CISCO-OPTICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

135

coiOpticalControllerTable

table

.1.3.6.1.4.1.9.9.828.1.1.2 · 1 row entry · 15 columns

Open in standard view

This table provides management information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195).

coiOpticalControllerEntry entry .1.3.6.1.4.1.9.9.828.1.1.2.1

An entry containing management information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when a
new interface is added to the ifTable.

Indexes

IF-MIBifIndex

Column Syntax OID

coiOpticalControllerWavelength

This object is used to configure the wavelength on
optical channel interfaces in 1/100 nm.

1/100 nmCoiOpticalWavelengthr/w

Textual Convention: CoiOpticalWavelength Unsigned32

Type Constraints:
range: 0
range: 1528770..1604030

.1.3.6.1.4.1.9.9.828.1.1.2.1.1

coiOpticalControllerLaserStatus

This object gives the current operational state of the Laser.
Valid values are -
'up' - The laser is operational.
'down' - The laser is not operational.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.9.9.828.1.1.2.1.2

coiOpticalControllerFrequency

This object is used to configure the frequency on optical
channel interfaces in 100 MHz.

100 MHzSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.828.1.1.2.1.3

coiOpticalControllerChannelNumber

This object is used to configure the channel number on
optical channel interfaces. Channel Number is set to 0 if not
50GHz grid.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.828.1.1.2.1.4

coiOpticalControllerTransmitPower

This object is used to configure the Transmit Power in
1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.5

coiOpticalControllerOpticsType

This object gives the description of optics present on optical
channel interfaces.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.828.1.1.2.1.6

coiOpticalControllerRXLowThreshold

This object is used to configure the Receive Low Threshold in
1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.7

coiOpticalControllerTXLowThreshold

This object is used to configure the Transmit Low Threshold in
1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.8

coiOpticalControllerRXHighThreshold

This object is used to configure the Receive High Threshold in
1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.9

coiOpticalControllerTXHighThreshold

This object is used to configure the Transmit High Threshold
in 1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.10

coiOpticalControllerLBCHighThreshold

This object is used to configure the Laser Bias Current High
Threshold in 1/10% on optical channel interfaces.

1/10 %Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.1.2.1.11

coiOpticalControllerStatus

This object indicates the current defect status of the Optics
layer.
noDefect(0): No Defect. This bit is set high when no
defect is detected on the optics.
improprmvl(1): Improper Removal. T…

Bits

Enumerated Values:

0	noDefect
1	improprmvl
2	mea
3	provMismatch
4	highRXPwr
5	highTXPwr
6	lowRXPwr
7	lowTXPwr
8	highLBC
9	highDGD
10	outOfRangeCD
11	lowOSNR
12	wvlOutOfLock
13	highLaserTemp
14	lowLaserTemp
15	ppmFail

.1.3.6.1.4.1.9.9.828.1.1.2.1.12

coiOpticalControllerPortType

This object gives the port type of the optical interface.

CoiPortType

Textual Convention: CoiPortType Enumeration

Type Values:

1	clientPort
2	trunkPort

.1.3.6.1.4.1.9.9.828.1.1.2.1.13

coiOpticalControllerTotalRXPower

This object is used to configure the total receive power in
1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.14

coiOpticalControllerTotalTXPower

This object is used to configure the total transmit power
in 1/100 dBm on optical channel interfaces.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.1.2.1.15

coiOpticalControllerPerLaneTable

table

.1.3.6.1.4.1.9.9.828.1.1.3 · 1 row entry · 11 columns

Open in standard view

This table provides the management information for optical
layer related attributes of interfaces with an ifType of
opticalChannel(195) and lane number as
coiOpticalControllerLane.

coiOpticalControllerPerLaneEntry entry .1.3.6.1.4.1.9.9.828.1.1.3.1

An entry containing management information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195) and lane number as
coiOpticalControllerLane. Entries are created by the feature
when a new …

