coiOpticalIntervalEntry
CISCO-OPTICAL-MIB ·
.1.3.6.1.4.1.9.9.828.1.2.3.1
Object
row
An entry containing interval information on optical layer related attributes of interfaces with an ifType opticalChannel(195). Entries are created by the feature when a new interface is added to the ifTable.
Context
- MIB
- CISCO-OPTICAL-MIB
- OID
.1.3.6.1.4.1.9.9.828.1.2.3.1- Type
- row
- Status
- current
- Parent
- coiOpticalIntervalTable
- Table
- coiOpticalIntervalTable
- Children
- 34
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coiOptIntervalLane This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an aggregate… | column | Integer32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.1 |
| coiOptIntervalPolarizationDependentLossMax This object specifies the interval maximum Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.10 |
| coiOptIntervalPolarizationChangeRateMax This object specifies the interval maximum Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.11 |
| coiOptIntervalPhaseNoiseMax This object specifies the interval maximum Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.12 |
| coiOptIntervalLBCMax This object specifies the interval maximum Laser Bias Current
in 1/10% for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.13 |
| coiOptIntervalTXPowerMin This object specifies the interval minimum Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.14 |
| coiOptIntervalRXPowerMin This object specifies the interval minimum Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.15 |
| coiOptIntervalOSNRMin This object specifies the interval minimum Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.16 |
| coiOptIntervalChromaticDispersionMin This object specifies the interval minimum measure of spread
of light pulse in ps/nm for the interface. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.17 |
| coiOptIntervalDifferentialGroupDelayMin This object specifies the interval minimum propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.18 |
| coiOptIntervalSecondOrderPMDMin This object specifies the interval minimum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.19 |
| coiOptIntervalIntervalType This object gives the interval type during which the
performance statistics are accumulated. | column | CoiIntervalType | .1.3.6.1.4.1.9.9.828.1.2.3.1.2 |
| coiOptIntervalPolarizationDependentLossMin This object specifies the interval minimum Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.20 |
| coiOptIntervalPolarizationChangeRateMin This object specifies the interval minimum Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.21 |
| coiOptIntervalPhaseNoiseMin This object specifies the interval minimum Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.22 |
| coiOptIntervalLBCMin This object specifies the interval minimum Laser Bias Current
in 1/10% for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.23 |
| coiOptIntervalTXPowerAvg This object specifies the interval average Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.24 |
| coiOptIntervalRXPowerAvg This object specifies the interval average Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.25 |
| coiOptIntervalOSNRAvg This object specifies the interval average Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.26 |
| coiOptIntervalChromaticDispersionAvg This object specifies the interval average measure of spread
of light pulse in ps/nm for the interface. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.27 |
| coiOptIntervalDifferentialGroupDelayAvg This object specifies the interval average propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.28 |
| coiOptIntervalSecondOrderPMDAvg This object specifies the interval average Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.29 |
| coiOptIntervalNum This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, a… | column | Integer32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.3 |
| coiOptIntervalPolarizationDependentLossAvg This object specifies the interval average Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.30 |
| coiOptIntervalPolarizationChangeRateAvg This object specifies the interval average Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.31 |
| coiOptIntervalPhaseNoiseAvg This object specifies the interval average Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.32 |
| coiOptIntervalLBCAvg This object specifies the interval average Laser Bias Current
in 1/10 % for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.33 |
| coiOptIntervalTimestamp This object specifies the timestamp, for the bucket specified
by 'coiOptIntervalNum', for the interface. | column | OctetString | .1.3.6.1.4.1.9.9.828.1.2.3.1.34 |
| coiOptIntervalTXPowerMax This object specifies the interval maximum Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.4 |
| coiOptIntervalRXPowerMax This object specifies the interval maximum Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.5 |
| coiOptIntervalOSNRMax This object specifies the interval maximum Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.6 |
| coiOptIntervalChromaticDispersionMax This object specifies the interval maximum measure of spread
of light pulse for the interface in ps/nm. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.7 |
| coiOptIntervalDifferentialGroupDelayMax This object specifies the interval maximum propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.8 |
| coiOptIntervalSecondOrderPMDMax This object specifies the interval maximum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| coiOptIntervalLane This object specifies the lane number for the optical
interface. Each optical controller is divided into data lanes
with each lane operating at some data rate, giving an aggregate… | column | Integer32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.1 |
| coiOptIntervalIntervalType This object gives the interval type during which the
performance statistics are accumulated. | column | CoiIntervalType | .1.3.6.1.4.1.9.9.828.1.2.3.1.2 |
| coiOptIntervalNum This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, a… | column | Integer32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.3 |