy chain master 2: daisy chain slave 1 3: daisy chain slave 2 4: daisy chain slave 3
Unsigned32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.34097.9.77.1.1.10211
mSNMPTrapUser
Gets, sets or defaults the SNMP tap user out of the user list.
Unsigned32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.34097.9.77.1.1.10212
mUSMUser
Gets, sets or defaults the SNMP USM security user
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10213
mUSMAuthPassphrase
Gets, sets or defaults the SNMP USM authentication passphrase (Always MD5)
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10214
mUSMPrivPassphrase
Gets, sets or defaults the SNMP USM private passphrase (Always AES)
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10215
mSNMPV2GetSetEnable
Gets, sets or defaults the SNMP V2 Enable for get ,set or walk but not for traps.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10216
mSNMPV3GetSetEnable
Gets, sets or defaults the SNMP V3 Enable for get ,set or walk but not for traps.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10217
mUSMAuthPassphraseLength
Gets, sets or defaults the SNMP USM authentication passphrase length
Unsigned32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.34097.9.77.1.1.10218
mUSMPrivPassphraseLength
Gets, sets or defaults the SNMP USM private passphrase length
Unsigned32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.34097.9.77.1.1.10219
mSNMPTrapEnable
Gets, sets or defaults the SNMP Trap Enable per trap account
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10222
mLDAPAttribute
Attribute linked to the LDAPFilter
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10227
mLDAPPath
Relative Path to be used for the LDAPFilter
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10228
mLDAPAdminGroupName
GroupName for Admin Credentials in LDAP
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10229
mLDAPRestrictedGroupName
GroupName for Restricted Credentials in LDAP
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10230
mLDAPGuestGroupName
GroupName for Guest Credentials in LDAP
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10231
mLDAPEnable
Enable or disable login via LDAP credentials
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10232
mLDAPLoginWrapper
Wrapper for login in with LDAP
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10233
mLDAPServer
NO_INFO
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.77.1.1.10235
mLocalAuthEnable
Set if local authentication is still possible if LDAP is enabled
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.77.1.1.10236
masterIndex
Index for the selected Master Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.77.1.1.65537
masterModuleIndex
Selected Master Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.77.1.1.65538

ePowerTable

table
.1.3.6.1.4.1.34097.9.80.1 · 1 row entry · 88 columns
Open in standard view 
NO_INFO
ePowerEntry entry .1.3.6.1.4.1.34097.9.80.1.1
NO_INFO
Indexes
powerModuleIndex powerIndex
Column Syntax OID
pGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.1
pSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.2
pCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.3
pVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUhundredth
Textual Convention: Uhundredth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.4
pFrequency
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
HzUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.5
pCurrent
Gets the current of an outlet. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.6
pPower
Gets the power of an outlet. (unit: W)
WSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.7
pStatePortCur
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
CURPORTSTATE
Textual Convention: CURPORTSTATE Enumeration
Type Values:
0portOff
1portOnNoWarning
2portOff1
3portOnWithWarningCurrent
4portOff2
5portOnWithWarningPower
6portOff3
7portOnWithWarningCurrentAndPower
8portOffWithError
9portOnNoWarning1
10portOffWithError1
11portOnWithWarningCurrent1
12portOffWithError2
13portOnWithWarningPower1
14portOffWithError3
15portOnWithWarnCurrentAndPower1
16portOffWithDelayOn
17portOnNoWarning2
18portOffWithDelayOn1
19portOnWithWarningCurrent2
20portOffWithDelayOn2
21portOnWithWarningPower2
22portOffWithDelayOn3
23portOnWithWarnCurrentAndPower2
 .1.3.6.1.4.1.34097.9.80.1.1.8
pActiveEnergy
Gets the energy used by an outlet. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.9
pApparentEnergy
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
kVAhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.10
pTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.11
pApparentPower
Gets the apparent power of an outlet. (unit: VA)
VASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.15
pPowerFactor
Gets the power factor of an outlet. (unit: %)
%SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.16
pTotalCurrent
Gets the total current of a power module. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.17
pTotalRealPower
Gets the total power level of a power module. (unit: W)
WSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.18
pTotalApparentPower
Gets the total apparent power of a power module. (unit: VA)
VASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.19
pTotalActiveEnergy
Gets the total energy of a power module. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.20
pTotalApparentEnergy