Indexes

IF-MIBifIndex coiOpticalControllerLane

Column	Syntax	OID
coiOpticalControllerLane This object specifies the lane number for the optical controller. Each optical controller is divided into data lanes, with each lane operating at some data rate, giving an aggregated bandwidth of the controller, as a wh…	Integer32 Constraints: `range: 1-12`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.1`
coiOpticalControllerPerLaneRXPower This object specifies the Receive power in 1/100 dBm.	1/100 dBmCoiOpticalPower Textual Convention: CoiOpticalPower `Integer32` Type Constraints: `range: -4000..3000`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.2`
coiOpticalControllerPerLaneTXPower This object specifies the Transmit power in 1/100 dBm.	1/100 dBmCoiOpticalPower Textual Convention: CoiOpticalPower `Integer32` Type Constraints: `range: -4000..3000`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.3`
coiOpticalControllerPerLaneLBC This object specifies the Laser Bias Current in 1/10%.	1/10 %Integer32 Constraints: `range: 0-1000`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.4`
coiOpticalControllerPerLaneOSNR This object specifies the Optical Signal to Noise Ratio in 1/100 dB.	1/100 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.5`
coiOpticalControllerPerLaneChromaticDispersion This object specifies the measure of spread of light pulse in ps/nm.	ps/nmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.6`
coiOpticalControllerPerLaneDifferentialGroupDelay This object specifies the propagation time difference between eigenmodes X and Y in 1/100 ps.	1/100 psSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.7`
coiOpticalControllerPerLaneSecondOrderPMD This object specifies the threshold Second Order Polarization Mode Dispersion in 1/100 ps^2.	1/100 ps^2SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.8`
coiOpticalControllerPerLanePolarizationDependentLoss This object specifies the threshold Polarization Dependent Loss in 1/100 dB.	1/100 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.9`
coiOpticalControllerPerLanePolarizationChangeRate This object specifies the Polarization Change Rate in 1/100 rad/s.	1/100 rad/sSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.10`
coiOpticalControllerPerLanePhaseNoise This object specifies the Fluctuations in the Phase of a Waveform in 1/1000 dB.	1/1000 dBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.828.1.1.3.1.11`

coiOpticalThresholdTable

table

.1.3.6.1.4.1.9.9.828.1.2.1 · 1 row entry · 41 columns

Open in standard view

This table provides threshold information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195) and Interval type as
coiOptThreshIntervalType.

coiOpticalThresholdEntry entry .1.3.6.1.4.1.9.9.828.1.2.1.1

An entry containing threshold information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature
when a new interface is added to the ifTable.

Indexes

IF-MIBifIndex coiOptThreshIntervalType

Column Syntax OID

coiOptThreshIntervalType

This object gives the interval type during which the
performance statistics are accumulated for the interface.

CoiIntervalType

Textual Convention: CoiIntervalType Enumeration

Type Values:

1	fifteenMin
2	oneDay
3	thirtySecond

.1.3.6.1.4.1.9.9.828.1.2.1.1.1

coiOptThreshTXPowerMin

This object is used to configure the threshold of minimum
Transmit power for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.1.1.2

coiOptThreshRXPowerMin

This object is used to configure the threshold of minimum
Receive power for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.1.1.3

coiOptThreshOSNRMin

This object is used to configure the threshold of minimum
Optical Signal to Noise Ratio for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.4

coiOptThreshChromaticDispersionMin

This object is used to configure the threshold of minimum
measure of spread of light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.5

coiOptThreshDifferentialGroupDelayMin

This object is used to configure the threshold of minimum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps.

1/100 psSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.6

coiOptThreshSecondOrderPMDMin

This object is used to configure the threshold of minimum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2.

1/100 ps^2SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.7

coiOptThreshPolarizationDependentLossMin

This object is used to configure the threshold of minimum
Polarization Dependent Loss for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.8

coiOptThreshPolarizationChangeRateMin

This object is used to configure the threshold of minimum
Polarization Change Rate for the interface in 1/100 rad/s.

