aWaterleakWarning
ES-RACKTIVITY-MIB ·
.1.3.6.1.4.1.34097.9.65.1.1.10113
Object
column
r/w
Unsigned32
Gets, sets or defaults the water leak detection state (0 = disabled, other values = enabled).
Context
- MIB
- ES-RACKTIVITY-MIB
- OID
.1.3.6.1.4.1.34097.9.65.1.1.10113- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eESNEntry
- Table
- eESNTable
- Siblings
- 64
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aGeneralModuleStatus General status of a module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.1 |
| aModuleName Gets, sets or defaults the module name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10001 |
| aFirmwareVersion Gets the version of the module's firmware. | column | Version | .1.3.6.1.4.1.34097.9.65.1.1.10002 |
| aHardwareVersion Gets the version of a module's hardware. | column | Version | .1.3.6.1.4.1.34097.9.65.1.1.10003 |
| aFirmwareID Gets the ID of the module's firmware. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10004 |
| aHardwareID Gets the ID of a module's hardware. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10005 |
| aDisplayTimeOn Gets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min) | column | min Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10032 |
| aMaxVoltageWarning Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V) | column | V Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10047 |
| aMinVoltageWarning Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V) | column | V Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10049 |
| aMinTemperatureWarning Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K) | column | K Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10052 |
| aMaxTemperatureWarning Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K) | column | K Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10053 |
| aMinHumidityWarning Gets, sets or defaults the minimum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH) | column | RH Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10054 |
| aMaxHumidityWarning Gets, sets or defaults the maximum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH) | column | RH Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10055 |
| aCurrentWarningEvent Enables or disables the SNMP trap if the outlet current warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10078 |
| aPowerWarningEvent Enables or disables the SNMP trap if the power warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10080 |
| aVoltageWarningEvent Enables or disables the SNMP trap if the voltage warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10086 |
| aTemperatureWarningEvent Enables or disables the SNMP trap if the temperature warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10087 |
| aHumidityWarningEvent Enables or disables the SNMP trap if the humidity warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10088 |
| aDewPointWarning Gets, sets or defaults the dewpoint warning level. If the temperature difference between the current temperature and the dewpoint temperature drops below this value, an event is g… | column | K Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10092 |
| aDewPointWarningEvent Enables or disables the SNMP trap if the dewpoint warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10093 |
| aDewPointViolationEvent Enables or disables the SNMP trap if the dewpoint temperature is reached. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10094 |
| aPressureWarningEvent Enables or disables the SNMP trap if the atmospheric pressure warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10095 |
| aMinPressureWarning Gets, sets or defaults the minimum atmospheric pressure warning level. (unit: 0.1hPa) | column | hPa Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10096 |
| aMaxPressureWarning Gets, sets or defaults the maximum atmospheric pressure warning level. (unit: 0.1hPa) | column | hPa Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10097 |
| aDisplayBrightness Gets, sets or defaults the display brightness (if supported). | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10098 |
| aMotionSensitivity Gets, sets or defaults the sensitivity of a motion sensor. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10107 |
| aExternalSensorLabel Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10109 |
| aRelayLabel Gets, sets or defaults an Energy Sensor relay label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10110 |
| aMinAnalogueInputWarning Gets, sets or defaults the lower warning level for an analog input. A warning is generated if this level is exceeded. (unit: mV) | column | mV Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10111 |
| aMaxAnalogueInputWarning Gets, sets or defaults the upper warning level for an analog input. A warning is generated if this level is exceeded. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10112 |
| aMinAirflowWarning Gets, sets or defaults the minimum warning level for an airflow sensor. A warning is generated if this level is exceeded. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10114 |
| aMaxAirflowWarning Gets, sets or defaults the maximum warning level for an airflow sensor. A warning is generated if this level is exceeded. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10115 |
| aAnalogueInputWarningEvent Enables or disables the SNMP trap if the analog input warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10116 |
| aWaterleakWarningEvent Enables or disables the SNMP trap if a water leak is detected. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10117 |
| aAirflowWarningEvent Enables or disables the SNMP trap if the airflow warning level is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10118 |
| aRelayAssertActionEvent Enables or disables the SNMP trap if an Energy Sensor relay is asserted. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10119 |
| aRelayDeassertActionEvent Enables or disables the SNMP trap if an Energy Sensor relay is deasserted. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10120 |
| aMotionWarning Gets, sets or defaults the motion warning threshold. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.10141 |
| aMotionWarningEvent Enables or disables the SNMP trap if the motion warning threshold is exceeded. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10149 |
| aDeviceID The ID of the device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10150 |
| aDeviceVersion The version of the device. | column | Version | .1.3.6.1.4.1.34097.9.65.1.1.10151 |
| aSysName The full name of the device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.34097.9.65.1.1.10152 |
| aMaxHighCurrentWarning Gets sets or defaults the maximum high current warning level. (unit: 0.1A) | column | A Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.10165 |
| aMinHighCurrentWarning Gets sets or defaults the minimum high current warning level. (unit: 0.1A) | column | A Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.10176 |
| aMinHighPowerWarning Gets sets or defaults the power min high current warning level. (unit: 0.01kW) | column | kW Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.10177 |
| aMaxHighPowerWarning Gets sets or defaults the power max high current warning level. (unit: 0.01kW) | column | kW Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.10178 |
| aIOPortWarningEvent Enables or disables the SNMP trap if the IO Port change state. | column | EVENTFLAGS | .1.3.6.1.4.1.34097.9.65.1.1.10192 |
| aTemperature Gets the current temperature of a temperature sensor. (unit: 0.1K) | column | K Utenth | .1.3.6.1.4.1.34097.9.65.1.1.11 |
| aHumidity Gets the relative humidity. (unit: 0.1RH) | column | RH Utenth | .1.3.6.1.4.1.34097.9.65.1.1.12 |
| aSpecificModuleStatus Specific status of a module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.2 |
| aAirflow Gets the current airflow level. (unit: 0.1m/s) | column | m/s Utenth | .1.3.6.1.4.1.34097.9.65.1.1.23 |
| aDewPoint Gets the current dewpoint. Taking the current humidity into consideration, condensation will occur if the temperature drops below this level. (unit: 0.1K) | column | K Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.25 |
| aPressure Gets the atmospheric pressure. (unit: 0.1hPa) | column | hPa Utenth | .1.3.6.1.4.1.34097.9.65.1.1.26 |
| aAnalogueInput Gets the value of an analog input (voltage). (unit: mV) | column | mV SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.27 |
| aWaterleak Gets the current state of the water leak sensor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.28 |
| aMotionDetected Gets or resets whether motion has been detected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.29 |
| aCurrentTime Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX) | column | UNIX SNMPv2-SMITimeTicks | .1.3.6.1.4.1.34097.9.65.1.1.3 |
| aIOPort Gets the state of a digital input. | column | Unsigned32 | .1.3.6.1.4.1.34097.9.65.1.1.30 |
| aVoltage Gets the voltage of a power module. (unit: 0.01V) | column | V Uhundredth | .1.3.6.1.4.1.34097.9.65.1.1.4 |
| aHighCurrent The current for high values (unit: 0.1A) | column | A Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.41 |
| aHighPower The power for high values (unit: 0.01kW) | column | kW Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.43 |
| esnIndex Index for the selected ESN Module | column | Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.65537 |
| esnModuleIndex Selected ESN Module | column | Integer32 | .1.3.6.1.4.1.34097.9.65.1.1.65538 |
| aStatePortCur Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead. | column | CURPORTSTATE | .1.3.6.1.4.1.34097.9.65.1.1.8 |