Gets the total apparent energy of a power module. (unit: 0.001kVAh)
kVAhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.21
pTotalPowerFactor
Gets the total power factor of a power module. (unit: %)
%SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.22
pTimeOnline
Gets the amount of seconds since the last reset. (unit: s)
sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.24
pTotalHarmonicDistortion
total harmonic distortion - outlet (unit: 0.1%)
%Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.80.1.1.50
pPhase
the phase between 2 waves (unit: degr)
degrUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.80.1.1.51
pBigCurrent
Gets the current of an outlet. (unit: 0.0001A)
ASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.80.1.1.52
pBigPower
Gets the power of an outlet. (unit: 0.001W)
WUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.53
pBigApparentPower
Gets the apparent power of an outlet. (unit: 0.001VA)
VAUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.80.1.1.54
pDetectedPhase
Gives the best matching Phase per currentsensor. Updated every 8s. returnes 255 if no good phaselink is found
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.80.1.1.55
pModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.80.1.1.10001
pFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.80.1.1.10002
pHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.80.1.1.10003
pFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.80.1.1.10004
pHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.80.1.1.10005
pPortName
Gets, sets or defaults the name of an outlet.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.80.1.1.10034
pPortState
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
Unsigned32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.34097.9.80.1.1.10035
pCurrentPriorOff
Gets, sets or defaults the priority of an outlet. Priority settings are used when 1 or more outlets must be turned off because the total current of a power module was exceeded.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.80.1.1.10036
pDelayOn
Gets, sets or defaults the outlet turn-on delay. Use this to reduce inrush current when the Energy Switch boots. (unit: s)
sUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.80.1.1.10037
pMaxCurrentOff
Gets, sets or defaults the maximum current off level of an outlet. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-8000
 .1.3.6.1.4.1.34097.9.80.1.1.10038
pMaxCurrentWarning
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-8000
 .1.3.6.1.4.1.34097.9.80.1.1.10039
pMaxPowerOff
Gets, sets or defaults the maximum power off level of an outlet. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-2000
 .1.3.6.1.4.1.34097.9.80.1.1.10040
pMaxPowerWarning
Gets, sets or defaults the maximum power warning level of an outlet. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-2000
 .1.3.6.1.4.1.34097.9.80.1.1.10041
pMaxTotalCurrentOff
Gets, sets or defaults the total maximum current off level of a power module. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-16000
 .1.3.6.1.4.1.34097.9.80.1.1.10042
pMaxTotalCurrentWarning
Gets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)
AUnsigned32r/w
Constraints:
range: 100-16000
 .1.3.6.1.4.1.34097.9.80.1.1.10043
pMaxTotalPowerOff
Gets, sets or defaults the maximum total power off level. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-4000
 .1.3.6.1.4.1.34097.9.80.1.1.10044
pMaxTotalPowerWarning
Gets, sets or defaults the maximum total power warning level. (unit: W)
WUnsigned32r/w
Constraints:
range: 20-4000
 .1.3.6.1.4.1.34097.9.80.1.1.10045
pMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.80.1.1.10047
pMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.80.1.1.10049
pMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.80.1.1.10052
pMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.80.1.1.10053
pPortStateEvent
Enables or disables the SNMP trap if the state of an outlet is changed.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10076
pCurrentOffEvent
Enables or disables the SNMP trap if the outlet current off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10077
pCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10078
pPowerOffEvent
Enables or disables the SNMP trap if the power off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10079
pPowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10080
pTotalCurrentOffEvent
Enables or disables the SNMP trap if the total outlet current off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10081
pTotalCurrentWarningEvent
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10082
pTotalPowerOffEvent
Enables or disables the SNMP trap if the total power off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10083
pTotalPowerWarningEvent
Enables or disables the SNMP trap if the total power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10084
pVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10086
pTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10087
pMaxOverheatingOff
Gets, sets or defaults the maximum overheat temperature off level. (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.80.1.1.10090
pOverheatingOffEvent
Enables or disables the SNMP trap if the overtemperature off level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10091
pPowerCycleTime
Gets, sets or defaults the time interval that is used to do a power cycle of an outlet. (unit: s)
sUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.80.1.1.10099
pExternalSensorLabel
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.80.1.1.10109
pMaxOverheatingWarning
Gets, sets or defaults the overheating temperature warning level. (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.80.1.1.10121
pOverheatingWarningEvent
Enables or disables the SNMP trap if the overheat warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10122
pMicroIntTimeThreshold
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
msUnsigned32r/w
Constraints:
range: 10-65535
 .1.3.6.1.4.1.34097.9.80.1.1.10135
pMicroIntEvent
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10136
pSoftFuseCurrentThreshold
The threshold of the soft fuse is a factor of the maximum nominal current off (unit: A)
AUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.80.1.1.10137
pSoftFuseDelay
The minimum time the current of an outlet must be above the soft fuse current threshold to switch it off. (unit: ms)
msUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.80.1.1.10138
pSoftFuseEvent
Enables or disables the SNMP trap if a soft fuse is triggered.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10139
pPhaseShiftEvent
Enables or disables the SNMP trap if a phase shift on the voltage is detected.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10140
pSchedulePortOnTime
Gets, sets or defaults the time for the scheduler to turn on an outlet. (unit: min)
minUnsigned32r/w
Constraints:
range: 0-1439
 .1.3.6.1.4.1.34097.9.80.1.1.10146
pSchedulePortOffTime
Gets, sets or defaults the time for the scheduler to turn off an outlet. (unit: min)
minUnsigned32r/w
Constraints:
range: 0-1439
 .1.3.6.1.4.1.34097.9.80.1.1.10147
pEnableSchedulePort
Enables or disables the scheduler on an outlet. When enabled the scheduling is repeated daily.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.80.1.1.10148
pBlockSetPortOff
Prevent outlets to be set off (only delay on and powercycle are still possible).
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.80.1.1.10161
pSchedulePortChangeEvent
event if a port has changed state because of the scheduler
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10166
pAgentIP
IP address of the agent associated to this outlet
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.80.1.1.10172
pAgentPort
Network port on which the associated agent will listen
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.80.1.1.10173
pAgentCommunicationEventFlags
Event flags for events related to agent communication
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.80.1.1.10174
pAlwaysOn
Outlets marked as Always On can only be power cycled by the user
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.80.1.1.10175
pGenericTransducerParameters
sets the slope of the transducer transfer function when the generic transducer type is selected (unit: mA/V)
mA/VInteger32r/w
Constraints:
range: 2000-2000000000
 .1.3.6.1.4.1.34097.9.80.1.1.10190
pMaxBigCurrentWarning
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)
AUnsigned32r/w
Constraints:
range: 100-400000000
 .1.3.6.1.4.1.34097.9.80.1.1.10193
pMaxBigPowerWarning
Gets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)
WUnsigned32r/w
Constraints:
range: 2000-2000000000
 .1.3.6.1.4.1.34097.9.80.1.1.10194
pGroupNumber
Group number per port to group ports
Unsigned32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.34097.9.80.1.1.10195
pPhaseLink
Link the current port with a voltage phase
Unsigned32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.34097.9.80.1.1.10196
pCurrentSensorSelector
Selection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.80.1.1.10197
pMinBigCurrentWarning
Gets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)
AUnsigned32r/w
Constraints:
range: 0-400000000
 .1.3.6.1.4.1.34097.9.80.1.1.10209
powerIndex
Index for the selected Power Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.80.1.1.65537
powerModuleIndex
Selected Power Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.80.1.1.65538

eMeasuring3PhaseTable

table
.1.3.6.1.4.1.34097.9.81.1 · 1 row entry · 43 columns
Open in standard view 
NO_INFO
eMeasuring3PhaseEntry entry .1.3.6.1.4.1.34097.9.81.1.1
NO_INFO
Indexes
measuring3phaseModuleIndex measuring3phaseIndex
Column Syntax OID
qGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.1
qSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.2
qCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.3
qVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUhundredth
Textual Convention: Uhundredth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.4
qFrequency
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
HzUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.5
qActiveEnergy
Gets the energy used by an outlet. (unit: 0.001kWh)
kWhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.9
qApparentEnergy
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
kVAhUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.10
qTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUtenth
Textual Convention: Utenth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.11
qPowerFactor
Gets the power factor of an outlet. (unit: %)
%SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.16
qTimeOnline
Gets the amount of seconds since the last reset. (unit: s)
sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.24
qIOPort
Gets the state of a digital input.