1/100 rad/sSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.9

coiOptThreshPhaseNoiseMin

This object is used to configure the threshold of minimum
Fluctuations in the Phase of a Waveform for the interface in
1/1000 dB.

1/1000 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.10

coiOptThreshLBCMin

This object is used to configure the threshold of minumum
Laser Bias Current in 1/10%.

1/10 %Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.2.1.1.11

coiOptThreshTXPowerMax

This object is used to configure the threshold of maximum
Transmit power for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.1.1.12

coiOptThreshRXPowerMax

This object is used to configure the threshold of maximum
Receive power for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPowerr/w

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.1.1.13

coiOptThreshOSNRMax

This object is used to configure the threshold of maximum
Optical Signal to Noise Ratio for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.14

coiOptThreshChromaticDispersionMax

This object is used to configure the threshold of maximum
measure of spread of light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.15

coiOptThreshDifferentialGroupDelayMax

This object is used to configure the threshold of maximum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps.

1/100 psSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.16

coiOptThreshSecondOrderPMDMax

This object is used to configure the threshold of maximum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2.

1/100 ps^2SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.17

coiOptThreshPolarizationDependentLossMax

This object is used to configure the threshold of maximum
Polarization Dependent Loss for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.18

coiOptThreshPolarizationChangeRateMax

This object is used to configure the threshold of maximum
Polarization Change Rate in 1/100 rad/s for the interface.

1/100 rad/sSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.19

coiOptThreshPhaseNoiseMax

This object is used to configure the threshold of maximum
Fluctuations in the Phase of a Waveform in 1/1000 dB for the
interface.

1/1000 dBSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.1.1.20

coiOptThreshLBCMax

This object is used to configure the threshold of maximum
Laser Bias Current in 1/10 % for the interface.

1/10 %Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.2.1.1.21

coiOptThreshTXPowerEnableMin

This object is used to configure the enablement of threshold
min Transmit power for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.22

coiOptThreshRXPowerEnableMin

This object is used to configure the enablement of the
threshold min Receive power for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.23

coiOptThreshOSNREnableMin

This object is used to configure the enablement of the
threshold min Optical Signal to Noise Ratio for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.24

coiOptThreshChromaticDispersionEnableMin

This object is used to configure the enablement of the
threshold min measure of spread of light pulse for the
interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.25

coiOptThreshDifferentialGroupDelayEnableMin

This object is used to configure the enablement of the
threshold min propagation time difference between eigenmodes X
and Y for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.26

coiOptThreshSecondOrderPMDEnableMin

This object is used to configure the enablement of the
threshold min Second Order Polarization Mode Dispersion for
the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.27

coiOptThreshPolarizationDependentLossEnableMin

This object is used to configure the enablement of the
threshold min Polarization Dependent Loss for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.28

coiOptThreshPolarizationChangeRateEnableMin

This object is used to configure the enablement of the
threshold min Polarization Change Rate for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.29

coiOptThreshPhaseNoiseEnableMin

This object is used to configure the enablement of the
threshold min Fluctuations in the Phase of a Waveform for the
interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.30

coiOptThreshLBCEnableMin

This object is used to configure the enablement of the
threshold min Laser Bias Current for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.31

coiOptThreshTXPowerEnableMax

This object is used to configure the enablement of the
threshold max Transmit power for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.32

coiOptThreshRXPowerEnableMax

This object is used to configure the enablement of the
threshold max Receive power for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.33

coiOptThreshOSNREnableMax

This object is used to configure the enablement of the
threshold max Optical Signal to Noise Ratio for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.34

coiOptThreshChromaticDispersionEnableMax

This object is used to configure the enablement of the
threshold max measure of spread of light pulse for the
interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.35

coiOptThreshDifferentialGroupDelayEnableMax

This object is used to configure the enablement of the
threshold max propagation time difference between eigenmodes
X and Y for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.36

