coiOptIntervalDifferentialGroupDelayAvg

CISCO-OPTICAL-MIB · .1.3.6.1.4.1.9.9.828.1.2.3.1.28
MIB view Table view

Object

column 1/100 ps SNMPv2-SMIInteger32 
This object specifies the interval average propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface.

Context

MIB
CISCO-OPTICAL-MIB
OID
.1.3.6.1.4.1.9.9.828.1.2.3.1.28
Type
column
Access
readonly
Status
current
Units
1/100 ps
Parent
coiOpticalIntervalEntry
Table
coiOpticalIntervalTable
Siblings
33

Syntax

1/100 ps SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
coiOptIntervalLane
This object specifies the lane number for the optical interface. Each optical controller is divided into data lanes with each lane operating at some data rate, giving an aggregate…
columnInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.1
coiOptIntervalPolarizationDependentLossMax
This object specifies the interval maximum Polarization Dependent Loss in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.10
coiOptIntervalPolarizationChangeRateMax
This object specifies the interval maximum Polarization Change Rate in 1/100 rad/s for the interface.
column1/100 rad/s SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.11
coiOptIntervalPhaseNoiseMax
This object specifies the interval maximum Fluctuations in the Phase of a Waveform in 1/1000 dB for the interface.
column1/1000 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.12
coiOptIntervalLBCMax
This object specifies the interval maximum Laser Bias Current in 1/10% for the interface.
column1/10 % SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.13
coiOptIntervalTXPowerMin
This object specifies the interval minimum Transmit power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.14
coiOptIntervalRXPowerMin
This object specifies the interval minimum Receive power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.15
coiOptIntervalOSNRMin
This object specifies the interval minimum Optical Signal to Noise Ratio in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.16
coiOptIntervalChromaticDispersionMin
This object specifies the interval minimum measure of spread of light pulse in ps/nm for the interface.
columnps/nm SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.17
coiOptIntervalDifferentialGroupDelayMin
This object specifies the interval minimum propagation time difference between eigenmodes X and Y in 1/100 ps for the interface.
column1/100 ps SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.18
coiOptIntervalSecondOrderPMDMin
This object specifies the interval minimum Second Order Polarization Mode Dispersion in 1/100 ps^2 for the interface.
column1/100 ps^2 SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.19
coiOptIntervalIntervalType
This object gives the interval type during which the performance statistics are accumulated.
columnCoiIntervalType.1.3.6.1.4.1.9.9.828.1.2.3.1.2
coiOptIntervalPolarizationDependentLossMin
This object specifies the interval minimum Polarization Dependent Loss in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.20
coiOptIntervalPolarizationChangeRateMin
This object specifies the interval minimum Polarization Change Rate in 1/100 rad/s for the interface.
column1/100 rad/s SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.21
coiOptIntervalPhaseNoiseMin
This object specifies the interval minimum Fluctuations in the Phase of a Waveform in 1/1000 dB for the interface.
column1/1000 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.22
coiOptIntervalLBCMin
This object specifies the interval minimum Laser Bias Current in 1/10% for the interface.
column1/10 % SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.23
coiOptIntervalTXPowerAvg
This object specifies the interval average Transmit power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.24
coiOptIntervalRXPowerAvg
This object specifies the interval average Receive power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.25
coiOptIntervalOSNRAvg
This object specifies the interval average Optical Signal to Noise Ratio in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.26
coiOptIntervalChromaticDispersionAvg
This object specifies the interval average measure of spread of light pulse in ps/nm for the interface.
columnps/nm SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.27
coiOptIntervalSecondOrderPMDAvg
This object specifies the interval average Second Order Polarization Mode Dispersion in 1/100 ps^2 for the interface.
column1/100 ps^2 SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.29
coiOptIntervalNum
This object identifies the interval for which the set of interval performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, a…
columnInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.3
coiOptIntervalPolarizationDependentLossAvg
This object specifies the interval average Polarization Dependent Loss in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.30
coiOptIntervalPolarizationChangeRateAvg
This object specifies the interval average Polarization Change Rate in 1/100 rad/s for the interface.
column1/100 rad/s SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.31
coiOptIntervalPhaseNoiseAvg
This object specifies the interval average Fluctuations in the Phase of a Waveform in 1/1000 dB for the interface.
column1/1000 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.32
coiOptIntervalLBCAvg
This object specifies the interval average Laser Bias Current in 1/10 % for the interface.
column1/10 % SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.33
coiOptIntervalTimestamp
This object specifies the timestamp, for the bucket specified by 'coiOptIntervalNum', for the interface.
columnOctetString.1.3.6.1.4.1.9.9.828.1.2.3.1.34
coiOptIntervalTXPowerMax
This object specifies the interval maximum Transmit power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.4
coiOptIntervalRXPowerMax
This object specifies the interval maximum Receive power in 1/100 dBm for the interface.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.3.1.5
coiOptIntervalOSNRMax
This object specifies the interval maximum Optical Signal to Noise Ratio in 1/100 dB for the interface.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.6
coiOptIntervalChromaticDispersionMax
This object specifies the interval maximum measure of spread of light pulse for the interface in ps/nm.
columnps/nm SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.7
coiOptIntervalDifferentialGroupDelayMax
This object specifies the interval maximum propagation time difference between eigenmodes X and Y for the interface in 1/100 ps.
column1/100 ps SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.8
coiOptIntervalSecondOrderPMDMax
This object specifies the interval maximum Second Order Polarization Mode Dispersion in 1/100 ps^2 for the interface.
column1/100 ps^2 SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.3.1.9