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.81.1.1.30
qTotalHarmonicDistortion
total harmonic distortion - outlet (unit: 0.1%)
%Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.81.1.1.50
qPhase
the phase between 2 waves (unit: degr)
degrUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.81.1.1.51
qBigCurrent
Gets the current of an outlet. (unit: 0.0001A)
ASNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.81.1.1.52
qBigPower
Gets the power of an outlet. (unit: 0.001W)
WUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.53
qBigApparentPower
Gets the apparent power of an outlet. (unit: 0.001VA)
VAUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.81.1.1.54
qStatus
status of a module
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.81.1.1.1000
qModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.81.1.1.10001
qFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.81.1.1.10002
qHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.81.1.1.10003
qFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.81.1.1.10004
qHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.81.1.1.10005
qPortState
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.81.1.1.10035
qMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.81.1.1.10047
qMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
VUnsigned32r/w
Constraints:
range: 5000-30000
 .1.3.6.1.4.1.34097.9.81.1.1.10049
qMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.81.1.1.10052
qMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
KUnsigned32r/w
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.81.1.1.10053
qPortStateEvent
Enables or disables the SNMP trap if the state of an outlet is changed.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10076
qCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10078
qPowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10080
qVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10086
qTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10087
qMicroIntTimeThreshold
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
msUnsigned32r/w
Constraints:
range: 10-65535
 .1.3.6.1.4.1.34097.9.81.1.1.10135
qMicroIntEvent
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
EVENTFLAGSr/w
Textual Convention: EVENTFLAGS Enumeration
Type Values:
0sNMPTrapOff
1sNMPTrapOn
 .1.3.6.1.4.1.34097.9.81.1.1.10136
qDeviceID
The ID of the device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.81.1.1.10150
qDeviceVersion
The version of the device.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.81.1.1.10151
qMaxBigCurrentWarning
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)
AUnsigned32r/w
Constraints:
range: 100-400000000
 .1.3.6.1.4.1.34097.9.81.1.1.10193
qMaxBigPowerWarning
Gets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)
WUnsigned32r/w
Constraints:
range: 2000-2000000000
 .1.3.6.1.4.1.34097.9.81.1.1.10194
qCurrentSensorSelector
Selection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.34097.9.81.1.1.10197
qMinBigCurrentWarning
Gets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)
AUnsigned32r/w
Constraints:
range: 0-400000000
 .1.3.6.1.4.1.34097.9.81.1.1.10209
qkWhMode
Set the mode when to count kWh, 0 = always, 1 = only positive, 2= only negative
Unsigned32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.34097.9.81.1.1.10234
measuring3phaseIndex
Index for the selected Measuring3Phase Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.81.1.1.65537
measuring3phaseModuleIndex
Selected Measuring3Phase Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.81.1.1.65538

ePCTable

table
.1.3.6.1.4.1.34097.9.85.1 · 1 row entry · 16 columns
Open in standard view 
NO_INFO
ePCEntry entry .1.3.6.1.4.1.34097.9.85.1.1
NO_INFO
Indexes
pcModuleIndex pcIndex
Column Syntax OID
uGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.85.1.1.1
uSpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.85.1.1.2
uCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.85.1.1.3
uVoltage
Gets the voltage of a power module. (unit: 0.01V)
VUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.85.1.1.4
uCurrent
Gets the current of an outlet. (unit: 0.001A)
AUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.34097.9.85.1.1.6
uStatePortCur
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
CURPORTSTATE
Textual Convention: CURPORTSTATE Enumeration
Type Values:
0portOff
1portOnNoWarning
2portOff1
3portOnWithWarningCurrent
4portOff2
5portOnWithWarningPower
6portOff3
7portOnWithWarningCurrentAndPower
8portOffWithError
9portOnNoWarning1
10portOffWithError1
11portOnWithWarningCurrent1
12portOffWithError2
13portOnWithWarningPower1
14portOffWithError3
15portOnWithWarnCurrentAndPower1
16portOffWithDelayOn
17portOnNoWarning2
18portOffWithDelayOn1
19portOnWithWarningCurrent2
20portOffWithDelayOn2
21portOnWithWarningPower2
22portOffWithDelayOn3
23portOnWithWarnCurrentAndPower2
 .1.3.6.1.4.1.34097.9.85.1.1.8
uTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
KUnsigned32
Constraints:
range: 2232-4732
 .1.3.6.1.4.1.34097.9.85.1.1.11
uHumidity
Gets the relative humidity. (unit: 0.1RH)
RHUnsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.34097.9.85.1.1.12
uModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.85.1.1.10001
uFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.85.1.1.10002
uHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.85.1.1.10003
uFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.85.1.1.10004
uHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.85.1.1.10005
uPortState
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.34097.9.85.1.1.10035
pcIndex
Index for the selected PC Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.85.1.1.65537
pcModuleIndex
Selected PC Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.85.1.1.65538

eTestModuleTable

table
.1.3.6.1.4.1.34097.9.89.1 · 1 row entry · 13 columns
Open in standard view 
Module to test the R-bus
eTestModuleEntry entry .1.3.6.1.4.1.34097.9.89.1.1
Module to test the R-bus
Indexes
testmoduleModuleIndex testmoduleIndex
Column Syntax OID
yGeneralModuleStatus
General status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.89.1.1.1
ySpecificModuleStatus
Specific status of a module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.89.1.1.2
yCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
UNIXSNMPv2-SMITimeTicksr/w
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.89.1.1.3
yCurrent
Gets the current of an outlet. (unit: 0.001A)
AUthousandth
Textual Convention: Uthousandth Unsigned32
 .1.3.6.1.4.1.34097.9.89.1.1.6
yStatePortCur
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
CURPORTSTATE
Textual Convention: CURPORTSTATE Enumeration
Type Values:
0portOff
1portOnNoWarning
2portOff1
3portOnWithWarningCurrent
4portOff2
5portOnWithWarningPower
6portOff3
7portOnWithWarningCurrentAndPower
8portOffWithError
9portOnNoWarning1
10portOffWithError1
11portOnWithWarningCurrent1
12portOffWithError2
13portOnWithWarningPower1
14portOffWithError3
15portOnWithWarnCurrentAndPower1
16portOffWithDelayOn
17portOnNoWarning2
18portOffWithDelayOn1
19portOnWithWarningCurrent2
20portOffWithDelayOn2
21portOnWithWarningPower2
22portOffWithDelayOn3
23portOnWithWarnCurrentAndPower2
 .1.3.6.1.4.1.34097.9.89.1.1.8
yAnalogueInput
Gets the value of an analog input (voltage). (unit: mV)
mVSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.34097.9.89.1.1.27
yModuleName
Gets, sets or defaults the module name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.89.1.1.10001
yFirmwareVersion
Gets the version of the module's firmware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.89.1.1.10002
yHardwareVersion
Gets the version of a module's hardware.
Version
Textual Convention: Version OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.34097.9.89.1.1.10003
yFirmwareID
Gets the ID of the module's firmware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.89.1.1.10004
yHardwareID
Gets the ID of a module's hardware.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.34097.9.89.1.1.10005
testmoduleIndex
Index for the selected TestModule Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.89.1.1.65537
testmoduleModuleIndex
Selected TestModule Module
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.34097.9.89.1.1.65538