coiOptThreshSecondOrderPMDEnableMax

This object is used to configure the enablement of the
threshold max Second Order Polarization Mode Dispersion for the
interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.37

coiOptThreshPolarizationDependentLossEnableMax

This object is used to configure the enablement of the
threshold max Polarization Dependent Loss for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.38

coiOptThreshPolarizationChangeRateEnableMax

This object is used to configure the enablement of the
threshold max Polarization Change Rate for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.39

coiOptThreshPhaseNoiseEnableMax

This object is used to configure the enablement of the
threshold max Fluctuations in the Phase of a Waveform for the
interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.40

coiOptThreshLBCEnableMax

This object is used to configure the enablement of the
threshold max Laser Bias Current for the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.828.1.2.1.1.41

coiOpticalCurrentTable

table

.1.3.6.1.4.1.9.9.828.1.2.2 · 1 row entry · 33 columns

Open in standard view

This table provides current information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195), Lane as coiOptCurrentLane and Interval
as coiOptCurrentIntervalType.

coiOpticalCurrentEntry entry .1.3.6.1.4.1.9.9.828.1.2.2.1

An entry containing current information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when
a new interface is added to the ifTable.

Indexes

IF-MIBifIndex coiOptCurrentLane coiOptCurrentIntervalType

Column Syntax OID

coiOptCurrentLane

This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an
aggregated bandwidth of the controller as a whole…

Integer32

Constraints:
range: 1-12

.1.3.6.1.4.1.9.9.828.1.2.2.1.1

coiOptCurrentIntervalType

This object gives the interval type during which the
current performance statistics are accumulated.

CoiIntervalType

Textual Convention: CoiIntervalType Enumeration

Type Values:

1	fifteenMin
2	oneDay
3	thirtySecond

.1.3.6.1.4.1.9.9.828.1.2.2.1.2

coiOptCurrentTXPowerMax

This object specifies the current max Transmit power
for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.3

coiOptCurrentRXPowerMax

This object specifies the current max Receive power for the
interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.4

coiOptCurrentOSNRMax

This object specifies the current max Optical Signal to Noise
Ratio for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.5

coiOptCurrentChromaticDispersionMax

This object specifies the current max measure of spread of
light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.6

coiOptCurrentDifferentialGroupDelayMax

This object specifies the current max propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.7

coiOptCurrentSecondOrderPMDMax

This object specifies the current max Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.8

coiOptCurrentPolarizationDependentLossMax

This object specifies the current max Polarization Dependent
Loss for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.9

coiOptCurrentPolarizationChangeRateMax

This object specifies the current max Polarization Change
Rate for the interface in 1/100 rad/s.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.10

coiOptCurrentPhaseNoiseMax

This object specifies the current max Fluctuations in the
Phase of a Waveform for the interface in 1/1000 dB.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.11

coiOptCurrentLBCMax

This object specifies the current max Laser Bias Current in
1/10% for the interface.

1/10 %Integer32

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.2.2.1.12

coiOptCurrentTXPowerMin

This object specifies the current min Transmit power for the
interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.13

coiOptCurrentRXPowerMin

This object specifies the current min Receive power for the
interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.14

coiOptCurrentOSNRMin

This object specifies the current min Optical Signal to Noise
Ratio for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.15

coiOptCurrentChromaticDispersionMin

This object specifies the current min measure of spread of
light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.16

coiOptCurrentDifferentialGroupDelayMin

This object specifies the current min propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.17

coiOptCurrentSecondOrderPMDMin

This object specifies the current min Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.18

coiOptCurrentPolarizationDependentLossMin

This object specifies the current min Polarization Dependent
Loss for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.19

coiOptCurrentPolarizationChangeRateMin

This object specifies the current min Polarization Change Rate
for the interface in 1/100 rad/s.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.20

coiOptCurrentPhaseNoiseMin

This object specifies the current min Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.21

coiOptCurrentLBCMin

This object specifies the current min Laser Bias Current in
1/10% for the interface.

