eMaxTotalPowerWarning

ES-RACKTIVITY-MIB · .1.3.6.1.4.1.34097.9.69.1.1.10045
MIB view Table view

Object

column r/w W Unsigned32 
Gets, sets or defaults the maximum total power warning level. (unit: W)

Context

MIB
ES-RACKTIVITY-MIB
OID
.1.3.6.1.4.1.34097.9.69.1.1.10045
Type
column
Access
readwrite
Status
current
Units
W
Parent
eEnergyMonitorEntry
Table
eEnergyMonitorTable
Siblings
42

Syntax

W Unsigned32

Values & Constraints

Object Constraints
range: 20-4000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
eGeneralModuleStatus
General status of a module.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.1
eApparentEnergy
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
columnkVAh Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.10
eModuleName
Gets, sets or defaults the module name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.34097.9.69.1.1.10001
eFirmwareVersion
Gets the version of the module's firmware.
columnVersion.1.3.6.1.4.1.34097.9.69.1.1.10002
eHardwareVersion
Gets the version of a module's hardware.
columnVersion.1.3.6.1.4.1.34097.9.69.1.1.10003
eFirmwareID
Gets the ID of the module's firmware.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.34097.9.69.1.1.10004
eHardwareID
Gets the ID of a module's hardware.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.34097.9.69.1.1.10005
eMaxCurrentWarning
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)
columnA Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10039
eMaxPowerWarning
Gets, sets or defaults the maximum power warning level of an outlet. (unit: W)
columnW Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10041
eMaxTotalCurrentWarning
Gets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)
columnA Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10043
eMaxVoltageWarning
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
columnV Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10047
eMinVoltageWarning
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
columnV Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10049
eMinTemperatureWarning
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
columnK Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10052
eMaxTemperatureWarning
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
columnK Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10053
eCurrentWarningEvent
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10078
ePowerWarningEvent
Enables or disables the SNMP trap if the power warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10080
eTotalCurrentWarningEvent
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10082
eTotalPowerWarningEvent
Enables or disables the SNMP trap if the total power warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10084
eVoltageWarningEvent
Enables or disables the SNMP trap if the voltage warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10086
eTemperatureWarningEvent
Enables or disables the SNMP trap if the temperature warning level is exceeded.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10087
eMicroIntTimeThreshold
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
columnms Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.10135
eMicroIntEvent
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
columnEVENTFLAGS.1.3.6.1.4.1.34097.9.69.1.1.10136
eTemperature
Gets the current temperature of a temperature sensor. (unit: 0.1K)
columnK Utenth.1.3.6.1.4.1.34097.9.69.1.1.11
eApparentPower
Gets the apparent power of an outlet. (unit: VA)
columnVA SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.15
ePowerFactor
Gets the power factor of an outlet. (unit: %)
column% SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.16
eTotalCurrent
Gets the total current of a power module. (unit: 0.001A)
columnA Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.17
eTotalRealPower
Gets the total power level of a power module. (unit: W)
columnW SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.18
eTotalApparentPower
Gets the total apparent power of a power module. (unit: VA)
columnVA SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.19
eSpecificModuleStatus
Specific status of a module.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.2
eTotalActiveEnergy
Gets the total energy of a power module. (unit: 0.001kWh)
columnkWh Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.20
eTotalApparentEnergy
Gets the total apparent energy of a power module. (unit: 0.001kVAh)
columnkVAh Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.21
eTotalPowerFactor
Gets the total power factor of a power module. (unit: %)
column% SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.22
eTimeOnline
Gets the amount of seconds since the last reset. (unit: s)
columns SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.24
eCurrentTime
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
columnUNIX SNMPv2-SMITimeTicks.1.3.6.1.4.1.34097.9.69.1.1.3
eVoltage
Gets the voltage of a power module. (unit: 0.01V)
columnV Uhundredth.1.3.6.1.4.1.34097.9.69.1.1.4
eFrequency
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
columnHz Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.5
eTotalHarmonicDistortion
total harmonic distortion - outlet (unit: 0.1%)
column% Unsigned32.1.3.6.1.4.1.34097.9.69.1.1.50
eCurrent
Gets the current of an outlet. (unit: 0.001A)
columnA Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.6
energymonitorIndex
Index for the selected EnergyMonitor Module
columnInteger32.1.3.6.1.4.1.34097.9.69.1.1.65537
energymonitorModuleIndex
Selected EnergyMonitor Module
columnInteger32.1.3.6.1.4.1.34097.9.69.1.1.65538
ePower
Gets the power of an outlet. (unit: W)
columnW SNMPv2-SMIUnsigned32.1.3.6.1.4.1.34097.9.69.1.1.7
eActiveEnergy
Gets the energy used by an outlet. (unit: 0.001kWh)
columnkWh Uthousandth.1.3.6.1.4.1.34097.9.69.1.1.9