coiOptThreshRXPowerEnableMin
CISCO-OPTICAL-MIB ·
.1.3.6.1.4.1.9.9.828.1.2.1.1.23
Object
This object is used to configure the enablement of the threshold min Receive power for the interface.
Context
- MIB
- CISCO-OPTICAL-MIB
- OID
.1.3.6.1.4.1.9.9.828.1.2.1.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- coiOpticalThresholdEntry
- Table
- coiOpticalThresholdTable
- Siblings
- 40
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coiOptThreshIntervalType This object gives the interval type during which the
performance statistics are accumulated for the interface. | column | CoiIntervalType | .1.3.6.1.4.1.9.9.828.1.2.1.1.1 |
| coiOptThreshPhaseNoiseMin This object is used to configure the threshold of minimum
Fluctuations in the Phase of a Waveform for the interface in
1/1000 dB. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.10 |
| coiOptThreshLBCMin This object is used to configure the threshold of minumum
Laser Bias Current in 1/10%. | column | 1/10 % Integer32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.11 |
| coiOptThreshTXPowerMax This object is used to configure the threshold of maximum
Transmit power for the interface in 1/100 dBm. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.1.1.12 |
| coiOptThreshRXPowerMax This object is used to configure the threshold of maximum
Receive power for the interface in 1/100 dBm. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.1.1.13 |
| coiOptThreshOSNRMax This object is used to configure the threshold of maximum
Optical Signal to Noise Ratio for the interface in 1/100 dB. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.14 |
| coiOptThreshChromaticDispersionMax This object is used to configure the threshold of maximum
measure of spread of light pulse for the interface in ps/nm. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.15 |
| coiOptThreshDifferentialGroupDelayMax This object is used to configure the threshold of maximum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.16 |
| coiOptThreshSecondOrderPMDMax This object is used to configure the threshold of maximum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.17 |
| coiOptThreshPolarizationDependentLossMax This object is used to configure the threshold of maximum
Polarization Dependent Loss for the interface in 1/100 dB. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.18 |
| coiOptThreshPolarizationChangeRateMax This object is used to configure the threshold of maximum
Polarization Change Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.19 |
| coiOptThreshTXPowerMin This object is used to configure the threshold of minimum
Transmit power for the interface in 1/100 dBm. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.1.1.2 |
| coiOptThreshPhaseNoiseMax This object is used to configure the threshold of maximum
Fluctuations in the Phase of a Waveform in 1/1000 dB for the
interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.20 |
| coiOptThreshLBCMax This object is used to configure the threshold of maximum
Laser Bias Current in 1/10 % for the interface. | column | 1/10 % Integer32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.21 |
| coiOptThreshTXPowerEnableMin This object is used to configure the enablement of threshold
min Transmit power for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.22 |
| coiOptThreshOSNREnableMin This object is used to configure the enablement of the
threshold min Optical Signal to Noise Ratio for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.24 |
| coiOptThreshChromaticDispersionEnableMin This object is used to configure the enablement of the
threshold min measure of spread of light pulse for the
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.25 |
| coiOptThreshDifferentialGroupDelayEnableMin This object is used to configure the enablement of the
threshold min propagation time difference between eigenmodes X
and Y for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.26 |
| coiOptThreshSecondOrderPMDEnableMin This object is used to configure the enablement of the
threshold min Second Order Polarization Mode Dispersion for
the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.27 |
| coiOptThreshPolarizationDependentLossEnableMin This object is used to configure the enablement of the
threshold min Polarization Dependent Loss for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.28 |
| coiOptThreshPolarizationChangeRateEnableMin This object is used to configure the enablement of the
threshold min Polarization Change Rate for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.29 |
| coiOptThreshRXPowerMin This object is used to configure the threshold of minimum
Receive power for the interface in 1/100 dBm. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.1.1.3 |
| coiOptThreshPhaseNoiseEnableMin This object is used to configure the enablement of the
threshold min Fluctuations in the Phase of a Waveform for the
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.30 |
| coiOptThreshLBCEnableMin This object is used to configure the enablement of the
threshold min Laser Bias Current for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.31 |
| coiOptThreshTXPowerEnableMax This object is used to configure the enablement of the
threshold max Transmit power for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.32 |
| coiOptThreshRXPowerEnableMax This object is used to configure the enablement of the
threshold max Receive power for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.33 |
| coiOptThreshOSNREnableMax This object is used to configure the enablement of the
threshold max Optical Signal to Noise Ratio for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.34 |
| coiOptThreshChromaticDispersionEnableMax This object is used to configure the enablement of the
threshold max measure of spread of light pulse for the
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.35 |
| coiOptThreshDifferentialGroupDelayEnableMax This object is used to configure the enablement of the
threshold max propagation time difference between eigenmodes
X and Y for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.36 |
| coiOptThreshSecondOrderPMDEnableMax This object is used to configure the enablement of the
threshold max Second Order Polarization Mode Dispersion for the
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.37 |
| coiOptThreshPolarizationDependentLossEnableMax This object is used to configure the enablement of the
threshold max Polarization Dependent Loss for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.38 |
| coiOptThreshPolarizationChangeRateEnableMax This object is used to configure the enablement of the
threshold max Polarization Change Rate for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.39 |
| coiOptThreshOSNRMin This object is used to configure the threshold of minimum
Optical Signal to Noise Ratio for the interface in 1/100 dB. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.4 |
| coiOptThreshPhaseNoiseEnableMax This object is used to configure the enablement of the
threshold max Fluctuations in the Phase of a Waveform for the
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.40 |
| coiOptThreshLBCEnableMax This object is used to configure the enablement of the
threshold max Laser Bias Current for the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.828.1.2.1.1.41 |
| coiOptThreshChromaticDispersionMin This object is used to configure the threshold of minimum
measure of spread of light pulse for the interface in ps/nm. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.5 |
| coiOptThreshDifferentialGroupDelayMin This object is used to configure the threshold of minimum
propagation time difference between eigenmodes X and Y for the
interface in 1/100 ps. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.6 |
| coiOptThreshSecondOrderPMDMin This object is used to configure the threshold of minimum
Second Order Polarization Mode Dispersion for the interface in
1/100 ps^2. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.7 |
| coiOptThreshPolarizationDependentLossMin This object is used to configure the threshold of minimum
Polarization Dependent Loss for the interface in 1/100 dB. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.8 |
| coiOptThreshPolarizationChangeRateMin This object is used to configure the threshold of minimum
Polarization Change Rate for the interface in 1/100 rad/s. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.1.1.9 |