1/10 %Integer32

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.2.2.1.22

coiOptCurrentTXPowerAvg

This object specifies the current average Transmit power
for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.23

coiOptCurrentRXPowerAvg

This object specifies the current average Receive power
for the interface in 1/100 dBm.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.2.1.24

coiOptCurrentOSNRAvg

This object specifies the current average Optical Signal to
Noise Ratio for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.25

coiOptCurrentChromaticDispersionAvg

This object specifies the current average measure of spread of
light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.26

coiOptCurrentDifferentialGroupDelayAvg

This object specifies the current average propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.27

coiOptCurrentSecondOrderPMDAvg

This object specifies the current average Second Order
Polarization Mode Dispersion for the interface in 1/100 ps^2.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.28

coiOptCurrentPolarizationDependentLossAvg

This object specifies the current average Polarization
Dependent Loss for the interface in 1/100 dB.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.29

coiOptCurrentPolarizationChangeRateAvg

This object specifies the current average Polarization Change
Rate for the interface in 1/100 rad/s.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.30

coiOptCurrentPhaseNoiseAvg

This object specifies the current average Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.2.1.31

coiOptCurrentLBCAvg

This object specifies the current average Laser Bias Current
in 1/10% for the interface.

1/10 %Integer32

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.828.1.2.2.1.32

coiOptCurrentTimestamp

This object specifies the timestamp for
the current bucket for the interface.

OctetString

.1.3.6.1.4.1.9.9.828.1.2.2.1.33

coiOpticalIntervalTable

table

.1.3.6.1.4.1.9.9.828.1.2.3 · 1 row entry · 34 columns

Open in standard view

This table provides interval information for optical layer
related attributes of interfaces with an ifType of
opticalChannel(195), lane as coiOptIntervalLane, Interval as
coiOptIntervalIntervalType and history bucket as
coiOptIntervalIntervalType.

coiOpticalIntervalEntry entry .1.3.6.1.4.1.9.9.828.1.2.3.1

An entry containing interval information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature when a
new interface is added to the ifTable.

Indexes

IF-MIBifIndex coiOptIntervalLane coiOptIntervalIntervalType coiOptIntervalNum

Column Syntax OID

coiOptIntervalLane

This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an aggregated
bandwidth of the controller as a whole…

Integer32

Constraints:
range: 1-12

.1.3.6.1.4.1.9.9.828.1.2.3.1.1

coiOptIntervalIntervalType

This object gives the interval type during which the
performance statistics are accumulated.

CoiIntervalType

Textual Convention: CoiIntervalType Enumeration

Type Values:

1	fifteenMin
2	oneDay
3	thirtySecond

.1.3.6.1.4.1.9.9.828.1.2.3.1.2

coiOptIntervalNum

This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, and the interval identified by N is
the i…

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.9.9.828.1.2.3.1.3

coiOptIntervalTXPowerMax

This object specifies the interval maximum Transmit power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.4

coiOptIntervalRXPowerMax

This object specifies the interval maximum Receive power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.5

coiOptIntervalOSNRMax

This object specifies the interval maximum Optical Signal to
Noise Ratio in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.6

coiOptIntervalChromaticDispersionMax

This object specifies the interval maximum measure of spread
of light pulse for the interface in ps/nm.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.7

coiOptIntervalDifferentialGroupDelayMax

This object specifies the interval maximum propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.8

coiOptIntervalSecondOrderPMDMax

This object specifies the interval maximum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.9

coiOptIntervalPolarizationDependentLossMax

This object specifies the interval maximum Polarization
Dependent Loss in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.10

coiOptIntervalPolarizationChangeRateMax

This object specifies the interval maximum Polarization Change
Rate in 1/100 rad/s for the interface.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.11

coiOptIntervalPhaseNoiseMax

This object specifies the interval maximum Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.12

coiOptIntervalLBCMax

This object specifies the interval maximum Laser Bias Current
in 1/10% for the interface.

1/10 %SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.13

coiOptIntervalTXPowerMin

This object specifies the interval minimum Transmit power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.14

coiOptIntervalRXPowerMin

This object specifies the interval minimum Receive power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.15

coiOptIntervalOSNRMin

This object specifies the interval minimum Optical Signal to
Noise Ratio in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.16

coiOptIntervalChromaticDispersionMin

This object specifies the interval minimum measure of spread
of light pulse in ps/nm for the interface.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.17

coiOptIntervalDifferentialGroupDelayMin

This object specifies the interval minimum propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.18

coiOptIntervalSecondOrderPMDMin

This object specifies the interval minimum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.19

coiOptIntervalPolarizationDependentLossMin

This object specifies the interval minimum Polarization
Dependent Loss in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.20

coiOptIntervalPolarizationChangeRateMin

This object specifies the interval minimum Polarization Change
Rate in 1/100 rad/s for the interface.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.21

coiOptIntervalPhaseNoiseMin

This object specifies the interval minimum Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.22

coiOptIntervalLBCMin

This object specifies the interval minimum Laser Bias Current
in 1/10% for the interface.

1/10 %SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.23

coiOptIntervalTXPowerAvg

This object specifies the interval average Transmit power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.24

coiOptIntervalRXPowerAvg

This object specifies the interval average Receive power in
1/100 dBm for the interface.

1/100 dBmCoiOpticalPower

Textual Convention: CoiOpticalPower Integer32

Type Constraints:
range: -4000..3000

.1.3.6.1.4.1.9.9.828.1.2.3.1.25

coiOptIntervalOSNRAvg

This object specifies the interval average Optical Signal to
Noise Ratio in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.26

coiOptIntervalChromaticDispersionAvg

This object specifies the interval average measure of spread
of light pulse in ps/nm for the interface.

ps/nmSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.27

coiOptIntervalDifferentialGroupDelayAvg

This object specifies the interval average propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface.

1/100 psSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.28

coiOptIntervalSecondOrderPMDAvg

This object specifies the interval average Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface.

1/100 ps^2SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.29

coiOptIntervalPolarizationDependentLossAvg

This object specifies the interval average Polarization
Dependent Loss in 1/100 dB for the interface.

1/100 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.30

coiOptIntervalPolarizationChangeRateAvg

This object specifies the interval average Polarization Change
Rate in 1/100 rad/s for the interface.

1/100 rad/sSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.31

coiOptIntervalPhaseNoiseAvg

This object specifies the interval average Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface.

1/1000 dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.32

coiOptIntervalLBCAvg

This object specifies the interval average Laser Bias Current
in 1/10 % for the interface.

1/10 %SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.828.1.2.3.1.33

coiOptIntervalTimestamp

This object specifies the timestamp, for the bucket specified
by 'coiOptIntervalNum', for the interface.

OctetString

.1.3.6.1.4.1.9.9.828.1.2.3.1.34

coiOpticalClientInfoTable

table

.1.3.6.1.4.1.9.9.828.1.3 · 1 row entry · 1 columns

Open in standard view

This table provides management information for optical's
client layer related attributes of interfaces with an ifType
of ethernetCsmacd(6).This parameter is applicable only for
client interfaces.

coiOpticalClientInfoEntry entry .1.3.6.1.4.1.9.9.828.1.3.1

An entry containing information for optical's
client layer related attributes of interfaces with an ifType
of ethernetCsmacd(6). Entries are created by the feature when
the interface discovers the neighbour's ethernet M…

Indexes

IF-MIBifIndex

Column	Syntax	OID
coiOpticalClientEthernetNeighbourMAC This object gives the neighbour MAC Address to which the interface is connected.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.9.9.828.1.3.1.1`